@prefix fhir: . @prefix owl: . @prefix rdf: . @prefix rdfs: . @prefix xsd: . # - resource ------------------------------------------------------------------- a fhir:ConceptMap ; fhir:nodeRole fhir:treeRoot ; fhir:id [ fhir:v "R5-SpecimenDefinition-element-map-to-R3"] ; # fhir:text [ fhir:status [ fhir:v "generated" ] ; fhir:div [ fhir:v "

Generated Narrative: ConceptMap R5-SpecimenDefinition-element-map-to-R3

Mapping from http://hl7.org/fhir/5.0 to http://hl7.org/fhir/3.0


Group 1 Mapping from http://hl7.org/fhir/StructureDefinition/SpecimenDefinition|5.0.0 to http://hl7.org/fhir/StructureDefinition/Basic|3.0.2

Source CodeRelationshipTarget CodeComment
SpecimenDefinition.meta (meta)is equivalent toBasic.metaElement matches Basic element path `Basic.meta` (`Resource.meta`), use that element instead.\nElement `SpecimenDefinition.meta` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.meta` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
SpecimenDefinition.implicitRules (implicitRules)is equivalent toBasic.implicitRulesElement matches Basic element path `Basic.implicitRules` (`Resource.implicitRules`), use that element instead.\nElement `SpecimenDefinition.implicitRules` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.implicitRules` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nAsserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.
SpecimenDefinition.language (language)is equivalent toBasic.languageElement matches Basic element path `Basic.language` (`Resource.language`), use that element instead.\nElement `SpecimenDefinition.language` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.language` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nLanguage is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).
SpecimenDefinition.text (text)is equivalent toBasic.textElement matches Basic element path `Basic.text` (`DomainResource.text`), use that element instead.\nElement `SpecimenDefinition.text` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.text` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nContained resources do not have a narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a \"text blob\" or where text is additionally entered raw or narrated and encoded information is added later.
SpecimenDefinition.contained (contained)is equivalent toBasic.containedElement matches Basic element path `Basic.contained` (`DomainResource.contained`), use that element instead.\nElement `SpecimenDefinition.contained` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.contained` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nThis should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.
SpecimenDefinition.identifier (identifier)is equivalent toBasic.identifierElement matches Basic element path `Basic.identifier` (`Basic.identifier`), use that element instead.\nElement `SpecimenDefinition.identifier` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.identifier` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Group 2 Mapping from http://hl7.org/fhir/StructureDefinition/SpecimenDefinition|5.0.0 to R5: Based on FHIR definition of another SpecimenDefinition (new)version: 0.1.0)

Source CodeRelationshipTarget CodeComment
SpecimenDefinition.derivedFromCanonical (derivedFromCanonical)maps to wider conceptExtension (R5: Based on FHIR definition of another SpecimenDefinition (new))Element `SpecimenDefinition.derivedFromCanonical` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.derivedFromCanonical` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Group 3 Mapping from http://hl7.org/fhir/StructureDefinition/SpecimenDefinition|5.0.0 to R5: Based on external definition (new)version: 0.1.0)

Source CodeRelationshipTarget CodeComment
SpecimenDefinition.derivedFromUri (derivedFromUri)maps to wider conceptExtension (R5: Based on external definition (new))Element `SpecimenDefinition.derivedFromUri` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.derivedFromUri` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Group 4 Mapping from http://hl7.org/fhir/StructureDefinition/SpecimenDefinition|5.0.0 to R5: Type of subject for specimen collection (new)version: 0.1.0)

Source CodeRelationshipTarget CodeComment
SpecimenDefinition.subject[x] (subject[x])maps to wider conceptExtension (R5: Type of subject for specimen collection (new))Element `SpecimenDefinition.subject[x]` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.subject[x]` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nExamples: person, animal, device, water ….

Group 5 Mapping from http://hl7.org/fhir/StructureDefinition/SpecimenDefinition|5.0.0 to R5: Intended jurisdiction for this SpecimenDefinition (if applicable) (new)version: 0.1.0)

Source CodeRelationshipTarget CodeComment
SpecimenDefinition.jurisdiction (jurisdiction)maps to wider conceptExtension (R5: Intended jurisdiction for this SpecimenDefinition (if applicable) (new))Element `SpecimenDefinition.jurisdiction` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.jurisdiction` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nElement `SpecimenDefinition.jurisdiction` has been flagged as deprecated.\nDEPRECATION NOTE: For consistency, implementations are encouraged to migrate to using the new 'jurisdiction' code in the useContext element. (I.e. useContext.code indicating http://terminology.hl7.org/CodeSystem/usage-context-type#jurisdiction and useContext.valueCodeableConcept indicating the jurisdiction.)

Group 6 Mapping from http://hl7.org/fhir/StructureDefinition/SpecimenDefinition|5.0.0 to R5: Kind of material to collect (new)version: 0.1.0)

Source CodeRelationshipTarget CodeComment
SpecimenDefinition.typeCollected (typeCollected)maps to wider conceptExtension (R5: Kind of material to collect (new))Element `SpecimenDefinition.typeCollected` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeCollected` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Group 7 Mapping from http://hl7.org/fhir/StructureDefinition/SpecimenDefinition|5.0.0 to R5: Patient preparation for collection (new)version: 0.1.0)

Source CodeRelationshipTarget CodeComment
SpecimenDefinition.patientPreparation (patientPreparation)maps to wider conceptExtension (R5: Patient preparation for collection (new))Element `SpecimenDefinition.patientPreparation` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.patientPreparation` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Group 8 Mapping from http://hl7.org/fhir/StructureDefinition/SpecimenDefinition|5.0.0 to R5: Time aspect for collection (new)version: 0.1.0)

Source CodeRelationshipTarget CodeComment
SpecimenDefinition.timeAspect (timeAspect)maps to wider conceptExtension (R5: Time aspect for collection (new))Element `SpecimenDefinition.timeAspect` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.timeAspect` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Group 9 Mapping from http://hl7.org/fhir/StructureDefinition/SpecimenDefinition|5.0.0 to R5: Specimen collection procedure (new)version: 0.1.0)

Source CodeRelationshipTarget CodeComment
SpecimenDefinition.collection (collection)maps to wider conceptExtension (R5: Specimen collection procedure (new))Element `SpecimenDefinition.collection` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.collection` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Group 10 Mapping from http://hl7.org/fhir/StructureDefinition/SpecimenDefinition|5.0.0 to R5: Specimen in container intended for testing by lab (new)version: 0.1.0)

Source CodeRelationshipTarget CodeComment
SpecimenDefinition.typeTested (typeTested)maps to wider conceptExtension (R5: Specimen in container intended for testing by lab (new))Element `SpecimenDefinition.typeTested` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
SpecimenDefinition.typeTested.isDerived (isDerived)maps to wider conceptExtension.extension:isDerived (R5: Primary or secondary specimen (new))Element `SpecimenDefinition.typeTested.isDerived` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.isDerived` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.isDerived` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
SpecimenDefinition.typeTested.type (type)maps to wider conceptExtension.extension:type (R5: Type of intended specimen (new))Element `SpecimenDefinition.typeTested.type` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.type` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.type` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
SpecimenDefinition.typeTested.preference (preference)maps to wider conceptExtension.extension:preference (R5: preferred | alternate (new))Element `SpecimenDefinition.typeTested.preference` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.preference` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.preference` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
SpecimenDefinition.typeTested.container (container)maps to wider conceptExtension.extension:container (R5: The specimen's container (new))Element `SpecimenDefinition.typeTested.container` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.container` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.container` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
SpecimenDefinition.typeTested.container.material (material)maps to wider conceptExtension.extension:container.extension:material (R5: The material type used for the container (new))Element `SpecimenDefinition.typeTested.container.material` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.container.material` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.container.material` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nExamples: glass, plastic, metal.
SpecimenDefinition.typeTested.container.type (type)maps to wider conceptExtension.extension:container.extension:type (R5: Kind of container associated with the kind of specimen (new))Element `SpecimenDefinition.typeTested.container.type` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.container.type` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.container.type` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
SpecimenDefinition.typeTested.container.cap (cap)maps to wider conceptExtension.extension:container.extension:cap (R5: Color of container cap (new))Element `SpecimenDefinition.typeTested.container.cap` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.container.cap` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.container.cap` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
SpecimenDefinition.typeTested.container.description (description)maps to wider conceptExtension.extension:container.extension:description (R5: The description of the kind of container (new))Element `SpecimenDefinition.typeTested.container.description` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.container.description` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.container.description` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
SpecimenDefinition.typeTested.container.capacity (capacity)maps to wider conceptExtension.extension:container.extension:capacity (R5: The capacity of this kind of container (new))Element `SpecimenDefinition.typeTested.container.capacity` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.container.capacity` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.container.capacity` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
SpecimenDefinition.typeTested.container.minimumVolume[x] (minimumVolume[x])maps to wider conceptExtension.extension:container.extension:minimumVolume (R5: Minimum volume (new))Element `SpecimenDefinition.typeTested.container.minimumVolume[x]` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.container.minimumVolume[x]` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.container.minimumVolume[x]` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
SpecimenDefinition.typeTested.container.additive (additive)maps to wider conceptExtension.extension:container.extension:additive (R5: Additive associated with container (new))Element `SpecimenDefinition.typeTested.container.additive` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.container.additive` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.container.additive` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
SpecimenDefinition.typeTested.container.additive.additive[x] (additive[x])maps to wider conceptExtension.extension:container.extension:additive.extension:additive (R5: Additive associated with container (new))Element `SpecimenDefinition.typeTested.container.additive.additive[x]` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container.additive` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.container.additive.additive[x]` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.container.additive.additive[x]` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
SpecimenDefinition.typeTested.container.preparation (preparation)maps to wider conceptExtension.extension:container.extension:preparation (R5: Special processing applied to the container for this specimen type (new))Element `SpecimenDefinition.typeTested.container.preparation` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.container.preparation` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.container.preparation` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
SpecimenDefinition.typeTested.requirement (requirement)maps to wider conceptExtension.extension:requirement (R5: Requirements for specimen delivery and special handling (new))Element `SpecimenDefinition.typeTested.requirement` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.requirement` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.requirement` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
SpecimenDefinition.typeTested.retentionTime (retentionTime)maps to wider conceptExtension.extension:retentionTime (R5: The usual time for retaining this kind of specimen (new))Element `SpecimenDefinition.typeTested.retentionTime` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.retentionTime` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.retentionTime` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
SpecimenDefinition.typeTested.singleUse (singleUse)maps to wider conceptExtension.extension:singleUse (R5: Specimen for single use only (new))Element `SpecimenDefinition.typeTested.singleUse` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.singleUse` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.singleUse` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
SpecimenDefinition.typeTested.rejectionCriterion (rejectionCriterion)maps to wider conceptExtension.extension:rejectionCriterion (R5: Criterion specified for specimen rejection (new))Element `SpecimenDefinition.typeTested.rejectionCriterion` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.rejectionCriterion` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.rejectionCriterion` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
SpecimenDefinition.typeTested.handling (handling)maps to wider conceptExtension.extension:handling (R5: Specimen handling before testing (new))Element `SpecimenDefinition.typeTested.handling` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.handling` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.handling` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
SpecimenDefinition.typeTested.handling.temperatureQualifier (temperatureQualifier)maps to wider conceptExtension.extension:handling.extension:temperatureQualifier (R5: Qualifies the interval of temperature (new))Element `SpecimenDefinition.typeTested.handling.temperatureQualifier` is part of an existing definition because parent element `SpecimenDefinition.typeTested.handling` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.handling.temperatureQualifier` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.handling.temperatureQualifier` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
SpecimenDefinition.typeTested.handling.temperatureRange (temperatureRange)maps to wider conceptExtension.extension:handling.extension:temperatureRange (R5: Temperature range for these handling instructions (new))Element `SpecimenDefinition.typeTested.handling.temperatureRange` is part of an existing definition because parent element `SpecimenDefinition.typeTested.handling` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.handling.temperatureRange` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.handling.temperatureRange` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
SpecimenDefinition.typeTested.handling.maxDuration (maxDuration)maps to wider conceptExtension.extension:handling.extension:maxDuration (R5: Maximum preservation time (new))Element `SpecimenDefinition.typeTested.handling.maxDuration` is part of an existing definition because parent element `SpecimenDefinition.typeTested.handling` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.handling.maxDuration` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.handling.maxDuration` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
SpecimenDefinition.typeTested.handling.instruction (instruction)maps to wider conceptExtension.extension:handling.extension:instruction (R5: Preservation instruction (new))Element `SpecimenDefinition.typeTested.handling.instruction` is part of an existing definition because parent element `SpecimenDefinition.typeTested.handling` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.handling.instruction` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.handling.instruction` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
SpecimenDefinition.typeTested.testingDestination (testingDestination)maps to wider conceptExtension.extension:testingDestination (R5: Where the specimen will be tested (new))Element `SpecimenDefinition.typeTested.testingDestination` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.testingDestination` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.testingDestination` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
"^^rdf:XMLLiteral ] ] ; # fhir:extension ( [ fhir:url [ fhir:v "http://hl7.org/fhir/StructureDefinition/structuredefinition-wg"^^xsd:anyURI ; fhir:l ] ; fhir:value [ a fhir:Code ; fhir:v "fhir" ] ] [ fhir:url [ fhir:v "http://hl7.org/fhir/StructureDefinition/structuredefinition-fmm"^^xsd:anyURI ; fhir:l ] ; fhir:value [ a fhir:Integer ; fhir:v 0 ; fhir:extension ( [ fhir:url [ fhir:v "http://hl7.org/fhir/StructureDefinition/structuredefinition-conformance-derivedFrom"^^xsd:anyURI ; fhir:l ] ; fhir:value [ a fhir:Uri ; fhir:v "http://hl7.org/fhir/uv/xver/ImplementationGuide/hl7.fhir.uv.xver-r5.r3"^^xsd:anyURI ; fhir:l ] ] ) ] ] [ fhir:url [ fhir:v "http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status"^^xsd:anyURI ; fhir:l ] ; fhir:value [ a fhir:Code ; fhir:v "trial-use" ; fhir:extension ( [ fhir:url [ fhir:v "http://hl7.org/fhir/StructureDefinition/structuredefinition-conformance-derivedFrom"^^xsd:anyURI ; fhir:l ] ; fhir:value [ a fhir:Uri ; fhir:v "http://hl7.org/fhir/uv/xver/ImplementationGuide/hl7.fhir.uv.xver-r5.r3"^^xsd:anyURI ; fhir:l ] ] ) ] ] ) ; # fhir:url [ fhir:v "http://hl7.org/fhir/uv/xver/ConceptMap/R5-SpecimenDefinition-element-map-to-R3"^^xsd:anyURI ; fhir:l ] ; # fhir:version [ fhir:v "0.1.0"] ; # fhir:name [ fhir:v "R5SpecimenDefinitionElementMapToR3"] ; # fhir:title [ fhir:v "Cross-version mapping for FHIR R5 SpecimenDefinition to FHIR STU3 Basic"] ; # fhir:status [ fhir:v "active"] ; # fhir:experimental [ fhir:v false] ; # fhir:date [ fhir:v "2026-03-17T16:05:20.6748285-05:00"^^xsd:dateTime] ; # fhir:contact ( [ fhir:name [ fhir:v "FHIR Infrastructure" ] ; fhir:telecom ( [ fhir:system [ fhir:v "url" ] ; fhir:value [ fhir:v "http://www.hl7.org/Special/committees/fiwg" ] ] ) ] ) ; # fhir:description [ fhir:v "This ConceptMap represents cross-version mappings for elements from a FHIR R5 SpecimenDefinition to FHIR STU3."] ; # fhir:jurisdiction ( [ fhir:coding ( [ fhir:system [ fhir:v "http://unstats.un.org/unsd/methods/m49/m49.htm"^^xsd:anyURI ; fhir:l ] ; fhir:code [ fhir:v "001" ] ; fhir:display [ fhir:v "World" ] ] ) ] ) ; # fhir:source [ a fhir:Uri ; fhir:v "http://hl7.org/fhir/5.0"^^xsd:anyURI ; fhir:l ] ; # fhir:target [ a fhir:Uri ; fhir:v "http://hl7.org/fhir/3.0"^^xsd:anyURI ; fhir:l ] ; # fhir:group ( [ fhir:source [ fhir:v "http://hl7.org/fhir/StructureDefinition/SpecimenDefinition"^^xsd:anyURI ; fhir:l ] ; fhir:sourceVersion [ fhir:v "5.0.0" ] ; fhir:target [ fhir:v "http://hl7.org/fhir/StructureDefinition/Basic"^^xsd:anyURI ; fhir:l ] ; fhir:targetVersion [ fhir:v "3.0.2" ] ; fhir:element ( [ fhir:code [ fhir:v "SpecimenDefinition.meta" ] ; fhir:display [ fhir:v "meta" ] ; fhir:_target ( [ fhir:modifierExtension ( [ fhir:url [ fhir:v "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence"^^xsd:anyURI ; fhir:l ] ; fhir:value [ a fhir:Code ; fhir:v "equivalent" ] ] ) ; fhir:code [ fhir:v "Basic.meta" ] ; fhir:display [ fhir:v "Basic.meta" ] ; fhir:equivalence [ fhir:v "equivalent" ] ; fhir:comment [ fhir:v "Element matches Basic element path `Basic.meta` (`Resource.meta`), use that element instead.\nElement `SpecimenDefinition.meta` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.meta` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)." ] ] ) ] [ fhir:code [ fhir:v "SpecimenDefinition.implicitRules" ] ; fhir:display [ fhir:v "implicitRules" ] ; fhir:_target ( [ fhir:modifierExtension ( [ fhir:url [ fhir:v "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence"^^xsd:anyURI ; fhir:l ] ; fhir:value [ a fhir:Code ; fhir:v "equivalent" ] ] ) ; fhir:code [ fhir:v "Basic.implicitRules" ] ; fhir:display [ fhir:v "Basic.implicitRules" ] ; fhir:equivalence [ fhir:v "equivalent" ] ; fhir:comment [ fhir:v "Element matches Basic element path `Basic.implicitRules` (`Resource.implicitRules`), use that element instead.\nElement `SpecimenDefinition.implicitRules` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.implicitRules` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nAsserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc." ] ] ) ] [ fhir:code [ fhir:v "SpecimenDefinition.language" ] ; fhir:display [ fhir:v "language" ] ; fhir:_target ( [ fhir:modifierExtension ( [ fhir:url [ fhir:v "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence"^^xsd:anyURI ; fhir:l ] ; fhir:value [ a fhir:Code ; fhir:v "equivalent" ] ] ) ; fhir:code [ fhir:v "Basic.language" ] ; fhir:display [ fhir:v "Basic.language" ] ; fhir:equivalence [ fhir:v "equivalent" ] ; fhir:comment [ fhir:v "Element matches Basic element path `Basic.language` (`Resource.language`), use that element instead.\nElement `SpecimenDefinition.language` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.language` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nLanguage is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute)." ] ] ) ] [ fhir:code [ fhir:v "SpecimenDefinition.text" ] ; fhir:display [ fhir:v "text" ] ; fhir:_target ( [ fhir:modifierExtension ( [ fhir:url [ fhir:v "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence"^^xsd:anyURI ; fhir:l ] ; fhir:value [ a fhir:Code ; fhir:v "equivalent" ] ] ) ; fhir:code [ fhir:v "Basic.text" ] ; fhir:display [ fhir:v "Basic.text" ] ; fhir:equivalence [ fhir:v "equivalent" ] ; fhir:comment [ fhir:v "Element matches Basic element path `Basic.text` (`DomainResource.text`), use that element instead.\nElement `SpecimenDefinition.text` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.text` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nContained resources do not have a narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a \"text blob\" or where text is additionally entered raw or narrated and encoded information is added later." ] ] ) ] [ fhir:code [ fhir:v "SpecimenDefinition.contained" ] ; fhir:display [ fhir:v "contained" ] ; fhir:_target ( [ fhir:modifierExtension ( [ fhir:url [ fhir:v "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence"^^xsd:anyURI ; fhir:l ] ; fhir:value [ a fhir:Code ; fhir:v "equivalent" ] ] ) ; fhir:code [ fhir:v "Basic.contained" ] ; fhir:display [ fhir:v "Basic.contained" ] ; fhir:equivalence [ fhir:v "equivalent" ] ; fhir:comment [ fhir:v "Element matches Basic element path `Basic.contained` (`DomainResource.contained`), use that element instead.\nElement `SpecimenDefinition.contained` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.contained` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nThis should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels." ] ] ) ] [ fhir:code [ fhir:v "SpecimenDefinition.identifier" ] ; fhir:display [ fhir:v "identifier" ] ; fhir:_target ( [ fhir:modifierExtension ( [ fhir:url [ fhir:v "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence"^^xsd:anyURI ; fhir:l ] ; fhir:value [ a fhir:Code ; fhir:v "equivalent" ] ] ) ; fhir:code [ fhir:v "Basic.identifier" ] ; fhir:display [ fhir:v "Basic.identifier" ] ; fhir:equivalence [ fhir:v "equivalent" ] ; fhir:comment [ fhir:v "Element matches Basic element path `Basic.identifier` (`Basic.identifier`), use that element instead.\nElement `SpecimenDefinition.identifier` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.identifier` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)." ] ] ) ] ) ] [ fhir:source [ fhir:v "http://hl7.org/fhir/StructureDefinition/SpecimenDefinition"^^xsd:anyURI ; fhir:l ] ; fhir:sourceVersion [ fhir:v "5.0.0" ] ; fhir:target [ fhir:v "http://hl7.org/fhir/5.0/StructureDefinition/extension-SpecimenDefinition.derivedFromCanonical"^^xsd:anyURI ; fhir:l ] ; fhir:targetVersion [ fhir:v "0.1.0" ] ; fhir:element ( [ fhir:code [ fhir:v "SpecimenDefinition.derivedFromCanonical" ] ; fhir:display [ fhir:v "derivedFromCanonical" ] ; fhir:_target ( [ fhir:modifierExtension ( [ fhir:url [ fhir:v "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence"^^xsd:anyURI ; fhir:l ] ; fhir:value [ a fhir:Code ; fhir:v "wider" ] ] ) ; fhir:code [ fhir:v "Extension" ] ; fhir:equivalence [ fhir:v "wider" ] ; fhir:comment [ fhir:v "Element `SpecimenDefinition.derivedFromCanonical` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.derivedFromCanonical` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)." ] ] ) ] ) ] [ fhir:source [ fhir:v "http://hl7.org/fhir/StructureDefinition/SpecimenDefinition"^^xsd:anyURI ; fhir:l ] ; fhir:sourceVersion [ fhir:v "5.0.0" ] ; fhir:target [ fhir:v "http://hl7.org/fhir/5.0/StructureDefinition/extension-SpecimenDefinition.derivedFromUri"^^xsd:anyURI ; fhir:l ] ; fhir:targetVersion [ fhir:v "0.1.0" ] ; fhir:element ( [ fhir:code [ fhir:v "SpecimenDefinition.derivedFromUri" ] ; fhir:display [ fhir:v "derivedFromUri" ] ; fhir:_target ( [ fhir:modifierExtension ( [ fhir:url [ fhir:v "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence"^^xsd:anyURI ; fhir:l ] ; fhir:value [ a fhir:Code ; fhir:v "wider" ] ] ) ; fhir:code [ fhir:v "Extension" ] ; fhir:equivalence [ fhir:v "wider" ] ; fhir:comment [ fhir:v "Element `SpecimenDefinition.derivedFromUri` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.derivedFromUri` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)." ] ] ) ] ) ] [ fhir:source [ fhir:v "http://hl7.org/fhir/StructureDefinition/SpecimenDefinition"^^xsd:anyURI ; fhir:l ] ; fhir:sourceVersion [ fhir:v "5.0.0" ] ; fhir:target [ fhir:v "http://hl7.org/fhir/5.0/StructureDefinition/extension-SpecimenDefinition.subject"^^xsd:anyURI ; fhir:l ] ; fhir:targetVersion [ fhir:v "0.1.0" ] ; fhir:element ( [ fhir:code [ fhir:v "SpecimenDefinition.subject[x]" ] ; fhir:display [ fhir:v "subject[x]" ] ; fhir:_target ( [ fhir:modifierExtension ( [ fhir:url [ fhir:v "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence"^^xsd:anyURI ; fhir:l ] ; fhir:value [ a fhir:Code ; fhir:v "wider" ] ] ) ; fhir:code [ fhir:v "Extension" ] ; fhir:equivalence [ fhir:v "wider" ] ; fhir:comment [ fhir:v "Element `SpecimenDefinition.subject[x]` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.subject[x]` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nExamples: person, animal, device, water …." ] ] ) ] ) ] [ fhir:source [ fhir:v "http://hl7.org/fhir/StructureDefinition/SpecimenDefinition"^^xsd:anyURI ; fhir:l ] ; fhir:sourceVersion [ fhir:v "5.0.0" ] ; fhir:target [ fhir:v "http://hl7.org/fhir/5.0/StructureDefinition/extension-SpecimenDefinition.jurisdiction"^^xsd:anyURI ; fhir:l ] ; fhir:targetVersion [ fhir:v "0.1.0" ] ; fhir:element ( [ fhir:code [ fhir:v "SpecimenDefinition.jurisdiction" ] ; fhir:display [ fhir:v "jurisdiction" ] ; fhir:_target ( [ fhir:modifierExtension ( [ fhir:url [ fhir:v "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence"^^xsd:anyURI ; fhir:l ] ; fhir:value [ a fhir:Code ; fhir:v "wider" ] ] ) ; fhir:code [ fhir:v "Extension" ] ; fhir:equivalence [ fhir:v "wider" ] ; fhir:comment [ fhir:v "Element `SpecimenDefinition.jurisdiction` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.jurisdiction` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nElement `SpecimenDefinition.jurisdiction` has been flagged as deprecated.\nDEPRECATION NOTE: For consistency, implementations are encouraged to migrate to using the new 'jurisdiction' code in the useContext element. (I.e. useContext.code indicating http://terminology.hl7.org/CodeSystem/usage-context-type#jurisdiction and useContext.valueCodeableConcept indicating the jurisdiction.)" ] ] ) ] ) ] [ fhir:source [ fhir:v "http://hl7.org/fhir/StructureDefinition/SpecimenDefinition"^^xsd:anyURI ; fhir:l ] ; fhir:sourceVersion [ fhir:v "5.0.0" ] ; fhir:target [ fhir:v "http://hl7.org/fhir/5.0/StructureDefinition/extension-SpecimenDefinition.typeCollected"^^xsd:anyURI ; fhir:l ] ; fhir:targetVersion [ fhir:v "0.1.0" ] ; fhir:element ( [ fhir:code [ fhir:v "SpecimenDefinition.typeCollected" ] ; fhir:display [ fhir:v "typeCollected" ] ; fhir:_target ( [ fhir:modifierExtension ( [ fhir:url [ fhir:v "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence"^^xsd:anyURI ; fhir:l ] ; fhir:value [ a fhir:Code ; fhir:v "wider" ] ] ) ; fhir:code [ fhir:v "Extension" ] ; fhir:equivalence [ fhir:v "wider" ] ; fhir:comment [ fhir:v "Element `SpecimenDefinition.typeCollected` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeCollected` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)." ] ] ) ] ) ] [ fhir:source [ fhir:v "http://hl7.org/fhir/StructureDefinition/SpecimenDefinition"^^xsd:anyURI ; fhir:l ] ; fhir:sourceVersion [ fhir:v "5.0.0" ] ; fhir:target [ fhir:v "http://hl7.org/fhir/5.0/StructureDefinition/extension-SpecimenDefinition.patientPreparation"^^xsd:anyURI ; fhir:l ] ; fhir:targetVersion [ fhir:v "0.1.0" ] ; fhir:element ( [ fhir:code [ fhir:v "SpecimenDefinition.patientPreparation" ] ; fhir:display [ fhir:v "patientPreparation" ] ; fhir:_target ( [ fhir:modifierExtension ( [ fhir:url [ fhir:v "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence"^^xsd:anyURI ; fhir:l ] ; fhir:value [ a fhir:Code ; fhir:v "wider" ] ] ) ; fhir:code [ fhir:v "Extension" ] ; fhir:equivalence [ fhir:v "wider" ] ; fhir:comment [ fhir:v "Element `SpecimenDefinition.patientPreparation` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.patientPreparation` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)." ] ] ) ] ) ] [ fhir:source [ fhir:v "http://hl7.org/fhir/StructureDefinition/SpecimenDefinition"^^xsd:anyURI ; fhir:l ] ; fhir:sourceVersion [ fhir:v "5.0.0" ] ; fhir:target [ fhir:v "http://hl7.org/fhir/5.0/StructureDefinition/extension-SpecimenDefinition.timeAspect"^^xsd:anyURI ; fhir:l ] ; fhir:targetVersion [ fhir:v "0.1.0" ] ; fhir:element ( [ fhir:code [ fhir:v "SpecimenDefinition.timeAspect" ] ; fhir:display [ fhir:v "timeAspect" ] ; fhir:_target ( [ fhir:modifierExtension ( [ fhir:url [ fhir:v "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence"^^xsd:anyURI ; fhir:l ] ; fhir:value [ a fhir:Code ; fhir:v "wider" ] ] ) ; fhir:code [ fhir:v "Extension" ] ; fhir:equivalence [ fhir:v "wider" ] ; fhir:comment [ fhir:v "Element `SpecimenDefinition.timeAspect` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.timeAspect` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)." ] ] ) ] ) ] [ fhir:source [ fhir:v "http://hl7.org/fhir/StructureDefinition/SpecimenDefinition"^^xsd:anyURI ; fhir:l ] ; fhir:sourceVersion [ fhir:v "5.0.0" ] ; fhir:target [ fhir:v "http://hl7.org/fhir/5.0/StructureDefinition/extension-SpecimenDefinition.collection"^^xsd:anyURI ; fhir:l ] ; fhir:targetVersion [ fhir:v "0.1.0" ] ; fhir:element ( [ fhir:code [ fhir:v "SpecimenDefinition.collection" ] ; fhir:display [ fhir:v "collection" ] ; fhir:_target ( [ fhir:modifierExtension ( [ fhir:url [ fhir:v "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence"^^xsd:anyURI ; fhir:l ] ; fhir:value [ a fhir:Code ; fhir:v "wider" ] ] ) ; fhir:code [ fhir:v "Extension" ] ; fhir:equivalence [ fhir:v "wider" ] ; fhir:comment [ fhir:v "Element `SpecimenDefinition.collection` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.collection` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)." ] ] ) ] ) ] [ fhir:source [ fhir:v "http://hl7.org/fhir/StructureDefinition/SpecimenDefinition"^^xsd:anyURI ; fhir:l ] ; fhir:sourceVersion [ fhir:v "5.0.0" ] ; fhir:target [ fhir:v "http://hl7.org/fhir/5.0/StructureDefinition/extension-SpecimenDefinition.typeTested"^^xsd:anyURI ; fhir:l ] ; fhir:targetVersion [ fhir:v "0.1.0" ] ; fhir:element ( [ fhir:code [ fhir:v "SpecimenDefinition.typeTested" ] ; fhir:display [ fhir:v "typeTested" ] ; fhir:_target ( [ fhir:modifierExtension ( [ fhir:url [ fhir:v "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence"^^xsd:anyURI ; fhir:l ] ; fhir:value [ a fhir:Code ; fhir:v "wider" ] ] ) ; fhir:code [ fhir:v "Extension" ] ; fhir:equivalence [ fhir:v "wider" ] ; fhir:comment [ fhir:v "Element `SpecimenDefinition.typeTested` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)." ] ] ) ] [ fhir:code [ fhir:v "SpecimenDefinition.typeTested.isDerived" ] ; fhir:display [ fhir:v "isDerived" ] ; fhir:_target ( [ fhir:modifierExtension ( [ fhir:url [ fhir:v "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence"^^xsd:anyURI ; fhir:l ] ; fhir:value [ a fhir:Code ; fhir:v "wider" ] ] ) ; fhir:code [ fhir:v "Extension.extension:isDerived" ] ; fhir:equivalence [ fhir:v "wider" ] ; fhir:comment [ fhir:v "Element `SpecimenDefinition.typeTested.isDerived` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.isDerived` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.isDerived` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)." ] ] ) ] [ fhir:code [ fhir:v "SpecimenDefinition.typeTested.type" ] ; fhir:display [ fhir:v "type" ] ; fhir:_target ( [ fhir:modifierExtension ( [ fhir:url [ fhir:v "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence"^^xsd:anyURI ; fhir:l ] ; fhir:value [ a fhir:Code ; fhir:v "wider" ] ] ) ; fhir:code [ fhir:v "Extension.extension:type" ] ; fhir:equivalence [ fhir:v "wider" ] ; fhir:comment [ fhir:v "Element `SpecimenDefinition.typeTested.type` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.type` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.type` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)." ] ] ) ] [ fhir:code [ fhir:v "SpecimenDefinition.typeTested.preference" ] ; fhir:display [ fhir:v "preference" ] ; fhir:_target ( [ fhir:modifierExtension ( [ fhir:url [ fhir:v "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence"^^xsd:anyURI ; fhir:l ] ; fhir:value [ a fhir:Code ; fhir:v "wider" ] ] ) ; fhir:code [ fhir:v "Extension.extension:preference" ] ; fhir:equivalence [ fhir:v "wider" ] ; fhir:comment [ fhir:v "Element `SpecimenDefinition.typeTested.preference` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.preference` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.preference` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)." ] ] ) ] [ fhir:code [ fhir:v "SpecimenDefinition.typeTested.container" ] ; fhir:display [ fhir:v "container" ] ; fhir:_target ( [ fhir:modifierExtension ( [ fhir:url [ fhir:v "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence"^^xsd:anyURI ; fhir:l ] ; fhir:value [ a fhir:Code ; fhir:v "wider" ] ] ) ; fhir:code [ fhir:v "Extension.extension:container" ] ; fhir:equivalence [ fhir:v "wider" ] ; fhir:comment [ fhir:v "Element `SpecimenDefinition.typeTested.container` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.container` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.container` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)." ] ] ) ] [ fhir:code [ fhir:v "SpecimenDefinition.typeTested.container.material" ] ; fhir:display [ fhir:v "material" ] ; fhir:_target ( [ fhir:modifierExtension ( [ fhir:url [ fhir:v "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence"^^xsd:anyURI ; fhir:l ] ; fhir:value [ a fhir:Code ; fhir:v "wider" ] ] ) ; fhir:code [ fhir:v "Extension.extension:container.extension:material" ] ; fhir:equivalence [ fhir:v "wider" ] ; fhir:comment [ fhir:v "Element `SpecimenDefinition.typeTested.container.material` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.container.material` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.container.material` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nExamples: glass, plastic, metal." ] ] ) ] [ fhir:code [ fhir:v "SpecimenDefinition.typeTested.container.type" ] ; fhir:display [ fhir:v "type" ] ; fhir:_target ( [ fhir:modifierExtension ( [ fhir:url [ fhir:v "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence"^^xsd:anyURI ; fhir:l ] ; fhir:value [ a fhir:Code ; fhir:v "wider" ] ] ) ; fhir:code [ fhir:v "Extension.extension:container.extension:type" ] ; fhir:equivalence [ fhir:v "wider" ] ; fhir:comment [ fhir:v "Element `SpecimenDefinition.typeTested.container.type` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.container.type` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.container.type` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)." ] ] ) ] [ fhir:code [ fhir:v "SpecimenDefinition.typeTested.container.cap" ] ; fhir:display [ fhir:v "cap" ] ; fhir:_target ( [ fhir:modifierExtension ( [ fhir:url [ fhir:v "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence"^^xsd:anyURI ; fhir:l ] ; fhir:value [ a fhir:Code ; fhir:v "wider" ] ] ) ; fhir:code [ fhir:v "Extension.extension:container.extension:cap" ] ; fhir:equivalence [ fhir:v "wider" ] ; fhir:comment [ fhir:v "Element `SpecimenDefinition.typeTested.container.cap` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.container.cap` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.container.cap` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)." ] ] ) ] [ fhir:code [ fhir:v "SpecimenDefinition.typeTested.container.description" ] ; fhir:display [ fhir:v "description" ] ; fhir:_target ( [ fhir:modifierExtension ( [ fhir:url [ fhir:v "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence"^^xsd:anyURI ; fhir:l ] ; fhir:value [ a fhir:Code ; fhir:v "wider" ] ] ) ; fhir:code [ fhir:v "Extension.extension:container.extension:description" ] ; fhir:equivalence [ fhir:v "wider" ] ; fhir:comment [ fhir:v "Element `SpecimenDefinition.typeTested.container.description` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.container.description` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.container.description` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)." ] ] ) ] [ fhir:code [ fhir:v "SpecimenDefinition.typeTested.container.capacity" ] ; fhir:display [ fhir:v "capacity" ] ; fhir:_target ( [ fhir:modifierExtension ( [ fhir:url [ fhir:v "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence"^^xsd:anyURI ; fhir:l ] ; fhir:value [ a fhir:Code ; fhir:v "wider" ] ] ) ; fhir:code [ fhir:v "Extension.extension:container.extension:capacity" ] ; fhir:equivalence [ fhir:v "wider" ] ; fhir:comment [ fhir:v "Element `SpecimenDefinition.typeTested.container.capacity` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.container.capacity` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.container.capacity` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)." ] ] ) ] [ fhir:code [ fhir:v "SpecimenDefinition.typeTested.container.minimumVolume[x]" ] ; fhir:display [ fhir:v "minimumVolume[x]" ] ; fhir:_target ( [ fhir:modifierExtension ( [ fhir:url [ fhir:v "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence"^^xsd:anyURI ; fhir:l ] ; fhir:value [ a fhir:Code ; fhir:v "wider" ] ] ) ; fhir:code [ fhir:v "Extension.extension:container.extension:minimumVolume" ] ; fhir:equivalence [ fhir:v "wider" ] ; fhir:comment [ fhir:v "Element `SpecimenDefinition.typeTested.container.minimumVolume[x]` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.container.minimumVolume[x]` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.container.minimumVolume[x]` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)." ] ] ) ] [ fhir:code [ fhir:v "SpecimenDefinition.typeTested.container.additive" ] ; fhir:display [ fhir:v "additive" ] ; fhir:_target ( [ fhir:modifierExtension ( [ fhir:url [ fhir:v "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence"^^xsd:anyURI ; fhir:l ] ; fhir:value [ a fhir:Code ; fhir:v "wider" ] ] ) ; fhir:code [ fhir:v "Extension.extension:container.extension:additive" ] ; fhir:equivalence [ fhir:v "wider" ] ; fhir:comment [ fhir:v "Element `SpecimenDefinition.typeTested.container.additive` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.container.additive` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.container.additive` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)." ] ] ) ] [ fhir:code [ fhir:v "SpecimenDefinition.typeTested.container.additive.additive[x]" ] ; fhir:display [ fhir:v "additive[x]" ] ; fhir:_target ( [ fhir:modifierExtension ( [ fhir:url [ fhir:v "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence"^^xsd:anyURI ; fhir:l ] ; fhir:value [ a fhir:Code ; fhir:v "wider" ] ] ) ; fhir:code [ fhir:v "Extension.extension:container.extension:additive.extension:additive" ] ; fhir:equivalence [ fhir:v "wider" ] ; fhir:comment [ fhir:v "Element `SpecimenDefinition.typeTested.container.additive.additive[x]` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container.additive` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.container.additive.additive[x]` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.container.additive.additive[x]` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)." ] ] ) ] [ fhir:code [ fhir:v "SpecimenDefinition.typeTested.container.preparation" ] ; fhir:display [ fhir:v "preparation" ] ; fhir:_target ( [ fhir:modifierExtension ( [ fhir:url [ fhir:v "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence"^^xsd:anyURI ; fhir:l ] ; fhir:value [ a fhir:Code ; fhir:v "wider" ] ] ) ; fhir:code [ fhir:v "Extension.extension:container.extension:preparation" ] ; fhir:equivalence [ fhir:v "wider" ] ; fhir:comment [ fhir:v "Element `SpecimenDefinition.typeTested.container.preparation` is part of an existing definition because parent element `SpecimenDefinition.typeTested.container` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.container.preparation` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.container.preparation` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)." ] ] ) ] [ fhir:code [ fhir:v "SpecimenDefinition.typeTested.requirement" ] ; fhir:display [ fhir:v "requirement" ] ; fhir:_target ( [ fhir:modifierExtension ( [ fhir:url [ fhir:v "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence"^^xsd:anyURI ; fhir:l ] ; fhir:value [ a fhir:Code ; fhir:v "wider" ] ] ) ; fhir:code [ fhir:v "Extension.extension:requirement" ] ; fhir:equivalence [ fhir:v "wider" ] ; fhir:comment [ fhir:v "Element `SpecimenDefinition.typeTested.requirement` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.requirement` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.requirement` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)." ] ] ) ] [ fhir:code [ fhir:v "SpecimenDefinition.typeTested.retentionTime" ] ; fhir:display [ fhir:v "retentionTime" ] ; fhir:_target ( [ fhir:modifierExtension ( [ fhir:url [ fhir:v "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence"^^xsd:anyURI ; fhir:l ] ; fhir:value [ a fhir:Code ; fhir:v "wider" ] ] ) ; fhir:code [ fhir:v "Extension.extension:retentionTime" ] ; fhir:equivalence [ fhir:v "wider" ] ; fhir:comment [ fhir:v "Element `SpecimenDefinition.typeTested.retentionTime` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.retentionTime` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.retentionTime` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)." ] ] ) ] [ fhir:code [ fhir:v "SpecimenDefinition.typeTested.singleUse" ] ; fhir:display [ fhir:v "singleUse" ] ; fhir:_target ( [ fhir:modifierExtension ( [ fhir:url [ fhir:v "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence"^^xsd:anyURI ; fhir:l ] ; fhir:value [ a fhir:Code ; fhir:v "wider" ] ] ) ; fhir:code [ fhir:v "Extension.extension:singleUse" ] ; fhir:equivalence [ fhir:v "wider" ] ; fhir:comment [ fhir:v "Element `SpecimenDefinition.typeTested.singleUse` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.singleUse` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.singleUse` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)." ] ] ) ] [ fhir:code [ fhir:v "SpecimenDefinition.typeTested.rejectionCriterion" ] ; fhir:display [ fhir:v "rejectionCriterion" ] ; fhir:_target ( [ fhir:modifierExtension ( [ fhir:url [ fhir:v "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence"^^xsd:anyURI ; fhir:l ] ; fhir:value [ a fhir:Code ; fhir:v "wider" ] ] ) ; fhir:code [ fhir:v "Extension.extension:rejectionCriterion" ] ; fhir:equivalence [ fhir:v "wider" ] ; fhir:comment [ fhir:v "Element `SpecimenDefinition.typeTested.rejectionCriterion` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.rejectionCriterion` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.rejectionCriterion` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)." ] ] ) ] [ fhir:code [ fhir:v "SpecimenDefinition.typeTested.handling" ] ; fhir:display [ fhir:v "handling" ] ; fhir:_target ( [ fhir:modifierExtension ( [ fhir:url [ fhir:v "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence"^^xsd:anyURI ; fhir:l ] ; fhir:value [ a fhir:Code ; fhir:v "wider" ] ] ) ; fhir:code [ fhir:v "Extension.extension:handling" ] ; fhir:equivalence [ fhir:v "wider" ] ; fhir:comment [ fhir:v "Element `SpecimenDefinition.typeTested.handling` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.handling` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.handling` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)." ] ] ) ] [ fhir:code [ fhir:v "SpecimenDefinition.typeTested.handling.temperatureQualifier" ] ; fhir:display [ fhir:v "temperatureQualifier" ] ; fhir:_target ( [ fhir:modifierExtension ( [ fhir:url [ fhir:v "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence"^^xsd:anyURI ; fhir:l ] ; fhir:value [ a fhir:Code ; fhir:v "wider" ] ] ) ; fhir:code [ fhir:v "Extension.extension:handling.extension:temperatureQualifier" ] ; fhir:equivalence [ fhir:v "wider" ] ; fhir:comment [ fhir:v "Element `SpecimenDefinition.typeTested.handling.temperatureQualifier` is part of an existing definition because parent element `SpecimenDefinition.typeTested.handling` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.handling.temperatureQualifier` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.handling.temperatureQualifier` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)." ] ] ) ] [ fhir:code [ fhir:v "SpecimenDefinition.typeTested.handling.temperatureRange" ] ; fhir:display [ fhir:v "temperatureRange" ] ; fhir:_target ( [ fhir:modifierExtension ( [ fhir:url [ fhir:v "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence"^^xsd:anyURI ; fhir:l ] ; fhir:value [ a fhir:Code ; fhir:v "wider" ] ] ) ; fhir:code [ fhir:v "Extension.extension:handling.extension:temperatureRange" ] ; fhir:equivalence [ fhir:v "wider" ] ; fhir:comment [ fhir:v "Element `SpecimenDefinition.typeTested.handling.temperatureRange` is part of an existing definition because parent element `SpecimenDefinition.typeTested.handling` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.handling.temperatureRange` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.handling.temperatureRange` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)." ] ] ) ] [ fhir:code [ fhir:v "SpecimenDefinition.typeTested.handling.maxDuration" ] ; fhir:display [ fhir:v "maxDuration" ] ; fhir:_target ( [ fhir:modifierExtension ( [ fhir:url [ fhir:v "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence"^^xsd:anyURI ; fhir:l ] ; fhir:value [ a fhir:Code ; fhir:v "wider" ] ] ) ; fhir:code [ fhir:v "Extension.extension:handling.extension:maxDuration" ] ; fhir:equivalence [ fhir:v "wider" ] ; fhir:comment [ fhir:v "Element `SpecimenDefinition.typeTested.handling.maxDuration` is part of an existing definition because parent element `SpecimenDefinition.typeTested.handling` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.handling.maxDuration` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.handling.maxDuration` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)." ] ] ) ] [ fhir:code [ fhir:v "SpecimenDefinition.typeTested.handling.instruction" ] ; fhir:display [ fhir:v "instruction" ] ; fhir:_target ( [ fhir:modifierExtension ( [ fhir:url [ fhir:v "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence"^^xsd:anyURI ; fhir:l ] ; fhir:value [ a fhir:Code ; fhir:v "wider" ] ] ) ; fhir:code [ fhir:v "Extension.extension:handling.extension:instruction" ] ; fhir:equivalence [ fhir:v "wider" ] ; fhir:comment [ fhir:v "Element `SpecimenDefinition.typeTested.handling.instruction` is part of an existing definition because parent element `SpecimenDefinition.typeTested.handling` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.handling.instruction` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.handling.instruction` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)." ] ] ) ] [ fhir:code [ fhir:v "SpecimenDefinition.typeTested.testingDestination" ] ; fhir:display [ fhir:v "testingDestination" ] ; fhir:_target ( [ fhir:modifierExtension ( [ fhir:url [ fhir:v "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence"^^xsd:anyURI ; fhir:l ] ; fhir:value [ a fhir:Code ; fhir:v "wider" ] ] ) ; fhir:code [ fhir:v "Extension.extension:testingDestination" ] ; fhir:equivalence [ fhir:v "wider" ] ; fhir:comment [ fhir:v "Element `SpecimenDefinition.typeTested.testingDestination` is part of an existing definition because parent element `SpecimenDefinition.typeTested` requires a cross-version extension.\nElement `SpecimenDefinition.typeTested.testingDestination` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped.\nElement `SpecimenDefinition.typeTested.testingDestination` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)." ] ] ) ] ) ] ) . # # -------------------------------------------------------------------------------------