Extensions for Using Data Elements from FHIR R5 in FHIR STU3
0.1.0 - STU International flag

Extensions for Using Data Elements from FHIR R5 in FHIR STU3 - Downloaded Version null See the Directory of published versions

Extension: ExtensionDeviceDefinition_Packaging - Detailed Descriptions

Page standards status: Trial-use Maturity Level: 0

Definitions for the ext-R5-DeviceDefinition.packaging extension.

Guidance on how to interpret the contents of this table can be foundhere

0. Extension
Definition

R5: DeviceDefinition.packaging (new:BackboneElement)


Optional Extension Element - found in all resources.

ShortR5: Information about the packaging of the device, i.e. how the device is packaged (new)Optional Extensions Element
Comments

Element DeviceDefinition.packaging is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.packaging has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Control0..*
This element is affected by the following invariants: ele-1
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
2. Extension.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional Content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Alternate Namesextensions, user content
SlicingThis element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 4. Extension.extension:identifier
    Slice Nameidentifier
    Definition

    R5: DeviceDefinition.packaging.identifier (new:Identifier)

    ShortR5: Business identifier of the packaged medication (new)Additional Content defined by implementations
    Comments

    Element DeviceDefinition.packaging.identifier is part of an existing definition because parent element DeviceDefinition.packaging requires a cross-version extension. Element DeviceDefinition.packaging.identifier is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.packaging.identifier has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..1*
    TypeExtension
    Requirements

    Element DeviceDefinition.packaging.identifier is part of an existing definition because parent element DeviceDefinition.packaging requires a cross-version extension. Element DeviceDefinition.packaging.identifier is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.packaging.identifier has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    6. Extension.extension:identifier.url
    Definition

    Source of the definition for the extension code - a logical name or a URL.

    Shortidentifies the meaning of the extension
    Comments

    The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

    Control1..1
    Typeuri
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    XML FormatIn the XML format, this property is represented as an attribute.
    Fixed Valueidentifier
    8. Extension.extension:identifier.value[x]
    Definition

    The business identifier of the packaged medication.


    Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).

    ShortBusiness identifier of the packaged medicationValue of extension
    Control0..1
    TypeIdentifier, date, dateTime, Meta, code, string, Address, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Money, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Quantity, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal, CodeableConcept
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    10. Extension.extension:type
    Slice Nametype
    Definition

    R5: DeviceDefinition.packaging.type (new:CodeableConcept)

    ShortR5: A code that defines the specific type of packaging (new)Additional Content defined by implementations
    Comments

    Element DeviceDefinition.packaging.type is part of an existing definition because parent element DeviceDefinition.packaging requires a cross-version extension. Element DeviceDefinition.packaging.type is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.packaging.type has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..1*
    TypeExtension
    Requirements

    Element DeviceDefinition.packaging.type is part of an existing definition because parent element DeviceDefinition.packaging requires a cross-version extension. Element DeviceDefinition.packaging.type is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.packaging.type has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    12. Extension.extension:type.url
    Definition

    Source of the definition for the extension code - a logical name or a URL.

    Shortidentifies the meaning of the extension
    Comments

    The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

    Control1..1
    Typeuri
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    XML FormatIn the XML format, this property is represented as an attribute.
    Fixed Valuetype
    14. Extension.extension:type.value[x]
    Definition

    A code that defines the specific type of packaging.


    Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).

    ShortA code that defines the specific type of packagingValue of extension
    Control0..1
    TypeCodeableConcept, date, dateTime, Meta, code, string, Address, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Quantity, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    16. Extension.extension:count
    Slice Namecount
    Definition

    R5: DeviceDefinition.packaging.count (new:integer)

    ShortR5: The number of items contained in the package (devices or sub-packages) (new)Additional Content defined by implementations
    Comments

    Element DeviceDefinition.packaging.count is part of an existing definition because parent element DeviceDefinition.packaging requires a cross-version extension. Element DeviceDefinition.packaging.count is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.packaging.count has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..1*
    TypeExtension
    Requirements

    Element DeviceDefinition.packaging.count is part of an existing definition because parent element DeviceDefinition.packaging requires a cross-version extension. Element DeviceDefinition.packaging.count is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.packaging.count has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    18. Extension.extension:count.url
    Definition

    Source of the definition for the extension code - a logical name or a URL.

    Shortidentifies the meaning of the extension
    Comments

    The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

    Control1..1
    Typeuri
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    XML FormatIn the XML format, this property is represented as an attribute.
    Fixed Valuecount
    20. Extension.extension:count.value[x]
    Definition

    The number of items contained in the package (devices or sub-packages).


    Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).

    ShortThe number of items contained in the package (devices or sub-packages)Value of extension
    Control0..1
    Typeinteger, date, dateTime, Meta, code, string, Address, Attachment, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Quantity, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal, CodeableConcept
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    22. Extension.extension:distributor
    Slice Namedistributor
    Definition

    R5: DeviceDefinition.packaging.distributor (new:BackboneElement)

    ShortR5: An organization that distributes the packaged device (new)Additional Content defined by implementations
    Comments

    Element DeviceDefinition.packaging.distributor is part of an existing definition because parent element DeviceDefinition.packaging requires a cross-version extension. Element DeviceDefinition.packaging.distributor is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.packaging.distributor has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..*
    TypeExtension
    Requirements

    Element DeviceDefinition.packaging.distributor is part of an existing definition because parent element DeviceDefinition.packaging requires a cross-version extension. Element DeviceDefinition.packaging.distributor is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.packaging.distributor has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    24. Extension.extension:distributor.extension
    Definition

    An Extension


    May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortExtensionAdditional Content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Alternate Namesextensions, user content
    SlicingThis element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • 26. Extension.extension:distributor.extension:name
      Slice Namename
      Definition

      R5: DeviceDefinition.packaging.distributor.name (new:string)

      ShortR5: Distributor's human-readable name (new)Additional Content defined by implementations
      Comments

      Element DeviceDefinition.packaging.distributor.name is part of an existing definition because parent element DeviceDefinition.packaging.distributor requires a cross-version extension. Element DeviceDefinition.packaging.distributor.name is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.packaging.distributor.name has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      Control0..1*
      TypeExtension
      Requirements

      Element DeviceDefinition.packaging.distributor.name is part of an existing definition because parent element DeviceDefinition.packaging.distributor requires a cross-version extension. Element DeviceDefinition.packaging.distributor.name is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.packaging.distributor.name has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      28. Extension.extension:distributor.extension:name.url
      Definition

      Source of the definition for the extension code - a logical name or a URL.

      Shortidentifies the meaning of the extension
      Comments

      The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

      Control1..1
      Typeuri
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      XML FormatIn the XML format, this property is represented as an attribute.
      Fixed Valuename
      30. Extension.extension:distributor.extension:name.value[x]
      Definition

      Distributor's human-readable name.


      Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).

      ShortDistributor's human-readable nameValue of extension
      Control0..1
      Typestring, date, dateTime, Meta, code, Address, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Quantity, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal, CodeableConcept
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      32. Extension.extension:distributor.extension:organizationReference
      Slice NameorganizationReference
      Definition

      R5: DeviceDefinition.packaging.distributor.organizationReference (new:Reference(Organization))

      ShortR5: Distributor as an Organization resource (new)Additional Content defined by implementations
      Comments

      Element DeviceDefinition.packaging.distributor.organizationReference is part of an existing definition because parent element DeviceDefinition.packaging.distributor requires a cross-version extension. Element DeviceDefinition.packaging.distributor.organizationReference is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.packaging.distributor.organizationReference has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      Control0..*
      TypeExtension
      Requirements

      Element DeviceDefinition.packaging.distributor.organizationReference is part of an existing definition because parent element DeviceDefinition.packaging.distributor requires a cross-version extension. Element DeviceDefinition.packaging.distributor.organizationReference is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.packaging.distributor.organizationReference has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      34. Extension.extension:distributor.extension:organizationReference.url
      Definition

      Source of the definition for the extension code - a logical name or a URL.

      Shortidentifies the meaning of the extension
      Comments

      The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

      Control1..1
      Typeuri
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      XML FormatIn the XML format, this property is represented as an attribute.
      Fixed ValueorganizationReference
      36. Extension.extension:distributor.extension:organizationReference.value[x]
      Definition

      Distributor as an Organization resource.


      Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).

      ShortDistributor as an Organization resourceValue of extension
      Control0..1
      TypeReference(Cross-version Profile for R5.Organization for use in FHIR STU3, Organization), date, dateTime, Meta, code, string, Address, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Period, Quantity, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal, CodeableConcept
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      38. Extension.extension:distributor.url
      Definition

      Source of the definition for the extension code - a logical name or a URL.

      Shortidentifies the meaning of the extension
      Comments

      The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

      Control1..1
      Typeuri
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      XML FormatIn the XML format, this property is represented as an attribute.
      Fixed Valuedistributor
      40. Extension.extension:distributor.value[x]
      Definition

      Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).

      ShortValue of extension
      Control0..01
      TypeChoice of: base64Binary, boolean, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, Meta
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      42. Extension.extension:udiDeviceIdentifier
      Slice NameudiDeviceIdentifier
      Definition

      R5: DeviceDefinition.packaging.udiDeviceIdentifier (new:DeviceDefinition.udiDeviceIdentifier)

      ShortR5: Unique Device Identifier (UDI) Barcode string on the packaging (new)Additional Content defined by implementations
      Comments

      Element DeviceDefinition.packaging.udiDeviceIdentifier is part of an existing definition because parent element DeviceDefinition.packaging requires a cross-version extension. Element DeviceDefinition.packaging.udiDeviceIdentifier is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.packaging.udiDeviceIdentifier has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      Control0..*
      TypeExtension
      Requirements

      Element DeviceDefinition.packaging.udiDeviceIdentifier is part of an existing definition because parent element DeviceDefinition.packaging requires a cross-version extension. Element DeviceDefinition.packaging.udiDeviceIdentifier is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.packaging.udiDeviceIdentifier has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      44. Extension.extension:udiDeviceIdentifier.url
      Definition

      Source of the definition for the extension code - a logical name or a URL.

      Shortidentifies the meaning of the extension
      Comments

      The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

      Control1..1
      Typeuri
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      XML FormatIn the XML format, this property is represented as an attribute.
      Fixed Valuehttp://hl7.org/fhir/5.0/StructureDefinition/extension-DeviceDefinition.udiDeviceIdentifier
      46. Extension.extension:udiDeviceIdentifier.value[x]
      Definition

      Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).

      ShortValue of extension
      Control0..01
      TypeChoice of: base64Binary, boolean, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, Meta
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      48. Extension.extension:packaging
      Slice Namepackaging
      Definition

      R5: DeviceDefinition.packaging.packaging (new:DeviceDefinition.packaging)

      ShortR5: Allows packages within packages (new)Additional Content defined by implementations
      Comments

      Element DeviceDefinition.packaging.packaging is part of an existing definition because parent element DeviceDefinition.packaging requires a cross-version extension. Element DeviceDefinition.packaging.packaging is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.packaging.packaging has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      Control0..*
      TypeExtension
      Requirements

      Element DeviceDefinition.packaging.packaging is part of an existing definition because parent element DeviceDefinition.packaging requires a cross-version extension. Element DeviceDefinition.packaging.packaging is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.packaging.packaging has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      50. Extension.extension:packaging.url
      Definition

      Source of the definition for the extension code - a logical name or a URL.

      Shortidentifies the meaning of the extension
      Comments

      The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

      Control1..1
      Typeuri
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      XML FormatIn the XML format, this property is represented as an attribute.
      Fixed Valuehttp://hl7.org/fhir/5.0/StructureDefinition/extension-DeviceDefinition.packaging
      52. Extension.extension:packaging.value[x]
      Definition

      Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).

      ShortValue of extension
      Control0..01
      TypeChoice of: base64Binary, boolean, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, Meta
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      54. Extension.url
      Definition

      Source of the definition for the extension code - a logical name or a URL.

      Shortidentifies the meaning of the extension
      Comments

      The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

      Control1..1
      Typeuri
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      XML FormatIn the XML format, this property is represented as an attribute.
      Fixed Valuehttp://hl7.org/fhir/5.0/StructureDefinition/extension-DeviceDefinition.packaging
      56. Extension.value[x]
      Definition

      Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).

      ShortValue of extension
      Control0..01
      TypeChoice of: base64Binary, boolean, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, Meta
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension

      Guidance on how to interpret the contents of this table can be foundhere

      0. Extension
      Definition

      R5: DeviceDefinition.packaging (new:BackboneElement)

      ShortR5: Information about the packaging of the device, i.e. how the device is packaged (new)
      Comments

      Element DeviceDefinition.packaging is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.packaging has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      Control0..*
      Is Modifierfalse
      2. Extension.extension
      Control0..*
      SlicingThis element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 4. Extension.extension:identifier
        Slice Nameidentifier
        Definition

        R5: DeviceDefinition.packaging.identifier (new:Identifier)

        ShortR5: Business identifier of the packaged medication (new)
        Comments

        Element DeviceDefinition.packaging.identifier is part of an existing definition because parent element DeviceDefinition.packaging requires a cross-version extension. Element DeviceDefinition.packaging.identifier is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.packaging.identifier has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..1
        Requirements

        Element DeviceDefinition.packaging.identifier is part of an existing definition because parent element DeviceDefinition.packaging requires a cross-version extension. Element DeviceDefinition.packaging.identifier is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.packaging.identifier has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        6. Extension.extension:identifier.url
        Control1..1
        Fixed Valueidentifier
        8. Extension.extension:identifier.value[x]
        Definition

        The business identifier of the packaged medication.

