<status value="active"/> <experimental value="false"/> <date value="2026-03-17T21:02:03.8104715+00:00"/> <publisher value="FHIR Infrastructure"/> <contact> <name value="FHIR Infrastructure"/> <telecom> <system value="url"/> <value value="http://www.hl7.org/Special/committees/fiwg"/> </telecom> </contact> <description value="R5: `HealthcareService.contact` (new:ExtendedContactDetail)"/> <jurisdiction> <coding> <system value="http://unstats.un.org/unsd/methods/m49/m49.htm"/> <code value="001"/> <display value="World"/> </coding> </jurisdiction> <purpose value="This extension is part of the cross-version definitions generated to enable use of the element `HealthcareService.contact` as defined in FHIR R5 in FHIR STU3. The source element is defined as: `HealthcareService.contact` 0..* `ExtendedContactDetail` Across FHIR versions, the element set has been mapped as: * R5: `HealthcareService.contact` 0..* `ExtendedContactDetail` Following are the generation technical comments: Element `HealthcareService.contact` has a context of HealthcareService based on following the parent source element upwards and mapping to `HealthcareService`. Element `HealthcareService.contact` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <fhirVersion value="3.0.2"/> <mapping> <identity value="rim"/> <uri value="http://hl7.org/v3"/> <name value="RIM Mapping"/> </mapping> <kind value="complex-type"/> <abstract value="false"/> <contextType value="resource"/> <context value="HealthcareService"/> <type value="Extension"/> <baseDefinition value="http://hl7.org/fhir/StructureDefinition/Extension"/> <derivation value="constraint"/> <snapshot> <element id="Extension"> <path value="Extension"/> <short value="R5: Official contact details for the HealthcareService (new)"/> <definition value="R5: `HealthcareService.contact` (new:ExtendedContactDetail)"/> <comment value="Element `HealthcareService.contact` has a context of HealthcareService based on following the parent source element upwards and mapping to `HealthcareService`. Element `HealthcareService.contact` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). The address/telecom use code 'home' are not to be used. Note that these contacts are not the contact details of people who provide the service (that would be through PractitionerRole), these are official contacts for the HealthcareService itself for specific purposes. E.g. Mailing Addresses, Billing Addresses, Contact numbers for Booking or Billing Enquiries, general web address, web address for online bookings etc. If this is empty (or the type of interest is empty), refer to the location's contacts."/> <min value="0"/> <max value="*"/> <base> <path value="Extension"/> <min value="0"/> <max value="*"/> </base> <condition value="ele-1"/> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() | (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <constraint> <key value="ext-1"/> <severity value="error"/> <human value="Must have either extensions or value[x], not both"/> <expression value="extension.exists() != value.exists()"/> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])"/> <source value="http://hl7.org/fhir/StructureDefinition/Extension"/> </constraint> <isModifier value="false"/> </element> <element id="Extension.id"> <path value="Extension.id"/> <representation value="xmlAttr"/> <short value="xml:id (or equivalent in JSON)"/> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension"> <path value="Extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <ordered value="false"/> <rules value="open"/> </slicing> <short value="Extension"/> <definition value="An Extension"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> </element> <element id="Extension.extension:_datatype"> <path value="Extension.extension"/> <sliceName value="_datatype"/> <short value="DataType slice for a FHIR R5 `ExtendedContactDetail` value"/> <definition value="Slice to indicate the presence of a R5 `ExtendedContactDetail` in FHIR STU3"/> <min value="1"/> <max value="1"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> </element> <element id="Extension.extension:_datatype.id"> <path value="Extension.extension.id"/> <representation value="xmlAttr"/> <short value="xml:id (or equivalent in JSON)"/> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:_datatype.extension"> <path value="Extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <rules value="open"/> </slicing> <short value="Additional Content defined by implementations"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:_datatype.url"> <path value="Extension.extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <code value="uri"/> </type> <fixedUri value="http://hl7.org/fhir/StructureDefinition/_datatype"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:_datatype.value[x]"> <path value="Extension.extension.value[x]"/> <short value="Value of extension"/> <definition value="Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list)."/> <comment value="Must be: ExtendedContactDetail"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <fixedString value="ExtendedContactDetail"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:purpose"> <path value="Extension.extension"/> <sliceName value="purpose"/> <short value="R5: The type of contact (new)"/> <definition value="R5: `ExtendedContactDetail.purpose` (new:CodeableConcept)"/> <comment value="Element `ExtendedContactDetail.purpose` is not mapped to FHIR STU3, since FHIR R5 `ExtendedContactDetail` is not mapped. Element `ExtendedContactDetail.purpose` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). If no purpose is defined, then these contact details may be used for any purpose."/> <requirements value="Element `ExtendedContactDetail.purpose` is not mapped to FHIR STU3, since FHIR R5 `ExtendedContactDetail` is not mapped. Element `ExtendedContactDetail.purpose` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="1"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> </element> <element id="Extension.extension:purpose.id"> <path value="Extension.extension.id"/> <representation value="xmlAttr"/> <short value="xml:id (or equivalent in JSON)"/> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:purpose.extension"> <path value="Extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <rules value="open"/> </slicing> <short value="Additional Content defined by implementations"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:purpose.url"> <path value="Extension.extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <code value="uri"/> </type> <fixedUri value="purpose"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:purpose.value[x]"> <path value="Extension.extension.value[x]"/> <short value="The type of contact"/> <definition value="The purpose/type of contact."/> <comment value="If no purpose is defined, then these contact details may be used for any purpose."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> <binding> <strength value="preferred"/> <description value="The purpose for which an extended contact detail should be used."/> <valueSetUri value="http://hl7.org/fhir/ValueSet/contactentity-type|3.0.2"/> </binding> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:name"> <path value="Extension.extension"/> <sliceName value="name"/> <short value="R5: Name of an individual to contact (new)"/> <definition value="R5: `ExtendedContactDetail.name` (new:HumanName)"/> <comment value="Element `ExtendedContactDetail.name` is not mapped to FHIR STU3, since FHIR R5 `ExtendedContactDetail` is not mapped. Element `ExtendedContactDetail.name` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). If there is no named individual, the telecom/address information is not generally monitored by a specific individual."/> <requirements value="Element `ExtendedContactDetail.name` is not mapped to FHIR STU3, since FHIR R5 `ExtendedContactDetail` is not mapped. Element `ExtendedContactDetail.name` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> </element> <element id="Extension.extension:name.id"> <path value="Extension.extension.id"/> <representation value="xmlAttr"/> <short value="xml:id (or equivalent in JSON)"/> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:name.extension"> <path value="Extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <rules value="open"/> </slicing> <short value="Additional Content defined by implementations"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:name.url"> <path value="Extension.extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <code value="uri"/> </type> <fixedUri value="name"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:name.value[x]"> <path value="Extension.extension.value[x]"/> <short value="Name of an individual to contact"/> <definition value="The name of an individual to contact, some types of contact detail are usually blank."/> <comment value="If there is no named individual, the telecom/address information is not generally monitored by a specific individual."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="HumanName"/> </type> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:telecom"> <path value="Extension.extension"/> <sliceName value="telecom"/> <short value="R5: Contact details (e.g.phone/fax/url) (new)"/> <definition value="R5: `ExtendedContactDetail.telecom` (new:ContactPoint)"/> <comment value="Element `ExtendedContactDetail.telecom` is not mapped to FHIR STU3, since FHIR R5 `ExtendedContactDetail` is not mapped. Element `ExtendedContactDetail.telecom` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `ExtendedContactDetail.telecom` is not mapped to FHIR STU3, since FHIR R5 `ExtendedContactDetail` is not mapped. Element `ExtendedContactDetail.telecom` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> </element> <element id="Extension.extension:telecom.id"> <path value="Extension.extension.id"/> <representation value="xmlAttr"/> <short value="xml:id (or equivalent in JSON)"/> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:telecom.extension"> <path value="Extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <rules value="open"/> </slicing> <short value="Additional Content defined by implementations"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:telecom.url"> <path value="Extension.extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <code value="uri"/> </type> <fixedUri value="telecom"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:telecom.value[x]"> <path value="Extension.extension.value[x]"/> <short value="Contact details (e.g.phone/fax/url)"/> <definition value="The contact details application for the purpose defined."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="ContactPoint"/> </type> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:address"> <path value="Extension.extension"/> <sliceName value="address"/> <short value="R5: Address for the contact (new)"/> <definition value="R5: `ExtendedContactDetail.address` (new:Address)"/> <comment value="Element `ExtendedContactDetail.address` is not mapped to FHIR STU3, since FHIR R5 `ExtendedContactDetail` is not mapped. Element `ExtendedContactDetail.address` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). More than 1 address would be for different purposes, and thus should be entered as a different entry,."/> <requirements value="Element `ExtendedContactDetail.address` is not mapped to FHIR STU3, since FHIR R5 `ExtendedContactDetail` is not mapped. Element `ExtendedContactDetail.address` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="1"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> </element> <element id="Extension.extension:address.id"> <path value="Extension.extension.id"/> <representation value="xmlAttr"/> <short value="xml:id (or equivalent in JSON)"/> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:address.extension"> <path value="Extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <rules value="open"/> </slicing> <short value="Additional Content defined by implementations"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:address.url"> <path value="Extension.extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <code value="uri"/> </type> <fixedUri value="address"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:address.value[x]"> <path value="Extension.extension.value[x]"/> <short value="Address for the contact"/> <definition value="Address for the contact."/> <comment value="More than 1 address would be for different purposes, and thus should be entered as a different entry,."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="Address"/> </type> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:organization"> <path value="Extension.extension"/> <sliceName value="organization"/> <short value="R5: This contact detail is handled/monitored by a specific organization (new)"/> <definition value="R5: `ExtendedContactDetail.organization` (new:Reference(Organization))"/> <comment value="Element `ExtendedContactDetail.organization` is not mapped to FHIR STU3, since FHIR R5 `ExtendedContactDetail` is not mapped. Element `ExtendedContactDetail.organization` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Some specific types of contact information can be an handled by an organization (eg legal council is via a specific firm). Element `ExtendedContactDetail.organization` is not mapped to FHIR STU3, since FHIR R5 `ExtendedContactDetail` is not mapped. Element `ExtendedContactDetail.organization` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="1"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> </element> <element id="Extension.extension:organization.id"> <path value="Extension.extension.id"/> <representation value="xmlAttr"/> <short value="xml:id (or equivalent in JSON)"/> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:organization.extension"> <path value="Extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <rules value="open"/> </slicing> <short value="Additional Content defined by implementations"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:organization.url"> <path value="Extension.extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <code value="uri"/> </type> <fixedUri value="organization"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:organization.value[x]"> <path value="Extension.extension.value[x]"/> <short value="This contact detail is handled/monitored by a specific organization"/> <definition value="This contact detail is handled/monitored by a specific organization. If the name is provided in the contact, then it is referring to the named individual within this organization."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="Reference"/> <targetProfile value="http://hl7.org/fhir/5.0/StructureDefinition/profile-Organization|0.1.0"/> </type> <type> <code value="Reference"/> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Organization"/> </type> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:period"> <path value="Extension.extension"/> <sliceName value="period"/> <short value="R5: Period that this contact was valid for usage (new)"/> <definition value="R5: `ExtendedContactDetail.period` (new:Period)"/> <comment value="Element `ExtendedContactDetail.period` is not mapped to FHIR STU3, since FHIR R5 `ExtendedContactDetail` is not mapped. Element `ExtendedContactDetail.period` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). If the details have multiple periods, then enter in a new ExtendedContact with the new period."/> <requirements value="Element `ExtendedContactDetail.period` is not mapped to FHIR STU3, since FHIR R5 `ExtendedContactDetail` is not mapped. Element `ExtendedContactDetail.period` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="1"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> </element> <element id="Extension.extension:period.id"> <path value="Extension.extension.id"/> <representation value="xmlAttr"/> <short value="xml:id (or equivalent in JSON)"/> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:period.extension"> <path value="Extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <rules value="open"/> </slicing> <short value="Additional Content defined by implementations"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:period.url"> <path value="Extension.extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <code value="uri"/> </type> <fixedUri value="period"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:period.value[x]"> <path value="Extension.extension.value[x]"/> <short value="Period that this contact was valid for usage"/> <definition value="Period that this contact was valid for usage."/> <comment value="If the details have multiple periods, then enter in a new ExtendedContact with the new period."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="Period"/> </type> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.url"> <path value="Extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <code value="uri"/> </type> <fixedUri value="http://hl7.org/fhir/5.0/StructureDefinition/extension-HealthcareService.contact"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.value[x]"> <path value="Extension.value[x]"/> <short value="Value of extension"/> <definition value="Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list)."/> <min value="0"/> <max value="0"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="base64Binary"/> </type> <type> <code value="boolean"/> </type> <type> <code value="code"/> </type> <type> <code value="date"/> </type> <type> <code value="dateTime"/> </type> <type> <code value="decimal"/> </type> <type> <code value="id"/> </type> <type> <code value="instant"/> </type> <type> <code value="integer"/> </type> <type> <code value="markdown"/> </type> <type> <code value="oid"/> </type> <type> <code value="positiveInt"/> </type> <type> <code value="string"/> </type> <type> <code value="time"/> </type> <type> <code value="unsignedInt"/> </type> <type> <code value="uri"/> </type> <type> <code value="Address"/> </type> <type> <code value="Age"/> </type> <type> <code value="Annotation"/> </type> <type> <code value="Attachment"/> </type> <type> <code value="CodeableConcept"/> </type> <type> <code value="Coding"/> </type> <type> <code value="ContactPoint"/> </type> <type> <code value="Count"/> </type> <type> <code value="Distance"/> </type> <type> <code value="Duration"/> </type> <type> <code value="HumanName"/> </type> <type> <code value="Identifier"/> </type> <type> <code value="Money"/> </type> <type> <code value="Period"/> </type> <type> <code value="Quantity"/> </type> <type> <code value="Range"/> </type> <type> <code value="Ratio"/> </type> <type> <code value="Reference"/> </type> <type> <code value="SampledData"/> </type> <type> <code value="Signature"/> </type> <type> <code value="Timing"/> </type> <type> <code value="Meta"/> </type> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> </snapshot> <differential> <element id="Extension"> <path value="Extension"/> <short value="R5: Official contact details for the HealthcareService (new)"/> <definition value="R5: `HealthcareService.contact` (new:ExtendedContactDetail)"/> <comment value="Element `HealthcareService.contact` has a context of HealthcareService based on following the parent source element upwards and mapping to `HealthcareService`. Element `HealthcareService.contact` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). The address/telecom use code 'home' are not to be used. Note that these contacts are not the contact details of people who provide the service (that would be through PractitionerRole), these are official contacts for the HealthcareService itself for specific purposes. E.g. Mailing Addresses, Billing Addresses, Contact numbers for Booking or Billing Enquiries, general web address, web address for online bookings etc. If this is empty (or the type of interest is empty), refer to the location's contacts."/> <min value="0"/> <max value="*"/> <base> <path value="Extension"/> <min value="0"/> <max value="*"/> </base> <isModifier value="false"/> </element> <element id="Extension.extension"> <path value="Extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <ordered value="false"/> <rules value="open"/> </slicing> <min value="0"/> <max value="*"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:_datatype"> <path value="Extension.extension"/> <sliceName value="_datatype"/> <short value="DataType slice for a FHIR R5 `ExtendedContactDetail` value"/> <definition value="Slice to indicate the presence of a R5 `ExtendedContactDetail` in FHIR STU3"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:_datatype.url"> <path value="Extension.extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="http://hl7.org/fhir/StructureDefinition/_datatype"/> </element> <element id="Extension.extension:_datatype.value[x]"> <path value="Extension.extension.value[x]"/> <comment value="Must be: ExtendedContactDetail"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <fixedString value="ExtendedContactDetail"/> </element> <element id="Extension.extension:purpose"> <path value="Extension.extension"/> <sliceName value="purpose"/> <short value="R5: The type of contact (new)"/> <definition value="R5: `ExtendedContactDetail.purpose` (new:CodeableConcept)"/> <comment value="Element `ExtendedContactDetail.purpose` is not mapped to FHIR STU3, since FHIR R5 `ExtendedContactDetail` is not mapped. Element `ExtendedContactDetail.purpose` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). If no purpose is defined, then these contact details may be used for any purpose."/> <requirements value="Element `ExtendedContactDetail.purpose` is not mapped to FHIR STU3, since FHIR R5 `ExtendedContactDetail` is not mapped. Element `ExtendedContactDetail.purpose` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:purpose.url"> <path value="Extension.extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="purpose"/> </element> <element id="Extension.extension:purpose.value[x]"> <path value="Extension.extension.value[x]"/> <short value="The type of contact"/> <definition value="The purpose/type of contact."/> <comment value="If no purpose is defined, then these contact details may be used for any purpose."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> <binding> <strength value="preferred"/> <description value="The purpose for which an extended contact detail should be used."/> <valueSetUri value="http://hl7.org/fhir/ValueSet/contactentity-type|3.0.2"/> </binding> </element> <element id="Extension.extension:name"> <path value="Extension.extension"/> <sliceName value="name"/> <short value="R5: Name of an individual to contact (new)"/> <definition value="R5: `ExtendedContactDetail.name` (new:HumanName)"/> <comment value="Element `ExtendedContactDetail.name` is not mapped to FHIR STU3, since FHIR R5 `ExtendedContactDetail` is not mapped. Element `ExtendedContactDetail.name` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). If there is no named individual, the telecom/address information is not generally monitored by a specific individual."/> <requirements value="Element `ExtendedContactDetail.name` is not mapped to FHIR STU3, since FHIR R5 `ExtendedContactDetail` is not mapped. Element `ExtendedContactDetail.name` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="*"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:name.url"> <path value="Extension.extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="name"/> </element> <element id="Extension.extension:name.value[x]"> <path value="Extension.extension.value[x]"/> <short value="Name of an individual to contact"/> <definition value="The name of an individual to contact, some types of contact detail are usually blank."/> <comment value="If there is no named individual, the telecom/address information is not generally monitored by a specific individual."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="HumanName"/> </type> </element> <element id="Extension.extension:telecom"> <path value="Extension.extension"/> <sliceName value="telecom"/> <short value="R5: Contact details (e.g.phone/fax/url) (new)"/> <definition value="R5: `ExtendedContactDetail.telecom` (new:ContactPoint)"/> <comment value="Element `ExtendedContactDetail.telecom` is not mapped to FHIR STU3, since FHIR R5 `ExtendedContactDetail` is not mapped. Element `ExtendedContactDetail.telecom` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `ExtendedContactDetail.telecom` is not mapped to FHIR STU3, since FHIR R5 `ExtendedContactDetail` is not mapped. Element `ExtendedContactDetail.telecom` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="*"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:telecom.url"> <path value="Extension.extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="telecom"/> </element> <element id="Extension.extension:telecom.value[x]"> <path value="Extension.extension.value[x]"/> <short value="Contact details (e.g.phone/fax/url)"/> <definition value="The contact details application for the purpose defined."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="ContactPoint"/> </type> </element> <element id="Extension.extension:address"> <path value="Extension.extension"/> <sliceName value="address"/> <short value="R5: Address for the contact (new)"/> <definition value="R5: `ExtendedContactDetail.address` (new:Address)"/> <comment value="Element `ExtendedContactDetail.address` is not mapped to FHIR STU3, since FHIR R5 `ExtendedContactDetail` is not mapped. Element `ExtendedContactDetail.address` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). More than 1 address would be for different purposes, and thus should be entered as a different entry,."/> <requirements value="Element `ExtendedContactDetail.address` is not mapped to FHIR STU3, since FHIR R5 `ExtendedContactDetail` is not mapped. Element `ExtendedContactDetail.address` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:address.url"> <path value="Extension.extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="address"/> </element> <element id="Extension.extension:address.value[x]"> <path value="Extension.extension.value[x]"/> <short value="Address for the contact"/> <definition value="Address for the contact."/> <comment value="More than 1 address would be for different purposes, and thus should be entered as a different entry,."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="Address"/> </type> </element> <element id="Extension.extension:organization"> <path value="Extension.extension"/> <sliceName value="organization"/> <short value="R5: This contact detail is handled/monitored by a specific organization (new)"/> <definition value="R5: `ExtendedContactDetail.organization` (new:Reference(Organization))"/> <comment value="Element `ExtendedContactDetail.organization` is not mapped to FHIR STU3, since FHIR R5 `ExtendedContactDetail` is not mapped. Element `ExtendedContactDetail.organization` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Some specific types of contact information can be an handled by an organization (eg legal council is via a specific firm). Element `ExtendedContactDetail.organization` is not mapped to FHIR STU3, since FHIR R5 `ExtendedContactDetail` is not mapped. Element `ExtendedContactDetail.organization` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:organization.url"> <path value="Extension.extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="organization"/> </element> <element id="Extension.extension:organization.value[x]"> <path value="Extension.extension.value[x]"/> <short value="This contact detail is handled/monitored by a specific organization"/> <definition value="This contact detail is handled/monitored by a specific organization. If the name is provided in the contact, then it is referring to the named individual within this organization."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="Reference"/> <targetProfile value="http://hl7.org/fhir/5.0/StructureDefinition/profile-Organization|0.1.0"/> </type> <type> <code value="Reference"/> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Organization"/> </type> </element> <element id="Extension.extension:period"> <path value="Extension.extension"/> <sliceName value="period"/> <short value="R5: Period that this contact was valid for usage (new)"/> <definition value="R5: `ExtendedContactDetail.period` (new:Period)"/> <comment value="Element `ExtendedContactDetail.period` is not mapped to FHIR STU3, since FHIR R5 `ExtendedContactDetail` is not mapped. Element `ExtendedContactDetail.period` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). If the details have multiple periods, then enter in a new ExtendedContact with the new period."/> <requirements value="Element `ExtendedContactDetail.period` is not mapped to FHIR STU3, since FHIR R5 `ExtendedContactDetail` is not mapped. Element `ExtendedContactDetail.period` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:period.url"> <path value="Extension.extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="period"/> </element> <element id="Extension.extension:period.value[x]"> <path value="Extension.extension.value[x]"/> <short value="Period that this contact was valid for usage"/> <definition value="Period that this contact was valid for usage."/> <comment value="If the details have multiple periods, then enter in a new ExtendedContact with the new period."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="Period"/> </type> </element> <element id="Extension.url"> <path value="Extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="http://hl7.org/fhir/5.0/StructureDefinition/extension-HealthcareService.contact"/> </element> <element id="Extension.value[x]"> <path value="Extension.value[x]"/> <min value="0"/> <max value="0"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> </element> </differential> </StructureDefinition>

Generated Narrative: StructureDefinition ext-R5-HealthcareService.contact

Name	Card.	Type	Description & Constraints
Extension	0..*	Extension	R5: Official contact details for the HealthcareService (new)
Slices for extension	0..*	Extension	Extension Slice: Unordered, Open by value:url
extension:_datatype	1..1	Extension	DataType slice for a FHIR R5 `ExtendedContactDetail` value
url	1..1	uri	"http://hl7.org/fhir/StructureDefinition/_datatype"
value[x]	1..1	string	Value of extension Fixed Value: ExtendedContactDetail
extension:purpose	0..1	Extension	R5: The type of contact (new)
url	1..1	uri	"purpose"
value[x]	0..1	CodeableConcept	The type of contact Binding: ContactEntityType (preferred): The purpose for which an extended contact detail should be used.
extension:name	0..*	Extension	R5: Name of an individual to contact (new)
url	1..1	uri	"name"
value[x]	0..1	HumanName	Name of an individual to contact
extension:telecom	0..*	Extension	R5: Contact details (e.g.phone/fax/url) (new)
url	1..1	uri	"telecom"
value[x]	0..1	ContactPoint	Contact details (e.g.phone/fax/url)
extension:address	0..1	Extension	R5: Address for the contact (new)
url	1..1	uri	"address"
value[x]	0..1	Address	Address for the contact
extension:organization	0..1	Extension	R5: This contact detail is handled/monitored by a specific organization (new)
url	1..1	uri	"organization"
value[x]	0..1	Reference(Cross-version Profile for R5.Organization for use in FHIR STU3(0.1.0) \| Organization)	This contact detail is handled/monitored by a specific organization
extension:period	0..1	Extension	R5: Period that this contact was valid for usage (new)
url	1..1	uri	"period"
value[x]	0..1	Period	Period that this contact was valid for usage
url	1..1	uri	"http://hl7.org/fhir/5.0/StructureDefinition/extension-HealthcareService.contact"
value[x]	0..0		Value of extension
Documentation for this format