ExtensionAccount_Balance - Definitions - Extensions for Using Data Elements from FHIR R5 in FHIR STU3 v0.1.0

Extensions for Using Data Elements from FHIR R5 in FHIR STU3 - Downloaded Version null See the Directory of published versions

Extension: ExtensionAccount_Balance - Detailed Descriptions

Page standards status: Trial-use

Maturity Level: 0

Definitions for the ext-R5-Account.balance extension.

Key Elements Table
Differential Elements Table
Snapshot Elements Table

Guidance on how to interpret the contents of this table can be foundhere

0. Extension
Definition	R5: `Account.balance` (new:BackboneElement) Optional Extension Element - found in all resources.
Short	R5: Calculated account balance(s) (new)Optional Extensions Element
Comments	Element `Account.balance` has a context of Account based on following the parent source element upwards and mapping to `Account`. Element `Account.balance` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..* This element is affected by the following invariants: ele-1
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() \| (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
2. Extension.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	10..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
4. Extension.extension:aggregate
Slice Name	aggregate
Definition	R5: `Account.balance.aggregate` (new:CodeableConcept)
Short	R5: Who is expected to pay this part of the balance (new)Additional Content defined by implementations
Comments	Element `Account.balance.aggregate` is part of an existing definition because parent element `Account.balance` requires a cross-version extension. Element `Account.balance.aggregate` has a context of Account based on following the parent source element upwards and mapping to `Account`. Element `Account.balance.aggregate` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1*
Type	Extension
Requirements	Element `Account.balance.aggregate` is part of an existing definition because parent element `Account.balance` requires a cross-version extension. Element `Account.balance.aggregate` has a context of Account based on following the parent source element upwards and mapping to `Account`. Element `Account.balance.aggregate` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
6. Extension.extension:aggregate.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`aggregate`
8. Extension.extension:aggregate.value[x]
Definition	Who is expected to pay this part of the balance. Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Who is expected to pay this part of the balanceValue of extension
Control	0..1
Binding	Unless not suitable, these codes SHALL be taken from For codes, see R5AccountAggregateForR3 (0.1.0) (extensible to `http://hl7.org/fhir/uv/xver/ValueSet/R5-account-aggregate-for-R3\|0.1.0`) Indicates the balance was outstanding at the given age.
Type	CodeableConcept, date, dateTime, Meta, code, string, Address, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Quantity, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
10. Extension.extension:term
Slice Name	term
Definition	R5: `Account.balance.term` (new:CodeableConcept)
Short	R5: current \| 30 \| 60 \| 90 \| 120 (new)Additional Content defined by implementations
Comments	Element `Account.balance.term` is part of an existing definition because parent element `Account.balance` requires a cross-version extension. Element `Account.balance.term` has a context of Account based on following the parent source element upwards and mapping to `Account`. Element `Account.balance.term` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1*
Type	Extension
Requirements	Element `Account.balance.term` is part of an existing definition because parent element `Account.balance` requires a cross-version extension. Element `Account.balance.term` has a context of Account based on following the parent source element upwards and mapping to `Account`. Element `Account.balance.term` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
12. Extension.extension:term.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`term`
14. Extension.extension:term.value[x]
Definition	The term of the account balances - The balance value is the amount that was outstanding for this age. Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	current \| 30 \| 60 \| 90 \| 120Value of extension
Control	0..1
Binding	Unless not suitable, these codes SHALL be taken from For codes, see R5AccountBalanceTermForR3 (0.1.0) (extensible to `http://hl7.org/fhir/uv/xver/ValueSet/R5-account-balance-term-for-R3\|0.1.0`) Indicates the balance was outstanding at the given age.
Type	CodeableConcept, date, dateTime, Meta, code, string, Address, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Quantity, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
16. Extension.extension:estimate
Slice Name	estimate
Definition	R5: `Account.balance.estimate` (new:boolean)
Short	R5: Estimated balance (new)Additional Content defined by implementations
Comments	Element `Account.balance.estimate` is part of an existing definition because parent element `Account.balance` requires a cross-version extension. Element `Account.balance.estimate` has a context of Account based on following the parent source element upwards and mapping to `Account`. Element `Account.balance.estimate` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1*
Type	Extension
Requirements	Element `Account.balance.estimate` is part of an existing definition because parent element `Account.balance` requires a cross-version extension. Element `Account.balance.estimate` has a context of Account based on following the parent source element upwards and mapping to `Account`. Element `Account.balance.estimate` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
18. Extension.extension:estimate.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`estimate`
20. Extension.extension:estimate.value[x]
Definition	The amount is only an estimated value - this is likely common for `current` term balances, but not with known terms (that were generated by a backend process). Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Estimated balanceValue of extension
Control	0..1
Type	boolean, date, dateTime, Meta, code, string, Address, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Quantity, Duration, Range, uri, Annotation, base64Binary, Signature, unsignedInt, time, Timing, decimal, CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
22. Extension.extension:amount
Slice Name	amount
Definition	R5: `Account.balance.amount` (new:Money)
Short	R5: Calculated amount (new)Additional Content defined by implementations
Comments	Element `Account.balance.amount` is part of an existing definition because parent element `Account.balance` requires a cross-version extension. Element `Account.balance.amount` has a context of Account based on following the parent source element upwards and mapping to `Account`. Element `Account.balance.amount` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	10..1*
Type	Extension
Requirements	Element `Account.balance.amount` is part of an existing definition because parent element `Account.balance` requires a cross-version extension. Element `Account.balance.amount` has a context of Account based on following the parent source element upwards and mapping to `Account`. Element `Account.balance.amount` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
24. Extension.extension:amount.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`amount`
26. Extension.extension:amount.value[x]
Definition	The actual balance value calculated for the age defined in the term property. Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Calculated amountValue of extension
Control	10..1
Type	Money, date, dateTime, Meta, code, string, Address, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Quantity, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal, CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
28. Extension.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`http://hl7.org/fhir/5.0/StructureDefinition/extension-Account.balance`
30. Extension.value[x]
Definition	Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Value of extension
Control	0..01
Type	Choice of: base64Binary, boolean, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, Meta
Primitive Value	This primitive element may be present, or absent, or replaced by an extension

Guidance on how to interpret the contents of this table can be foundhere

0. Extension
Definition	R5: `Account.balance` (new:BackboneElement)
Short	R5: Calculated account balance(s) (new)
Comments	Element `Account.balance` has a context of Account based on following the parent source element upwards and mapping to `Account`. Element `Account.balance` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..*
Is Modifier	false
2. Extension.extension
Control	1..*
Slicing	This element introduces a set of slices on `Extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
4. Extension.extension:aggregate
Slice Name	aggregate
Definition	R5: `Account.balance.aggregate` (new:CodeableConcept)
Short	R5: Who is expected to pay this part of the balance (new)
Comments	Element `Account.balance.aggregate` is part of an existing definition because parent element `Account.balance` requires a cross-version extension. Element `Account.balance.aggregate` has a context of Account based on following the parent source element upwards and mapping to `Account`. Element `Account.balance.aggregate` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Requirements	Element `Account.balance.aggregate` is part of an existing definition because parent element `Account.balance` requires a cross-version extension. Element `Account.balance.aggregate` has a context of Account based on following the parent source element upwards and mapping to `Account`. Element `Account.balance.aggregate` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
6. Extension.extension:aggregate.url
Control	1..1
Fixed Value	`aggregate`
8. Extension.extension:aggregate.value[x]
Definition	Who is expected to pay this part of the balance.
Short	Who is expected to pay this part of the balance
Control	0..1
Binding	Unless not suitable, these codes SHALL be taken from R5AccountAggregateForR3 (0.1.0) (extensible to `http://hl7.org/fhir/uv/xver/ValueSet/R5-account-aggregate-for-R3\|0.1.0`) Indicates the balance was outstanding at the given age.
Type	CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
10. Extension.extension:term
Slice Name	term
Definition	R5: `Account.balance.term` (new:CodeableConcept)
Short	R5: current \| 30 \| 60 \| 90 \| 120 (new)
Comments	Element `Account.balance.term` is part of an existing definition because parent element `Account.balance` requires a cross-version extension. Element `Account.balance.term` has a context of Account based on following the parent source element upwards and mapping to `Account`. Element `Account.balance.term` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Requirements	Element `Account.balance.term` is part of an existing definition because parent element `Account.balance` requires a cross-version extension. Element `Account.balance.term` has a context of Account based on following the parent source element upwards and mapping to `Account`. Element `Account.balance.term` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
12. Extension.extension:term.url
Control	1..1
Fixed Value	`term`
14. Extension.extension:term.value[x]
Definition	The term of the account balances - The balance value is the amount that was outstanding for this age.
Short	current \| 30 \| 60 \| 90 \| 120
Control	0..1
Binding	Unless not suitable, these codes SHALL be taken from R5AccountBalanceTermForR3 (0.1.0) (extensible to `http://hl7.org/fhir/uv/xver/ValueSet/R5-account-balance-term-for-R3\|0.1.0`) Indicates the balance was outstanding at the given age.
Type	CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
16. Extension.extension:estimate
Slice Name	estimate
Definition	R5: `Account.balance.estimate` (new:boolean)
Short	R5: Estimated balance (new)
Comments	Element `Account.balance.estimate` is part of an existing definition because parent element `Account.balance` requires a cross-version extension. Element `Account.balance.estimate` has a context of Account based on following the parent source element upwards and mapping to `Account`. Element `Account.balance.estimate` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Requirements	Element `Account.balance.estimate` is part of an existing definition because parent element `Account.balance` requires a cross-version extension. Element `Account.balance.estimate` has a context of Account based on following the parent source element upwards and mapping to `Account`. Element `Account.balance.estimate` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
18. Extension.extension:estimate.url
Control	1..1
Fixed Value	`estimate`
20. Extension.extension:estimate.value[x]
Definition	The amount is only an estimated value - this is likely common for `current` term balances, but not with known terms (that were generated by a backend process).
Short	Estimated balance
Control	0..1
Type	boolean
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
22. Extension.extension:amount
Slice Name	amount
Definition	R5: `Account.balance.amount` (new:Money)
Short	R5: Calculated amount (new)
Comments	Element `Account.balance.amount` is part of an existing definition because parent element `Account.balance` requires a cross-version extension. Element `Account.balance.amount` has a context of Account based on following the parent source element upwards and mapping to `Account`. Element `Account.balance.amount` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	1..1
Requirements	Element `Account.balance.amount` is part of an existing definition because parent element `Account.balance` requires a cross-version extension. Element `Account.balance.amount` has a context of Account based on following the parent source element upwards and mapping to `Account`. Element `Account.balance.amount` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
24. Extension.extension:amount.url
Control	1..1
Fixed Value	`amount`
26. Extension.extension:amount.value[x]
Definition	The actual balance value calculated for the age defined in the term property.
Short	Calculated amount
Control	1..1
Type	Money
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
28. Extension.url
Control	1..1
Fixed Value	`http://hl7.org/fhir/5.0/StructureDefinition/extension-Account.balance`
30. Extension.value[x]
Control	0..0

Guidance on how to interpret the contents of this table can be foundhere

0. Extension
Definition	R5: `Account.balance` (new:BackboneElement)
Short	R5: Calculated account balance(s) (new)
Comments	Element `Account.balance` has a context of Account based on following the parent source element upwards and mapping to `Account`. Element `Account.balance` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..* This element is affected by the following invariants: ele-1
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
2. Extension.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
4. Extension.extension
Definition	An Extension
Short	Extension
Control	1..*
Type	Extension
Slicing	This element introduces a set of slices on `Extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
6. Extension.extension:aggregate
Slice Name	aggregate
Definition	R5: `Account.balance.aggregate` (new:CodeableConcept)
Short	R5: Who is expected to pay this part of the balance (new)
Comments	Element `Account.balance.aggregate` is part of an existing definition because parent element `Account.balance` requires a cross-version extension. Element `Account.balance.aggregate` has a context of Account based on following the parent source element upwards and mapping to `Account`. Element `Account.balance.aggregate` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension
Requirements	Element `Account.balance.aggregate` is part of an existing definition because parent element `Account.balance` requires a cross-version extension. Element `Account.balance.aggregate` has a context of Account based on following the parent source element upwards and mapping to `Account`. Element `Account.balance.aggregate` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
8. Extension.extension:aggregate.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
10. Extension.extension:aggregate.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
12. Extension.extension:aggregate.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`aggregate`
14. Extension.extension:aggregate.value[x]
Definition	Who is expected to pay this part of the balance.
Short	Who is expected to pay this part of the balance
Control	0..1
Binding	Unless not suitable, these codes SHALL be taken from R5AccountAggregateForR3 (0.1.0) (extensible to `http://hl7.org/fhir/uv/xver/ValueSet/R5-account-aggregate-for-R3\|0.1.0`) Indicates the balance was outstanding at the given age.
Type	CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
16. Extension.extension:term
Slice Name	term
Definition	R5: `Account.balance.term` (new:CodeableConcept)
Short	R5: current \| 30 \| 60 \| 90 \| 120 (new)
Comments	Element `Account.balance.term` is part of an existing definition because parent element `Account.balance` requires a cross-version extension. Element `Account.balance.term` has a context of Account based on following the parent source element upwards and mapping to `Account`. Element `Account.balance.term` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension
Requirements	Element `Account.balance.term` is part of an existing definition because parent element `Account.balance` requires a cross-version extension. Element `Account.balance.term` has a context of Account based on following the parent source element upwards and mapping to `Account`. Element `Account.balance.term` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
18. Extension.extension:term.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
20. Extension.extension:term.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
22. Extension.extension:term.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`term`
24. Extension.extension:term.value[x]
Definition	The term of the account balances - The balance value is the amount that was outstanding for this age.
Short	current \| 30 \| 60 \| 90 \| 120
Control	0..1
Binding	Unless not suitable, these codes SHALL be taken from R5AccountBalanceTermForR3 (0.1.0) (extensible to `http://hl7.org/fhir/uv/xver/ValueSet/R5-account-balance-term-for-R3\|0.1.0`) Indicates the balance was outstanding at the given age.
Type	CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
26. Extension.extension:estimate
Slice Name	estimate
Definition	R5: `Account.balance.estimate` (new:boolean)
Short	R5: Estimated balance (new)
Comments	Element `Account.balance.estimate` is part of an existing definition because parent element `Account.balance` requires a cross-version extension. Element `Account.balance.estimate` has a context of Account based on following the parent source element upwards and mapping to `Account`. Element `Account.balance.estimate` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension
Requirements	Element `Account.balance.estimate` is part of an existing definition because parent element `Account.balance` requires a cross-version extension. Element `Account.balance.estimate` has a context of Account based on following the parent source element upwards and mapping to `Account`. Element `Account.balance.estimate` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
28. Extension.extension:estimate.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
30. Extension.extension:estimate.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
32. Extension.extension:estimate.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`estimate`
34. Extension.extension:estimate.value[x]
Definition	The amount is only an estimated value - this is likely common for `current` term balances, but not with known terms (that were generated by a backend process).
Short	Estimated balance
Control	0..1
Type	boolean
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
36. Extension.extension:amount
Slice Name	amount
Definition	R5: `Account.balance.amount` (new:Money)
Short	R5: Calculated amount (new)
Comments	Element `Account.balance.amount` is part of an existing definition because parent element `Account.balance` requires a cross-version extension. Element `Account.balance.amount` has a context of Account based on following the parent source element upwards and mapping to `Account`. Element `Account.balance.amount` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	1..1
Type	Extension
Requirements	Element `Account.balance.amount` is part of an existing definition because parent element `Account.balance` requires a cross-version extension. Element `Account.balance.amount` has a context of Account based on following the parent source element upwards and mapping to `Account`. Element `Account.balance.amount` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
38. Extension.extension:amount.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
40. Extension.extension:amount.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
42. Extension.extension:amount.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`amount`
44. Extension.extension:amount.value[x]
Definition	The actual balance value calculated for the age defined in the term property.
Short	Calculated amount
Control	1..1
Type	Money
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
46. Extension.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`http://hl7.org/fhir/5.0/StructureDefinition/extension-Account.balance`
48. Extension.value[x]
Definition	Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Value of extension
Control	0..0
Type	Choice of: base64Binary, boolean, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, Meta
Primitive Value	This primitive element may be present, or absent, or replaced by an extension