{ "resourceType" : "StructureDefinition", "id" : "ext-R5-SpecimenDefinition.typeTested", "text" : { "status" : "extensions", "div" : "

Generated Narrative: StructureDefinition ext-R5-SpecimenDefinition.typeTested

\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n
NameFlagsCard.TypeDescription & Constraints\"doco\"
\".\"\".\" Extension 0..*ExtensionR5: Specimen in container intended for testing by lab (new)
\".\"\".\"\".\" Slices for extension 1..*ExtensionExtension
Slice: Unordered, Open by value:url
\".\"\".\"\".\"\".\" extension:isDerived 0..1ExtensionR5: Primary or secondary specimen (new)
\".\"\".\"\".\"\".\"\".\" url 1..1uri"isDerived"
\".\"\".\"\".\"\".\"\".\" value[x] 0..1booleanPrimary or secondary specimen
\".\"\".\"\".\"\".\" extension:type 0..1ExtensionR5: Type of intended specimen (new)
\".\"\".\"\".\"\".\"\".\" url 1..1uri"type"
\".\"\".\"\".\"\".\"\".\" value[x] 0..1CodeableConceptType of intended specimen
Binding: v2 Specimen Type (example): The type of specimen conditioned in a container for lab testing.
\".\"\".\"\".\"\".\" extension:preference 1..1ExtensionR5: preferred | alternate (new)
\".\"\".\"\".\"\".\"\".\" url 1..1uri"preference"
\".\"\".\"\".\"\".\"\".\" value[x] 1..1codepreferred | alternate
Binding: R5SpecimenContainedPreferenceForR3 (0.1.0) (required): Degree of preference of a type of conditioned specimen.
\".\"\".\"\".\"\".\" extension:container 0..1ExtensionR5: The specimen's container (new)
\".\"\".\"\".\"\".\"\".\" Slices for extension 0..*ExtensionExtension
Slice: Unordered, Open by value:url
\".\"\".\"\".\"\".\"\".\"\".\" extension:material 0..1ExtensionR5: The material type used for the container (new)
\".\"\".\"\".\"\".\"\".\"\".\"\".\" url 1..1uri"material"
\".\"\".\"\".\"\".\"\".\"\".\"\".\" value[x] 0..1CodeableConceptThe material type used for the container
\".\"\".\"\".\"\".\"\".\"\".\" extension:type 0..1ExtensionR5: Kind of container associated with the kind of specimen (new)
\".\"\".\"\".\"\".\"\".\"\".\"\".\" url 1..1uri"type"
\".\"\".\"\".\"\".\"\".\"\".\"\".\" value[x] 0..1CodeableConceptKind of container associated with the kind of specimen
\".\"\".\"\".\"\".\"\".\"\".\" extension:cap 0..1ExtensionR5: Color of container cap (new)
\".\"\".\"\".\"\".\"\".\"\".\"\".\" url 1..1uri"cap"
\".\"\".\"\".\"\".\"\".\"\".\"\".\" value[x] 0..1CodeableConceptColor of container cap
Binding: R5ContainerCapForR3 (0.1.0) (example): Color of the container cap.
\".\"\".\"\".\"\".\"\".\"\".\" extension:description 0..1ExtensionR5: The description of the kind of container (new)
\".\"\".\"\".\"\".\"\".\"\".\"\".\" url 1..1uri"description"
\".\"\".\"\".\"\".\"\".\"\".\"\".\" value[x] 0..1markdownThe description of the kind of container
\".\"\".\"\".\"\".\"\".\"\".\" extension:capacity 0..1ExtensionR5: The capacity of this kind of container (new)
\".\"\".\"\".\"\".\"\".\"\".\"\".\" url 1..1uri"capacity"
\".\"\".\"\".\"\".\"\".\"\".\"\".\" value[x] 0..1SimpleQuantityThe capacity of this kind of container
\".\"\".\"\".\"\".\"\".\"\".\" extension:minimumVolume 0..1ExtensionR5: Minimum volume (new)
\".\"\".\"\".\"\".\"\".\"\".\"\".\" url 1..1uri"minimumVolume"
\".\"\".\"\".\"\".\"\".\"\".\"\".\" value[x] 0..1Minimum volume
\".\"\".\"\".\"\".\"\".\"\".\"\".\"\".\" valueQuantityQuantity(SimpleQuantity)
\".\"\".\"\".\"\".\"\".\"\".\"\".\"\".\" valueStringstring
\".\"\".\"\".\"\".\"\".\"\".\" extension:additive 0..*ExtensionR5: Additive associated with container (new)
\".\"\".\"\".\"\".\"\".\"\".\"\".\" Slices for extension 1..*ExtensionExtension
Slice: Unordered, Open by value:url
\".\"\".\"\".\"\".\"\".\"\".\"\".\"\".\" extension:additive 1..1ExtensionR5: Additive associated with container (new)
\".\"\".\"\".\"\".\"\".\"\".\"\".\"\".\"\".\" url 1..1uri"additive"
\".\"\".\"\".\"\".\"\".\"\".\"\".\"\".\"\".\" value[x] 1..1Additive associated with container
Binding: v2 Additive/Preservative (example): Substance added to specimen container.
\".\"\".\"\".\"\".\"\".\"\".\"\".\"\".\"\".\"\".\" valueCodeableConceptCodeableConcept
\".\"\".\"\".\"\".\"\".\"\".\"\".\"\".\"\".\"\".\" valueReferenceReference(Cross-version Profile for R5.SubstanceDefinition for use in FHIR STU3(0.1.0) | Basic)
\".\"\".\"\".\"\".\"\".\"\".\"\".\" url 1..1uri"additive"
\".\"\".\"\".\"\".\"\".\"\".\"\".\" value[x] 0..0Value of extension
\".\"\".\"\".\"\".\"\".\"\".\" extension:preparation 0..1ExtensionR5: Special processing applied to the container for this specimen type (new)
\".\"\".\"\".\"\".\"\".\"\".\"\".\" url 1..1uri"preparation"
\".\"\".\"\".\"\".\"\".\"\".\"\".\" value[x] 0..1markdownSpecial processing applied to the container for this specimen type
\".\"\".\"\".\"\".\"\".\" url 1..1uri"container"
\".\"\".\"\".\"\".\"\".\" value[x] 0..0Value of extension
\".\"\".\"\".\"\".\" extension:requirement 0..1ExtensionR5: Requirements for specimen delivery and special handling (new)
\".\"\".\"\".\"\".\"\".\" url 1..1uri"requirement"
\".\"\".\"\".\"\".\"\".\" value[x] 0..1markdownRequirements for specimen delivery and special handling
\".\"\".\"\".\"\".\" extension:retentionTime 0..1ExtensionR5: The usual time for retaining this kind of specimen (new)
\".\"\".\"\".\"\".\"\".\" url 1..1uri"retentionTime"
\".\"\".\"\".\"\".\"\".\" value[x] 0..1DurationThe usual time for retaining this kind of specimen
\".\"\".\"\".\"\".\" extension:singleUse 0..1ExtensionR5: Specimen for single use only (new)
\".\"\".\"\".\"\".\"\".\" url 1..1uri"singleUse"
\".\"\".\"\".\"\".\"\".\" value[x] 0..1booleanSpecimen for single use only
\".\"\".\"\".\"\".\" extension:rejectionCriterion 0..*ExtensionR5: Criterion specified for specimen rejection (new)
\".\"\".\"\".\"\".\"\".\" url 1..1uri"rejectionCriterion"
\".\"\".\"\".\"\".\"\".\" value[x] 0..1CodeableConceptCriterion specified for specimen rejection
Binding: R5RejectionCriteriaForR3 (0.1.0) (example): Criterion for rejection of the specimen by laboratory.
\".\"\".\"\".\"\".\" extension:handling 0..*ExtensionR5: Specimen handling before testing (new)
\".\"\".\"\".\"\".\"\".\" Slices for extension 0..*ExtensionExtension
Slice: Unordered, Open by value:url
\".\"\".\"\".\"\".\"\".\"\".\" extension:temperatureQualifier 0..1ExtensionR5: Qualifies the interval of temperature (new)
\".\"\".\"\".\"\".\"\".\"\".\"\".\" url 1..1uri"temperatureQualifier"
\".\"\".\"\".\"\".\"\".\"\".\"\".\" value[x] 0..1CodeableConceptQualifies the interval of temperature
Binding: R5HandlingConditionForR3 (0.1.0) (example): Set of handling instructions prior testing of the specimen.
\".\"\".\"\".\"\".\"\".\"\".\" extension:temperatureRange 0..1ExtensionR5: Temperature range for these handling instructions (new)
\".\"\".\"\".\"\".\"\".\"\".\"\".\" url 1..1uri"temperatureRange"
\".\"\".\"\".\"\".\"\".\"\".\"\".\" value[x] 0..1RangeTemperature range for these handling instructions
\".\"\".\"\".\"\".\"\".\"\".\" extension:maxDuration 0..1ExtensionR5: Maximum preservation time (new)
\".\"\".\"\".\"\".\"\".\"\".\"\".\" url 1..1uri"maxDuration"
\".\"\".\"\".\"\".\"\".\"\".\"\".\" value[x] 0..1DurationMaximum preservation time
\".\"\".\"\".\"\".\"\".\"\".\" extension:instruction 0..1ExtensionR5: Preservation instruction (new)
\".\"\".\"\".\"\".\"\".\"\".\"\".\" url 1..1uri"instruction"
\".\"\".\"\".\"\".\"\".\"\".\"\".\" value[x] 0..1markdownPreservation instruction
\".\"\".\"\".\"\".\"\".\" url 1..1uri"handling"
\".\"\".\"\".\"\".\"\".\" value[x] 0..0Value of extension
\".\"\".\"\".\"\".\" extension:testingDestination 0..*ExtensionR5: Where the specimen will be tested (new)
\".\"\".\"\".\"\".\"\".\" url 1..1uri"testingDestination"
\".\"\".\"\".\"\".\"\".\" value[x] 0..1CodeableConceptWhere the specimen will be tested
Binding: Diagnostic Service Section Codes (example): Codes specifying where the specimen will be tested.
\".\"\".\"\".\" url 1..1uri"http://hl7.org/fhir/5.0/StructureDefinition/extension-SpecimenDefinition.typeTested"
\".\"\".\"\".\" value[x] 0..0Value of extension

\"doco\" Documentation for this format
" }, "extension" : [{ "url" : "http://hl7.org/fhir/StructureDefinition/structuredefinition-wg", "valueCode" : "fhir" }, { "extension" : [{ "url" : "packageId", "valueId" : "hl7.fhir.uv.xver-r5.r3" }, { "url" : "version", "valueString" : "0.1.0" }, { "url" : "uri", "valueUri" : "http://hl7.org/fhir/uv/xver/ImplementationGuide/hl7.fhir.uv.xver-r5.r3" }], "url" : "http://hl7.org/fhir/StructureDefinition/package-source" }, { "url" : "http://hl7.org/fhir/StructureDefinition/structuredefinition-fmm", "valueInteger" : 0, "_valueInteger" : { "extension" : [{ "url" : "http://hl7.org/fhir/StructureDefinition/structuredefinition-conformance-derivedFrom", "valueUri" : "http://hl7.org/fhir/uv/xver/ImplementationGuide/hl7.fhir.uv.xver-r5.r3" }] } }, { "url" : "http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status", "valueCode" : "trial-use", "_valueCode" : { "extension" : [{ "url" : "http://hl7.org/fhir/StructureDefinition/structuredefinition-conformance-derivedFrom", "valueUri" : "http://hl7.org/fhir/uv/xver/ImplementationGuide/hl7.fhir.uv.xver-r5.r3" }] } }], "url" : "http://hl7.org/fhir/5.0/StructureDefinition/extension-SpecimenDefinition.typeTested", "version" : "0.1.0", "name" : "ExtensionSpecimenDefinition_TypeTested", "title" : "R5: Specimen in container intended for testing by lab (new)", "status" : "active", "experimental" : false, "date" : "2026-03-17T21:02:03.8104715+00:00", "publisher" : "FHIR Infrastructure", "contact" : [{ "name" : "FHIR Infrastructure", "telecom" : [{ "system" : "url", "value" : "http://www.hl7.org/Special/committees/fiwg" }] }], "description" : "R5: `SpecimenDefinition.typeTested` (new:BackboneElement)", "jurisdiction" : [{ "coding" : [{ "system" : "http://unstats.un.org/unsd/methods/m49/m49.htm", "code" : "001", "display" : "World" }] }], "purpose" : "This extension is part of the cross-version definitions generated to enable use of the\r\nelement `SpecimenDefinition.typeTested` as defined in FHIR R5\r\nin FHIR STU3.\r\n\r\nThe source element is defined as:\r\n`SpecimenDefinition.typeTested` 0..* `BackboneElement`\r\n\r\nAcross FHIR versions, the element set has been mapped as:\r\n* R5: `SpecimenDefinition.typeTested` 0..* `BackboneElement`\r\n\r\nFollowing are the generation technical comments:\r\nElement `SpecimenDefinition.typeTested` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "fhirVersion" : "3.0.2", "mapping" : [{ "identity" : "rim", "uri" : "http://hl7.org/v3", "name" : "RIM Mapping" }], "kind" : "complex-type", "abstract" : false, "contextType" : "resource", "context" : ["Basic"], "type" : "Extension", "baseDefinition" : "http://hl7.org/fhir/StructureDefinition/Extension", "derivation" : "constraint", "snapshot" : { "element" : [{ "id" : "Extension", "path" : "Extension", "short" : "R5: Specimen in container intended for testing by lab (new)", "definition" : "R5: `SpecimenDefinition.typeTested` (new:BackboneElement)", "comment" : "Element `SpecimenDefinition.typeTested` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "min" : 0, "max" : "*", "base" : { "path" : "Extension", "min" : 0, "max" : "*" }, "condition" : ["ele-1"], "constraint" : [{ "key" : "ele-1", "severity" : "error", "human" : "All FHIR elements must have a @value or children", "expression" : "hasValue() | (children().count() > id.count())", "xpath" : "@value|f:*|h:div", "source" : "http://hl7.org/fhir/StructureDefinition/Element" }, { "key" : "ext-1", "severity" : "error", "human" : "Must have either extensions or value[x], not both", "expression" : "extension.exists() != value.exists()", "xpath" : "exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])", "source" : "http://hl7.org/fhir/StructureDefinition/Extension" }], "isModifier" : false }, { "id" : "Extension.id", "path" : "Extension.id", "representation" : ["xmlAttr"], "short" : "xml:id (or equivalent in JSON)", "definition" : "unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.", "min" : 0, "max" : "1", "base" : { "path" : "Element.id", "min" : 0, "max" : "1" }, "type" : [{ "code" : "string" }], "mapping" : [{ "identity" : "rim", "map" : "n/a" }] }, { "id" : "Extension.extension", "path" : "Extension.extension", "slicing" : { "discriminator" : [{ "type" : "value", "path" : "url" }], "description" : "Extensions are always sliced by (at least) url", "ordered" : false, "rules" : "open" }, "short" : "Extension", "definition" : "An Extension", "min" : 1, "max" : "*", "base" : { "path" : "Element.extension", "min" : 0, "max" : "*" }, "type" : [{ "code" : "Extension" }] }, { "id" : "Extension.extension:isDerived", "path" : "Extension.extension", "sliceName" : "isDerived", "short" : "R5: Primary or secondary specimen (new)", "definition" : "R5: `SpecimenDefinition.typeTested.isDerived` (new:boolean)", "comment" : "Element `SpecimenDefinition.typeTested.isDerived` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.isDerived` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.isDerived` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "requirements" : "Element `SpecimenDefinition.typeTested.isDerived` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.isDerived` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.isDerived` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "min" : 0, "max" : "1", "base" : { "path" : "Element.extension", "min" : 0, "max" : "*" }, "type" : [{ "code" : "Extension" }] }, { "id" : "Extension.extension:isDerived.id", "path" : "Extension.extension.id", "representation" : ["xmlAttr"], "short" : "xml:id (or equivalent in JSON)", "definition" : "unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.", "min" : 0, "max" : "1", "base" : { "path" : "Element.id", "min" : 0, "max" : "1" }, "type" : [{ "code" : "string" }], "mapping" : [{ "identity" : "rim", "map" : "n/a" }] }, { "id" : "Extension.extension:isDerived.extension", "path" : "Extension.extension.extension", "slicing" : { "discriminator" : [{ "type" : "value", "path" : "url" }], "description" : "Extensions are always sliced by (at least) url", "rules" : "open" }, "short" : "Additional Content defined by implementations", "definition" : "May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.", "comment" : "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.", "alias" : ["extensions", "user content"], "min" : 0, "max" : "*", "base" : { "path" : "Element.extension", "min" : 0, "max" : "*" }, "type" : [{ "code" : "Extension" }], "mapping" : [{ "identity" : "rim", "map" : "n/a" }] }, { "id" : "Extension.extension:isDerived.url", "path" : "Extension.extension.url", "representation" : ["xmlAttr"], "short" : "identifies the meaning of the extension", "definition" : "Source of the definition for the extension code - a logical name or a URL.", "comment" : "The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.", "min" : 1, "max" : "1", "base" : { "path" : "Extension.url", "min" : 1, "max" : "1" }, "type" : [{ "code" : "uri" }], "fixedUri" : "isDerived", "mapping" : [{ "identity" : "rim", "map" : "N/A" }] }, { "id" : "Extension.extension:isDerived.value[x]", "path" : "Extension.extension.value[x]", "short" : "Primary or secondary specimen", "definition" : "Primary of secondary specimen.", "min" : 0, "max" : "1", "base" : { "path" : "Extension.value[x]", "min" : 0, "max" : "1" }, "type" : [{ "code" : "boolean" }], "mapping" : [{ "identity" : "rim", "map" : "N/A" }] }, { "id" : "Extension.extension:type", "path" : "Extension.extension", "sliceName" : "type", "short" : "R5: Type of intended specimen (new)", "definition" : "R5: `SpecimenDefinition.typeTested.type` (new:CodeableConcept)", "comment" : "Element `SpecimenDefinition.typeTested.type` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.type` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.type` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "requirements" : "Element `SpecimenDefinition.typeTested.type` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.type` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.type` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "min" : 0, "max" : "1", "base" : { "path" : "Element.extension", "min" : 0, "max" : "*" }, "type" : [{ "code" : "Extension" }] }, { "id" : "Extension.extension:type.id", "path" : "Extension.extension.id", "representation" : ["xmlAttr"], "short" : "xml:id (or equivalent in JSON)", "definition" : "unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.", "min" : 0, "max" : "1", "base" : { "path" : "Element.id", "min" : 0, "max" : "1" }, "type" : [{ "code" : "string" }], "mapping" : [{ "identity" : "rim", "map" : "n/a" }] }, { "id" : "Extension.extension:type.extension", "path" : "Extension.extension.extension", "slicing" : { "discriminator" : [{ "type" : "value", "path" : "url" }], "description" : "Extensions are always sliced by (at least) url", "rules" : "open" }, "short" : "Additional Content defined by implementations", "definition" : "May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.", "comment" : "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.", "alias" : ["extensions", "user content"], "min" : 0, "max" : "*", "base" : { "path" : "Element.extension", "min" : 0, "max" : "*" }, "type" : [{ "code" : "Extension" }], "mapping" : [{ "identity" : "rim", "map" : "n/a" }] }, { "id" : "Extension.extension:type.url", "path" : "Extension.extension.url", "representation" : ["xmlAttr"], "short" : "identifies the meaning of the extension", "definition" : "Source of the definition for the extension code - a logical name or a URL.", "comment" : "The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.", "min" : 1, "max" : "1", "base" : { "path" : "Extension.url", "min" : 1, "max" : "1" }, "type" : [{ "code" : "uri" }], "fixedUri" : "type", "mapping" : [{ "identity" : "rim", "map" : "N/A" }] }, { "id" : "Extension.extension:type.value[x]", "path" : "Extension.extension.value[x]", "short" : "Type of intended specimen", "definition" : "The kind of specimen conditioned for testing expected by lab.", "min" : 0, "max" : "1", "base" : { "path" : "Extension.value[x]", "min" : 0, "max" : "1" }, "type" : [{ "code" : "CodeableConcept" }], "binding" : { "strength" : "example", "description" : "The type of specimen conditioned in a container for lab testing.", "valueSetUri" : "http://hl7.org/fhir/ValueSet/v2-0487|2.8.2" }, "mapping" : [{ "identity" : "rim", "map" : "N/A" }] }, { "id" : "Extension.extension:preference", "path" : "Extension.extension", "sliceName" : "preference", "short" : "R5: preferred | alternate (new)", "definition" : "R5: `SpecimenDefinition.typeTested.preference` (new:code)", "comment" : "Element `SpecimenDefinition.typeTested.preference` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.preference` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.preference` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "requirements" : "Element `SpecimenDefinition.typeTested.preference` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.preference` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.preference` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "min" : 1, "max" : "1", "base" : { "path" : "Element.extension", "min" : 0, "max" : "*" }, "type" : [{ "code" : "Extension" }] }, { "id" : "Extension.extension:preference.id", "path" : "Extension.extension.id", "representation" : ["xmlAttr"], "short" : "xml:id (or equivalent in JSON)", "definition" : "unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.", "min" : 0, "max" : "1", "base" : { "path" : "Element.id", "min" : 0, "max" : "1" }, "type" : [{ "code" : "string" }], "mapping" : [{ "identity" : "rim", "map" : "n/a" }] }, { "id" : "Extension.extension:preference.extension", "path" : "Extension.extension.extension", "slicing" : { "discriminator" : [{ "type" : "value", "path" : "url" }], "description" : "Extensions are always sliced by (at least) url", "rules" : "open" }, "short" : "Additional Content defined by implementations", "definition" : "May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.", "comment" : "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.", "alias" : ["extensions", "user content"], "min" : 0, "max" : "*", "base" : { "path" : "Element.extension", "min" : 0, "max" : "*" }, "type" : [{ "code" : "Extension" }], "mapping" : [{ "identity" : "rim", "map" : "n/a" }] }, { "id" : "Extension.extension:preference.url", "path" : "Extension.extension.url", "representation" : ["xmlAttr"], "short" : "identifies the meaning of the extension", "definition" : "Source of the definition for the extension code - a logical name or a URL.", "comment" : "The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.", "min" : 1, "max" : "1", "base" : { "path" : "Extension.url", "min" : 1, "max" : "1" }, "type" : [{ "code" : "uri" }], "fixedUri" : "preference", "mapping" : [{ "identity" : "rim", "map" : "N/A" }] }, { "id" : "Extension.extension:preference.value[x]", "path" : "Extension.extension.value[x]", "short" : "preferred | alternate", "definition" : "The preference for this type of conditioned specimen.", "min" : 1, "max" : "1", "base" : { "path" : "Extension.value[x]", "min" : 0, "max" : "1" }, "type" : [{ "code" : "code" }], "binding" : { "strength" : "required", "description" : "Degree of preference of a type of conditioned specimen.", "valueSetUri" : "http://hl7.org/fhir/uv/xver/ValueSet/R5-specimen-contained-preference-for-R3|0.1.0" }, "mapping" : [{ "identity" : "rim", "map" : "N/A" }] }, { "id" : "Extension.extension:container", "path" : "Extension.extension", "sliceName" : "container", "short" : "R5: The specimen's container (new)", "definition" : "R5: `SpecimenDefinition.typeTested.container` (new:BackboneElement)", "comment" : "Element `SpecimenDefinition.typeTested.container` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.container` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.container` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "requirements" : "Element `SpecimenDefinition.typeTested.container` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.container` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.container` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "min" : 0, "max" : "1", "base" : { "path" : "Element.extension", "min" : 0, "max" : "*" }, "type" : [{ "code" : "Extension" }] }, { "id" : "Extension.extension:container.id", "path" : "Extension.extension.id", "representation" : ["xmlAttr"], "short" : "xml:id (or equivalent in JSON)", "definition" : "unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.", "min" : 0, "max" : "1", "base" : { "path" : "Element.id", "min" : 0, "max" : "1" }, "type" : [{ "code" : "string" }], "mapping" : [{ "identity" : "rim", "map" : "n/a" }] }, { "id" : "Extension.extension:container.extension", "path" : "Extension.extension.extension", "slicing" : { "discriminator" : [{ "type" : "value", "path" : "url" }], "description" : "Extensions are always sliced by (at least) url", "ordered" : false, "rules" : "open" }, "short" : "Extension", "definition" : "An Extension", "min" : 0, "max" : "*", "base" : { "path" : "Element.extension", "min" : 0, "max" : "*" }, "type" : [{ "code" : "Extension" }] }, { "id" : "Extension.extension:container.extension:material", "path" : "Extension.extension.extension", "sliceName" : "material", "short" : "R5: The material type used for the container (new)", "definition" : "R5: `SpecimenDefinition.typeTested.container.material` (new:CodeableConcept)", "comment" : "Element `SpecimenDefinition.typeTested.container.material` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.container.material` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.container.material` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nExamples: glass, plastic, metal.", "requirements" : "Element `SpecimenDefinition.typeTested.container.material` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.container.material` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.container.material` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "min" : 0, "max" : "1", "base" : { "path" : "Element.extension", "min" : 0, "max" : "*" }, "type" : [{ "code" : "Extension" }] }, { "id" : "Extension.extension:container.extension:material.id", "path" : "Extension.extension.extension.id", "representation" : ["xmlAttr"], "short" : "xml:id (or equivalent in JSON)", "definition" : "unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.", "min" : 0, "max" : "1", "base" : { "path" : "Element.id", "min" : 0, "max" : "1" }, "type" : [{ "code" : "string" }], "mapping" : [{ "identity" : "rim", "map" : "n/a" }] }, { "id" : "Extension.extension:container.extension:material.extension", "path" : "Extension.extension.extension.extension", "slicing" : { "discriminator" : [{ "type" : "value", "path" : "url" }], "description" : "Extensions are always sliced by (at least) url", "rules" : "open" }, "short" : "Additional Content defined by implementations", "definition" : "May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.", "comment" : "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.", "alias" : ["extensions", "user content"], "min" : 0, "max" : "*", "base" : { "path" : "Element.extension", "min" : 0, "max" : "*" }, "type" : [{ "code" : "Extension" }], "mapping" : [{ "identity" : "rim", "map" : "n/a" }] }, { "id" : "Extension.extension:container.extension:material.url", "path" : "Extension.extension.extension.url", "representation" : ["xmlAttr"], "short" : "identifies the meaning of the extension", "definition" : "Source of the definition for the extension code - a logical name or a URL.", "comment" : "The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.", "min" : 1, "max" : "1", "base" : { "path" : "Extension.url", "min" : 1, "max" : "1" }, "type" : [{ "code" : "uri" }], "fixedUri" : "material", "mapping" : [{ "identity" : "rim", "map" : "N/A" }] }, { "id" : "Extension.extension:container.extension:material.value[x]", "path" : "Extension.extension.extension.value[x]", "short" : "The material type used for the container", "definition" : "The type of material of the container.", "comment" : "Examples: glass, plastic, metal.", "min" : 0, "max" : "1", "base" : { "path" : "Extension.value[x]", "min" : 0, "max" : "1" }, "type" : [{ "code" : "CodeableConcept" }], "mapping" : [{ "identity" : "rim", "map" : "N/A" }] }, { "id" : "Extension.extension:container.extension:type", "path" : "Extension.extension.extension", "sliceName" : "type", "short" : "R5: Kind of container associated with the kind of specimen (new)", "definition" : "R5: `SpecimenDefinition.typeTested.container.type` (new:CodeableConcept)", "comment" : "Element `SpecimenDefinition.typeTested.container.type` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.container.type` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.container.type` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "requirements" : "Element `SpecimenDefinition.typeTested.container.type` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.container.type` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.container.type` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "min" : 0, "max" : "1", "base" : { "path" : "Element.extension", "min" : 0, "max" : "*" }, "type" : [{ "code" : "Extension" }] }, { "id" : "Extension.extension:container.extension:type.id", "path" : "Extension.extension.extension.id", "representation" : ["xmlAttr"], "short" : "xml:id (or equivalent in JSON)", "definition" : "unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.", "min" : 0, "max" : "1", "base" : { "path" : "Element.id", "min" : 0, "max" : "1" }, "type" : [{ "code" : "string" }], "mapping" : [{ "identity" : "rim", "map" : "n/a" }] }, { "id" : "Extension.extension:container.extension:type.extension", "path" : "Extension.extension.extension.extension", "slicing" : { "discriminator" : [{ "type" : "value", "path" : "url" }], "description" : "Extensions are always sliced by (at least) url", "rules" : "open" }, "short" : "Additional Content defined by implementations", "definition" : "May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.", "comment" : "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.", "alias" : ["extensions", "user content"], "min" : 0, "max" : "*", "base" : { "path" : "Element.extension", "min" : 0, "max" : "*" }, "type" : [{ "code" : "Extension" }], "mapping" : [{ "identity" : "rim", "map" : "n/a" }] }, { "id" : "Extension.extension:container.extension:type.url", "path" : "Extension.extension.extension.url", "representation" : ["xmlAttr"], "short" : "identifies the meaning of the extension", "definition" : "Source of the definition for the extension code - a logical name or a URL.", "comment" : "The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.", "min" : 1, "max" : "1", "base" : { "path" : "Extension.url", "min" : 1, "max" : "1" }, "type" : [{ "code" : "uri" }], "fixedUri" : "type", "mapping" : [{ "identity" : "rim", "map" : "N/A" }] }, { "id" : "Extension.extension:container.extension:type.value[x]", "path" : "Extension.extension.extension.value[x]", "short" : "Kind of container associated with the kind of specimen", "definition" : "The type of container used to contain this kind of specimen.", "min" : 0, "max" : "1", "base" : { "path" : "Extension.value[x]", "min" : 0, "max" : "1" }, "type" : [{ "code" : "CodeableConcept" }], "mapping" : [{ "identity" : "rim", "map" : "N/A" }] }, { "id" : "Extension.extension:container.extension:cap", "path" : "Extension.extension.extension", "sliceName" : "cap", "short" : "R5: Color of container cap (new)", "definition" : "R5: `SpecimenDefinition.typeTested.container.cap` (new:CodeableConcept)", "comment" : "Element `SpecimenDefinition.typeTested.container.cap` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.container.cap` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.container.cap` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "requirements" : "From ISO 6710-2017 Table F.1 Recommended colour codes. Element `SpecimenDefinition.typeTested.container.cap` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.container.cap` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.container.cap` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "min" : 0, "max" : "1", "base" : { "path" : "Element.extension", "min" : 0, "max" : "*" }, "type" : [{ "code" : "Extension" }] }, { "id" : "Extension.extension:container.extension:cap.id", "path" : "Extension.extension.extension.id", "representation" : ["xmlAttr"], "short" : "xml:id (or equivalent in JSON)", "definition" : "unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.", "min" : 0, "max" : "1", "base" : { "path" : "Element.id", "min" : 0, "max" : "1" }, "type" : [{ "code" : "string" }], "mapping" : [{ "identity" : "rim", "map" : "n/a" }] }, { "id" : "Extension.extension:container.extension:cap.extension", "path" : "Extension.extension.extension.extension", "slicing" : { "discriminator" : [{ "type" : "value", "path" : "url" }], "description" : "Extensions are always sliced by (at least) url", "rules" : "open" }, "short" : "Additional Content defined by implementations", "definition" : "May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.", "comment" : "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.", "alias" : ["extensions", "user content"], "min" : 0, "max" : "*", "base" : { "path" : "Element.extension", "min" : 0, "max" : "*" }, "type" : [{ "code" : "Extension" }], "mapping" : [{ "identity" : "rim", "map" : "n/a" }] }, { "id" : "Extension.extension:container.extension:cap.url", "path" : "Extension.extension.extension.url", "representation" : ["xmlAttr"], "short" : "identifies the meaning of the extension", "definition" : "Source of the definition for the extension code - a logical name or a URL.", "comment" : "The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.", "min" : 1, "max" : "1", "base" : { "path" : "Extension.url", "min" : 1, "max" : "1" }, "type" : [{ "code" : "uri" }], "fixedUri" : "cap", "mapping" : [{ "identity" : "rim", "map" : "N/A" }] }, { "id" : "Extension.extension:container.extension:cap.value[x]", "path" : "Extension.extension.extension.value[x]", "short" : "Color of container