<status value="active"/> <experimental value="false"/> <date value="2026-03-17T21:02:03.8104715+00:00"/> <publisher value="FHIR Infrastructure"/> <contact> <name value="FHIR Infrastructure"/> <telecom> <system value="url"/> <value value="http://www.hl7.org/Special/committees/fiwg"/> </telecom> </contact> <description value="R5: `SubstanceDefinition.sourceMaterial` (new:BackboneElement)"/> <jurisdiction> <coding> <system value="http://unstats.un.org/unsd/methods/m49/m49.htm"/> <code value="001"/> <display value="World"/> </coding> </jurisdiction> <purpose value="This extension is part of the cross-version definitions generated to enable use of the element `SubstanceDefinition.sourceMaterial` as defined in FHIR R5 in FHIR STU3. The source element is defined as: `SubstanceDefinition.sourceMaterial` 0..1 `BackboneElement` Across FHIR versions, the element set has been mapped as: * R5: `SubstanceDefinition.sourceMaterial` 0..1 `BackboneElement` Following are the generation technical comments: Element `SubstanceDefinition.sourceMaterial` is not mapped to FHIR STU3, since FHIR R5 `SubstanceDefinition` is not mapped. Element `SubstanceDefinition.sourceMaterial` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <fhirVersion value="3.0.2"/> <mapping> <identity value="rim"/> <uri value="http://hl7.org/v3"/> <name value="RIM Mapping"/> </mapping> <kind value="complex-type"/> <abstract value="false"/> <contextType value="resource"/> <context value="Basic"/> <type value="Extension"/> <baseDefinition value="http://hl7.org/fhir/StructureDefinition/Extension"/> <derivation value="constraint"/> <snapshot> <element id="Extension"> <path value="Extension"/> <short value="R5: Material or taxonomic/anatomical source (new)"/> <definition value="R5: `SubstanceDefinition.sourceMaterial` (new:BackboneElement)"/> <comment value="Element `SubstanceDefinition.sourceMaterial` is not mapped to FHIR STU3, since FHIR R5 `SubstanceDefinition` is not mapped. Element `SubstanceDefinition.sourceMaterial` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="1"/> <base> <path value="Extension"/> <min value="0"/> <max value="*"/> </base> <condition value="ele-1"/> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() | (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <constraint> <key value="ext-1"/> <severity value="error"/> <human value="Must have either extensions or value[x], not both"/> <expression value="extension.exists() != value.exists()"/> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])"/> <source value="http://hl7.org/fhir/StructureDefinition/Extension"/> </constraint> <isModifier value="false"/> </element> <element id="Extension.id"> <path value="Extension.id"/> <representation value="xmlAttr"/> <short value="xml:id (or equivalent in JSON)"/> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension"> <path value="Extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <ordered value="false"/> <rules value="open"/> </slicing> <short value="Extension"/> <definition value="An Extension"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> </element> <element id="Extension.extension:type"> <path value="Extension.extension"/> <sliceName value="type"/> <short value="R5: Classification of the origin of the raw material. e.g. cat hair is an Animal source type (new)"/> <definition value="R5: `SubstanceDefinition.sourceMaterial.type` (new:CodeableConcept)"/> <comment value="Element `SubstanceDefinition.sourceMaterial.type` is part of an existing definition because parent element `SubstanceDefinition.sourceMaterial` requires a cross-version extension. Element `SubstanceDefinition.sourceMaterial.type` is not mapped to FHIR STU3, since FHIR R5 `SubstanceDefinition` is not mapped. Element `SubstanceDefinition.sourceMaterial.type` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `SubstanceDefinition.sourceMaterial.type` is part of an existing definition because parent element `SubstanceDefinition.sourceMaterial` requires a cross-version extension. Element `SubstanceDefinition.sourceMaterial.type` is not mapped to FHIR STU3, since FHIR R5 `SubstanceDefinition` is not mapped. Element `SubstanceDefinition.sourceMaterial.type` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="1"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> </element> <element id="Extension.extension:type.id"> <path value="Extension.extension.id"/> <representation value="xmlAttr"/> <short value="xml:id (or equivalent in JSON)"/> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:type.extension"> <path value="Extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <rules value="open"/> </slicing> <short value="Additional Content defined by implementations"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:type.url"> <path value="Extension.extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <code value="uri"/> </type> <fixedUri value="type"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:type.value[x]"> <path value="Extension.extension.value[x]"/> <short value="Classification of the origin of the raw material. e.g. cat hair is an Animal source type"/> <definition value="A classification that provides the origin of the raw material. Example: cat hair would be an Animal source type."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> <binding> <strength value="example"/> <description value="A classification that provides the origin of the substance raw material."/> <valueSetUri value="http://hl7.org/fhir/uv/xver/ValueSet/R5-substance-source-material-type-for-R3|0.1.0"/> </binding> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:genus"> <path value="Extension.extension"/> <sliceName value="genus"/> <short value="R5: The genus of an organism e.g. the Latin epithet of the plant/animal scientific name (new)"/> <definition value="R5: `SubstanceDefinition.sourceMaterial.genus` (new:CodeableConcept)"/> <comment value="Element `SubstanceDefinition.sourceMaterial.genus` is part of an existing definition because parent element `SubstanceDefinition.sourceMaterial` requires a cross-version extension. Element `SubstanceDefinition.sourceMaterial.genus` is not mapped to FHIR STU3, since FHIR R5 `SubstanceDefinition` is not mapped. Element `SubstanceDefinition.sourceMaterial.genus` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `SubstanceDefinition.sourceMaterial.genus` is part of an existing definition because parent element `SubstanceDefinition.sourceMaterial` requires a cross-version extension. Element `SubstanceDefinition.sourceMaterial.genus` is not mapped to FHIR STU3, since FHIR R5 `SubstanceDefinition` is not mapped. Element `SubstanceDefinition.sourceMaterial.genus` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="1"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> </element> <element id="Extension.extension:genus.id"> <path value="Extension.extension.id"/> <representation value="xmlAttr"/> <short value="xml:id (or equivalent in JSON)"/> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:genus.extension"> <path value="Extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <rules value="open"/> </slicing> <short value="Additional Content defined by implementations"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:genus.url"> <path value="Extension.extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <code value="uri"/> </type> <fixedUri value="genus"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:genus.value[x]"> <path value="Extension.extension.value[x]"/> <short value="The genus of an organism e.g. the Latin epithet of the plant/animal scientific name"/> <definition value="The genus of an organism, typically referring to the Latin epithet of the genus element of the plant/animal scientific name."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> <binding> <strength value="example"/> <description value="The genus of an organism, typically referring to the Latin epithet of the genus element of the plant/animal scientific name."/> <valueSetUri value="http://hl7.org/fhir/uv/xver/ValueSet/R5-substance-source-material-genus-for-R3|0.1.0"/> </binding> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:species"> <path value="Extension.extension"/> <sliceName value="species"/> <short value="R5: The species of an organism e.g. the Latin epithet of the species of the plant/animal (new)"/> <definition value="R5: `SubstanceDefinition.sourceMaterial.species` (new:CodeableConcept)"/> <comment value="Element `SubstanceDefinition.sourceMaterial.species` is part of an existing definition because parent element `SubstanceDefinition.sourceMaterial` requires a cross-version extension. Element `SubstanceDefinition.sourceMaterial.species` is not mapped to FHIR STU3, since FHIR R5 `SubstanceDefinition` is not mapped. Element `SubstanceDefinition.sourceMaterial.species` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `SubstanceDefinition.sourceMaterial.species` is part of an existing definition because parent element `SubstanceDefinition.sourceMaterial` requires a cross-version extension. Element `SubstanceDefinition.sourceMaterial.species` is not mapped to FHIR STU3, since FHIR R5 `SubstanceDefinition` is not mapped. Element `SubstanceDefinition.sourceMaterial.species` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="1"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> </element> <element id="Extension.extension:species.id"> <path value="Extension.extension.id"/> <representation value="xmlAttr"/> <short value="xml:id (or equivalent in JSON)"/> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:species.extension"> <path value="Extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <rules value="open"/> </slicing> <short value="Additional Content defined by implementations"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:species.url"> <path value="Extension.extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <code value="uri"/> </type> <fixedUri value="species"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:species.value[x]"> <path value="Extension.extension.value[x]"/> <short value="The species of an organism e.g. the Latin epithet of the species of the plant/animal"/> <definition value="The species of an organism, typically referring to the Latin epithet of the species of the plant/animal."