{ "resourceType" : "ConceptMap", "id" : "R5-Requirements-element-map-to-R3", "text" : { "status" : "generated", "div" : "

Generated Narrative: ConceptMap R5-Requirements-element-map-to-R3

Mapping from http://hl7.org/fhir/5.0 to http://hl7.org/fhir/3.0


Group 1 Mapping from Requirementsversion: 5.0.0) to http://hl7.org/fhir/StructureDefinition/Basic|3.0.2

Source CodeRelationshipTarget CodeComment
Requirements.meta (meta)is equivalent toBasic.metaElement matches Basic element path `Basic.meta` (`Resource.meta`), use that element instead.\nElement `Requirements.meta` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.meta` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Requirements.implicitRules (implicitRules)is equivalent toBasic.implicitRulesElement matches Basic element path `Basic.implicitRules` (`Resource.implicitRules`), use that element instead.\nElement `Requirements.implicitRules` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.implicitRules` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nAsserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.
Requirements.language (language)is equivalent toBasic.languageElement matches Basic element path `Basic.language` (`Resource.language`), use that element instead.\nElement `Requirements.language` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.language` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nLanguage is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).
Requirements.text (text)is equivalent toBasic.textElement matches Basic element path `Basic.text` (`DomainResource.text`), use that element instead.\nElement `Requirements.text` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.text` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nContained resources do not have a narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.
Requirements.contained (contained)is equivalent toBasic.containedElement matches Basic element path `Basic.contained` (`DomainResource.contained`), use that element instead.\nElement `Requirements.contained` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.contained` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nThis should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.
Requirements.identifier (identifier)is equivalent toBasic.identifierElement matches Basic element path `Basic.identifier` (`Basic.identifier`), use that element instead.\nElement `Requirements.identifier` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.identifier` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Group 2 Mapping from Requirements to R5: Canonical identifier for this Requirements, represented as a URI (globally unique) (new)

Source CodeCard.TypeRelationshipTarget CodeCard.TypeComment
Requirements.url0..1todomaps to wider conceptExtension0..1todoElement `Requirements.url` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.url` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nCan be a urn:uuid: or a urn:oid: but real http: addresses are preferred. Multiple instances may share the same URL if they have a distinct version.\n\nThe determination of when to create a new version of a resource (same url, new version) vs. defining a new artifact is up to the author. Considerations for making this decision are found in [Technical and Business Versions](https://hl7.org/fhir/resource..html#versions). \n\nIn some cases, the resource can no longer be found at the stated url, but the url itself cannot change. Implementations can use the [meta.source](https://hl7.org/fhir/resou.html#meta) element to indicate where the current master source of the resource can be found.

Group 3 Mapping from Requirements to R5: Business version of the Requirements (new)

Source CodeCard.TypeRelationshipTarget CodeCard.TypeComment
Requirements.version0..1todomaps to wider conceptExtension0..1todoElement `Requirements.version` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.version` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nThere may be different Requirements instances that have the same identifier but different versions. The version can be appended to the url in a reference to allow a reference to a particular business version of the Requirements with the format [url]|[version]. The version SHOULD NOT contain a '#' - see [Business Version](https://hl7.org/fhir/resource.h.html#bv-format).

Group 4 Mapping from Requirements to R5: How to compare versions (new)

Source CodeCard.TypeRelationshipTarget CodeCard.TypeComment
Requirements.versionAlgorithm[x]0..1todomaps to wider conceptExtension0..1todoElement `Requirements.versionAlgorithm[x]` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.versionAlgorithm[x]` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nIf set as a string, this is a FHIRPath expression that has two additional context variables passed in - %version1 and %version2 and will return a negative number if version1 is newer, a positive number if version2 and a 0 if the version ordering can't be successfully be determined.

Group 5 Mapping from Requirements to R5: Name for this Requirements (computer friendly) (new)

Source CodeCard.TypeRelationshipTarget CodeCard.TypeComment
Requirements.name0..1todomaps to wider conceptExtension0..1todoElement `Requirements.name` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.name` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nThe name is not expected to be globally unique. The name should be a simple alphanumeric type name to ensure that it is machine-processing friendly.

Group 6 Mapping from Requirements to R5: Name for this Requirements (human friendly) (new)

Source CodeCard.TypeRelationshipTarget CodeCard.TypeComment
Requirements.title0..1todomaps to wider conceptExtension0..1todoElement `Requirements.title` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.title` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nThis name does not need to be machine-processing friendly and may contain punctuation, white-space, etc.

Group 7 Mapping from Requirements to R5: draft | active | retired | unknown (new)

Source CodeCard.TypeRelationshipTarget CodeCard.TypeComment
Requirements.status1..1todomaps to wider conceptExtension1..1todoElement `Requirements.status` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.status` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nAllows filtering of Requirements that are appropriate for use versus not.\n\nSee guidance around (not) making local changes to elements [here](https://hl7.org/fhir/canonicalreso.html#localization).

Group 8 Mapping from Requirements to R5: For testing purposes, not real usage (new)

Source CodeCard.TypeRelationshipTarget CodeCard.TypeComment
Requirements.experimental0..1todomaps to wider conceptExtension0..1todoElement `Requirements.experimental` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.experimental` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nAllows filtering of Requirements that are appropriate for use versus not.

Group 9 Mapping from Requirements to R5: Date last changed (new)

Source CodeCard.TypeRelationshipTarget CodeCard.TypeComment
Requirements.date0..1todomaps to wider conceptExtension0..1todoElement `Requirements.date` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.date` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nNote that this is not the same as the resource last-modified-date, since the resource may be a secondary representation of the Requirements. Additional specific dates may be added as extensions or be found by consulting Provenances associated with past versions of the resource.\n\nSee guidance around (not) making local changes to elements [here](https://hl7.org/fhir/canonicalreso.html#localization).

Group 10 Mapping from Requirements to R5: Name of the publisher/steward (organization or individual) (new)

Source CodeCard.TypeRelationshipTarget CodeCard.TypeComment
Requirements.publisher0..1todomaps to wider conceptExtension0..1todoElement `Requirements.publisher` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.publisher` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nUsually an organization but may be an individual. The publisher (or steward) of the Requirements is the organization or individual primarily responsible for the maintenance and upkeep of the Requirements. This is not necessarily the same individual or organization that developed and initially authored the content. The publisher is the primary point of contact for questions or issues with the Requirements. This item SHOULD be populated unless the information is available from context.

Group 11 Mapping from Requirements to R5: Contact details for the publisher (new)

Source CodeCard.TypeRelationshipTarget CodeCard.TypeComment
Requirements.contact0..*todomaps to wider conceptExtension0..*todoElement `Requirements.contact` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.contact` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nMay be a web site, an email address, a telephone number, etc.\n\nSee guidance around (not) making local changes to elements [here](https://hl7.org/fhir/canonicalreso.html#localization).

Group 12 Mapping from Requirements to R5: Natural language description of the requirements (new)

Source CodeCard.TypeRelationshipTarget CodeCard.TypeComment
Requirements.description0..1todomaps to wider conceptExtension0..1todoElement `Requirements.description` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.description` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nThis description can be used for a general description of the requirements, and which covers why it was defined.

Group 13 Mapping from Requirements to R5: The context that the content is intended to support (new)

Source CodeCard.TypeRelationshipTarget CodeCard.TypeComment
Requirements.useContext0..*todomaps to wider conceptExtension0..*todoElement `Requirements.useContext` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.useContext` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nWhen multiple useContexts are specified, there is no expectation that all or any of the contexts apply.

Group 14 Mapping from Requirements to R5: Intended jurisdiction for Requirements (if applicable) (new)

Source CodeCard.TypeRelationshipTarget CodeCard.TypeComment
Requirements.jurisdiction0..*todomaps to wider conceptExtension0..*todoElement `Requirements.jurisdiction` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.jurisdiction` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nElement `Requirements.jurisdiction` has been flagged as deprecated.\nIt may be possible for the Requirements to be used in jurisdictions other than those for which it was originally designed or intended\n\nDEPRECATION NOTE: For consistency, implementations are encouraged to migrate to using the new 'jurisdiction' code in the useContext element. (I.e. useContext.code indicating http://terminology.hl7.org/CodeSystem/usage-context-type#jurisdiction and useContext.valueCodeableConcept indicating the jurisdiction.).

Group 15 Mapping from Requirements to R5: Why this Requirements is defined (new)

Source CodeCard.TypeRelationshipTarget CodeCard.TypeComment
Requirements.purpose0..1todomaps to wider conceptExtension0..1todoElement `Requirements.purpose` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.purpose` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nThis element does not describe the usage of the Requirements. Instead, it provides traceability of ''why'' the resource is either needed or ''why'' it is defined as it is. This may be used to point to source materials or specifications that drove the structure of this Requirements.

Group 16 Mapping from Requirements to R5: Use and/or publishing restrictions (new)

Source CodeCard.TypeRelationshipTarget CodeCard.TypeComment
Requirements.copyright0..1todomaps to wider conceptExtension0..1todoElement `Requirements.copyright` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.copyright` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\n...

Group 17 Mapping from Requirements to R5: Copyright holder and year(s) (new)

Source CodeCard.TypeRelationshipTarget CodeCard.TypeComment
Requirements.copyrightLabel0..1todomaps to wider conceptExtension0..1todoElement `Requirements.copyrightLabel` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.copyrightLabel` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nThe (c) symbol should NOT be included in this string. It will be added by software when rendering the notation. Full details about licensing, restrictions, warrantees, etc. goes in the more general 'copyright' element.

Group 18 Mapping from Requirements to R5: Other set of Requirements this builds on (new)

Source CodeCard.TypeRelationshipTarget CodeCard.TypeComment
Requirements.derivedFrommaps to wider conceptExtension0..*todoElement `Requirements.derivedFrom` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.derivedFrom` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nExisting statements (by key) may be narrowed or clarified, and additional statements added.

Group 19 Mapping from Requirements to R5: External artifact (rule/document etc. that) created this set of requirements (new)

Source CodeCard.TypeRelationshipTarget CodeCard.TypeComment
Requirements.referencemaps to wider conceptExtension0..*todoElement `Requirements.reference` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.reference` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Group 20 Mapping from Requirements to R5: Actor for these requirements (new)

Source CodeCard.TypeRelationshipTarget CodeCard.TypeComment
Requirements.actormaps to wider conceptExtension0..*todoElement `Requirements.actor` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.actor` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nIf more than one actor is specified, then it's up to the statements to describe in narrative if they don't apply to all actors.

Group 21 Mapping from Requirements to R5: Actual statement as markdown (new)

Source CodeCard.TypeRelationshipTarget CodeCard.TypeComment
Requirements.statement0..*todomaps to wider conceptExtension0..*todoElement `Requirements.statement` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.statement` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Requirements.statement.key1..1todomaps to wider conceptExtension.extension:key1..1todoElement `Requirements.statement.key` is part of an existing definition because parent element `Requirements.statement` requires a cross-version extension.\nElement `Requirements.statement.key` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.statement.key` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nRefer directly to the statement by {url}#{key}
Requirements.statement.label0..1todomaps to wider conceptExtension.extension:label0..1todoElement `Requirements.statement.label` is part of an existing definition because parent element `Requirements.statement` requires a cross-version extension.\nElement `Requirements.statement.label` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.statement.label` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nThe key is intended for computers, while this is intended for humans. In its absence, the key should be convenient for a human to say (e.g. not a UUID)
Requirements.statement.conformance0..*todomaps to wider conceptExtension.extension:conformance0..*todoElement `Requirements.statement.conformance` is part of an existing definition because parent element `Requirements.statement` requires a cross-version extension.\nElement `Requirements.statement.conformance` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.statement.conformance` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nThe conformance code is extracted from the requirement to make indexing and display easier. The requirement needs to express the conformance verbs directly in the markdown content. It's not unusual to mix verbs in a single sentence (e.g. System SHALL do X and SHOULD do Y)
Requirements.statement.conditionality0..1todomaps to wider conceptExtension.extension:conditionality0..1todoElement `Requirements.statement.conditionality` is part of an existing definition because parent element `Requirements.statement` requires a cross-version extension.\nElement `Requirements.statement.conditionality` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.statement.conditionality` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nThere is no intent that the conditional statement by evaluatable
Requirements.statement.requirement1..1todomaps to wider conceptExtension.extension:requirement1..1todoElement `Requirements.statement.requirement` is part of an existing definition because parent element `Requirements.statement` requires a cross-version extension.\nElement `Requirements.statement.requirement` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.statement.requirement` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Requirements.statement.derivedFrom0..1todomaps to wider conceptExtension.extension:derivedFrom0..1todoElement `Requirements.statement.derivedFrom` is part of an existing definition because parent element `Requirements.statement` requires a cross-version extension.\nElement `Requirements.statement.derivedFrom` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.statement.derivedFrom` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nThis can be just a key, if there is only one matching statement in the requirements statements referenced in Requirements.derivedFrom. If there is more than one, it should be in the format ```url#key```
Requirements.statement.parent0..1todomaps to wider conceptExtension.extension:parent0..1todoElement `Requirements.statement.parent` is part of an existing definition because parent element `Requirements.statement` requires a cross-version extension.\nElement `Requirements.statement.parent` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.statement.parent` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nFollows the same convention as statement.derivedFrom, where a reference is the canonical of the Requirements followed by '#' and the 'key' of the specific requirement.
Requirements.statement.satisfiedBymaps to wider conceptExtension.extension:satisfiedBy0..*todoElement `Requirements.statement.satisfiedBy` is part of an existing definition because parent element `Requirements.statement` requires a cross-version extension.\nElement `Requirements.statement.satisfiedBy` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.statement.satisfiedBy` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nThis is for use when the requirement is met be a pre-existing artifact e.g. a rule that's met by the base FHIR spec, or a national implementation guide.
Requirements.statement.referencemaps to wider conceptExtension.extension:reference0..*todoElement `Requirements.statement.reference` is part of an existing definition because parent element `Requirements.statement` requires a cross-version extension.\nElement `Requirements.statement.reference` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.statement.reference` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Requirements.statement.source0..*todomaps to wider conceptExtension.extension:source0..*todoElement `Requirements.statement.source` is part of an existing definition because parent element `Requirements.statement` requires a cross-version extension.\nElement `Requirements.statement.source` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.statement.source` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
" }, "extension" : [{ "url" : "http://hl7.org/fhir/StructureDefinition/structuredefinition-wg", "valueCode" : "fhir" }, { "url" : "http://hl7.org/fhir/StructureDefinition/structuredefinition-fmm", "valueInteger" : 0, "_valueInteger" : { "extension" : [{ "url" : "http://hl7.org/fhir/StructureDefinition/structuredefinition-conformance-derivedFrom", "valueUri" : "http://hl7.org/fhir/uv/xver/ImplementationGuide/hl7.fhir.uv.xver-r5.r3" }] } }, { "url" : "http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status", "valueCode" : "trial-use", "_valueCode" : { "extension" : [{ "url" : "http://hl7.org/fhir/StructureDefinition/structuredefinition-conformance-derivedFrom", "valueUri" : "http://hl7.org/fhir/uv/xver/ImplementationGuide/hl7.fhir.uv.xver-r5.r3" }] } }], "url" : "http://hl7.org/fhir/uv/xver/ConceptMap/R5-Requirements-element-map-to-R3", "version" : "0.1.0", "name" : "R5RequirementsElementMapToR3", "title" : "Cross-version mapping for FHIR R5 Requirements to FHIR STU3 Basic", "status" : "active", "experimental" : false, "date" : "2026-03-17T16:05:20.4790083-05:00", "contact" : [{ "name" : "FHIR Infrastructure", "telecom" : [{ "system" : "url", "value" : "http://www.hl7.org/Special/committees/fiwg" }] }], "description" : "This ConceptMap represents cross-version mappings for elements from a FHIR R5 Requirements to FHIR STU3.", "jurisdiction" : [{ "coding" : [{ "system" : "http://unstats.un.org/unsd/methods/m49/m49.htm", "code" : "001", "display" : "World" }] }], "sourceUri" : "http://hl7.org/fhir/5.0", "targetUri" : "http://hl7.org/fhir/3.0", "group" : [{ "source" : "http://hl7.org/fhir/StructureDefinition/Requirements", "sourceVersion" : "5.0.0", "target" : "http://hl7.org/fhir/StructureDefinition/Basic", "targetVersion" : "3.0.2", "element" : [{ "code" : "Requirements.meta", "display" : "meta", "target" : [{ "modifierExtension" : [{ "url" : "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence", "valueCode" : "equivalent" }], "code" : "Basic.meta", "display" : "Basic.meta", "equivalence" : "equivalent", "comment" : "Element matches Basic element path `Basic.meta` (`Resource.meta`), use that element instead.\nElement `Requirements.meta` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.meta` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)." }] }, { "code" : "Requirements.implicitRules", "display" : "implicitRules", "target" : [{ "modifierExtension" : [{ "url" : "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence", "valueCode" : "equivalent" }], "code" : "Basic.implicitRules", "display" : "Basic.implicitRules", "equivalence" : "equivalent", "comment" : "Element matches Basic element path `Basic.implicitRules` (`Resource.implicitRules`), use that element instead.\nElement `Requirements.implicitRules` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.implicitRules` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nAsserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc." }] }, { "code" : "Requirements.language", "display" : "language", "target" : [{ "modifierExtension" : [{ "url" : "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence", "valueCode" : "equivalent" }], "code" : "Basic.language", "display" : "Basic.language", "equivalence" : "equivalent", "comment" : "Element matches Basic element path `Basic.language` (`Resource.language`), use that element instead.\nElement `Requirements.language` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.language` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nLanguage is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute)." }] }, { "code" : "Requirements.text", "display" : "text", "target" : [{ "modifierExtension" : [{ "url" : "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence", "valueCode" : "equivalent" }], "code" : "Basic.text", "display" : "Basic.text", "equivalence" : "equivalent", "comment" : "Element matches Basic element path `Basic.text` (`DomainResource.text`), use that element instead.\nElement `Requirements.text` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.text` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nContained resources do not have a narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a \"text blob\" or where text is additionally entered raw or narrated and encoded information is added later." }] }, { "code" : "Requirements.contained", "display" : "contained", "target" : [{ "modifierExtension" : [{ "url" : "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence", "valueCode" : "equivalent" }], "code" : "Basic.contained", "display" : "Basic.contained", "equivalence" : "equivalent", "comment" : "Element matches Basic element path `Basic.contained` (`DomainResource.contained`), use that element instead.\nElement `Requirements.contained` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.contained` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nThis should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels." }] }, { "code" : "Requirements.identifier", "display" : "identifier", "target" : [{ "modifierExtension" : [{ "url" : "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence", "valueCode" : "equivalent" }], "code" : "Basic.identifier", "display" : "Basic.identifier", "equivalence" : "equivalent", "comment" : "Element matches Basic element path `Basic.identifier` (`Basic.identifier`), use that element instead.\nElement `Requirements.identifier` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.identifier` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)." }] }] }, { "source" : "http://hl7.org/fhir/StructureDefinition/Requirements", "sourceVersion" : "5.0.0", "target" : "http://hl7.org/fhir/5.0/StructureDefinition/extension-Requirements.url", "targetVersion" : "0.1.0", "element" : [{ "code" : "Requirements.url", "display" : "url", "target" : [{ "modifierExtension" : [{ "url" : "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence", "valueCode" : "wider" }], "code" : "Extension", "equivalence" : "wider", "comment" : "Element `Requirements.url` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.url` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nCan be a urn:uuid: or a urn:oid: but real http: addresses are preferred. Multiple instances may share the same URL if they have a distinct version.\n\nThe determination of when to create a new version of a resource (same url, new version) vs. defining a new artifact is up to the author. Considerations for making this decision are found in [Technical and Business Versions](https://hl7.org/fhir/resource..html#versions). \n\nIn some cases, the resource can no longer be found at the stated url, but the url itself cannot change. Implementations can use the [meta.source](https://hl7.org/fhir/resou.html#meta) element to indicate where the current master source of the resource can be found." }] }] }, { "source" : "http://hl7.org/fhir/StructureDefinition/Requirements", "sourceVersion" : "5.0.0", "target" : "http://hl7.org/fhir/5.0/StructureDefinition/extension-Requirements.version", "targetVersion" : "0.1.0", "element" : [{ "code" : "Requirements.version", "display" : "version", "target" : [{ "modifierExtension" : [{ "url" : "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence", "valueCode" : "wider" }], "code" : "Extension", "equivalence" : "wider", "comment" : "Element `Requirements.version` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.version` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nThere may be different Requirements instances that have the same identifier but different versions. The version can be appended to the url in a reference to allow a reference to a particular business version of the Requirements with the format [url]|[version]. The version SHOULD NOT contain a '#' - see [Business Version](https://hl7.org/fhir/resource.h.html#bv-format)." }] }] }, { "source" : "http://hl7.org/fhir/StructureDefinition/Requirements", "sourceVersion" : "5.0.0", "target" : "http://hl7.org/fhir/5.0/StructureDefinition/extension-Requirements.versionAlgorithm", "targetVersion" : "0.1.0", "element" : [{ "code" : "Requirements.versionAlgorithm[x]", "display" : "versionAlgorithm[x]", "target" : [{ "modifierExtension" : [{ "url" : "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence", "valueCode" : "wider" }], "code" : "Extension", "equivalence" : "wider", "comment" : "Element `Requirements.versionAlgorithm[x]` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.versionAlgorithm[x]` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nIf set as a string, this is a FHIRPath expression that has two additional context variables passed in - %version1 and %version2 and will return a negative number if version1 is newer, a positive number if version2 and a 0 if the version ordering can't be successfully be determined." }] }] }, { "source" : "http://hl7.org/fhir/StructureDefinition/Requirements", "sourceVersion" : "5.0.0", "target" : "http://hl7.org/fhir/5.0/StructureDefinition/extension-Requirements.name", "targetVersion" : "0.1.0", "element" : [{ "code" : "Requirements.name", "display" : "name", "target" : [{ "modifierExtension" : [{ "url" : "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence", "valueCode" : "wider" }], "code" : "Extension", "equivalence" : "wider", "comment" : "Element `Requirements.name` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.name` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nThe name is not expected to be globally unique. The name should be a simple alphanumeric type name to ensure that it is machine-processing friendly." }] }] }, { "source" : "http://hl7.org/fhir/StructureDefinition/Requirements", "sourceVersion" : "5.0.0", "target" : "http://hl7.org/fhir/5.0/StructureDefinition/extension-Requirements.title", "targetVersion" : "0.1.0", "element" : [{ "code" : "Requirements.title", "display" : "title", "target" : [{ "modifierExtension" : [{ "url" : "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence", "valueCode" : "wider" }], "code" : "Extension", "equivalence" : "wider", "comment" : "Element `Requirements.title` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.title` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nThis name does not need to be machine-processing friendly and may contain punctuation, white-space, etc." }] }] }, { "source" : "http://hl7.org/fhir/StructureDefinition/Requirements", "sourceVersion" : "5.0.0", "target" : "http://hl7.org/fhir/5.0/StructureDefinition/extension-Requirements.status", "targetVersion" : "0.1.0", "element" : [{ "code" : "Requirements.status", "display" : "status", "target" : [{ "modifierExtension" : [{ "url" : "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence", "valueCode" : "wider" }], "code" : "Extension", "equivalence" : "wider", "comment" : "Element `Requirements.status` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.status` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nAllows filtering of Requirements that are appropriate for use versus not.\n\nSee guidance around (not) making local changes to elements [here](https://hl7.org/fhir/canonicalreso.html#localization)." }] }] }, { "source" : "http://hl7.org/fhir/StructureDefinition/Requirements", "sourceVersion" : "5.0.0", "target" : "http://hl7.org/fhir/5.0/StructureDefinition/extension-Requirements.experimental", "targetVersion" : "0.1.0", "element" : [{ "code" : "Requirements.experimental", "display" : "experimental", "target" : [{ "modifierExtension" : [{ "url" : "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence", "valueCode" : "wider" }], "code" : "Extension", "equivalence" : "wider", "comment" : "Element `Requirements.experimental` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.experimental` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nAllows filtering of Requirements that are appropriate for use versus not." }] }] }, { "source" : "http://hl7.org/fhir/StructureDefinition/Requirements", "sourceVersion" : "5.0.0", "target" : "http://hl7.org/fhir/5.0/StructureDefinition/extension-Requirements.date", "targetVersion" : "0.1.0", "element" : [{ "code" : "Requirements.date", "display" : "date", "target" : [{ "modifierExtension" : [{ "url" : "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence", "valueCode" : "wider" }], "code" : "Extension", "equivalence" : "wider", "comment" : "Element `Requirements.date` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.date` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nNote that this is not the same as the resource last-modified-date, since the resource may be a secondary representation of the Requirements. Additional specific dates may be added as extensions or be found by consulting Provenances associated with past versions of the resource.\n\nSee guidance around (not) making local changes to elements [here](https://hl7.org/fhir/canonicalreso.html#localization)." }] }] }, { "source" : "http://hl7.org/fhir/StructureDefinition/Requirements", "sourceVersion" : "5.0.0", "target" : "http://hl7.org/fhir/5.0/StructureDefinition/extension-Requirements.publisher", "targetVersion" : "0.1.0", "element" : [{ "code" : "Requirements.publisher", "display" : "publisher", "target" : [{ "modifierExtension" : [{ "url" : "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence", "valueCode" : "wider" }], "code" : "Extension", "equivalence" : "wider", "comment" : "Element `Requirements.publisher` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.publisher` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nUsually an organization but may be an individual. The publisher (or steward) of the Requirements is the organization or individual primarily responsible for the maintenance and upkeep of the Requirements. This is not necessarily the same individual or organization that developed and initially authored the content. The publisher is the primary point of contact for questions or issues with the Requirements. This item SHOULD be populated unless the information is available from context." }] }] }, { "source" : "http://hl7.org/fhir/StructureDefinition/Requirements", "sourceVersion" : "5.0.0", "target" : "http://hl7.org/fhir/5.0/StructureDefinition/extension-Requirements.contact", "targetVersion" : "0.1.0", "element" : [{ "code" : "Requirements.contact", "display" : "contact", "target" : [{ "modifierExtension" : [{ "url" : "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence", "valueCode" : "wider" }], "code" : "Extension", "equivalence" : "wider", "comment" : "Element `Requirements.contact` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.contact` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nMay be a web site, an email address, a telephone number, etc.\n\nSee guidance around (not) making local changes to elements [here](https://hl7.org/fhir/canonicalreso.html#localization)." }] }] }, { "source" : "http://hl7.org/fhir/StructureDefinition/Requirements", "sourceVersion" : "5.0.0", "target" : "http://hl7.org/fhir/5.0/StructureDefinition/extension-Requirements.description", "targetVersion" : "0.1.0", "element" : [{ "code" : "Requirements.description", "display" : "description", "target" : [{ "modifierExtension" : [{ "url" : "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence", "valueCode" : "wider" }], "code" : "Extension", "equivalence" : "wider", "comment" : "Element `Requirements.description` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.description` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nThis description can be used for a general description of the requirements, and which covers why it was defined." }] }] }, { "source" : "http://hl7.org/fhir/StructureDefinition/Requirements", "sourceVersion" : "5.0.0", "target" : "http://hl7.org/fhir/5.0/StructureDefinition/extension-Requirements.useContext", "targetVersion" : "0.1.0", "element" : [{ "code" : "Requirements.useContext", "display" : "useContext", "target" : [{ "modifierExtension" : [{ "url" : "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence", "valueCode" : "wider" }], "code" : "Extension", "equivalence" : "wider", "comment" : "Element `Requirements.useContext` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.useContext` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nWhen multiple useContexts are specified, there is no expectation that all or any of the contexts apply." }] }] }, { "source" : "http://hl7.org/fhir/StructureDefinition/Requirements", "sourceVersion" : "5.0.0", "target" : "http://hl7.org/fhir/5.0/StructureDefinition/extension-Requirements.jurisdiction", "targetVersion" : "0.1.0", "element" : [{ "code" : "Requirements.jurisdiction", "display" : "jurisdiction", "target" : [{ "modifierExtension" : [{ "url" : "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence", "valueCode" : "wider" }], "code" : "Extension", "equivalence" : "wider", "comment" : "Element `Requirements.jurisdiction` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.jurisdiction` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nElement `Requirements.jurisdiction` has been flagged as deprecated.\nIt may be possible for the Requirements to be used in jurisdictions other than those for which it was originally designed or intended\n\nDEPRECATION NOTE: For consistency, implementations are encouraged to migrate to using the new 'jurisdiction' code in the useContext element. (I.e. useContext.code indicating http://terminology.hl7.org/CodeSystem/usage-context-type#jurisdiction and useContext.valueCodeableConcept indicating the jurisdiction.)." }] }] }, { "source" : "http://hl7.org/fhir/StructureDefinition/Requirements", "sourceVersion" : "5.0.0", "target" : "http://hl7.org/fhir/5.0/StructureDefinition/extension-Requirements.purpose", "targetVersion" : "0.1.0", "element" : [{ "code" : "Requirements.purpose", "display" : "purpose", "target" : [{ "modifierExtension" : [{ "url" : "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence", "valueCode" : "wider" }], "code" : "Extension", "equivalence" : "wider", "comment" : "Element `Requirements.purpose` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.purpose` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nThis element does not describe the usage of the Requirements. Instead, it provides traceability of ''why'' the resource is either needed or ''why'' it is defined as it is. This may be used to point to source materials or specifications that drove the structure of this Requirements." }] }] }, { "source" : "http://hl7.org/fhir/StructureDefinition/Requirements", "sourceVersion" : "5.0.0", "target" : "http://hl7.org/fhir/5.0/StructureDefinition/extension-Requirements.copyright", "targetVersion" : "0.1.0", "element" : [{ "code" : "Requirements.copyright", "display" : "copyright", "target" : [{ "modifierExtension" : [{ "url" : "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence", "valueCode" : "wider" }], "code" : "Extension", "equivalence" : "wider", "comment" : "Element `Requirements.copyright` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.copyright` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\n..." }] }] }, { "source" : "http://hl7.org/fhir/StructureDefinition/Requirements", "sourceVersion" : "5.0.0", "target" : "http://hl7.org/fhir/5.0/StructureDefinition/extension-Requirements.copyrightLabel", "targetVersion" : "0.1.0", "element" : [{ "code" : "Requirements.copyrightLabel", "display" : "copyrightLabel", "target" : [{ "modifierExtension" : [{ "url" : "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence", "valueCode" : "wider" }], "code" : "Extension", "equivalence" : "wider", "comment" : "Element `Requirements.copyrightLabel` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.copyrightLabel` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nThe (c) symbol should NOT be included in this string. It will be added by software when rendering the notation. Full details about licensing, restrictions, warrantees, etc. goes in the more general 'copyright' element." }] }] }, { "source" : "http://hl7.org/fhir/StructureDefinition/Requirements", "sourceVersion" : "5.0.0", "target" : "http://hl7.org/fhir/5.0/StructureDefinition/extension-Requirements.derivedFrom", "targetVersion" : "0.1.0", "element" : [{ "code" : "Requirements.derivedFrom", "display" : "derivedFrom", "target" : [{ "modifierExtension" : [{ "url" : "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence", "valueCode" : "wider" }], "code" : "Extension", "equivalence" : "wider", "comment" : "Element `Requirements.derivedFrom` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.derivedFrom` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nExisting statements (by key) may be narrowed or clarified, and additional statements added." }] }] }, { "source" : "http://hl7.org/fhir/StructureDefinition/Requirements", "sourceVersion" : "5.0.0", "target" : "http://hl7.org/fhir/5.0/StructureDefinition/extension-Requirements.reference", "targetVersion" : "0.1.0", "element" : [{ "code" : "Requirements.reference", "display" : "reference", "target" : [{ "modifierExtension" : [{ "url" : "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence", "valueCode" : "wider" }], "code" : "Extension", "equivalence" : "wider", "comment" : "Element `Requirements.reference` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.reference` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)." }] }] }, { "source" : "http://hl7.org/fhir/StructureDefinition/Requirements", "sourceVersion" : "5.0.0", "target" : "http://hl7.org/fhir/5.0/StructureDefinition/extension-Requirements.actor", "targetVersion" : "0.1.0", "element" : [{ "code" : "Requirements.actor", "display" : "actor", "target" : [{ "modifierExtension" : [{ "url" : "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence", "valueCode" : "wider" }], "code" : "Extension", "equivalence" : "wider", "comment" : "Element `Requirements.actor` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.actor` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nIf more than one actor is specified, then it's up to the statements to describe in narrative if they don't apply to all actors." }] }] }, { "source" : "http://hl7.org/fhir/StructureDefinition/Requirements", "sourceVersion" : "5.0.0", "target" : "http://hl7.org/fhir/5.0/StructureDefinition/extension-Requirements.statement", "targetVersion" : "0.1.0", "element" : [{ "code" : "Requirements.statement", "display" : "statement", "target" : [{ "modifierExtension" : [{ "url" : "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence", "valueCode" : "wider" }], "code" : "Extension", "equivalence" : "wider", "comment" : "Element `Requirements.statement` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.statement` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)." }] }, { "code" : "Requirements.statement.key", "display" : "key", "target" : [{ "modifierExtension" : [{ "url" : "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence", "valueCode" : "wider" }], "code" : "Extension.extension:key", "equivalence" : "wider", "comment" : "Element `Requirements.statement.key` is part of an existing definition because parent element `Requirements.statement` requires a cross-version extension.\nElement `Requirements.statement.key` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.statement.key` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nRefer directly to the statement by {url}#{key}" }] }, { "code" : "Requirements.statement.label", "display" : "label", "target" : [{ "modifierExtension" : [{ "url" : "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence", "valueCode" : "wider" }], "code" : "Extension.extension:label", "equivalence" : "wider", "comment" : "Element `Requirements.statement.label` is part of an existing definition because parent element `Requirements.statement` requires a cross-version extension.\nElement `Requirements.statement.label` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.statement.label` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nThe key is intended for computers, while this is intended for humans. In its absence, the key should be convenient for a human to say (e.g. not a UUID)" }] }, { "code" : "Requirements.statement.conformance", "display" : "conformance", "target" : [{ "modifierExtension" : [{ "url" : "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence", "valueCode" : "wider" }], "code" : "Extension.extension:conformance", "equivalence" : "wider", "comment" : "Element `Requirements.statement.conformance` is part of an existing definition because parent element `Requirements.statement` requires a cross-version extension.\nElement `Requirements.statement.conformance` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.statement.conformance` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nThe conformance code is extracted from the requirement to make indexing and display easier. The requirement needs to express the conformance verbs directly in the markdown content. It's not unusual to mix verbs in a single sentence (e.g. System SHALL do X and SHOULD do Y)" }] }, { "code" : "Requirements.statement.conditionality", "display" : "conditionality", "target" : [{ "modifierExtension" : [{ "url" : "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence", "valueCode" : "wider" }], "code" : "Extension.extension:conditionality", "equivalence" : "wider", "comment" : "Element `Requirements.statement.conditionality` is part of an existing definition because parent element `Requirements.statement` requires a cross-version extension.\nElement `Requirements.statement.conditionality` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.statement.conditionality` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nThere is no intent that the conditional statement by evaluatable" }] }, { "code" : "Requirements.statement.requirement", "display" : "requirement", "target" : [{ "modifierExtension" : [{ "url" : "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence", "valueCode" : "wider" }], "code" : "Extension.extension:requirement", "equivalence" : "wider", "comment" : "Element `Requirements.statement.requirement` is part of an existing definition because parent element `Requirements.statement` requires a cross-version extension.\nElement `Requirements.statement.requirement` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.statement.requirement` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)." }] }, { "code" : "Requirements.statement.derivedFrom", "display" : "derivedFrom", "target" : [{ "modifierExtension" : [{ "url" : "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence", "valueCode" : "wider" }], "code" : "Extension.extension:derivedFrom", "equivalence" : "wider", "comment" : "Element `Requirements.statement.derivedFrom` is part of an existing definition because parent element `Requirements.statement` requires a cross-version extension.\nElement `Requirements.statement.derivedFrom` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.statement.derivedFrom` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nThis can be just a key, if there is only one matching statement in the requirements statements referenced in Requirements.derivedFrom. If there is more than one, it should be in the format ```url#key```" }] }, { "code" : "Requirements.statement.parent", "display" : "parent", "target" : [{ "modifierExtension" : [{ "url" : "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence", "valueCode" : "wider" }], "code" : "Extension.extension:parent", "equivalence" : "wider", "comment" : "Element `Requirements.statement.parent` is part of an existing definition because parent element `Requirements.statement` requires a cross-version extension.\nElement `Requirements.statement.parent` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.statement.parent` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nFollows the same convention as statement.derivedFrom, where a reference is the canonical of the Requirements followed by '#' and the 'key' of the specific requirement." }] }, { "code" : "Requirements.statement.satisfiedBy", "display" : "satisfiedBy", "target" : [{ "modifierExtension" : [{ "url" : "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence", "valueCode" : "wider" }], "code" : "Extension.extension:satisfiedBy", "equivalence" : "wider", "comment" : "Element `Requirements.statement.satisfiedBy` is part of an existing definition because parent element `Requirements.statement` requires a cross-version extension.\nElement `Requirements.statement.satisfiedBy` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.statement.satisfiedBy` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nThis is for use when the requirement is met be a pre-existing artifact e.g. a rule that's met by the base FHIR spec, or a national implementation guide." }] }, { "code" : "Requirements.statement.reference", "display" : "reference", "target" : [{ "modifierExtension" : [{ "url" : "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence", "valueCode" : "wider" }], "code" : "Extension.extension:reference", "equivalence" : "wider", "comment" : "Element `Requirements.statement.reference` is part of an existing definition because parent element `Requirements.statement` requires a cross-version extension.\nElement `Requirements.statement.reference` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.statement.reference` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)." }] }, { "code" : "Requirements.statement.source", "display" : "source", "target" : [{ "modifierExtension" : [{ "url" : "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence", "valueCode" : "wider" }], "code" : "Extension.extension:source", "equivalence" : "wider", "comment" : "Element `Requirements.statement.source` is part of an existing definition because parent element `Requirements.statement` requires a cross-version extension.\nElement `Requirements.statement.source` is not mapped to FHIR STU3, since FHIR R5 `Requirements` is not mapped.\nElement `Requirements.statement.source` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)." }] }] }] }