cap", "definition" : "Color of container cap.", "min" : 0, "max" : "1", "base" : { "path" : "Extension.value[x]", "min" : 0, "max" : "1" }, "type" : [{ "code" : "CodeableConcept" }], "binding" : { "strength" : "example", "description" : "Color of the container cap.", "valueSetUri" : "http://hl7.org/fhir/uv/xver/ValueSet/R5-container-cap-for-R3|0.1.0" }, "mapping" : [{ "identity" : "rim", "map" : "N/A" }] }, { "id" : "Extension.extension:container.extension:description", "path" : "Extension.extension.extension", "sliceName" : "description", "short" : "R5: The description of the kind of container (new)", "definition" : "R5: `SpecimenDefinition.typeTested.container.description` (new:markdown)", "comment" : "Element `SpecimenDefinition.typeTested.container.description` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.container.description` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.container.description` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "requirements" : "Element `SpecimenDefinition.typeTested.container.description` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.container.description` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.container.description` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "min" : 0, "max" : "1", "base" : { "path" : "Element.extension", "min" : 0, "max" : "*" }, "type" : [{ "code" : "Extension" }] }, { "id" : "Extension.extension:container.extension:description.id", "path" : "Extension.extension.extension.id", "representation" : ["xmlAttr"], "short" : "xml:id (or equivalent in JSON)", "definition" : "unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.", "min" : 0, "max" : "1", "base" : { "path" : "Element.id", "min" : 0, "max" : "1" }, "type" : [{ "code" : "string" }], "mapping" : [{ "identity" : "rim", "map" : "n/a" }] }, { "id" : "Extension.extension:container.extension:description.extension", "path" : "Extension.extension.extension.extension", "slicing" : { "discriminator" : [{ "type" : "value", "path" : "url" }], "description" : "Extensions are always sliced by (at least) url", "rules" : "open" }, "short" : "Additional Content defined by implementations", "definition" : "May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.", "comment" : "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.", "alias" : ["extensions", "user content"], "min" : 0, "max" : "*", "base" : { "path" : "Element.extension", "min" : 0, "max" : "*" }, "type" : [{ "code" : "Extension" }], "mapping" : [{ "identity" : "rim", "map" : "n/a" }] }, { "id" : "Extension.extension:container.extension:description.url", "path" : "Extension.extension.extension.url", "representation" : ["xmlAttr"], "short" : "identifies the meaning of the extension", "definition" : "Source of the definition for the extension code - a logical name or a URL.", "comment" : "The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.", "min" : 1, "max" : "1", "base" : { "path" : "Extension.url", "min" : 1, "max" : "1" }, "type" : [{ "code" : "uri" }], "fixedUri" : "description", "mapping" : [{ "identity" : "rim", "map" : "N/A" }] }, { "id" : "Extension.extension:container.extension:description.value[x]", "path" : "Extension.extension.extension.value[x]", "short" : "The description of the kind of container", "definition" : "The textual description of the kind of container.", "min" : 0, "max" : "1", "base" : { "path" : "Extension.value[x]", "min" : 0, "max" : "1" }, "type" : [{ "code" : "markdown" }], "mapping" : [{ "identity" : "rim", "map" : "N/A" }] }, { "id" : "Extension.extension:container.extension:capacity", "path" : "Extension.extension.extension", "sliceName" : "capacity", "short" : "R5: The capacity of this kind of container (new)", "definition" : "R5: `SpecimenDefinition.typeTested.container.capacity` (new:Quantity[SimpleQuantity])", "comment" : "Element `SpecimenDefinition.typeTested.container.capacity` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.container.capacity` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.container.capacity` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "requirements" : "Element `SpecimenDefinition.typeTested.container.capacity` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.container.capacity` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.container.capacity` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "min" : 0, "max" : "1", "base" : { "path" : "Element.extension", "min" : 0, "max" : "*" }, "type" : [{ "code" : "Extension" }] }, { "id" : "Extension.extension:container.extension:capacity.id", "path" : "Extension.extension.extension.id", "representation" : ["xmlAttr"], "short" : "xml:id (or equivalent in JSON)", "definition" : "unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.", "min" : 0, "max" : "1", "base" : { "path" : "Element.id", "min" : 0, "max" : "1" }, "type" : [{ "code" : "string" }], "mapping" : [{ "identity" : "rim", "map" : "n/a" }] }, { "id" : "Extension.extension:container.extension:capacity.extension", "path" : "Extension.extension.extension.extension", "slicing" : { "discriminator" : [{ "type" : "value", "path" : "url" }], "description" : "Extensions are always sliced by (at least) url", "rules" : "open" }, "short" : "Additional Content defined by implementations", "definition" : "May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.", "comment" : "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.", "alias" : ["extensions", "user content"], "min" : 0, "max" : "*", "base" : { "path" : "Element.extension", "min" : 0, "max" : "*" }, "type" : [{ "code" : "Extension" }], "mapping" : [{ "identity" : "rim", "map" : "n/a" }] }, { "id" : "Extension.extension:container.extension:capacity.url", "path" : "Extension.extension.extension.url", "representation" : ["xmlAttr"], "short" : "identifies the meaning of the extension", "definition" : "Source of the definition for the extension code - a logical name or a URL.", "comment" : "The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.", "min" : 1, "max" : "1", "base" : { "path" : "Extension.url", "min" : 1, "max" : "1" }, "type" : [{ "code" : "uri" }], "fixedUri" : "capacity", "mapping" : [{ "identity" : "rim", "map" : "N/A" }] }, { "id" : "Extension.extension:container.extension:capacity.value[x]", "path" : "Extension.extension.extension.value[x]", "short" : "The capacity of this kind of container", "definition" : "The capacity (volume or other measure) of this kind of container.", "min" : 0, "max" : "1", "base" : { "path" : "Extension.value[x]", "min" : 0, "max" : "1" }, "type" : [{ "code" : "Quantity", "profile" : "http://hl7.org/fhir/StructureDefinition/SimpleQuantity" }], "mapping" : [{ "identity" : "rim", "map" : "N/A" }] }, { "id" : "Extension.extension:container.extension:minimumVolume", "path" : "Extension.extension.extension", "sliceName" : "minimumVolume", "short" : "R5: Minimum volume (new)", "definition" : "R5: `SpecimenDefinition.typeTested.container.minimumVolume[x]` (new:Quantity[SimpleQuantity], string)", "comment" : "Element `SpecimenDefinition.typeTested.container.minimumVolume[x]` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.container.minimumVolume[x]` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.container.minimumVolume[x]` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "requirements" : "Element `SpecimenDefinition.typeTested.container.minimumVolume[x]` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.container.minimumVolume[x]` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.container.minimumVolume[x]` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "min" : 0, "max" : "1", "base" : { "path" : "Element.extension", "min" : 0, "max" : "*" }, "type" : [{ "code" : "Extension" }] }, { "id" : "Extension.extension:container.extension:minimumVolume.id", "path" : "Extension.extension.extension.id", "representation" : ["xmlAttr"], "short" : "xml:id (or equivalent in JSON)", "definition" : "unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.", "min" : 0, "max" : "1", "base" : { "path" : "Element.id", "min" : 0, "max" : "1" }, "type" : [{ "code" : "string" }], "mapping" : [{ "identity" : "rim", "map" : "n/a" }] }, { "id" : "Extension.extension:container.extension:minimumVolume.extension", "path" : "Extension.extension.extension.extension", "slicing" : { "discriminator" : [{ "type" : "value", "path" : "url" }], "description" : "Extensions are always sliced by (at least) url", "rules" : "open" }, "short" : "Additional Content defined by implementations", "definition" : "May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.", "comment" : "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.", "alias" : ["extensions", "user content"], "min" : 0, "max" : "*", "base" : { "path" : "Element.extension", "min" : 0, "max" : "*" }, "type" : [{ "code" : "Extension" }], "mapping" : [{ "identity" : "rim", "map" : "n/a" }] }, { "id" : "Extension.extension:container.extension:minimumVolume.url", "path" : "Extension.extension.extension.url", "representation" : ["xmlAttr"], "short" : "identifies the meaning of the extension", "definition" : "Source of the definition for the extension code - a logical name or a URL.", "comment" : "The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.", "min" : 1, "max" : "1", "base" : { "path" : "Extension.url", "min" : 1, "max" : "1" }, "type" : [{ "code" : "uri" }], "fixedUri" : "minimumVolume", "mapping" : [{ "identity" : "rim", "map" : "N/A" }] }, { "id" : "Extension.extension:container.extension:minimumVolume.value[x]", "path" : "Extension.extension.extension.value[x]", "short" : "Minimum volume", "definition" : "The minimum volume to be conditioned in the container.", "min" : 0, "max" : "1", "base" : { "path" : "Extension.value[x]", "min" : 0, "max" : "1" }, "type" : [{ "code" : "Quantity", "profile" : "http://hl7.org/fhir/StructureDefinition/SimpleQuantity" }, { "code" : "string" }], "mapping" : [{ "identity" : "rim", "map" : "N/A" }] }, { "id" : "Extension.extension:container.extension:additive", "path" : "Extension.extension.extension", "sliceName" : "additive", "short" : "R5: Additive associated with container (new)", "definition" : "R5: `SpecimenDefinition.typeTested.container.additive` (new:BackboneElement)", "comment" : "Element `SpecimenDefinition.typeTested.container.additive` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.container.additive` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.container.additive` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "requirements" : "Element `SpecimenDefinition.typeTested.container.additive` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.container.additive` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.container.additive` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "min" : 0, "max" : "*", "base" : { "path" : "Element.extension", "min" : 0, "max" : "*" }, "type" : [{ "code" : "Extension" }] }, { "id" : "Extension.extension:container.extension:additive.id", "path" : "Extension.extension.extension.id", "representation" : ["xmlAttr"], "short" : "xml:id (or equivalent in JSON)", "definition" : "unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.", "min" : 0, "max" : "1", "base" : { "path" : "Element.id", "min" : 0, "max" : "1" }, "type" : [{ "code" : "string" }], "mapping" : [{ "identity" : "rim", "map" : "n/a" }] }, { "id" : "Extension.extension:container.extension:additive.extension", "path" : "Extension.extension.extension.extension", "slicing" : { "discriminator" : [{ "type" : "value", "path" : "url" }], "description" : "Extensions are always sliced by (at least) url", "ordered" : false, "rules" : "open" }, "short" : "Extension", "definition" : "An Extension", "min" : 1, "max" : "*", "base" : { "path" : "Element.extension", "min" : 0, "max" : "*" }, "type" : [{ "code" : "Extension" }] }, { "id" : "Extension.extension:container.extension:additive.extension:additive", "path" : "Extension.extension.extension.extension", "sliceName" : "additive", "short" : "R5: Additive associated with container (new)", "definition" : "R5: `SpecimenDefinition.typeTested.container.additive.additive[x]` (new:CodeableConcept, Reference(SubstanceDefinition))", "comment" : "Element `SpecimenDefinition.typeTested.container.additive.additive[x]` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container.additive` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.container.additive.additive[x]` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.container.additive.additive[x]` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "requirements" : "Element `SpecimenDefinition.typeTested.container.additive.additive[x]` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container.additive` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.container.additive.additive[x]` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.container.additive.additive[x]` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "min" : 1, "max" : "1", "base" : { "path" : "Element.extension", "min" : 0, "max" : "*" }, "type" : [{ "code" : "Extension" }] }, { "id" : "Extension.extension:container.extension:additive.extension:additive.id", "path" : "Extension.extension.extension.extension.id", "representation" : ["xmlAttr"], "short" : "xml:id (or equivalent in JSON)", "definition" : "unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.", "min" : 0, "max" : "1", "base" : { "path" : "Element.id", "min" : 0, "max" : "1" }, "type" : [{ "code" : "string" }], "mapping" : [{ "identity" : "rim", "map" : "n/a" }] }, { "id" : "Extension.extension:container.extension:additive.extension:additive.extension", "path" : "Extension.extension.extension.extension.extension", "slicing" : { "discriminator" : [{ "type" : "value", "path" : "url" }], "description" : "Extensions are always sliced by (at least) url", "rules" : "open" }, "short" : "Additional Content defined by implementations", "definition" : "May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.", "comment" : "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.", "alias" : ["extensions", "user content"], "min" : 0, "max" : "*", "base" : { "path" : "Element.extension", "min" : 0, "max" : "*" }, "type" : [{ "code" : "Extension" }], "mapping" : [{ "identity" : "rim", "map" : "n/a" }] }, { "id" : "Extension.extension:container.extension:additive.extension:additive.url", "path" : "Extension.extension.extension.extension.url", "representation" : ["xmlAttr"], "short" : "identifies the meaning of the extension", "definition" : "Source of the definition for the extension code - a logical name or a URL.", "comment" : "The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.", "min" : 1, "max" : "1", "base" : { "path" : "Extension.url", "min" : 1, "max" : "1" }, "type" : [{ "code" : "uri" }], "fixedUri" : "additive", "mapping" : [{ "identity" : "rim", "map" : "N/A" }] }, { "id" : "Extension.extension:container.extension:additive.extension:additive.value[x]", "path" : "Extension.extension.extension.extension.value[x]", "short" : "Additive associated with container", "definition" : "Substance introduced in the kind of container to preserve, maintain or enhance the specimen. Examples: Formalin, Citrate, EDTA.", "min" : 1, "max" : "1", "base" : { "path" : "Extension.value[x]", "min" : 0, "max" : "1" }, "type" : [{ "code" : "CodeableConcept" }, { "code" : "Reference", "targetProfile" : "http://hl7.org/fhir/5.0/StructureDefinition/profile-SubstanceDefinition|0.1.0" }, { "code" : "Reference", "targetProfile" : "http://hl7.org/fhir/StructureDefinition/Basic" }], "binding" : { "strength" : "example", "description" : "Substance added to specimen container.", "valueSetUri" : "http://hl7.org/fhir/ValueSet/v2-0371|2.8.2" }, "mapping" : [{ "identity" : "rim", "map" : "N/A" }] }, { "id" : "Extension.extension:container.extension:additive.url", "path" : "Extension.extension.extension.url", "representation" : ["xmlAttr"], "short" : "identifies the meaning of the extension", "definition" : "Source of the definition for the extension code - a logical name or a URL.", "comment" : "The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.", "min" : 1, "max" : "1", "base" : { "path" : "Extension.url", "min" : 1, "max" : "1" }, "type" : [{ "code" : "uri" }], "fixedUri" : "additive", "mapping" : [{ "identity" : "rim", "map" : "N/A" }] }, { "id" : "Extension.extension:container.extension:additive.value[x]", "path" : "Extension.extension.extension.value[x]", "short" : "Value of extension", "definition" : "Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).", "min" : 0, "max" : "0", "base" : { "path" : "Extension.value[x]", "min" : 0, "max" : "1" }, "type" : [{ "code" : "base64Binary" }, { "code" : "boolean" }, { "code" : "code" }, { "code" : "date" }, { "code" : "dateTime" }, { "code" : "decimal" }, { "code" : "id" }, { "code" : "instant" }, { "code" : "integer" }, { "code" : "markdown" }, { "code" : "oid" }, { "code" : "positiveInt" }, { "code" : "string" }, { "code" : "time" }, { "code" : "unsignedInt" }, { "code" : "uri" }, { "code" : "Address" }, { "code" : "Age" }, { "code" : "Annotation" }, { "code" : "Attachment" }, { "code" : "CodeableConcept" }, { "code" : "Coding" }, { "code" : "ContactPoint" }, { "code" : "Count" }, { "code" : "Distance" }, { "code" : "Duration" }, { "code" : "HumanName" }, { "code" : "Identifier" }, { "code" : "Money" }, { "code" : "Period" }, { "code" : "Quantity" }, { "code" : "Range" }, { "code" : "Ratio" }, { "code" : "Reference" }, { "code" : "SampledData" }, { "code" : "Signature" }, { "code" : "Timing" }, { "code" : "Meta" }], "mapping" : [{ "identity" : "rim", "map" : "N/A" }] }, { "id" : "Extension.extension:container.extension:preparation", "path" : "Extension.extension.extension", "sliceName" : "preparation", "short" : "R5: Special processing applied to the container for this specimen type (new)", "definition" : "R5: `SpecimenDefinition.typeTested.container.preparation` (new:markdown)", "comment" : "Element `SpecimenDefinition.typeTested.container.preparation` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.container.preparation` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.container.preparation` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "requirements" : "Element `SpecimenDefinition.typeTested.container.preparation` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.container.preparation` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.container.preparation` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "min" : 0, "max" : "1", "base" : { "path" : "Element.extension", "min" : 0, "max" : "*" }, "type" : [{ "code" : "Extension" }] }, { "id" : "Extension.extension:container.extension:preparation.id", "path" : "Extension.extension.extension.id", "representation" : ["xmlAttr"], "short" : "xml:id (or equivalent in JSON)", "definition" : "unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.", "min" : 0, "max" : "1", "base" : { "path" : "Element.id", "min" : 0, "max" : "1" }, "type" : [{ "code" : "string" }], "mapping" : [{ "identity" : "rim", "map" : "n/a" }] }, { "id" : "Extension.extension:container.extension:preparation.extension", "path" : "Extension.extension.extension.extension", "slicing" : { "discriminator" : [{ "type" : "value", "path" : "url" }], "description" : "Extensions are always sliced by (at least) url", "rules" : "open" }, "short" : "Additional Content defined by implementations", "definition" : "May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.", "comment" : "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.", "alias" : ["extensions", "user content"], "min" : 0, "max" : "*", "base" : { "path" : "Element.extension", "min" : 0, "max" : "*" }, "type" : [{ "code" : "Extension" }], "mapping" : [{ "identity" : "rim", "map" : "n/a" }] }, { "id" : "Extension.extension:container.extension:preparation.url", "path" : "Extension.extension.extension.url", "representation" : ["xmlAttr"], "short" : "identifies the meaning of the extension", "definition" : "Source of the definition for the extension code - a logical name or a URL.", "comment" : "The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.", "min" : 1, "max" : "1", "base" : { "path" : "Extension.url", "min" : 1, "max" : "1" }, "type" : [{ "code" : "uri" }], "fixedUri" : "preparation", "mapping" : [{ "identity" : "rim", "map" : "N/A" }] }, { "id" : "Extension.extension:container.extension:preparation.value[x]", "path" : "Extension.extension.extension.value[x]", "short" : "Special processing applied to the container for this specimen type", "definition" : "Special processing that should be applied to the container for this kind of specimen.", "min" : 0, "max" : "1", "base" : { "path" : "Extension.value[x]", "min" : 0, "max" : "1" }, "type" : [{ "code" : "markdown" }], "mapping" : [{ "identity" : "rim", "map" : "N/A" }] }, { "id" : "Extension.extension:container.url", "path" : "Extension.extension.url", "representation" : ["xmlAttr"], "short" : "identifies the meaning of the extension", "definition" : "Source of the definition for the extension code - a logical name or a URL.", "comment" : "The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.", "min" : 1, "max" : "1", "base" : { "path" : "Extension.url", "min" : 1, "max" : "1" }, "type" : [{ "code" : "uri" }], "fixedUri" : "container", "mapping" : [{ "identity" : "rim", "map" : "N/A" }] }, { "id" : "Extension.extension:container.value[x]", "path" : "Extension.extension.value[x]", "short" : "Value of extension", "definition" : "Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).", "min" : 0, "max" : "0", "base" : { "path" : "Extension.value[x]", "min" : 0, "max" : "1" }, "type" : [{ "code" : "base64Binary" }, { "code" : "boolean" }, { "code" : "code" }, { "code" : "date" }, { "code" : "dateTime" }, { "code" : "decimal" }, { "code" : "id" }, { "code" : "instant" }, { "code" : "integer" }, { "code" : "markdown" }, { "code" : "oid" }, { "code" : "positiveInt" }, { "code" : "string" }, { "code" : "time" }, { "code" : "unsignedInt" }, { "code" : "uri" }, { "code" : "Address" }, { "code" : "Age" }, { "code" : "Annotation" }, { "code" : "Attachment" }, { "code" : "CodeableConcept" }, { "code" : "Coding" }, { "code" : "ContactPoint" }, { "code" : "Count" }, { "code" : "Distance" }, { "code" : "Duration" }, { "code" : "HumanName" }, { "code" : "Identifier" }, { "code" : "Money" }, { "code" : "Period" }, { "code" : "Quantity" }, { "code" : "Range" }, { "code" : "Ratio" }, { "code" : "Reference" }, { "code" : "SampledData" }, { "code" : "Signature" }, { "code" : "Timing" }, { "code" : "Meta" }], "mapping" : [{ "identity" : "rim", "map" : "N/A" }] }, { "id" : "Extension.extension:requirement", "path" : "Extension.extension", "sliceName" : "requirement", "short" : "R5: Requirements for specimen delivery and special handling (new)", "definition" : "R5: `SpecimenDefinition.typeTested.requirement` (new:markdown)", "comment" : "Element `SpecimenDefinition.typeTested.requirement` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.requirement` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.requirement` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "requirements" : "Element `SpecimenDefinition.typeTested.requirement` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.requirement` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.requirement` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "min" : 0, "max" : "1", "base" : { "path" : "Element.extension", "min" : 0, "max" : "*" }, "type" : [{ "code" : "Extension" }] }, { "id" : "Extension.extension:requirement.id", "path" : "Extension.extension.id", "representation" : ["xmlAttr"], "short" : "xml:id (or equivalent in JSON)", "definition" : "unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.", "min" : 0, "max" : "1", "base" : { "path" : "Element.id", "min" : 0, "max" : "1" }, "type" : [{ "code" : "string" }], "mapping" : [{ "identity" : "rim", "map" : "n/a" }] }, { "id" : "Extension.extension:requirement.extension", "path" : "Extension.extension.extension", "slicing" : { "discriminator" : [{ "type" : "value", "path" : "url" }], "description" : "Extensions are always sliced by (at least) url", "rules" : "open" }, "short" : "Additional Content defined by implementations", "definition" : "May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.", "comment" : "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.", "alias" : ["extensions", "user content"], "min" : 0, "max" : "*", "base" : { "path" : "Element.extension", "min" : 0, "max" : "*" }, "type" : [{ "code" : "Extension" }], "mapping" : [{ "identity" : "rim", "map" : "n/a" }] }, { "id" : "Extension.extension:requirement.url", "path" : "Extension.extension.url", "representation" : ["xmlAttr"], "short" : "identifies the meaning of the extension", "definition" : "Source of the definition for the extension code - a logical name or a URL.", "comment" : "The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.", "min" : 1, "max" : "1", "base" : { "path" : "Extension.url", "min" : 1, "max" : "1" }, "type" : [{ "code" : "uri" }], "fixedUri" : "requirement", "mapping" : [{ "identity" : "rim", "map" : "N/A" }] }, { "id" : "Extension.extension:requirement.value[x]", "path" : "Extension.extension.value[x]", "short" : "Requirements for specimen delivery and special handling", "definition" : "Requirements for delivery and special handling of this kind of conditioned specimen.", "min" : 0, "max" : "1", "base" : { "path" : "Extension.value[x]", "min" : 0, "max" : "1" }, "type" : [{ "code" : "markdown" }], "mapping" : [{ "identity" : "rim", "map" : "N/A" }] }, { "id" : "Extension.extension:retentionTime", "path" : "Extension.extension", "sliceName" : "retentionTime", "short" : "R5: The usual time for retaining this kind of specimen (new)", "definition" : "R5: `SpecimenDefinition.typeTested.retentionTime` (new:Duration)", "comment" : "Element `SpecimenDefinition.typeTested.retentionTime` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.retentionTime` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.retentionTime` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "requirements" : "Element `SpecimenDefinition.typeTested.retentionTime` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.retentionTime` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.retentionTime` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "min" : 0, "max" : "1", "base" : { "path" : "Element.extension", "min" : 0, "max" : "*" }, "type" : [{ "code" : "Extension" }] }, { "id" : "Extension.extension:retentionTime.id", "path" : "Extension.extension.id", "representation" : ["xmlAttr"], "short" : "xml:id (or equivalent in JSON)", "definition" : "unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.", "min" : 0, "max" : "1", "base" : { "path" : "Element.id", "min" : 0, "max" : "1" }, "type" : [{ "code" : "string" }], "mapping" : [{ "identity" : "rim", "map" : "n/a" }] }, { "id" : "Extension.extension:retentionTime.extension", "path" : "Extension.extension.extension", "slicing" : { "discriminator" : [{ "type" : "value", "path" : "url" }], "description" : "Extensions are always sliced by (at least) url", "rules" : "open" }, "short" : "Additional Content defined by implementations", "definition" : "May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.", "comment" : "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.", "alias" : ["extensions", "user content"], "min" : 0, "max" : "*", "base" : { "path" : "Element.extension", "min" : 0, "max" : "*" }, "type" : [{ "code" : "Extension" }], "mapping" : [{ "identity" : "rim", "map" : "n/a" }] }, { "id" : "Extension.extension:retentionTime.url", "path" : "Extension.extension.url", "representation" : ["xmlAttr"], "short" : "identifies the meaning of the extension", "definition" : "Source of the definition for the extension code - a logical name or a URL.", "comment" : "The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.", "min" : 1, "max" : "1", "base" : { "path" : "Extension.url", "min" : 1, "max" : "1" }, "type" : [{ "code" : "uri" }], "fixedUri" : "retentionTime", "mapping" : [{ "identity" : "rim", "map" : "N/A" }] }, { "id" : "Extension.extension:retentionTime.value[x]", "path" : "Extension.extension.value[x]", "short" : "The usual time for retaining this kind of specimen", "definition" : "The usual time that a specimen of this kind is retained after the ordered tests are completed, for the purpose of additional testing.", "min" : 0, "max" : "1", "base" : { "path" : "Extension.value[x]", "min" : 0, "max" : "1" }, "type" : [{ "code" : "Duration" }], "mapping" : [{ "identity" : "rim", "map" : "N/A" }] }, { "id" : "Extension.extension:singleUse", "path" : "Extension.extension", "sliceName" : "singleUse", "short" : "R5: Specimen for single use only (new)", "definition" : "R5: `SpecimenDefinition.typeTested.singleUse` (new:boolean)", "comment" : "Element `SpecimenDefinition.typeTested.singleUse` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.singleUse` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.singleUse` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "requirements" : "Element `SpecimenDefinition.typeTested.singleUse` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.singleUse` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.singleUse` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "min" : 0, "max" : "1", "base" : { "path" : "Element.extension", "min" : 0, "max" : "*" }, "type" : [{ "code" : "Extension" }] }, { "id" : "Extension.extension:singleUse.id", "path" : "Extension.extension.id", "representation" : ["xmlAttr"], "short" : "xml:id (or equivalent in JSON)", "definition" : "unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.", "min" : 0, "max" : "1", "base" : { "path" : "Element.id", "min" : 0, "max" : "1" }, "type" : [{ "code" : "string" }], "mapping" : [{ "identity" : "rim", "map" : "n/a" }] }, { "id" : "Extension.extension:singleUse.extension", "path" : "Extension.extension.extension", "slicing" : { "discriminator" : [{ "type" : "value", "path" : "url" }], "description" : "Extensions are always sliced by (at least) url", "rules" : "open" }, "short" : "Additional Content defined by implementations", "definition" : "May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.", "comment" : "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.", "alias" : ["extensions", "user content"], "min" : 0, "max" : "*", "base" : { "path" : "Element.extension", "min" : 0, "max" : "*" }, "type" : [{ "code" : "Extension" }], "mapping" : [{ "identity" : "rim", "map" : "n/a" }] }, { "id" : "Extension.extension:singleUse.url", "path" : "Extension.extension.url", "representation" : ["xmlAttr"], "short" : "identifies the meaning of the extension", "definition" : "Source of the definition for the extension code - a logical name or a URL.", "comment" : "The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.", "min" : 1, "max" : "1", "base" : { "path" : "Extension.url", "min" : 1, "max" : "1" }, "type" : [{ "code" : "uri" }], "fixedUri" : "singleUse", "mapping" : [{ "identity" : "rim", "map" : "N/A" }] }, { "id" : "Extension.extension:singleUse.value[x]", "path" : "Extension.extension.value[x]", "short" : "Specimen for single use only", "definition" : "Specimen can be used by only one test or panel if the value is \"true\".", "min" : 0, "max" : "1", "base" : { "path" : "Extension.value[x]", "min" : 0, "max" : "1" }, "type" : [{ "code" : "boolean" }], "mapping" : [{ "identity" : "rim", "map" : "N/A" }] }, { "id" : "Extension.extension:rejectionCriterion", "path" : "Extension.extension", "sliceName" : "rejectionCriterion", "short" : "R5: Criterion specified for specimen rejection (new)", "definition" : "R5: `SpecimenDefinition.typeTested.rejectionCriterion` (new:CodeableConcept)", "comment" : "Element `SpecimenDefinition.typeTested.rejectionCriterion` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.rejectionCriterion` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.rejectionCriterion` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "requirements" : "Element `SpecimenDefinition.typeTested.rejectionCriterion` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.rejectionCriterion` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.rejectionCriterion` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "min" : 0, "max" : "*", "base" : { "path" : "Element.extension", "min" : 0, "max" : "*" }, "type" : [{ "code" : "Extension" }] }, { "id" : "Extension.extension:rejectionCriterion.id", "path" : "Extension.extension.id", "representation" : ["xmlAttr"], "short" : "xml:id (or equivalent in JSON)", "definition" : "unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.", "min" : 0, "max" : "1", "base" : { "path" : "Element.id", "min" : 0, "max" : "1" }, "type" : [{ "code" : "string" }], "mapping" : [{ "identity" : "rim", "map" : "n/a" }] }, { "id" : "Extension.extension:rejectionCriterion.extension", "path" : "Extension.extension.extension", "slicing" : { "discriminator" : [{ "type" : "value", "path" : "url" }], "description" : "Extensions are always sliced by (at least) url", "rules" : "open" }, "short" : "Additional Content defined by implementations", "definition" : "May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.", "comment" : "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.", "alias" : ["extensions", "user content"], "min" : 0, "max" : "*", "base" : { "path" : "Element.extension", "min" : 0, "max" : "*" }, "type" : [{ "code" : "Extension" }], "mapping" : [{ "identity" : "rim", "map" : "n/a" }] }, { "id" : "Extension.extension:rejectionCriterion.url", "path" : "Extension.extension.url", "representation" : ["xmlAttr"], "short" : "identifies the meaning of the extension", "definition" : "Source of the definition for the extension code - a logical name or a URL.", "comment" : "The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.", "min" : 1, "max" : "1", "base" : { "path" : "Extension.url", "min" : 1, "max" : "1" }, "type" : [{ "code" : "uri" }], "fixedUri" : "rejectionCriterion", "mapping" : [{ "identity" : "rim", "map" : "N/A" }] }, { "id" : "Extension.extension:rejectionCriterion.value[x]", "path" : "Extension.extension.value[x]", "short" : "Criterion specified for specimen rejection", "definition" : "Criterion for rejection of the specimen in its container by the laboratory.", "min" : 0, "max" : "1", "base" : { "path" : "Extension.value[x]", "min" : 0, "max" : "1" }, "type" : [{ "code" : "CodeableConcept" }], "binding" : { "strength" : "example", "description" : "Criterion for rejection of the specimen by laboratory.", "valueSetUri" : "http://hl7.org/fhir/uv/xver/ValueSet/R5-rejection-criteria-for-R3|0.1.0" }, "mapping" : [{ "identity" : "rim", "map" : "N/A" }] }, { "id" : "Extension.extension:handling", "path" : "Extension.extension", "sliceName" : "handling", "short" : "R5: Specimen handling before testing (new)", "definition" : "R5: `SpecimenDefinition.typeTested.handling` (new:BackboneElement)", "comment" : "Element `SpecimenDefinition.typeTested.handling` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.handling` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.handling` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "requirements" : "Element `SpecimenDefinition.typeTested.handling` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.handling` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.handling` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "min" : 0, "max" : "*", "base" : { "path" : "Element.extension", "min" : 0, "max" : "*" }, "type" : [{ "code" : "Extension" }] }, { "id" : "Extension.extension:handling.id", "path" : "Extension.extension.id", "representation" : ["xmlAttr"], "short" : "xml:id (or equivalent in JSON)", "definition" : "unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.", "min" : 0, "max" : "1", "base" : { "path" : "Element.id", "min" : 0, "max" : "1" }, "type" : [{ "code" : "string" }], "mapping" : [{ "identity" : "rim", "map" : "n/a" }] }, { "id" : "Extension.extension:handling.extension", "path" : "Extension.extension.extension", "slicing" : { "discriminator" : [{ "type" : "value", "path" : "url" }], "description" : "Extensions are always sliced by (at least) url", "ordered" : false, "rules" : "open" }, "short" : "Extension", "definition" : "An Extension", "min" : 0, "max" : "*", "base" : { "path" : "Element.extension", "min" : 0, "max" : "*" }, "type" : [{ "code" : "Extension" }] }, { "id" : "Extension.extension:handling.extension:temperatureQualifier", "path" : "Extension.extension.extension", "sliceName" : "temperatureQualifier", "short" : "R5: Qualifies the interval of temperature (new)", "definition" : "R5: `SpecimenDefinition.typeTested.handling.temperatureQualifier` (new:CodeableConcept)", "comment" : "Element `SpecimenDefinition.typeTested.handling.temperatureQualifier` is part of an existing definition because parent element `SpecimenDefinition.typeTested.handling` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.handling.temperatureQualifier` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.handling.temperatureQualifier` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "requirements" : "Element `SpecimenDefinition.typeTested.handling.temperatureQualifier` is part of an existing definition because parent element `SpecimenDefinition.typeTested.handling` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.handling.temperatureQualifier` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.handling.temperatureQualifier` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "min" : 0, "max" : "1", "base" : { "path" : "Element.extension", "min" : 0, "max" : "*" }, "type" : [{ "code" : "Extension" }] }, { "id" : "Extension.extension:handling.extension:temperatureQualifier.id", "path" : "Extension.extension.extension.id", "representation" : ["xmlAttr"], "short" : "xml:id (or equivalent in JSON)", "definition" : "unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.", "min" : 0, "max" : "1", "base" : { "path" : "Element.id", "min" : 0, "max" : "1" }, "type" : [{ "code" : "string" }], "mapping" : [{ "identity" : "rim", "map" : "n/a" }] }, { "id" : "Extension.extension:handling.extension:temperatureQualifier.extension", "path" : "Extension.extension.extension.extension", "slicing" : { "discriminator" : [{ "type" : "value", "path" : "url" }], "description" : "Extensions are always sliced by (at least) url", "rules" : "open" }, "short" : "Additional Content defined by implementations", "definition" : "May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.", "comment" : "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.", "alias" : ["extensions", "user content"], "min" : 0, "max" : "*", "base" : { "path" : "Element.extension", "min" : 0, "max" : "*" }, "type" : [{ "code" : "Extension" }], "mapping" : [{ "identity" : "rim", "map" : "n/a" }] }, { "id" : "Extension.extension:handling.extension:temperatureQualifier.url", "path" : "Extension.extension.extension.url", "representation" : ["xmlAttr"], "short" : "identifies the meaning of the extension", "definition" : "Source of the definition for the extension code - a logical name or a URL.", "comment" : "The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.", "min" : 1, "max" : "1", "base" : { "path" : "Extension.url", "min" : 1, "max" : "1" }, "type" : [{ "code" : "uri" }], "fixedUri" : "temperatureQualifier", "mapping" : [{ "identity" : "rim", "map" : "N/A" }] }, { "id" : "Extension.extension:handling.extension:temperatureQualifier.value[x]", "path" : "Extension.extension.extension.value[x]", "short" : "Qualifies the interval of temperature", "definition" : "It qualifies the interval of temperature, which characterizes an occurrence of handling. Conditions that are not related to temperature may be handled in the instruction element.", "min" : 0, "max" : "1", "base" : { "path" : "Extension.value[x]", "min" : 0, "max" : "1" }, "type" : [{ "code" : "CodeableConcept" }], "binding" : { "strength" : "example", "description" : "Set of handling instructions prior testing of the specimen.", "valueSetUri" : "http://hl7.org/fhir/uv/xver/ValueSet/R5-handling-condition-for-R3|0.1.0" }, "mapping" : [{ "identity" : "rim", "map" : "N/A" }] }, { "id" : "Extension.extension:handling.extension:temperatureRange", "path" : "Extension.extension.extension", "sliceName" : "temperatureRange", "short" : "R5: Temperature range for these handling instructions (new)", "definition" : "R5: `SpecimenDefinition.typeTested.handling.temperatureRange` (new:Range)", "comment" : "Element `SpecimenDefinition.typeTested.handling.temperatureRange` is part of an existing definition because parent element `SpecimenDefinition.typeTested.handling` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.handling.temperatureRange` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.handling.temperatureRange` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "requirements" : "Element `SpecimenDefinition.typeTested.handling.temperatureRange` is part of an existing definition because parent element `SpecimenDefinition.typeTested.handling` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.handling.temperatureRange` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.handling.temperatureRange` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "min" : 0, "max" : "1", "base" : { "path" : "Element.extension", "min" : 0, "max" : "*" }, "type" : [{ "code" : "Extension" }] }, { "id" : "Extension.extension:handling.extension:temperatureRange.id", "path" : "Extension.extension.extension.id", "representation" : ["xmlAttr"], "short" : "xml:id (or equivalent in JSON)", "definition" : "unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.", "min" : 0, "max" : "1", "base" : { "path" : "Element.id", "min" : 0, "max" : "1" }, "type" : [{ "code" : "string" }], "mapping" : [{ "identity" : "rim", "map" : "n/a" }] }, { "id" : "Extension.extension:handling.extension:temperatureRange.extension", "path" : "Extension.extension.extension.extension", "slicing" : { "discriminator" : [{ "type" : "value", "path" : "url" }], "description" : "Extensions are always sliced by (at least) url", "rules" : "open" }, "short" : "Additional Content defined by implementations", "definition" : "May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.", "comment" : "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.", "alias" : ["extensions", "user content"], "min" : 0, "max" : "*", "base" : { "path" : "Element.extension", "min" : 0, "max" : "*" }, "type" : [{ "code" : "Extension" }], "mapping" : [{ "identity" : "rim", "map" : "n/a" }] }, { "id" : "Extension.extension:handling.extension:temperatureRange.url", "path" : "Extension.extension.extension.url", "representation" : ["xmlAttr"], "short" : "identifies the meaning of the extension", "definition" : "Source of the definition for the extension code - a logical name or a URL.", "comment" : "The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.", "min" : 1, "max" : "1", "base" : { "path" : "Extension.url", "min" : 1, "max" : "1" }, "type" : [{ "code" : "uri" }], "fixedUri" : "temperatureRange", "mapping" : [{ "identity" : "rim", "map" : "N/A" }] }, { "id" : "Extension.extension:handling.extension:temperatureRange.value[x]", "path" : "Extension.extension.extension.value[x]", "short" : "Temperature range for these handling instructions", "definition" : "The temperature interval for this set of handling instructions.", "min" : 0, "max" : "1", "base" : { "path" : "Extension.value[x]", "min" : 0, "max" : "1" }, "type" : [{ "code" : "Range" }], "mapping" : [{ "identity" : "rim", "map" : "N/A" }] }, { "id" : "Extension.extension:handling.extension:maxDuration", "path" : "Extension.extension.extension", "sliceName" : "maxDuration", "short" : "R5: Maximum preservation time (new)", "definition" : "R5: `SpecimenDefinition.typeTested.handling.maxDuration` (new:Duration)", "comment" : "Element `SpecimenDefinition.typeTested.handling.maxDuration` is part of an existing definition because parent element `SpecimenDefinition.typeTested.handling` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.handling.maxDuration` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.handling.maxDuration` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "requirements" : "Element `SpecimenDefinition.typeTested.handling.maxDuration` is part of an existing definition because parent element `SpecimenDefinition.typeTested.handling` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.handling.maxDuration` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.handling.maxDuration` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "min" : 0, "max" : "1", "base" : { "path" : "Element.extension", "min" : 0, "max" : "*" }, "type" : [{ "code" : "Extension" }] }, { "id" : "Extension.extension:handling.extension:maxDuration.id", "path" : "Extension.extension.extension.id", "representation" : ["xmlAttr"], "short" : "xml:id (or equivalent in JSON)", "definition" : "unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.", "min" : 0, "max" : "1", "base" : { "path" : "Element.id", "min" : 0, "max" : "1" }, "type" : [{ "code" : "string" }], "mapping" : [{ "identity" : "rim", "map" : "n/a" }] }, { "id" : "Extension.extension:handling.extension:maxDuration.extension", "path" : "Extension.extension.extension.extension", "slicing" : { "discriminator" : [{ "type" : "value", "path" : "url" }], "description" : "Extensions are always sliced by (at least) url", "rules" : "open" }, "short" : "Additional Content defined by implementations", "definition" : "May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.", "comment" : "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.", "alias" : ["extensions", "user content"], "min" : 0, "max" : "*", "base" : { "path" : "Element.extension", "min" : 0, "max" : "*" }, "type" : [{ "code" : "Extension" }], "mapping" : [{ "identity" : "rim", "map" : "n/a" }] }, { "id" : "Extension.extension:handling.extension:maxDuration.url", "path" : "Extension.extension.extension.url", "representation" : ["xmlAttr"], "short" : "identifies the meaning of the extension", "definition" : "Source of the definition for the extension code - a logical name or a URL.", "comment" : "The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.", "min" : 1, "max" : "1", "base" : { "path" : "Extension.url", "min" : 1, "max" : "1" }, "type" : [{ "code" : "uri" }], "fixedUri" : "maxDuration", "mapping" : [{ "identity" : "rim", "map" : "N/A" }] }, { "id" : "Extension.extension:handling.extension:maxDuration.value[x]", "path" : "Extension.extension.extension.value[x]", "short" : "Maximum preservation time", "definition" : "The maximum time interval of preservation of the specimen with these conditions.", "min" : 0, "max" : "1", "base" : { "path" : "Extension.value[x]", "min" : 0, "max" : "1" }, "type" : [{ "code" : "Duration" }], "mapping" : [{ "identity" : "rim", "map" : "N/A" }] }, { "id" : "Extension.extension:handling.extension:instruction", "path" : "Extension.extension.extension", "sliceName" : "instruction", "short" : "R5: Preservation instruction (new)", "definition" : "R5: `SpecimenDefinition.typeTested.handling.instruction` (new:markdown)", "comment" : "Element `SpecimenDefinition.typeTested.handling.instruction` is part of an existing definition because parent element `SpecimenDefinition.typeTested.handling` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.handling.instruction` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.handling.instruction` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "requirements" : "Element `SpecimenDefinition.typeTested.handling.instruction` is part of an existing definition because parent element `SpecimenDefinition.typeTested.handling` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.handling.instruction` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.handling.instruction` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "min" : 0, "max" : "1", "base" : { "path" : "Element.extension", "min" : 0, "max" : "*" }, "type" : [{ "code" : "Extension" }] }, { "id" : "Extension.extension:handling.extension:instruction.id", "path" : "Extension.extension.extension.id", "representation" : ["xmlAttr"], "short" : "xml:id (or equivalent in JSON)", "definition" : "unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.", "min" : 0, "max" : "1", "base" : { "path" : "Element.id", "min" : 0, "max" : "1" }, "type" : [{ "code" : "string" }], "mapping" : [{ "identity" : "rim", "map" : "n/a" }] }, { "id" : "Extension.extension:handling.extension:instruction.extension", "path" : "Extension.extension.extension.extension", "slicing" : { "discriminator" : [{ "type" : "value", "path" : "url" }], "description" : "Extensions are always sliced by (at least) url", "rules" : "open" }, "short" : "Additional Content defined by implementations", "definition" : "May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.", "comment" : "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.", "alias" : ["extensions", "user content"], "min" : 0, "max" : "*", "base" : { "path" : "Element.extension", "min" : 0, "max" : "*" }, "type" : [{ "code" : "Extension" }], "mapping" : [{ "identity" : "rim", "map" : "n/a" }] }, { "id" : "Extension.extension:handling.extension:instruction.url", "path" : "Extension.extension.extension.url", "representation" : ["xmlAttr"], "short" : "identifies the meaning of the extension", "definition" : "Source of the definition for the extension code - a logical name or a URL.", "comment" : "The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.", "min" : 1, "max" : "1", "base" : { "path" : "Extension.url", "min" : 1, "max" : "1" }, "type" : [{ "code" : "uri" }], "fixedUri" : "instruction", "mapping" : [{ "identity" : "rim", "map" : "N/A" }] }, { "id" : "Extension.extension:handling.extension:instruction.value[x]", "path" : "Extension.extension.extension.value[x]", "short" : "Preservation instruction", "definition" : "Additional textual instructions for the preservation or transport of the specimen. For instance, 'Protect from light exposure'.", "min" : 0, "max" : "1", "base" : { "path" : "Extension.value[x]", "min" : 0, "max" : "1" }, "type" : [{ "code" : "markdown" }], "mapping" : [{ "identity" : "rim", "map" : "N/A" }] }, { "id" : "Extension.extension:handling.url", "path" : "Extension.extension.url", "representation" : ["xmlAttr"], "short" : "identifies the meaning of the extension", "definition" : "Source of the definition for the extension code - a logical name or a URL.", "comment" : "The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.", "min" : 1, "max" : "1", "base" : { "path" : "Extension.url", "min" : 1, "max" : "1" }, "type" : [{ "code" : "uri" }], "fixedUri" : "handling", "mapping" : [{ "identity" : "rim", "map" : "N/A" }] }, { "id" : "Extension.extension:handling.value[x]", "path" : "Extension.extension.value[x]", "short" : "Value of extension", "definition" : "Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).", "min" : 0, "max" : "0", "base" : { "path" : "Extension.value[x]", "min" : 0, "max" : "1" }, "type" : [{ "code" : "base64Binary" }, { "code" : "boolean" }, { "code" : "code" }, { "code" : "date" }, { "code" : "dateTime" }, { "code" : "decimal" }, { "code" : "id" }, { "code" : "instant" }, { "code" : "integer" }, { "code" : "markdown" }, { "code" : "oid" }, { "code" : "positiveInt" }, { "code" : "string" }, { "code" : "time" }, { "code" : "unsignedInt" }, { "code" : "uri" }, { "code" : "Address" }, { "code" : "Age" }, { "code" : "Annotation" }, { "code" : "Attachment" }, { "code" : "CodeableConcept" }, { "code" : "Coding" }, { "code" : "ContactPoint" }, { "code" : "Count" }, { "code" : "Distance" }, { "code" : "Duration" }, { "code" : "HumanName" }, { "code" : "Identifier" }, { "code" : "Money" }, { "code" : "Period" }, { "code" : "Quantity" }, { "code" : "Range" }, { "code" : "Ratio" }, { "code" : "Reference" }, { "code" : "SampledData" }, { "code" : "Signature" }, { "code" : "Timing" }, { "code" : "Meta" }], "mapping" : [{ "identity" : "rim", "map" : "N/A" }] }, { "id" : "Extension.extension:testingDestination", "path" : "Extension.extension", "sliceName" : "testingDestination", "short" : "R5: Where the specimen will be tested (new)", "definition" : "R5: `SpecimenDefinition.typeTested.testingDestination` (new:CodeableConcept)", "comment" : "Element `SpecimenDefinition.typeTested.testingDestination` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.testingDestination` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.testingDestination` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "requirements" : "Element `SpecimenDefinition.typeTested.testingDestination` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.testingDestination` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.testingDestination` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "min" : 0, "max" : "*", "base" : { "path" : "Element.extension", "min" : 0, "max" : "*" }, "type" : [{ "code" : "Extension" }] }, { "id" : "Extension.extension:testingDestination.id", "path" : "Extension.extension.id", "representation" : ["xmlAttr"], "short" : "xml:id (or equivalent in JSON)", "definition" : "unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.", "min" : 0, "max" : "1", "base" : { "path" : "Element.id", "min" : 0, "max" : "1" }, "type" : [{ "code" : "string" }], "mapping" : [{ "identity" : "rim", "map" : "n/a" }] }, { "id" : "Extension.extension:testingDestination.extension", "path" : "Extension.extension.extension", "slicing" : { "discriminator" : [{ "type" : "value", "path" : "url" }], "description" : "Extensions are always sliced by (at least) url", "rules" : "open" }, "short" : "Additional Content defined by implementations", "definition" : "May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.", "comment" : "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.", "alias" : ["extensions", "user content"], "min" : 0, "max" : "*", "base" : { "path" : "Element.extension", "min" : 0, "max" : "*" }, "type" : [{ "code" : "Extension" }], "mapping" : [{ "identity" : "rim", "map" : "n/a" }] }, { "id" : "Extension.extension:testingDestination.url", "path" : "Extension.extension.url", "representation" : ["xmlAttr"], "short" : "identifies the meaning of the extension", "definition" : "Source of the definition for the extension code - a logical name or a URL.", "comment" : "The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.", "min" : 1, "max" : "1", "base" : { "path" : "Extension.url", "min" : 1, "max" : "1" }, "type" : [{ "code" : "uri" }], "fixedUri" : "testingDestination", "mapping" : [{ "identity" : "rim", "map" : "N/A" }] }, { "id" : "Extension.extension:testingDestination.value[x]", "path" : "Extension.extension.value[x]", "short" : "Where the specimen will be tested", "definition" : "Where the specimen will be tested: e.g., lab, sector, device or any combination of these.", "min" : 0, "max" : "1", "base" : { "path" : "Extension.value[x]", "min" : 0, "max" : "1" }, "type" : [{ "code" : "CodeableConcept" }], "binding" : { "strength" : "example", "description" : "Codes specifying where the specimen will be tested.", "valueSetUri" : "http://hl7.org/fhir/ValueSet/diagnostic-service-sections|3.0.2" }, "mapping" : [{ "identity" : "rim", "map" : "N/A" }] }, { "id" : "Extension.url", "path" : "Extension.url", "representation" : ["xmlAttr"], "short" : "identifies the meaning of the extension", "definition" : "Source of the definition for the extension code - a logical name or a URL.", "comment" : "The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.", "min" : 1, "max" : "1", "base" : { "path" : "Extension.url", "min" : 1, "max" : "1" }, "type" : [{ "code" : "uri" }], "fixedUri" : "http://hl7.org/fhir/5.0/StructureDefinition/extension-SpecimenDefinition.typeTested", "mapping" : [{ "identity" : "rim", "map" : "N/A" }] }, { "id" : "Extension.value[x]", "path" : "Extension.value[x]", "short" : "Value of extension", "definition" : "Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).", "min" : 0, "max" : "0", "base" : { "path" : "Extension.value[x]", "min" : 0, "max" : "1" }, "type" : [{ "code" : "base64Binary" }, { "code" : "boolean" }, { "code" : "code" }, { "code" : "date" }, { "code" : "dateTime" }, { "code" : "decimal" }, { "code" : "id" }, { "code" : "instant" }, { "code" : "integer" }, { "code" : "markdown" }, { "code" : "oid" }, { "code" : "positiveInt" }, { "code" : "string" }, { "code" : "time" }, { "code" : "unsignedInt" }, { "code" : "uri" }, { "code" : "Address" }, { "code" : "Age" }, { "code" : "Annotation" }, { "code" : "Attachment" }, { "code" : "CodeableConcept" }, { "code" : "Coding" }, { "code" : "ContactPoint" }, { "code" : "Count" }, { "code" : "Distance" }, { "code" : "Duration" }, { "code" : "HumanName" }, { "code" : "Identifier" }, { "code" : "Money" }, { "code" : "Period" }, { "code" : "Quantity" }, { "code" : "Range" }, { "code" : "Ratio" }, { "code" : "Reference" }, { "code" : "SampledData" }, { "code" : "Signature" }, { "code" : "Timing" }, { "code" : "Meta" }], "mapping" : [{ "identity" : "rim", "map" : "N/A" }] }] }, "differential" : { "element" : [{ "id" : "Extension", "path" : "Extension", "short" : "R5: Specimen in container intended for testing by lab (new)", "definition" : "R5: `SpecimenDefinition.typeTested` (new:BackboneElement)", "comment" : "Element `SpecimenDefinition.typeTested` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "min" : 0, "max" : "*", "base" : { "path" : "Extension", "min" : 0, "max" : "*" }, "isModifier" : false }, { "id" : "Extension.extension", "path" : "Extension.extension", "slicing" : { "discriminator" : [{ "type" : "value", "path" : "url" }], "ordered" : false, "rules" : "open" }, "min" : 1, "max" : "*", "base" : { "path" : "Extension.extension", "min" : 0, "max" : "*" } }, { "id" : "Extension.extension:isDerived", "path" : "Extension.extension", "sliceName" : "isDerived", "short" : "R5: Primary or secondary specimen (new)", "definition" : "R5: `SpecimenDefinition.typeTested.isDerived` (new:boolean)", "comment" : "Element `SpecimenDefinition.typeTested.isDerived` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.isDerived` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.isDerived` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "requirements" : "Element `SpecimenDefinition.typeTested.isDerived` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.isDerived` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.isDerived` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "min" : 0, "max" : "1", "base" : { "path" : "Extension.extension", "min" : 0, "max" : "*" } }, { "id" : "Extension.extension:isDerived.url", "path" : "Extension.extension.url", "min" : 1, "max" : "1", "base" : { "path" : "Extension.url", "min" : 1, "max" : "1" }, "fixedUri" : "isDerived" }, { "id" : "Extension.extension:isDerived.value[x]", "path" : "Extension.extension.value[x]", "short" : "Primary or secondary specimen", "definition" : "Primary of secondary specimen.", "min" : 0, "max" : "1", "base" : { "path" : "Extension.value[x]", "min" : 0, "max" : "1" }, "type" : [{ "code" : "boolean" }] }, { "id" : "Extension.extension:type", "path" : "Extension.extension", "sliceName" : "type", "short" : "R5: Type of intended specimen (new)", "definition" : "R5: `SpecimenDefinition.typeTested.type` (new:CodeableConcept)", "comment" : "Element `SpecimenDefinition.typeTested.type` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.type` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.type` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "requirements" : "Element `SpecimenDefinition.typeTested.type` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.type` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.type` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "min" : 0, "max" : "1", "base" : { "path" : "Extension.extension", "min" : 0, "max" : "*" } }, { "id" : "Extension.extension:type.url", "path" : "Extension.extension.url", "min" : 1, "max" : "1", "base" : { "path" : "Extension.url", "min" : 1, "max" : "1" }, "fixedUri" : "type" }, { "id" : "Extension.extension:type.value[x]", "path" : "Extension.extension.value[x]", "short" : "Type of intended specimen", "definition" : "The kind of specimen conditioned for testing expected by lab.", "min" : 0, "max" : "1", "base" : { "path" : "Extension.value[x]", "min" : 0, "max" : "1" }, "type" : [{ "code" : "CodeableConcept" }], "binding" : { "strength" : "example", "description" : "The type of specimen conditioned in a container for lab testing.", "valueSetUri" : "http://hl7.org/fhir/ValueSet/v2-0487|2.8.2" } }, { "id" : "Extension.extension:preference", "path" : "Extension.extension", "sliceName" : "preference", "short" : "R5: preferred | alternate (new)", "definition" : "R5: `SpecimenDefinition.typeTested.preference` (new:code)", "comment" : "Element `SpecimenDefinition.typeTested.preference` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.preference` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.preference` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "requirements" : "Element `SpecimenDefinition.typeTested.preference` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.preference` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.preference` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "min" : 1, "max" : "1", "base" : { "path" : "Extension.extension", "min" : 0, "max" : "*" } }, { "id" : "Extension.extension:preference.url", "path" : "Extension.extension.url", "min" : 1, "max" : "1", "base" : { "path" : "Extension.url", "min" : 1, "max" : "1" }, "fixedUri" : "preference" }, { "id" : "Extension.extension:preference.value[x]", "path" : "Extension.extension.value[x]", "short" : "preferred | alternate", "definition" : "The preference for this type of conditioned specimen.", "min" : 1, "max" : "1", "base" : { "path" : "Extension.value[x]", "min" : 0, "max" : "1" }, "type" : [{ "code" : "code" }], "binding" : { "strength" : "required", "description" : "Degree of preference of a type of conditioned specimen.", "valueSetUri" : "http://hl7.org/fhir/uv/xver/ValueSet/R5-specimen-contained-preference-for-R3|0.1.0" } }, { "id" : "Extension.extension:container", "path" : "Extension.extension", "sliceName" : "container", "short" : "R5: The specimen's container (new)", "definition" : "R5: `SpecimenDefinition.typeTested.container` (new:BackboneElement)", "comment" : "Element `SpecimenDefinition.typeTested.container` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.container` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.container` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "requirements" : "Element `SpecimenDefinition.typeTested.container` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.container` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.container` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "min" : 0, "max" : "1", "base" : { "path" : "Extension.extension", "min" : 0, "max" : "*" } }, { "id" : "Extension.extension:container.extension", "path" : "Extension.extension.extension", "slicing" : { "discriminator" : [{ "type" : "value", "path" : "url" }], "ordered" : false, "rules" : "open" }, "min" : 0, "max" : "*", "base" : { "path" : "Extension.extension", "min" : 0, "max" : "*" } }, { "id" : "Extension.extension:container.extension:material", "path" : "Extension.extension.extension", "sliceName" : "material", "short" : "R5: The material type used for the container (new)", "definition" : "R5: `SpecimenDefinition.typeTested.container.material` (new:CodeableConcept)", "comment" : "Element `SpecimenDefinition.typeTested.container.material` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.container.material` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.container.material` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nExamples: glass, plastic, metal.", "requirements" : "Element `SpecimenDefinition.typeTested.container.material` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.container.material` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.container.material` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "min" : 0, "max" : "1", "base" : { "path" : "Extension.extension", "min" : 0, "max" : "*" } }, { "id" : "Extension.extension:container.extension:material.url", "path" : "Extension.extension.extension.url", "min" : 1, "max" : "1", "base" : { "path" : "Extension.url", "min" : 1, "max" : "1" }, "fixedUri" : "material" }, { "id" : "Extension.extension:container.extension:material.value[x]", "path" : "Extension.extension.extension.value[x]", "short" : "The material type used for the container", "definition" : "The type of material of the container.", "comment" : "Examples: glass, plastic, metal.", "min" : 0, "max" : "1", "base" : { "path" : "Extension.value[x]", "min" : 0, "max" : "1" }, "type" : [{ "code" : "CodeableConcept" }] }, { "id" : "Extension.extension:container.extension:type", "path" : "Extension.extension.extension", "sliceName" : "type", "short" : "R5: Kind of container associated with the kind of specimen (new)", "definition" : "R5: `SpecimenDefinition.typeTested.container.type` (new:CodeableConcept)", "comment" : "Element `SpecimenDefinition.typeTested.container.type` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.container.type` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.container.type` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "requirements" : "Element `SpecimenDefinition.typeTested.container.type` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.container.type` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.container.type` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "min" : 0, "max" : "1", "base" : { "path" : "Extension.extension", "min" : 0, "max" : "*" } }, { "id" : "Extension.extension:container.extension:type.url", "path" : "Extension.extension.extension.url", "min" : 1, "max" : "1", "base" : { "path" : "Extension.url", "min" : 1, "max" : "1" }, "fixedUri" : "type" }, { "id" : "Extension.extension:container.extension:type.value[x]", "path" : "Extension.extension.extension.value[x]", "short" : "Kind of container associated with the kind of specimen", "definition" : "The type of container used to contain this kind of specimen.", "min" : 0, "max" : "1", "base" : { "path" : "Extension.value[x]", "min" : 0, "max" : "1" }, "type" : [{ "code" : "CodeableConcept" }] }, { "id" : "Extension.extension:container.extension:cap", "path" : "Extension.extension.extension", "sliceName" : "cap", "short" : "R5: Color of container cap (new)", "definition" : "R5: `SpecimenDefinition.typeTested.container.cap` (new:CodeableConcept)", "comment" : "Element `SpecimenDefinition.typeTested.container.cap` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.container.cap` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.container.cap` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "requirements" : "From ISO 6710-2017 Table F.1 Recommended colour codes. Element `SpecimenDefinition.typeTested.container.cap` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.container.cap` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.container.cap` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "min" : 0, "max" : "1", "base" : { "path" : "Extension.extension", "min" : 0, "max" : "*" } }, { "id" : "Extension.extension:container.extension:cap.url", "path" : "Extension.extension.extension.url", "min" : 1, "max" : "1", "base" : { "path" : "Extension.url", "min" : 1, "max" : "1" }, "fixedUri" : "cap" }, { "id" : "Extension.extension:container.extension:cap.value[x]", "path" : "Extension.extension.extension.value[x]", "short" : "Color of container cap", "definition" : "Color of container cap.", "min" : 0, "max" : "1", "base" : { "path" : "Extension.value[x]", "min" : 0, "max" : "1" }, "type" : [{ "code" : "CodeableConcept" }], "binding" : { "strength" : "example", "description" : "Color of the container cap.", "valueSetUri" : "http://hl7.org/fhir/uv/xver/ValueSet/R5-container-cap-for-R3|0.1.0" } }, { "id" : "Extension.extension:container.extension:description", "path" : "Extension.extension.extension", "sliceName" : "description", "short" : "R5: The description of the kind of container (new)", "definition" : "R5: `SpecimenDefinition.typeTested.container.description` (new:markdown)", "comment" : "Element `SpecimenDefinition.typeTested.container.description` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.container.description` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.container.description` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "requirements" : "Element `SpecimenDefinition.typeTested.container.description` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.container.description` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.container.description` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "min" : 0, "max" : "1", "base" : { "path" : "Extension.extension", "min" : 0, "max" : "*" } }, { "id" : "Extension.extension:container.extension:description.url", "path" : "Extension.extension.extension.url", "min" : 1, "max" : "1", "base" : { "path" : "Extension.url", "min" : 1, "max" : "1" }, "fixedUri" : "description" }, { "id" : "Extension.extension:container.extension:description.value[x]", "path" : "Extension.extension.extension.value[x]", "short" : "The description of the kind of container", "definition" : "The textual description of the kind of container.", "min" : 0, "max" : "1", "base" : { "path" : "Extension.value[x]", "min" : 0, "max" : "1" }, "type" : [{ "code" : "markdown" }] }, { "id" : "Extension.extension:container.extension:capacity", "path" : "Extension.extension.extension", "sliceName" : "capacity", "short" : "R5: The capacity of this kind of container (new)", "definition" : "R5: `SpecimenDefinition.typeTested.container.capacity` (new:Quantity[SimpleQuantity])", "comment" : "Element `SpecimenDefinition.typeTested.container.capacity` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.container.capacity` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.container.capacity` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "requirements" : "Element `SpecimenDefinition.typeTested.container.capacity` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.container.capacity` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.container.capacity` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "min" : 0, "max" : "1", "base" : { "path" : "Extension.extension", "min" : 0, "max" : "*" } }, { "id" : "Extension.extension:container.extension:capacity.url", "path" : "Extension.extension.extension.url", "min" : 1, "max" : "1", "base" : { "path" : "Extension.url", "min" : 1, "max" : "1" }, "fixedUri" : "capacity" }, { "id" : "Extension.extension:container.extension:capacity.value[x]", "path" : "Extension.extension.extension.value[x]", "short" : "The capacity of this kind of container", "definition" : "The capacity (volume or other measure) of this kind of container.", "min" : 0, "max" : "1", "base" : { "path" : "Extension.value[x]", "min" : 0, "max" : "1" }, "type" : [{ "code" : "Quantity", "profile" : "http://hl7.org/fhir/StructureDefinition/SimpleQuantity" }] }, { "id" : "Extension.extension:container.extension:minimumVolume", "path" : "Extension.extension.extension", "sliceName" : "minimumVolume", "short" : "R5: Minimum volume (new)", "definition" : "R5: `SpecimenDefinition.typeTested.container.minimumVolume[x]` (new:Quantity[SimpleQuantity], string)", "comment" : "Element `SpecimenDefinition.typeTested.container.minimumVolume[x]` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.container.minimumVolume[x]` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.container.minimumVolume[x]` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "requirements" : "Element `SpecimenDefinition.typeTested.container.minimumVolume[x]` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.container.minimumVolume[x]` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.container.minimumVolume[x]` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "min" : 0, "max" : "1", "base" : { "path" : "Extension.extension", "min" : 0, "max" : "*" } }, { "id" : "Extension.extension:container.extension:minimumVolume.url", "path" : "Extension.extension.extension.url", "min" : 1, "max" : "1", "base" : { "path" : "Extension.url", "min" : 1, "max" : "1" }, "fixedUri" : "minimumVolume" }, { "id" : "Extension.extension:container.extension:minimumVolume.value[x]", "path" : "Extension.extension.extension.value[x]", "short" : "Minimum volume", "definition" : "The minimum volume to be conditioned in the container.", "min" : 0, "max" : "1", "base" : { "path" : "Extension.value[x]", "min" : 0, "max" : "1" }, "type" : [{ "code" : "Quantity", "profile" : "http://hl7.org/fhir/StructureDefinition/SimpleQuantity" }, { "code" : "string" }] }, { "id" : "Extension.extension:container.extension:additive", "path" : "Extension.extension.extension", "sliceName" : "additive", "short" : "R5: Additive associated with container (new)", "definition" : "R5: `SpecimenDefinition.typeTested.container.additive` (new:BackboneElement)", "comment" : "Element `SpecimenDefinition.typeTested.container.additive` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.container.additive` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.container.additive` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "requirements" : "Element `SpecimenDefinition.typeTested.container.additive` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.container.additive` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.container.additive` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "min" : 0, "max" : "*", "base" : { "path" : "Extension.extension", "min" : 0, "max" : "*" } }, { "id" : "Extension.extension:container.extension:additive.extension", "path" : "Extension.extension.extension.extension", "slicing" : { "discriminator" : [{ "type" : "value", "path" : "url" }], "ordered" : false, "rules" : "open" }, "min" : 1, "max" : "*", "base" : { "path" : "Extension.extension", "min" : 0, "max" : "*" } }, { "id" : "Extension.extension:container.extension:additive.extension:additive", "path" : "Extension.extension.extension.extension", "sliceName" : "additive", "short" : "R5: Additive associated with container (new)", "definition" : "R5: `SpecimenDefinition.typeTested.container.additive.additive[x]` (new:CodeableConcept, Reference(SubstanceDefinition))", "comment" : "Element `SpecimenDefinition.typeTested.container.additive.additive[x]` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container.additive` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.container.additive.additive[x]` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.container.additive.additive[x]` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "requirements" : "Element `SpecimenDefinition.typeTested.container.additive.additive[x]` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container.additive` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.container.additive.additive[x]` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.container.additive.additive[x]` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "min" : 1, "max" : "1", "base" : { "path" : "Extension.extension", "min" : 0, "max" : "*" } }, { "id" : "Extension.extension:container.extension:additive.extension:additive.url", "path" : "Extension.extension.extension.extension.url", "min" : 1, "max" : "1", "base" : { "path" : "Extension.url", "min" : 1, "max" : "1" }, "fixedUri" : "additive" }, { "id" : "Extension.extension:container.extension:additive.extension:additive.value[x]", "path" : "Extension.extension.extension.extension.value[x]", "short" : "Additive associated with container", "definition" : "Substance introduced in the kind of container to preserve, maintain or enhance the specimen. Examples: Formalin, Citrate, EDTA.", "min" : 1, "max" : "1", "base" : { "path" : "Extension.value[x]", "min" : 0, "max" : "1" }, "type" : [{ "code" : "CodeableConcept" }, { "code" : "Reference", "targetProfile" : "http://hl7.org/fhir/5.0/StructureDefinition/profile-SubstanceDefinition|0.1.0" }, { "code" : "Reference", "targetProfile" : "http://hl7.org/fhir/StructureDefinition/Basic" }], "binding" : { "strength" : "example", "description" : "Substance added to specimen container.", "valueSetUri" : "http://hl7.org/fhir/ValueSet/v2-0371|2.8.2" } }, { "id" : "Extension.extension:container.extension:additive.url", "path" : "Extension.extension.extension.url", "min" : 1, "max" : "1", "base" : { "path" : "Extension.url", "min" : 1, "max" : "1" }, "fixedUri" : "additive" }, { "id" : "Extension.extension:container.extension:additive.value[x]", "path" : "Extension.extension.extension.value[x]", "min" : 0, "max" : "0", "base" : { "path" : "Extension.value[x]", "min" : 0, "max" : "1" } }, { "id" : "Extension.extension:container.extension:preparation", "path" : "Extension.extension.extension", "sliceName" : "preparation", "short" : "R5: Special processing applied to the container for this specimen type (new)", "definition" : "R5: `SpecimenDefinition.typeTested.container.preparation` (new:markdown)", "comment" : "Element `SpecimenDefinition.typeTested.container.preparation` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.container.preparation` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.container.preparation` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "requirements" : "Element `SpecimenDefinition.typeTested.container.preparation` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.container.preparation` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.container.preparation` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "min" : 0, "max" : "1", "base" : { "path" : "Extension.extension", "min" : 0, "max" : "*" } }, { "id" : "Extension.extension:container.extension:preparation.url", "path" : "Extension.extension.extension.url", "min" : 1, "max" : "1", "base" : { "path" : "Extension.url", "min" : 1, "max" : "1" }, "fixedUri" : "preparation" }, { "id" : "Extension.extension:container.extension:preparation.value[x]", "path" : "Extension.extension.extension.value[x]", "short" : "Special processing applied to the container for this specimen type", "definition" : "Special processing that should be applied to the container for this kind of specimen.", "min" : 0, "max" : "1", "base" : { "path" : "Extension.value[x]", "min" : 0, "max" : "1" }, "type" : [{ "code" : "markdown" }] }, { "id" : "Extension.extension:container.url", "path" : "Extension.extension.url", "min" : 1, "max" : "1", "base" : { "path" : "Extension.url", "min" : 1, "max" : "1" }, "fixedUri" : "container" }, { "id" : "Extension.extension:container.value[x]", "path" : "Extension.extension.value[x]", "min" : 0, "max" : "0", "base" : { "path" : "Extension.value[x]", "min" : 0, "max" : "1" } }, { "id" : "Extension.extension:requirement", "path" : "Extension.extension", "sliceName" : "requirement", "short" : "R5: Requirements for specimen delivery and special handling (new)", "definition" : "R5: `SpecimenDefinition.typeTested.requirement` (new:markdown)", "comment" : "Element `SpecimenDefinition.typeTested.requirement` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.requirement` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.requirement` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "requirements" : "Element `SpecimenDefinition.typeTested.requirement` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.requirement` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.requirement` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "min" : 0, "max" : "1", "base" : { "path" : "Extension.extension", "min" : 0, "max" : "*" } }, { "id" : "Extension.extension:requirement.url", "path" : "Extension.extension.url", "min" : 1, "max" : "1", "base" : { "path" : "Extension.url", "min" : 1, "max" : "1" }, "fixedUri" : "requirement" }, { "id" : "Extension.extension:requirement.value[x]", "path" : "Extension.extension.value[x]", "short" : "Requirements for specimen delivery and special handling", "definition" : "Requirements for delivery and special handling of this kind of conditioned specimen.", "min" : 0, "max" : "1", "base" : { "path" : "Extension.value[x]", "min" : 0, "max" : "1" }, "type" : [{ "code" : "markdown" }] }, { "id" : "Extension.extension:retentionTime", "path" : "Extension.extension", "sliceName" : "retentionTime", "short" : "R5: The usual time for retaining this kind of specimen (new)", "definition" : "R5: `SpecimenDefinition.typeTested.retentionTime` (new:Duration)", "comment" : "Element `SpecimenDefinition.typeTested.retentionTime` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.retentionTime` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.retentionTime` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "requirements" : "Element `SpecimenDefinition.typeTested.retentionTime` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.retentionTime` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.retentionTime` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "min" : 0, "max" : "1", "base" : { "path" : "Extension.extension", "min" : 0, "max" : "*" } }, { "id" : "Extension.extension:retentionTime.url", "path" : "Extension.extension.url", "min" : 1, "max" : "1", "base" : { "path" : "Extension.url", "min" : 1, "max" : "1" }, "fixedUri" : "retentionTime" }, { "id" : "Extension.extension:retentionTime.value[x]", "path" : "Extension.extension.value[x]", "short" : "The usual time for retaining this kind of specimen", "definition" : "The usual time that a specimen of this kind is retained after the ordered tests are completed, for the purpose of additional testing.", "min" : 0, "max" : "1", "base" : { "path" : "Extension.value[x]", "min" : 0, "max" : "1" }, "type" : [{ "code" : "Duration" }] }, { "id" : "Extension.extension:singleUse", "path" : "Extension.extension", "sliceName" : "singleUse", "short" : "R5: Specimen for single use only (new)", "definition" : "R5: `SpecimenDefinition.typeTested.singleUse` (new:boolean)", "comment" : "Element `SpecimenDefinition.typeTested.singleUse` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.singleUse` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.singleUse` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "requirements" : "Element `SpecimenDefinition.typeTested.singleUse` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.singleUse` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.singleUse` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "min" : 0, "max" : "1", "base" : { "path" : "Extension.extension", "min" : 0, "max" : "*" } }, { "id" : "Extension.extension:singleUse.url", "path" : "Extension.extension.url", "min" : 1, "max" : "1", "base" : { "path" : "Extension.url", "min" : 1, "max" : "1" }, "fixedUri" : "singleUse" }, { "id" : "Extension.extension:singleUse.value[x]", "path" : "Extension.extension.value[x]", "short" : "Specimen for single use only", "definition" : "Specimen can be used by only one test or panel if the value is \"true\".", "min" : 0, "max" : "1", "base" : { "path" : "Extension.value[x]", "min" : 0, "max" : "1" }, "type" : [{ "code" : "boolean" }] }, { "id" : "Extension.extension:rejectionCriterion", "path" : "Extension.extension", "sliceName" : "rejectionCriterion", "short" : "R5: Criterion specified for specimen rejection (new)", "definition" : "R5: `SpecimenDefinition.typeTested.rejectionCriterion` (new:CodeableConcept)", "comment" : "Element `SpecimenDefinition.typeTested.rejectionCriterion` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.rejectionCriterion` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.rejectionCriterion` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "requirements" : "Element `SpecimenDefinition.typeTested.rejectionCriterion` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.rejectionCriterion` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.rejectionCriterion` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "min" : 0, "max" : "*", "base" : { "path" : "Extension.extension", "min" : 0, "max" : "*" } }, { "id" : "Extension.extension:rejectionCriterion.url", "path" : "Extension.extension.url", "min" : 1, "max" : "1", "base" : { "path" : "Extension.url", "min" : 1, "max" : "1" }, "fixedUri" : "rejectionCriterion" }, { "id" : "Extension.extension:rejectionCriterion.value[x]", "path" : "Extension.extension.value[x]", "short" : "Criterion specified for specimen rejection", "definition" : "Criterion for rejection of the specimen in its container by the laboratory.", "min" : 0, "max" : "1", "base" : { "path" : "Extension.value[x]", "min" : 0, "max" : "1" }, "type" : [{ "code" : "CodeableConcept" }], "binding" : { "strength" : "example", "description" : "Criterion for rejection of the specimen by laboratory.", "valueSetUri" : "http://hl7.org/fhir/uv/xver/ValueSet/R5-rejection-criteria-for-R3|0.1.0" } }, { "id" : "Extension.extension:handling", "path" : "Extension.extension", "sliceName" : "handling", "short" : "R5: Specimen handling before testing (new)", "definition" : "R5: `SpecimenDefinition.typeTested.handling` (new:BackboneElement)", "comment" : "Element `SpecimenDefinition.typeTested.handling` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.handling` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.handling` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "requirements" : "Element `SpecimenDefinition.typeTested.handling` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.handling` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.handling` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "min" : 0, "max" : "*", "base" : { "path" : "Extension.extension", "min" : 0, "max" : "*" } }, { "id" : "Extension.extension:handling.extension", "path" : "Extension.extension.extension", "slicing" : { "discriminator" : [{ "type" : "value", "path" : "url" }], "ordered" : false, "rules" : "open" }, "min" : 0, "max" : "*", "base" : { "path" : "Extension.extension", "min" : 0, "max" : "*" } }, { "id" : "Extension.extension:handling.extension:temperatureQualifier", "path" : "Extension.extension.extension", "sliceName" : "temperatureQualifier", "short" : "R5: Qualifies the interval of temperature (new)", "definition" : "R5: `SpecimenDefinition.typeTested.handling.temperatureQualifier` (new:CodeableConcept)", "comment" : "Element `SpecimenDefinition.typeTested.handling.temperatureQualifier` is part of an existing definition because parent element `SpecimenDefinition.typeTested.handling` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.handling.temperatureQualifier` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.handling.temperatureQualifier` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "requirements" : "Element `SpecimenDefinition.typeTested.handling.temperatureQualifier` is part of an existing definition because parent element `SpecimenDefinition.typeTested.handling` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.handling.temperatureQualifier` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.handling.temperatureQualifier` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "min" : 0, "max" : "1", "base" : { "path" : "Extension.extension", "min" : 0, "max" : "*" } }, { "id" : "Extension.extension:handling.extension:temperatureQualifier.url", "path" : "Extension.extension.extension.url", "min" : 1, "max" : "1", "base" : { "path" : "Extension.url", "min" : 1, "max" : "1" }, "fixedUri" : "temperatureQualifier" }, { "id" : "Extension.extension:handling.extension:temperatureQualifier.value[x]", "path" : "Extension.extension.extension.value[x]", "short" : "Qualifies the interval of temperature", "definition" : "It qualifies the interval of temperature, which characterizes an occurrence of handling. Conditions that are not related to temperature may be handled in the instruction element.", "min" : 0, "max" : "1", "base" : { "path" : "Extension.value[x]", "min" : 0, "max" : "1" }, "type" : [{ "code" : "CodeableConcept" }], "binding" : { "strength" : "example", "description" : "Set of handling instructions prior testing of the specimen.", "valueSetUri" : "http://hl7.org/fhir/uv/xver/ValueSet/R5-handling-condition-for-R3|0.1.0" } }, { "id" : "Extension.extension:handling.extension:temperatureRange", "path" : "Extension.extension.extension", "sliceName" : "temperatureRange", "short" : "R5: Temperature range for these handling instructions (new)", "definition" : "R5: `SpecimenDefinition.typeTested.handling.temperatureRange` (new:Range)", "comment" : "Element `SpecimenDefinition.typeTested.handling.temperatureRange` is part of an existing definition because parent element `SpecimenDefinition.typeTested.handling` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.handling.temperatureRange` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.handling.temperatureRange` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "requirements" : "Element `SpecimenDefinition.typeTested.handling.temperatureRange` is part of an existing definition because parent element `SpecimenDefinition.typeTested.handling` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.handling.temperatureRange` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.handling.temperatureRange` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "min" : 0, "max" : "1", "base" : { "path" : "Extension.extension", "min" : 0, "max" : "*" } }, { "id" : "Extension.extension:handling.extension:temperatureRange.url", "path" : "Extension.extension.extension.url", "min" : 1, "max" : "1", "base" : { "path" : "Extension.url", "min" : 1, "max" : "1" }, "fixedUri" : "temperatureRange" }, { "id" : "Extension.extension:handling.extension:temperatureRange.value[x]", "path" : "Extension.extension.extension.value[x]", "short" : "Temperature range for these handling instructions", "definition" : "The temperature interval for this set of handling instructions.", "min" : 0, "max" : "1", "base" : { "path" : "Extension.value[x]", "min" : 0, "max" : "1" }, "type" : [{ "code" : "Range" }] }, { "id" : "Extension.extension:handling.extension:maxDuration", "path" : "Extension.extension.extension", "sliceName" : "maxDuration", "short" : "R5: Maximum preservation time (new)", "definition" : "R5: `SpecimenDefinition.typeTested.handling.maxDuration` (new:Duration)", "comment" : "Element `SpecimenDefinition.typeTested.handling.maxDuration` is part of an existing definition because parent element `SpecimenDefinition.typeTested.handling` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.handling.maxDuration` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.handling.maxDuration` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "requirements" : "Element `SpecimenDefinition.typeTested.handling.maxDuration` is part of an existing definition because parent element `SpecimenDefinition.typeTested.handling` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.handling.maxDuration` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.handling.maxDuration` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "min" : 0, "max" : "1", "base" : { "path" : "Extension.extension", "min" : 0, "max" : "*" } }, { "id" : "Extension.extension:handling.extension:maxDuration.url", "path" : "Extension.extension.extension.url", "min" : 1, "max" : "1", "base" : { "path" : "Extension.url", "min" : 1, "max" : "1" }, "fixedUri" : "maxDuration" }, { "id" : "Extension.extension:handling.extension:maxDuration.value[x]", "path" : "Extension.extension.extension.value[x]", "short" : "Maximum preservation time", "definition" : "The maximum time interval of preservation of the specimen with these conditions.", "min" : 0, "max" : "1", "base" : { "path" : "Extension.value[x]", "min" : 0, "max" : "1" }, "type" : [{ "code" : "Duration" }] }, { "id" : "Extension.extension:handling.extension:instruction", "path" : "Extension.extension.extension", "sliceName" : "instruction", "short" : "R5: Preservation instruction (new)", "definition" : "R5: `SpecimenDefinition.typeTested.handling.instruction` (new:markdown)", "comment" : "Element `SpecimenDefinition.typeTested.handling.instruction` is part of an existing definition because parent element `SpecimenDefinition.typeTested.handling` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.handling.instruction` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.handling.instruction` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "requirements" : "Element `SpecimenDefinition.typeTested.handling.instruction` is part of an existing definition because parent element `SpecimenDefinition.typeTested.handling` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.handling.instruction` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.handling.instruction` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "min" : 0, "max" : "1", "base" : { "path" : "Extension.extension", "min" : 0, "max" : "*" } }, { "id" : "Extension.extension:handling.extension:instruction.url", "path" : "Extension.extension.extension.url", "min" : 1, "max" : "1", "base" : { "path" : "Extension.url", "min" : 1, "max" : "1" }, "fixedUri" : "instruction" }, { "id" : "Extension.extension:handling.extension:instruction.value[x]", "path" : "Extension.extension.extension.value[x]", "short" : "Preservation instruction", "definition" : "Additional textual instructions for the preservation or transport of the specimen. For instance, 'Protect from light exposure'.", "min" : 0, "max" : "1", "base" : { "path" : "Extension.value[x]", "min" : 0, "max" : "1" }, "type" : [{ "code" : "markdown" }] }, { "id" : "Extension.extension:handling.url", "path" : "Extension.extension.url", "min" : 1, "max" : "1", "base" : { "path" : "Extension.url", "min" : 1, "max" : "1" }, "fixedUri" : "handling" }, { "id" : "Extension.extension:handling.value[x]", "path" : "Extension.extension.value[x]", "min" : 0, "max" : "0", "base" : { "path" : "Extension.value[x]", "min" : 0, "max" : "1" } }, { "id" : "Extension.extension:testingDestination", "path" : "Extension.extension", "sliceName" : "testingDestination", "short" : "R5: Where the specimen will be tested (new)", "definition" : "R5: `SpecimenDefinition.typeTested.testingDestination` (new:CodeableConcept)", "comment" : "Element `SpecimenDefinition.typeTested.testingDestination` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.testingDestination` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.testingDestination` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "requirements" : "Element `SpecimenDefinition.typeTested.testingDestination` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.testingDestination` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.testingDestination` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).", "min" : 0, "max" : "*", "base" : { "path" : "Extension.extension", "min" : 0, "max" : "*" } }, { "id" : "Extension.extension:testingDestination.url", "path" : "Extension.extension.url", "min" : 1, "max" : "1", "base" : { "path" : "Extension.url", "min" : 1, "max" : "1" }, "fixedUri" : "testingDestination" }, { "id" : "Extension.extension:testingDestination.value[x]", "path" : "Extension.extension.value[x]", "short" : "Where the specimen will be tested", "definition" : "Where the specimen will be tested: e.g., lab, sector, device or any combination of these.", "min" : 0, "max" : "1", "base" : { "path" : "Extension.value[x]", "min" : 0, "max" : "1" }, "type" : [{ "code" : "CodeableConcept" }], "binding" : { "strength" : "example", "description" : "Codes specifying where the specimen will be tested.", "valueSetUri" : "http://hl7.org/fhir/ValueSet/diagnostic-service-sections|3.0.2" } }, { "id" : "Extension.url", "path" : "Extension.url", "min" : 1, "max" : "1", "base" : { "path" : "Extension.url", "min" : 1, "max" : "1" }, "fixedUri" : "http://hl7.org/fhir/5.0/StructureDefinition/extension-SpecimenDefinition.typeTested" }, { "id" : "Extension.value[x]", "path" : "Extension.value[x]", "min" : 0, "max" : "0", "base" : { "path" : "Extension.value[x]", "min" : 0, "max" : "1" } }] } }