Extensions for Using Data Elements from FHIR R4B in FHIR STU3
0.1.0 - STU International flag

Extensions for Using Data Elements from FHIR R4B in FHIR STU3 - Downloaded Version null See the Directory of published versions

Resource Profile: Profile_R4B_Citation_R3 - Detailed Descriptions

Page standards status: Trial-use Maturity Level: 0

Definitions for the profile-Citation resource profile.

Guidance on how to interpret the contents of this table can be foundhere

0. Basic
Definition

Basic is used for handling concepts not yet defined in FHIR, narrative-only resources that don't map to an existing resource, and custom resources not appropriate for inclusion in the FHIR specification.

ShortResource for non-supported content
Control0..*
Alternate NamesZ-resource, Extension-resource, Custom-resource
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-1: If the resource is contained in another resource, it SHALL NOT contain any narrative (contained.text.empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource (contained.where(('#'+id in %resource.descendants().reference).not()).empty())
dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-1: If the resource is contained in another resource, it SHALL NOT contain any narrative (contained.text.empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource (contained.where(('#'+id in %resource.descendants().reference).not()).empty())
2. Basic.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element.

This element is labelled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation.

Control0..1
Typeuri
Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
4. Basic.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the resource. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional Content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Alternate Namesextensions, user content
SlicingThis element introduces a set of slices on Basic.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 6. Basic.extension:url
    Slice Nameurl
    Definition

    R4B: Citation.url (new:uri)

    ShortR4B: Canonical identifier for this citation, represented as a globally unique URI (new)
    Comments

    Element Citation.url is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.url has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Can be a urn:uuid: or a urn:oid: but real http: addresses are preferred. Multiple instances may share the same URL if they have a distinct version.

    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(R4B: Canonical identifier for this citation, represented as a globally unique URI (new)) (Extension Type: uri)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    8. Basic.extension:version
    Slice Nameversion
    Definition

    R4B: Citation.version (new:string)

    ShortR4B: Business version of the citation (new)
    Comments

    Element Citation.version is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.version has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). There may be different citation instances that have the same identifier but different versions. The version can be appended to the url in a reference to allow a reference to a particular business version of the citation with the format [url]|[version].

    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(R4B: Business version of the citation (new)) (Extension Type: string)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    10. Basic.extension:name
    Slice Namename
    Definition

    R4B: Citation.name (new:string)

    ShortR4B: Name for this citation (computer friendly) (new)
    Comments

    Element Citation.name is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.name has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). The name is not expected to be globally unique. The name should be a simple alphanumeric type name to ensure that it is machine-processing friendly.

    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(R4B: Name for this citation (computer friendly) (new)) (Extension Type: string)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    12. Basic.extension:title
    Slice Nametitle
    Definition

    R4B: Citation.title (new:string)

    ShortR4B: Name for this citation (human friendly) (new)
    Comments

    Element Citation.title is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.title has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). This name does not need to be machine-processing friendly and may contain punctuation, white-space, etc.

    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(R4B: Name for this citation (human friendly) (new)) (Extension Type: string)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    14. Basic.extension:experimental
    Slice Nameexperimental
    Definition

    R4B: Citation.experimental (new:boolean)

    ShortR4B: For testing purposes, not real usage (new)
    Comments

    Element Citation.experimental is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.experimental has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Allows filtering of citations that are appropriate for use versus not.

    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(R4B: For testing purposes, not real usage (new)) (Extension Type: boolean)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    16. Basic.extension:date
    Slice Namedate
    Definition

    R4B: Citation.date (new:dateTime)

    ShortR4B: Date last changed (new)
    Comments

    Element Citation.date is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.date has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Note that this is not the same as the resource last-modified-date, since the resource may be a secondary representation of the citation. Additional specific dates may be added as extensions or be found by consulting Provenances associated with past versions of the resource.

    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(R4B: Date last changed (new)) (Extension Type: dateTime)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    18. Basic.extension:publisher
    Slice Namepublisher
    Definition

    R4B: Citation.publisher (new:string)

    ShortR4B: The publisher of the Citation, not the publisher of the article or artifact being cited (new)
    Comments

    Element Citation.publisher is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.publisher has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Usually an organization but may be an individual. The publisher (or steward) of the citation is the organization or individual primarily responsible for the maintenance and upkeep of the citation. This is not necessarily the same individual or organization that developed and initially authored the content. The publisher is the primary point of contact for questions or issues with the citation. This item SHOULD be populated unless the information is available from context.

    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(R4B: The publisher of the Citation, not the publisher of the article or artifact being cited (new)) (Extension Type: string)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    20. Basic.extension:contact
    Slice Namecontact
    Definition

    R4B: Citation.contact (new:ContactDetail)

    ShortR4B: Contact details for the publisher of the Citation Resource (new)
    Comments

    Element Citation.contact is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.contact has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). May be a web site, an email address, a telephone number, etc.

    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension(R4B: Contact details for the publisher of the Citation Resource (new)) (Complex Extension)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    22. Basic.extension:description
    Slice Namedescription
    Definition

    R4B: Citation.description (new:markdown)

    ShortR4B: Natural language description of the citation (new)
    Comments

    Element Citation.description is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.description has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). This description can be used to capture details such as why the citation was built, comments about misuse, instructions for clinical use and interpretation, literature references, examples from the paper world, etc. It is not a rendering of the citation as conveyed in the 'text' field of the resource itself. This item SHOULD be populated unless the information is available from context (e.g. the language of the citation is presumed to be the predominant language in the place the citation was created).

    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(R4B: Natural language description of the citation (new)) (Extension Type: markdown)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    24. Basic.extension:useContext
    Slice NameuseContext
    Definition

    R4B: Citation.useContext (new:UsageContext)

    ShortR4B: The context that the Citation Resource content is intended to support (new)
    Comments

    Element Citation.useContext is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.useContext has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). When multiple useContexts are specified, there is no expectation that all or any of the contexts apply.

    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension(R4B: The context that the Citation Resource content is intended to support (new)) (Complex Extension)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    26. Basic.extension:jurisdiction
    Slice Namejurisdiction
    Definition

    R4B: Citation.jurisdiction (new:CodeableConcept)

    ShortR4B: Intended jurisdiction for citation (if applicable) (new)
    Comments

    Element Citation.jurisdiction is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.jurisdiction has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). It may be possible for the citation to be used in jurisdictions other than those for which it was originally designed or intended.

    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension(R4B: Intended jurisdiction for citation (if applicable) (new)) (Extension Type: CodeableConcept)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    28. Basic.extension:purpose
    Slice Namepurpose
    Definition

    R4B: Citation.purpose (new:markdown)

    ShortR4B: Why this citation is defined (new)
    Comments

    Element Citation.purpose is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.purpose has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). This element does not describe the usage of the citation. Instead, it provides traceability of ''why'' the resource is either needed or ''why'' it is defined as it is. This may be used to point to source materials or specifications that drove the structure of this citation.

    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(R4B: Why this citation is defined (new)) (Extension Type: markdown)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    30. Basic.extension:copyright
    Slice Namecopyright
    Definition

    R4B: Citation.copyright (new:markdown)

    ShortR4B: Use and/or publishing restrictions for the Citation, not for the cited artifact (new)
    Comments

    Element Citation.copyright is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.copyright has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(R4B: Use and/or publishing restrictions for the Citation, not for the cited artifact (new)) (Extension Type: markdown)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    32. Basic.extension:approvalDate
    Slice NameapprovalDate
    Definition

    R4B: Citation.approvalDate (new:date)

    ShortR4B: When the citation was approved by publisher (new)
    Comments

    Element Citation.approvalDate is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.approvalDate has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). The 'date' element may be more recent than the approval date because of minor changes or editorial corrections.

    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(R4B: When the citation was approved by publisher (new)) (Extension Type: date)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    34. Basic.extension:lastReviewDate
    Slice NamelastReviewDate
    Definition

    R4B: Citation.lastReviewDate (new:date)

    ShortR4B: When the citation was last reviewed (new)
    Comments

    Element Citation.lastReviewDate is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.lastReviewDate has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). If specified, this date follows the original approval date.

    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(R4B: When the citation was last reviewed (new)) (Extension Type: date)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    36. Basic.extension:effectivePeriod
    Slice NameeffectivePeriod
    Definition

    R4B: Citation.effectivePeriod (new:Period)

    ShortR4B: When the citation is expected to be used (new)
    Comments

    Element Citation.effectivePeriod is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.effectivePeriod has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). The effective period for a citation determines when the content is applicable for usage and is independent of publication and review dates. For example, a measure intended to be used for the year 2016 might be published in 2015.

    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(R4B: When the citation is expected to be used (new)) (Extension Type: Period)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    38. Basic.extension:author
    Slice Nameauthor
    Definition

    R4B: Citation.author (new:ContactDetail)

    ShortR4B: Who authored the Citation (new)
    Comments

    Element Citation.author is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.author has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). While the source element matches Basic element path (), the definitions are not compatible (source: ContactDetail:0..* -> basic: Reference(http://hl7.org/fhir/StructureDefinition/Practitioner,http://hl7.org/fhir/StructureDefinition/Patient,http://hl7.org/fhir/StructureDefinition/RelatedPerson):0..1).

    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension(R4B: Who authored the Citation (new)) (Complex Extension)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    40. Basic.extension:editor
    Slice Nameeditor
    Definition

    R4B: Citation.editor (new:ContactDetail)

    ShortR4B: Who edited the Citation (new)
    Comments

    Element Citation.editor is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.editor has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension(R4B: Who edited the Citation (new)) (Complex Extension)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    42. Basic.extension:reviewer
    Slice Namereviewer
    Definition

    R4B: Citation.reviewer (new:ContactDetail)

    ShortR4B: Who reviewed the Citation (new)
    Comments

    Element Citation.reviewer is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.reviewer has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension(R4B: Who reviewed the Citation (new)) (Complex Extension)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    44. Basic.extension:endorser
    Slice Nameendorser
    Definition

    R4B: Citation.endorser (new:ContactDetail)

    ShortR4B: Who endorsed the Citation (new)
    Comments

    Element Citation.endorser is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.endorser has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension(R4B: Who endorsed the Citation (new)) (Complex Extension)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    46. Basic.extension:summary
    Slice Namesummary
    Definition

    R4B: Citation.summary (new:BackboneElement)

    ShortR4B: A human-readable display of the citation (new)
    Comments

    Element Citation.summary is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.summary has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension(R4B: A human-readable display of the citation (new)) (Complex Extension)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    48. Basic.extension:classification
    Slice Nameclassification
    Definition

    R4B: Citation.classification (new:BackboneElement)

    ShortR4B: The assignment to an organizing scheme (new)
    Comments

    Element Citation.classification is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.classification has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension(R4B: The assignment to an organizing scheme (new)) (Complex Extension)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    50. Basic.extension:note
    Slice Namenote
    Definition

    R4B: Citation.note (new:Annotation)

    ShortR4B: Used for general notes and annotations not coded elsewhere (new)
    Comments

    Element Citation.note is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.note has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension(R4B: Used for general notes and annotations not coded elsewhere (new)) (Extension Type: Annotation)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    52. Basic.extension:currentState
    Slice NamecurrentState
    Definition

    R4B: Citation.currentState (new:CodeableConcept)

    ShortR4B: The status of the citation (new)
    Comments

    Element Citation.currentState is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.currentState has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension(R4B: The status of the citation (new)) (Extension Type: CodeableConcept)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    54. Basic.extension:statusDate
    Slice NamestatusDate
    Definition

    R4B: Citation.statusDate (new:BackboneElement)

    ShortR4B: An effective date or period for a status of the citation (new)
    Comments

    Element Citation.statusDate is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.statusDate has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension(R4B: An effective date or period for a status of the citation (new)) (Complex Extension)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    56. Basic.extension:relatesTo
    Slice NamerelatesTo
    Definition

    R4B: Citation.relatesTo (new:BackboneElement)

    ShortR4B: Artifact related to the Citation Resource (new)
    Comments

    Element Citation.relatesTo is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.relatesTo has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension(R4B: Artifact related to the Citation Resource (new)) (Complex Extension)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    58. Basic.extension:citedArtifact
    Slice NamecitedArtifact
    Definition

    R4B: Citation.citedArtifact (new:BackboneElement)

    ShortR4B: The article or artifact being described (new)
    Comments

    Element Citation.citedArtifact is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.citedArtifact has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(R4B: The article or artifact being described (new)) (Complex Extension)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    60. Basic.modifierExtension
    Definition

    An Extension


    May be used to represent additional information that is not part of the basic definition of the resource, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    ShortExtensionExtensions that cannot be ignored
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
    Alternate Namesextensions, user content
    SlicingThis element introduces a set of slices on Basic.modifierExtension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • 62. Basic.modifierExtension:status
      Slice Namestatus
      Definition

      R4B: Citation.status (new:code)

      ShortR4B: draft | active | retired | unknown (new)
      Comments

      Element Citation.status is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.status has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Allows filtering of summarys s that are appropriate for use versus not.

      Control1..1
      This element is affected by the following invariants: ele-1
      TypeExtension(R4B: draft | active | retired | unknown (new)) (Extension Type: code)
      Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      64. Basic.code
      Definition

      Identifies the 'type' of resource - equivalent to the resource name for other resources.

      ShortKind of Resource
      Comments

      Because resource references will only be able to indicate 'Basic', the type of reference will need to be specified in a Profile identified as part of the resource. Refer to the resource notes section for information on appropriate terminologies for this code.

      This element is labeled as a modifier because the it defines the meaning of the resource and cannot be ignored.

      Control1..1
      BindingFor example codes, see Basic Resource Typeshttp://hl7.org/fhir/ValueSet/basic-resource-type|3.0.2
      (example to http://hl7.org/fhir/ValueSet/basic-resource-type|3.0.2)

      Codes for identifying types of resources not yet defined by FHIR

      TypeCodeableConcept
      Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
      Summarytrue
      Requirements

      Must be able to distinguish different types of Basic resources.

      Guidance on how to interpret the contents of this table can be foundhere

      0. Basic
      2. Basic.extension
      Control0..*
      SlicingThis element introduces a set of slices on Basic.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 4. Basic.extension:url
        Slice Nameurl
        Definition

        R4B: Citation.url (new:uri)

        ShortR4B: Canonical identifier for this citation, represented as a globally unique URI (new)
        Comments

        Element Citation.url is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.url has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Can be a urn:uuid: or a urn:oid: but real http: addresses are preferred. Multiple instances may share the same URL if they have a distinct version.

        Control0..1
        TypeExtension(R4B: Canonical identifier for this citation, represented as a globally unique URI (new)) (Extension Type: uri)
        6. Basic.extension:version
        Slice Nameversion
        Definition

        R4B: Citation.version (new:string)

        ShortR4B: Business version of the citation (new)
        Comments

        Element Citation.version is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.version has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). There may be different citation instances that have the same identifier but different versions. The version can be appended to the url in a reference to allow a reference to a particular business version of the citation with the format [url]|[version].

        Control0..1
        TypeExtension(R4B: Business version of the citation (new)) (Extension Type: string)
        8. Basic.extension:name
        Slice Namename
        Definition

        R4B: Citation.name (new:string)

        ShortR4B: Name for this citation (computer friendly) (new)
        Comments

        Element Citation.name is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.name has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). The name is not expected to be globally unique. The name should be a simple alphanumeric type name to ensure that it is machine-processing friendly.

        Control0..1
        TypeExtension(R4B: Name for this citation (computer friendly) (new)) (Extension Type: string)
        10. Basic.extension:title
        Slice Nametitle
        Definition

        R4B: Citation.title (new:string)

        ShortR4B: Name for this citation (human friendly) (new)
        Comments

        Element Citation.title is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.title has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). This name does not need to be machine-processing friendly and may contain punctuation, white-space, etc.

        Control0..1
        TypeExtension(R4B: Name for this citation (human friendly) (new)) (Extension Type: string)
        12. Basic.extension:experimental
        Slice Nameexperimental
        Definition

        R4B: Citation.experimental (new:boolean)

        ShortR4B: For testing purposes, not real usage (new)
        Comments

        Element Citation.experimental is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.experimental has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Allows filtering of citations that are appropriate for use versus not.

        Control0..1
        TypeExtension(R4B: For testing purposes, not real usage (new)) (Extension Type: boolean)
        14. Basic.extension:date
        Slice Namedate
        Definition

        R4B: Citation.date (new:dateTime)

        ShortR4B: Date last changed (new)
        Comments

        Element Citation.date is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.date has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Note that this is not the same as the resource last-modified-date, since the resource may be a secondary representation of the citation. Additional specific dates may be added as extensions or be found by consulting Provenances associated with past versions of the resource.

        Control0..1
        TypeExtension(R4B: Date last changed (new)) (Extension Type: dateTime)
        16. Basic.extension:publisher
        Slice Namepublisher
        Definition

        R4B: Citation.publisher (new:string)

        ShortR4B: The publisher of the Citation, not the publisher of the article or artifact being cited (new)
        Comments

        Element Citation.publisher is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.publisher has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Usually an organization but may be an individual. The publisher (or steward) of the citation is the organization or individual primarily responsible for the maintenance and upkeep of the citation. This is not necessarily the same individual or organization that developed and initially authored the content. The publisher is the primary point of contact for questions or issues with the citation. This item SHOULD be populated unless the information is available from context.

        Control0..1
        TypeExtension(R4B: The publisher of the Citation, not the publisher of the article or artifact being cited (new)) (Extension Type: string)
        18. Basic.extension:contact
        Slice Namecontact
        Definition

        R4B: Citation.contact (new:ContactDetail)

        ShortR4B: Contact details for the publisher of the Citation Resource (new)
        Comments

        Element Citation.contact is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.contact has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). May be a web site, an email address, a telephone number, etc.

        Control0..*
        TypeExtension(R4B: Contact details for the publisher of the Citation Resource (new)) (Complex Extension)
        20. Basic.extension:description
        Slice Namedescription
        Definition

        R4B: Citation.description (new:markdown)

        ShortR4B: Natural language description of the citation (new)
        Comments

        Element Citation.description is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.description has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). This description can be used to capture details such as why the citation was built, comments about misuse, instructions for clinical use and interpretation, literature references, examples from the paper world, etc. It is not a rendering of the citation as conveyed in the 'text' field of the resource itself. This item SHOULD be populated unless the information is available from context (e.g. the language of the citation is presumed to be the predominant language in the place the citation was created).

        Control0..1
        TypeExtension(R4B: Natural language description of the citation (new)) (Extension Type: markdown)
        22. Basic.extension:useContext
        Slice NameuseContext
        Definition

        R4B: Citation.useContext (new:UsageContext)

        ShortR4B: The context that the Citation Resource content is intended to support (new)
        Comments

        Element Citation.useContext is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.useContext has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). When multiple useContexts are specified, there is no expectation that all or any of the contexts apply.

        Control0..*
        TypeExtension(R4B: The context that the Citation Resource content is intended to support (new)) (Complex Extension)
        24. Basic.extension:jurisdiction
        Slice Namejurisdiction
        Definition

        R4B: Citation.jurisdiction (new:CodeableConcept)

        ShortR4B: Intended jurisdiction for citation (if applicable) (new)
        Comments

        Element Citation.jurisdiction is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.jurisdiction has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). It may be possible for the citation to be used in jurisdictions other than those for which it was originally designed or intended.

        Control0..*
        TypeExtension(R4B: Intended jurisdiction for citation (if applicable) (new)) (Extension Type: CodeableConcept)
        26. Basic.extension:purpose
        Slice Namepurpose
        Definition

        R4B: Citation.purpose (new:markdown)

        ShortR4B: Why this citation is defined (new)
        Comments

        Element Citation.purpose is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.purpose has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). This element does not describe the usage of the citation. Instead, it provides traceability of ''why'' the resource is either needed or ''why'' it is defined as it is. This may be used to point to source materials or specifications that drove the structure of this citation.

        Control0..1
        TypeExtension(R4B: Why this citation is defined (new)) (Extension Type: markdown)
        28. Basic.extension:copyright
        Slice Namecopyright
        Definition

        R4B: Citation.copyright (new:markdown)

        ShortR4B: Use and/or publishing restrictions for the Citation, not for the cited artifact (new)
        Comments

        Element Citation.copyright is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.copyright has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..1
        TypeExtension(R4B: Use and/or publishing restrictions for the Citation, not for the cited artifact (new)) (Extension Type: markdown)
        30. Basic.extension:approvalDate
        Slice NameapprovalDate
        Definition

        R4B: Citation.approvalDate (new:date)

        ShortR4B: When the citation was approved by publisher (new)
        Comments

        Element Citation.approvalDate is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.approvalDate has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). The 'date' element may be more recent than the approval date because of minor changes or editorial corrections.

        Control0..1
        TypeExtension(R4B: When the citation was approved by publisher (new)) (Extension Type: date)
        32. Basic.extension:lastReviewDate
        Slice NamelastReviewDate
        Definition

        R4B: Citation.lastReviewDate (new:date)

        ShortR4B: When the citation was last reviewed (new)
        Comments

        Element Citation.lastReviewDate is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.lastReviewDate has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). If specified, this date follows the original approval date.

        Control0..1
        TypeExtension(R4B: When the citation was last reviewed (new)) (Extension Type: date)
        34. Basic.extension:effectivePeriod
        Slice NameeffectivePeriod
        Definition

        R4B: Citation.effectivePeriod (new:Period)

        ShortR4B: When the citation is expected to be used (new)
        Comments

        Element Citation.effectivePeriod is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.effectivePeriod has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). The effective period for a citation determines when the content is applicable for usage and is independent of publication and review dates. For example, a measure intended to be used for the year 2016 might be published in 2015.

        Control0..1
        TypeExtension(R4B: When the citation is expected to be used (new)) (Extension Type: Period)
        36. Basic.extension:author
        Slice Nameauthor
        Definition

        R4B: Citation.author (new:ContactDetail)

        ShortR4B: Who authored the Citation (new)
        Comments

        Element Citation.author is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.author has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). While the source element matches Basic element path (), the definitions are not compatible (source: ContactDetail:0..* -> basic: Reference(http://hl7.org/fhir/StructureDefinition/Practitioner,http://hl7.org/fhir/StructureDefinition/Patient,http://hl7.org/fhir/StructureDefinition/RelatedPerson):0..1).

        Control0..*
        TypeExtension(R4B: Who authored the Citation (new)) (Complex Extension)
        38. Basic.extension:editor
        Slice Nameeditor
        Definition

        R4B: Citation.editor (new:ContactDetail)

        ShortR4B: Who edited the Citation (new)
        Comments

        Element Citation.editor is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.editor has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..*
        TypeExtension(R4B: Who edited the Citation (new)) (Complex Extension)
        40. Basic.extension:reviewer
        Slice Namereviewer
        Definition

        R4B: Citation.reviewer (new:ContactDetail)

        ShortR4B: Who reviewed the Citation (new)
        Comments

        Element Citation.reviewer is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.reviewer has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..*
        TypeExtension(R4B: Who reviewed the Citation (new)) (Complex Extension)
        42. Basic.extension:endorser
        Slice Nameendorser
        Definition

        R4B: Citation.endorser (new:ContactDetail)

        ShortR4B: Who endorsed the Citation (new)
        Comments

        Element Citation.endorser is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.endorser has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..*
        TypeExtension(R4B: Who endorsed the Citation (new)) (Complex Extension)
        44. Basic.extension:summary
        Slice Namesummary
        Definition

        R4B: Citation.summary (new:BackboneElement)

        ShortR4B: A human-readable display of the citation (new)
        Comments

        Element Citation.summary is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.summary has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..*
        TypeExtension(R4B: A human-readable display of the citation (new)) (Complex Extension)
        46. Basic.extension:classification
        Slice Nameclassification
        Definition

        R4B: Citation.classification (new:BackboneElement)

        ShortR4B: The assignment to an organizing scheme (new)
        Comments

        Element Citation.classification is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.classification has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..*
        TypeExtension(R4B: The assignment to an organizing scheme (new)) (Complex Extension)
        48. Basic.extension:note
        Slice Namenote
        Definition

        R4B: Citation.note (new:Annotation)

        ShortR4B: Used for general notes and annotations not coded elsewhere (new)
        Comments

        Element Citation.note is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.note has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..*
        TypeExtension(R4B: Used for general notes and annotations not coded elsewhere (new)) (Extension Type: Annotation)
        50. Basic.extension:currentState
        Slice NamecurrentState
        Definition

        R4B: Citation.currentState (new:CodeableConcept)

        ShortR4B: The status of the citation (new)
        Comments

        Element Citation.currentState is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.currentState has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..*
        TypeExtension(R4B: The status of the citation (new)) (Extension Type: CodeableConcept)
        52. Basic.extension:statusDate
        Slice NamestatusDate
        Definition

        R4B: Citation.statusDate (new:BackboneElement)

        ShortR4B: An effective date or period for a status of the citation (new)
        Comments

        Element Citation.statusDate is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.statusDate has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..*
        TypeExtension(R4B: An effective date or period for a status of the citation (new)) (Complex Extension)
        54. Basic.extension:relatesTo
        Slice NamerelatesTo
        Definition

        R4B: Citation.relatesTo (new:BackboneElement)

        ShortR4B: Artifact related to the Citation Resource (new)
        Comments

        Element Citation.relatesTo is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.relatesTo has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..*
        TypeExtension(R4B: Artifact related to the Citation Resource (new)) (Complex Extension)
        56. Basic.extension:citedArtifact
        Slice NamecitedArtifact
        Definition

        R4B: Citation.citedArtifact (new:BackboneElement)

        ShortR4B: The article or artifact being described (new)
        Comments

        Element Citation.citedArtifact is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.citedArtifact has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..1
        TypeExtension(R4B: The article or artifact being described (new)) (Complex Extension)
        58. Basic.modifierExtension
        Control0..*
        SlicingThis element introduces a set of slices on Basic.modifierExtension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 60. Basic.modifierExtension:status
          Slice Namestatus
          Definition

          R4B: Citation.status (new:code)

          ShortR4B: draft | active | retired | unknown (new)
          Comments

          Element Citation.status is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.status has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Allows filtering of summarys s that are appropriate for use versus not.

          Control1..1
          TypeExtension(R4B: draft | active | retired | unknown (new)) (Extension Type: code)

          Guidance on how to interpret the contents of this table can be foundhere

          0. Basic
          Definition

          Basic is used for handling concepts not yet defined in FHIR, narrative-only resources that don't map to an existing resource, and custom resources not appropriate for inclusion in the FHIR specification.

          ShortResource for non-supported content
          Control0..*
          Alternate NamesZ-resource, Extension-resource, Custom-resource
          Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
          dom-1: If the resource is contained in another resource, it SHALL NOT contain any narrative (contained.text.empty())
          dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
          dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource (contained.where(('#'+id in %resource.descendants().reference).not()).empty())
          2. Basic.id
          Definition

          The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

          ShortLogical id of this artifact
          Comments

          The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

          Control0..1
          Typeid
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          4. Basic.meta
          Definition

          The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content may not always be associated with version changes to the resource.

          ShortMetadata about the resource
          Control0..1
          TypeMeta
          Summarytrue
          6. Basic.implicitRules
          Definition

          A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content.

          ShortA set of rules under which this content was created
          Comments

          Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element.

          This element is labelled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation.

          Control0..1
          Typeuri
          Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          8. Basic.language
          Definition

          The base language in which the resource is written.

          ShortLanguage of the resource content
          Comments

          Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

          Control0..1
          BindingUnless not suitable, these codes SHALL be taken from Common Languages
          (extensible to http://hl7.org/fhir/ValueSet/languages|3.0.2)

          A human language.

          Additional BindingsPurpose
          All LanguagesMax Binding
          Typecode
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          10. Basic.text
          Definition

          A human-readable narrative that contains a summary of the resource, and may be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

          ShortText summary of the resource, for human interpretation
          Comments

          Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded in formation is added later.

          Control0..1
          This element is affected by the following invariants: dom-1
          TypeNarrative
          Alternate Namesnarrative, html, xhtml, display
          12. Basic.contained
          Definition

          These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

          ShortContained, inline Resources
          Comments

          This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again.

          Control0..*
          TypeResource
          Alternate Namesinline resources, anonymous resources, contained resources
          14. Basic.extension
          Definition

          An Extension

          ShortExtension
          Control0..*
          TypeExtension
          SlicingThis element introduces a set of slices on Basic.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ url
          • 16. Basic.extension:url
            Slice Nameurl
            Definition

            R4B: Citation.url (new:uri)

            ShortR4B: Canonical identifier for this citation, represented as a globally unique URI (new)
            Comments

            Element Citation.url is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.url has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Can be a urn:uuid: or a urn:oid: but real http: addresses are preferred. Multiple instances may share the same URL if they have a distinct version.

            Control0..1
            This element is affected by the following invariants: ele-1
            TypeExtension(R4B: Canonical identifier for this citation, represented as a globally unique URI (new)) (Extension Type: uri)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            18. Basic.extension:version
            Slice Nameversion
            Definition

            R4B: Citation.version (new:string)

            ShortR4B: Business version of the citation (new)
            Comments

            Element Citation.version is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.version has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). There may be different citation instances that have the same identifier but different versions. The version can be appended to the url in a reference to allow a reference to a particular business version of the citation with the format [url]|[version].

            Control0..1
            This element is affected by the following invariants: ele-1
            TypeExtension(R4B: Business version of the citation (new)) (Extension Type: string)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            20. Basic.extension:name
            Slice Namename
            Definition

            R4B: Citation.name (new:string)

            ShortR4B: Name for this citation (computer friendly) (new)
            Comments

            Element Citation.name is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.name has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). The name is not expected to be globally unique. The name should be a simple alphanumeric type name to ensure that it is machine-processing friendly.

            Control0..1
            This element is affected by the following invariants: ele-1
            TypeExtension(R4B: Name for this citation (computer friendly) (new)) (Extension Type: string)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            22. Basic.extension:title
            Slice Nametitle
            Definition

            R4B: Citation.title (new:string)

            ShortR4B: Name for this citation (human friendly) (new)
            Comments

            Element Citation.title is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.title has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). This name does not need to be machine-processing friendly and may contain punctuation, white-space, etc.

            Control0..1
            This element is affected by the following invariants: ele-1
            TypeExtension(R4B: Name for this citation (human friendly) (new)) (Extension Type: string)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            24. Basic.extension:experimental
            Slice Nameexperimental
            Definition

            R4B: Citation.experimental (new:boolean)

            ShortR4B: For testing purposes, not real usage (new)
            Comments

            Element Citation.experimental is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.experimental has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Allows filtering of citations that are appropriate for use versus not.

            Control0..1
            This element is affected by the following invariants: ele-1
            TypeExtension(R4B: For testing purposes, not real usage (new)) (Extension Type: boolean)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            26. Basic.extension:date
            Slice Namedate
            Definition

            R4B: Citation.date (new:dateTime)

            ShortR4B: Date last changed (new)
            Comments

            Element Citation.date is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.date has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Note that this is not the same as the resource last-modified-date, since the resource may be a secondary representation of the citation. Additional specific dates may be added as extensions or be found by consulting Provenances associated with past versions of the resource.

            Control0..1
            This element is affected by the following invariants: ele-1
            TypeExtension(R4B: Date last changed (new)) (Extension Type: dateTime)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            28. Basic.extension:publisher
            Slice Namepublisher
            Definition

            R4B: Citation.publisher (new:string)

            ShortR4B: The publisher of the Citation, not the publisher of the article or artifact being cited (new)
            Comments

            Element Citation.publisher is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.publisher has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Usually an organization but may be an individual. The publisher (or steward) of the citation is the organization or individual primarily responsible for the maintenance and upkeep of the citation. This is not necessarily the same individual or organization that developed and initially authored the content. The publisher is the primary point of contact for questions or issues with the citation. This item SHOULD be populated unless the information is available from context.

            Control0..1
            This element is affected by the following invariants: ele-1
            TypeExtension(R4B: The publisher of the Citation, not the publisher of the article or artifact being cited (new)) (Extension Type: string)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            30. Basic.extension:contact
            Slice Namecontact
            Definition

            R4B: Citation.contact (new:ContactDetail)

            ShortR4B: Contact details for the publisher of the Citation Resource (new)
            Comments

            Element Citation.contact is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.contact has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). May be a web site, an email address, a telephone number, etc.

            Control0..*
            This element is affected by the following invariants: ele-1
            TypeExtension(R4B: Contact details for the publisher of the Citation Resource (new)) (Complex Extension)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            32. Basic.extension:description
            Slice Namedescription
            Definition

            R4B: Citation.description (new:markdown)

            ShortR4B: Natural language description of the citation (new)
            Comments

            Element Citation.description is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.description has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). This description can be used to capture details such as why the citation was built, comments about misuse, instructions for clinical use and interpretation, literature references, examples from the paper world, etc. It is not a rendering of the citation as conveyed in the 'text' field of the resource itself. This item SHOULD be populated unless the information is available from context (e.g. the language of the citation is presumed to be the predominant language in the place the citation was created).

            Control0..1
            This element is affected by the following invariants: ele-1
            TypeExtension(R4B: Natural language description of the citation (new)) (Extension Type: markdown)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            34. Basic.extension:useContext
            Slice NameuseContext
            Definition

            R4B: Citation.useContext (new:UsageContext)

            ShortR4B: The context that the Citation Resource content is intended to support (new)
            Comments

            Element Citation.useContext is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.useContext has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). When multiple useContexts are specified, there is no expectation that all or any of the contexts apply.

            Control0..*
            This element is affected by the following invariants: ele-1
            TypeExtension(R4B: The context that the Citation Resource content is intended to support (new)) (Complex Extension)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            36. Basic.extension:jurisdiction
            Slice Namejurisdiction
            Definition

            R4B: Citation.jurisdiction (new:CodeableConcept)

            ShortR4B: Intended jurisdiction for citation (if applicable) (new)
            Comments

            Element Citation.jurisdiction is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.jurisdiction has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). It may be possible for the citation to be used in jurisdictions other than those for which it was originally designed or intended.

            Control0..*
            This element is affected by the following invariants: ele-1
            TypeExtension(R4B: Intended jurisdiction for citation (if applicable) (new)) (Extension Type: CodeableConcept)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            38. Basic.extension:purpose
            Slice Namepurpose
            Definition

            R4B: Citation.purpose (new:markdown)

            ShortR4B: Why this citation is defined (new)
            Comments

            Element Citation.purpose is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.purpose has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). This element does not describe the usage of the citation. Instead, it provides traceability of ''why'' the resource is either needed or ''why'' it is defined as it is. This may be used to point to source materials or specifications that drove the structure of this citation.

            Control0..1
            This element is affected by the following invariants: ele-1
            TypeExtension(R4B: Why this citation is defined (new)) (Extension Type: markdown)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            40. Basic.extension:copyright
            Slice Namecopyright
            Definition

            R4B: Citation.copyright (new:markdown)

            ShortR4B: Use and/or publishing restrictions for the Citation, not for the cited artifact (new)
            Comments

            Element Citation.copyright is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.copyright has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

            Control0..1
            This element is affected by the following invariants: ele-1
            TypeExtension(R4B: Use and/or publishing restrictions for the Citation, not for the cited artifact (new)) (Extension Type: markdown)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            42. Basic.extension:approvalDate
            Slice NameapprovalDate
            Definition

            R4B: Citation.approvalDate (new:date)

            ShortR4B: When the citation was approved by publisher (new)
            Comments

            Element Citation.approvalDate is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.approvalDate has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). The 'date' element may be more recent than the approval date because of minor changes or editorial corrections.

            Control0..1
            This element is affected by the following invariants: ele-1
            TypeExtension(R4B: When the citation was approved by publisher (new)) (Extension Type: date)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            44. Basic.extension:lastReviewDate
            Slice NamelastReviewDate
            Definition

            R4B: Citation.lastReviewDate (new:date)

            ShortR4B: When the citation was last reviewed (new)
            Comments

            Element Citation.lastReviewDate is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.lastReviewDate has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). If specified, this date follows the original approval date.

            Control0..1
            This element is affected by the following invariants: ele-1
            TypeExtension(R4B: When the citation was last reviewed (new)) (Extension Type: date)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            46. Basic.extension:effectivePeriod
            Slice NameeffectivePeriod
            Definition

            R4B: Citation.effectivePeriod (new:Period)

            ShortR4B: When the citation is expected to be used (new)
            Comments

            Element Citation.effectivePeriod is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.effectivePeriod has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). The effective period for a citation determines when the content is applicable for usage and is independent of publication and review dates. For example, a measure intended to be used for the year 2016 might be published in 2015.

            Control0..1
            This element is affected by the following invariants: ele-1
            TypeExtension(R4B: When the citation is expected to be used (new)) (Extension Type: Period)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            48. Basic.extension:author
            Slice Nameauthor
            Definition

            R4B: Citation.author (new:ContactDetail)

            ShortR4B: Who authored the Citation (new)
            Comments

            Element Citation.author is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.author has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). While the source element matches Basic element path (), the definitions are not compatible (source: ContactDetail:0..* -> basic: Reference(http://hl7.org/fhir/StructureDefinition/Practitioner,http://hl7.org/fhir/StructureDefinition/Patient,http://hl7.org/fhir/StructureDefinition/RelatedPerson):0..1).

            Control0..*
            This element is affected by the following invariants: ele-1
            TypeExtension(R4B: Who authored the Citation (new)) (Complex Extension)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            50. Basic.extension:editor
            Slice Nameeditor
            Definition

            R4B: Citation.editor (new:ContactDetail)

            ShortR4B: Who edited the Citation (new)
            Comments

            Element Citation.editor is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.editor has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

            Control0..*
            This element is affected by the following invariants: ele-1
            TypeExtension(R4B: Who edited the Citation (new)) (Complex Extension)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            52. Basic.extension:reviewer
            Slice Namereviewer
            Definition

            R4B: Citation.reviewer (new:ContactDetail)

            ShortR4B: Who reviewed the Citation (new)
            Comments

            Element Citation.reviewer is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.reviewer has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

            Control0..*
            This element is affected by the following invariants: ele-1
            TypeExtension(R4B: Who reviewed the Citation (new)) (Complex Extension)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            54. Basic.extension:endorser
            Slice Nameendorser
            Definition

            R4B: Citation.endorser (new:ContactDetail)

            ShortR4B: Who endorsed the Citation (new)
            Comments

            Element Citation.endorser is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.endorser has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

            Control0..*
            This element is affected by the following invariants: ele-1
            TypeExtension(R4B: Who endorsed the Citation (new)) (Complex Extension)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            56. Basic.extension:summary
            Slice Namesummary
            Definition

            R4B: Citation.summary (new:BackboneElement)

            ShortR4B: A human-readable display of the citation (new)
            Comments

            Element Citation.summary is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.summary has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

            Control0..*
            This element is affected by the following invariants: ele-1
            TypeExtension(R4B: A human-readable display of the citation (new)) (Complex Extension)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            58. Basic.extension:classification
            Slice Nameclassification
            Definition

            R4B: Citation.classification (new:BackboneElement)

            ShortR4B: The assignment to an organizing scheme (new)
            Comments

            Element Citation.classification is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.classification has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

            Control0..*
            This element is affected by the following invariants: ele-1
            TypeExtension(R4B: The assignment to an organizing scheme (new)) (Complex Extension)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            60. Basic.extension:note
            Slice Namenote
            Definition

            R4B: Citation.note (new:Annotation)

            ShortR4B: Used for general notes and annotations not coded elsewhere (new)
            Comments

            Element Citation.note is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.note has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

            Control0..*
            This element is affected by the following invariants: ele-1
            TypeExtension(R4B: Used for general notes and annotations not coded elsewhere (new)) (Extension Type: Annotation)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            62. Basic.extension:currentState
            Slice NamecurrentState
            Definition

            R4B: Citation.currentState (new:CodeableConcept)

            ShortR4B: The status of the citation (new)
            Comments

            Element Citation.currentState is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.currentState has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

            Control0..*
            This element is affected by the following invariants: ele-1
            TypeExtension(R4B: The status of the citation (new)) (Extension Type: CodeableConcept)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            64. Basic.extension:statusDate
            Slice NamestatusDate
            Definition

            R4B: Citation.statusDate (new:BackboneElement)

            ShortR4B: An effective date or period for a status of the citation (new)
            Comments

            Element Citation.statusDate is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.statusDate has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

            Control0..*
            This element is affected by the following invariants: ele-1
            TypeExtension(R4B: An effective date or period for a status of the citation (new)) (Complex Extension)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            66. Basic.extension:relatesTo
            Slice NamerelatesTo
            Definition

            R4B: Citation.relatesTo (new:BackboneElement)

            ShortR4B: Artifact related to the Citation Resource (new)
            Comments

            Element Citation.relatesTo is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.relatesTo has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

            Control0..*
            This element is affected by the following invariants: ele-1
            TypeExtension(R4B: Artifact related to the Citation Resource (new)) (Complex Extension)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            68. Basic.extension:citedArtifact
            Slice NamecitedArtifact
            Definition

            R4B: Citation.citedArtifact (new:BackboneElement)

            ShortR4B: The article or artifact being described (new)
            Comments

            Element Citation.citedArtifact is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.citedArtifact has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

            Control0..1
            This element is affected by the following invariants: ele-1
            TypeExtension(R4B: The article or artifact being described (new)) (Complex Extension)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            70. Basic.modifierExtension
            Definition

            An Extension

            ShortExtension
            Control0..*
            TypeExtension
            Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
            SlicingThis element introduces a set of slices on Basic.modifierExtension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • value @ url
            • 72. Basic.modifierExtension:status
              Slice Namestatus
              Definition

              R4B: Citation.status (new:code)

              ShortR4B: draft | active | retired | unknown (new)
              Comments

              Element Citation.status is not mapped to FHIR STU3, since FHIR R4B Citation is not mapped. Element Citation.status has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Allows filtering of summarys s that are appropriate for use versus not.

              Control1..1
              This element is affected by the following invariants: ele-1
              TypeExtension(R4B: draft | active | retired | unknown (new)) (Extension Type: code)
              Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              74. Basic.identifier
              Definition

              Identifier assigned to the resource for business purposes, outside the context of FHIR.

              ShortBusiness identifier
              NoteThis is a business identifier, not a resource identifier (see discussion)
              Control0..*
              TypeIdentifier
              Summarytrue
              76. Basic.code
              Definition

              Identifies the 'type' of resource - equivalent to the resource name for other resources.

              ShortKind of Resource
              Comments

              Because resource references will only be able to indicate 'Basic', the type of reference will need to be specified in a Profile identified as part of the resource. Refer to the resource notes section for information on appropriate terminologies for this code.

              This element is labeled as a modifier because the it defines the meaning of the resource and cannot be ignored.

              Control1..1
              BindingFor example codes, see Basic Resource Types
              (example to http://hl7.org/fhir/ValueSet/basic-resource-type|3.0.2)

              Codes for identifying types of resources not yet defined by FHIR

              TypeCodeableConcept
              Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
              Summarytrue
              Requirements

              Must be able to distinguish different types of Basic resources.

              78. Basic.subject
              Definition

              Identifies the patient, practitioner, device or any other resource that is the "focus" of this resource.

              ShortIdentifies the focus of this resource
              Comments

              Optional as not all potential resources will have subjects. Resources associated with multiple subjects can handle this via extension.

              Control0..1
              TypeReference(Resource)
              Summarytrue
              Requirements

              Needed for partitioning the resource by Patient.

              80. Basic.created
              Definition

              Identifies when the resource was first created.

              ShortWhen created
              Control0..1
              Typedate
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Requirements

              Allows ordering resource instances by time.

              82. Basic.author
              Definition

              Indicates who was responsible for creating the resource instance.

              ShortWho created
              Control0..1
              TypeReference(Practitioner, Patient, RelatedPerson)
              Summarytrue
              Requirements

              Needed for partitioning the resource.