<status value="active"/> <experimental value="false"/> <date value="2026-03-17T21:02:03.8104715+00:00"/> <publisher value="FHIR Infrastructure"/> <contact> <name value="FHIR Infrastructure"/> <telecom> <system value="url"/> <value value="http://www.hl7.org/Special/committees/fiwg"/> </telecom> </contact> <description value="R5: `SpecimenDefinition.typeTested` (new:BackboneElement)"/> <jurisdiction> <coding> <system value="http://unstats.un.org/unsd/methods/m49/m49.htm"/> <code value="001"/> <display value="World"/> </coding> </jurisdiction> <purpose value="This extension is part of the cross-version definitions generated to enable use of the element `SpecimenDefinition.typeTested` as defined in FHIR R5 in FHIR STU3. The source element is defined as: `SpecimenDefinition.typeTested` 0..* `BackboneElement` Across FHIR versions, the element set has been mapped as: * R5: `SpecimenDefinition.typeTested` 0..* `BackboneElement` Following are the generation technical comments: Element `SpecimenDefinition.typeTested` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <fhirVersion value="3.0.2"/> <mapping> <identity value="rim"/> <uri value="http://hl7.org/v3"/> <name value="RIM Mapping"/> </mapping> <kind value="complex-type"/> <abstract value="false"/> <contextType value="resource"/> <context value="Basic"/> <type value="Extension"/> <baseDefinition value="http://hl7.org/fhir/StructureDefinition/Extension"/> <derivation value="constraint"/> <snapshot> <element id="Extension"> <path value="Extension"/> <short value="R5: Specimen in container intended for testing by lab (new)"/> <definition value="R5: `SpecimenDefinition.typeTested` (new:BackboneElement)"/> <comment value="Element `SpecimenDefinition.typeTested` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="*"/> <base> <path value="Extension"/> <min value="0"/> <max value="*"/> </base> <condition value="ele-1"/> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() | (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <constraint> <key value="ext-1"/> <severity value="error"/> <human value="Must have either extensions or value[x], not both"/> <expression value="extension.exists() != value.exists()"/> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])"/> <source value="http://hl7.org/fhir/StructureDefinition/Extension"/> </constraint> <isModifier value="false"/> </element> <element id="Extension.id"> <path value="Extension.id"/> <representation value="xmlAttr"/> <short value="xml:id (or equivalent in JSON)"/> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension"> <path value="Extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <ordered value="false"/> <rules value="open"/> </slicing> <short value="Extension"/> <definition value="An Extension"/> <min value="1"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> </element> <element id="Extension.extension:isDerived"> <path value="Extension.extension"/> <sliceName value="isDerived"/> <short value="R5: Primary or secondary specimen (new)"/> <definition value="R5: `SpecimenDefinition.typeTested.isDerived` (new:boolean)"/> <comment value="Element `SpecimenDefinition.typeTested.isDerived` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension. Element `SpecimenDefinition.typeTested.isDerived` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.isDerived` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `SpecimenDefinition.typeTested.isDerived` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension. Element `SpecimenDefinition.typeTested.isDerived` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.isDerived` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="1"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> </element> <element id="Extension.extension:isDerived.id"> <path value="Extension.extension.id"/> <representation value="xmlAttr"/> <short value="xml:id (or equivalent in JSON)"/> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:isDerived.extension"> <path value="Extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <rules value="open"/> </slicing> <short value="Additional Content defined by implementations"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:isDerived.url"> <path value="Extension.extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <code value="uri"/> </type> <fixedUri value="isDerived"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:isDerived.value[x]"> <path value="Extension.extension.value[x]"/> <short value="Primary or secondary specimen"/> <definition value="Primary of secondary specimen."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="boolean"/> </type> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:type"> <path value="Extension.extension"/> <sliceName value="type"/> <short value="R5: Type of intended specimen (new)"/> <definition value="R5: `SpecimenDefinition.typeTested.type` (new:CodeableConcept)"/> <comment value="Element `SpecimenDefinition.typeTested.type` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension. Element `SpecimenDefinition.typeTested.type` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.type` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `SpecimenDefinition.typeTested.type` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension. Element `SpecimenDefinition.typeTested.type` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.type` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="1"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> </element> <element id="Extension.extension:type.id"> <path value="Extension.extension.id"/> <representation value="xmlAttr"/> <short value="xml:id (or equivalent in JSON)"/> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:type.extension"> <path value="Extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <rules value="open"/> </slicing> <short value="Additional Content defined by implementations"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:type.url"> <path value="Extension.extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <code value="uri"/> </type> <fixedUri value="type"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:type.value[x]"> <path value="Extension.extension.value[x]"/> <short value="Type of intended specimen"/> <definition value="The kind of specimen conditioned for testing expected by lab."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> <binding> <strength value="example"/> <description value="The type of specimen conditioned in a container for lab testing."/> <valueSetUri value="http://hl7.org/fhir/ValueSet/v2-0487|2.8.2"/> </binding> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:preference"> <path value="Extension.extension"/> <sliceName value="preference"/> <short value="R5: preferred | alternate (new)"/> <definition value="R5: `SpecimenDefinition.typeTested.preference` (new:code)"/> <comment value="Element `SpecimenDefinition.typeTested.preference` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension. Element `SpecimenDefinition.typeTested.preference` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.preference` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `SpecimenDefinition.typeTested.preference` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension. Element `SpecimenDefinition.typeTested.preference` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.preference` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="1"/> <max value="1"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> </element> <element id="Extension.extension:preference.id"> <path value="Extension.extension.id"/> <representation value="xmlAttr"/> <short value="xml:id (or equivalent in JSON)"/> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:preference.extension"> <path value="Extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <rules value="open"/> </slicing> <short value="Additional Content defined by implementations"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:preference.url"> <path value="Extension.extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <code value="uri"/> </type> <fixedUri value="preference"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:preference.value[x]"> <path value="Extension.extension.value[x]"/> <short value="preferred | alternate"/> <definition value="The preference for this type of conditioned specimen."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="code"/> </type> <binding> <strength value="required"/> <description value="Degree of preference of a type of conditioned specimen."/> <valueSetUri value="http://hl7.org/fhir/uv/xver/ValueSet/R5-specimen-contained-preference-for-R3|0.1.0"/> </binding> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:container"> <path value="Extension.extension"/> <sliceName value="container"/> <short value="R5: The specimen's container (new)"/> <definition value="R5: `SpecimenDefinition.typeTested.container` (new:BackboneElement)"/> <comment value="Element `SpecimenDefinition.typeTested.container` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension. Element `SpecimenDefinition.typeTested.container` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.container` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `SpecimenDefinition.typeTested.container` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension. Element `SpecimenDefinition.typeTested.container` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.container` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="1"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> </element> <element id="Extension.extension:container.id"> <path value="Extension.extension.id"/> <representation value="xmlAttr"/> <short value="xml:id (or equivalent in JSON)"/> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:container.extension"> <path value="Extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <ordered value="false"/> <rules value="open"/> </slicing> <short value="Extension"/> <definition value="An Extension"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> </element> <element id="Extension.extension:container.extension:material"> <path value="Extension.extension.extension"/> <sliceName value="material"/> <short value="R5: The material type used for the container (new)"/> <definition value="R5: `SpecimenDefinition.typeTested.container.material` (new:CodeableConcept)"/> <comment value="Element `SpecimenDefinition.typeTested.container.material` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension. Element `SpecimenDefinition.typeTested.container.material` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.container.material` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Examples: glass, plastic, metal."/> <requirements value="Element `SpecimenDefinition.typeTested.container.material` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension. Element `SpecimenDefinition.typeTested.container.material` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.container.material` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="1"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> </element> <element id="Extension.extension:container.extension:material.id"> <path value="Extension.extension.extension.id"/> <representation value="xmlAttr"/> <short value="xml:id (or equivalent in JSON)"/> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:container.extension:material.extension"> <path value="Extension.extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <rules value="open"/> </slicing> <short value="Additional Content defined by implementations"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:container.extension:material.url"> <path value="Extension.extension.extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <code value="uri"/> </type> <fixedUri value="material"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:container.extension:material.value[x]"> <path value="Extension.extension.extension.value[x]"/> <short value="The material type used for the container"/> <definition value="The type of material of the container."/> <comment value="Examples: glass, plastic, metal."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:container.extension:type"> <path value="Extension.extension.extension"/> <sliceName value="type"/> <short value="R5: Kind of container associated with the kind of specimen (new)"/> <definition value="R5: `SpecimenDefinition.typeTested.container.type` (new:CodeableConcept)"/> <comment value="Element `SpecimenDefinition.typeTested.container.type` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension. Element `SpecimenDefinition.typeTested.container.type` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.container.type` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `SpecimenDefinition.typeTested.container.type` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension. Element `SpecimenDefinition.typeTested.container.type` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.container.type` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="1"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> </element> <element id="Extension.extension:container.extension:type.id"> <path value="Extension.extension.extension.id"/> <representation value="xmlAttr"/> <short value="xml:id (or equivalent in JSON)"/> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:container.extension:type.extension"> <path value="Extension.extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <rules value="open"/> </slicing> <short value="Additional Content defined by implementations"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:container.extension:type.url"> <path value="Extension.extension.extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <code value="uri"/> </type> <fixedUri value="type"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:container.extension:type.value[x]"> <path value="Extension.extension.extension.value[x]"/> <short value="Kind of container associated with the kind of specimen"/> <definition value="The type of container used to contain this kind of specimen."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:container.extension:cap"> <path value="Extension.extension.extension"/> <sliceName value="cap"/> <short value="R5: Color of container cap (new)"/> <definition value="R5: `SpecimenDefinition.typeTested.container.cap` (new:CodeableConcept)"/> <comment value="Element `SpecimenDefinition.typeTested.container.cap` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension. Element `SpecimenDefinition.typeTested.container.cap` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.container.cap` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="From ISO 6710-2017 Table F.1 Recommended colour codes. Element `SpecimenDefinition.typeTested.container.cap` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension. Element `SpecimenDefinition.typeTested.container.cap` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.container.cap` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="1"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> </element> <element id="Extension.extension:container.extension:cap.id"> <path value="Extension.extension.extension.id"/> <representation value="xmlAttr"/> <short value="xml:id (or equivalent in JSON)"/> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:container.extension:cap.extension"> <path value="Extension.extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <rules value="open"/> </slicing> <short value="Additional Content defined by implementations"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:container.extension:cap.url"> <path value="Extension.extension.extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <code value="uri"/> </type> <fixedUri value="cap"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:container.extension:cap.value[x]"> <path value="Extension.extension.extension.value[x]"/> <short value="Color of container cap"/> <definition value="Color of container cap."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> <binding> <strength value="example"/> <description value="Color of the container cap."/> <valueSetUri value="http://hl7.org/fhir/uv/xver/ValueSet/R5-container-cap-for-R3|0.1.0"/> </binding> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:container.extension:description"> <path value="Extension.extension.extension"/> <sliceName value="description"/> <short value="R5: The description of the kind of container (new)"/> <definition value="R5: `SpecimenDefinition.typeTested.container.description` (new:markdown)"/> <comment value="Element `SpecimenDefinition.typeTested.container.description` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension. Element `SpecimenDefinition.typeTested.container.description` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.container.description` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `SpecimenDefinition.typeTested.container.description` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension. Element `SpecimenDefinition.typeTested.container.description` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.container.description` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="1"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> </element> <element id="Extension.extension:container.extension:description.id"> <path value="Extension.extension.extension.id"/> <representation value="xmlAttr"/> <short value="xml:id (or equivalent in JSON)"/> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:container.extension:description.extension"> <path value="Extension.extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <rules value="open"/> </slicing> <short value="Additional Content defined by implementations"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:container.extension:description.url"> <path value="Extension.extension.extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <code value="uri"/> </type> <fixedUri value="description"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:container.extension:description.value[x]"> <path value="Extension.extension.extension.value[x]"/> <short value="The description of the kind of container"/> <definition value="The textual description of the kind of container."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="markdown"/> </type> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:container.extension:capacity"> <path value="Extension.extension.extension"/> <sliceName value="capacity"/> <short value="R5: The capacity of this kind of container (new)"/> <definition value="R5: `SpecimenDefinition.typeTested.container.capacity` (new:Quantity[SimpleQuantity])"/> <comment value="Element `SpecimenDefinition.typeTested.container.capacity` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension. Element `SpecimenDefinition.typeTested.container.capacity` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.container.capacity` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `SpecimenDefinition.typeTested.container.capacity` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension. Element `SpecimenDefinition.typeTested.container.capacity` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.container.capacity` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="1"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> </element> <element id="Extension.extension:container.extension:capacity.id"> <path value="Extension.extension.extension.id"/> <representation value="xmlAttr"/> <short value="xml:id (or equivalent in JSON)"/> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:container.extension:capacity.extension"> <path value="Extension.extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <rules value="open"/> </slicing> <short value="Additional Content defined by implementations"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:container.extension:capacity.url"> <path value="Extension.extension.extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <code value="uri"/> </type> <fixedUri value="capacity"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:container.extension:capacity.value[x]"> <path value="Extension.extension.extension.value[x]"/> <short value="The capacity of this kind of container"/> <definition value="The capacity (volume or other measure) of this kind of container."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="Quantity"/> <profile value="http://hl7.org/fhir/StructureDefinition/SimpleQuantity"/> </type> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:container.extension:minimumVolume"> <path value="Extension.extension.extension"/> <sliceName value="minimumVolume"/> <short value="R5: Minimum volume (new)"/> <definition value="R5: `SpecimenDefinition.typeTested.container.minimumVolume[x]` (new:Quantity[SimpleQuantity], string)"/> <comment value="Element `SpecimenDefinition.typeTested.container.minimumVolume[x]` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension. Element `SpecimenDefinition.typeTested.container.minimumVolume[x]` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.container.minimumVolume[x]` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `SpecimenDefinition.typeTested.container.minimumVolume[x]` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension. Element `SpecimenDefinition.typeTested.container.minimumVolume[x]` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.container.minimumVolume[x]` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="1"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> </element> <element id="Extension.extension:container.extension:minimumVolume.id"> <path value="Extension.extension.extension.id"/> <representation value="xmlAttr"/> <short value="xml:id (or equivalent in JSON)"/> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:container.extension:minimumVolume.extension"> <path value="Extension.extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <rules value="open"/> </slicing> <short value="Additional Content defined by implementations"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:container.extension:minimumVolume.url"> <path value="Extension.extension.extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <code value="uri"/> </type> <fixedUri value="minimumVolume"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:container.extension:minimumVolume.value[x]"> <path value="Extension.extension.extension.value[x]"/> <short value="Minimum volume"/> <definition value="The minimum volume to be conditioned in the container."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="Quantity"/> <profile value="http://hl7.org/fhir/StructureDefinition/SimpleQuantity"/> </type> <type> <code value="string"/> </type> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:container.extension:additive"> <path value="Extension.extension.extension"/> <sliceName value="additive"/> <short value="R5: Additive associated with container (new)"/> <definition value="R5: `SpecimenDefinition.typeTested.container.additive` (new:BackboneElement)"/> <comment value="Element `SpecimenDefinition.typeTested.container.additive` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension. Element `SpecimenDefinition.typeTested.container.additive` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.container.additive` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `SpecimenDefinition.typeTested.container.additive` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension. Element `SpecimenDefinition.typeTested.container.additive` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.container.additive` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> </element> <element id="Extension.extension:container.extension:additive.id"> <path value="Extension.extension.extension.id"/> <representation value="xmlAttr"/> <short value="xml:id (or equivalent in JSON)"/> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:container.extension:additive.extension"> <path value="Extension.extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <ordered value="false"/> <rules value="open"/> </slicing> <short value="Extension"/> <definition value="An Extension"/> <min value="1"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> </element> <element id="Extension.extension:container.extension:additive.extension:additive"> <path value="Extension.extension.extension.extension"/> <sliceName value="additive"/> <short value="R5: Additive associated with container (new)"/> <definition value="R5: `SpecimenDefinition.typeTested.container.additive.additive[x]` (new:CodeableConcept, Reference(SubstanceDefinition))"/> <comment value="Element `SpecimenDefinition.typeTested.container.additive.additive[x]` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container.additive` requires a cross-version extension. Element `SpecimenDefinition.typeTested.container.additive.additive[x]` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.container.additive.additive[x]` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `SpecimenDefinition.typeTested.container.additive.additive[x]` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container.additive` requires a cross-version extension. Element `SpecimenDefinition.typeTested.container.additive.additive[x]` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.container.additive.additive[x]` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="1"/> <max value="1"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> </element> <element id="Extension.extension:container.extension:additive.extension:additive.id"> <path value="Extension.extension.extension.extension.id"/> <representation value="xmlAttr"/> <short value="xml:id (or equivalent in JSON)"/> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:container.extension:additive.extension:additive.extension"> <path value="Extension.extension.extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <rules value="open"/> </slicing> <short value="Additional Content defined by implementations"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:container.extension:additive.extension:additive.url"> <path value="Extension.extension.extension.extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <code value="uri"/> </type> <fixedUri value="additive"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:container.extension:additive.extension:additive.value[x]"> <path value="Extension.extension.extension.extension.value[x]"/> <short value="Additive associated with container"/> <definition value="Substance introduced in the kind of container to preserve, maintain or enhance the specimen. Examples: Formalin, Citrate, EDTA."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> <type> <code value="Reference"/> <targetProfile value="http://hl7.org/fhir/5.0/StructureDefinition/profile-SubstanceDefinition|0.1.0"/> </type> <type> <code value="Reference"/> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Basic"/> </type> <binding> <strength value="example"/> <description value="Substance added to specimen container."/> <valueSetUri value="http://hl7.org/fhir/ValueSet/v2-0371|2.8.2"/> </binding> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:container.extension:additive.url"> <path value="Extension.extension.extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <code value="uri"/> </type> <fixedUri value="additive"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:container.extension:additive.value[x]"> <path value="Extension.extension.extension.value[x]"/> <short value="Value of extension"/> <definition value="Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list)."/> <min value="0"/> <max value="0"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="base64Binary"/> </type> <type> <code value="boolean"/> </type> <type> <code value="code"/> </type> <type> <code value="date"/> </type> <type> <code value="dateTime"/> </type> <type> <code value="decimal"/> </type> <type> <code value="id"/> </type> <type> <code value="instant"/> </type> <type> <code value="integer"/> </type> <type> <code value="markdown"/> </type> <type> <code value="oid"/> </type> <type> <code value="positiveInt"/> </type> <type> <code value="string"/> </type> <type> <code value="time"/> </type> <type> <code value="unsignedInt"/> </type> <type> <code value="uri"/> </type> <type> <code value="Address"/> </type> <type> <code value="Age"/> </type> <type> <code value="Annotation"/> </type> <type> <code value="Attachment"/> </type> <type> <code value="CodeableConcept"/> </type> <type> <code value="Coding"/> </type> <type> <code value="ContactPoint"/> </type> <type> <code value="Count"/> </type> <type> <code value="Distance"/> </type> <type> <code value="Duration"/> </type> <type> <code value="HumanName"/> </type> <type> <code value="Identifier"/> </type> <type> <code value="Money"/> </type> <type> <code value="Period"/> </type> <type> <code value="Quantity"/> </type> <type> <code value="Range"/> </type> <type> <code value="Ratio"/> </type> <type> <code value="Reference"/> </type> <type> <code value="SampledData"/> </type> <type> <code value="Signature"/> </type> <type> <code value="Timing"/> </type> <type> <code value="Meta"/> </type> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:container.extension:preparation"> <path value="Extension.extension.extension"/> <sliceName value="preparation"/> <short value="R5: Special processing applied to the container for this specimen type (new)"/> <definition value="R5: `SpecimenDefinition.typeTested.container.preparation` (new:markdown)"/> <comment value="Element `SpecimenDefinition.typeTested.container.preparation` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension. Element `SpecimenDefinition.typeTested.container.preparation` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.container.preparation` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `SpecimenDefinition.typeTested.container.preparation` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension. Element `SpecimenDefinition.typeTested.container.preparation` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.container.preparation` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="1"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> </element> <element id="Extension.extension:container.extension:preparation.id"> <path value="Extension.extension.extension.id"/> <representation value="xmlAttr"/> <short value="xml:id (or equivalent in JSON)"/> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:container.extension:preparation.extension"> <path value="Extension.extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <rules value="open"/> </slicing> <short value="Additional Content defined by implementations"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:container.extension:preparation.url"> <path value="Extension.extension.extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <code value="uri"/> </type> <fixedUri value="preparation"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:container.extension:preparation.value[x]"> <path value="Extension.extension.extension.value[x]"/> <short value="Special processing applied to the container for this specimen type"/> <definition value="Special processing that should be applied to the container for this kind of specimen."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="markdown"/> </type> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:container.url"> <path value="Extension.extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <code value="uri"/> </type> <fixedUri value="container"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:container.value[x]"> <path value="Extension.extension.value[x]"/> <short value="Value of extension"/> <definition value="Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list)."/> <min value="0"/> <max value="0"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="base64Binary"/> </type> <type> <code value="boolean"/> </type> <type> <code value="code"/> </type> <type> <code value="date"/> </type> <type> <code value="dateTime"/> </type> <type> <code value="decimal"/> </type> <type> <code value="id"/> </type> <type> <code value="instant"/> </type> <type> <code value="integer"/> </type> <type> <code value="markdown"/> </type> <type> <code value="oid"/> </type> <type> <code value="positiveInt"/> </type> <type> <code value="string"/> </type> <type> <code value="time"/> </type> <type> <code value="unsignedInt"/> </type> <type> <code value="uri"/> </type> <type> <code value="Address"/> </type> <type> <code value="Age"/> </type> <type> <code value="Annotation"/> </type> <type> <code value="Attachment"/> </type> <type> <code value="CodeableConcept"/> </type> <type> <code value="Coding"/> </type> <type> <code value="ContactPoint"/> </type> <type> <code value="Count"/> </type> <type> <code value="Distance"/> </type> <type> <code value="Duration"/> </type> <type> <code value="HumanName"/> </type> <type> <code value="Identifier"/> </type> <type> <code value="Money"/> </type> <type> <code value="Period"/> </type> <type> <code value="Quantity"/> </type> <type> <code value="Range"/> </type> <type> <code value="Ratio"/> </type> <type> <code value="Reference"/> </type> <type> <code value="SampledData"/> </type> <type> <code value="Signature"/> </type> <type> <code value="Timing"/> </type> <type> <code value="Meta"/> </type> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:requirement"> <path value="Extension.extension"/> <sliceName value="requirement"/> <short value="R5: Requirements for specimen delivery and special handling (new)"/> <definition value="R5: `SpecimenDefinition.typeTested.requirement` (new:markdown)"/> <comment value="Element `SpecimenDefinition.typeTested.requirement` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension. Element `SpecimenDefinition.typeTested.requirement` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.requirement` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `SpecimenDefinition.typeTested.requirement` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension. Element `SpecimenDefinition.typeTested.requirement` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.requirement` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="1"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> </element> <element id="Extension.extension:requirement.id"> <path value="Extension.extension.id"/> <representation value="xmlAttr"/> <short value="xml:id (or equivalent in JSON)"/> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:requirement.extension"> <path value="Extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <rules value="open"/> </slicing> <short value="Additional Content defined by implementations"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:requirement.url"> <path value="Extension.extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <code value="uri"/> </type> <fixedUri value="requirement"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:requirement.value[x]"> <path value="Extension.extension.value[x]"/> <short value="Requirements for specimen delivery and special handling"/> <definition value="Requirements for delivery and special handling of this kind of conditioned specimen."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="markdown"/> </type> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:retentionTime"> <path value="Extension.extension"/> <sliceName value="retentionTime"/> <short value="R5: The usual time for retaining this kind of specimen (new)"/> <definition value="R5: `SpecimenDefinition.typeTested.retentionTime` (new:Duration)"/> <comment value="Element `SpecimenDefinition.typeTested.retentionTime` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension. Element `SpecimenDefinition.typeTested.retentionTime` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.retentionTime` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `SpecimenDefinition.typeTested.retentionTime` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension. Element `SpecimenDefinition.typeTested.retentionTime` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.retentionTime` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="1"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> </element> <element id="Extension.extension:retentionTime.id"> <path value="Extension.extension.id"/> <representation value="xmlAttr"/> <short value="xml:id (or equivalent in JSON)"/> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:retentionTime.extension"> <path value="Extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <rules value="open"/> </slicing> <short value="Additional Content defined by implementations"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:retentionTime.url"> <path value="Extension.extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <code value="uri"/> </type> <fixedUri value="retentionTime"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:retentionTime.value[x]"> <path value="Extension.extension.value[x]"/> <short value="The usual time for retaining this kind of specimen"/> <definition value="The usual time that a specimen of this kind is retained after the ordered tests are completed, for the purpose of additional testing."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="Duration"/> </type> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:singleUse"> <path value="Extension.extension"/> <sliceName value="singleUse"/> <short value="R5: Specimen for single use only (new)"/> <definition value="R5: `SpecimenDefinition.typeTested.singleUse` (new:boolean)"/> <comment value="Element `SpecimenDefinition.typeTested.singleUse` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension. Element `SpecimenDefinition.typeTested.singleUse` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.singleUse` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `SpecimenDefinition.typeTested.singleUse` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension. Element `SpecimenDefinition.typeTested.singleUse` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.singleUse` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="1"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> </element> <element id="Extension.extension:singleUse.id"> <path value="Extension.extension.id"/> <representation value="xmlAttr"/> <short value="xml:id (or equivalent in JSON)"/> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:singleUse.extension"> <path value="Extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <rules value="open"/> </slicing> <short value="Additional Content defined by implementations"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:singleUse.url"> <path value="Extension.extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <code value="uri"/> </type> <fixedUri value="singleUse"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:singleUse.value[x]"> <path value="Extension.extension.value[x]"/> <short value="Specimen for single use only"/> <definition value="Specimen can be used by only one test or panel if the value is "true"."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="boolean"/> </type> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:rejectionCriterion"> <path value="Extension.extension"/> <sliceName value="rejectionCriterion"/> <short value="R5: Criterion specified for specimen rejection (new)"/> <definition value="R5: `SpecimenDefinition.typeTested.rejectionCriterion` (new:CodeableConcept)"/> <comment value="Element `SpecimenDefinition.typeTested.rejectionCriterion` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension. Element `SpecimenDefinition.typeTested.rejectionCriterion` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.rejectionCriterion` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `SpecimenDefinition.typeTested.rejectionCriterion` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension. Element `SpecimenDefinition.typeTested.rejectionCriterion` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.rejectionCriterion` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> </element> <element id="Extension.extension:rejectionCriterion.id"> <path value="Extension.extension.id"/> <representation value="xmlAttr"/> <short value="xml:id (or equivalent in JSON)"/> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:rejectionCriterion.extension"> <path value="Extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <rules value="open"/> </slicing> <short value="Additional Content defined by implementations"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:rejectionCriterion.url"> <path value="Extension.extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <code value="uri"/> </type> <fixedUri value="rejectionCriterion"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:rejectionCriterion.value[x]"> <path value="Extension.extension.value[x]"/> <short value="Criterion specified for specimen rejection"/> <definition value="Criterion for rejection of the specimen in its container by the laboratory."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> <binding> <strength value="example"/> <description value="Criterion for rejection of the specimen by laboratory."/> <valueSetUri value="http://hl7.org/fhir/uv/xver/ValueSet/R5-rejection-criteria-for-R3|0.1.0"/> </binding> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:handling"> <path value="Extension.extension"/> <sliceName value="handling"/> <short value="R5: Specimen handling before testing (new)"/> <definition value="R5: `SpecimenDefinition.typeTested.handling` (new:BackboneElement)"/> <comment value="Element `SpecimenDefinition.typeTested.handling` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension. Element `SpecimenDefinition.typeTested.handling` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.handling` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `SpecimenDefinition.typeTested.handling` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension. Element `SpecimenDefinition.typeTested.handling` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.handling` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> </element> <element id="Extension.extension:handling.id"> <path value="Extension.extension.id"/> <representation value="xmlAttr"/> <short value="xml:id (or equivalent in JSON)"/> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:handling.extension"> <path value="Extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <ordered value="false"/> <rules value="open"/> </slicing> <short value="Extension"/> <definition value="An Extension"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> </element> <element id="Extension.extension:handling.extension:temperatureQualifier"> <path value="Extension.extension.extension"/> <sliceName value="temperatureQualifier"/> <short value="R5: Qualifies the interval of temperature (new)"/> <definition value="R5: `SpecimenDefinition.typeTested.handling.temperatureQualifier` (new:CodeableConcept)"/> <comment value="Element `SpecimenDefinition.typeTested.handling.temperatureQualifier` is part of an existing definition because parent element `SpecimenDefinition.typeTested.handling` requires a cross-version extension. Element `SpecimenDefinition.typeTested.handling.temperatureQualifier` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.handling.temperatureQualifier` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `SpecimenDefinition.typeTested.handling.temperatureQualifier` is part of an existing definition because parent element `SpecimenDefinition.typeTested.handling` requires a cross-version extension. Element `SpecimenDefinition.typeTested.handling.temperatureQualifier` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.handling.temperatureQualifier` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="1"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> </element> <element id="Extension.extension:handling.extension:temperatureQualifier.id"> <path value="Extension.extension.extension.id"/> <representation value="xmlAttr"/> <short value="xml:id (or equivalent in JSON)"/> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:handling.extension:temperatureQualifier.extension"> <path value="Extension.extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <rules value="open"/> </slicing> <short value="Additional Content defined by implementations"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:handling.extension:temperatureQualifier.url"> <path value="Extension.extension.extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <code value="uri"/> </type> <fixedUri value="temperatureQualifier"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:handling.extension:temperatureQualifier.value[x]"> <path value="Extension.extension.extension.value[x]"/> <short value="Qualifies the interval of temperature"/> <definition value="It qualifies the interval of temperature, which characterizes an occurrence of handling. Conditions that are not related to temperature may be handled in the instruction element."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> <binding> <strength value="example"/> <description value="Set of handling instructions prior testing of the specimen."/> <valueSetUri value="http://hl7.org/fhir/uv/xver/ValueSet/R5-handling-condition-for-R3|0.1.0"/> </binding> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:handling.extension:temperatureRange"> <path value="Extension.extension.extension"/> <sliceName value="temperatureRange"/> <short value="R5: Temperature range for these handling instructions (new)"/> <definition value="R5: `SpecimenDefinition.typeTested.handling.temperatureRange` (new:Range)"/> <comment value="Element `SpecimenDefinition.typeTested.handling.temperatureRange` is part of an existing definition because parent element `SpecimenDefinition.typeTested.handling` requires a cross-version extension. Element `SpecimenDefinition.typeTested.handling.temperatureRange` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.handling.temperatureRange` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `SpecimenDefinition.typeTested.handling.temperatureRange` is part of an existing definition because parent element `SpecimenDefinition.typeTested.handling` requires a cross-version extension. Element `SpecimenDefinition.typeTested.handling.temperatureRange` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.handling.temperatureRange` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="1"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> </element> <element id="Extension.extension:handling.extension:temperatureRange.id"> <path value="Extension.extension.extension.id"/> <representation value="xmlAttr"/> <short value="xml:id (or equivalent in JSON)"/> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:handling.extension:temperatureRange.extension"> <path value="Extension.extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <rules value="open"/> </slicing> <short value="Additional Content defined by implementations"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:handling.extension:temperatureRange.url"> <path value="Extension.extension.extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <code value="uri"/> </type> <fixedUri value="temperatureRange"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:handling.extension:temperatureRange.value[x]"> <path value="Extension.extension.extension.value[x]"/> <short value="Temperature range for these handling instructions"/> <definition value="The temperature interval for this set of handling instructions."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="Range"/> </type> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:handling.extension:maxDuration"> <path value="Extension.extension.extension"/> <sliceName value="maxDuration"/> <short value="R5: Maximum preservation time (new)"/> <definition value="R5: `SpecimenDefinition.typeTested.handling.maxDuration` (new:Duration)"/> <comment value="Element `SpecimenDefinition.typeTested.handling.maxDuration` is part of an existing definition because parent element `SpecimenDefinition.typeTested.handling` requires a cross-version extension. Element `SpecimenDefinition.typeTested.handling.maxDuration` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.handling.maxDuration` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `SpecimenDefinition.typeTested.handling.maxDuration` is part of an existing definition because parent element `SpecimenDefinition.typeTested.handling` requires a cross-version extension. Element `SpecimenDefinition.typeTested.handling.maxDuration` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.handling.maxDuration` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="1"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> </element> <element id="Extension.extension:handling.extension:maxDuration.id"> <path value="Extension.extension.extension.id"/> <representation value="xmlAttr"/> <short value="xml:id (or equivalent in JSON)"/> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:handling.extension:maxDuration.extension"> <path value="Extension.extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <rules value="open"/> </slicing> <short value="Additional Content defined by implementations"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:handling.extension:maxDuration.url"> <path value="Extension.extension.extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <code value="uri"/> </type> <fixedUri value="maxDuration"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:handling.extension:maxDuration.value[x]"> <path value="Extension.extension.extension.value[x]"/> <short value="Maximum preservation time"/> <definition value="The maximum time interval of preservation of the specimen with these conditions."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="Duration"/> </type> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:handling.extension:instruction"> <path value="Extension.extension.extension"/> <sliceName value="instruction"/> <short value="R5: Preservation instruction (new)"/> <definition value="R5: `SpecimenDefinition.typeTested.handling.instruction` (new:markdown)"/> <comment value="Element `SpecimenDefinition.typeTested.handling.instruction` is part of an existing definition because parent element `SpecimenDefinition.typeTested.handling` requires a cross-version extension. Element `SpecimenDefinition.typeTested.handling.instruction` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.handling.instruction` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `SpecimenDefinition.typeTested.handling.instruction` is part of an existing definition because parent element `SpecimenDefinition.typeTested.handling` requires a cross-version extension. Element `SpecimenDefinition.typeTested.handling.instruction` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.handling.instruction` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="1"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> </element> <element id="Extension.extension:handling.extension:instruction.id"> <path value="Extension.extension.extension.id"/> <representation value="xmlAttr"/> <short value="xml:id (or equivalent in JSON)"/> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:handling.extension:instruction.extension"> <path value="Extension.extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <rules value="open"/> </slicing> <short value="Additional Content defined by implementations"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:handling.extension:instruction.url"> <path value="Extension.extension.extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <code value="uri"/> </type> <fixedUri value="instruction"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:handling.extension:instruction.value[x]"> <path value="Extension.extension.extension.value[x]"/> <short value="Preservation instruction"/> <definition value="Additional textual instructions for the preservation or transport of the specimen. For instance, 'Protect from light exposure'."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="markdown"/> </type> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:handling.url"> <path value="Extension.extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <code value="uri"/> </type> <fixedUri value="handling"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:handling.value[x]"> <path value="Extension.extension.value[x]"/> <short value="Value of extension"/> <definition value="Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list)."/> <min value="0"/> <max value="0"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="base64Binary"/> </type> <type> <code value="boolean"/> </type> <type> <code value="code"/> </type> <type> <code value="date"/> </type> <type> <code value="dateTime"/> </type> <type> <code value="decimal"/> </type> <type> <code value="id"/> </type> <type> <code value="instant"/> </type> <type> <code value="integer"/> </type> <type> <code value="markdown"/> </type> <type> <code value="oid"/> </type> <type> <code value="positiveInt"/> </type> <type> <code value="string"/> </type> <type> <code value="time"/> </type> <type> <code value="unsignedInt"/> </type> <type> <code value="uri"/> </type> <type> <code value="Address"/> </type> <type> <code value="Age"/> </type> <type> <code value="Annotation"/> </type> <type> <code value="Attachment"/> </type> <type> <code value="CodeableConcept"/> </type> <type> <code value="Coding"/> </type> <type> <code value="ContactPoint"/> </type> <type> <code value="Count"/> </type> <type> <code value="Distance"/> </type> <type> <code value="Duration"/> </type> <type> <code value="HumanName"/> </type> <type> <code value="Identifier"/> </type> <type> <code value="Money"/> </type> <type> <code value="Period"/> </type> <type> <code value="Quantity"/> </type> <type> <code value="Range"/> </type> <type> <code value="Ratio"/> </type> <type> <code value="Reference"/> </type> <type> <code value="SampledData"/> </type> <type> <code value="Signature"/> </type> <type> <code value="Timing"/> </type> <type> <code value="Meta"/> </type> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:testingDestination"> <path value="Extension.extension"/> <sliceName value="testingDestination"/> <short value="R5: Where the specimen will be tested (new)"/> <definition value="R5: `SpecimenDefinition.typeTested.testingDestination` (new:CodeableConcept)"/> <comment value="Element `SpecimenDefinition.typeTested.testingDestination` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension. Element `SpecimenDefinition.typeTested.testingDestination` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.testingDestination` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `SpecimenDefinition.typeTested.testingDestination` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension. Element `SpecimenDefinition.typeTested.testingDestination` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.testingDestination` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> </element> <element id="Extension.extension:testingDestination.id"> <path value="Extension.extension.id"/> <representation value="xmlAttr"/> <short value="xml:id (or equivalent in JSON)"/> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:testingDestination.extension"> <path value="Extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <rules value="open"/> </slicing> <short value="Additional Content defined by implementations"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:testingDestination.url"> <path value="Extension.extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <code value="uri"/> </type> <fixedUri value="testingDestination"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:testingDestination.value[x]"> <path value="Extension.extension.value[x]"/> <short value="Where the specimen will be tested"/> <definition value="Where the specimen will be tested: e.g., lab, sector, device or any combination of these."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> <binding> <strength value="example"/> <description value="Codes specifying where the specimen will be tested."/> <valueSetUri value="http://hl7.org/fhir/ValueSet/diagnostic-service-sections|3.0.2"/> </binding> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.url"> <path value="Extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <code value="uri"/> </type> <fixedUri value="http://hl7.org/fhir/5.0/StructureDefinition/extension-SpecimenDefinition.typeTested"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.value[x]"> <path value="Extension.value[x]"/> <short value="Value of extension"/> <definition value="Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list)."/> <min value="0"/> <max value="0"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="base64Binary"/> </type> <type> <code value="boolean"/> </type> <type> <code value="code"/> </type> <type> <code value="date"/> </type> <type> <code value="dateTime"/> </type> <type> <code value="decimal"/> </type> <type> <code value="id"/> </type> <type> <code value="instant"/> </type> <type> <code value="integer"/> </type> <type> <code value="markdown"/> </type> <type> <code value="oid"/> </type> <type> <code value="positiveInt"/> </type> <type> <code value="string"/> </type> <type> <code value="time"/> </type> <type> <code value="unsignedInt"/> </type> <type> <code value="uri"/> </type> <type> <code value="Address"/> </type> <type> <code value="Age"/> </type> <type> <code value="Annotation"/> </type> <type> <code value="Attachment"/> </type> <type> <code value="CodeableConcept"/> </type> <type> <code value="Coding"/> </type> <type> <code value="ContactPoint"/> </type> <type> <code value="Count"/> </type> <type> <code value="Distance"/> </type> <type> <code value="Duration"/> </type> <type> <code value="HumanName"/> </type> <type> <code value="Identifier"/> </type> <type> <code value="Money"/> </type> <type> <code value="Period"/> </type> <type> <code value="Quantity"/> </type> <type> <code value="Range"/> </type> <type> <code value="Ratio"/> </type> <type> <code value="Reference"/> </type> <type> <code value="SampledData"/> </type> <type> <code value="Signature"/> </type> <type> <code value="Timing"/> </type> <type> <code value="Meta"/> </type> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> </snapshot> <differential> <element id="Extension"> <path value="Extension"/> <short value="R5: Specimen in container intended for testing by lab (new)"/> <definition value="R5: `SpecimenDefinition.typeTested` (new:BackboneElement)"/> <comment value="Element `SpecimenDefinition.typeTested` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="*"/> <base> <path value="Extension"/> <min value="0"/> <max value="*"/> </base> <isModifier value="false"/> </element> <element id="Extension.extension"> <path value="Extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <ordered value="false"/> <rules value="open"/> </slicing> <min value="1"/> <max value="*"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:isDerived"> <path value="Extension.extension"/> <sliceName value="isDerived"/> <short value="R5: Primary or secondary specimen (new)"/> <definition value="R5: `SpecimenDefinition.typeTested.isDerived` (new:boolean)"/> <comment value="Element `SpecimenDefinition.typeTested.isDerived` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension. Element `SpecimenDefinition.typeTested.isDerived` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.isDerived` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `SpecimenDefinition.typeTested.isDerived` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension. Element `SpecimenDefinition.typeTested.isDerived` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.isDerived` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:isDerived.url"> <path value="Extension.extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="isDerived"/> </element> <element id="Extension.extension:isDerived.value[x]"> <path value="Extension.extension.value[x]"/> <short value="Primary or secondary specimen"/> <definition value="Primary of secondary specimen."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="boolean"/> </type> </element> <element id="Extension.extension:type"> <path value="Extension.extension"/> <sliceName value="type"/> <short value="R5: Type of intended specimen (new)"/> <definition value="R5: `SpecimenDefinition.typeTested.type` (new:CodeableConcept)"/> <comment value="Element `SpecimenDefinition.typeTested.type` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension. Element `SpecimenDefinition.typeTested.type` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.type` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `SpecimenDefinition.typeTested.type` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension. Element `SpecimenDefinition.typeTested.type` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.type` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:type.url"> <path value="Extension.extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="type"/> </element> <element id="Extension.extension:type.value[x]"> <path value="Extension.extension.value[x]"/> <short value="Type of intended specimen"/> <definition value="The kind of specimen conditioned for testing expected by lab."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> <binding> <strength value="example"/> <description value="The type of specimen conditioned in a container for lab testing."/> <valueSetUri value="http://hl7.org/fhir/ValueSet/v2-0487|2.8.2"/> </binding> </element> <element id="Extension.extension:preference"> <path value="Extension.extension"/> <sliceName value="preference"/> <short value="R5: preferred | alternate (new)"/> <definition value="R5: `SpecimenDefinition.typeTested.preference` (new:code)"/> <comment value="Element `SpecimenDefinition.typeTested.preference` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension. Element `SpecimenDefinition.typeTested.preference` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.preference` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `SpecimenDefinition.typeTested.preference` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension. Element `SpecimenDefinition.typeTested.preference` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.preference` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:preference.url"> <path value="Extension.extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="preference"/> </element> <element id="Extension.extension:preference.value[x]"> <path value="Extension.extension.value[x]"/> <short value="preferred | alternate"/> <definition value="The preference for this type of conditioned specimen."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="code"/> </type> <binding> <strength value="required"/> <description value="Degree of preference of a type of conditioned specimen."/> <valueSetUri value="http://hl7.org/fhir/uv/xver/ValueSet/R5-specimen-contained-preference-for-R3|0.1.0"/> </binding> </element> <element id="Extension.extension:container"> <path value="Extension.extension"/> <sliceName value="container"/> <short value="R5: The specimen's container (new)"/> <definition value="R5: `SpecimenDefinition.typeTested.container` (new:BackboneElement)"/> <comment value="Element `SpecimenDefinition.typeTested.container` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension. Element `SpecimenDefinition.typeTested.container` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.container` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `SpecimenDefinition.typeTested.container` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension. Element `SpecimenDefinition.typeTested.container` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.container` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:container.extension"> <path value="Extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <ordered value="false"/> <rules value="open"/> </slicing> <min value="0"/> <max value="*"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:container.extension:material"> <path value="Extension.extension.extension"/> <sliceName value="material"/> <short value="R5: The material type used for the container (new)"/> <definition value="R5: `SpecimenDefinition.typeTested.container.material` (new:CodeableConcept)"/> <comment value="Element `SpecimenDefinition.typeTested.container.material` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension. Element `SpecimenDefinition.typeTested.container.material` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.container.material` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Examples: glass, plastic, metal."/> <requirements value="Element `SpecimenDefinition.typeTested.container.material` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension. Element `SpecimenDefinition.typeTested.container.material` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.container.material` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:container.extension:material.url"> <path value="Extension.extension.extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="material"/> </element> <element id="Extension.extension:container.extension:material.value[x]"> <path value="Extension.extension.extension.value[x]"/> <short value="The material type used for the container"/> <definition value="The type of material of the container."/> <comment value="Examples: glass, plastic, metal."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> </element> <element id="Extension.extension:container.extension:type"> <path value="Extension.extension.extension"/> <sliceName value="type"/> <short value="R5: Kind of container associated with the kind of specimen (new)"/> <definition value="R5: `SpecimenDefinition.typeTested.container.type` (new:CodeableConcept)"/> <comment value="Element `SpecimenDefinition.typeTested.container.type` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension. Element `SpecimenDefinition.typeTested.container.type` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.container.type` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `SpecimenDefinition.typeTested.container.type` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension. Element `SpecimenDefinition.typeTested.container.type` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.container.type` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:container.extension:type.url"> <path value="Extension.extension.extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="type"/> </element> <element id="Extension.extension:container.extension:type.value[x]"> <path value="Extension.extension.extension.value[x]"/> <short value="Kind of container associated with the kind of specimen"/> <definition value="The type of container used to contain this kind of specimen."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> </element> <element id="Extension.extension:container.extension:cap"> <path value="Extension.extension.extension"/> <sliceName value="cap"/> <short value="R5: Color of container cap (new)"/> <definition value="R5: `SpecimenDefinition.typeTested.container.cap` (new:CodeableConcept)"/> <comment value="Element `SpecimenDefinition.typeTested.container.cap` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension. Element `SpecimenDefinition.typeTested.container.cap` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.container.cap` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="From ISO 6710-2017 Table F.1 Recommended colour codes. Element `SpecimenDefinition.typeTested.container.cap` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension. Element `SpecimenDefinition.typeTested.container.cap` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.container.cap` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:container.extension:cap.url"> <path value="Extension.extension.extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="cap"/> </element> <element id="Extension.extension:container.extension:cap.value[x]"> <path value="Extension.extension.extension.value[x]"/> <short value="Color of container cap"/> <definition value="Color of container cap."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> <binding> <strength value="example"/> <description value="Color of the container cap."/> <valueSetUri value="http://hl7.org/fhir/uv/xver/ValueSet/R5-container-cap-for-R3|0.1.0"/> </binding> </element> <element id="Extension.extension:container.extension:description"> <path value="Extension.extension.extension"/> <sliceName value="description"/> <short value="R5: The description of the kind of container (new)"/> <definition value="R5: `SpecimenDefinition.typeTested.container.description` (new:markdown)"/> <comment value="Element `SpecimenDefinition.typeTested.container.description` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension. Element `SpecimenDefinition.typeTested.container.description` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.container.description` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `SpecimenDefinition.typeTested.container.description` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension. Element `SpecimenDefinition.typeTested.container.description` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.container.description` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:container.extension:description.url"> <path value="Extension.extension.extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="description"/> </element> <element id="Extension.extension:container.extension:description.value[x]"> <path value="Extension.extension.extension.value[x]"/> <short value="The description of the kind of container"/> <definition value="The textual description of the kind of container."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="markdown"/> </type> </element> <element id="Extension.extension:container.extension:capacity"> <path value="Extension.extension.extension"/> <sliceName value="capacity"/> <short value="R5: The capacity of this kind of container (new)"/> <definition value="R5: `SpecimenDefinition.typeTested.container.capacity` (new:Quantity[SimpleQuantity])"/> <comment value="Element `SpecimenDefinition.typeTested.container.capacity` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension. Element `SpecimenDefinition.typeTested.container.capacity` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.container.capacity` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `SpecimenDefinition.typeTested.container.capacity` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension. Element `SpecimenDefinition.typeTested.container.capacity` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.container.capacity` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:container.extension:capacity.url"> <path value="Extension.extension.extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="capacity"/> </element> <element id="Extension.extension:container.extension:capacity.value[x]"> <path value="Extension.extension.extension.value[x]"/> <short value="The capacity of this kind of container"/> <definition value="The capacity (volume or other measure) of this kind of container."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="Quantity"/> <profile value="http://hl7.org/fhir/StructureDefinition/SimpleQuantity"/> </type> </element> <element id="Extension.extension:container.extension:minimumVolume"> <path value="Extension.extension.extension"/> <sliceName value="minimumVolume"/> <short value="R5: Minimum volume (new)"/> <definition value="R5: `SpecimenDefinition.typeTested.container.minimumVolume[x]` (new:Quantity[SimpleQuantity], string)"/> <comment value="Element `SpecimenDefinition.typeTested.container.minimumVolume[x]` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension. Element `SpecimenDefinition.typeTested.container.minimumVolume[x]` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.container.minimumVolume[x]` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `SpecimenDefinition.typeTested.container.minimumVolume[x]` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension. Element `SpecimenDefinition.typeTested.container.minimumVolume[x]` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.container.minimumVolume[x]` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:container.extension:minimumVolume.url"> <path value="Extension.extension.extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="minimumVolume"/> </element> <element id="Extension.extension:container.extension:minimumVolume.value[x]"> <path value="Extension.extension.extension.value[x]"/> <short value="Minimum volume"/> <definition value="The minimum volume to be conditioned in the container."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="Quantity"/> <profile value="http://hl7.org/fhir/StructureDefinition/SimpleQuantity"/> </type> <type> <code value="string"/> </type> </element> <element id="Extension.extension:container.extension:additive"> <path value="Extension.extension.extension"/> <sliceName value="additive"/> <short value="R5: Additive associated with container (new)"/> <definition value="R5: `SpecimenDefinition.typeTested.container.additive` (new:BackboneElement)"/> <comment value="Element `SpecimenDefinition.typeTested.container.additive` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension. Element `SpecimenDefinition.typeTested.container.additive` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.container.additive` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `SpecimenDefinition.typeTested.container.additive` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension. Element `SpecimenDefinition.typeTested.container.additive` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.container.additive` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="*"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:container.extension:additive.extension"> <path value="Extension.extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <ordered value="false"/> <rules value="open"/> </slicing> <min value="1"/> <max value="*"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:container.extension:additive.extension:additive"> <path value="Extension.extension.extension.extension"/> <sliceName value="additive"/> <short value="R5: Additive associated with container (new)"/> <definition value="R5: `SpecimenDefinition.typeTested.container.additive.additive[x]` (new:CodeableConcept, Reference(SubstanceDefinition))"/> <comment value="Element `SpecimenDefinition.typeTested.container.additive.additive[x]` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container.additive` requires a cross-version extension. Element `SpecimenDefinition.typeTested.container.additive.additive[x]` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.container.additive.additive[x]` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `SpecimenDefinition.typeTested.container.additive.additive[x]` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container.additive` requires a cross-version extension. Element `SpecimenDefinition.typeTested.container.additive.additive[x]` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.container.additive.additive[x]` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:container.extension:additive.extension:additive.url"> <path value="Extension.extension.extension.extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="additive"/> </element> <element id="Extension.extension:container.extension:additive.extension:additive.value[x]"> <path value="Extension.extension.extension.extension.value[x]"/> <short value="Additive associated with container"/> <definition value="Substance introduced in the kind of container to preserve, maintain or enhance the specimen. Examples: Formalin, Citrate, EDTA."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> <type> <code value="Reference"/> <targetProfile value="http://hl7.org/fhir/5.0/StructureDefinition/profile-SubstanceDefinition|0.1.0"/> </type> <type> <code value="Reference"/> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Basic"/> </type> <binding> <strength value="example"/> <description value="Substance added to specimen container."/> <valueSetUri value="http://hl7.org/fhir/ValueSet/v2-0371|2.8.2"/> </binding> </element> <element id="Extension.extension:container.extension:additive.url"> <path value="Extension.extension.extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="additive"/> </element> <element id="Extension.extension:container.extension:additive.value[x]"> <path value="Extension.extension.extension.value[x]"/> <min value="0"/> <max value="0"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> </element> <element id="Extension.extension:container.extension:preparation"> <path value="Extension.extension.extension"/> <sliceName value="preparation"/> <short value="R5: Special processing applied to the container for this specimen type (new)"/> <definition value="R5: `SpecimenDefinition.typeTested.container.preparation` (new:markdown)"/> <comment value="Element `SpecimenDefinition.typeTested.container.preparation` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension. Element `SpecimenDefinition.typeTested.container.preparation` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.container.preparation` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `SpecimenDefinition.typeTested.container.preparation` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension. Element `SpecimenDefinition.typeTested.container.preparation` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.container.preparation` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:container.extension:preparation.url"> <path value="Extension.extension.extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="preparation"/> </element> <element id="Extension.extension:container.extension:preparation.value[x]"> <path value="Extension.extension.extension.value[x]"/> <short value="Special processing applied to the container for this specimen type"/> <definition value="Special processing that should be applied to the container for this kind of specimen."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="markdown"/> </type> </element> <element id="Extension.extension:container.url"> <path value="Extension.extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="container"/> </element> <element id="Extension.extension:container.value[x]"> <path value="Extension.extension.value[x]"/> <min value="0"/> <max value="0"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> </element> <element id="Extension.extension:requirement"> <path value="Extension.extension"/> <sliceName value="requirement"/> <short value="R5: Requirements for specimen delivery and special handling (new)"/> <definition value="R5: `SpecimenDefinition.typeTested.requirement` (new:markdown)"/> <comment value="Element `SpecimenDefinition.typeTested.requirement` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension. Element `SpecimenDefinition.typeTested.requirement` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.requirement` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `SpecimenDefinition.typeTested.requirement` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension. Element `SpecimenDefinition.typeTested.requirement` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.requirement` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:requirement.url"> <path value="Extension.extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="requirement"/> </element> <element id="Extension.extension:requirement.value[x]"> <path value="Extension.extension.value[x]"/> <short value="Requirements for specimen delivery and special handling"/> <definition value="Requirements for delivery and special handling of this kind of conditioned specimen."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="markdown"/> </type> </element> <element id="Extension.extension:retentionTime"> <path value="Extension.extension"/> <sliceName value="retentionTime"/> <short value="R5: The usual time for retaining this kind of specimen (new)"/> <definition value="R5: `SpecimenDefinition.typeTested.retentionTime` (new:Duration)"/> <comment value="Element `SpecimenDefinition.typeTested.retentionTime` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension. Element `SpecimenDefinition.typeTested.retentionTime` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.retentionTime` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `SpecimenDefinition.typeTested.retentionTime` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension. Element `SpecimenDefinition.typeTested.retentionTime` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.retentionTime` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:retentionTime.url"> <path value="Extension.extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="retentionTime"/> </element> <element id="Extension.extension:retentionTime.value[x]"> <path value="Extension.extension.value[x]"/> <short value="The usual time for retaining this kind of specimen"/> <definition value="The usual time that a specimen of this kind is retained after the ordered tests are completed, for the purpose of additional testing."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="Duration"/> </type> </element> <element id="Extension.extension:singleUse"> <path value="Extension.extension"/> <sliceName value="singleUse"/> <short value="R5: Specimen for single use only (new)"/> <definition value="R5: `SpecimenDefinition.typeTested.singleUse` (new:boolean)"/> <comment value="Element `SpecimenDefinition.typeTested.singleUse` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension. Element `SpecimenDefinition.typeTested.singleUse` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.singleUse` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `SpecimenDefinition.typeTested.singleUse` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension. Element `SpecimenDefinition.typeTested.singleUse` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.singleUse` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:singleUse.url"> <path value="Extension.extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="singleUse"/> </element> <element id="Extension.extension:singleUse.value[x]"> <path value="Extension.extension.value[x]"/> <short value="Specimen for single use only"/> <definition value="Specimen can be used by only one test or panel if the value is "true"."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="boolean"/> </type> </element> <element id="Extension.extension:rejectionCriterion"> <path value="Extension.extension"/> <sliceName value="rejectionCriterion"/> <short value="R5: Criterion specified for specimen rejection (new)"/> <definition value="R5: `SpecimenDefinition.typeTested.rejectionCriterion` (new:CodeableConcept)"/> <comment value="Element `SpecimenDefinition.typeTested.rejectionCriterion` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension. Element `SpecimenDefinition.typeTested.rejectionCriterion` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.rejectionCriterion` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `SpecimenDefinition.typeTested.rejectionCriterion` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension. Element `SpecimenDefinition.typeTested.rejectionCriterion` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.rejectionCriterion` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="*"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:rejectionCriterion.url"> <path value="Extension.extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="rejectionCriterion"/> </element> <element id="Extension.extension:rejectionCriterion.value[x]"> <path value="Extension.extension.value[x]"/> <short value="Criterion specified for specimen rejection"/> <definition value="Criterion for rejection of the specimen in its container by the laboratory."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> <binding> <strength value="example"/> <description value="Criterion for rejection of the specimen by laboratory."/> <valueSetUri value="http://hl7.org/fhir/uv/xver/ValueSet/R5-rejection-criteria-for-R3|0.1.0"/> </binding> </element> <element id="Extension.extension:handling"> <path value="Extension.extension"/> <sliceName value="handling"/> <short value="R5: Specimen handling before testing (new)"/> <definition value="R5: `SpecimenDefinition.typeTested.handling` (new:BackboneElement)"/> <comment value="Element `SpecimenDefinition.typeTested.handling` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension. Element `SpecimenDefinition.typeTested.handling` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.handling` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `SpecimenDefinition.typeTested.handling` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension. Element `SpecimenDefinition.typeTested.handling` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.handling` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="*"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:handling.extension"> <path value="Extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <ordered value="false"/> <rules value="open"/> </slicing> <min value="0"/> <max value="*"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:handling.extension:temperatureQualifier"> <path value="Extension.extension.extension"/> <sliceName value="temperatureQualifier"/> <short value="R5: Qualifies the interval of temperature (new)"/> <definition value="R5: `SpecimenDefinition.typeTested.handling.temperatureQualifier` (new:CodeableConcept)"/> <comment value="Element `SpecimenDefinition.typeTested.handling.temperatureQualifier` is part of an existing definition because parent element `SpecimenDefinition.typeTested.handling` requires a cross-version extension. Element `SpecimenDefinition.typeTested.handling.temperatureQualifier` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.handling.temperatureQualifier` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `SpecimenDefinition.typeTested.handling.temperatureQualifier` is part of an existing definition because parent element `SpecimenDefinition.typeTested.handling` requires a cross-version extension. Element `SpecimenDefinition.typeTested.handling.temperatureQualifier` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.handling.temperatureQualifier` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:handling.extension:temperatureQualifier.url"> <path value="Extension.extension.extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="temperatureQualifier"/> </element> <element id="Extension.extension:handling.extension:temperatureQualifier.value[x]"> <path value="Extension.extension.extension.value[x]"/> <short value="Qualifies the interval of temperature"/> <definition value="It qualifies the interval of temperature, which characterizes an occurrence of handling. Conditions that are not related to temperature may be handled in the instruction element."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> <binding> <strength value="example"/> <description value="Set of handling instructions prior testing of the specimen."/> <valueSetUri value="http://hl7.org/fhir/uv/xver/ValueSet/R5-handling-condition-for-R3|0.1.0"/> </binding> </element> <element id="Extension.extension:handling.extension:temperatureRange"> <path value="Extension.extension.extension"/> <sliceName value="temperatureRange"/> <short value="R5: Temperature range for these handling instructions (new)"/> <definition value="R5: `SpecimenDefinition.typeTested.handling.temperatureRange` (new:Range)"/> <comment value="Element `SpecimenDefinition.typeTested.handling.temperatureRange` is part of an existing definition because parent element `SpecimenDefinition.typeTested.handling` requires a cross-version extension. Element `SpecimenDefinition.typeTested.handling.temperatureRange` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.handling.temperatureRange` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `SpecimenDefinition.typeTested.handling.temperatureRange` is part of an existing definition because parent element `SpecimenDefinition.typeTested.handling` requires a cross-version extension. Element `SpecimenDefinition.typeTested.handling.temperatureRange` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.handling.temperatureRange` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:handling.extension:temperatureRange.url"> <path value="Extension.extension.extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="temperatureRange"/> </element> <element id="Extension.extension:handling.extension:temperatureRange.value[x]"> <path value="Extension.extension.extension.value[x]"/> <short value="Temperature range for these handling instructions"/> <definition value="The temperature interval for this set of handling instructions."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="Range"/> </type> </element> <element id="Extension.extension:handling.extension:maxDuration"> <path value="Extension.extension.extension"/> <sliceName value="maxDuration"/> <short value="R5: Maximum preservation time (new)"/> <definition value="R5: `SpecimenDefinition.typeTested.handling.maxDuration` (new:Duration)"/> <comment value="Element `SpecimenDefinition.typeTested.handling.maxDuration` is part of an existing definition because parent element `SpecimenDefinition.typeTested.handling` requires a cross-version extension. Element `SpecimenDefinition.typeTested.handling.maxDuration` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.handling.maxDuration` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `SpecimenDefinition.typeTested.handling.maxDuration` is part of an existing definition because parent element `SpecimenDefinition.typeTested.handling` requires a cross-version extension. Element `SpecimenDefinition.typeTested.handling.maxDuration` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.handling.maxDuration` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:handling.extension:maxDuration.url"> <path value="Extension.extension.extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="maxDuration"/> </element> <element id="Extension.extension:handling.extension:maxDuration.value[x]"> <path value="Extension.extension.extension.value[x]"/> <short value="Maximum preservation time"/> <definition value="The maximum time interval of preservation of the specimen with these conditions."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="Duration"/> </type> </element> <element id="Extension.extension:handling.extension:instruction"> <path value="Extension.extension.extension"/> <sliceName value="instruction"/> <short value="R5: Preservation instruction (new)"/> <definition value="R5: `SpecimenDefinition.typeTested.handling.instruction` (new:markdown)"/> <comment value="Element `SpecimenDefinition.typeTested.handling.instruction` is part of an existing definition because parent element `SpecimenDefinition.typeTested.handling` requires a cross-version extension. Element `SpecimenDefinition.typeTested.handling.instruction` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.handling.instruction` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `SpecimenDefinition.typeTested.handling.instruction` is part of an existing definition because parent element `SpecimenDefinition.typeTested.handling` requires a cross-version extension. Element `SpecimenDefinition.typeTested.handling.instruction` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.handling.instruction` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:handling.extension:instruction.url"> <path value="Extension.extension.extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="instruction"/> </element> <element id="Extension.extension:handling.extension:instruction.value[x]"> <path value="Extension.extension.extension.value[x]"/> <short value="Preservation instruction"/> <definition value="Additional textual instructions for the preservation or transport of the specimen. For instance, 'Protect from light exposure'."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="markdown"/> </type> </element> <element id="Extension.extension:handling.url"> <path value="Extension.extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="handling"/> </element> <element id="Extension.extension:handling.value[x]"> <path value="Extension.extension.value[x]"/> <min value="0"/> <max value="0"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> </element> <element id="Extension.extension:testingDestination"> <path value="Extension.extension"/> <sliceName value="testingDestination"/> <short value="R5: Where the specimen will be tested (new)"/> <definition value="R5: `SpecimenDefinition.typeTested.testingDestination` (new:CodeableConcept)"/> <comment value="Element `SpecimenDefinition.typeTested.testingDestination` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension. Element `SpecimenDefinition.typeTested.testingDestination` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.testingDestination` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `SpecimenDefinition.typeTested.testingDestination` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension. Element `SpecimenDefinition.typeTested.testingDestination` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested.testingDestination` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="*"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:testingDestination.url"> <path value="Extension.extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="testingDestination"/> </element> <element id="Extension.extension:testingDestination.value[x]"> <path value="Extension.extension.value[x]"/> <short value="Where the specimen will be tested"/> <definition value="Where the specimen will be tested: e.g., lab, sector, device or any combination of these."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> <binding> <strength value="example"/> <description value="Codes specifying where the specimen will be tested."/> <valueSetUri value="http://hl7.org/fhir/ValueSet/diagnostic-service-sections|3.0.2"/> </binding> </element> <element id="Extension.url"> <path value="Extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="http://hl7.org/fhir/5.0/StructureDefinition/extension-SpecimenDefinition.typeTested"/> </element> <element id="Extension.value[x]"> <path value="Extension.value[x]"/> <min value="0"/> <max value="0"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> </element> </differential> </StructureDefinition>

Generated Narrative: StructureDefinition ext-R5-SpecimenDefinition.typeTested

Name	Card.	Type	Description & Constraints
Extension	0..*	Extension	R5: Specimen in container intended for testing by lab (new)
Slices for extension	1..*	Extension	Extension Slice: Unordered, Open by value:url
extension:isDerived	0..1	Extension	R5: Primary or secondary specimen (new)
url	1..1	uri	"isDerived"
value[x]	0..1	boolean	Primary or secondary specimen
extension:type	0..1	Extension	R5: Type of intended specimen (new)
url	1..1	uri	"type"
value[x]	0..1	CodeableConcept	Type of intended specimen Binding: v2 Specimen Type (example): The type of specimen conditioned in a container for lab testing.
extension:preference	1..1	Extension	R5: preferred \| alternate (new)
url	1..1	uri	"preference"
value[x]	1..1	code	preferred \| alternate Binding: R5SpecimenContainedPreferenceForR3 (0.1.0) (required): Degree of preference of a type of conditioned specimen.
extension:container	0..1	Extension	R5: The specimen's container (new)
Slices for extension	0..*	Extension	Extension Slice: Unordered, Open by value:url
extension:material	0..1	Extension	R5: The material type used for the container (new)
url	1..1	uri	"material"
value[x]	0..1	CodeableConcept	The material type used for the container
extension:type	0..1	Extension	R5: Kind of container associated with the kind of specimen (new)
url	1..1	uri	"type"
value[x]	0..1	CodeableConcept	Kind of container associated with the kind of specimen
extension:cap	0..1	Extension	R5: Color of container cap (new)
url	1..1	uri	"cap"
value[x]	0..1	CodeableConcept	Color of container cap Binding: R5ContainerCapForR3 (0.1.0) (example): Color of the container cap.
extension:description	0..1	Extension	R5: The description of the kind of container (new)
url	1..1	uri	"description"
value[x]	0..1	markdown	The description of the kind of container
extension:capacity	0..1	Extension	R5: The capacity of this kind of container (new)
url	1..1	uri	"capacity"
value[x]	0..1	SimpleQuantity	The capacity of this kind of container
extension:minimumVolume	0..1	Extension	R5: Minimum volume (new)
url	1..1	uri	"minimumVolume"
value[x]	0..1		Minimum volume
valueQuantity		Quantity(SimpleQuantity)
valueString		string
extension:additive	0..*	Extension	R5: Additive associated with container (new)
Slices for extension	1..*	Extension	Extension Slice: Unordered, Open by value:url
extension:additive	1..1	Extension	R5: Additive associated with container (new)
url	1..1	uri	"additive"
value[x]	1..1		Additive associated with container Binding: v2 Additive/Preservative (example): Substance added to specimen container.
valueCodeableConcept		CodeableConcept
valueReference		Reference(Cross-version Profile for R5.SubstanceDefinition for use in FHIR STU3(0.1.0) \| Basic)
url	1..1	uri	"additive"
value[x]	0..0		Value of extension
extension:preparation	0..1	Extension	R5: Special processing applied to the container for this specimen type (new)
url	1..1	uri	"preparation"
value[x]	0..1	markdown	Special processing applied to the container for this specimen type
url	1..1	uri	"container"
value[x]	0..0		Value of extension
extension:requirement	0..1	Extension	R5: Requirements for specimen delivery and special handling (new)
url	1..1	uri	"requirement"
value[x]	0..1	markdown	Requirements for specimen delivery and special handling
extension:retentionTime	0..1	Extension	R5: The usual time for retaining this kind of specimen (new)
url	1..1	uri	"retentionTime"
value[x]	0..1	Duration	The usual time for retaining this kind of specimen
extension:singleUse	0..1	Extension	R5: Specimen for single use only (new)
url	1..1	uri	"singleUse"
value[x]	0..1	boolean	Specimen for single use only
extension:rejectionCriterion	0..*	Extension	R5: Criterion specified for specimen rejection (new)
url	1..1	uri	"rejectionCriterion"
value[x]	0..1	CodeableConcept	Criterion specified for specimen rejection Binding: R5RejectionCriteriaForR3 (0.1.0) (example): Criterion for rejection of the specimen by laboratory.
extension:handling	0..*	Extension	R5: Specimen handling before testing (new)
Slices for extension	0..*	Extension	Extension Slice: Unordered, Open by value:url
extension:temperatureQualifier	0..1	Extension	R5: Qualifies the interval of temperature (new)
url	1..1	uri	"temperatureQualifier"
value[x]	0..1	CodeableConcept	Qualifies the interval of temperature Binding: R5HandlingConditionForR3 (0.1.0) (example): Set of handling instructions prior testing of the specimen.
extension:temperatureRange	0..1	Extension	R5: Temperature range for these handling instructions (new)
url	1..1	uri	"temperatureRange"
value[x]	0..1	Range	Temperature range for these handling instructions
extension:maxDuration	0..1	Extension	R5: Maximum preservation time (new)
url	1..1	uri	"maxDuration"
value[x]	0..1	Duration	Maximum preservation time
extension:instruction	0..1	Extension	R5: Preservation instruction (new)
url	1..1	uri	"instruction"
value[x]	0..1	markdown	Preservation instruction
url	1..1	uri	"handling"
value[x]	0..0		Value of extension
extension:testingDestination	0..*	Extension	R5: Where the specimen will be tested (new)
url	1..1	uri	"testingDestination"
value[x]	0..1	CodeableConcept	Where the specimen will be tested Binding: Diagnostic Service Section Codes (example): Codes specifying where the specimen will be tested.
url	1..1	uri	"http://hl7.org/fhir/5.0/StructureDefinition/extension-SpecimenDefinition.typeTested"
value[x]	0..0		Value of extension
Documentation for this format