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> <binding> <strength value="example"/> <description value="A species of origin a substance raw material."/> <valueSetUri value="http://hl7.org/fhir/uv/xver/ValueSet/R5-substance-source-material-species-for-R3|0.1.0"/> </binding> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:part"> <path value="Extension.extension"/> <sliceName value="part"/> <short value="R5: An anatomical origin of the source material within an organism (new)"/> <definition value="R5: `SubstanceDefinition.sourceMaterial.part` (new:CodeableConcept)"/> <comment value="Element `SubstanceDefinition.sourceMaterial.part` is part of an existing definition because parent element `SubstanceDefinition.sourceMaterial` requires a cross-version extension. Element `SubstanceDefinition.sourceMaterial.part` is not mapped to FHIR STU3, since FHIR R5 `SubstanceDefinition` is not mapped. Element `SubstanceDefinition.sourceMaterial.part` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `SubstanceDefinition.sourceMaterial.part` is part of an existing definition because parent element `SubstanceDefinition.sourceMaterial` requires a cross-version extension. Element `SubstanceDefinition.sourceMaterial.part` is not mapped to FHIR STU3, since FHIR R5 `SubstanceDefinition` is not mapped. Element `SubstanceDefinition.sourceMaterial.part` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="1"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> </element> <element id="Extension.extension:part.id"> <path value="Extension.extension.id"/> <representation value="xmlAttr"/> <short value="xml:id (or equivalent in JSON)"/> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:part.extension"> <path value="Extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <rules value="open"/> </slicing> <short value="Additional Content defined by implementations"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:part.url"> <path value="Extension.extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <code value="uri"/> </type> <fixedUri value="part"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:part.value[x]"> <path value="Extension.extension.value[x]"/> <short value="An anatomical origin of the source material within an organism"/> <definition value="An anatomical origin of the source material within an organism."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> <binding> <strength value="example"/> <description value="An anatomical origin of the source material within an organism."/> <valueSetUri value="http://hl7.org/fhir/uv/xver/ValueSet/R5-substance-source-material-part-for-R3|0.1.0"/> </binding> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:countryOfOrigin"> <path value="Extension.extension"/> <sliceName value="countryOfOrigin"/> <short value="R5: The country or countries where the material is harvested (new)"/> <definition value="R5: `SubstanceDefinition.sourceMaterial.countryOfOrigin` (new:CodeableConcept)"/> <comment value="Element `SubstanceDefinition.sourceMaterial.countryOfOrigin` is part of an existing definition because parent element `SubstanceDefinition.sourceMaterial` requires a cross-version extension. Element `SubstanceDefinition.sourceMaterial.countryOfOrigin` is not mapped to FHIR STU3, since FHIR R5 `SubstanceDefinition` is not mapped. Element `SubstanceDefinition.sourceMaterial.countryOfOrigin` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `SubstanceDefinition.sourceMaterial.countryOfOrigin` is part of an existing definition because parent element `SubstanceDefinition.sourceMaterial` requires a cross-version extension. Element `SubstanceDefinition.sourceMaterial.countryOfOrigin` is not mapped to FHIR STU3, since FHIR R5 `SubstanceDefinition` is not mapped. Element `SubstanceDefinition.sourceMaterial.countryOfOrigin` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> </element> <element id="Extension.extension:countryOfOrigin.id"> <path value="Extension.extension.id"/> <representation value="xmlAttr"/> <short value="xml:id (or equivalent in JSON)"/> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:countryOfOrigin.extension"> <path value="Extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <rules value="open"/> </slicing> <short value="Additional Content defined by implementations"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:countryOfOrigin.url"> <path value="Extension.extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <code value="uri"/> </type> <fixedUri value="countryOfOrigin"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:countryOfOrigin.value[x]"> <path value="Extension.extension.value[x]"/> <short value="The country or countries where the material is harvested"/> <definition value="The country or countries where the material is harvested."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.url"> <path value="Extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <code value="uri"/> </type> <fixedUri value="http://hl7.org/fhir/5.0/StructureDefinition/extension-SubstanceDefinition.sourceMaterial"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.value[x]"> <path value="Extension.value[x]"/> <short value="Value of extension"/> <definition value="Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list)."/> <min value="0"/> <max value="0"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="base64Binary"/> </type> <type> <code value="boolean"/> </type> <type> <code value="code"/> </type> <type> <code value="date"/> </type> <type> <code value="dateTime"/> </type> <type> <code value="decimal"/> </type> <type> <code value="id"/> </type> <type> <code value="instant"/> </type> <type> <code value="integer"/> </type> <type> <code value="markdown"/> </type> <type> <code value="oid"/> </type> <type> <code value="positiveInt"/> </type> <type> <code value="string"/> </type> <type> <code value="time"/> </type> <type> <code value="unsignedInt"/> </type> <type> <code value="uri"/> </type> <type> <code value="Address"/> </type> <type> <code value="Age"/> </type> <type> <code value="Annotation"/> </type> <type> <code value="Attachment"/> </type> <type> <code value="CodeableConcept"/> </type> <type> <code value="Coding"/> </type> <type> <code value="ContactPoint"/> </type> <type> <code value="Count"/> </type> <type> <code value="Distance"/> </type> <type> <code value="Duration"/> </type> <type> <code value="HumanName"/> </type> <type> <code value="Identifier"/> </type> <type> <code value="Money"/> </type> <type> <code value="Period"/> </type> <type> <code value="Quantity"/> </type> <type> <code value="Range"/> </type> <type> <code value="Ratio"/> </type> <type> <code value="Reference"/> </type> <type> <code value="SampledData"/> </type> <type> <code value="Signature"/> </type> <type> <code value="Timing"/> </type> <type> <code value="Meta"/> </type> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> </snapshot> <differential> <element id="Extension"> <path value="Extension"/> <short value="R5: Material or taxonomic/anatomical source (new)"/> <definition value="R5: `SubstanceDefinition.sourceMaterial` (new:BackboneElement)"/> <comment value="Element `SubstanceDefinition.sourceMaterial` is not mapped to FHIR STU3, since FHIR R5 `SubstanceDefinition` is not mapped. Element `SubstanceDefinition.sourceMaterial` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="1"/> <base> <path value="Extension"/> <min value="0"/> <max value="*"/> </base> <isModifier value="false"/> </element> <element id="Extension.extension"> <path value="Extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <ordered value="false"/> <rules value="open"/> </slicing> <min value="0"/> <max value="*"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:type"> <path value="Extension.extension"/> <sliceName value="type"/> <short value="R5: Classification of the origin of the raw material. e.g. cat hair is an Animal source type (new)"/> <definition value="R5: `SubstanceDefinition.sourceMaterial.type` (new:CodeableConcept)"/> <comment value="Element `SubstanceDefinition.sourceMaterial.type` is part of an existing definition because parent element `SubstanceDefinition.sourceMaterial` requires a cross-version extension. Element `SubstanceDefinition.sourceMaterial.type` is not mapped to FHIR STU3, since FHIR R5 `SubstanceDefinition` is not mapped. Element `SubstanceDefinition.sourceMaterial.type` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `SubstanceDefinition.sourceMaterial.type` is part of an existing definition because parent element `SubstanceDefinition.sourceMaterial` requires a cross-version extension. Element `SubstanceDefinition.sourceMaterial.type` is not mapped to FHIR STU3, since FHIR R5 `SubstanceDefinition` is not mapped. Element `SubstanceDefinition.sourceMaterial.type` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:type.url"> <path value="Extension.extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="type"/> </element> <element id="Extension.extension:type.value[x]"> <path value="Extension.extension.value[x]"/> <short value="Classification of the origin of the raw material. e.g. cat hair is an Animal source type"/> <definition value="A classification that provides the origin of the raw material. Example: cat hair would be an Animal source type."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> <binding> <strength value="example"/> <description value="A classification that provides the origin of the substance raw material."/> <valueSetUri value="http://hl7.org/fhir/uv/xver/ValueSet/R5-substance-source-material-type-for-R3|0.1.0"/> </binding> </element> <element id="Extension.extension:genus"> <path value="Extension.extension"/> <sliceName value="genus"/> <short value="R5: The genus of an organism e.g. the Latin epithet of the plant/animal scientific name (new)"/> <definition value="R5: `SubstanceDefinition.sourceMaterial.genus` (new:CodeableConcept)"/> <comment value="Element `SubstanceDefinition.sourceMaterial.genus` is part of an existing definition because parent element `SubstanceDefinition.sourceMaterial` requires a cross-version extension. Element `SubstanceDefinition.sourceMaterial.genus` is not mapped to FHIR STU3, since FHIR R5 `SubstanceDefinition` is not mapped. Element `SubstanceDefinition.sourceMaterial.genus` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `SubstanceDefinition.sourceMaterial.genus` is part of an existing definition because parent element `SubstanceDefinition.sourceMaterial` requires a cross-version extension. Element `SubstanceDefinition.sourceMaterial.genus` is not mapped to FHIR STU3, since FHIR R5 `SubstanceDefinition` is not mapped. Element `SubstanceDefinition.sourceMaterial.genus` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:genus.url"> <path value="Extension.extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="genus"/> </element> <element id="Extension.extension:genus.value[x]"> <path value="Extension.extension.value[x]"/> <short value="The genus of an organism e.g. the Latin epithet of the plant/animal scientific name"/> <definition value="The genus of an organism, typically referring to the Latin epithet of the genus element of the plant/animal scientific name."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> <binding> <strength value="example"/> <description value="The genus of an organism, typically referring to the Latin epithet of the genus element of the plant/animal scientific name."/> <valueSetUri value="http://hl7.org/fhir/uv/xver/ValueSet/R5-substance-source-material-genus-for-R3|0.1.0"/> </binding> </element> <element id="Extension.extension:species"> <path value="Extension.extension"/> <sliceName value="species"/> <short value="R5: The species of an organism e.g. the Latin epithet of the species of the plant/animal (new)"/> <definition value="R5: `SubstanceDefinition.sourceMaterial.species` (new:CodeableConcept)"/> <comment value="Element `SubstanceDefinition.sourceMaterial.species` is part of an existing definition because parent element `SubstanceDefinition.sourceMaterial` requires a cross-version extension. Element `SubstanceDefinition.sourceMaterial.species` is not mapped to FHIR STU3, since FHIR R5 `SubstanceDefinition` is not mapped. Element `SubstanceDefinition.sourceMaterial.species` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `SubstanceDefinition.sourceMaterial.species` is part of an existing definition because parent element `SubstanceDefinition.sourceMaterial` requires a cross-version extension. Element `SubstanceDefinition.sourceMaterial.species` is not mapped to FHIR STU3, since FHIR R5 `SubstanceDefinition` is not mapped. Element `SubstanceDefinition.sourceMaterial.species` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:species.url"> <path value="Extension.extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="species"/> </element> <element id="Extension.extension:species.value[x]"> <path value="Extension.extension.value[x]"/> <short value="The species of an organism e.g. the Latin epithet of the species of the plant/animal"/> <definition value="The species of an organism, typically referring to the Latin epithet of the species of the plant/animal."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> <binding> <strength value="example"/> <description value="A species of origin a substance raw material."/> <valueSetUri value="http://hl7.org/fhir/uv/xver/ValueSet/R5-substance-source-material-species-for-R3|0.1.0"/> </binding> </element> <element id="Extension.extension:part"> <path value="Extension.extension"/> <sliceName value="part"/> <short value="R5: An anatomical origin of the source material within an organism (new)"/> <definition value="R5: `SubstanceDefinition.sourceMaterial.part` (new:CodeableConcept)"/> <comment value="Element `SubstanceDefinition.sourceMaterial.part` is part of an existing definition because parent element `SubstanceDefinition.sourceMaterial` requires a cross-version extension. Element `SubstanceDefinition.sourceMaterial.part` is not mapped to FHIR STU3, since FHIR R5 `SubstanceDefinition` is not mapped. Element `SubstanceDefinition.sourceMaterial.part` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `SubstanceDefinition.sourceMaterial.part` is part of an existing definition because parent element `SubstanceDefinition.sourceMaterial` requires a cross-version extension. Element `SubstanceDefinition.sourceMaterial.part` is not mapped to FHIR STU3, since FHIR R5 `SubstanceDefinition` is not mapped. Element `SubstanceDefinition.sourceMaterial.part` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:part.url"> <path value="Extension.extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="part"/> </element> <element id="Extension.extension:part.value[x]"> <path value="Extension.extension.value[x]"/> <short value="An anatomical origin of the source material within an organism"/> <definition value="An anatomical origin of the source material within an organism."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> <binding> <strength value="example"/> <description value="An anatomical origin of the source material within an organism."/> <valueSetUri value="http://hl7.org/fhir/uv/xver/ValueSet/R5-substance-source-material-part-for-R3|0.1.0"/> </binding> </element> <element id="Extension.extension:countryOfOrigin"> <path value="Extension.extension"/> <sliceName value="countryOfOrigin"/> <short value="R5: The country or countries where the material is harvested (new)"/> <definition value="R5: `SubstanceDefinition.sourceMaterial.countryOfOrigin` (new:CodeableConcept)"/> <comment value="Element `SubstanceDefinition.sourceMaterial.countryOfOrigin` is part of an existing definition because parent element `SubstanceDefinition.sourceMaterial` requires a cross-version extension. Element `SubstanceDefinition.sourceMaterial.countryOfOrigin` is not mapped to FHIR STU3, since FHIR R5 `SubstanceDefinition` is not mapped. Element `SubstanceDefinition.sourceMaterial.countryOfOrigin` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `SubstanceDefinition.sourceMaterial.countryOfOrigin` is part of an existing definition because parent element `SubstanceDefinition.sourceMaterial` requires a cross-version extension. Element `SubstanceDefinition.sourceMaterial.countryOfOrigin` is not mapped to FHIR STU3, since FHIR R5 `SubstanceDefinition` is not mapped. Element `SubstanceDefinition.sourceMaterial.countryOfOrigin` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="*"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:countryOfOrigin.url"> <path value="Extension.extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="countryOfOrigin"/> </element> <element id="Extension.extension:countryOfOrigin.value[x]"> <path value="Extension.extension.value[x]"/> <short value="The country or countries where the material is harvested"/> <definition value="The country or countries where the material is harvested."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> </element> <element id="Extension.url"> <path value="Extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="http://hl7.org/fhir/5.0/StructureDefinition/extension-SubstanceDefinition.sourceMaterial"/> </element> <element id="Extension.value[x]"> <path value="Extension.value[x]"/> <min value="0"/> <max value="0"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> </element> </differential> </StructureDefinition>

Generated Narrative: StructureDefinition ext-R5-SubstanceDefinition.sourceMaterial

Name	Card.	Type	Description & Constraints
Extension	0..1	Extension	R5: Material or taxonomic/anatomical source (new)
Slices for extension	0..*	Extension	Extension Slice: Unordered, Open by value:url
extension:type	0..1	Extension	R5: Classification of the origin of the raw material. e.g. cat hair is an Animal source type (new)
url	1..1	uri	"type"
value[x]	0..1	CodeableConcept	Classification of the origin of the raw material. e.g. cat hair is an Animal source type Binding: R5SubstanceSourceMaterialTypeForR3 (0.1.0) (example): A classification that provides the origin of the substance raw material.
extension:genus	0..1	Extension	R5: The genus of an organism e.g. the Latin epithet of the plant/animal scientific name (new)
url	1..1	uri	"genus"
value[x]	0..1	CodeableConcept	The genus of an organism e.g. the Latin epithet of the plant/animal scientific name Binding: R5SubstanceSourceMaterialGenusForR3 (0.1.0) (example): The genus of an organism, typically referring to the Latin epithet of the genus element of the plant/animal scientific name.
extension:species	0..1	Extension	R5: The species of an organism e.g. the Latin epithet of the species of the plant/animal (new)
url	1..1	uri	"species"
value[x]	0..1	CodeableConcept	The species of an organism e.g. the Latin epithet of the species of the plant/animal Binding: R5SubstanceSourceMaterialSpeciesForR3 (0.1.0) (example): A species of origin a substance raw material.
extension:part	0..1	Extension	R5: An anatomical origin of the source material within an organism (new)
url	1..1	uri	"part"
value[x]	0..1	CodeableConcept	An anatomical origin of the source material within an organism Binding: R5SubstanceSourceMaterialPartForR3 (0.1.0) (example): An anatomical origin of the source material within an organism.
extension:countryOfOrigin	0..*	Extension	R5: The country or countries where the material is harvested (new)
url	1..1	uri	"countryOfOrigin"
value[x]	0..1	CodeableConcept	The country or countries where the material is harvested
url	1..1	uri	"http://hl7.org/fhir/5.0/StructureDefinition/extension-SubstanceDefinition.sourceMaterial"
value[x]	0..0		Value of extension
Documentation for this format