Extensions for Using Data Elements from FHIR R5 in FHIR STU3
0.1.0 - STU International flag

Extensions for Using Data Elements from FHIR R5 in FHIR STU3 - Downloaded Version null See the Directory of published versions

Extension: ExtensionInventoryItem_ResponsibleOrganization - Detailed Descriptions

Page standards status: Trial-use Maturity Level: 0

Definitions for the ext-R5-InventoryItem.responsibleOrganization extension.

Guidance on how to interpret the contents of this table can be foundhere

0. Extension
Definition

R5: InventoryItem.responsibleOrganization (new:BackboneElement)


Optional Extension Element - found in all resources.

ShortR5: Organization(s) responsible for the product (new)Optional Extensions Element
Comments

Element InventoryItem.responsibleOrganization is not mapped to FHIR STU3, since FHIR R5 InventoryItem is not mapped. Element InventoryItem.responsibleOrganization has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Control0..*
This element is affected by the following invariants: ele-1
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
2. Extension.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional Content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control20..*
TypeExtension
Alternate Namesextensions, user content
SlicingThis element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 4. Extension.extension:role
    Slice Namerole
    Definition

    R5: InventoryItem.responsibleOrganization.role (new:CodeableConcept)

    ShortR5: The role of the organization e.g. manufacturer, distributor, or other (new)Additional Content defined by implementations
    Comments

    Element InventoryItem.responsibleOrganization.role is part of an existing definition because parent element InventoryItem.responsibleOrganization requires a cross-version extension. Element InventoryItem.responsibleOrganization.role is not mapped to FHIR STU3, since FHIR R5 InventoryItem is not mapped. Element InventoryItem.responsibleOrganization.role has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control10..1*
    TypeExtension
    Requirements

    Element InventoryItem.responsibleOrganization.role is part of an existing definition because parent element InventoryItem.responsibleOrganization requires a cross-version extension. Element InventoryItem.responsibleOrganization.role is not mapped to FHIR STU3, since FHIR R5 InventoryItem is not mapped. Element InventoryItem.responsibleOrganization.role has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    6. Extension.extension:role.url
    Definition

    Source of the definition for the extension code - a logical name or a URL.

    Shortidentifies the meaning of the extension
    Comments

    The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

    Control1..1
    Typeuri
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    XML FormatIn the XML format, this property is represented as an attribute.
    Fixed Valuerole
    8. Extension.extension:role.value[x]
    Definition

    The role of the organization e.g. manufacturer, distributor, etc.


    Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).

    ShortThe role of the organization e.g. manufacturer, distributor, or otherValue of extension
    Control10..1
    TypeCodeableConcept, date, dateTime, Meta, code, string, Address, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Quantity, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    10. Extension.extension:organization
    Slice Nameorganization
    Definition

    R5: InventoryItem.responsibleOrganization.organization (new:Reference(Organization))

    ShortR5: An organization that is associated with the item (new)Additional Content defined by implementations
    Comments

    Element InventoryItem.responsibleOrganization.organization is part of an existing definition because parent element InventoryItem.responsibleOrganization requires a cross-version extension. Element InventoryItem.responsibleOrganization.organization is not mapped to FHIR STU3, since FHIR R5 InventoryItem is not mapped. Element InventoryItem.responsibleOrganization.organization has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control10..1*
    TypeExtension
    Requirements

    Element InventoryItem.responsibleOrganization.organization is part of an existing definition because parent element InventoryItem.responsibleOrganization requires a cross-version extension. Element InventoryItem.responsibleOrganization.organization is not mapped to FHIR STU3, since FHIR R5 InventoryItem is not mapped. Element InventoryItem.responsibleOrganization.organization has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    12. Extension.extension:organization.url
    Definition

    Source of the definition for the extension code - a logical name or a URL.

    Shortidentifies the meaning of the extension
    Comments

    The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

    Control1..1
    Typeuri
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    XML FormatIn the XML format, this property is represented as an attribute.
    Fixed Valueorganization
    14. Extension.extension:organization.value[x]
    Definition

    An organization that has an association with the item, e.g. manufacturer, distributor, responsible, etc.


    Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).

    ShortAn organization that is associated with the itemValue of extension
    Control10..1
    TypeReference(Cross-version Profile for R5.Organization for use in FHIR STU3, Organization), date, dateTime, Meta, code, string, Address, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Period, Quantity, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal, CodeableConcept
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    16. Extension.url
    Definition

    Source of the definition for the extension code - a logical name or a URL.