        ShortBusiness identifier of the packaged medication
        Control0..1
        TypeIdentifier
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        10. Extension.extension:type
        Slice Nametype
        Definition

        R5: DeviceDefinition.packaging.type (new:CodeableConcept)

        ShortR5: A code that defines the specific type of packaging (new)
        Comments

        Element DeviceDefinition.packaging.type is part of an existing definition because parent element DeviceDefinition.packaging requires a cross-version extension. Element DeviceDefinition.packaging.type is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.packaging.type has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..1
        Requirements

        Element DeviceDefinition.packaging.type is part of an existing definition because parent element DeviceDefinition.packaging requires a cross-version extension. Element DeviceDefinition.packaging.type is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.packaging.type has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        12. Extension.extension:type.url
        Control1..1
        Fixed Valuetype
        14. Extension.extension:type.value[x]
        Definition

        A code that defines the specific type of packaging.

        ShortA code that defines the specific type of packaging
        Control0..1
        TypeCodeableConcept
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        16. Extension.extension:count
        Slice Namecount
        Definition

        R5: DeviceDefinition.packaging.count (new:integer)

        ShortR5: The number of items contained in the package (devices or sub-packages) (new)
        Comments

        Element DeviceDefinition.packaging.count is part of an existing definition because parent element DeviceDefinition.packaging requires a cross-version extension. Element DeviceDefinition.packaging.count is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.packaging.count has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..1
        Requirements

        Element DeviceDefinition.packaging.count is part of an existing definition because parent element DeviceDefinition.packaging requires a cross-version extension. Element DeviceDefinition.packaging.count is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.packaging.count has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        18. Extension.extension:count.url
        Control1..1
        Fixed Valuecount
        20. Extension.extension:count.value[x]
        Definition

        The number of items contained in the package (devices or sub-packages).

        ShortThe number of items contained in the package (devices or sub-packages)
        Control0..1
        Typeinteger
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        22. Extension.extension:distributor
        Slice Namedistributor
        Definition

        R5: DeviceDefinition.packaging.distributor (new:BackboneElement)

        ShortR5: An organization that distributes the packaged device (new)
        Comments

        Element DeviceDefinition.packaging.distributor is part of an existing definition because parent element DeviceDefinition.packaging requires a cross-version extension. Element DeviceDefinition.packaging.distributor is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.packaging.distributor has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..*
        Requirements

        Element DeviceDefinition.packaging.distributor is part of an existing definition because parent element DeviceDefinition.packaging requires a cross-version extension. Element DeviceDefinition.packaging.distributor is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.packaging.distributor has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        24. Extension.extension:distributor.extension
        Control0..*
        SlicingThis element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 26. Extension.extension:distributor.extension:name
          Slice Namename
          Definition

          R5: DeviceDefinition.packaging.distributor.name (new:string)

          ShortR5: Distributor's human-readable name (new)
          Comments

          Element DeviceDefinition.packaging.distributor.name is part of an existing definition because parent element DeviceDefinition.packaging.distributor requires a cross-version extension. Element DeviceDefinition.packaging.distributor.name is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.packaging.distributor.name has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

          Control0..1
          Requirements

          Element DeviceDefinition.packaging.distributor.name is part of an existing definition because parent element DeviceDefinition.packaging.distributor requires a cross-version extension. Element DeviceDefinition.packaging.distributor.name is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.packaging.distributor.name has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

          28. Extension.extension:distributor.extension:name.url
          Control1..1
          Fixed Valuename
          30. Extension.extension:distributor.extension:name.value[x]
          Definition

          Distributor's human-readable name.

          ShortDistributor's human-readable name
          Control0..1
          Typestring
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          32. Extension.extension:distributor.extension:organizationReference
          Slice NameorganizationReference
          Definition

          R5: DeviceDefinition.packaging.distributor.organizationReference (new:Reference(Organization))

          ShortR5: Distributor as an Organization resource (new)
          Comments

          Element DeviceDefinition.packaging.distributor.organizationReference is part of an existing definition because parent element DeviceDefinition.packaging.distributor requires a cross-version extension. Element DeviceDefinition.packaging.distributor.organizationReference is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.packaging.distributor.organizationReference has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

          Control0..*
          Requirements

          Element DeviceDefinition.packaging.distributor.organizationReference is part of an existing definition because parent element DeviceDefinition.packaging.distributor requires a cross-version extension. Element DeviceDefinition.packaging.distributor.organizationReference is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.packaging.distributor.organizationReference has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

          34. Extension.extension:distributor.extension:organizationReference.url
          Control1..1
          Fixed ValueorganizationReference
          36. Extension.extension:distributor.extension:organizationReference.value[x]
          Definition

          Distributor as an Organization resource.

          ShortDistributor as an Organization resource
          Control0..1
          TypeReference(Cross-version Profile for R5.Organization for use in FHIR STU3, Organization)
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          38. Extension.extension:distributor.url
          Control1..1
          Fixed Valuedistributor
          40. Extension.extension:distributor.value[x]
          Control0..0
          42. Extension.extension:udiDeviceIdentifier
          Slice NameudiDeviceIdentifier
          Definition

          R5: DeviceDefinition.packaging.udiDeviceIdentifier (new:DeviceDefinition.udiDeviceIdentifier)

          ShortR5: Unique Device Identifier (UDI) Barcode string on the packaging (new)
          Comments

          Element DeviceDefinition.packaging.udiDeviceIdentifier is part of an existing definition because parent element DeviceDefinition.packaging requires a cross-version extension. Element DeviceDefinition.packaging.udiDeviceIdentifier is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.packaging.udiDeviceIdentifier has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

          Control0..*
          Requirements

          Element DeviceDefinition.packaging.udiDeviceIdentifier is part of an existing definition because parent element DeviceDefinition.packaging requires a cross-version extension. Element DeviceDefinition.packaging.udiDeviceIdentifier is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.packaging.udiDeviceIdentifier has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

          44. Extension.extension:udiDeviceIdentifier.url
          Control1..1
          Fixed Valuehttp://hl7.org/fhir/5.0/StructureDefinition/extension-DeviceDefinition.udiDeviceIdentifier
          46. Extension.extension:udiDeviceIdentifier.value[x]
          Control0..0
          48. Extension.extension:packaging
          Slice Namepackaging
          Definition

          R5: DeviceDefinition.packaging.packaging (new:DeviceDefinition.packaging)

          ShortR5: Allows packages within packages (new)
          Comments

          Element DeviceDefinition.packaging.packaging is part of an existing definition because parent element DeviceDefinition.packaging requires a cross-version extension. Element DeviceDefinition.packaging.packaging is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.packaging.packaging has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

          Control0..*
          Requirements

          Element DeviceDefinition.packaging.packaging is part of an existing definition because parent element DeviceDefinition.packaging requires a cross-version extension. Element DeviceDefinition.packaging.packaging is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.packaging.packaging has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

          50. Extension.extension:packaging.url
          Control1..1
          Fixed Valuehttp://hl7.org/fhir/5.0/StructureDefinition/extension-DeviceDefinition.packaging
          52. Extension.extension:packaging.value[x]
          Control0..0
          54. Extension.url
          Control1..1
          Fixed Valuehttp://hl7.org/fhir/5.0/StructureDefinition/extension-DeviceDefinition.packaging
          56. Extension.value[x]
          Control0..0

          Guidance on how to interpret the contents of this table can be foundhere

          0. Extension
          Definition

          R5: DeviceDefinition.packaging (new:BackboneElement)

          ShortR5: Information about the packaging of the device, i.e. how the device is packaged (new)
          Comments

          Element DeviceDefinition.packaging is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.packaging has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

          Control0..*
          This element is affected by the following invariants: ele-1
          Is Modifierfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          2. Extension.id
          Definition

          unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          Shortxml:id (or equivalent in JSON)
          Control0..1
          Typestring
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          XML FormatIn the XML format, this property is represented as an attribute.
          4. Extension.extension
          Definition

          An Extension

          ShortExtension
          Control0..*
          TypeExtension
          SlicingThis element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ url
          • 6. Extension.extension:identifier
            Slice Nameidentifier
            Definition

            R5: DeviceDefinition.packaging.identifier (new:Identifier)

            ShortR5: Business identifier of the packaged medication (new)
            Comments

            Element DeviceDefinition.packaging.identifier is part of an existing definition because parent element DeviceDefinition.packaging requires a cross-version extension. Element DeviceDefinition.packaging.identifier is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.packaging.identifier has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

            Control0..1
            TypeExtension
            Requirements

            Element DeviceDefinition.packaging.identifier is part of an existing definition because parent element DeviceDefinition.packaging requires a cross-version extension. Element DeviceDefinition.packaging.identifier is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.packaging.identifier has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

            8. Extension.extension:identifier.id
            Definition

            unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            Shortxml:id (or equivalent in JSON)
            Control0..1
            Typestring
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            XML FormatIn the XML format, this property is represented as an attribute.
            10. Extension.extension:identifier.extension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            ShortAdditional Content defined by implementations
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Alternate Namesextensions, user content
            SlicingThis element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • value @ url
            • 12. Extension.extension:identifier.url
              Definition

              Source of the definition for the extension code - a logical name or a URL.

              Shortidentifies the meaning of the extension
              Comments

              The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

              Control1..1
              Typeuri
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              XML FormatIn the XML format, this property is represented as an attribute.
              Fixed Valueidentifier
              14. Extension.extension:identifier.value[x]
              Definition

              The business identifier of the packaged medication.

              ShortBusiness identifier of the packaged medication
              Control0..1
              TypeIdentifier
              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
              16. Extension.extension:type
              Slice Nametype
              Definition

              R5: DeviceDefinition.packaging.type (new:CodeableConcept)

              ShortR5: A code that defines the specific type of packaging (new)
              Comments

              Element DeviceDefinition.packaging.type is part of an existing definition because parent element DeviceDefinition.packaging requires a cross-version extension. Element DeviceDefinition.packaging.type is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.packaging.type has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

              Control0..1
              TypeExtension
              Requirements

              Element DeviceDefinition.packaging.type is part of an existing definition because parent element DeviceDefinition.packaging requires a cross-version extension. Element DeviceDefinition.packaging.type is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.packaging.type has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

              18. Extension.extension:type.id
              Definition

              unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              Shortxml:id (or equivalent in JSON)
              Control0..1
              Typestring
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              XML FormatIn the XML format, this property is represented as an attribute.
              20. Extension.extension:type.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional Content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Alternate Namesextensions, user content
              SlicingThis element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
              • value @ url
              • 22. Extension.extension:type.url
                Definition

                Source of the definition for the extension code - a logical name or a URL.

                Shortidentifies the meaning of the extension
                Comments

                The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

                Control1..1
                Typeuri
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                XML FormatIn the XML format, this property is represented as an attribute.
                Fixed Valuetype
                24. Extension.extension:type.value[x]
                Definition

                A code that defines the specific type of packaging.

                ShortA code that defines the specific type of packaging
                Control0..1
                TypeCodeableConcept
                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                26. Extension.extension:count
                Slice Namecount
                Definition

                R5: DeviceDefinition.packaging.count (new:integer)

                ShortR5: The number of items contained in the package (devices or sub-packages) (new)
                Comments

                Element DeviceDefinition.packaging.count is part of an existing definition because parent element DeviceDefinition.packaging requires a cross-version extension. Element DeviceDefinition.packaging.count is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.packaging.count has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

                Control0..1
                TypeExtension
                Requirements

                Element DeviceDefinition.packaging.count is part of an existing definition because parent element DeviceDefinition.packaging requires a cross-version extension. Element DeviceDefinition.packaging.count is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.packaging.count has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

                28. Extension.extension:count.id
                Definition

                unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                Shortxml:id (or equivalent in JSON)
                Control0..1
                Typestring
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                XML FormatIn the XML format, this property is represented as an attribute.
                30. Extension.extension:count.extension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                ShortAdditional Content defined by implementations
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Alternate Namesextensions, user content
                SlicingThis element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                • value @ url
                • 32. Extension.extension:count.url
                  Definition

                  Source of the definition for the extension code - a logical name or a URL.

                  Shortidentifies the meaning of the extension
                  Comments

                  The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

                  Control1..1
                  Typeuri
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  XML FormatIn the XML format, this property is represented as an attribute.
                  Fixed Valuecount
                  34. Extension.extension:count.value[x]
                  Definition

                  The number of items contained in the package (devices or sub-packages).

                  ShortThe number of items contained in the package (devices or sub-packages)
                  Control0..1
                  Typeinteger
                  [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  36. Extension.extension:distributor
                  Slice Namedistributor
                  Definition

                  R5: DeviceDefinition.packaging.distributor (new:BackboneElement)

                  ShortR5: An organization that distributes the packaged device (new)
                  Comments

                  Element DeviceDefinition.packaging.distributor is part of an existing definition because parent element DeviceDefinition.packaging requires a cross-version extension. Element DeviceDefinition.packaging.distributor is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.packaging.distributor has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

                  Control0..*
                  TypeExtension
                  Requirements

                  Element DeviceDefinition.packaging.distributor is part of an existing definition because parent element DeviceDefinition.packaging requires a cross-version extension. Element DeviceDefinition.packaging.distributor is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.packaging.distributor has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

                  38. Extension.extension:distributor.id
                  Definition

                  unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                  Shortxml:id (or equivalent in JSON)
                  Control0..1
                  Typestring
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  XML FormatIn the XML format, this property is represented as an attribute.
                  40. Extension.extension:distributor.extension
                  Definition

                  An Extension

                  ShortExtension
                  Control0..*
                  TypeExtension
                  SlicingThis element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                  • value @ url
                  • 42. Extension.extension:distributor.extension:name
                    Slice Namename
                    Definition

                    R5: DeviceDefinition.packaging.distributor.name (new:string)

                    ShortR5: Distributor's human-readable name (new)
                    Comments

                    Element DeviceDefinition.packaging.distributor.name is part of an existing definition because parent element DeviceDefinition.packaging.distributor requires a cross-version extension. Element DeviceDefinition.packaging.distributor.name is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.packaging.distributor.name has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

                    Control0..1
                    TypeExtension
                    Requirements

                    Element DeviceDefinition.packaging.distributor.name is part of an existing definition because parent element DeviceDefinition.packaging.distributor requires a cross-version extension. Element DeviceDefinition.packaging.distributor.name is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.packaging.distributor.name has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

                    44. Extension.extension:distributor.extension:name.id
                    Definition

                    unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                    Shortxml:id (or equivalent in JSON)
                    Control0..1
                    Typestring
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    XML FormatIn the XML format, this property is represented as an attribute.
                    46. Extension.extension:distributor.extension:name.extension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                    ShortAdditional Content defined by implementations
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Alternate Namesextensions, user content
                    SlicingThis element introduces a set of slices on Extension.extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                    • value @ url
                    • 48. Extension.extension:distributor.extension:name.url
                      Definition

                      Source of the definition for the extension code - a logical name or a URL.

                      Shortidentifies the meaning of the extension
                      Comments

                      The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

                      Control1..1
                      Typeuri
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      XML FormatIn the XML format, this property is represented as an attribute.
                      Fixed Valuename
                      50. Extension.extension:distributor.extension:name.value[x]
                      Definition

                      Distributor's human-readable name.

                      ShortDistributor's human-readable name
                      Control0..1
                      Typestring
                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      52. Extension.extension:distributor.extension:organizationReference
                      Slice NameorganizationReference
                      Definition

                      R5: DeviceDefinition.packaging.distributor.organizationReference (new:Reference(Organization))

                      ShortR5: Distributor as an Organization resource (new)
                      Comments

                      Element DeviceDefinition.packaging.distributor.organizationReference is part of an existing definition because parent element DeviceDefinition.packaging.distributor requires a cross-version extension. Element DeviceDefinition.packaging.distributor.organizationReference is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.packaging.distributor.organizationReference has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

                      Control0..*
                      TypeExtension
                      Requirements

                      Element DeviceDefinition.packaging.distributor.organizationReference is part of an existing definition because parent element DeviceDefinition.packaging.distributor requires a cross-version extension. Element DeviceDefinition.packaging.distributor.organizationReference is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.packaging.distributor.organizationReference has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

                      54. Extension.extension:distributor.extension:organizationReference.id
                      Definition

                      unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                      Shortxml:id (or equivalent in JSON)
                      Control0..1
                      Typestring
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      XML FormatIn the XML format, this property is represented as an attribute.
                      56. Extension.extension:distributor.extension:organizationReference.extension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                      ShortAdditional Content defined by implementations
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      TypeExtension
                      Alternate Namesextensions, user content
                      SlicingThis element introduces a set of slices on Extension.extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                      • value @ url
                      • 58. Extension.extension:distributor.extension:organizationReference.url
                        Definition

                        Source of the definition for the extension code - a logical name or a URL.

                        Shortidentifies the meaning of the extension
                        Comments

                        The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

                        Control1..1
                        Typeuri
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        XML FormatIn the XML format, this property is represented as an attribute.
                        Fixed ValueorganizationReference
                        60. Extension.extension:distributor.extension:organizationReference.value[x]
                        Definition

                        Distributor as an Organization resource.

                        ShortDistributor as an Organization resource
                        Control0..1
                        TypeReference(Cross-version Profile for R5.Organization for use in FHIR STU3, Organization)
                        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                        62. Extension.extension:distributor.url
                        Definition

                        Source of the definition for the extension code - a logical name or a URL.

                        Shortidentifies the meaning of the extension
                        Comments

                        The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

                        Control1..1
                        Typeuri
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        XML FormatIn the XML format, this property is represented as an attribute.
                        Fixed Valuedistributor
                        64. Extension.extension:distributor.value[x]
                        Definition

                        Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).

                        ShortValue of extension
                        Control0..0
                        TypeChoice of: base64Binary, boolean, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, Meta
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        66. Extension.extension:udiDeviceIdentifier
                        Slice NameudiDeviceIdentifier
                        Definition

                        R5: DeviceDefinition.packaging.udiDeviceIdentifier (new:DeviceDefinition.udiDeviceIdentifier)

                        ShortR5: Unique Device Identifier (UDI) Barcode string on the packaging (new)
                        Comments

                        Element DeviceDefinition.packaging.udiDeviceIdentifier is part of an existing definition because parent element DeviceDefinition.packaging requires a cross-version extension. Element DeviceDefinition.packaging.udiDeviceIdentifier is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.packaging.udiDeviceIdentifier has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

                        Control0..*
                        TypeExtension
                        Requirements

                        Element DeviceDefinition.packaging.udiDeviceIdentifier is part of an existing definition because parent element DeviceDefinition.packaging requires a cross-version extension. Element DeviceDefinition.packaging.udiDeviceIdentifier is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.packaging.udiDeviceIdentifier has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

                        68. Extension.extension:udiDeviceIdentifier.id
                        Definition

                        unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                        Shortxml:id (or equivalent in JSON)
                        Control0..1
                        Typestring
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        XML FormatIn the XML format, this property is represented as an attribute.
                        70. Extension.extension:udiDeviceIdentifier.extension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                        ShortAdditional Content defined by implementations
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        TypeExtension
                        Alternate Namesextensions, user content
                        SlicingThis element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                        • value @ url
                        • 72. Extension.extension:udiDeviceIdentifier.url
                          Definition

                          Source of the definition for the extension code - a logical name or a URL.

                          Shortidentifies the meaning of the extension
                          Comments

                          The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

                          Control1..1
                          Typeuri
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          XML FormatIn the XML format, this property is represented as an attribute.
                          Fixed Valuehttp://hl7.org/fhir/5.0/StructureDefinition/extension-DeviceDefinition.udiDeviceIdentifier
                          74. Extension.extension:udiDeviceIdentifier.value[x]
                          Definition

                          Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).

                          ShortValue of extension
                          Control0..0
                          TypeChoice of: base64Binary, boolean, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, Meta
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          76. Extension.extension:packaging
                          Slice Namepackaging
                          Definition

                          R5: DeviceDefinition.packaging.packaging (new:DeviceDefinition.packaging)

                          ShortR5: Allows packages within packages (new)
                          Comments

                          Element DeviceDefinition.packaging.packaging is part of an existing definition because parent element DeviceDefinition.packaging requires a cross-version extension. Element DeviceDefinition.packaging.packaging is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.packaging.packaging has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

                          Control0..*
                          TypeExtension
                          Requirements

                          Element DeviceDefinition.packaging.packaging is part of an existing definition because parent element DeviceDefinition.packaging requires a cross-version extension. Element DeviceDefinition.packaging.packaging is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.packaging.packaging has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

                          78. Extension.extension:packaging.id
                          Definition

                          unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                          Shortxml:id (or equivalent in JSON)
                          Control0..1
                          Typestring
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          XML FormatIn the XML format, this property is represented as an attribute.
                          80. Extension.extension:packaging.extension
                          Definition

                          May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                          ShortAdditional Content defined by implementations
                          Comments

                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                          Control0..*
                          TypeExtension
                          Alternate Namesextensions, user content
                          SlicingThis element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                          • value @ url
                          • 82. Extension.extension:packaging.url
                            Definition

                            Source of the definition for the extension code - a logical name or a URL.

                            Shortidentifies the meaning of the extension
                            Comments

                            The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

                            Control1..1
                            Typeuri
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            XML FormatIn the XML format, this property is represented as an attribute.
                            Fixed Valuehttp://hl7.org/fhir/5.0/StructureDefinition/extension-DeviceDefinition.packaging
                            84. Extension.extension:packaging.value[x]
                            Definition

                            Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).

                            ShortValue of extension
                            Control0..0
                            TypeChoice of: base64Binary, boolean, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, Meta
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            86. Extension.url
                            Definition

                            Source of the definition for the extension code - a logical name or a URL.

                            Shortidentifies the meaning of the extension
                            Comments

                            The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

                            Control1..1
                            Typeuri
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            XML FormatIn the XML format, this property is represented as an attribute.
                            Fixed Valuehttp://hl7.org/fhir/5.0/StructureDefinition/extension-DeviceDefinition.packaging
                            88. Extension.value[x]
                            Definition

                            Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).

                            ShortValue of extension
                            Control0..0
                            TypeChoice of: base64Binary, boolean, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, Meta
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension