Profile_R4B_EvidenceReport_R3 - Definitions - Extensions for Using Data Elements from FHIR R4B in FHIR STU3 v0.1.0

Extensions for Using Data Elements from FHIR R4B in FHIR STU3 - Downloaded Version null See the Directory of published versions

Resource Profile: Profile_R4B_EvidenceReport_R3 - Detailed Descriptions

Page standards status: Trial-use

Maturity Level: 0

Definitions for the profile-EvidenceReport resource profile.

Key Elements Table
Differential Elements Table
Snapshot Elements Table

Guidance on how to interpret the contents of this table can be foundhere

0. Basic
Definition	Basic is used for handling concepts not yet defined in FHIR, narrative-only resources that don't map to an existing resource, and custom resources not appropriate for inclusion in the FHIR specification.
Short	Resource for non-supported content
Control	0..*
Alternate Names	Z-resource, Extension-resource, Custom-resource
Invariants	dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (`contained.contained.empty()`) dom-1: If the resource is contained in another resource, it SHALL NOT contain any narrative (`contained.text.empty()`) dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (`contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()`) dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource (`contained.where(('#'+id in %resource.descendants().reference).not()).empty()`) dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty()) dom-1: If the resource is contained in another resource, it SHALL NOT contain any narrative (contained.text.empty()) dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()) dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource (contained.where(('#'+id in %resource.descendants().reference).not()).empty())
2. Basic.implicitRules
Definition	A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content.
Short	A set of rules under which this content was created
Comments	Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. This element is labelled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation.
Control	0..1
Type	uri
Is Modifier	true because No Modifier Reason provideed in previous versions of FHIR
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	true
4. Basic.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the resource. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	10..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Basic.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
6. Basic.extension:url
Slice Name	url
Definition	R4B: `EvidenceReport.url` (new:uri)
Short	R4B: Canonical identifier for this EvidenceReport, represented as a globally unique URI (new)
Comments	Element `EvidenceReport.url` is not mapped to FHIR STU3, since FHIR R4B `EvidenceReport` is not mapped. Element `EvidenceReport.url` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Can be a urn:uuid: or a urn:oid: but real http: addresses are preferred. Multiple instances may share the same URL if they have a distinct version.
Control	0..1 This element is affected by the following invariants: ele-1
Type	Extension(R4B: Canonical identifier for this EvidenceReport, represented as a globally unique URI (new)) (Extension Type: uri)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
8. Basic.extension:useContext
Slice Name	useContext
Definition	R4B: `EvidenceReport.useContext` (new:UsageContext)
Short	R4B: The context that the content is intended to support (new)
Comments	Element `EvidenceReport.useContext` is not mapped to FHIR STU3, since FHIR R4B `EvidenceReport` is not mapped. Element `EvidenceReport.useContext` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). When multiple useContexts are specified, there is no expectation that all or any of the contexts apply.
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(R4B: The context that the content is intended to support (new)) (Complex Extension)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
10. Basic.extension:relatedIdentifier
Slice Name	relatedIdentifier
Definition	R4B: `EvidenceReport.relatedIdentifier` (new:Identifier)
Short	R4B: Identifiers for articles that may relate to more than one evidence report (new)
Comments	Element `EvidenceReport.relatedIdentifier` is not mapped to FHIR STU3, since FHIR R4B `EvidenceReport` is not mapped. Element `EvidenceReport.relatedIdentifier` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). May include trial registry identifiers, e.g. NCT04372602 from clinicaltrials.gov. This identifier can be valid for multiple EvidenceReport resources.
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(R4B: Identifiers for articles that may relate to more than one evidence report (new)) (Extension Type: Identifier)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
12. Basic.extension:citeAs
Slice Name	citeAs
Definition	R4B: `EvidenceReport.citeAs[x]` (new:markdown, Reference(Citation))
Short	R4B: Citation for this report (new)
Comments	Element `EvidenceReport.citeAs[x]` is not mapped to FHIR STU3, since FHIR R4B `EvidenceReport` is not mapped. Element `EvidenceReport.citeAs[x]` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). used for reports for which external citation is expected, such as use in support of scholarly publications.
Control	0..1 This element is affected by the following invariants: ele-1
Type	Extension(R4B: Citation for this report (new)) (Extension Type: Choice of: Reference(Cross-version Profile for R4B.Citation for use in FHIR STU3, Basic), markdown)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
14. Basic.extension:type
Slice Name	type
Definition	R4B: `EvidenceReport.type` (new:CodeableConcept)
Short	R4B: Kind of report (new)
Comments	Element `EvidenceReport.type` is not mapped to FHIR STU3, since FHIR R4B `EvidenceReport` is not mapped. Element `EvidenceReport.type` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1 This element is affected by the following invariants: ele-1
Type	Extension(R4B: Kind of report (new)) (Extension Type: CodeableConcept)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
16. Basic.extension:note
Slice Name	note
Definition	R4B: `EvidenceReport.note` (new:Annotation)
Short	R4B: Used for footnotes and annotations (new)
Comments	Element `EvidenceReport.note` is not mapped to FHIR STU3, since FHIR R4B `EvidenceReport` is not mapped. Element `EvidenceReport.note` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(R4B: Used for footnotes and annotations (new)) (Extension Type: Annotation)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
18. Basic.extension:relatedArtifact
Slice Name	relatedArtifact
Definition	R4B: `EvidenceReport.relatedArtifact` (new:RelatedArtifact)
Short	R4B: Link, description or reference to artifact associated with the report (new)
Comments	Element `EvidenceReport.relatedArtifact` is not mapped to FHIR STU3, since FHIR R4B `EvidenceReport` is not mapped. Element `EvidenceReport.relatedArtifact` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(R4B: Link, description or reference to artifact associated with the report (new)) (Complex Extension)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
20. Basic.extension:subject
Slice Name	subject
Definition	R4B: `EvidenceReport.subject` (new:BackboneElement)
Short	R4B: Focus of the report (new)
Comments	Element `EvidenceReport.subject` is not mapped to FHIR STU3, since FHIR R4B `EvidenceReport` is not mapped. Element `EvidenceReport.subject` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). While the source element matches Basic element path `(`), the definitions are not compatible (source: `BackboneElement`:1..1 -> basic: `Reference(http://hl7.org/fhir/StructureDefinition/Resource)`:0..1). May be used as an expression for search queries and search results
Control	1..1 This element is affected by the following invariants: ele-1
Type	Extension(R4B: Focus of the report (new)) (Complex Extension)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
22. Basic.extension:publisher
Slice Name	publisher
Definition	R4B: `EvidenceReport.publisher` (new:string)
Short	R4B: Name of the publisher (organization or individual) (new)
Comments	Element `EvidenceReport.publisher` is not mapped to FHIR STU3, since FHIR R4B `EvidenceReport` is not mapped. Element `EvidenceReport.publisher` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Usually an organization but may be an individual. The publisher (or steward) of the evidence report is the organization or individual primarily responsible for the maintenance and upkeep of the evidence report. This is not necessarily the same individual or organization that developed and initially authored the content. The publisher is the primary point of contact for questions or issues with the evidence report. This item SHOULD be populated unless the information is available from context.
Control	0..1 This element is affected by the following invariants: ele-1
Type	Extension(R4B: Name of the publisher (organization or individual) (new)) (Extension Type: string)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
24. Basic.extension:contact
Slice Name	contact
Definition	R4B: `EvidenceReport.contact` (new:ContactDetail)
Short	R4B: Contact details for the publisher (new)
Comments	Element `EvidenceReport.contact` is not mapped to FHIR STU3, since FHIR R4B `EvidenceReport` is not mapped. Element `EvidenceReport.contact` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Extensions to ContactDetail include: contactReference, contactAddress, and contributionTime (Details at: http://build.fhir.org/clinicalreasoning-module.html).
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(R4B: Contact details for the publisher (new)) (Complex Extension)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
26. Basic.extension:author
Slice Name	author
Definition	R4B: `EvidenceReport.author` (new:ContactDetail)
Short	R4B: Who authored the content (new)
Comments	Element `EvidenceReport.author` is not mapped to FHIR STU3, since FHIR R4B `EvidenceReport` is not mapped. Element `EvidenceReport.author` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). While the source element matches Basic element path `(`), the definitions are not compatible (source: `ContactDetail`:0..* -> basic: `Reference(http://hl7.org/fhir/StructureDefinition/Practitioner,http://hl7.org/fhir/StructureDefinition/Patient,http://hl7.org/fhir/StructureDefinition/RelatedPerson)`:0..1). Extensions to ContactDetail include: contactReference, contactAddress, and contributionTime (Details at: http://build.fhir.org/clinicalreasoning-module.html).
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(R4B: Who authored the content (new)) (Complex Extension)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
28. Basic.extension:editor
Slice Name	editor
Definition	R4B: `EvidenceReport.editor` (new:ContactDetail)
Short	R4B: Who edited the content (new)
Comments	Element `EvidenceReport.editor` is not mapped to FHIR STU3, since FHIR R4B `EvidenceReport` is not mapped. Element `EvidenceReport.editor` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Extensions to ContactDetail include: contactReference, contactAddress, and contributionTime (Details at: http://build.fhir.org/clinicalreasoning-module.html).
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(R4B: Who edited the content (new)) (Complex Extension)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
30. Basic.extension:reviewer
Slice Name	reviewer
Definition	R4B: `EvidenceReport.reviewer` (new:ContactDetail)
Short	R4B: Who reviewed the content (new)
Comments	Element `EvidenceReport.reviewer` is not mapped to FHIR STU3, since FHIR R4B `EvidenceReport` is not mapped. Element `EvidenceReport.reviewer` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Extensions to ContactDetail include: contactReference, contactAddress, and contributionTime (Details at: http://build.fhir.org/clinicalreasoning-module.html).
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(R4B: Who reviewed the content (new)) (Complex Extension)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
32. Basic.extension:endorser
Slice Name	endorser
Definition	R4B: `EvidenceReport.endorser` (new:ContactDetail)
Short	R4B: Who endorsed the content (new)
Comments	Element `EvidenceReport.endorser` is not mapped to FHIR STU3, since FHIR R4B `EvidenceReport` is not mapped. Element `EvidenceReport.endorser` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Extensions to ContactDetail include: contactReference, contactAddress, and contributionTime (Details at: http://build.fhir.org/clinicalreasoning-module.html).
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(R4B: Who endorsed the content (new)) (Complex Extension)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
34. Basic.extension:relatesTo
Slice Name	relatesTo
Definition	R4B: `EvidenceReport.relatesTo` (new:BackboneElement)
Short	R4B: Relationships to other compositions/documents (new)
Comments	Element `EvidenceReport.relatesTo` is not mapped to FHIR STU3, since FHIR R4B `EvidenceReport` is not mapped. Element `EvidenceReport.relatesTo` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). A document is a version specific composition.
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(R4B: Relationships to other compositions/documents (new)) (Complex Extension)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
36. Basic.extension:section
Slice Name	section
Definition	R4B: `EvidenceReport.section` (new:BackboneElement)
Short	R4B: Composition is broken into sections (new)
Comments	Element `EvidenceReport.section` is not mapped to FHIR STU3, since FHIR R4B `EvidenceReport` is not mapped. Element `EvidenceReport.section` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(R4B: Composition is broken into sections (new)) (Complex Extension)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
38. Basic.extension:section
Slice Name	section
Definition	R4B: `EvidenceReport.section.section` (new:EvidenceReport.section)
Short	R4B: Nested Section (new)
Comments	Element `EvidenceReport.section.section` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.section` is not mapped to FHIR STU3, since FHIR R4B `EvidenceReport` is not mapped. Element `EvidenceReport.section.section` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Nested sections are primarily used to help human readers navigate to particular portions of the document.
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(R4B: Composition is broken into sections (new)) (Complex Extension)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
40. Basic.modifierExtension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the resource, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.
Short	ExtensionExtensions that cannot be ignored
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	true because No Modifier Reason provideed in previous versions of FHIR
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Basic.modifierExtension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
42. Basic.modifierExtension:status
Slice Name	status
Definition	R4B: `EvidenceReport.status` (new:code)
Short	R4B: draft \| active \| retired \| unknown (new)
Comments	Element `EvidenceReport.status` is not mapped to FHIR STU3, since FHIR R4B `EvidenceReport` is not mapped. Element `EvidenceReport.status` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Allows filtering of summaries that are appropriate for use versus not.
Control	1..1 This element is affected by the following invariants: ele-1
Type	Extension(R4B: draft \| active \| retired \| unknown (new)) (Extension Type: code)
Is Modifier	true because No Modifier Reason provideed in previous versions of FHIR
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
44. Basic.code
Definition	Identifies the 'type' of resource - equivalent to the resource name for other resources.
Short	Kind of Resource
Comments	Because resource references will only be able to indicate 'Basic', the type of reference will need to be specified in a Profile identified as part of the resource. Refer to the resource notes section for information on appropriate terminologies for this code. This element is labeled as a modifier because the it defines the meaning of the resource and cannot be ignored.
Control	1..1
Binding	For example codes, see Basic Resource Typeshttp://hl7.org/fhir/ValueSet/basic-resource-type\|3.0.2 (example to `http://hl7.org/fhir/ValueSet/basic-resource-type\|3.0.2`) Codes for identifying types of resources not yet defined by FHIR
Type	CodeableConcept
Is Modifier	true because No Modifier Reason provideed in previous versions of FHIR
Summary	true
Requirements	Must be able to distinguish different types of Basic resources.

Guidance on how to interpret the contents of this table can be foundhere

0. Basic
2. Basic.extension
Control	1..*
Slicing	This element introduces a set of slices on `Basic.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
4. Basic.extension:url
Slice Name	url
Definition	R4B: `EvidenceReport.url` (new:uri)
Short	R4B: Canonical identifier for this EvidenceReport, represented as a globally unique URI (new)
Comments	Element `EvidenceReport.url` is not mapped to FHIR STU3, since FHIR R4B `EvidenceReport` is not mapped. Element `EvidenceReport.url` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Can be a urn:uuid: or a urn:oid: but real http: addresses are preferred. Multiple instances may share the same URL if they have a distinct version.
Control	0..1
Type	Extension(R4B: Canonical identifier for this EvidenceReport, represented as a globally unique URI (new)) (Extension Type: uri)
6. Basic.extension:useContext
Slice Name	useContext
Definition	R4B: `EvidenceReport.useContext` (new:UsageContext)
Short	R4B: The context that the content is intended to support (new)
Comments	Element `EvidenceReport.useContext` is not mapped to FHIR STU3, since FHIR R4B `EvidenceReport` is not mapped. Element `EvidenceReport.useContext` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). When multiple useContexts are specified, there is no expectation that all or any of the contexts apply.
Control	0..*
Type	Extension(R4B: The context that the content is intended to support (new)) (Complex Extension)
8. Basic.extension:relatedIdentifier
Slice Name	relatedIdentifier
Definition	R4B: `EvidenceReport.relatedIdentifier` (new:Identifier)
Short	R4B: Identifiers for articles that may relate to more than one evidence report (new)
Comments	Element `EvidenceReport.relatedIdentifier` is not mapped to FHIR STU3, since FHIR R4B `EvidenceReport` is not mapped. Element `EvidenceReport.relatedIdentifier` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). May include trial registry identifiers, e.g. NCT04372602 from clinicaltrials.gov. This identifier can be valid for multiple EvidenceReport resources.
Control	0..*
Type	Extension(R4B: Identifiers for articles that may relate to more than one evidence report (new)) (Extension Type: Identifier)
10. Basic.extension:citeAs
Slice Name	citeAs
Definition	R4B: `EvidenceReport.citeAs[x]` (new:markdown, Reference(Citation))
Short	R4B: Citation for this report (new)
Comments	Element `EvidenceReport.citeAs[x]` is not mapped to FHIR STU3, since FHIR R4B `EvidenceReport` is not mapped. Element `EvidenceReport.citeAs[x]` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). used for reports for which external citation is expected, such as use in support of scholarly publications.
Control	0..1
Type	Extension(R4B: Citation for this report (new)) (Extension Type: Choice of: Reference(Cross-version Profile for R4B.Citation for use in FHIR STU3, Basic), markdown)
12. Basic.extension:type
Slice Name	type
Definition	R4B: `EvidenceReport.type` (new:CodeableConcept)
Short	R4B: Kind of report (new)
Comments	Element `EvidenceReport.type` is not mapped to FHIR STU3, since FHIR R4B `EvidenceReport` is not mapped. Element `EvidenceReport.type` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension(R4B: Kind of report (new)) (Extension Type: CodeableConcept)
14. Basic.extension:note
Slice Name	note
Definition	R4B: `EvidenceReport.note` (new:Annotation)
Short	R4B: Used for footnotes and annotations (new)
Comments	Element `EvidenceReport.note` is not mapped to FHIR STU3, since FHIR R4B `EvidenceReport` is not mapped. Element `EvidenceReport.note` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension(R4B: Used for footnotes and annotations (new)) (Extension Type: Annotation)
16. Basic.extension:relatedArtifact
Slice Name	relatedArtifact
Definition	R4B: `EvidenceReport.relatedArtifact` (new:RelatedArtifact)
Short	R4B: Link, description or reference to artifact associated with the report (new)
Comments	Element `EvidenceReport.relatedArtifact` is not mapped to FHIR STU3, since FHIR R4B `EvidenceReport` is not mapped. Element `EvidenceReport.relatedArtifact` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension(R4B: Link, description or reference to artifact associated with the report (new)) (Complex Extension)
18. Basic.extension:subject
Slice Name	subject
Definition	R4B: `EvidenceReport.subject` (new:BackboneElement)
Short	R4B: Focus of the report (new)
Comments	Element `EvidenceReport.subject` is not mapped to FHIR STU3, since FHIR R4B `EvidenceReport` is not mapped. Element `EvidenceReport.subject` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). While the source element matches Basic element path `(`), the definitions are not compatible (source: `BackboneElement`:1..1 -> basic: `Reference(http://hl7.org/fhir/StructureDefinition/Resource)`:0..1). May be used as an expression for search queries and search results
Control	1..1
Type	Extension(R4B: Focus of the report (new)) (Complex Extension)
20. Basic.extension:publisher
Slice Name	publisher
Definition	R4B: `EvidenceReport.publisher` (new:string)
Short	R4B: Name of the publisher (organization or individual) (new)
Comments	Element `EvidenceReport.publisher` is not mapped to FHIR STU3, since FHIR R4B `EvidenceReport` is not mapped. Element `EvidenceReport.publisher` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Usually an organization but may be an individual. The publisher (or steward) of the evidence report is the organization or individual primarily responsible for the maintenance and upkeep of the evidence report. This is not necessarily the same individual or organization that developed and initially authored the content. The publisher is the primary point of contact for questions or issues with the evidence report. This item SHOULD be populated unless the information is available from context.
Control	0..1
Type	Extension(R4B: Name of the publisher (organization or individual) (new)) (Extension Type: string)
22. Basic.extension:contact
Slice Name	contact
Definition	R4B: `EvidenceReport.contact` (new:ContactDetail)
Short	R4B: Contact details for the publisher (new)
Comments	Element `EvidenceReport.contact` is not mapped to FHIR STU3, since FHIR R4B `EvidenceReport` is not mapped. Element `EvidenceReport.contact` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Extensions to ContactDetail include: contactReference, contactAddress, and contributionTime (Details at: http://build.fhir.org/clinicalreasoning-module.html).
Control	0..*
Type	Extension(R4B: Contact details for the publisher (new)) (Complex Extension)
24. Basic.extension:author
Slice Name	author
Definition	R4B: `EvidenceReport.author` (new:ContactDetail)
Short	R4B: Who authored the content (new)
Comments	Element `EvidenceReport.author` is not mapped to FHIR STU3, since FHIR R4B `EvidenceReport` is not mapped. Element `EvidenceReport.author` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). While the source element matches Basic element path `(`), the definitions are not compatible (source: `ContactDetail`:0..* -> basic: `Reference(http://hl7.org/fhir/StructureDefinition/Practitioner,http://hl7.org/fhir/StructureDefinition/Patient,http://hl7.org/fhir/StructureDefinition/RelatedPerson)`:0..1). Extensions to ContactDetail include: contactReference, contactAddress, and contributionTime (Details at: http://build.fhir.org/clinicalreasoning-module.html).
Control	0..*
Type	Extension(R4B: Who authored the content (new)) (Complex Extension)
26. Basic.extension:editor
Slice Name	editor
Definition	R4B: `EvidenceReport.editor` (new:ContactDetail)
Short	R4B: Who edited the content (new)
Comments	Element `EvidenceReport.editor` is not mapped to FHIR STU3, since FHIR R4B `EvidenceReport` is not mapped. Element `EvidenceReport.editor` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Extensions to ContactDetail include: contactReference, contactAddress, and contributionTime (Details at: http://build.fhir.org/clinicalreasoning-module.html).
Control	0..*
Type	Extension(R4B: Who edited the content (new)) (Complex Extension)
28. Basic.extension:reviewer
Slice Name	reviewer
Definition	R4B: `EvidenceReport.reviewer` (new:ContactDetail)
Short	R4B: Who reviewed the content (new)
Comments	Element `EvidenceReport.reviewer` is not mapped to FHIR STU3, since FHIR R4B `EvidenceReport` is not mapped. Element `EvidenceReport.reviewer` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Extensions to ContactDetail include: contactReference, contactAddress, and contributionTime (Details at: http://build.fhir.org/clinicalreasoning-module.html).
Control	0..*
Type	Extension(R4B: Who reviewed the content (new)) (Complex Extension)
30. Basic.extension:endorser
Slice Name	endorser
Definition	R4B: `EvidenceReport.endorser` (new:ContactDetail)
Short	R4B: Who endorsed the content (new)
Comments	Element `EvidenceReport.endorser` is not mapped to FHIR STU3, since FHIR R4B `EvidenceReport` is not mapped. Element `EvidenceReport.endorser` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Extensions to ContactDetail include: contactReference, contactAddress, and contributionTime (Details at: http://build.fhir.org/clinicalreasoning-module.html).
Control	0..*
Type	Extension(R4B: Who endorsed the content (new)) (Complex Extension)
32. Basic.extension:relatesTo
Slice Name	relatesTo
Definition	R4B: `EvidenceReport.relatesTo` (new:BackboneElement)
Short	R4B: Relationships to other compositions/documents (new)
Comments	Element `EvidenceReport.relatesTo` is not mapped to FHIR STU3, since FHIR R4B `EvidenceReport` is not mapped. Element `EvidenceReport.relatesTo` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). A document is a version specific composition.
Control	0..*
Type	Extension(R4B: Relationships to other compositions/documents (new)) (Complex Extension)
34. Basic.extension:section
Slice Name	section
Definition	R4B: `EvidenceReport.section` (new:BackboneElement)
Short	R4B: Composition is broken into sections (new)
Comments	Element `EvidenceReport.section` is not mapped to FHIR STU3, since FHIR R4B `EvidenceReport` is not mapped. Element `EvidenceReport.section` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension(R4B: Composition is broken into sections (new)) (Complex Extension)
36. Basic.extension:section
Slice Name	section
Definition	R4B: `EvidenceReport.section.section` (new:EvidenceReport.section)
Short	R4B: Nested Section (new)
Comments	Element `EvidenceReport.section.section` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.section` is not mapped to FHIR STU3, since FHIR R4B `EvidenceReport` is not mapped. Element `EvidenceReport.section.section` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Nested sections are primarily used to help human readers navigate to particular portions of the document.
Control	0..*
Type	Extension(R4B: Composition is broken into sections (new)) (Complex Extension)
38. Basic.modifierExtension
Control	0..*
Slicing	This element introduces a set of slices on `Basic.modifierExtension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
40. Basic.modifierExtension:status
Slice Name	status
Definition	R4B: `EvidenceReport.status` (new:code)
Short	R4B: draft \| active \| retired \| unknown (new)
Comments	Element `EvidenceReport.status` is not mapped to FHIR STU3, since FHIR R4B `EvidenceReport` is not mapped. Element `EvidenceReport.status` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Allows filtering of summaries that are appropriate for use versus not.
Control	1..1
Type	Extension(R4B: draft \| active \| retired \| unknown (new)) (Extension Type: code)

Guidance on how to interpret the contents of this table can be foundhere

0. Basic

Definition

Basic is used for handling concepts not yet defined in FHIR, narrative-only resources that don't map to an existing resource, and custom resources not appropriate for inclusion in the FHIR specification.

Short Resource for non-supported content

Control 0..*

Alternate Names Z-resource, Extension-resource, Custom-resource

Invariants dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-1: If the resource is contained in another resource, it SHALL NOT contain any narrative (contained.text.empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource (contained.where(('#'+id in %resource.descendants().reference).not()).empty())

2. Basic.id

Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

Short Logical id of this artifact

Comments

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

Control 0..1

Type

Primitive Value This primitive element may be present, or absent, or replaced by an extension

Summary true

4. Basic.meta

Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content may not always be associated with version changes to the resource.

Short Metadata about the resource

Control 0..1

Type

Meta

Summary true

6. Basic.implicitRules

Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content.

Short A set of rules under which this content was created

Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element.

This element is labelled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation.

Control 0..1

Type

uri

Is Modifier true because No Modifier Reason provideed in previous versions of FHIR

Primitive Value This primitive element may be present, or absent, or replaced by an extension

Summary true

8. Basic.language

Definition

The base language in which the resource is written.

Short Language of the resource content

Comments

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

Control 0..1

Binding

Unless not suitable, these codes SHALL be taken from Common Languages
(extensible to http://hl7.org/fhir/ValueSet/languages|3.0.2)

A human language.

Additional Bindings

Purpose

Primitive Value This primitive element may be present, or absent, or replaced by an extension

10. Basic.text

Definition

A human-readable narrative that contains a summary of the resource, and may be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

Short Text summary of the resource, for human interpretation

Comments

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded in formation is added later.

Control 0..1
This element is affected by the following invariants: dom-1

Type

Narrative

Alternate Names narrative, html, xhtml, display

12. Basic.contained

Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

Short Contained, inline Resources

Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again.

Control 0..*

Type

Resource

Alternate Names inline resources, anonymous resources, contained resources

14. Basic.extension

Definition

An Extension

Short Extension

Control 1..*

Type

Extension

Slicing

This element introduces a set of slices on Basic.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:

value @ url

16. Basic.extension:url

Slice Name url

Definition

R4B: EvidenceReport.url (new:uri)

Short R4B: Canonical identifier for this EvidenceReport, represented as a globally unique URI (new)

Comments

Element EvidenceReport.url is not mapped to FHIR STU3, since FHIR R4B EvidenceReport is not mapped. Element EvidenceReport.url has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Can be a urn:uuid: or a urn:oid: but real http: addresses are preferred. Multiple instances may share the same URL if they have a distinct version.

Control 0..1
This element is affected by the following invariants: ele-1

Type Extension(R4B: Canonical identifier for this EvidenceReport, represented as a globally unique URI (new)) (Extension Type: uri)

Is Modifier false

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())

18. Basic.extension:useContext

Slice Name useContext

Definition

R4B: EvidenceReport.useContext (new:UsageContext)

Short R4B: The context that the content is intended to support (new)

Comments

Element EvidenceReport.useContext is not mapped to FHIR STU3, since FHIR R4B EvidenceReport is not mapped. Element EvidenceReport.useContext has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). When multiple useContexts are specified, there is no expectation that all or any of the contexts apply.

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(R4B: The context that the content is intended to support (new)) (Complex Extension)

Is Modifier false

20. Basic.extension:relatedIdentifier

Slice Name relatedIdentifier

Definition

R4B: EvidenceReport.relatedIdentifier (new:Identifier)

Short R4B: Identifiers for articles that may relate to more than one evidence report (new)

Comments

Element EvidenceReport.relatedIdentifier is not mapped to FHIR STU3, since FHIR R4B EvidenceReport is not mapped. Element EvidenceReport.relatedIdentifier has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). May include trial registry identifiers, e.g. NCT04372602 from clinicaltrials.gov. This identifier can be valid for multiple EvidenceReport resources.

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(R4B: Identifiers for articles that may relate to more than one evidence report (new)) (Extension Type: Identifier)

Is Modifier false

22. Basic.extension:citeAs

Slice Name citeAs

Definition

R4B: EvidenceReport.citeAs[x] (new:markdown, Reference(Citation))

Short R4B: Citation for this report (new)

Comments

Element EvidenceReport.citeAs[x] is not mapped to FHIR STU3, since FHIR R4B EvidenceReport is not mapped. Element EvidenceReport.citeAs[x] has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). used for reports for which external citation is expected, such as use in support of scholarly publications.

Control 0..1
This element is affected by the following invariants: ele-1

Type Extension(R4B: Citation for this report (new)) (Extension Type: Choice of: Reference(Cross-version Profile for R4B.Citation for use in FHIR STU3, Basic), markdown)

Is Modifier false

24. Basic.extension:type

Slice Name type

Definition

R4B: EvidenceReport.type (new:CodeableConcept)

Short R4B: Kind of report (new)

Comments

Element EvidenceReport.type is not mapped to FHIR STU3, since FHIR R4B EvidenceReport is not mapped. Element EvidenceReport.type has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Control 0..1
This element is affected by the following invariants: ele-1

Type Extension(R4B: Kind of report (new)) (Extension Type: CodeableConcept)

Is Modifier false

26. Basic.extension:note

Slice Name note

Definition

R4B: EvidenceReport.note (new:Annotation)

Short R4B: Used for footnotes and annotations (new)

Comments

Element EvidenceReport.note is not mapped to FHIR STU3, since FHIR R4B EvidenceReport is not mapped. Element EvidenceReport.note has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(R4B: Used for footnotes and annotations (new)) (Extension Type: Annotation)

Is Modifier false

28. Basic.extension:relatedArtifact

Slice Name relatedArtifact

Definition

R4B: EvidenceReport.relatedArtifact (new:RelatedArtifact)

Short R4B: Link, description or reference to artifact associated with the report (new)

Comments

Element EvidenceReport.relatedArtifact is not mapped to FHIR STU3, since FHIR R4B EvidenceReport is not mapped. Element EvidenceReport.relatedArtifact has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(R4B: Link, description or reference to artifact associated with the report (new)) (Complex Extension)

Is Modifier false

30. Basic.extension:subject

Slice Name subject

Definition

R4B: EvidenceReport.subject (new:BackboneElement)

Short R4B: Focus of the report (new)

Comments

Element EvidenceReport.subject is not mapped to FHIR STU3, since FHIR R4B EvidenceReport is not mapped. Element EvidenceReport.subject has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). While the source element matches Basic element path (), the definitions are not compatible (source: BackboneElement:1..1 -> basic: Reference(http://hl7.org/fhir/StructureDefinition/Resource):0..1). May be used as an expression for search queries and search results

Control 1..1
This element is affected by the following invariants: ele-1

Type Extension(R4B: Focus of the report (new)) (Complex Extension)

Is Modifier false

32. Basic.extension:publisher

Slice Name publisher

Definition

R4B: EvidenceReport.publisher (new:string)

Short R4B: Name of the publisher (organization or individual) (new)

Comments

Element EvidenceReport.publisher is not mapped to FHIR STU3, since FHIR R4B EvidenceReport is not mapped. Element EvidenceReport.publisher has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Usually an organization but may be an individual. The publisher (or steward) of the evidence report is the organization or individual primarily responsible for the maintenance and upkeep of the evidence report. This is not necessarily the same individual or organization that developed and initially authored the content. The publisher is the primary point of contact for questions or issues with the evidence report. This item SHOULD be populated unless the information is available from context.

Control 0..1
This element is affected by the following invariants: ele-1

Type Extension(R4B: Name of the publisher (organization or individual) (new)) (Extension Type: string)

Is Modifier false

34. Basic.extension:contact

Slice Name contact

Definition

R4B: EvidenceReport.contact (new:ContactDetail)

Short R4B: Contact details for the publisher (new)

Comments

Element EvidenceReport.contact is not mapped to FHIR STU3, since FHIR R4B EvidenceReport is not mapped. Element EvidenceReport.contact has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Extensions to ContactDetail include: contactReference, contactAddress, and contributionTime (Details at: http://build.fhir.org/clinicalreasoning-module.html).

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(R4B: Contact details for the publisher (new)) (Complex Extension)

Is Modifier false

36. Basic.extension:author

Slice Name author

Definition

R4B: EvidenceReport.author (new:ContactDetail)

Short R4B: Who authored the content (new)

Comments

Element EvidenceReport.author is not mapped to FHIR STU3, since FHIR R4B EvidenceReport is not mapped. Element EvidenceReport.author has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). While the source element matches Basic element path (), the definitions are not compatible (source: ContactDetail:0..* -> basic: Reference(http://hl7.org/fhir/StructureDefinition/Practitioner,http://hl7.org/fhir/StructureDefinition/Patient,http://hl7.org/fhir/StructureDefinition/RelatedPerson):0..1). Extensions to ContactDetail include: contactReference, contactAddress, and contributionTime (Details at: http://build.fhir.org/clinicalreasoning-module.html).

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(R4B: Who authored the content (new)) (Complex Extension)

Is Modifier false

38. Basic.extension:editor

Slice Name editor

Definition

R4B: EvidenceReport.editor (new:ContactDetail)

Short R4B: Who edited the content (new)

Comments

Element EvidenceReport.editor is not mapped to FHIR STU3, since FHIR R4B EvidenceReport is not mapped. Element EvidenceReport.editor has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Extensions to ContactDetail include: contactReference, contactAddress, and contributionTime (Details at: http://build.fhir.org/clinicalreasoning-module.html).

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(R4B: Who edited the content (new)) (Complex Extension)

Is Modifier false

40. Basic.extension:reviewer

Slice Name reviewer

Definition

R4B: EvidenceReport.reviewer (new:ContactDetail)

Short R4B: Who reviewed the content (new)

Comments

Element EvidenceReport.reviewer is not mapped to FHIR STU3, since FHIR R4B EvidenceReport is not mapped. Element EvidenceReport.reviewer has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Extensions to ContactDetail include: contactReference, contactAddress, and contributionTime (Details at: http://build.fhir.org/clinicalreasoning-module.html).

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(R4B: Who reviewed the content (new)) (Complex Extension)

Is Modifier false

42. Basic.extension:endorser

Slice Name endorser

Definition

R4B: EvidenceReport.endorser (new:ContactDetail)

Short R4B: Who endorsed the content (new)

Comments

Element EvidenceReport.endorser is not mapped to FHIR STU3, since FHIR R4B EvidenceReport is not mapped. Element EvidenceReport.endorser has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Extensions to ContactDetail include: contactReference, contactAddress, and contributionTime (Details at: http://build.fhir.org/clinicalreasoning-module.html).

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(R4B: Who endorsed the content (new)) (Complex Extension)

Is Modifier false

44. Basic.extension:relatesTo

Slice Name relatesTo

Definition

R4B: EvidenceReport.relatesTo (new:BackboneElement)

Short R4B: Relationships to other compositions/documents (new)

Comments

Element EvidenceReport.relatesTo is not mapped to FHIR STU3, since FHIR R4B EvidenceReport is not mapped. Element EvidenceReport.relatesTo has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). A document is a version specific composition.

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(R4B: Relationships to other compositions/documents (new)) (Complex Extension)

Is Modifier false

46. Basic.extension:section

Slice Name section

Definition

R4B: EvidenceReport.section (new:BackboneElement)

Short R4B: Composition is broken into sections (new)

Comments

Element EvidenceReport.section is not mapped to FHIR STU3, since FHIR R4B EvidenceReport is not mapped. Element EvidenceReport.section has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(R4B: Composition is broken into sections (new)) (Complex Extension)

Is Modifier false

48. Basic.extension:section

Slice Name section

Definition

R4B: EvidenceReport.section.section (new:EvidenceReport.section)

Short R4B: Nested Section (new)

Comments

Element EvidenceReport.section.section is part of an existing definition because parent element EvidenceReport.section requires a cross-version extension. Element EvidenceReport.section.section is not mapped to FHIR STU3, since FHIR R4B EvidenceReport is not mapped. Element EvidenceReport.section.section has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Nested sections are primarily used to help human readers navigate to particular portions of the document.

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(R4B: Composition is broken into sections (new)) (Complex Extension)

Is Modifier false

50. Basic.modifierExtension

Definition

An Extension

Short Extension

Control 0..*

Type

Extension

Is Modifier true because No Modifier Reason provideed in previous versions of FHIR

Slicing

This element introduces a set of slices on Basic.modifierExtension. The slices areUnordered and Open, and can be differentiated using the following discriminators:

value @ url

52. Basic.modifierExtension:status

Slice Name status

Definition

R4B: EvidenceReport.status (new:code)

Short R4B: draft | active | retired | unknown (new)

Comments

Element EvidenceReport.status is not mapped to FHIR STU3, since FHIR R4B EvidenceReport is not mapped. Element EvidenceReport.status has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Allows filtering of summaries that are appropriate for use versus not.

Control 1..1
This element is affected by the following invariants: ele-1

Type Extension(R4B: draft | active | retired | unknown (new)) (Extension Type: code)

Is Modifier true because No Modifier Reason provideed in previous versions of FHIR

54. Basic.identifier

Definition

Identifier assigned to the resource for business purposes, outside the context of FHIR.

Short Business identifier

Note This is a business identifier, not a resource identifier (see discussion)

Control 0..*

Type

Identifier

Summary true

56. Basic.code

Definition

Identifies the 'type' of resource - equivalent to the resource name for other resources.

Short Kind of Resource

Comments

Because resource references will only be able to indicate 'Basic', the type of reference will need to be specified in a Profile identified as part of the resource. Refer to the resource notes section for information on appropriate terminologies for this code.

This element is labeled as a modifier because the it defines the meaning of the resource and cannot be ignored.

Control 1..1

Binding

For example codes, see Basic Resource Types
(example to http://hl7.org/fhir/ValueSet/basic-resource-type|3.0.2)

Codes for identifying types of resources not yet defined by FHIR

Type

CodeableConcept

Is Modifier true because No Modifier Reason provideed in previous versions of FHIR

Summary true

Requirements

Must be able to distinguish different types of Basic resources.

58. Basic.subject

Definition

Identifies the patient, practitioner, device or any other resource that is the "focus" of this resource.

Short Identifies the focus of this resource

Comments

Optional as not all potential resources will have subjects. Resources associated with multiple subjects can handle this via extension.

Control 0..1

Type Reference(Resource)

Summary true

Requirements

Needed for partitioning the resource by Patient.

60. Basic.created

Definition

Identifies when the resource was first created.

Short When created

Control 0..1

Type

date

Primitive Value This primitive element may be present, or absent, or replaced by an extension

Summary true

Requirements

Allows ordering resource instances by time.

62. Basic.author

Definition

Indicates who was responsible for creating the resource instance.

Short Who created

Control 0..1

Type Reference(Practitioner, Patient, RelatedPerson)

Summary true

Requirements

Needed for partitioning the resource.