<status value="active"/> <experimental value="false"/> <date value="2026-03-17T21:02:03.8104715+00:00"/> <publisher value="FHIR Infrastructure"/> <contact> <name value="FHIR Infrastructure"/> <telecom> <system value="url"/> <value value="http://www.hl7.org/Special/committees/fiwg"/> </telecom> </contact> <description value="R5: `BodyStructure.includedStructure` (new:BackboneElement)"/> <jurisdiction> <coding> <system value="http://unstats.un.org/unsd/methods/m49/m49.htm"/> <code value="001"/> <display value="World"/> </coding> </jurisdiction> <purpose value="This extension is part of the cross-version definitions generated to enable use of the element `BodyStructure.includedStructure` as defined in FHIR R5 in FHIR STU3. The source element is defined as: `BodyStructure.includedStructure` 1..* `BackboneElement` Across FHIR versions, the element set has been mapped as: * R5: `BodyStructure.includedStructure` 1..* `BackboneElement` Following are the generation technical comments: Element `BodyStructure.includedStructure` has a context of BodySite based on following the parent source element upwards and mapping to `BodySite`. Element `BodyStructure.includedStructure` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <fhirVersion value="3.0.2"/> <mapping> <identity value="rim"/> <uri value="http://hl7.org/v3"/> <name value="RIM Mapping"/> </mapping> <kind value="complex-type"/> <abstract value="false"/> <contextType value="resource"/> <context value="BodySite"/> <type value="Extension"/> <baseDefinition value="http://hl7.org/fhir/StructureDefinition/Extension"/> <derivation value="constraint"/> <snapshot> <element id="Extension"> <path value="Extension"/> <short value="R5: Included anatomic location(s) (new)"/> <definition value="R5: `BodyStructure.includedStructure` (new:BackboneElement)"/> <comment value="Element `BodyStructure.includedStructure` has a context of BodySite based on following the parent source element upwards and mapping to `BodySite`. Element `BodyStructure.includedStructure` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="1"/> <max value="*"/> <base> <path value="Extension"/> <min value="0"/> <max value="*"/> </base> <condition value="ele-1"/> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() | (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <constraint> <key value="ext-1"/> <severity value="error"/> <human value="Must have either extensions or value[x], not both"/> <expression value="extension.exists() != value.exists()"/> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])"/> <source value="http://hl7.org/fhir/StructureDefinition/Extension"/> </constraint> <isModifier value="false"/> </element> <element id="Extension.id"> <path value="Extension.id"/> <representation value="xmlAttr"/> <short value="xml:id (or equivalent in JSON)"/> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension"> <path value="Extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <ordered value="false"/> <rules value="open"/> </slicing> <short value="Extension"/> <definition value="An Extension"/> <min value="1"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> </element> <element id="Extension.extension:structure"> <path value="Extension.extension"/> <sliceName value="structure"/> <short value="R5: Code that represents the included structure (new)"/> <definition value="R5: `BodyStructure.includedStructure.structure` (new:CodeableConcept)"/> <comment value="Element `BodyStructure.includedStructure.structure` is part of an existing definition because parent element `BodyStructure.includedStructure` requires a cross-version extension. Element `BodyStructure.includedStructure.structure` has a context of BodySite based on following the parent source element upwards and mapping to `BodySite`. Element `BodyStructure.includedStructure.structure` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `BodyStructure.includedStructure.structure` is part of an existing definition because parent element `BodyStructure.includedStructure` requires a cross-version extension. Element `BodyStructure.includedStructure.structure` has a context of BodySite based on following the parent source element upwards and mapping to `BodySite`. Element `BodyStructure.includedStructure.structure` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="1"/> <max value="1"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> </element> <element id="Extension.extension:structure.id"> <path value="Extension.extension.id"/> <representation value="xmlAttr"/> <short value="xml:id (or equivalent in JSON)"/> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:structure.extension"> <path value="Extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <rules value="open"/> </slicing> <short value="Additional Content defined by implementations"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:structure.url"> <path value="Extension.extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <code value="uri"/> </type> <fixedUri value="structure"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:structure.value[x]"> <path value="Extension.extension.value[x]"/> <short value="Code that represents the included structure"/> <definition value="Code that represents the included structure."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:laterality"> <path value="Extension.extension"/> <sliceName value="laterality"/> <short value="R5: Code that represents the included structure laterality (new)"/> <definition value="R5: `BodyStructure.includedStructure.laterality` (new:CodeableConcept)"/> <comment value="Element `BodyStructure.includedStructure.laterality` is part of an existing definition because parent element `BodyStructure.includedStructure` requires a cross-version extension. Element `BodyStructure.includedStructure.laterality` has a context of BodySite based on following the parent source element upwards and mapping to `BodySite`. Element `BodyStructure.includedStructure.laterality` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `BodyStructure.includedStructure.laterality` is part of an existing definition because parent element `BodyStructure.includedStructure` requires a cross-version extension. Element `BodyStructure.includedStructure.laterality` has a context of BodySite based on following the parent source element upwards and mapping to `BodySite`. Element `BodyStructure.includedStructure.laterality` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="1"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> </element> <element id="Extension.extension:laterality.id"> <path value="Extension.extension.id"/> <representation value="xmlAttr"/> <short value="xml:id (or equivalent in JSON)"/> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:laterality.extension"> <path value="Extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <rules value="open"/> </slicing> <short value="Additional Content defined by implementations"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:laterality.url"> <path value="Extension.extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <code value="uri"/> </type> <fixedUri value="laterality"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:laterality.value[x]"> <path value="Extension.extension.value[x]"/> <short value="Code that represents the included structure laterality"/> <definition value="Code that represents the included structure laterality."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:bodyLandmarkOrientation"> <path value="Extension.extension"/> <sliceName value="bodyLandmarkOrientation"/> <short value="R5: Landmark relative location (new)"/> <definition value="R5: `BodyStructure.includedStructure.bodyLandmarkOrientation` (new:BackboneElement)"/> <comment value="Element `BodyStructure.includedStructure.bodyLandmarkOrientation` is part of an existing definition because parent element `BodyStructure.includedStructure` requires a cross-version extension. Element `BodyStructure.includedStructure.bodyLandmarkOrientation` has a context of BodySite based on following the parent source element upwards and mapping to `BodySite`. Element `BodyStructure.includedStructure.bodyLandmarkOrientation` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `BodyStructure.includedStructure.bodyLandmarkOrientation` is part of an existing definition because parent element `BodyStructure.includedStructure` requires a cross-version extension. Element `BodyStructure.includedStructure.bodyLandmarkOrientation` has a context of BodySite based on following the parent source element upwards and mapping to `BodySite`. Element `BodyStructure.includedStructure.bodyLandmarkOrientation` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> </element> <element id="Extension.extension:bodyLandmarkOrientation.id"> <path value="Extension.extension.id"/> <representation value="xmlAttr"/> <short value="xml:id (or equivalent in JSON)"/> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension"> <path value="Extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <ordered value="false"/> <rules value="open"/> </slicing> <short value="Extension"/> <definition value="An Extension"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:landmarkDescription"> <path value="Extension.extension.extension"/> <sliceName value="landmarkDescription"/> <short value="R5: Body ]andmark description (new)"/> <definition value="R5: `BodyStructure.includedStructure.bodyLandmarkOrientation.landmarkDescription` (new:CodeableConcept)"/> <comment value="Element `BodyStructure.includedStructure.bodyLandmarkOrientation.landmarkDescription` is part of an existing definition because parent element `BodyStructure.includedStructure.bodyLandmarkOrientation` requires a cross-version extension. Element `BodyStructure.includedStructure.bodyLandmarkOrientation.landmarkDescription` has a context of BodySite based on following the parent source element upwards and mapping to `BodySite`. Element `BodyStructure.includedStructure.bodyLandmarkOrientation.landmarkDescription` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `BodyStructure.includedStructure.bodyLandmarkOrientation.landmarkDescription` is part of an existing definition because parent element `BodyStructure.includedStructure.bodyLandmarkOrientation` requires a cross-version extension. Element `BodyStructure.includedStructure.bodyLandmarkOrientation.landmarkDescription` has a context of BodySite based on following the parent source element upwards and mapping to `BodySite`. Element `BodyStructure.includedStructure.bodyLandmarkOrientation.landmarkDescription` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:landmarkDescription.id"> <path value="Extension.extension.extension.id"/> <representation value="xmlAttr"/> <short value="xml:id (or equivalent in JSON)"/> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:landmarkDescription.extension"> <path value="Extension.extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <rules value="open"/> </slicing> <short value="Additional Content defined by implementations"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:landmarkDescription.url"> <path value="Extension.extension.extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <code value="uri"/> </type> <fixedUri value="landmarkDescription"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:landmarkDescription.value[x]"> <path value="Extension.extension.extension.value[x]"/> <short value="Body ]andmark description"/> <definition value="A description of a landmark on the body used as a reference to locate something else."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:clockFacePosition"> <path value="Extension.extension.extension"/> <sliceName value="clockFacePosition"/> <short value="R5: Clockface orientation (new)"/> <definition value="R5: `BodyStructure.includedStructure.bodyLandmarkOrientation.clockFacePosition` (new:CodeableConcept)"/> <comment value="Element `BodyStructure.includedStructure.bodyLandmarkOrientation.clockFacePosition` is part of an existing definition because parent element `BodyStructure.includedStructure.bodyLandmarkOrientation` requires a cross-version extension. Element `BodyStructure.includedStructure.bodyLandmarkOrientation.clockFacePosition` has a context of BodySite based on following the parent source element upwards and mapping to `BodySite`. Element `BodyStructure.includedStructure.bodyLandmarkOrientation.clockFacePosition` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `BodyStructure.includedStructure.bodyLandmarkOrientation.clockFacePosition` is part of an existing definition because parent element `BodyStructure.includedStructure.bodyLandmarkOrientation` requires a cross-version extension. Element `BodyStructure.includedStructure.bodyLandmarkOrientation.clockFacePosition` has a context of BodySite based on following the parent source element upwards and mapping to `BodySite`. Element `BodyStructure.includedStructure.bodyLandmarkOrientation.clockFacePosition` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:clockFacePosition.id"> <path value="Extension.extension.extension.id"/> <representation value="xmlAttr"/> <short value="xml:id (or equivalent in JSON)"/> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:clockFacePosition.extension"> <path value="Extension.extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <rules value="open"/> </slicing> <short value="Additional Content defined by implementations"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:clockFacePosition.url"> <path value="Extension.extension.extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <code value="uri"/> </type> <fixedUri value="clockFacePosition"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:clockFacePosition.value[x]"> <path value="Extension.extension.extension.value[x]"/> <short value="Clockface orientation"/> <definition value="An description of the direction away from a landmark something is located based on a radial clock dial."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:distanceFromLandmark"> <path value="Extension.extension.extension"/> <sliceName value="distanceFromLandmark"/> <short value="R5: Landmark relative location (new)"/> <definition value="R5: `BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark` (new:BackboneElement)"/> <comment value="Element `BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark` is part of an existing definition because parent element `BodyStructure.includedStructure.bodyLandmarkOrientation` requires a cross-version extension. Element `BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark` has a context of BodySite based on following the parent source element upwards and mapping to `BodySite`. Element `BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark` is part of an existing definition because parent element `BodyStructure.includedStructure.bodyLandmarkOrientation` requires a cross-version extension. Element `BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark` has a context of BodySite based on following the parent source element upwards and mapping to `BodySite`. Element `BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:distanceFromLandmark.id"> <path value="Extension.extension.extension.id"/> <representation value="xmlAttr"/> <short value="xml:id (or equivalent in JSON)"/> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:distanceFromLandmark.extension"> <path value="Extension.extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <ordered value="false"/> <rules value="open"/> </slicing> <short value="Extension"/> <definition value="An Extension"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:distanceFromLandmark.extension:device"> <path value="Extension.extension.extension.extension"/> <sliceName value="device"/> <short value="R5: Measurement device (new)"/> <definition value="R5: `BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark.device` (new:CodeableReference(Device))"/> <comment value="Element `BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark.device` is part of an existing definition because parent element `BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark` requires a cross-version extension. Element `BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark.device` has a context of BodySite based on following the parent source element upwards and mapping to `BodySite`. Element `BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark.device` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark.device` is part of an existing definition because parent element `BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark` requires a cross-version extension. Element `BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark.device` has a context of BodySite based on following the parent source element upwards and mapping to `BodySite`. Element `BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark.device` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:distanceFromLandmark.extension:device.id"> <path value="Extension.extension.extension.extension.id"/> <representation value="xmlAttr"/> <short value="xml:id (or equivalent in JSON)"/> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:distanceFromLandmark.extension:device.extension"> <path value="Extension.extension.extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <ordered value="false"/> <rules value="open"/> </slicing> <short value="Extension"/> <definition value="An Extension"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:distanceFromLandmark.extension:device.extension:_datatype"> <path value="Extension.extension.extension.extension.extension"/> <sliceName value="_datatype"/> <short value="DataType slice for a FHIR R5 `CodeableReference` value"/> <definition value="Slice to indicate the presence of a R5 `CodeableReference` in FHIR STU3"/> <min value="1"/> <max value="1"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:distanceFromLandmark.extension:device.extension:_datatype.id"> <path value="Extension.extension.extension.extension.extension.id"/> <representation value="xmlAttr"/> <short value="xml:id (or equivalent in JSON)"/> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:distanceFromLandmark.extension:device.extension:_datatype.extension"> <path value="Extension.extension.extension.extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <rules value="open"/> </slicing> <short value="Additional Content defined by implementations"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:distanceFromLandmark.extension:device.extension:_datatype.url"> <path value="Extension.extension.extension.extension.extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <code value="uri"/> </type> <fixedUri value="http://hl7.org/fhir/StructureDefinition/_datatype"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:distanceFromLandmark.extension:device.extension:_datatype.value[x]"> <path value="Extension.extension.extension.extension.extension.value[x]"/> <short value="Value of extension"/> <definition value="Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list)."/> <comment value="Must be: CodeableReference"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <fixedString value="CodeableReference"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:distanceFromLandmark.extension:device.extension:concept"> <path value="Extension.extension.extension.extension.extension"/> <sliceName value="concept"/> <short value="R5: Reference to a concept (by class)"/> <definition value="R5: `CodeableReference.concept`"/> <comment value="Element `CodeableReference.concept` is mapped to FHIR STU3 element `CodeableConcept` as `Equivalent`."/> <requirements value="Element `CodeableReference.concept` is mapped to FHIR STU3 element `CodeableConcept` as `Equivalent`."/> <min value="0"/> <max value="1"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:distanceFromLandmark.extension:device.extension:concept.id"> <path value="Extension.extension.extension.extension.extension.id"/> <representation value="xmlAttr"/> <short value="xml:id (or equivalent in JSON)"/> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:distanceFromLandmark.extension:device.extension:concept.extension"> <path value="Extension.extension.extension.extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <rules value="open"/> </slicing> <short value="Additional Content defined by implementations"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:distanceFromLandmark.extension:device.extension:concept.url"> <path value="Extension.extension.extension.extension.extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <code value="uri"/> </type> <fixedUri value="concept"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:distanceFromLandmark.extension:device.extension:concept.value[x]"> <path value="Extension.extension.extension.extension.extension.value[x]"/> <short value="Reference to a concept (by class)"/> <definition value="A reference to a concept - e.g. the information is identified by its general class to the degree of precision found in the terminology."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:distanceFromLandmark.extension:device.extension:reference"> <path value="Extension.extension.extension.extension.extension"/> <sliceName value="reference"/> <short value="R5: Reference to a resource (by instance)"/> <definition value="R5: `CodeableReference.reference`"/> <comment value="Element `CodeableReference.reference` is mapped to FHIR STU3 element `Reference` as `Equivalent`."/> <requirements value="Element `CodeableReference.reference` is mapped to FHIR STU3 element `Reference` as `Equivalent`."/> <min value="0"/> <max value="1"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:distanceFromLandmark.extension:device.extension:reference.id"> <path value="Extension.extension.extension.extension.extension.id"/> <representation value="xmlAttr"/> <short value="xml:id (or equivalent in JSON)"/> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:distanceFromLandmark.extension:device.extension:reference.extension"> <path value="Extension.extension.extension.extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <rules value="open"/> </slicing> <short value="Additional Content defined by implementations"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:distanceFromLandmark.extension:device.extension:reference.url"> <path value="Extension.extension.extension.extension.extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <code value="uri"/> </type> <fixedUri value="reference"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:distanceFromLandmark.extension:device.extension:reference.value[x]"> <path value="Extension.extension.extension.extension.extension.value[x]"/> <short value="Reference to a resource (by instance)"/> <definition value="A reference to a resource the provides exact details about the information being referenced."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="Reference"/> <targetProfile value="http://hl7.org/fhir/5.0/StructureDefinition/profile-Device|0.1.0"/> </type> <type> <code value="Reference"/> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Device"/> </type> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:distanceFromLandmark.extension:device.url"> <path value="Extension.extension.extension.extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <code value="uri"/> </type> <fixedUri value="device"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:distanceFromLandmark.extension:device.value[x]"> <path value="Extension.extension.extension.extension.value[x]"/> <short value="Value of extension"/> <definition value="Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list)."/> <min value="0"/> <max value="0"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="base64Binary"/> </type> <type> <code value="boolean"/> </type> <type> <code value="code"/> </type> <type> <code value="date"/> </type> <type> <code value="dateTime"/> </type> <type> <code value="decimal"/> </type> <type> <code value="id"/> </type> <type> <code value="instant"/> </type> <type> <code value="integer"/> </type> <type> <code value="markdown"/> </type> <type> <code value="oid"/> </type> <type> <code value="positiveInt"/> </type> <type> <code value="string"/> </type> <type> <code value="time"/> </type> <type> <code value="unsignedInt"/> </type> <type> <code value="uri"/> </type> <type> <code value="Address"/> </type> <type> <code value="Age"/> </type> <type> <code value="Annotation"/> </type> <type> <code value="Attachment"/> </type> <type> <code value="CodeableConcept"/> </type> <type> <code value="Coding"/> </type> <type> <code value="ContactPoint"/> </type> <type> <code value="Count"/> </type> <type> <code value="Distance"/> </type> <type> <code value="Duration"/> </type> <type> <code value="HumanName"/> </type> <type> <code value="Identifier"/> </type> <type> <code value="Money"/> </type> <type> <code value="Period"/> </type> <type> <code value="Quantity"/> </type> <type> <code value="Range"/> </type> <type> <code value="Ratio"/> </type> <type> <code value="Reference"/> </type> <type> <code value="SampledData"/> </type> <type> <code value="Signature"/> </type> <type> <code value="Timing"/> </type> <type> <code value="Meta"/> </type> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:distanceFromLandmark.extension:value"> <path value="Extension.extension.extension.extension"/> <sliceName value="value"/> <short value="R5: Measured distance from body landmark (new)"/> <definition value="R5: `BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark.value` (new:Quantity)"/> <comment value="Element `BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark.value` is part of an existing definition because parent element `BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark` requires a cross-version extension. Element `BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark.value` has a context of BodySite based on following the parent source element upwards and mapping to `BodySite`. Element `BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark.value` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark.value` is part of an existing definition because parent element `BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark` requires a cross-version extension. Element `BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark.value` has a context of BodySite based on following the parent source element upwards and mapping to `BodySite`. Element `BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark.value` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:distanceFromLandmark.extension:value.id"> <path value="Extension.extension.extension.extension.id"/> <representation value="xmlAttr"/> <short value="xml:id (or equivalent in JSON)"/> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:distanceFromLandmark.extension:value.extension"> <path value="Extension.extension.extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <rules value="open"/> </slicing> <short value="Additional Content defined by implementations"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:distanceFromLandmark.extension:value.url"> <path value="Extension.extension.extension.extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <code value="uri"/> </type> <fixedUri value="value"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:distanceFromLandmark.extension:value.value[x]"> <path value="Extension.extension.extension.extension.value[x]"/> <short value="Measured distance from body landmark"/> <definition value="The measured distance (e.g., in cm) from a body landmark."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="Quantity"/> </type> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:distanceFromLandmark.url"> <path value="Extension.extension.extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <code value="uri"/> </type> <fixedUri value="distanceFromLandmark"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:distanceFromLandmark.value[x]"> <path value="Extension.extension.extension.value[x]"/> <short value="Value of extension"/> <definition value="Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list)."/> <min value="0"/> <max value="0"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="base64Binary"/> </type> <type> <code value="boolean"/> </type> <type> <code value="code"/> </type> <type> <code value="date"/> </type> <type> <code value="dateTime"/> </type> <type> <code value="decimal"/> </type> <type> <code value="id"/> </type> <type> <code value="instant"/> </type> <type> <code value="integer"/> </type> <type> <code value="markdown"/> </type> <type> <code value="oid"/> </type> <type> <code value="positiveInt"/> </type> <type> <code value="string"/> </type> <type> <code value="time"/> </type> <type> <code value="unsignedInt"/> </type> <type> <code value="uri"/> </type> <type> <code value="Address"/> </type> <type> <code value="Age"/> </type> <type> <code value="Annotation"/> </type> <type> <code value="Attachment"/> </type> <type> <code value="CodeableConcept"/> </type> <type> <code value="Coding"/> </type> <type> <code value="ContactPoint"/> </type> <type> <code value="Count"/> </type> <type> <code value="Distance"/> </type> <type> <code value="Duration"/> </type> <type> <code value="HumanName"/> </type> <type> <code value="Identifier"/> </type> <type> <code value="Money"/> </type> <type> <code value="Period"/> </type> <type> <code value="Quantity"/> </type> <type> <code value="Range"/> </type> <type> <code value="Ratio"/> </type> <type> <code value="Reference"/> </type> <type> <code value="SampledData"/> </type> <type> <code value="Signature"/> </type> <type> <code value="Timing"/> </type> <type> <code value="Meta"/> </type> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:surfaceOrientation"> <path value="Extension.extension.extension"/> <sliceName value="surfaceOrientation"/> <short value="R5: Relative landmark surface orientation (new)"/> <definition value="R5: `BodyStructure.includedStructure.bodyLandmarkOrientation.surfaceOrientation` (new:CodeableConcept)"/> <comment value="Element `BodyStructure.includedStructure.bodyLandmarkOrientation.surfaceOrientation` is part of an existing definition because parent element `BodyStructure.includedStructure.bodyLandmarkOrientation` requires a cross-version extension. Element `BodyStructure.includedStructure.bodyLandmarkOrientation.surfaceOrientation` has a context of BodySite based on following the parent source element upwards and mapping to `BodySite`. Element `BodyStructure.includedStructure.bodyLandmarkOrientation.surfaceOrientation` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `BodyStructure.includedStructure.bodyLandmarkOrientation.surfaceOrientation` is part of an existing definition because parent element `BodyStructure.includedStructure.bodyLandmarkOrientation` requires a cross-version extension. Element `BodyStructure.includedStructure.bodyLandmarkOrientation.surfaceOrientation` has a context of BodySite based on following the parent source element upwards and mapping to `BodySite`. Element `BodyStructure.includedStructure.bodyLandmarkOrientation.surfaceOrientation` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:surfaceOrientation.id"> <path value="Extension.extension.extension.id"/> <representation value="xmlAttr"/> <short value="xml:id (or equivalent in JSON)"/> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:surfaceOrientation.extension"> <path value="Extension.extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <rules value="open"/> </slicing> <short value="Additional Content defined by implementations"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:surfaceOrientation.url"> <path value="Extension.extension.extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <code value="uri"/> </type> <fixedUri value="surfaceOrientation"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:surfaceOrientation.value[x]"> <path value="Extension.extension.extension.value[x]"/> <short value="Relative landmark surface orientation"/> <definition value="The surface area a body location is in relation to a landmark."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:bodyLandmarkOrientation.url"> <path value="Extension.extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <code value="uri"/> </type> <fixedUri value="bodyLandmarkOrientation"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:bodyLandmarkOrientation.value[x]"> <path value="Extension.extension.value[x]"/> <short value="Value of extension"/> <definition value="Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list)."/> <min value="0"/> <max value="0"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="base64Binary"/> </type> <type> <code value="boolean"/> </type> <type> <code value="code"/> </type> <type> <code value="date"/> </type> <type> <code value="dateTime"/> </type> <type> <code value="decimal"/> </type> <type> <code value="id"/> </type> <type> <code value="instant"/> </type> <type> <code value="integer"/> </type> <type> <code value="markdown"/> </type> <type> <code value="oid"/> </type> <type> <code value="positiveInt"/> </type> <type> <code value="string"/> </type> <type> <code value="time"/> </type> <type> <code value="unsignedInt"/> </type> <type> <code value="uri"/> </type> <type> <code value="Address"/> </type> <type> <code value="Age"/> </type> <type> <code value="Annotation"/> </type> <type> <code value="Attachment"/> </type> <type> <code value="CodeableConcept"/> </type> <type> <code value="Coding"/> </type> <type> <code value="ContactPoint"/> </type> <type> <code value="Count"/> </type> <type> <code value="Distance"/> </type> <type> <code value="Duration"/> </type> <type> <code value="HumanName"/> </type> <type> <code value="Identifier"/> </type> <type> <code value="Money"/> </type> <type> <code value="Period"/> </type> <type> <code value="Quantity"/> </type> <type> <code value="Range"/> </type> <type> <code value="Ratio"/> </type> <type> <code value="Reference"/> </type> <type> <code value="SampledData"/> </type> <type> <code value="Signature"/> </type> <type> <code value="Timing"/> </type> <type> <code value="Meta"/> </type> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:spatialReference"> <path value="Extension.extension"/> <sliceName value="spatialReference"/> <short value="R5: Cartesian reference for structure (new)"/> <definition value="R5: `BodyStructure.includedStructure.spatialReference` (new:Reference(ImagingSelection))"/> <comment value="Element `BodyStructure.includedStructure.spatialReference` is part of an existing definition because parent element `BodyStructure.includedStructure` requires a cross-version extension. Element `BodyStructure.includedStructure.spatialReference` has a context of BodySite based on following the parent source element upwards and mapping to `BodySite`. Element `BodyStructure.includedStructure.spatialReference` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `BodyStructure.includedStructure.spatialReference` is part of an existing definition because parent element `BodyStructure.includedStructure` requires a cross-version extension. Element `BodyStructure.includedStructure.spatialReference` has a context of BodySite based on following the parent source element upwards and mapping to `BodySite`. Element `BodyStructure.includedStructure.spatialReference` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> </element> <element id="Extension.extension:spatialReference.id"> <path value="Extension.extension.id"/> <representation value="xmlAttr"/> <short value="xml:id (or equivalent in JSON)"/> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:spatialReference.extension"> <path value="Extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <rules value="open"/> </slicing> <short value="Additional Content defined by implementations"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:spatialReference.url"> <path value="Extension.extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <code value="uri"/> </type> <fixedUri value="spatialReference"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:spatialReference.value[x]"> <path value="Extension.extension.value[x]"/> <short value="Cartesian reference for structure"/> <definition value="XY or XYZ-coordinate orientation for structure."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="Reference"/> <targetProfile value="http://hl7.org/fhir/5.0/StructureDefinition/profile-ImagingSelection|0.1.0"/> </type> <type> <code value="Reference"/> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Basic"/> </type> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:qualifier"> <path value="Extension.extension"/> <sliceName value="qualifier"/> <short value="R5: Code that represents the included structure qualifier"/> <definition value="R5: `BodyStructure.includedStructure.qualifier`"/> <comment value="Element `BodyStructure.includedStructure.qualifier` is part of an existing definition because parent element `BodyStructure.includedStructure` requires a cross-version extension. Element `BodyStructure.includedStructure.qualifier` is mapped to FHIR STU3 element `BodySite.qualifier` as `RelatedTo`."/> <requirements value="Element `BodyStructure.includedStructure.qualifier` is part of an existing definition because parent element `BodyStructure.includedStructure` requires a cross-version extension. Element `BodyStructure.includedStructure.qualifier` is mapped to FHIR STU3 element `BodySite.qualifier` as `RelatedTo`."/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> </element> <element id="Extension.extension:qualifier.id"> <path value="Extension.extension.id"/> <representation value="xmlAttr"/> <short value="xml:id (or equivalent in JSON)"/> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:qualifier.extension"> <path value="Extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <rules value="open"/> </slicing> <short value="Additional Content defined by implementations"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:qualifier.url"> <path value="Extension.extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <code value="uri"/> </type> <fixedUri value="qualifier"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:qualifier.value[x]"> <path value="Extension.extension.value[x]"/> <short value="Code that represents the included structure qualifier"/> <definition value="Code that represents the included structure qualifier."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.url"> <path value="Extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <code value="uri"/> </type> <fixedUri value="http://hl7.org/fhir/5.0/StructureDefinition/extension-BodyStructure.includedStructure"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.value[x]"> <path value="Extension.value[x]"/> <short value="Value of extension"/> <definition value="Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list)."/> <min value="0"/> <max value="0"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="base64Binary"/> </type> <type> <code value="boolean"/> </type> <type> <code value="code"/> </type> <type> <code value="date"/> </type> <type> <code value="dateTime"/> </type> <type> <code value="decimal"/> </type> <type> <code value="id"/> </type> <type> <code value="instant"/> </type> <type> <code value="integer"/> </type> <type> <code value="markdown"/> </type> <type> <code value="oid"/> </type> <type> <code value="positiveInt"/> </type> <type> <code value="string"/> </type> <type> <code value="time"/> </type> <type> <code value="unsignedInt"/> </type> <type> <code value="uri"/> </type> <type> <code value="Address"/> </type> <type> <code value="Age"/> </type> <type> <code value="Annotation"/> </type> <type> <code value="Attachment"/> </type> <type> <code value="CodeableConcept"/> </type> <type> <code value="Coding"/> </type> <type> <code value="ContactPoint"/> </type> <type> <code value="Count"/> </type> <type> <code value="Distance"/> </type> <type> <code value="Duration"/> </type> <type> <code value="HumanName"/> </type> <type> <code value="Identifier"/> </type> <type> <code value="Money"/> </type> <type> <code value="Period"/> </type> <type> <code value="Quantity"/> </type> <type> <code value="Range"/> </type> <type> <code value="Ratio"/> </type> <type> <code value="Reference"/> </type> <type> <code value="SampledData"/> </type> <type> <code value="Signature"/> </type> <type> <code value="Timing"/> </type> <type> <code value="Meta"/> </type> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> </snapshot> <differential> <element id="Extension"> <path value="Extension"/> <short value="R5: Included anatomic location(s) (new)"/> <definition value="R5: `BodyStructure.includedStructure` (new:BackboneElement)"/> <comment value="Element `BodyStructure.includedStructure` has a context of BodySite based on following the parent source element upwards and mapping to `BodySite`. Element `BodyStructure.includedStructure` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="1"/> <max value="*"/> <base> <path value="Extension"/> <min value="0"/> <max value="*"/> </base> <isModifier value="false"/> </element> <element id="Extension.extension"> <path value="Extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <ordered value="false"/> <rules value="open"/> </slicing> <min value="1"/> <max value="*"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:structure"> <path value="Extension.extension"/> <sliceName value="structure"/> <short value="R5: Code that represents the included structure (new)"/> <definition value="R5: `BodyStructure.includedStructure.structure` (new:CodeableConcept)"/> <comment value="Element `BodyStructure.includedStructure.structure` is part of an existing definition because parent element `BodyStructure.includedStructure` requires a cross-version extension. Element `BodyStructure.includedStructure.structure` has a context of BodySite based on following the parent source element upwards and mapping to `BodySite`. Element `BodyStructure.includedStructure.structure` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `BodyStructure.includedStructure.structure` is part of an existing definition because parent element `BodyStructure.includedStructure` requires a cross-version extension. Element `BodyStructure.includedStructure.structure` has a context of BodySite based on following the parent source element upwards and mapping to `BodySite`. Element `BodyStructure.includedStructure.structure` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:structure.url"> <path value="Extension.extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="structure"/> </element> <element id="Extension.extension:structure.value[x]"> <path value="Extension.extension.value[x]"/> <short value="Code that represents the included structure"/> <definition value="Code that represents the included structure."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> </element> <element id="Extension.extension:laterality"> <path value="Extension.extension"/> <sliceName value="laterality"/> <short value="R5: Code that represents the included structure laterality (new)"/> <definition value="R5: `BodyStructure.includedStructure.laterality` (new:CodeableConcept)"/> <comment value="Element `BodyStructure.includedStructure.laterality` is part of an existing definition because parent element `BodyStructure.includedStructure` requires a cross-version extension. Element `BodyStructure.includedStructure.laterality` has a context of BodySite based on following the parent source element upwards and mapping to `BodySite`. Element `BodyStructure.includedStructure.laterality` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `BodyStructure.includedStructure.laterality` is part of an existing definition because parent element `BodyStructure.includedStructure` requires a cross-version extension. Element `BodyStructure.includedStructure.laterality` has a context of BodySite based on following the parent source element upwards and mapping to `BodySite`. Element `BodyStructure.includedStructure.laterality` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:laterality.url"> <path value="Extension.extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="laterality"/> </element> <element id="Extension.extension:laterality.value[x]"> <path value="Extension.extension.value[x]"/> <short value="Code that represents the included structure laterality"/> <definition value="Code that represents the included structure laterality."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> </element> <element id="Extension.extension:bodyLandmarkOrientation"> <path value="Extension.extension"/> <sliceName value="bodyLandmarkOrientation"/> <short value="R5: Landmark relative location (new)"/> <definition value="R5: `BodyStructure.includedStructure.bodyLandmarkOrientation` (new:BackboneElement)"/> <comment value="Element `BodyStructure.includedStructure.bodyLandmarkOrientation` is part of an existing definition because parent element `BodyStructure.includedStructure` requires a cross-version extension. Element `BodyStructure.includedStructure.bodyLandmarkOrientation` has a context of BodySite based on following the parent source element upwards and mapping to `BodySite`. Element `BodyStructure.includedStructure.bodyLandmarkOrientation` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `BodyStructure.includedStructure.bodyLandmarkOrientation` is part of an existing definition because parent element `BodyStructure.includedStructure` requires a cross-version extension. Element `BodyStructure.includedStructure.bodyLandmarkOrientation` has a context of BodySite based on following the parent source element upwards and mapping to `BodySite`. Element `BodyStructure.includedStructure.bodyLandmarkOrientation` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="*"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension"> <path value="Extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <ordered value="false"/> <rules value="open"/> </slicing> <min value="0"/> <max value="*"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:landmarkDescription"> <path value="Extension.extension.extension"/> <sliceName value="landmarkDescription"/> <short value="R5: Body ]andmark description (new)"/> <definition value="R5: `BodyStructure.includedStructure.bodyLandmarkOrientation.landmarkDescription` (new:CodeableConcept)"/> <comment value="Element `BodyStructure.includedStructure.bodyLandmarkOrientation.landmarkDescription` is part of an existing definition because parent element `BodyStructure.includedStructure.bodyLandmarkOrientation` requires a cross-version extension. Element `BodyStructure.includedStructure.bodyLandmarkOrientation.landmarkDescription` has a context of BodySite based on following the parent source element upwards and mapping to `BodySite`. Element `BodyStructure.includedStructure.bodyLandmarkOrientation.landmarkDescription` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `BodyStructure.includedStructure.bodyLandmarkOrientation.landmarkDescription` is part of an existing definition because parent element `BodyStructure.includedStructure.bodyLandmarkOrientation` requires a cross-version extension. Element `BodyStructure.includedStructure.bodyLandmarkOrientation.landmarkDescription` has a context of BodySite based on following the parent source element upwards and mapping to `BodySite`. Element `BodyStructure.includedStructure.bodyLandmarkOrientation.landmarkDescription` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="*"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:landmarkDescription.url"> <path value="Extension.extension.extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="landmarkDescription"/> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:landmarkDescription.value[x]"> <path value="Extension.extension.extension.value[x]"/> <short value="Body ]andmark description"/> <definition value="A description of a landmark on the body used as a reference to locate something else."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:clockFacePosition"> <path value="Extension.extension.extension"/> <sliceName value="clockFacePosition"/> <short value="R5: Clockface orientation (new)"/> <definition value="R5: `BodyStructure.includedStructure.bodyLandmarkOrientation.clockFacePosition` (new:CodeableConcept)"/> <comment value="Element `BodyStructure.includedStructure.bodyLandmarkOrientation.clockFacePosition` is part of an existing definition because parent element `BodyStructure.includedStructure.bodyLandmarkOrientation` requires a cross-version extension. Element `BodyStructure.includedStructure.bodyLandmarkOrientation.clockFacePosition` has a context of BodySite based on following the parent source element upwards and mapping to `BodySite`. Element `BodyStructure.includedStructure.bodyLandmarkOrientation.clockFacePosition` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `BodyStructure.includedStructure.bodyLandmarkOrientation.clockFacePosition` is part of an existing definition because parent element `BodyStructure.includedStructure.bodyLandmarkOrientation` requires a cross-version extension. Element `BodyStructure.includedStructure.bodyLandmarkOrientation.clockFacePosition` has a context of BodySite based on following the parent source element upwards and mapping to `BodySite`. Element `BodyStructure.includedStructure.bodyLandmarkOrientation.clockFacePosition` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="*"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:clockFacePosition.url"> <path value="Extension.extension.extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="clockFacePosition"/> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:clockFacePosition.value[x]"> <path value="Extension.extension.extension.value[x]"/> <short value="Clockface orientation"/> <definition value="An description of the direction away from a landmark something is located based on a radial clock dial."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:distanceFromLandmark"> <path value="Extension.extension.extension"/> <sliceName value="distanceFromLandmark"/> <short value="R5: Landmark relative location (new)"/> <definition value="R5: `BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark` (new:BackboneElement)"/> <comment value="Element `BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark` is part of an existing definition because parent element `BodyStructure.includedStructure.bodyLandmarkOrientation` requires a cross-version extension. Element `BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark` has a context of BodySite based on following the parent source element upwards and mapping to `BodySite`. Element `BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark` is part of an existing definition because parent element `BodyStructure.includedStructure.bodyLandmarkOrientation` requires a cross-version extension. Element `BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark` has a context of BodySite based on following the parent source element upwards and mapping to `BodySite`. Element `BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="*"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:distanceFromLandmark.extension"> <path value="Extension.extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <ordered value="false"/> <rules value="open"/> </slicing> <min value="0"/> <max value="*"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:distanceFromLandmark.extension:device"> <path value="Extension.extension.extension.extension"/> <sliceName value="device"/> <short value="R5: Measurement device (new)"/> <definition value="R5: `BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark.device` (new:CodeableReference(Device))"/> <comment value="Element `BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark.device` is part of an existing definition because parent element `BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark` requires a cross-version extension. Element `BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark.device` has a context of BodySite based on following the parent source element upwards and mapping to `BodySite`. Element `BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark.device` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark.device` is part of an existing definition because parent element `BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark` requires a cross-version extension. Element `BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark.device` has a context of BodySite based on following the parent source element upwards and mapping to `BodySite`. Element `BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark.device` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="*"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:distanceFromLandmark.extension:device.extension"> <path value="Extension.extension.extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <ordered value="false"/> <rules value="open"/> </slicing> <min value="0"/> <max value="*"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:distanceFromLandmark.extension:device.extension:_datatype"> <path value="Extension.extension.extension.extension.extension"/> <sliceName value="_datatype"/> <short value="DataType slice for a FHIR R5 `CodeableReference` value"/> <definition value="Slice to indicate the presence of a R5 `CodeableReference` in FHIR STU3"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:distanceFromLandmark.extension:device.extension:_datatype.url"> <path value="Extension.extension.extension.extension.extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="http://hl7.org/fhir/StructureDefinition/_datatype"/> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:distanceFromLandmark.extension:device.extension:_datatype.value[x]"> <path value="Extension.extension.extension.extension.extension.value[x]"/> <comment value="Must be: CodeableReference"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <fixedString value="CodeableReference"/> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:distanceFromLandmark.extension:device.extension:concept"> <path value="Extension.extension.extension.extension.extension"/> <sliceName value="concept"/> <short value="R5: Reference to a concept (by class)"/> <definition value="R5: `CodeableReference.concept`"/> <comment value="Element `CodeableReference.concept` is mapped to FHIR STU3 element `CodeableConcept` as `Equivalent`."/> <requirements value="Element `CodeableReference.concept` is mapped to FHIR STU3 element `CodeableConcept` as `Equivalent`."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:distanceFromLandmark.extension:device.extension:concept.url"> <path value="Extension.extension.extension.extension.extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="concept"/> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:distanceFromLandmark.extension:device.extension:concept.value[x]"> <path value="Extension.extension.extension.extension.extension.value[x]"/> <short value="Reference to a concept (by class)"/> <definition value="A reference to a concept - e.g. the information is identified by its general class to the degree of precision found in the terminology."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:distanceFromLandmark.extension:device.extension:reference"> <path value="Extension.extension.extension.extension.extension"/> <sliceName value="reference"/> <short value="R5: Reference to a resource (by instance)"/> <definition value="R5: `CodeableReference.reference`"/> <comment value="Element `CodeableReference.reference` is mapped to FHIR STU3 element `Reference` as `Equivalent`."/> <requirements value="Element `CodeableReference.reference` is mapped to FHIR STU3 element `Reference` as `Equivalent`."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:distanceFromLandmark.extension:device.extension:reference.url"> <path value="Extension.extension.extension.extension.extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="reference"/> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:distanceFromLandmark.extension:device.extension:reference.value[x]"> <path value="Extension.extension.extension.extension.extension.value[x]"/> <short value="Reference to a resource (by instance)"/> <definition value="A reference to a resource the provides exact details about the information being referenced."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="Reference"/> <targetProfile value="http://hl7.org/fhir/5.0/StructureDefinition/profile-Device|0.1.0"/> </type> <type> <code value="Reference"/> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Device"/> </type> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:distanceFromLandmark.extension:device.url"> <path value="Extension.extension.extension.extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="device"/> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:distanceFromLandmark.extension:device.value[x]"> <path value="Extension.extension.extension.extension.value[x]"/> <min value="0"/> <max value="0"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:distanceFromLandmark.extension:value"> <path value="Extension.extension.extension.extension"/> <sliceName value="value"/> <short value="R5: Measured distance from body landmark (new)"/> <definition value="R5: `BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark.value` (new:Quantity)"/> <comment value="Element `BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark.value` is part of an existing definition because parent element `BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark` requires a cross-version extension. Element `BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark.value` has a context of BodySite based on following the parent source element upwards and mapping to `BodySite`. Element `BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark.value` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark.value` is part of an existing definition because parent element `BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark` requires a cross-version extension. Element `BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark.value` has a context of BodySite based on following the parent source element upwards and mapping to `BodySite`. Element `BodyStructure.includedStructure.bodyLandmarkOrientation.distanceFromLandmark.value` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="*"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:distanceFromLandmark.extension:value.url"> <path value="Extension.extension.extension.extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="value"/> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:distanceFromLandmark.extension:value.value[x]"> <path value="Extension.extension.extension.extension.value[x]"/> <short value="Measured distance from body landmark"/> <definition value="The measured distance (e.g., in cm) from a body landmark."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="Quantity"/> </type> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:distanceFromLandmark.url"> <path value="Extension.extension.extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="distanceFromLandmark"/> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:distanceFromLandmark.value[x]"> <path value="Extension.extension.extension.value[x]"/> <min value="0"/> <max value="0"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:surfaceOrientation"> <path value="Extension.extension.extension"/> <sliceName value="surfaceOrientation"/> <short value="R5: Relative landmark surface orientation (new)"/> <definition value="R5: `BodyStructure.includedStructure.bodyLandmarkOrientation.surfaceOrientation` (new:CodeableConcept)"/> <comment value="Element `BodyStructure.includedStructure.bodyLandmarkOrientation.surfaceOrientation` is part of an existing definition because parent element `BodyStructure.includedStructure.bodyLandmarkOrientation` requires a cross-version extension. Element `BodyStructure.includedStructure.bodyLandmarkOrientation.surfaceOrientation` has a context of BodySite based on following the parent source element upwards and mapping to `BodySite`. Element `BodyStructure.includedStructure.bodyLandmarkOrientation.surfaceOrientation` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `BodyStructure.includedStructure.bodyLandmarkOrientation.surfaceOrientation` is part of an existing definition because parent element `BodyStructure.includedStructure.bodyLandmarkOrientation` requires a cross-version extension. Element `BodyStructure.includedStructure.bodyLandmarkOrientation.surfaceOrientation` has a context of BodySite based on following the parent source element upwards and mapping to `BodySite`. Element `BodyStructure.includedStructure.bodyLandmarkOrientation.surfaceOrientation` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="*"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:surfaceOrientation.url"> <path value="Extension.extension.extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="surfaceOrientation"/> </element> <element id="Extension.extension:bodyLandmarkOrientation.extension:surfaceOrientation.value[x]"> <path value="Extension.extension.extension.value[x]"/> <short value="Relative landmark surface orientation"/> <definition value="The surface area a body location is in relation to a landmark."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> </element> <element id="Extension.extension:bodyLandmarkOrientation.url"> <path value="Extension.extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="bodyLandmarkOrientation"/> </element> <element id="Extension.extension:bodyLandmarkOrientation.value[x]"> <path value="Extension.extension.value[x]"/> <min value="0"/> <max value="0"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> </element> <element id="Extension.extension:spatialReference"> <path value="Extension.extension"/> <sliceName value="spatialReference"/> <short value="R5: Cartesian reference for structure (new)"/> <definition value="R5: `BodyStructure.includedStructure.spatialReference` (new:Reference(ImagingSelection))"/> <comment value="Element `BodyStructure.includedStructure.spatialReference` is part of an existing definition because parent element `BodyStructure.includedStructure` requires a cross-version extension. Element `BodyStructure.includedStructure.spatialReference` has a context of BodySite based on following the parent source element upwards and mapping to `BodySite`. Element `BodyStructure.includedStructure.spatialReference` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `BodyStructure.includedStructure.spatialReference` is part of an existing definition because parent element `BodyStructure.includedStructure` requires a cross-version extension. Element `BodyStructure.includedStructure.spatialReference` has a context of BodySite based on following the parent source element upwards and mapping to `BodySite`. Element `BodyStructure.includedStructure.spatialReference` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="*"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:spatialReference.url"> <path value="Extension.extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="spatialReference"/> </element> <element id="Extension.extension:spatialReference.value[x]"> <path value="Extension.extension.value[x]"/> <short value="Cartesian reference for structure"/> <definition value="XY or XYZ-coordinate orientation for structure."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="Reference"/> <targetProfile value="http://hl7.org/fhir/5.0/StructureDefinition/profile-ImagingSelection|0.1.0"/> </type> <type> <code value="Reference"/> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Basic"/> </type> </element> <element id="Extension.extension:qualifier"> <path value="Extension.extension"/> <sliceName value="qualifier"/> <short value="R5: Code that represents the included structure qualifier"/> <definition value="R5: `BodyStructure.includedStructure.qualifier`"/> <comment value="Element `BodyStructure.includedStructure.qualifier` is part of an existing definition because parent element `BodyStructure.includedStructure` requires a cross-version extension. Element `BodyStructure.includedStructure.qualifier` is mapped to FHIR STU3 element `BodySite.qualifier` as `RelatedTo`."/> <requirements value="Element `BodyStructure.includedStructure.qualifier` is part of an existing definition because parent element `BodyStructure.includedStructure` requires a cross-version extension. Element `BodyStructure.includedStructure.qualifier` is mapped to FHIR STU3 element `BodySite.qualifier` as `RelatedTo`."/> <min value="0"/> <max value="*"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:qualifier.url"> <path value="Extension.extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="qualifier"/> </element> <element id="Extension.extension:qualifier.value[x]"> <path value="Extension.extension.value[x]"/> <short value="Code that represents the included structure qualifier"/> <definition value="Code that represents the included structure qualifier."/> <min value="0"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> </element> <element id="Extension.url"> <path value="Extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="http://hl7.org/fhir/5.0/StructureDefinition/extension-BodyStructure.includedStructure"/> </element> <element id="Extension.value[x]"> <path value="Extension.value[x]"/> <min value="0"/> <max value="0"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> </element> </differential> </StructureDefinition>

Generated Narrative: StructureDefinition ext-R5-BodyStructure.includedStructure

Name	Card.	Type	Description & Constraints
Extension	1..*	Extension	R5: Included anatomic location(s) (new)
Slices for extension	1..*	Extension	Extension Slice: Unordered, Open by value:url
extension:structure	1..1	Extension	R5: Code that represents the included structure (new)
url	1..1	uri	"structure"
value[x]	1..1	CodeableConcept	Code that represents the included structure
extension:laterality	0..1	Extension	R5: Code that represents the included structure laterality (new)
url	1..1	uri	"laterality"
value[x]	0..1	CodeableConcept	Code that represents the included structure laterality
extension:bodyLandmarkOrientation	0..*	Extension	R5: Landmark relative location (new)
Slices for extension	0..*	Extension	Extension Slice: Unordered, Open by value:url
extension:landmarkDescription	0..*	Extension	R5: Body ]andmark description (new)
url	1..1	uri	"landmarkDescription"
value[x]	0..1	CodeableConcept	Body ]andmark description
extension:clockFacePosition	0..*	Extension	R5: Clockface orientation (new)
url	1..1	uri	"clockFacePosition"
value[x]	0..1	CodeableConcept	Clockface orientation
extension:distanceFromLandmark	0..*	Extension	R5: Landmark relative location (new)
Slices for extension	0..*	Extension	Extension Slice: Unordered, Open by value:url
extension:device	0..*	Extension	R5: Measurement device (new)
Slices for extension	0..*	Extension	Extension Slice: Unordered, Open by value:url
extension:_datatype	1..1	Extension	DataType slice for a FHIR R5 `CodeableReference` value
url	1..1	uri	"http://hl7.org/fhir/StructureDefinition/_datatype"
value[x]	1..1	string	Value of extension Fixed Value: CodeableReference
extension:concept	0..1	Extension	R5: Reference to a concept (by class)
url	1..1	uri	"concept"
value[x]	0..1	CodeableConcept	Reference to a concept (by class)
extension:reference	0..1	Extension	R5: Reference to a resource (by instance)
url	1..1	uri	"reference"
value[x]	0..1	Reference(Cross-version Profile for R5.Device for use in FHIR STU3(0.1.0) \| Device)	Reference to a resource (by instance)
url	1..1	uri	"device"
value[x]	0..0		Value of extension
extension:value	0..*	Extension	R5: Measured distance from body landmark (new)
url	1..1	uri	"value"
value[x]	0..1	Quantity	Measured distance from body landmark
url	1..1	uri	"distanceFromLandmark"
value[x]	0..0		Value of extension
extension:surfaceOrientation	0..*	Extension	R5: Relative landmark surface orientation (new)
url	1..1	uri	"surfaceOrientation"
value[x]	0..1	CodeableConcept	Relative landmark surface orientation
url	1..1	uri	"bodyLandmarkOrientation"
value[x]	0..0		Value of extension
extension:spatialReference	0..*	Extension	R5: Cartesian reference for structure (new)
url	1..1	uri	"spatialReference"
value[x]	0..1	Reference(Cross-version Profile for R5.ImagingSelection for use in FHIR STU3(0.1.0) \| Basic)	Cartesian reference for structure
extension:qualifier	0..*	Extension	R5: Code that represents the included structure qualifier
url	1..1	uri	"qualifier"
value[x]	0..1	CodeableConcept	Code that represents the included structure qualifier
url	1..1	uri	"http://hl7.org/fhir/5.0/StructureDefinition/extension-BodyStructure.includedStructure"
value[x]	0..0		Value of extension
Documentation for this format