    Shortidentifies the meaning of the extension
    Comments

    The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

    Control1..1
    Typeuri
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    XML FormatIn the XML format, this property is represented as an attribute.
    Fixed Valuehttp://hl7.org/fhir/5.0/StructureDefinition/extension-InventoryItem.responsibleOrganization
    18. Extension.value[x]
    Definition

    Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).

    ShortValue of extension
    Control0..01
    TypeChoice of: base64Binary, boolean, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, Meta
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension

    Guidance on how to interpret the contents of this table can be foundhere

    0. Extension
    Definition

    R5: InventoryItem.responsibleOrganization (new:BackboneElement)

    ShortR5: Organization(s) responsible for the product (new)
    Comments

    Element InventoryItem.responsibleOrganization is not mapped to FHIR STU3, since FHIR R5 InventoryItem is not mapped. Element InventoryItem.responsibleOrganization has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..*
    Is Modifierfalse
    2. Extension.extension
    Control2..*
    SlicingThis element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • 4. Extension.extension:role
      Slice Namerole
      Definition

      R5: InventoryItem.responsibleOrganization.role (new:CodeableConcept)

      ShortR5: The role of the organization e.g. manufacturer, distributor, or other (new)
      Comments

      Element InventoryItem.responsibleOrganization.role is part of an existing definition because parent element InventoryItem.responsibleOrganization requires a cross-version extension. Element InventoryItem.responsibleOrganization.role is not mapped to FHIR STU3, since FHIR R5 InventoryItem is not mapped. Element InventoryItem.responsibleOrganization.role has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      Control1..1
      Requirements

      Element InventoryItem.responsibleOrganization.role is part of an existing definition because parent element InventoryItem.responsibleOrganization requires a cross-version extension. Element InventoryItem.responsibleOrganization.role is not mapped to FHIR STU3, since FHIR R5 InventoryItem is not mapped. Element InventoryItem.responsibleOrganization.role has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      6. Extension.extension:role.url
      Control1..1
      Fixed Valuerole
      8. Extension.extension:role.value[x]
      Definition

      The role of the organization e.g. manufacturer, distributor, etc.

      ShortThe role of the organization e.g. manufacturer, distributor, or other
      Control1..1
      TypeCodeableConcept
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      10. Extension.extension:organization
      Slice Nameorganization
      Definition

      R5: InventoryItem.responsibleOrganization.organization (new:Reference(Organization))

      ShortR5: An organization that is associated with the item (new)
      Comments

      Element InventoryItem.responsibleOrganization.organization is part of an existing definition because parent element InventoryItem.responsibleOrganization requires a cross-version extension. Element InventoryItem.responsibleOrganization.organization is not mapped to FHIR STU3, since FHIR R5 InventoryItem is not mapped. Element InventoryItem.responsibleOrganization.organization has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      Control1..1
      Requirements

      Element InventoryItem.responsibleOrganization.organization is part of an existing definition because parent element InventoryItem.responsibleOrganization requires a cross-version extension. Element InventoryItem.responsibleOrganization.organization is not mapped to FHIR STU3, since FHIR R5 InventoryItem is not mapped. Element InventoryItem.responsibleOrganization.organization has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      12. Extension.extension:organization.url
      Control1..1
      Fixed Valueorganization
      14. Extension.extension:organization.value[x]
      Definition

      An organization that has an association with the item, e.g. manufacturer, distributor, responsible, etc.

      ShortAn organization that is associated with the item
      Control1..1
      TypeReference(Cross-version Profile for R5.Organization for use in FHIR STU3, Organization)
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      16. Extension.url
      Control1..1
      Fixed Valuehttp://hl7.org/fhir/5.0/StructureDefinition/extension-InventoryItem.responsibleOrganization
      18. Extension.value[x]
      Control0..0

      Guidance on how to interpret the contents of this table can be foundhere

      0. Extension
      Definition

      R5: InventoryItem.responsibleOrganization (new:BackboneElement)

      ShortR5: Organization(s) responsible for the product (new)
      Comments

      Element InventoryItem.responsibleOrganization is not mapped to FHIR STU3, since FHIR R5 InventoryItem is not mapped. Element InventoryItem.responsibleOrganization has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      Control0..*
      This element is affected by the following invariants: ele-1
      Is Modifierfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      2. Extension.id
      Definition

      unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

      Shortxml:id (or equivalent in JSON)
      Control0..1
      Typestring
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      XML FormatIn the XML format, this property is represented as an attribute.
      4. Extension.extension
      Definition

      An Extension

      ShortExtension
      Control2..*
      TypeExtension
      SlicingThis element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 6. Extension.extension:role
        Slice Namerole
        Definition

        R5: InventoryItem.responsibleOrganization.role (new:CodeableConcept)

        ShortR5: The role of the organization e.g. manufacturer, distributor, or other (new)
        Comments

        Element InventoryItem.responsibleOrganization.role is part of an existing definition because parent element InventoryItem.responsibleOrganization requires a cross-version extension. Element InventoryItem.responsibleOrganization.role is not mapped to FHIR STU3, since FHIR R5 InventoryItem is not mapped. Element InventoryItem.responsibleOrganization.role has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control1..1
        TypeExtension
        Requirements

        Element InventoryItem.responsibleOrganization.role is part of an existing definition because parent element InventoryItem.responsibleOrganization requires a cross-version extension. Element InventoryItem.responsibleOrganization.role is not mapped to FHIR STU3, since FHIR R5 InventoryItem is not mapped. Element InventoryItem.responsibleOrganization.role has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        8. Extension.extension:role.id
        Definition

        unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        Shortxml:id (or equivalent in JSON)
        Control0..1
        Typestring
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        XML FormatIn the XML format, this property is represented as an attribute.
        10. Extension.extension:role.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional Content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Alternate Namesextensions, user content
        SlicingThis element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 12. Extension.extension:role.url
          Definition

          Source of the definition for the extension code - a logical name or a URL.

          Shortidentifies the meaning of the extension
          Comments

          The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

          Control1..1
          Typeuri
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          XML FormatIn the XML format, this property is represented as an attribute.
          Fixed Valuerole
          14. Extension.extension:role.value[x]
          Definition

          The role of the organization e.g. manufacturer, distributor, etc.

          ShortThe role of the organization e.g. manufacturer, distributor, or other
          Control1..1
          TypeCodeableConcept
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          16. Extension.extension:organization
          Slice Nameorganization
          Definition

          R5: InventoryItem.responsibleOrganization.organization (new:Reference(Organization))

          ShortR5: An organization that is associated with the item (new)
          Comments

          Element InventoryItem.responsibleOrganization.organization is part of an existing definition because parent element InventoryItem.responsibleOrganization requires a cross-version extension. Element InventoryItem.responsibleOrganization.organization is not mapped to FHIR STU3, since FHIR R5 InventoryItem is not mapped. Element InventoryItem.responsibleOrganization.organization has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

          Control1..1
          TypeExtension
          Requirements

          Element InventoryItem.responsibleOrganization.organization is part of an existing definition because parent element InventoryItem.responsibleOrganization requires a cross-version extension. Element InventoryItem.responsibleOrganization.organization is not mapped to FHIR STU3, since FHIR R5 InventoryItem is not mapped. Element InventoryItem.responsibleOrganization.organization has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

          18. Extension.extension:organization.id
          Definition

          unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          Shortxml:id (or equivalent in JSON)
          Control0..1
          Typestring
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          XML FormatIn the XML format, this property is represented as an attribute.
          20. Extension.extension:organization.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional Content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Alternate Namesextensions, user content
          SlicingThis element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ url
          • 22. Extension.extension:organization.url
            Definition

            Source of the definition for the extension code - a logical name or a URL.

            Shortidentifies the meaning of the extension
            Comments

            The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

            Control1..1
            Typeuri
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            XML FormatIn the XML format, this property is represented as an attribute.
            Fixed Valueorganization
            24. Extension.extension:organization.value[x]
            Definition

            An organization that has an association with the item, e.g. manufacturer, distributor, responsible, etc.

            ShortAn organization that is associated with the item
            Control1..1
            TypeReference(Cross-version Profile for R5.Organization for use in FHIR STU3, Organization)
            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
            26. Extension.url
            Definition

            Source of the definition for the extension code - a logical name or a URL.

            Shortidentifies the meaning of the extension
            Comments

            The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

            Control1..1
            Typeuri
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            XML FormatIn the XML format, this property is represented as an attribute.
            Fixed Valuehttp://hl7.org/fhir/5.0/StructureDefinition/extension-InventoryItem.responsibleOrganization
            28. Extension.value[x]
            Definition

            Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).

            ShortValue of extension
            Control0..0
            TypeChoice of: base64Binary, boolean, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, Meta
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension