Extensions for Using Data Elements from FHIR R4B in FHIR STU3
0.1.0 - STU International flag

Extensions for Using Data Elements from FHIR R4B in FHIR STU3 - Downloaded Version null See the Directory of published versions

Resource Profile: Profile_R4B_NutritionProduct_R3 - Detailed Descriptions

Page standards status: Trial-use Maturity Level: 0

Definitions for the profile-NutritionProduct resource profile.

Guidance on how to interpret the contents of this table can be foundhere

0. Basic
Definition

Basic is used for handling concepts not yet defined in FHIR, narrative-only resources that don't map to an existing resource, and custom resources not appropriate for inclusion in the FHIR specification.

ShortResource for non-supported content
Control0..*
Alternate NamesZ-resource, Extension-resource, Custom-resource
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-1: If the resource is contained in another resource, it SHALL NOT contain any narrative (contained.text.empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource (contained.where(('#'+id in %resource.descendants().reference).not()).empty())
dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-1: If the resource is contained in another resource, it SHALL NOT contain any narrative (contained.text.empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource (contained.where(('#'+id in %resource.descendants().reference).not()).empty())
2. Basic.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element.

This element is labelled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation.

Control0..1
Typeuri
Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
4. Basic.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the resource. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional Content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Alternate Namesextensions, user content
SlicingThis element introduces a set of slices on Basic.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 6. Basic.extension:category
    Slice Namecategory
    Definition

    R4B: NutritionProduct.category (new:CodeableConcept)

    ShortR4B: A category or class of the nutrition product (halal, kosher, gluten free, vegan, etc) (new)
    Comments

    Element NutritionProduct.category is not mapped to FHIR STU3, since FHIR R4B NutritionProduct is not mapped. Element NutritionProduct.category has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension(R4B: A category or class of the nutrition product (halal, kosher, gluten free, vegan, etc) (new)) (Extension Type: CodeableConcept)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    8. Basic.extension:code
    Slice Namecode
    Definition

    R4B: NutritionProduct.code (new:CodeableConcept)

    ShortR4B: A code designating a specific type of nutritional product (new)
    Comments

    Element NutritionProduct.code is not mapped to FHIR STU3, since FHIR R4B NutritionProduct is not mapped. Element NutritionProduct.code has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(R4B: A code designating a specific type of nutritional product (new)) (Extension Type: CodeableConcept)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    10. Basic.extension:manufacturer
    Slice Namemanufacturer
    Definition

    R4B: NutritionProduct.manufacturer (new:Reference(Organization))

    ShortR4B: Manufacturer, representative or officially responsible for the product (new)
    Comments

    Element NutritionProduct.manufacturer is not mapped to FHIR STU3, since FHIR R4B NutritionProduct is not mapped. Element NutritionProduct.manufacturer has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension(R4B: Manufacturer, representative or officially responsible for the product (new)) (Extension Type: Reference(Cross-version Profile for R4B.Organization for use in FHIR STU3, Organization))
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    12. Basic.extension:nutrient
    Slice Namenutrient
    Definition

    R4B: NutritionProduct.nutrient (new:BackboneElement)

    ShortR4B: The product's nutritional information expressed by the nutrients (new)
    Comments

    Element NutritionProduct.nutrient is not mapped to FHIR STU3, since FHIR R4B NutritionProduct is not mapped. Element NutritionProduct.nutrient has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Note: This is a business identifier, not a resource identifier (see discussion). It is best practice for the identifier to only appear on a single resource instance, however business practices may occasionally dictate that multiple resource instances with the same identifier can exist - possibly even with different resource types. For example, multiple Patient and a Person resource instance might share the same social insurance number.

    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension(R4B: The product's nutritional information expressed by the nutrients (new)) (Complex Extension)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    14. Basic.extension:ingredient
    Slice Nameingredient
    Definition

    R4B: NutritionProduct.ingredient (new:BackboneElement)

    ShortR4B: Ingredients contained in this product (new)
    Comments

    Element NutritionProduct.ingredient is not mapped to FHIR STU3, since FHIR R4B NutritionProduct is not mapped. Element NutritionProduct.ingredient has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension(R4B: Ingredients contained in this product (new)) (Complex Extension)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    16. Basic.extension:knownAllergen
    Slice NameknownAllergen
    Definition

    R4B: NutritionProduct.knownAllergen (new:CodeableReference(Substance))

    ShortR4B: Known or suspected allergens that are a part of this product (new)
    Comments

    Element NutritionProduct.knownAllergen is not mapped to FHIR STU3, since FHIR R4B NutritionProduct is not mapped. Element NutritionProduct.knownAllergen has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension(R4B: Known or suspected allergens that are a part of this product (new)) (Complex Extension)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    18. Basic.extension:productCharacteristic
    Slice NameproductCharacteristic
    Definition

    R4B: NutritionProduct.productCharacteristic (new:BackboneElement)

    ShortR4B: Specifies descriptive properties of the nutrition product (new)
    Comments

    Element NutritionProduct.productCharacteristic is not mapped to FHIR STU3, since FHIR R4B NutritionProduct is not mapped. Element NutritionProduct.productCharacteristic has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension(R4B: Specifies descriptive properties of the nutrition product (new)) (Complex Extension)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    20. Basic.extension:instance
    Slice Nameinstance
    Definition

    R4B: NutritionProduct.instance (new:BackboneElement)

    ShortR4B: One or several physical instances or occurrences of the nutrition product (new)
    Comments

    Element NutritionProduct.instance is not mapped to FHIR STU3, since FHIR R4B NutritionProduct is not mapped. Element NutritionProduct.instance has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(R4B: One or several physical instances or occurrences of the nutrition product (new)) (Complex Extension)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    22. Basic.extension:note
    Slice Namenote
    Definition

    R4B: NutritionProduct.note (new:Annotation)

    ShortR4B: Comments made about the product (new)
    Comments

    Element NutritionProduct.note is not mapped to FHIR STU3, since FHIR R4B NutritionProduct is not mapped. Element NutritionProduct.note has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension(R4B: Comments made about the product (new)) (Extension Type: Annotation)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    24. Basic.modifierExtension
    Definition

    An Extension


    May be used to represent additional information that is not part of the basic definition of the resource, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    ShortExtensionExtensions that cannot be ignored
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
    Alternate Namesextensions, user content
    SlicingThis element introduces a set of slices on Basic.modifierExtension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • 26. Basic.modifierExtension:status
      Slice Namestatus
      Definition

      R4B: NutritionProduct.status (new:code)

      ShortR4B: active | inactive | entered-in-error (new)
      Comments

      Element NutritionProduct.status is not mapped to FHIR STU3, since FHIR R4B NutritionProduct is not mapped. Element NutritionProduct.status has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Unknown does not represent "other" - one of the defined statuses must apply. Unknown is used when the authoring system is not sure what the current status is.

      Control1..1
      This element is affected by the following invariants: ele-1
      TypeExtension(R4B: active | inactive | entered-in-error (new)) (Extension Type: code)
      Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      28. Basic.code
      Definition

      Identifies the 'type' of resource - equivalent to the resource name for other resources.

      ShortKind of Resource
      Comments

      Because resource references will only be able to indicate 'Basic', the type of reference will need to be specified in a Profile identified as part of the resource. Refer to the resource notes section for information on appropriate terminologies for this code.

      This element is labeled as a modifier because the it defines the meaning of the resource and cannot be ignored.

      Control1..1
      BindingFor example codes, see Basic Resource Typeshttp://hl7.org/fhir/ValueSet/basic-resource-type|3.0.2
      (example to http://hl7.org/fhir/ValueSet/basic-resource-type|3.0.2)

      Codes for identifying types of resources not yet defined by FHIR

      TypeCodeableConcept
      Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
      Summarytrue
      Requirements

      Must be able to distinguish different types of Basic resources.

      Guidance on how to interpret the contents of this table can be foundhere

      0. Basic
      2. Basic.extension
      Control0..*
      SlicingThis element introduces a set of slices on Basic.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 4. Basic.extension:category
        Slice Namecategory
        Definition

        R4B: NutritionProduct.category (new:CodeableConcept)

        ShortR4B: A category or class of the nutrition product (halal, kosher, gluten free, vegan, etc) (new)
        Comments

        Element NutritionProduct.category is not mapped to FHIR STU3, since FHIR R4B NutritionProduct is not mapped. Element NutritionProduct.category has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..*
        TypeExtension(R4B: A category or class of the nutrition product (halal, kosher, gluten free, vegan, etc) (new)) (Extension Type: CodeableConcept)
        6. Basic.extension:code
        Slice Namecode
        Definition

        R4B: NutritionProduct.code (new:CodeableConcept)

        ShortR4B: A code designating a specific type of nutritional product (new)
        Comments

        Element NutritionProduct.code is not mapped to FHIR STU3, since FHIR R4B NutritionProduct is not mapped. Element NutritionProduct.code has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..1
        TypeExtension(R4B: A code designating a specific type of nutritional product (new)) (Extension Type: CodeableConcept)
        8. Basic.extension:manufacturer
        Slice Namemanufacturer
        Definition

        R4B: NutritionProduct.manufacturer (new:Reference(Organization))

        ShortR4B: Manufacturer, representative or officially responsible for the product (new)
        Comments

        Element NutritionProduct.manufacturer is not mapped to FHIR STU3, since FHIR R4B NutritionProduct is not mapped. Element NutritionProduct.manufacturer has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..*
        TypeExtension(R4B: Manufacturer, representative or officially responsible for the product (new)) (Extension Type: Reference(Cross-version Profile for R4B.Organization for use in FHIR STU3, Organization))
        10. Basic.extension:nutrient
        Slice Namenutrient
        Definition

        R4B: NutritionProduct.nutrient (new:BackboneElement)

        ShortR4B: The product's nutritional information expressed by the nutrients (new)
        Comments

        Element NutritionProduct.nutrient is not mapped to FHIR STU3, since FHIR R4B NutritionProduct is not mapped. Element NutritionProduct.nutrient has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Note: This is a business identifier, not a resource identifier (see discussion). It is best practice for the identifier to only appear on a single resource instance, however business practices may occasionally dictate that multiple resource instances with the same identifier can exist - possibly even with different resource types. For example, multiple Patient and a Person resource instance might share the same social insurance number.

        Control0..*
        TypeExtension(R4B: The product's nutritional information expressed by the nutrients (new)) (Complex Extension)
        12. Basic.extension:ingredient
        Slice Nameingredient
        Definition

        R4B: NutritionProduct.ingredient (new:BackboneElement)

        ShortR4B: Ingredients contained in this product (new)
        Comments

        Element NutritionProduct.ingredient is not mapped to FHIR STU3, since FHIR R4B NutritionProduct is not mapped. Element NutritionProduct.ingredient has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..*
        TypeExtension(R4B: Ingredients contained in this product (new)) (Complex Extension)
        14. Basic.extension:knownAllergen
        Slice NameknownAllergen
        Definition

        R4B: NutritionProduct.knownAllergen (new:CodeableReference(Substance))

        ShortR4B: Known or suspected allergens that are a part of this product (new)
        Comments

        Element NutritionProduct.knownAllergen is not mapped to FHIR STU3, since FHIR R4B NutritionProduct is not mapped. Element NutritionProduct.knownAllergen has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..*
        TypeExtension(R4B: Known or suspected allergens that are a part of this product (new)) (Complex Extension)
        16. Basic.extension:productCharacteristic
        Slice NameproductCharacteristic
        Definition

        R4B: NutritionProduct.productCharacteristic (new:BackboneElement)

        ShortR4B: Specifies descriptive properties of the nutrition product (new)
        Comments

        Element NutritionProduct.productCharacteristic is not mapped to FHIR STU3, since FHIR R4B NutritionProduct is not mapped. Element NutritionProduct.productCharacteristic has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..*
        TypeExtension(R4B: Specifies descriptive properties of the nutrition product (new)) (Complex Extension)
        18. Basic.extension:instance
        Slice Nameinstance
        Definition

        R4B: NutritionProduct.instance (new:BackboneElement)

        ShortR4B: One or several physical instances or occurrences of the nutrition product (new)
        Comments

        Element NutritionProduct.instance is not mapped to FHIR STU3, since FHIR R4B NutritionProduct is not mapped. Element NutritionProduct.instance has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..1
        TypeExtension(R4B: One or several physical instances or occurrences of the nutrition product (new)) (Complex Extension)
        20. Basic.extension:note
        Slice Namenote
        Definition

        R4B: NutritionProduct.note (new:Annotation)

        ShortR4B: Comments made about the product (new)
        Comments

        Element NutritionProduct.note is not mapped to FHIR STU3, since FHIR R4B NutritionProduct is not mapped. Element NutritionProduct.note has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..*
        TypeExtension(R4B: Comments made about the product (new)) (Extension Type: Annotation)
        22. Basic.modifierExtension
        Control0..*
        SlicingThis element introduces a set of slices on Basic.modifierExtension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 24. Basic.modifierExtension:status
          Slice Namestatus
          Definition

          R4B: NutritionProduct.status (new:code)

          ShortR4B: active | inactive | entered-in-error (new)
          Comments

          Element NutritionProduct.status is not mapped to FHIR STU3, since FHIR R4B NutritionProduct is not mapped. Element NutritionProduct.status has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Unknown does not represent "other" - one of the defined statuses must apply. Unknown is used when the authoring system is not sure what the current status is.

          Control1..1
          TypeExtension(R4B: active | inactive | entered-in-error (new)) (Extension Type: code)

          Guidance on how to interpret the contents of this table can be foundhere

          0. Basic
          Definition

          Basic is used for handling concepts not yet defined in FHIR, narrative-only resources that don't map to an existing resource, and custom resources not appropriate for inclusion in the FHIR specification.

          ShortResource for non-supported content
          Control0..*
          Alternate NamesZ-resource, Extension-resource, Custom-resource
          Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
          dom-1: If the resource is contained in another resource, it SHALL NOT contain any narrative (contained.text.empty())
          dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
          dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource (contained.where(('#'+id in %resource.descendants().reference).not()).empty())
          2. Basic.id
          Definition

          The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

          ShortLogical id of this artifact
          Comments

          The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

          Control0..1
          Typeid
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          4. Basic.meta
          Definition

          The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content may not always be associated with version changes to the resource.

          ShortMetadata about the resource
          Control0..1
          TypeMeta
          Summarytrue
          6. Basic.implicitRules
          Definition

          A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content.

          ShortA set of rules under which this content was created
          Comments

          Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element.

          This element is labelled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation.

          Control0..1
          Typeuri
          Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          8. Basic.language
          Definition

          The base language in which the resource is written.

          ShortLanguage of the resource content
          Comments

          Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

          Control0..1
          BindingUnless not suitable, these codes SHALL be taken from Common Languages
          (extensible to http://hl7.org/fhir/ValueSet/languages|3.0.2)

          A human language.

          Additional BindingsPurpose
          All LanguagesMax Binding
          Typecode
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          10. Basic.text
          Definition

          A human-readable narrative that contains a summary of the resource, and may be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

          ShortText summary of the resource, for human interpretation
          Comments

          Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded in formation is added later.

          Control0..1
          This element is affected by the following invariants: dom-1
          TypeNarrative
          Alternate Namesnarrative, html, xhtml, display
          12. Basic.contained
          Definition

          These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

          ShortContained, inline Resources
          Comments

          This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again.

          Control0..*
          TypeResource
          Alternate Namesinline resources, anonymous resources, contained resources
          14. Basic.extension
          Definition

          An Extension

          ShortExtension
          Control0..*
          TypeExtension
          SlicingThis element introduces a set of slices on Basic.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ url
          • 16. Basic.extension:category
            Slice Namecategory
            Definition

            R4B: NutritionProduct.category (new:CodeableConcept)

            ShortR4B: A category or class of the nutrition product (halal, kosher, gluten free, vegan, etc) (new)
            Comments

            Element NutritionProduct.category is not mapped to FHIR STU3, since FHIR R4B NutritionProduct is not mapped. Element NutritionProduct.category has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

            Control0..*
            This element is affected by the following invariants: ele-1
            TypeExtension(R4B: A category or class of the nutrition product (halal, kosher, gluten free, vegan, etc) (new)) (Extension Type: CodeableConcept)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            18. Basic.extension:code
            Slice Namecode
            Definition

            R4B: NutritionProduct.code (new:CodeableConcept)

            ShortR4B: A code designating a specific type of nutritional product (new)
            Comments

            Element NutritionProduct.code is not mapped to FHIR STU3, since FHIR R4B NutritionProduct is not mapped. Element NutritionProduct.code has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

            Control0..1
            This element is affected by the following invariants: ele-1
            TypeExtension(R4B: A code designating a specific type of nutritional product (new)) (Extension Type: CodeableConcept)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            20. Basic.extension:manufacturer
            Slice Namemanufacturer
            Definition

            R4B: NutritionProduct.manufacturer (new:Reference(Organization))

            ShortR4B: Manufacturer, representative or officially responsible for the product (new)
            Comments

            Element NutritionProduct.manufacturer is not mapped to FHIR STU3, since FHIR R4B NutritionProduct is not mapped. Element NutritionProduct.manufacturer has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

            Control0..*
            This element is affected by the following invariants: ele-1
            TypeExtension(R4B: Manufacturer, representative or officially responsible for the product (new)) (Extension Type: Reference(Cross-version Profile for R4B.Organization for use in FHIR STU3, Organization))
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            22. Basic.extension:nutrient
            Slice Namenutrient
            Definition

            R4B: NutritionProduct.nutrient (new:BackboneElement)

            ShortR4B: The product's nutritional information expressed by the nutrients (new)
            Comments

            Element NutritionProduct.nutrient is not mapped to FHIR STU3, since FHIR R4B NutritionProduct is not mapped. Element NutritionProduct.nutrient has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Note: This is a business identifier, not a resource identifier (see discussion). It is best practice for the identifier to only appear on a single resource instance, however business practices may occasionally dictate that multiple resource instances with the same identifier can exist - possibly even with different resource types. For example, multiple Patient and a Person resource instance might share the same social insurance number.

            Control0..*
            This element is affected by the following invariants: ele-1
            TypeExtension(R4B: The product's nutritional information expressed by the nutrients (new)) (Complex Extension)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            24. Basic.extension:ingredient
            Slice Nameingredient
            Definition

            R4B: NutritionProduct.ingredient (new:BackboneElement)

            ShortR4B: Ingredients contained in this product (new)
            Comments

            Element NutritionProduct.ingredient is not mapped to FHIR STU3, since FHIR R4B NutritionProduct is not mapped. Element NutritionProduct.ingredient has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

            Control0..*
            This element is affected by the following invariants: ele-1
            TypeExtension(R4B: Ingredients contained in this product (new)) (Complex Extension)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            26. Basic.extension:knownAllergen
            Slice NameknownAllergen
            Definition

            R4B: NutritionProduct.knownAllergen (new:CodeableReference(Substance))

            ShortR4B: Known or suspected allergens that are a part of this product (new)
            Comments

            Element NutritionProduct.knownAllergen is not mapped to FHIR STU3, since FHIR R4B NutritionProduct is not mapped. Element NutritionProduct.knownAllergen has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

            Control0..*
            This element is affected by the following invariants: ele-1
            TypeExtension(R4B: Known or suspected allergens that are a part of this product (new)) (Complex Extension)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            28. Basic.extension:productCharacteristic
            Slice NameproductCharacteristic
            Definition

            R4B: NutritionProduct.productCharacteristic (new:BackboneElement)

            ShortR4B: Specifies descriptive properties of the nutrition product (new)
            Comments

            Element NutritionProduct.productCharacteristic is not mapped to FHIR STU3, since FHIR R4B NutritionProduct is not mapped. Element NutritionProduct.productCharacteristic has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

            Control0..*
            This element is affected by the following invariants: ele-1
            TypeExtension(R4B: Specifies descriptive properties of the nutrition product (new)) (Complex Extension)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            30. Basic.extension:instance
            Slice Nameinstance
            Definition

            R4B: NutritionProduct.instance (new:BackboneElement)

            ShortR4B: One or several physical instances or occurrences of the nutrition product (new)
            Comments

            Element NutritionProduct.instance is not mapped to FHIR STU3, since FHIR R4B NutritionProduct is not mapped. Element NutritionProduct.instance has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

            Control0..1
            This element is affected by the following invariants: ele-1
            TypeExtension(R4B: One or several physical instances or occurrences of the nutrition product (new)) (Complex Extension)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            32. Basic.extension:note
            Slice Namenote
            Definition

            R4B: NutritionProduct.note (new:Annotation)

            ShortR4B: Comments made about the product (new)
            Comments

            Element NutritionProduct.note is not mapped to FHIR STU3, since FHIR R4B NutritionProduct is not mapped. Element NutritionProduct.note has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

            Control0..*
            This element is affected by the following invariants: ele-1
            TypeExtension(R4B: Comments made about the product (new)) (Extension Type: Annotation)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            34. Basic.modifierExtension
            Definition

            An Extension

            ShortExtension
            Control0..*
            TypeExtension
            Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
            SlicingThis element introduces a set of slices on Basic.modifierExtension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • value @ url
            • 36. Basic.modifierExtension:status
              Slice Namestatus
              Definition

              R4B: NutritionProduct.status (new:code)

              ShortR4B: active | inactive | entered-in-error (new)
              Comments

              Element NutritionProduct.status is not mapped to FHIR STU3, since FHIR R4B NutritionProduct is not mapped. Element NutritionProduct.status has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Unknown does not represent "other" - one of the defined statuses must apply. Unknown is used when the authoring system is not sure what the current status is.

              Control1..1
              This element is affected by the following invariants: ele-1
              TypeExtension(R4B: active | inactive | entered-in-error (new)) (Extension Type: code)
              Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              38. Basic.identifier
              Definition

              Identifier assigned to the resource for business purposes, outside the context of FHIR.

              ShortBusiness identifier
              NoteThis is a business identifier, not a resource identifier (see discussion)
              Control0..*
              TypeIdentifier
              Summarytrue
              40. Basic.code
              Definition

              Identifies the 'type' of resource - equivalent to the resource name for other resources.

              ShortKind of Resource
              Comments

              Because resource references will only be able to indicate 'Basic', the type of reference will need to be specified in a Profile identified as part of the resource. Refer to the resource notes section for information on appropriate terminologies for this code.

              This element is labeled as a modifier because the it defines the meaning of the resource and cannot be ignored.

              Control1..1
              BindingFor example codes, see Basic Resource Types
              (example to http://hl7.org/fhir/ValueSet/basic-resource-type|3.0.2)

              Codes for identifying types of resources not yet defined by FHIR

              TypeCodeableConcept
              Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
              Summarytrue
              Requirements

              Must be able to distinguish different types of Basic resources.

              42. Basic.subject
              Definition

              Identifies the patient, practitioner, device or any other resource that is the "focus" of this resource.

              ShortIdentifies the focus of this resource
              Comments

              Optional as not all potential resources will have subjects. Resources associated with multiple subjects can handle this via extension.

              Control0..1
              TypeReference(Resource)
              Summarytrue
              Requirements

              Needed for partitioning the resource by Patient.

              44. Basic.created
              Definition

              Identifies when the resource was first created.

              ShortWhen created
              Control0..1
              Typedate
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Requirements

              Allows ordering resource instances by time.

              46. Basic.author
              Definition

              Indicates who was responsible for creating the resource instance.

              ShortWho created
              Control0..1
              TypeReference(Practitioner, Patient, RelatedPerson)
              Summarytrue
              Requirements

              Needed for partitioning the resource.