ExtensionDeviceDefinition_PhysicalCharacteristics - Definitions - Extensions for Using Data Elements from FHIR R4B in FHIR STU3 v0.1.0

Extensions for Using Data Elements from FHIR R4B in FHIR STU3 - Downloaded Version null See the Directory of published versions

Extension: ExtensionDeviceDefinition_PhysicalCharacteristics - Detailed Descriptions

Page standards status: Trial-use

Maturity Level: 0

Definitions for the ext-R4B-DeviceDefinition.physicalCharacteristics extension.

Key Elements Table
Differential Elements Table
Snapshot Elements Table

Guidance on how to interpret the contents of this table can be foundhere

0. Extension
Definition	R4B: `DeviceDefinition.physicalCharacteristics` (new:ProdCharacteristic) Optional Extension Element - found in all resources.
Short	R4B: Dimensions, color etc. (new)Optional Extensions Element
Comments	Element `DeviceDefinition.physicalCharacteristics` is not mapped to FHIR STU3, since FHIR R4B `DeviceDefinition` is not mapped. Element `DeviceDefinition.physicalCharacteristics` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1* This element is affected by the following invariants: ele-1
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() \| (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
2. Extension.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
4. Extension.extension:_datatype
Slice Name	_datatype
Definition	Slice to indicate the presence of a R4B `ProdCharacteristic` in FHIR STU3
Short	DataType slice for a FHIR R4B `ProdCharacteristic` valueAdditional Content defined by implementations
Control	10..1*
Type	Extension
6. Extension.extension:_datatype.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`http://hl7.org/fhir/StructureDefinition/_datatype`
8. Extension.extension:_datatype.value[x]
Definition	Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Value of extension
Comments	Must be: ProdCharacteristic
Control	10..1
Type	string, date, dateTime, Meta, code, Address, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Quantity, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal, CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Fixed Value	`ProdCharacteristic`
10. Extension.extension:height
Slice Name	height
Definition	R4B: `ProdCharacteristic.height` (new:Quantity)
Short	R4B: Where applicable, the height can be specified using a numerical value and its unit of measurement The unit of measurement shall be specified in accordance with ISO 11240 and the resulting terminology The symbol and the symbol identifier shall be used (new)Additional Content defined by implementations
Comments	Element `ProdCharacteristic.height` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.height` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1*
Type	Extension
Requirements	Element `ProdCharacteristic.height` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.height` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
12. Extension.extension:height.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`height`
14. Extension.extension:height.value[x]
Definition	Where applicable, the height can be specified using a numerical value and its unit of measurement The unit of measurement shall be specified in accordance with ISO 11240 and the resulting terminology The symbol and the symbol identifier shall be used. Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Where applicable, the height can be specified using a numerical value and its unit of measurement The unit of measurement shall be specified in accordance with ISO 11240 and the resulting terminology The symbol and the symbol identifier shall be usedValue of extension
Control	0..1
Type	Quantity, date, dateTime, Meta, code, string, Address, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal, CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
16. Extension.extension:width
Slice Name	width
Definition	R4B: `ProdCharacteristic.width` (new:Quantity)
Short	R4B: Where applicable, the width can be specified using a numerical value and its unit of measurement The unit of measurement shall be specified in accordance with ISO 11240 and the resulting terminology The symbol and the symbol identifier shall be used (new)Additional Content defined by implementations
Comments	Element `ProdCharacteristic.width` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.width` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1*
Type	Extension
Requirements	Element `ProdCharacteristic.width` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.width` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
18. Extension.extension:width.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`width`
20. Extension.extension:width.value[x]
Definition	Where applicable, the width can be specified using a numerical value and its unit of measurement The unit of measurement shall be specified in accordance with ISO 11240 and the resulting terminology The symbol and the symbol identifier shall be used. Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Where applicable, the width can be specified using a numerical value and its unit of measurement The unit of measurement shall be specified in accordance with ISO 11240 and the resulting terminology The symbol and the symbol identifier shall be usedValue of extension
Control	0..1
Type	Quantity, date, dateTime, Meta, code, string, Address, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal, CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
22. Extension.extension:depth
Slice Name	depth
Definition	R4B: `ProdCharacteristic.depth` (new:Quantity)
Short	R4B: Where applicable, the depth can be specified using a numerical value and its unit of measurement The unit of measurement shall be specified in accordance with ISO 11240 and the resulting terminology The symbol and the symbol identifier shall be used (new)Additional Content defined by implementations
Comments	Element `ProdCharacteristic.depth` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.depth` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1*
Type	Extension
Requirements	Element `ProdCharacteristic.depth` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.depth` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
24. Extension.extension:depth.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`depth`
26. Extension.extension:depth.value[x]
Definition	Where applicable, the depth can be specified using a numerical value and its unit of measurement The unit of measurement shall be specified in accordance with ISO 11240 and the resulting terminology The symbol and the symbol identifier shall be used. Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Where applicable, the depth can be specified using a numerical value and its unit of measurement The unit of measurement shall be specified in accordance with ISO 11240 and the resulting terminology The symbol and the symbol identifier shall be usedValue of extension
Control	0..1
Type	Quantity, date, dateTime, Meta, code, string, Address, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal, CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
28. Extension.extension:weight
Slice Name	weight
Definition	R4B: `ProdCharacteristic.weight` (new:Quantity)
Short	R4B: Where applicable, the weight can be specified using a numerical value and its unit of measurement The unit of measurement shall be specified in accordance with ISO 11240 and the resulting terminology The symbol and the symbol identifier shall be used (new)Additional Content defined by implementations
Comments	Element `ProdCharacteristic.weight` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.weight` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1*
Type	Extension
Requirements	Element `ProdCharacteristic.weight` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.weight` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
30. Extension.extension:weight.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`weight`
32. Extension.extension:weight.value[x]
Definition	Where applicable, the weight can be specified using a numerical value and its unit of measurement The unit of measurement shall be specified in accordance with ISO 11240 and the resulting terminology The symbol and the symbol identifier shall be used. Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Where applicable, the weight can be specified using a numerical value and its unit of measurement The unit of measurement shall be specified in accordance with ISO 11240 and the resulting terminology The symbol and the symbol identifier shall be usedValue of extension
Control	0..1
Type	Quantity, date, dateTime, Meta, code, string, Address, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal, CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
34. Extension.extension:nominalVolume
Slice Name	nominalVolume
Definition	R4B: `ProdCharacteristic.nominalVolume` (new:Quantity)
Short	R4B: Where applicable, the nominal volume can be specified using a numerical value and its unit of measurement The unit of measurement shall be specified in accordance with ISO 11240 and the resulting terminology The symbol and the symbol identifier shall be used (new)Additional Content defined by implementations
Comments	Element `ProdCharacteristic.nominalVolume` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.nominalVolume` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1*
Type	Extension
Requirements	Element `ProdCharacteristic.nominalVolume` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.nominalVolume` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
36. Extension.extension:nominalVolume.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`nominalVolume`
38. Extension.extension:nominalVolume.value[x]
Definition	Where applicable, the nominal volume can be specified using a numerical value and its unit of measurement The unit of measurement shall be specified in accordance with ISO 11240 and the resulting terminology The symbol and the symbol identifier shall be used. Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Where applicable, the nominal volume can be specified using a numerical value and its unit of measurement The unit of measurement shall be specified in accordance with ISO 11240 and the resulting terminology The symbol and the symbol identifier shall be usedValue of extension
Control	0..1
Type	Quantity, date, dateTime, Meta, code, string, Address, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal, CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
40. Extension.extension:externalDiameter
Slice Name	externalDiameter
Definition	R4B: `ProdCharacteristic.externalDiameter` (new:Quantity)
Short	R4B: Where applicable, the external diameter can be specified using a numerical value and its unit of measurement The unit of measurement shall be specified in accordance with ISO 11240 and the resulting terminology The symbol and the symbol identifier shall be used (new)Additional Content defined by implementations
Comments	Element `ProdCharacteristic.externalDiameter` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.externalDiameter` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1*
Type	Extension
Requirements	Element `ProdCharacteristic.externalDiameter` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.externalDiameter` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
42. Extension.extension:externalDiameter.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`externalDiameter`
44. Extension.extension:externalDiameter.value[x]
Definition	Where applicable, the external diameter can be specified using a numerical value and its unit of measurement The unit of measurement shall be specified in accordance with ISO 11240 and the resulting terminology The symbol and the symbol identifier shall be used. Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Where applicable, the external diameter can be specified using a numerical value and its unit of measurement The unit of measurement shall be specified in accordance with ISO 11240 and the resulting terminology The symbol and the symbol identifier shall be usedValue of extension
Control	0..1
Type	Quantity, date, dateTime, Meta, code, string, Address, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal, CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
46. Extension.extension:shape
Slice Name	shape
Definition	R4B: `ProdCharacteristic.shape` (new:string)
Short	R4B: Where applicable, the shape can be specified An appropriate controlled vocabulary shall be used The term and the term identifier shall be used (new)Additional Content defined by implementations
Comments	Element `ProdCharacteristic.shape` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.shape` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1*
Type	Extension
Requirements	Element `ProdCharacteristic.shape` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.shape` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
48. Extension.extension:shape.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`shape`
50. Extension.extension:shape.value[x]
Definition	Where applicable, the shape can be specified An appropriate controlled vocabulary shall be used The term and the term identifier shall be used. Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Where applicable, the shape can be specified An appropriate controlled vocabulary shall be used The term and the term identifier shall be usedValue of extension
Control	0..1
Type	string, date, dateTime, Meta, code, Address, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Quantity, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal, CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
52. Extension.extension:color
Slice Name	color
Definition	R4B: `ProdCharacteristic.color` (new:string)
Short	R4B: Where applicable, the color can be specified An appropriate controlled vocabulary shall be used The term and the term identifier shall be used (new)Additional Content defined by implementations
Comments	Element `ProdCharacteristic.color` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.color` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension
Requirements	Element `ProdCharacteristic.color` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.color` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
54. Extension.extension:color.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`color`
56. Extension.extension:color.value[x]
Definition	Where applicable, the color can be specified An appropriate controlled vocabulary shall be used The term and the term identifier shall be used. Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Where applicable, the color can be specified An appropriate controlled vocabulary shall be used The term and the term identifier shall be usedValue of extension
Control	0..1
Type	string, date, dateTime, Meta, code, Address, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Quantity, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal, CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
58. Extension.extension:imprint
Slice Name	imprint
Definition	R4B: `ProdCharacteristic.imprint` (new:string)
Short	R4B: Where applicable, the imprint can be specified as text (new)Additional Content defined by implementations
Comments	Element `ProdCharacteristic.imprint` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.imprint` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension
Requirements	Element `ProdCharacteristic.imprint` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.imprint` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
60. Extension.extension:imprint.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`imprint`
62. Extension.extension:imprint.value[x]
Definition	Where applicable, the imprint can be specified as text. Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Where applicable, the imprint can be specified as textValue of extension
Control	0..1
Type	string, date, dateTime, Meta, code, Address, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Quantity, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal, CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
64. Extension.extension:image
Slice Name	image
Definition	R4B: `ProdCharacteristic.image` (new:Attachment)
Short	R4B: Where applicable, the image can be provided The format of the image attachment shall be specified by regional implementations (new)Additional Content defined by implementations
Comments	Element `ProdCharacteristic.image` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.image` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension
Requirements	Element `ProdCharacteristic.image` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.image` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
66. Extension.extension:image.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`image`
68. Extension.extension:image.value[x]
Definition	Where applicable, the image can be provided The format of the image attachment shall be specified by regional implementations. Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Where applicable, the image can be provided The format of the image attachment shall be specified by regional implementationsValue of extension
Control	0..1
Type	Attachment, date, dateTime, Meta, code, string, Address, integer, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Quantity, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal, CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
70. Extension.extension:scoring
Slice Name	scoring
Definition	R4B: `ProdCharacteristic.scoring` (new:CodeableConcept)
Short	R4B: Where applicable, the scoring can be specified An appropriate controlled vocabulary shall be used The term and the term identifier shall be used (new)Additional Content defined by implementations
Comments	Element `ProdCharacteristic.scoring` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.scoring` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1*
Type	Extension
Requirements	Element `ProdCharacteristic.scoring` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.scoring` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
72. Extension.extension:scoring.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`scoring`
74. Extension.extension:scoring.value[x]
Definition	Where applicable, the scoring can be specified An appropriate controlled vocabulary shall be used The term and the term identifier shall be used. Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Where applicable, the scoring can be specified An appropriate controlled vocabulary shall be used The term and the term identifier shall be usedValue of extension
Control	0..1
Type	CodeableConcept, date, dateTime, Meta, code, string, Address, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Quantity, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
76. Extension.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`http://hl7.org/fhir/4.3/StructureDefinition/extension-DeviceDefinition.physicalCharacteristics`
78. Extension.value[x]
Definition	Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Value of extension
Control	0..01
Type	Choice of: base64Binary, boolean, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, Meta
Primitive Value	This primitive element may be present, or absent, or replaced by an extension

Guidance on how to interpret the contents of this table can be foundhere

0. Extension
Definition	R4B: `DeviceDefinition.physicalCharacteristics` (new:ProdCharacteristic)
Short	R4B: Dimensions, color etc. (new)
Comments	Element `DeviceDefinition.physicalCharacteristics` is not mapped to FHIR STU3, since FHIR R4B `DeviceDefinition` is not mapped. Element `DeviceDefinition.physicalCharacteristics` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Is Modifier	false
2. Extension.extension
Control	0..*
Slicing	This element introduces a set of slices on `Extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
4. Extension.extension:_datatype
Slice Name	_datatype
Definition	Slice to indicate the presence of a R4B `ProdCharacteristic` in FHIR STU3
Short	DataType slice for a FHIR R4B `ProdCharacteristic` value
Control	1..1
6. Extension.extension:_datatype.url
Control	1..1
Fixed Value	`http://hl7.org/fhir/StructureDefinition/_datatype`
8. Extension.extension:_datatype.value[x]
Comments	Must be: ProdCharacteristic
Control	1..1
Type	string
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Fixed Value	`ProdCharacteristic`
10. Extension.extension:height
Slice Name	height
Definition	R4B: `ProdCharacteristic.height` (new:Quantity)
Short	R4B: Where applicable, the height can be specified using a numerical value and its unit of measurement The unit of measurement shall be specified in accordance with ISO 11240 and the resulting terminology The symbol and the symbol identifier shall be used (new)
Comments	Element `ProdCharacteristic.height` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.height` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Requirements	Element `ProdCharacteristic.height` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.height` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
12. Extension.extension:height.url
Control	1..1
Fixed Value	`height`
14. Extension.extension:height.value[x]
Definition	Where applicable, the height can be specified using a numerical value and its unit of measurement The unit of measurement shall be specified in accordance with ISO 11240 and the resulting terminology The symbol and the symbol identifier shall be used.
Short	Where applicable, the height can be specified using a numerical value and its unit of measurement The unit of measurement shall be specified in accordance with ISO 11240 and the resulting terminology The symbol and the symbol identifier shall be used
Control	0..1
Type	Quantity
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
16. Extension.extension:width
Slice Name	width
Definition	R4B: `ProdCharacteristic.width` (new:Quantity)
Short	R4B: Where applicable, the width can be specified using a numerical value and its unit of measurement The unit of measurement shall be specified in accordance with ISO 11240 and the resulting terminology The symbol and the symbol identifier shall be used (new)
Comments	Element `ProdCharacteristic.width` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.width` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Requirements	Element `ProdCharacteristic.width` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.width` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
18. Extension.extension:width.url
Control	1..1
Fixed Value	`width`
20. Extension.extension:width.value[x]
Definition	Where applicable, the width can be specified using a numerical value and its unit of measurement The unit of measurement shall be specified in accordance with ISO 11240 and the resulting terminology The symbol and the symbol identifier shall be used.
Short	Where applicable, the width can be specified using a numerical value and its unit of measurement The unit of measurement shall be specified in accordance with ISO 11240 and the resulting terminology The symbol and the symbol identifier shall be used
Control	0..1
Type	Quantity
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
22. Extension.extension:depth
Slice Name	depth
Definition	R4B: `ProdCharacteristic.depth` (new:Quantity)
Short	R4B: Where applicable, the depth can be specified using a numerical value and its unit of measurement The unit of measurement shall be specified in accordance with ISO 11240 and the resulting terminology The symbol and the symbol identifier shall be used (new)
Comments	Element `ProdCharacteristic.depth` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.depth` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Requirements	Element `ProdCharacteristic.depth` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.depth` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
24. Extension.extension:depth.url
Control	1..1
Fixed Value	`depth`
26. Extension.extension:depth.value[x]
Definition	Where applicable, the depth can be specified using a numerical value and its unit of measurement The unit of measurement shall be specified in accordance with ISO 11240 and the resulting terminology The symbol and the symbol identifier shall be used.
Short	Where applicable, the depth can be specified using a numerical value and its unit of measurement The unit of measurement shall be specified in accordance with ISO 11240 and the resulting terminology The symbol and the symbol identifier shall be used
Control	0..1
Type	Quantity
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
28. Extension.extension:weight
Slice Name	weight
Definition	R4B: `ProdCharacteristic.weight` (new:Quantity)
Short	R4B: Where applicable, the weight can be specified using a numerical value and its unit of measurement The unit of measurement shall be specified in accordance with ISO 11240 and the resulting terminology The symbol and the symbol identifier shall be used (new)
Comments	Element `ProdCharacteristic.weight` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.weight` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Requirements	Element `ProdCharacteristic.weight` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.weight` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
30. Extension.extension:weight.url
Control	1..1
Fixed Value	`weight`
32. Extension.extension:weight.value[x]
Definition	Where applicable, the weight can be specified using a numerical value and its unit of measurement The unit of measurement shall be specified in accordance with ISO 11240 and the resulting terminology The symbol and the symbol identifier shall be used.
Short	Where applicable, the weight can be specified using a numerical value and its unit of measurement The unit of measurement shall be specified in accordance with ISO 11240 and the resulting terminology The symbol and the symbol identifier shall be used
Control	0..1
Type	Quantity
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
34. Extension.extension:nominalVolume
Slice Name	nominalVolume
Definition	R4B: `ProdCharacteristic.nominalVolume` (new:Quantity)
Short	R4B: Where applicable, the nominal volume can be specified using a numerical value and its unit of measurement The unit of measurement shall be specified in accordance with ISO 11240 and the resulting terminology The symbol and the symbol identifier shall be used (new)
Comments	Element `ProdCharacteristic.nominalVolume` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.nominalVolume` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Requirements	Element `ProdCharacteristic.nominalVolume` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.nominalVolume` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
36. Extension.extension:nominalVolume.url
Control	1..1
Fixed Value	`nominalVolume`
38. Extension.extension:nominalVolume.value[x]
Definition	Where applicable, the nominal volume can be specified using a numerical value and its unit of measurement The unit of measurement shall be specified in accordance with ISO 11240 and the resulting terminology The symbol and the symbol identifier shall be used.
Short	Where applicable, the nominal volume can be specified using a numerical value and its unit of measurement The unit of measurement shall be specified in accordance with ISO 11240 and the resulting terminology The symbol and the symbol identifier shall be used
Control	0..1
Type	Quantity
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
40. Extension.extension:externalDiameter
Slice Name	externalDiameter
Definition	R4B: `ProdCharacteristic.externalDiameter` (new:Quantity)
Short	R4B: Where applicable, the external diameter can be specified using a numerical value and its unit of measurement The unit of measurement shall be specified in accordance with ISO 11240 and the resulting terminology The symbol and the symbol identifier shall be used (new)
Comments	Element `ProdCharacteristic.externalDiameter` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.externalDiameter` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Requirements	Element `ProdCharacteristic.externalDiameter` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.externalDiameter` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
42. Extension.extension:externalDiameter.url
Control	1..1
Fixed Value	`externalDiameter`
44. Extension.extension:externalDiameter.value[x]
Definition	Where applicable, the external diameter can be specified using a numerical value and its unit of measurement The unit of measurement shall be specified in accordance with ISO 11240 and the resulting terminology The symbol and the symbol identifier shall be used.
Short	Where applicable, the external diameter can be specified using a numerical value and its unit of measurement The unit of measurement shall be specified in accordance with ISO 11240 and the resulting terminology The symbol and the symbol identifier shall be used
Control	0..1
Type	Quantity
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
46. Extension.extension:shape
Slice Name	shape
Definition	R4B: `ProdCharacteristic.shape` (new:string)
Short	R4B: Where applicable, the shape can be specified An appropriate controlled vocabulary shall be used The term and the term identifier shall be used (new)
Comments	Element `ProdCharacteristic.shape` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.shape` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Requirements	Element `ProdCharacteristic.shape` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.shape` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
48. Extension.extension:shape.url
Control	1..1
Fixed Value	`shape`
50. Extension.extension:shape.value[x]
Definition	Where applicable, the shape can be specified An appropriate controlled vocabulary shall be used The term and the term identifier shall be used.
Short	Where applicable, the shape can be specified An appropriate controlled vocabulary shall be used The term and the term identifier shall be used
Control	0..1
Type	string
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
52. Extension.extension:color
Slice Name	color
Definition	R4B: `ProdCharacteristic.color` (new:string)
Short	R4B: Where applicable, the color can be specified An appropriate controlled vocabulary shall be used The term and the term identifier shall be used (new)
Comments	Element `ProdCharacteristic.color` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.color` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..*
Requirements	Element `ProdCharacteristic.color` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.color` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
54. Extension.extension:color.url
Control	1..1
Fixed Value	`color`
56. Extension.extension:color.value[x]
Definition	Where applicable, the color can be specified An appropriate controlled vocabulary shall be used The term and the term identifier shall be used.
Short	Where applicable, the color can be specified An appropriate controlled vocabulary shall be used The term and the term identifier shall be used
Control	0..1
Type	string
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
58. Extension.extension:imprint
Slice Name	imprint
Definition	R4B: `ProdCharacteristic.imprint` (new:string)
Short	R4B: Where applicable, the imprint can be specified as text (new)
Comments	Element `ProdCharacteristic.imprint` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.imprint` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..*
Requirements	Element `ProdCharacteristic.imprint` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.imprint` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
60. Extension.extension:imprint.url
Control	1..1
Fixed Value	`imprint`
62. Extension.extension:imprint.value[x]
Definition	Where applicable, the imprint can be specified as text.
Short	Where applicable, the imprint can be specified as text
Control	0..1
Type	string
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
64. Extension.extension:image
Slice Name	image
Definition	R4B: `ProdCharacteristic.image` (new:Attachment)
Short	R4B: Where applicable, the image can be provided The format of the image attachment shall be specified by regional implementations (new)
Comments	Element `ProdCharacteristic.image` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.image` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..*
Requirements	Element `ProdCharacteristic.image` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.image` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
66. Extension.extension:image.url
Control	1..1
Fixed Value	`image`
68. Extension.extension:image.value[x]
Definition	Where applicable, the image can be provided The format of the image attachment shall be specified by regional implementations.
Short	Where applicable, the image can be provided The format of the image attachment shall be specified by regional implementations
Control	0..1
Type	Attachment
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
70. Extension.extension:scoring
Slice Name	scoring
Definition	R4B: `ProdCharacteristic.scoring` (new:CodeableConcept)
Short	R4B: Where applicable, the scoring can be specified An appropriate controlled vocabulary shall be used The term and the term identifier shall be used (new)
Comments	Element `ProdCharacteristic.scoring` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.scoring` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Requirements	Element `ProdCharacteristic.scoring` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.scoring` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
72. Extension.extension:scoring.url
Control	1..1
Fixed Value	`scoring`
74. Extension.extension:scoring.value[x]
Definition	Where applicable, the scoring can be specified An appropriate controlled vocabulary shall be used The term and the term identifier shall be used.
Short	Where applicable, the scoring can be specified An appropriate controlled vocabulary shall be used The term and the term identifier shall be used
Control	0..1
Type	CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
76. Extension.url
Control	1..1
Fixed Value	`http://hl7.org/fhir/4.3/StructureDefinition/extension-DeviceDefinition.physicalCharacteristics`
78. Extension.value[x]
Control	0..0

Guidance on how to interpret the contents of this table can be foundhere

0. Extension
Definition	R4B: `DeviceDefinition.physicalCharacteristics` (new:ProdCharacteristic)
Short	R4B: Dimensions, color etc. (new)
Comments	Element `DeviceDefinition.physicalCharacteristics` is not mapped to FHIR STU3, since FHIR R4B `DeviceDefinition` is not mapped. Element `DeviceDefinition.physicalCharacteristics` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1 This element is affected by the following invariants: ele-1
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
2. Extension.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
4. Extension.extension
Definition	An Extension
Short	Extension
Control	0..*
Type	Extension
Slicing	This element introduces a set of slices on `Extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
6. Extension.extension:_datatype
Slice Name	_datatype
Definition	Slice to indicate the presence of a R4B `ProdCharacteristic` in FHIR STU3
Short	DataType slice for a FHIR R4B `ProdCharacteristic` value
Control	1..1
Type	Extension
8. Extension.extension:_datatype.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
10. Extension.extension:_datatype.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
12. Extension.extension:_datatype.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`http://hl7.org/fhir/StructureDefinition/_datatype`
14. Extension.extension:_datatype.value[x]
Definition	Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Value of extension
Comments	Must be: ProdCharacteristic
Control	1..1
Type	string
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Fixed Value	`ProdCharacteristic`
16. Extension.extension:height
Slice Name	height
Definition	R4B: `ProdCharacteristic.height` (new:Quantity)
Short	R4B: Where applicable, the height can be specified using a numerical value and its unit of measurement The unit of measurement shall be specified in accordance with ISO 11240 and the resulting terminology The symbol and the symbol identifier shall be used (new)
Comments	Element `ProdCharacteristic.height` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.height` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension
Requirements	Element `ProdCharacteristic.height` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.height` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
18. Extension.extension:height.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
20. Extension.extension:height.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
22. Extension.extension:height.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`height`
24. Extension.extension:height.value[x]
Definition	Where applicable, the height can be specified using a numerical value and its unit of measurement The unit of measurement shall be specified in accordance with ISO 11240 and the resulting terminology The symbol and the symbol identifier shall be used.
Short	Where applicable, the height can be specified using a numerical value and its unit of measurement The unit of measurement shall be specified in accordance with ISO 11240 and the resulting terminology The symbol and the symbol identifier shall be used
Control	0..1
Type	Quantity
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
26. Extension.extension:width
Slice Name	width
Definition	R4B: `ProdCharacteristic.width` (new:Quantity)
Short	R4B: Where applicable, the width can be specified using a numerical value and its unit of measurement The unit of measurement shall be specified in accordance with ISO 11240 and the resulting terminology The symbol and the symbol identifier shall be used (new)
Comments	Element `ProdCharacteristic.width` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.width` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension
Requirements	Element `ProdCharacteristic.width` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.width` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
28. Extension.extension:width.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
30. Extension.extension:width.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
32. Extension.extension:width.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`width`
34. Extension.extension:width.value[x]
Definition	Where applicable, the width can be specified using a numerical value and its unit of measurement The unit of measurement shall be specified in accordance with ISO 11240 and the resulting terminology The symbol and the symbol identifier shall be used.
Short	Where applicable, the width can be specified using a numerical value and its unit of measurement The unit of measurement shall be specified in accordance with ISO 11240 and the resulting terminology The symbol and the symbol identifier shall be used
Control	0..1
Type	Quantity
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
36. Extension.extension:depth
Slice Name	depth
Definition	R4B: `ProdCharacteristic.depth` (new:Quantity)
Short	R4B: Where applicable, the depth can be specified using a numerical value and its unit of measurement The unit of measurement shall be specified in accordance with ISO 11240 and the resulting terminology The symbol and the symbol identifier shall be used (new)
Comments	Element `ProdCharacteristic.depth` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.depth` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension
Requirements	Element `ProdCharacteristic.depth` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.depth` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
38. Extension.extension:depth.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
40. Extension.extension:depth.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
42. Extension.extension:depth.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`depth`
44. Extension.extension:depth.value[x]
Definition	Where applicable, the depth can be specified using a numerical value and its unit of measurement The unit of measurement shall be specified in accordance with ISO 11240 and the resulting terminology The symbol and the symbol identifier shall be used.
Short	Where applicable, the depth can be specified using a numerical value and its unit of measurement The unit of measurement shall be specified in accordance with ISO 11240 and the resulting terminology The symbol and the symbol identifier shall be used
Control	0..1
Type	Quantity
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
46. Extension.extension:weight
Slice Name	weight
Definition	R4B: `ProdCharacteristic.weight` (new:Quantity)
Short	R4B: Where applicable, the weight can be specified using a numerical value and its unit of measurement The unit of measurement shall be specified in accordance with ISO 11240 and the resulting terminology The symbol and the symbol identifier shall be used (new)
Comments	Element `ProdCharacteristic.weight` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.weight` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension
Requirements	Element `ProdCharacteristic.weight` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.weight` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
48. Extension.extension:weight.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
50. Extension.extension:weight.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
52. Extension.extension:weight.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`weight`
54. Extension.extension:weight.value[x]
Definition	Where applicable, the weight can be specified using a numerical value and its unit of measurement The unit of measurement shall be specified in accordance with ISO 11240 and the resulting terminology The symbol and the symbol identifier shall be used.
Short	Where applicable, the weight can be specified using a numerical value and its unit of measurement The unit of measurement shall be specified in accordance with ISO 11240 and the resulting terminology The symbol and the symbol identifier shall be used
Control	0..1
Type	Quantity
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
56. Extension.extension:nominalVolume
Slice Name	nominalVolume
Definition	R4B: `ProdCharacteristic.nominalVolume` (new:Quantity)
Short	R4B: Where applicable, the nominal volume can be specified using a numerical value and its unit of measurement The unit of measurement shall be specified in accordance with ISO 11240 and the resulting terminology The symbol and the symbol identifier shall be used (new)
Comments	Element `ProdCharacteristic.nominalVolume` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.nominalVolume` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension
Requirements	Element `ProdCharacteristic.nominalVolume` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.nominalVolume` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
58. Extension.extension:nominalVolume.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
60. Extension.extension:nominalVolume.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
62. Extension.extension:nominalVolume.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`nominalVolume`
64. Extension.extension:nominalVolume.value[x]
Definition	Where applicable, the nominal volume can be specified using a numerical value and its unit of measurement The unit of measurement shall be specified in accordance with ISO 11240 and the resulting terminology The symbol and the symbol identifier shall be used.
Short	Where applicable, the nominal volume can be specified using a numerical value and its unit of measurement The unit of measurement shall be specified in accordance with ISO 11240 and the resulting terminology The symbol and the symbol identifier shall be used
Control	0..1
Type	Quantity
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
66. Extension.extension:externalDiameter
Slice Name	externalDiameter
Definition	R4B: `ProdCharacteristic.externalDiameter` (new:Quantity)
Short	R4B: Where applicable, the external diameter can be specified using a numerical value and its unit of measurement The unit of measurement shall be specified in accordance with ISO 11240 and the resulting terminology The symbol and the symbol identifier shall be used (new)
Comments	Element `ProdCharacteristic.externalDiameter` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.externalDiameter` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension
Requirements	Element `ProdCharacteristic.externalDiameter` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.externalDiameter` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
68. Extension.extension:externalDiameter.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
70. Extension.extension:externalDiameter.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
72. Extension.extension:externalDiameter.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`externalDiameter`
74. Extension.extension:externalDiameter.value[x]
Definition	Where applicable, the external diameter can be specified using a numerical value and its unit of measurement The unit of measurement shall be specified in accordance with ISO 11240 and the resulting terminology The symbol and the symbol identifier shall be used.
Short	Where applicable, the external diameter can be specified using a numerical value and its unit of measurement The unit of measurement shall be specified in accordance with ISO 11240 and the resulting terminology The symbol and the symbol identifier shall be used
Control	0..1
Type	Quantity
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
76. Extension.extension:shape
Slice Name	shape
Definition	R4B: `ProdCharacteristic.shape` (new:string)
Short	R4B: Where applicable, the shape can be specified An appropriate controlled vocabulary shall be used The term and the term identifier shall be used (new)
Comments	Element `ProdCharacteristic.shape` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.shape` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension
Requirements	Element `ProdCharacteristic.shape` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.shape` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
78. Extension.extension:shape.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
80. Extension.extension:shape.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
82. Extension.extension:shape.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`shape`
84. Extension.extension:shape.value[x]
Definition	Where applicable, the shape can be specified An appropriate controlled vocabulary shall be used The term and the term identifier shall be used.
Short	Where applicable, the shape can be specified An appropriate controlled vocabulary shall be used The term and the term identifier shall be used
Control	0..1
Type	string
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
86. Extension.extension:color
Slice Name	color
Definition	R4B: `ProdCharacteristic.color` (new:string)
Short	R4B: Where applicable, the color can be specified An appropriate controlled vocabulary shall be used The term and the term identifier shall be used (new)
Comments	Element `ProdCharacteristic.color` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.color` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension
Requirements	Element `ProdCharacteristic.color` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.color` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
88. Extension.extension:color.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
90. Extension.extension:color.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
92. Extension.extension:color.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`color`
94. Extension.extension:color.value[x]
Definition	Where applicable, the color can be specified An appropriate controlled vocabulary shall be used The term and the term identifier shall be used.
Short	Where applicable, the color can be specified An appropriate controlled vocabulary shall be used The term and the term identifier shall be used
Control	0..1
Type	string
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
96. Extension.extension:imprint
Slice Name	imprint
Definition	R4B: `ProdCharacteristic.imprint` (new:string)
Short	R4B: Where applicable, the imprint can be specified as text (new)
Comments	Element `ProdCharacteristic.imprint` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.imprint` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension
Requirements	Element `ProdCharacteristic.imprint` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.imprint` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
98. Extension.extension:imprint.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
100. Extension.extension:imprint.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
102. Extension.extension:imprint.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`imprint`
104. Extension.extension:imprint.value[x]
Definition	Where applicable, the imprint can be specified as text.
Short	Where applicable, the imprint can be specified as text
Control	0..1
Type	string
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
106. Extension.extension:image
Slice Name	image
Definition	R4B: `ProdCharacteristic.image` (new:Attachment)
Short	R4B: Where applicable, the image can be provided The format of the image attachment shall be specified by regional implementations (new)
Comments	Element `ProdCharacteristic.image` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.image` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension
Requirements	Element `ProdCharacteristic.image` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.image` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
108. Extension.extension:image.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
110. Extension.extension:image.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
112. Extension.extension:image.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`image`
114. Extension.extension:image.value[x]
Definition	Where applicable, the image can be provided The format of the image attachment shall be specified by regional implementations.
Short	Where applicable, the image can be provided The format of the image attachment shall be specified by regional implementations
Control	0..1
Type	Attachment
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
116. Extension.extension:scoring
Slice Name	scoring
Definition	R4B: `ProdCharacteristic.scoring` (new:CodeableConcept)
Short	R4B: Where applicable, the scoring can be specified An appropriate controlled vocabulary shall be used The term and the term identifier shall be used (new)
Comments	Element `ProdCharacteristic.scoring` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.scoring` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension
Requirements	Element `ProdCharacteristic.scoring` is not mapped to FHIR STU3, since FHIR R4B `ProdCharacteristic` is not mapped. Element `ProdCharacteristic.scoring` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
118. Extension.extension:scoring.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
120. Extension.extension:scoring.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
122. Extension.extension:scoring.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`scoring`
124. Extension.extension:scoring.value[x]
Definition	Where applicable, the scoring can be specified An appropriate controlled vocabulary shall be used The term and the term identifier shall be used.
Short	Where applicable, the scoring can be specified An appropriate controlled vocabulary shall be used The term and the term identifier shall be used
Control	0..1
Type	CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
126. Extension.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`http://hl7.org/fhir/4.3/StructureDefinition/extension-DeviceDefinition.physicalCharacteristics`
128. Extension.value[x]
Definition	Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Value of extension
Control	0..0
Type	Choice of: base64Binary, boolean, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, Meta
Primitive Value	This primitive element may be present, or absent, or replaced by an extension