Extensions for Using Data Elements from FHIR R5 in FHIR STU3
0.1.0 - STU International flag

Extensions for Using Data Elements from FHIR R5 in FHIR STU3 - Downloaded Version null See the Directory of published versions

Extension: ExtensionOrganizationAffiliation_Contact - Detailed Descriptions

Page standards status: Trial-use Maturity Level: 0

Definitions for the ext-R5-OrganizationAffiliation.contact extension.

Guidance on how to interpret the contents of this table can be foundhere

0. Extension
Definition

R5: OrganizationAffiliation.contact (new:ExtendedContactDetail)


Optional Extension Element - found in all resources.

ShortR5: Official contact details at the participatingOrganization relevant to this Affiliation (new)Optional Extensions Element
Comments

Element OrganizationAffiliation.contact is not mapped to FHIR STU3, since FHIR R5 OrganizationAffiliation is not mapped. Element OrganizationAffiliation.contact has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Control0..*
This element is affected by the following invariants: ele-1
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
2. Extension.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional Content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Alternate Namesextensions, user content
SlicingThis element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 4. Extension.extension:_datatype
    Slice Name_datatype
    Definition

    Slice to indicate the presence of a R5 ExtendedContactDetail in FHIR STU3

    ShortDataType slice for a FHIR R5 `ExtendedContactDetail` valueAdditional Content defined by implementations
    Control10..1*
    TypeExtension
    6. Extension.extension:_datatype.url
    Definition

    Source of the definition for the extension code - a logical name or a URL.

    Shortidentifies the meaning of the extension
    Comments

    The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

    Control1..1
    Typeuri
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    XML FormatIn the XML format, this property is represented as an attribute.
    Fixed Valuehttp://hl7.org/fhir/StructureDefinition/_datatype
    8. Extension.extension:_datatype.value[x]
    Definition

    Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).

    ShortValue of extension
    Comments

    Must be: ExtendedContactDetail

    Control10..1
    Typestring, date, dateTime, Meta, code, Address, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Quantity, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal, CodeableConcept
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Fixed ValueExtendedContactDetail
    10. Extension.extension:purpose
    Slice Namepurpose
    Definition

    R5: ExtendedContactDetail.purpose (new:CodeableConcept)

    ShortR5: The type of contact (new)Additional Content defined by implementations
    Comments

    Element ExtendedContactDetail.purpose is not mapped to FHIR STU3, since FHIR R5 ExtendedContactDetail is not mapped. Element ExtendedContactDetail.purpose has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). If no purpose is defined, then these contact details may be used for any purpose.

    Control0..1*
    TypeExtension
    Requirements

    Element ExtendedContactDetail.purpose is not mapped to FHIR STU3, since FHIR R5 ExtendedContactDetail is not mapped. Element ExtendedContactDetail.purpose has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    12. Extension.extension:purpose.url
    Definition

    Source of the definition for the extension code - a logical name or a URL.

    Shortidentifies the meaning of the extension
    Comments

    The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

    Control1..1
    Typeuri
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    XML FormatIn the XML format, this property is represented as an attribute.
    Fixed Valuepurpose
    14. Extension.extension:purpose.value[x]
    Definition

    The purpose/type of contact.


    Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).

    ShortThe type of contactValue of extension
    Comments

    If no purpose is defined, then these contact details may be used for any purpose.

    Control0..1
    BindingThe codes SHOULD be taken from For codes, see ContactEntityType
    (preferred to http://hl7.org/fhir/ValueSet/contactentity-type|3.0.2)

    The purpose for which an extended contact detail should be used.

    TypeCodeableConcept, date, dateTime, Meta, code, string, Address, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Quantity, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    16. Extension.extension:name
    Slice Namename
    Definition

    R5: ExtendedContactDetail.name (new:HumanName)

    ShortR5: Name of an individual to contact (new)Additional Content defined by implementations
    Comments

    Element ExtendedContactDetail.name is not mapped to FHIR STU3, since FHIR R5 ExtendedContactDetail is not mapped. Element ExtendedContactDetail.name has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). If there is no named individual, the telecom/address information is not generally monitored by a specific individual.

    Control0..*
    TypeExtension
    Requirements

    Element ExtendedContactDetail.name is not mapped to FHIR STU3, since FHIR R5 ExtendedContactDetail is not mapped. Element ExtendedContactDetail.name has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    18. Extension.extension:name.url
    Definition

    Source of the definition for the extension code - a logical name or a URL.

    Shortidentifies the meaning of the extension
    Comments

    The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

    Control1..1
    Typeuri
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    XML FormatIn the XML format, this property is represented as an attribute.
    Fixed Valuename
    20. Extension.extension:name.value[x]
    Definition

    The name of an individual to contact, some types of contact detail are usually blank.


    Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).

    ShortName of an individual to contactValue of extension
    Comments

    If there is no named individual, the telecom/address information is not generally monitored by a specific individual.

    Control0..1
    TypeHumanName, date, dateTime, Meta, code, string, Address, Attachment, integer, oid, Count, instant, ContactPoint, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Quantity, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal, CodeableConcept
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    22. Extension.extension:telecom
    Slice Nametelecom
    Definition

    R5: ExtendedContactDetail.telecom (new:ContactPoint)

    ShortR5: Contact details (e.g.phone/fax/url) (new)Additional Content defined by implementations
    Comments

    Element ExtendedContactDetail.telecom is not mapped to FHIR STU3, since FHIR R5 ExtendedContactDetail is not mapped. Element ExtendedContactDetail.telecom has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..*
    TypeExtension
    Requirements

    Element ExtendedContactDetail.telecom is not mapped to FHIR STU3, since FHIR R5 ExtendedContactDetail is not mapped. Element ExtendedContactDetail.telecom has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    24. Extension.extension:telecom.url
    Definition

    Source of the definition for the extension code - a logical name or a URL.

    Shortidentifies the meaning of the extension
    Comments

    The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

    Control1..1
    Typeuri
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    XML FormatIn the XML format, this property is represented as an attribute.
    Fixed Valuetelecom
    26. Extension.extension:telecom.value[x]
    Definition

    The contact details application for the purpose defined.


    Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).

    ShortContact details (e.g.phone/fax/url)Value of extension
    Control0..1
    TypeContactPoint, date, dateTime, Meta, code, string, Address, Attachment, integer, oid, Count, instant, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Quantity, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal, CodeableConcept
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    28. Extension.extension:address
    Slice Nameaddress
    Definition

    R5: ExtendedContactDetail.address (new:Address)

    ShortR5: Address for the contact (new)Additional Content defined by implementations
    Comments

    Element ExtendedContactDetail.address is not mapped to FHIR STU3, since FHIR R5 ExtendedContactDetail is not mapped. Element ExtendedContactDetail.address has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). More than 1 address would be for different purposes, and thus should be entered as a different entry,.

    Control0..1*
    TypeExtension
    Requirements

    Element ExtendedContactDetail.address is not mapped to FHIR STU3, since FHIR R5 ExtendedContactDetail is not mapped. Element ExtendedContactDetail.address has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    30. Extension.extension:address.url
    Definition

    Source of the definition for the extension code - a logical name or a URL.

    Shortidentifies the meaning of the extension
    Comments

    The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

    Control1..1
    Typeuri
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    XML FormatIn the XML format, this property is represented as an attribute.
    Fixed Valueaddress
    32. Extension.extension:address.value[x]
    Definition

    Address for the contact.


    Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).

    ShortAddress for the contactValue of extension
    Comments

    More than 1 address would be for different purposes, and thus should be entered as a different entry,.

    Control0..1
    TypeAddress, date, dateTime, Meta, code, string, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Quantity, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal, CodeableConcept
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    34. Extension.extension:organization
    Slice Nameorganization
    Definition

    R5: ExtendedContactDetail.organization (new:Reference(Organization))

    ShortR5: This contact detail is handled/monitored by a specific organization (new)Additional Content defined by implementations
    Comments

    Element ExtendedContactDetail.organization is not mapped to FHIR STU3, since FHIR R5 ExtendedContactDetail is not mapped. Element ExtendedContactDetail.organization has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..1*
    TypeExtension
    Requirements

    Some specific types of contact information can be an handled by an organization (eg legal council is via a specific firm). Element ExtendedContactDetail.organization is not mapped to FHIR STU3, since FHIR R5 ExtendedContactDetail is not mapped. Element ExtendedContactDetail.organization has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    36. Extension.extension:organization.url
    Definition

    Source of the definition for the extension code - a logical name or a URL.

    Shortidentifies the meaning of the extension
    Comments

    The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

    Control1..1
    Typeuri
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    XML FormatIn the XML format, this property is represented as an attribute.
    Fixed Valueorganization
    38. Extension.extension:organization.value[x]
    Definition

    This contact detail is handled/monitored by a specific organization. If the name is provided in the contact, then it is referring to the named individual within this organization.


    Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).

    ShortThis contact detail is handled/monitored by a specific organizationValue of extension
    Control0..1
    TypeReference(Cross-version Profile for R5.Organization for use in FHIR STU3, Organization), date, dateTime, Meta, code, string, Address, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Period, Quantity, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal, CodeableConcept
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    40. Extension.extension:period
    Slice Nameperiod
    Definition

    R5: ExtendedContactDetail.period (new:Period)

    ShortR5: Period that this contact was valid for usage (new)Additional Content defined by implementations
    Comments

    Element ExtendedContactDetail.period is not mapped to FHIR STU3, since FHIR R5 ExtendedContactDetail is not mapped. Element ExtendedContactDetail.period has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). If the details have multiple periods, then enter in a new ExtendedContact with the new period.

    Control0..1*
    TypeExtension
    Requirements

    Element ExtendedContactDetail.period is not mapped to FHIR STU3, since FHIR R5 ExtendedContactDetail is not mapped. Element ExtendedContactDetail.period has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    42. Extension.extension:period.url
    Definition

    Source of the definition for the extension code - a logical name or a URL.

    Shortidentifies the meaning of the extension
    Comments

    The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

    Control1..1
    Typeuri
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    XML FormatIn the XML format, this property is represented as an attribute.
    Fixed Valueperiod
    44. Extension.extension:period.value[x]
    Definition

    Period that this contact was valid for usage.


    Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).

    ShortPeriod that this contact was valid for usageValue of extension
    Comments

    If the details have multiple periods, then enter in a new ExtendedContact with the new period.

    Control0..1
    TypePeriod, date, dateTime, Meta, code, string, Address, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Quantity, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal, CodeableConcept
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    46. Extension.url
    Definition

    Source of the definition for the extension code - a logical name or a URL.

    Shortidentifies the meaning of the extension
    Comments

    The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

    Control1..1
    Typeuri
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    XML FormatIn the XML format, this property is represented as an attribute.
    Fixed Valuehttp://hl7.org/fhir/5.0/StructureDefinition/extension-OrganizationAffiliation.contact
    48. Extension.value[x]
    Definition

    Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).

    ShortValue of extension
    Control0..01
    TypeChoice of: base64Binary, boolean, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, Meta
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension

    Guidance on how to interpret the contents of this table can be foundhere

    0. Extension
    Definition

    R5: OrganizationAffiliation.contact (new:ExtendedContactDetail)

    ShortR5: Official contact details at the participatingOrganization relevant to this Affiliation (new)
    Comments

    Element OrganizationAffiliation.contact is not mapped to FHIR STU3, since FHIR R5 OrganizationAffiliation is not mapped. Element OrganizationAffiliation.contact has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..*
    Is Modifierfalse
    2. Extension.extension
    Control0..*
    SlicingThis element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • 4. Extension.extension:_datatype
      Slice Name_datatype
      Definition

      Slice to indicate the presence of a R5 ExtendedContactDetail in FHIR STU3

      ShortDataType slice for a FHIR R5 `ExtendedContactDetail` value
      Control1..1
      6. Extension.extension:_datatype.url
      Control1..1
      Fixed Valuehttp://hl7.org/fhir/StructureDefinition/_datatype
      8. Extension.extension:_datatype.value[x]
      Comments

      Must be: ExtendedContactDetail

      Control1..1
      Typestring
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Fixed ValueExtendedContactDetail
      10. Extension.extension:purpose
      Slice Namepurpose
      Definition

      R5: ExtendedContactDetail.purpose (new:CodeableConcept)

      ShortR5: The type of contact (new)
      Comments

      Element ExtendedContactDetail.purpose is not mapped to FHIR STU3, since FHIR R5 ExtendedContactDetail is not mapped. Element ExtendedContactDetail.purpose has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). If no purpose is defined, then these contact details may be used for any purpose.

      Control0..1
      Requirements

      Element ExtendedContactDetail.purpose is not mapped to FHIR STU3, since FHIR R5 ExtendedContactDetail is not mapped. Element ExtendedContactDetail.purpose has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      12. Extension.extension:purpose.url
      Control1..1
      Fixed Valuepurpose
      14. Extension.extension:purpose.value[x]
      Definition

      The purpose/type of contact.

      ShortThe type of contact
      Comments

      If no purpose is defined, then these contact details may be used for any purpose.

      Control0..1
      BindingThe codes SHOULD be taken from ContactEntityType
      (preferred to http://hl7.org/fhir/ValueSet/contactentity-type|3.0.2)

      The purpose for which an extended contact detail should be used.

      TypeCodeableConcept
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      16. Extension.extension:name
      Slice Namename
      Definition

      R5: ExtendedContactDetail.name (new:HumanName)

      ShortR5: Name of an individual to contact (new)
      Comments

      Element ExtendedContactDetail.name is not mapped to FHIR STU3, since FHIR R5 ExtendedContactDetail is not mapped. Element ExtendedContactDetail.name has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). If there is no named individual, the telecom/address information is not generally monitored by a specific individual.

      Control0..*
      Requirements

      Element ExtendedContactDetail.name is not mapped to FHIR STU3, since FHIR R5 ExtendedContactDetail is not mapped. Element ExtendedContactDetail.name has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      18. Extension.extension:name.url
      Control1..1
      Fixed Valuename
      20. Extension.extension:name.value[x]
      Definition

      The name of an individual to contact, some types of contact detail are usually blank.

      ShortName of an individual to contact
      Comments

      If there is no named individual, the telecom/address information is not generally monitored by a specific individual.

      Control0..1
      TypeHumanName
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      22. Extension.extension:telecom
      Slice Nametelecom
      Definition

      R5: ExtendedContactDetail.telecom (new:ContactPoint)

      ShortR5: Contact details (e.g.phone/fax/url) (new)
      Comments

      Element ExtendedContactDetail.telecom is not mapped to FHIR STU3, since FHIR R5 ExtendedContactDetail is not mapped. Element ExtendedContactDetail.telecom has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      Control0..*
      Requirements

      Element ExtendedContactDetail.telecom is not mapped to FHIR STU3, since FHIR R5 ExtendedContactDetail is not mapped. Element ExtendedContactDetail.telecom has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      24. Extension.extension:telecom.url
      Control1..1
      Fixed Valuetelecom
      26. Extension.extension:telecom.value[x]
      Definition

      The contact details application for the purpose defined.

      ShortContact details (e.g.phone/fax/url)
      Control0..1
      TypeContactPoint
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      28. Extension.extension:address
      Slice Nameaddress
      Definition

      R5: ExtendedContactDetail.address (new:Address)

      ShortR5: Address for the contact (new)
      Comments

      Element ExtendedContactDetail.address is not mapped to FHIR STU3, since FHIR R5 ExtendedContactDetail is not mapped. Element ExtendedContactDetail.address has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). More than 1 address would be for different purposes, and thus should be entered as a different entry,.

      Control0..1
      Requirements

      Element ExtendedContactDetail.address is not mapped to FHIR STU3, since FHIR R5 ExtendedContactDetail is not mapped. Element ExtendedContactDetail.address has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      30. Extension.extension:address.url
      Control1..1
      Fixed Valueaddress
      32. Extension.extension:address.value[x]
      Definition

      Address for the contact.

      ShortAddress for the contact
      Comments

      More than 1 address would be for different purposes, and thus should be entered as a different entry,.

      Control0..1
      TypeAddress
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      34. Extension.extension:organization
      Slice Nameorganization
      Definition

      R5: ExtendedContactDetail.organization (new:Reference(Organization))

      ShortR5: This contact detail is handled/monitored by a specific organization (new)
      Comments

      Element ExtendedContactDetail.organization is not mapped to FHIR STU3, since FHIR R5 ExtendedContactDetail is not mapped. Element ExtendedContactDetail.organization has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      Control0..1
      Requirements

      Some specific types of contact information can be an handled by an organization (eg legal council is via a specific firm). Element ExtendedContactDetail.organization is not mapped to FHIR STU3, since FHIR R5 ExtendedContactDetail is not mapped. Element ExtendedContactDetail.organization has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      36. Extension.extension:organization.url
      Control1..1
      Fixed Valueorganization
      38. Extension.extension:organization.value[x]
      Definition

      This contact detail is handled/monitored by a specific organization. If the name is provided in the contact, then it is referring to the named individual within this organization.

      ShortThis contact detail is handled/monitored by a specific organization
      Control0..1
      TypeReference(Cross-version Profile for R5.Organization for use in FHIR STU3, Organization)
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      40. Extension.extension:period
      Slice Nameperiod
      Definition

      R5: ExtendedContactDetail.period (new:Period)

      ShortR5: Period that this contact was valid for usage (new)
      Comments

      Element ExtendedContactDetail.period is not mapped to FHIR STU3, since FHIR R5 ExtendedContactDetail is not mapped. Element ExtendedContactDetail.period has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). If the details have multiple periods, then enter in a new ExtendedContact with the new period.

      Control0..1
      Requirements

      Element ExtendedContactDetail.period is not mapped to FHIR STU3, since FHIR R5 ExtendedContactDetail is not mapped. Element ExtendedContactDetail.period has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      42. Extension.extension:period.url
      Control1..1
      Fixed Valueperiod
      44. Extension.extension:period.value[x]
      Definition

      Period that this contact was valid for usage.

      ShortPeriod that this contact was valid for usage
      Comments

      If the details have multiple periods, then enter in a new ExtendedContact with the new period.

      Control0..1
      TypePeriod
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      46. Extension.url
      Control1..1
      Fixed Valuehttp://hl7.org/fhir/5.0/StructureDefinition/extension-OrganizationAffiliation.contact
      48. Extension.value[x]
      Control0..0

      Guidance on how to interpret the contents of this table can be foundhere

      0. Extension
      Definition

      R5: OrganizationAffiliation.contact (new:ExtendedContactDetail)

      ShortR5: Official contact details at the participatingOrganization relevant to this Affiliation (new)
      Comments

      Element OrganizationAffiliation.contact is not mapped to FHIR STU3, since FHIR R5 OrganizationAffiliation is not mapped. Element OrganizationAffiliation.contact has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      Control0..*
      This element is affected by the following invariants: ele-1
      Is Modifierfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      2. Extension.id
      Definition

      unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

      Shortxml:id (or equivalent in JSON)
      Control0..1
      Typestring
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      XML FormatIn the XML format, this property is represented as an attribute.
      4. Extension.extension
      Definition

      An Extension

      ShortExtension
      Control0..*
      TypeExtension
      SlicingThis element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 6. Extension.extension:_datatype
        Slice Name_datatype
        Definition

        Slice to indicate the presence of a R5 ExtendedContactDetail in FHIR STU3

        ShortDataType slice for a FHIR R5 `ExtendedContactDetail` value
        Control1..1
        TypeExtension
        8. Extension.extension:_datatype.id
        Definition

        unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        Shortxml:id (or equivalent in JSON)
        Control0..1
        Typestring
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        XML FormatIn the XML format, this property is represented as an attribute.
        10. Extension.extension:_datatype.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional Content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Alternate Namesextensions, user content
        SlicingThis element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 12. Extension.extension:_datatype.url
          Definition

          Source of the definition for the extension code - a logical name or a URL.

          Shortidentifies the meaning of the extension
          Comments

          The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

          Control1..1
          Typeuri
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          XML FormatIn the XML format, this property is represented as an attribute.
          Fixed Valuehttp://hl7.org/fhir/StructureDefinition/_datatype
          14. Extension.extension:_datatype.value[x]
          Definition

          Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).

          ShortValue of extension
          Comments

          Must be: ExtendedContactDetail

          Control1..1
          Typestring
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Fixed ValueExtendedContactDetail
          16. Extension.extension:purpose
          Slice Namepurpose
          Definition

          R5: ExtendedContactDetail.purpose (new:CodeableConcept)

          ShortR5: The type of contact (new)
          Comments

          Element ExtendedContactDetail.purpose is not mapped to FHIR STU3, since FHIR R5 ExtendedContactDetail is not mapped. Element ExtendedContactDetail.purpose has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). If no purpose is defined, then these contact details may be used for any purpose.

          Control0..1
          TypeExtension
          Requirements

          Element ExtendedContactDetail.purpose is not mapped to FHIR STU3, since FHIR R5 ExtendedContactDetail is not mapped. Element ExtendedContactDetail.purpose has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

          18. Extension.extension:purpose.id
          Definition

          unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          Shortxml:id (or equivalent in JSON)
          Control0..1
          Typestring
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          XML FormatIn the XML format, this property is represented as an attribute.
          20. Extension.extension:purpose.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional Content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Alternate Namesextensions, user content
          SlicingThis element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ url
          • 22. Extension.extension:purpose.url
            Definition

            Source of the definition for the extension code - a logical name or a URL.

            Shortidentifies the meaning of the extension
            Comments

            The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

            Control1..1
            Typeuri
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            XML FormatIn the XML format, this property is represented as an attribute.
            Fixed Valuepurpose
            24. Extension.extension:purpose.value[x]
            Definition

            The purpose/type of contact.

            ShortThe type of contact
            Comments

            If no purpose is defined, then these contact details may be used for any purpose.

            Control0..1
            BindingThe codes SHOULD be taken from ContactEntityType
            (preferred to http://hl7.org/fhir/ValueSet/contactentity-type|3.0.2)

            The purpose for which an extended contact detail should be used.

            TypeCodeableConcept
            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
            26. Extension.extension:name
            Slice Namename
            Definition

            R5: ExtendedContactDetail.name (new:HumanName)

            ShortR5: Name of an individual to contact (new)
            Comments

            Element ExtendedContactDetail.name is not mapped to FHIR STU3, since FHIR R5 ExtendedContactDetail is not mapped. Element ExtendedContactDetail.name has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). If there is no named individual, the telecom/address information is not generally monitored by a specific individual.

            Control0..*
            TypeExtension
            Requirements

            Element ExtendedContactDetail.name is not mapped to FHIR STU3, since FHIR R5 ExtendedContactDetail is not mapped. Element ExtendedContactDetail.name has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

            28. Extension.extension:name.id
            Definition

            unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            Shortxml:id (or equivalent in JSON)
            Control0..1
            Typestring
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            XML FormatIn the XML format, this property is represented as an attribute.
            30. Extension.extension:name.extension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            ShortAdditional Content defined by implementations
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Alternate Namesextensions, user content
            SlicingThis element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • value @ url
            • 32. Extension.extension:name.url
              Definition

              Source of the definition for the extension code - a logical name or a URL.

              Shortidentifies the meaning of the extension
              Comments

              The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

              Control1..1
              Typeuri
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              XML FormatIn the XML format, this property is represented as an attribute.
              Fixed Valuename
              34. Extension.extension:name.value[x]
              Definition

              The name of an individual to contact, some types of contact detail are usually blank.

              ShortName of an individual to contact
              Comments

              If there is no named individual, the telecom/address information is not generally monitored by a specific individual.

              Control0..1
              TypeHumanName
              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
              36. Extension.extension:telecom
              Slice Nametelecom
              Definition

              R5: ExtendedContactDetail.telecom (new:ContactPoint)

              ShortR5: Contact details (e.g.phone/fax/url) (new)
              Comments

              Element ExtendedContactDetail.telecom is not mapped to FHIR STU3, since FHIR R5 ExtendedContactDetail is not mapped. Element ExtendedContactDetail.telecom has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

              Control0..*
              TypeExtension
              Requirements

              Element ExtendedContactDetail.telecom is not mapped to FHIR STU3, since FHIR R5 ExtendedContactDetail is not mapped. Element ExtendedContactDetail.telecom has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

              38. Extension.extension:telecom.id
              Definition

              unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              Shortxml:id (or equivalent in JSON)
              Control0..1
              Typestring
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              XML FormatIn the XML format, this property is represented as an attribute.
              40. Extension.extension:telecom.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional Content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Alternate Namesextensions, user content
              SlicingThis element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
              • value @ url
              • 42. Extension.extension:telecom.url
                Definition

                Source of the definition for the extension code - a logical name or a URL.

                Shortidentifies the meaning of the extension
                Comments

                The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

                Control1..1
                Typeuri
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                XML FormatIn the XML format, this property is represented as an attribute.
                Fixed Valuetelecom
                44. Extension.extension:telecom.value[x]
                Definition

                The contact details application for the purpose defined.

                ShortContact details (e.g.phone/fax/url)
                Control0..1
                TypeContactPoint
                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                46. Extension.extension:address
                Slice Nameaddress
                Definition

                R5: ExtendedContactDetail.address (new:Address)

                ShortR5: Address for the contact (new)
                Comments

                Element ExtendedContactDetail.address is not mapped to FHIR STU3, since FHIR R5 ExtendedContactDetail is not mapped. Element ExtendedContactDetail.address has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). More than 1 address would be for different purposes, and thus should be entered as a different entry,.

                Control0..1
                TypeExtension
                Requirements

                Element ExtendedContactDetail.address is not mapped to FHIR STU3, since FHIR R5 ExtendedContactDetail is not mapped. Element ExtendedContactDetail.address has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

                48. Extension.extension:address.id
                Definition

                unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                Shortxml:id (or equivalent in JSON)
                Control0..1
                Typestring
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                XML FormatIn the XML format, this property is represented as an attribute.
                50. Extension.extension:address.extension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                ShortAdditional Content defined by implementations
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Alternate Namesextensions, user content
                SlicingThis element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                • value @ url
                • 52. Extension.extension:address.url
                  Definition

                  Source of the definition for the extension code - a logical name or a URL.

                  Shortidentifies the meaning of the extension
                  Comments

                  The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

                  Control1..1
                  Typeuri
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  XML FormatIn the XML format, this property is represented as an attribute.
                  Fixed Valueaddress
                  54. Extension.extension:address.value[x]
                  Definition

                  Address for the contact.

                  ShortAddress for the contact
                  Comments

                  More than 1 address would be for different purposes, and thus should be entered as a different entry,.

                  Control0..1
                  TypeAddress
                  [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                  56. Extension.extension:organization
                  Slice Nameorganization
                  Definition

                  R5: ExtendedContactDetail.organization (new:Reference(Organization))

                  ShortR5: This contact detail is handled/monitored by a specific organization (new)
                  Comments

                  Element ExtendedContactDetail.organization is not mapped to FHIR STU3, since FHIR R5 ExtendedContactDetail is not mapped. Element ExtendedContactDetail.organization has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

                  Control0..1
                  TypeExtension
                  Requirements

                  Some specific types of contact information can be an handled by an organization (eg legal council is via a specific firm). Element ExtendedContactDetail.organization is not mapped to FHIR STU3, since FHIR R5 ExtendedContactDetail is not mapped. Element ExtendedContactDetail.organization has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

                  58. Extension.extension:organization.id
                  Definition

                  unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                  Shortxml:id (or equivalent in JSON)
                  Control0..1
                  Typestring
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  XML FormatIn the XML format, this property is represented as an attribute.
                  60. Extension.extension:organization.extension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                  ShortAdditional Content defined by implementations
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Alternate Namesextensions, user content
                  SlicingThis element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                  • value @ url
                  • 62. Extension.extension:organization.url
                    Definition

                    Source of the definition for the extension code - a logical name or a URL.

                    Shortidentifies the meaning of the extension
                    Comments

                    The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

                    Control1..1
                    Typeuri
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    XML FormatIn the XML format, this property is represented as an attribute.
                    Fixed Valueorganization
                    64. Extension.extension:organization.value[x]
                    Definition

                    This contact detail is handled/monitored by a specific organization. If the name is provided in the contact, then it is referring to the named individual within this organization.

                    ShortThis contact detail is handled/monitored by a specific organization
                    Control0..1
                    TypeReference(Cross-version Profile for R5.Organization for use in FHIR STU3, Organization)
                    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                    66. Extension.extension:period
                    Slice Nameperiod
                    Definition

                    R5: ExtendedContactDetail.period (new:Period)

                    ShortR5: Period that this contact was valid for usage (new)
                    Comments

                    Element ExtendedContactDetail.period is not mapped to FHIR STU3, since FHIR R5 ExtendedContactDetail is not mapped. Element ExtendedContactDetail.period has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). If the details have multiple periods, then enter in a new ExtendedContact with the new period.

                    Control0..1
                    TypeExtension
                    Requirements

                    Element ExtendedContactDetail.period is not mapped to FHIR STU3, since FHIR R5 ExtendedContactDetail is not mapped. Element ExtendedContactDetail.period has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

                    68. Extension.extension:period.id
                    Definition

                    unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                    Shortxml:id (or equivalent in JSON)
                    Control0..1
                    Typestring
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    XML FormatIn the XML format, this property is represented as an attribute.
                    70. Extension.extension:period.extension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                    ShortAdditional Content defined by implementations
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Alternate Namesextensions, user content
                    SlicingThis element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                    • value @ url
                    • 72. Extension.extension:period.url
                      Definition

                      Source of the definition for the extension code - a logical name or a URL.

                      Shortidentifies the meaning of the extension
                      Comments

                      The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

                      Control1..1
                      Typeuri
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      XML FormatIn the XML format, this property is represented as an attribute.
                      Fixed Valueperiod
                      74. Extension.extension:period.value[x]
                      Definition

                      Period that this contact was valid for usage.

                      ShortPeriod that this contact was valid for usage
                      Comments

                      If the details have multiple periods, then enter in a new ExtendedContact with the new period.

                      Control0..1
                      TypePeriod
                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                      76. Extension.url
                      Definition

                      Source of the definition for the extension code - a logical name or a URL.

                      Shortidentifies the meaning of the extension
                      Comments

                      The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

                      Control1..1
                      Typeuri
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      XML FormatIn the XML format, this property is represented as an attribute.
                      Fixed Valuehttp://hl7.org/fhir/5.0/StructureDefinition/extension-OrganizationAffiliation.contact
                      78. Extension.value[x]
                      Definition

                      Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).

                      ShortValue of extension
                      Control0..0
                      TypeChoice of: base64Binary, boolean, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, Meta
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension