Extensions for Using Data Elements from FHIR R4B in FHIR STU3
0.1.0 - STU International flag

Extensions for Using Data Elements from FHIR R4B in FHIR STU3 - Downloaded Version null See the Directory of published versions

Extension: ExtensionChargeItemDefinition_PropertyGroup - Detailed Descriptions

Page standards status: Trial-use Maturity Level: 0

Definitions for the ext-R4B-ChargeItemDefinition.propertyGroup extension.

Guidance on how to interpret the contents of this table can be foundhere

0. Extension
Definition

R4B: ChargeItemDefinition.propertyGroup (new:BackboneElement)


Optional Extension Element - found in all resources.

ShortR4B: Group of properties which are applicable under the same conditions (new)Optional Extensions Element
Comments

Element ChargeItemDefinition.propertyGroup is not mapped to FHIR STU3, since FHIR R4B ChargeItemDefinition is not mapped. Element ChargeItemDefinition.propertyGroup has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Control0..*
This element is affected by the following invariants: ele-1
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
2. Extension.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional Content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Alternate Namesextensions, user content
SlicingThis element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 4. Extension.extension:applicability
    Slice Nameapplicability
    Definition

    R4B: ChargeItemDefinition.propertyGroup.applicability (new:ChargeItemDefinition.applicability)

    ShortR4B: Conditions under which the priceComponent is applicable (new)Additional Content defined by implementations
    Comments

    Element ChargeItemDefinition.propertyGroup.applicability is part of an existing definition because parent element ChargeItemDefinition.propertyGroup requires a cross-version extension. Element ChargeItemDefinition.propertyGroup.applicability is not mapped to FHIR STU3, since FHIR R4B ChargeItemDefinition is not mapped. Element ChargeItemDefinition.propertyGroup.applicability has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). The applicability conditions can be used to ascertain whether a billing item is allowed in a specific context. E.g. some billing codes may only be applicable in out-patient settings, only to male/female patients or only to children.

    Control0..*
    TypeExtension
    Requirements

    Element ChargeItemDefinition.propertyGroup.applicability is part of an existing definition because parent element ChargeItemDefinition.propertyGroup requires a cross-version extension. Element ChargeItemDefinition.propertyGroup.applicability is not mapped to FHIR STU3, since FHIR R4B ChargeItemDefinition is not mapped. Element ChargeItemDefinition.propertyGroup.applicability has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    6. Extension.extension:applicability.url
    Definition

    Source of the definition for the extension code - a logical name or a URL.

    Shortidentifies the meaning of the extension
    Comments

    The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

    Control1..1
    Typeuri
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    XML FormatIn the XML format, this property is represented as an attribute.
    Fixed Valuehttp://hl7.org/fhir/4.3/StructureDefinition/extension-ChargeItemDefinition.applicability
    8. Extension.extension:applicability.value[x]
    Definition

    Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).

    ShortValue of extension
    Control0..01
    TypeChoice of: base64Binary, boolean, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, Meta
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    10. Extension.extension:priceComponent
    Slice NamepriceComponent
    Definition

    R4B: ChargeItemDefinition.propertyGroup.priceComponent (new:BackboneElement)

    ShortR4B: Components of total line item price (new)Additional Content defined by implementations
    Comments

    Element ChargeItemDefinition.propertyGroup.priceComponent is part of an existing definition because parent element ChargeItemDefinition.propertyGroup requires a cross-version extension. Element ChargeItemDefinition.propertyGroup.priceComponent is not mapped to FHIR STU3, since FHIR R4B ChargeItemDefinition is not mapped. Element ChargeItemDefinition.propertyGroup.priceComponent has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..*
    TypeExtension
    Requirements

    Element ChargeItemDefinition.propertyGroup.priceComponent is part of an existing definition because parent element ChargeItemDefinition.propertyGroup requires a cross-version extension. Element ChargeItemDefinition.propertyGroup.priceComponent is not mapped to FHIR STU3, since FHIR R4B ChargeItemDefinition is not mapped. Element ChargeItemDefinition.propertyGroup.priceComponent has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    12. Extension.extension:priceComponent.extension
    Definition

    An Extension


    May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortExtensionAdditional Content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control10..*
    TypeExtension
    Alternate Namesextensions, user content
    SlicingThis element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • 14. Extension.extension:priceComponent.extension:type
      Slice Nametype
      Definition

      R4B: ChargeItemDefinition.propertyGroup.priceComponent.type (new:code)

      ShortR4B: base | surcharge | deduction | discount | tax | informational (new)Additional Content defined by implementations
      Comments

      Element ChargeItemDefinition.propertyGroup.priceComponent.type is part of an existing definition because parent element ChargeItemDefinition.propertyGroup.priceComponent requires a cross-version extension. Element ChargeItemDefinition.propertyGroup.priceComponent.type is not mapped to FHIR STU3, since FHIR R4B ChargeItemDefinition is not mapped. Element ChargeItemDefinition.propertyGroup.priceComponent.type has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      Control10..1*
      TypeExtension
      Requirements

      Element ChargeItemDefinition.propertyGroup.priceComponent.type is part of an existing definition because parent element ChargeItemDefinition.propertyGroup.priceComponent requires a cross-version extension. Element ChargeItemDefinition.propertyGroup.priceComponent.type is not mapped to FHIR STU3, since FHIR R4B ChargeItemDefinition is not mapped. Element ChargeItemDefinition.propertyGroup.priceComponent.type has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      16. Extension.extension:priceComponent.extension:type.url
      Definition

      Source of the definition for the extension code - a logical name or a URL.

      Shortidentifies the meaning of the extension
      Comments

      The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

      Control1..1
      Typeuri
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      XML FormatIn the XML format, this property is represented as an attribute.
      Fixed Valuetype
      18. Extension.extension:priceComponent.extension:type.value[x]
      Definition

      This code identifies the type of the component.


      Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).

      Shortbase | surcharge | deduction | discount | tax | informationalValue of extension
      Control10..1
      BindingThe codes SHALL be taken from For codes, see R4BInvoicePriceComponentTypeForR3 (0.1.0)
      (required to http://hl7.org/fhir/uv/xver/ValueSet/R4B-invoice-priceComponentType-for-R3|0.1.0)

      Codes indicating the kind of the price component.

      Typecode, date, dateTime, Meta, string, Address, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Quantity, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal, CodeableConcept
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      20. Extension.extension:priceComponent.extension:code
      Slice Namecode
      Definition

      R4B: ChargeItemDefinition.propertyGroup.priceComponent.code (new:CodeableConcept)

      ShortR4B: Code identifying the specific component (new)Additional Content defined by implementations
      Comments

      Element ChargeItemDefinition.propertyGroup.priceComponent.code is part of an existing definition because parent element ChargeItemDefinition.propertyGroup.priceComponent requires a cross-version extension. Element ChargeItemDefinition.propertyGroup.priceComponent.code is not mapped to FHIR STU3, since FHIR R4B ChargeItemDefinition is not mapped. Element ChargeItemDefinition.propertyGroup.priceComponent.code has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      Control0..1*
      TypeExtension
      Requirements

      Element ChargeItemDefinition.propertyGroup.priceComponent.code is part of an existing definition because parent element ChargeItemDefinition.propertyGroup.priceComponent requires a cross-version extension. Element ChargeItemDefinition.propertyGroup.priceComponent.code is not mapped to FHIR STU3, since FHIR R4B ChargeItemDefinition is not mapped. Element ChargeItemDefinition.propertyGroup.priceComponent.code has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      22. Extension.extension:priceComponent.extension:code.url
      Definition

      Source of the definition for the extension code - a logical name or a URL.

      Shortidentifies the meaning of the extension
      Comments

      The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

      Control1..1
      Typeuri
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      XML FormatIn the XML format, this property is represented as an attribute.
      Fixed Valuecode
      24. Extension.extension:priceComponent.extension:code.value[x]
      Definition

      A code that identifies the component. Codes may be used to differentiate between kinds of taxes, surcharges, discounts etc.


      Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).

      ShortCode identifying the specific componentValue of extension
      Control0..1
      TypeCodeableConcept, date, dateTime, Meta, code, string, Address, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Quantity, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      26. Extension.extension:priceComponent.extension:factor
      Slice Namefactor
      Definition

      R4B: ChargeItemDefinition.propertyGroup.priceComponent.factor (new:decimal)

      ShortR4B: Factor used for calculating this component (new)Additional Content defined by implementations
      Comments

      Element ChargeItemDefinition.propertyGroup.priceComponent.factor is part of an existing definition because parent element ChargeItemDefinition.propertyGroup.priceComponent requires a cross-version extension. Element ChargeItemDefinition.propertyGroup.priceComponent.factor is not mapped to FHIR STU3, since FHIR R4B ChargeItemDefinition is not mapped. Element ChargeItemDefinition.propertyGroup.priceComponent.factor has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      Control0..1*
      TypeExtension
      Requirements

      Element ChargeItemDefinition.propertyGroup.priceComponent.factor is part of an existing definition because parent element ChargeItemDefinition.propertyGroup.priceComponent requires a cross-version extension. Element ChargeItemDefinition.propertyGroup.priceComponent.factor is not mapped to FHIR STU3, since FHIR R4B ChargeItemDefinition is not mapped. Element ChargeItemDefinition.propertyGroup.priceComponent.factor has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      28. Extension.extension:priceComponent.extension:factor.url
      Definition

      Source of the definition for the extension code - a logical name or a URL.

      Shortidentifies the meaning of the extension
      Comments

      The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

      Control1..1
      Typeuri
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      XML FormatIn the XML format, this property is represented as an attribute.
      Fixed Valuefactor
      30. Extension.extension:priceComponent.extension:factor.value[x]
      Definition

      The factor that has been applied on the base price for calculating this component.


      Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).

      ShortFactor used for calculating this componentValue of extension
      Control0..1
      Typedecimal, date, dateTime, Meta, code, string, Address, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Quantity, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, CodeableConcept
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      32. Extension.extension:priceComponent.extension:amount
      Slice Nameamount
      Definition

      R4B: ChargeItemDefinition.propertyGroup.priceComponent.amount (new:Money)

      ShortR4B: Monetary amount associated with this component (new)Additional Content defined by implementations
      Comments

      Element ChargeItemDefinition.propertyGroup.priceComponent.amount is part of an existing definition because parent element ChargeItemDefinition.propertyGroup.priceComponent requires a cross-version extension. Element ChargeItemDefinition.propertyGroup.priceComponent.amount is not mapped to FHIR STU3, since FHIR R4B ChargeItemDefinition is not mapped. Element ChargeItemDefinition.propertyGroup.priceComponent.amount has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      Control0..1*
      TypeExtension
      Requirements

      Element ChargeItemDefinition.propertyGroup.priceComponent.amount is part of an existing definition because parent element ChargeItemDefinition.propertyGroup.priceComponent requires a cross-version extension. Element ChargeItemDefinition.propertyGroup.priceComponent.amount is not mapped to FHIR STU3, since FHIR R4B ChargeItemDefinition is not mapped. Element ChargeItemDefinition.propertyGroup.priceComponent.amount has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      34. Extension.extension:priceComponent.extension:amount.url
      Definition

      Source of the definition for the extension code - a logical name or a URL.

      Shortidentifies the meaning of the extension
      Comments

      The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

      Control1..1
      Typeuri
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      XML FormatIn the XML format, this property is represented as an attribute.
      Fixed Valueamount
      36. Extension.extension:priceComponent.extension:amount.value[x]
      Definition

      The amount calculated for this component.


      Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).

      ShortMonetary amount associated with this componentValue of extension
      Control0..1
      TypeMoney, date, dateTime, Meta, code, string, Address, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Quantity, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal, CodeableConcept
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      38. Extension.extension:priceComponent.url
      Definition

      Source of the definition for the extension code - a logical name or a URL.

      Shortidentifies the meaning of the extension
      Comments

      The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

      Control1..1
      Typeuri
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      XML FormatIn the XML format, this property is represented as an attribute.
      Fixed ValuepriceComponent
      40. Extension.extension:priceComponent.value[x]
      Definition

      Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).

      ShortValue of extension
      Control0..01
      TypeChoice of: base64Binary, boolean, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, Meta
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      42. Extension.url
      Definition

      Source of the definition for the extension code - a logical name or a URL.

      Shortidentifies the meaning of the extension
      Comments

      The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

      Control1..1
      Typeuri
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      XML FormatIn the XML format, this property is represented as an attribute.
      Fixed Valuehttp://hl7.org/fhir/4.3/StructureDefinition/extension-ChargeItemDefinition.propertyGroup
      44. Extension.value[x]
      Definition

      Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).

      ShortValue of extension
      Control0..01
      TypeChoice of: base64Binary, boolean, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, Meta
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension

      Guidance on how to interpret the contents of this table can be foundhere

      0. Extension
      Definition

      R4B: ChargeItemDefinition.propertyGroup (new:BackboneElement)

      ShortR4B: Group of properties which are applicable under the same conditions (new)
      Comments

      Element ChargeItemDefinition.propertyGroup is not mapped to FHIR STU3, since FHIR R4B ChargeItemDefinition is not mapped. Element ChargeItemDefinition.propertyGroup has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      Control0..*
      Is Modifierfalse
      2. Extension.extension
      Control0..*
      SlicingThis element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 4. Extension.extension:applicability
        Slice Nameapplicability
        Definition

        R4B: ChargeItemDefinition.propertyGroup.applicability (new:ChargeItemDefinition.applicability)

        ShortR4B: Conditions under which the priceComponent is applicable (new)
        Comments

        Element ChargeItemDefinition.propertyGroup.applicability is part of an existing definition because parent element ChargeItemDefinition.propertyGroup requires a cross-version extension. Element ChargeItemDefinition.propertyGroup.applicability is not mapped to FHIR STU3, since FHIR R4B ChargeItemDefinition is not mapped. Element ChargeItemDefinition.propertyGroup.applicability has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). The applicability conditions can be used to ascertain whether a billing item is allowed in a specific context. E.g. some billing codes may only be applicable in out-patient settings, only to male/female patients or only to children.

        Control0..*
        Requirements

        Element ChargeItemDefinition.propertyGroup.applicability is part of an existing definition because parent element ChargeItemDefinition.propertyGroup requires a cross-version extension. Element ChargeItemDefinition.propertyGroup.applicability is not mapped to FHIR STU3, since FHIR R4B ChargeItemDefinition is not mapped. Element ChargeItemDefinition.propertyGroup.applicability has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        6. Extension.extension:applicability.url
        Control1..1
        Fixed Valuehttp://hl7.org/fhir/4.3/StructureDefinition/extension-ChargeItemDefinition.applicability
        8. Extension.extension:applicability.value[x]
        Control0..0
        10. Extension.extension:priceComponent
        Slice NamepriceComponent
        Definition

        R4B: ChargeItemDefinition.propertyGroup.priceComponent (new:BackboneElement)

        ShortR4B: Components of total line item price (new)
        Comments

        Element ChargeItemDefinition.propertyGroup.priceComponent is part of an existing definition because parent element ChargeItemDefinition.propertyGroup requires a cross-version extension. Element ChargeItemDefinition.propertyGroup.priceComponent is not mapped to FHIR STU3, since FHIR R4B ChargeItemDefinition is not mapped. Element ChargeItemDefinition.propertyGroup.priceComponent has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..*
        Requirements

        Element ChargeItemDefinition.propertyGroup.priceComponent is part of an existing definition because parent element ChargeItemDefinition.propertyGroup requires a cross-version extension. Element ChargeItemDefinition.propertyGroup.priceComponent is not mapped to FHIR STU3, since FHIR R4B ChargeItemDefinition is not mapped. Element ChargeItemDefinition.propertyGroup.priceComponent has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        12. Extension.extension:priceComponent.extension
        Control1..*
        SlicingThis element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 14. Extension.extension:priceComponent.extension:type
          Slice Nametype
          Definition

          R4B: ChargeItemDefinition.propertyGroup.priceComponent.type (new:code)

          ShortR4B: base | surcharge | deduction | discount | tax | informational (new)
          Comments

          Element ChargeItemDefinition.propertyGroup.priceComponent.type is part of an existing definition because parent element ChargeItemDefinition.propertyGroup.priceComponent requires a cross-version extension. Element ChargeItemDefinition.propertyGroup.priceComponent.type is not mapped to FHIR STU3, since FHIR R4B ChargeItemDefinition is not mapped. Element ChargeItemDefinition.propertyGroup.priceComponent.type has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

          Control1..1
          Requirements

          Element ChargeItemDefinition.propertyGroup.priceComponent.type is part of an existing definition because parent element ChargeItemDefinition.propertyGroup.priceComponent requires a cross-version extension. Element ChargeItemDefinition.propertyGroup.priceComponent.type is not mapped to FHIR STU3, since FHIR R4B ChargeItemDefinition is not mapped. Element ChargeItemDefinition.propertyGroup.priceComponent.type has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

          16. Extension.extension:priceComponent.extension:type.url
          Control1..1
          Fixed Valuetype
          18. Extension.extension:priceComponent.extension:type.value[x]
          Definition

          This code identifies the type of the component.

          Shortbase | surcharge | deduction | discount | tax | informational
          Control1..1
          BindingThe codes SHALL be taken from R4BInvoicePriceComponentTypeForR3 (0.1.0)
          (required to http://hl7.org/fhir/uv/xver/ValueSet/R4B-invoice-priceComponentType-for-R3|0.1.0)

          Codes indicating the kind of the price component.

          Typecode
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          20. Extension.extension:priceComponent.extension:code
          Slice Namecode
          Definition

          R4B: ChargeItemDefinition.propertyGroup.priceComponent.code (new:CodeableConcept)

          ShortR4B: Code identifying the specific component (new)
          Comments

          Element ChargeItemDefinition.propertyGroup.priceComponent.code is part of an existing definition because parent element ChargeItemDefinition.propertyGroup.priceComponent requires a cross-version extension. Element ChargeItemDefinition.propertyGroup.priceComponent.code is not mapped to FHIR STU3, since FHIR R4B ChargeItemDefinition is not mapped. Element ChargeItemDefinition.propertyGroup.priceComponent.code has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

          Control0..1
          Requirements

          Element ChargeItemDefinition.propertyGroup.priceComponent.code is part of an existing definition because parent element ChargeItemDefinition.propertyGroup.priceComponent requires a cross-version extension. Element ChargeItemDefinition.propertyGroup.priceComponent.code is not mapped to FHIR STU3, since FHIR R4B ChargeItemDefinition is not mapped. Element ChargeItemDefinition.propertyGroup.priceComponent.code has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

          22. Extension.extension:priceComponent.extension:code.url
          Control1..1
          Fixed Valuecode
          24. Extension.extension:priceComponent.extension:code.value[x]
          Definition

          A code that identifies the component. Codes may be used to differentiate between kinds of taxes, surcharges, discounts etc.

          ShortCode identifying the specific component
          Control0..1
          TypeCodeableConcept
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          26. Extension.extension:priceComponent.extension:factor
          Slice Namefactor
          Definition

          R4B: ChargeItemDefinition.propertyGroup.priceComponent.factor (new:decimal)

          ShortR4B: Factor used for calculating this component (new)
          Comments

          Element ChargeItemDefinition.propertyGroup.priceComponent.factor is part of an existing definition because parent element ChargeItemDefinition.propertyGroup.priceComponent requires a cross-version extension. Element ChargeItemDefinition.propertyGroup.priceComponent.factor is not mapped to FHIR STU3, since FHIR R4B ChargeItemDefinition is not mapped. Element ChargeItemDefinition.propertyGroup.priceComponent.factor has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

          Control0..1
          Requirements

          Element ChargeItemDefinition.propertyGroup.priceComponent.factor is part of an existing definition because parent element ChargeItemDefinition.propertyGroup.priceComponent requires a cross-version extension. Element ChargeItemDefinition.propertyGroup.priceComponent.factor is not mapped to FHIR STU3, since FHIR R4B ChargeItemDefinition is not mapped. Element ChargeItemDefinition.propertyGroup.priceComponent.factor has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

          28. Extension.extension:priceComponent.extension:factor.url
          Control1..1
          Fixed Valuefactor
          30. Extension.extension:priceComponent.extension:factor.value[x]
          Definition

          The factor that has been applied on the base price for calculating this component.

          ShortFactor used for calculating this component
          Control0..1
          Typedecimal
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          32. Extension.extension:priceComponent.extension:amount
          Slice Nameamount
          Definition

          R4B: ChargeItemDefinition.propertyGroup.priceComponent.amount (new:Money)

          ShortR4B: Monetary amount associated with this component (new)
          Comments

          Element ChargeItemDefinition.propertyGroup.priceComponent.amount is part of an existing definition because parent element ChargeItemDefinition.propertyGroup.priceComponent requires a cross-version extension. Element ChargeItemDefinition.propertyGroup.priceComponent.amount is not mapped to FHIR STU3, since FHIR R4B ChargeItemDefinition is not mapped. Element ChargeItemDefinition.propertyGroup.priceComponent.amount has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

          Control0..1
          Requirements

          Element ChargeItemDefinition.propertyGroup.priceComponent.amount is part of an existing definition because parent element ChargeItemDefinition.propertyGroup.priceComponent requires a cross-version extension. Element ChargeItemDefinition.propertyGroup.priceComponent.amount is not mapped to FHIR STU3, since FHIR R4B ChargeItemDefinition is not mapped. Element ChargeItemDefinition.propertyGroup.priceComponent.amount has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

          34. Extension.extension:priceComponent.extension:amount.url
          Control1..1
          Fixed Valueamount
          36. Extension.extension:priceComponent.extension:amount.value[x]
          Definition

          The amount calculated for this component.

          ShortMonetary amount associated with this component
          Control0..1
          TypeMoney
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          38. Extension.extension:priceComponent.url
          Control1..1
          Fixed ValuepriceComponent
          40. Extension.extension:priceComponent.value[x]
          Control0..0
          42. Extension.url
          Control1..1
          Fixed Valuehttp://hl7.org/fhir/4.3/StructureDefinition/extension-ChargeItemDefinition.propertyGroup
          44. Extension.value[x]
          Control0..0

          Guidance on how to interpret the contents of this table can be foundhere

          0. Extension
          Definition

          R4B: ChargeItemDefinition.propertyGroup (new:BackboneElement)

          ShortR4B: Group of properties which are applicable under the same conditions (new)
          Comments

          Element ChargeItemDefinition.propertyGroup is not mapped to FHIR STU3, since FHIR R4B ChargeItemDefinition is not mapped. Element ChargeItemDefinition.propertyGroup has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

          Control0..*
          This element is affected by the following invariants: ele-1
          Is Modifierfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          2. Extension.id
          Definition

          unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          Shortxml:id (or equivalent in JSON)
          Control0..1
          Typestring
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          XML FormatIn the XML format, this property is represented as an attribute.
          4. Extension.extension
          Definition

          An Extension

          ShortExtension
          Control0..*
          TypeExtension
          SlicingThis element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ url
          • 6. Extension.extension:applicability
            Slice Nameapplicability
            Definition

            R4B: ChargeItemDefinition.propertyGroup.applicability (new:ChargeItemDefinition.applicability)

            ShortR4B: Conditions under which the priceComponent is applicable (new)
            Comments

            Element ChargeItemDefinition.propertyGroup.applicability is part of an existing definition because parent element ChargeItemDefinition.propertyGroup requires a cross-version extension. Element ChargeItemDefinition.propertyGroup.applicability is not mapped to FHIR STU3, since FHIR R4B ChargeItemDefinition is not mapped. Element ChargeItemDefinition.propertyGroup.applicability has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). The applicability conditions can be used to ascertain whether a billing item is allowed in a specific context. E.g. some billing codes may only be applicable in out-patient settings, only to male/female patients or only to children.

            Control0..*
            TypeExtension
            Requirements

            Element ChargeItemDefinition.propertyGroup.applicability is part of an existing definition because parent element ChargeItemDefinition.propertyGroup requires a cross-version extension. Element ChargeItemDefinition.propertyGroup.applicability is not mapped to FHIR STU3, since FHIR R4B ChargeItemDefinition is not mapped. Element ChargeItemDefinition.propertyGroup.applicability has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

            8. Extension.extension:applicability.id
            Definition

            unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            Shortxml:id (or equivalent in JSON)
            Control0..1
            Typestring
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            XML FormatIn the XML format, this property is represented as an attribute.
            10. Extension.extension:applicability.extension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            ShortAdditional Content defined by implementations
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Alternate Namesextensions, user content
            SlicingThis element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • value @ url
            • 12. Extension.extension:applicability.url
              Definition

              Source of the definition for the extension code - a logical name or a URL.

              Shortidentifies the meaning of the extension
              Comments

              The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

              Control1..1
              Typeuri
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              XML FormatIn the XML format, this property is represented as an attribute.
              Fixed Valuehttp://hl7.org/fhir/4.3/StructureDefinition/extension-ChargeItemDefinition.applicability
              14. Extension.extension:applicability.value[x]
              Definition

              Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).

              ShortValue of extension
              Control0..0
              TypeChoice of: base64Binary, boolean, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, Meta
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              16. Extension.extension:priceComponent
              Slice NamepriceComponent
              Definition

              R4B: ChargeItemDefinition.propertyGroup.priceComponent (new:BackboneElement)

              ShortR4B: Components of total line item price (new)
              Comments

              Element ChargeItemDefinition.propertyGroup.priceComponent is part of an existing definition because parent element ChargeItemDefinition.propertyGroup requires a cross-version extension. Element ChargeItemDefinition.propertyGroup.priceComponent is not mapped to FHIR STU3, since FHIR R4B ChargeItemDefinition is not mapped. Element ChargeItemDefinition.propertyGroup.priceComponent has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

              Control0..*
              TypeExtension
              Requirements

              Element ChargeItemDefinition.propertyGroup.priceComponent is part of an existing definition because parent element ChargeItemDefinition.propertyGroup requires a cross-version extension. Element ChargeItemDefinition.propertyGroup.priceComponent is not mapped to FHIR STU3, since FHIR R4B ChargeItemDefinition is not mapped. Element ChargeItemDefinition.propertyGroup.priceComponent has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

              18. Extension.extension:priceComponent.id
              Definition

              unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              Shortxml:id (or equivalent in JSON)
              Control0..1
              Typestring
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              XML FormatIn the XML format, this property is represented as an attribute.
              20. Extension.extension:priceComponent.extension
              Definition

              An Extension

              ShortExtension
              Control1..*
              TypeExtension
              SlicingThis element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
              • value @ url
              • 22. Extension.extension:priceComponent.extension:type
                Slice Nametype
                Definition

                R4B: ChargeItemDefinition.propertyGroup.priceComponent.type (new:code)

                ShortR4B: base | surcharge | deduction | discount | tax | informational (new)
                Comments

                Element ChargeItemDefinition.propertyGroup.priceComponent.type is part of an existing definition because parent element ChargeItemDefinition.propertyGroup.priceComponent requires a cross-version extension. Element ChargeItemDefinition.propertyGroup.priceComponent.type is not mapped to FHIR STU3, since FHIR R4B ChargeItemDefinition is not mapped. Element ChargeItemDefinition.propertyGroup.priceComponent.type has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

                Control1..1
                TypeExtension
                Requirements

                Element ChargeItemDefinition.propertyGroup.priceComponent.type is part of an existing definition because parent element ChargeItemDefinition.propertyGroup.priceComponent requires a cross-version extension. Element ChargeItemDefinition.propertyGroup.priceComponent.type is not mapped to FHIR STU3, since FHIR R4B ChargeItemDefinition is not mapped. Element ChargeItemDefinition.propertyGroup.priceComponent.type has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

                24. Extension.extension:priceComponent.extension:type.id
                Definition

                unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                Shortxml:id (or equivalent in JSON)
                Control0..1
                Typestring
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                XML FormatIn the XML format, this property is represented as an attribute.
                26. Extension.extension:priceComponent.extension:type.extension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                ShortAdditional Content defined by implementations
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Alternate Namesextensions, user content
                SlicingThis element introduces a set of slices on Extension.extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                • value @ url
                • 28. Extension.extension:priceComponent.extension:type.url
                  Definition

                  Source of the definition for the extension code - a logical name or a URL.

                  Shortidentifies the meaning of the extension
                  Comments

                  The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

                  Control1..1
                  Typeuri
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  XML FormatIn the XML format, this property is represented as an attribute.
                  Fixed Valuetype
                  30. Extension.extension:priceComponent.extension:type.value[x]
                  Definition

                  This code identifies the type of the component.

                  Shortbase | surcharge | deduction | discount | tax | informational
                  Control1..1
                  BindingThe codes SHALL be taken from R4BInvoicePriceComponentTypeForR3 (0.1.0)
                  (required to http://hl7.org/fhir/uv/xver/ValueSet/R4B-invoice-priceComponentType-for-R3|0.1.0)

                  Codes indicating the kind of the price component.

                  Typecode
                  [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  32. Extension.extension:priceComponent.extension:code
                  Slice Namecode
                  Definition

                  R4B: ChargeItemDefinition.propertyGroup.priceComponent.code (new:CodeableConcept)

                  ShortR4B: Code identifying the specific component (new)
                  Comments

                  Element ChargeItemDefinition.propertyGroup.priceComponent.code is part of an existing definition because parent element ChargeItemDefinition.propertyGroup.priceComponent requires a cross-version extension. Element ChargeItemDefinition.propertyGroup.priceComponent.code is not mapped to FHIR STU3, since FHIR R4B ChargeItemDefinition is not mapped. Element ChargeItemDefinition.propertyGroup.priceComponent.code has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

                  Control0..1
                  TypeExtension
                  Requirements

                  Element ChargeItemDefinition.propertyGroup.priceComponent.code is part of an existing definition because parent element ChargeItemDefinition.propertyGroup.priceComponent requires a cross-version extension. Element ChargeItemDefinition.propertyGroup.priceComponent.code is not mapped to FHIR STU3, since FHIR R4B ChargeItemDefinition is not mapped. Element ChargeItemDefinition.propertyGroup.priceComponent.code has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

                  34. Extension.extension:priceComponent.extension:code.id
                  Definition

                  unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                  Shortxml:id (or equivalent in JSON)
                  Control0..1
                  Typestring
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  XML FormatIn the XML format, this property is represented as an attribute.
                  36. Extension.extension:priceComponent.extension:code.extension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                  ShortAdditional Content defined by implementations
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Alternate Namesextensions, user content
                  SlicingThis element introduces a set of slices on Extension.extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                  • value @ url
                  • 38. Extension.extension:priceComponent.extension:code.url
                    Definition

                    Source of the definition for the extension code - a logical name or a URL.

                    Shortidentifies the meaning of the extension
                    Comments

                    The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

                    Control1..1
                    Typeuri
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    XML FormatIn the XML format, this property is represented as an attribute.
                    Fixed Valuecode
                    40. Extension.extension:priceComponent.extension:code.value[x]
                    Definition

                    A code that identifies the component. Codes may be used to differentiate between kinds of taxes, surcharges, discounts etc.

                    ShortCode identifying the specific component
                    Control0..1
                    TypeCodeableConcept
                    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                    42. Extension.extension:priceComponent.extension:factor
                    Slice Namefactor
                    Definition

                    R4B: ChargeItemDefinition.propertyGroup.priceComponent.factor (new:decimal)

                    ShortR4B: Factor used for calculating this component (new)
                    Comments

                    Element ChargeItemDefinition.propertyGroup.priceComponent.factor is part of an existing definition because parent element ChargeItemDefinition.propertyGroup.priceComponent requires a cross-version extension. Element ChargeItemDefinition.propertyGroup.priceComponent.factor is not mapped to FHIR STU3, since FHIR R4B ChargeItemDefinition is not mapped. Element ChargeItemDefinition.propertyGroup.priceComponent.factor has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

                    Control0..1
                    TypeExtension
                    Requirements

                    Element ChargeItemDefinition.propertyGroup.priceComponent.factor is part of an existing definition because parent element ChargeItemDefinition.propertyGroup.priceComponent requires a cross-version extension. Element ChargeItemDefinition.propertyGroup.priceComponent.factor is not mapped to FHIR STU3, since FHIR R4B ChargeItemDefinition is not mapped. Element ChargeItemDefinition.propertyGroup.priceComponent.factor has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

                    44. Extension.extension:priceComponent.extension:factor.id
                    Definition

                    unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                    Shortxml:id (or equivalent in JSON)
                    Control0..1
                    Typestring
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    XML FormatIn the XML format, this property is represented as an attribute.
                    46. Extension.extension:priceComponent.extension:factor.extension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                    ShortAdditional Content defined by implementations
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Alternate Namesextensions, user content
                    SlicingThis element introduces a set of slices on Extension.extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                    • value @ url
                    • 48. Extension.extension:priceComponent.extension:factor.url
                      Definition

                      Source of the definition for the extension code - a logical name or a URL.

                      Shortidentifies the meaning of the extension
                      Comments

                      The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

                      Control1..1
                      Typeuri
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      XML FormatIn the XML format, this property is represented as an attribute.
                      Fixed Valuefactor
                      50. Extension.extension:priceComponent.extension:factor.value[x]
                      Definition

                      The factor that has been applied on the base price for calculating this component.

                      ShortFactor used for calculating this component
                      Control0..1
                      Typedecimal
                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      52. Extension.extension:priceComponent.extension:amount
                      Slice Nameamount
                      Definition

                      R4B: ChargeItemDefinition.propertyGroup.priceComponent.amount (new:Money)

                      ShortR4B: Monetary amount associated with this component (new)
                      Comments

                      Element ChargeItemDefinition.propertyGroup.priceComponent.amount is part of an existing definition because parent element ChargeItemDefinition.propertyGroup.priceComponent requires a cross-version extension. Element ChargeItemDefinition.propertyGroup.priceComponent.amount is not mapped to FHIR STU3, since FHIR R4B ChargeItemDefinition is not mapped. Element ChargeItemDefinition.propertyGroup.priceComponent.amount has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

                      Control0..1
                      TypeExtension
                      Requirements

                      Element ChargeItemDefinition.propertyGroup.priceComponent.amount is part of an existing definition because parent element ChargeItemDefinition.propertyGroup.priceComponent requires a cross-version extension. Element ChargeItemDefinition.propertyGroup.priceComponent.amount is not mapped to FHIR STU3, since FHIR R4B ChargeItemDefinition is not mapped. Element ChargeItemDefinition.propertyGroup.priceComponent.amount has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

                      54. Extension.extension:priceComponent.extension:amount.id
                      Definition

                      unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                      Shortxml:id (or equivalent in JSON)
                      Control0..1
                      Typestring
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      XML FormatIn the XML format, this property is represented as an attribute.
                      56. Extension.extension:priceComponent.extension:amount.extension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                      ShortAdditional Content defined by implementations
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      TypeExtension
                      Alternate Namesextensions, user content
                      SlicingThis element introduces a set of slices on Extension.extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                      • value @ url
                      • 58. Extension.extension:priceComponent.extension:amount.url
                        Definition

                        Source of the definition for the extension code - a logical name or a URL.

                        Shortidentifies the meaning of the extension
                        Comments

                        The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

                        Control1..1
                        Typeuri
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        XML FormatIn the XML format, this property is represented as an attribute.
                        Fixed Valueamount
                        60. Extension.extension:priceComponent.extension:amount.value[x]
                        Definition

                        The amount calculated for this component.

                        ShortMonetary amount associated with this component
                        Control0..1
                        TypeMoney
                        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                        62. Extension.extension:priceComponent.url
                        Definition

                        Source of the definition for the extension code - a logical name or a URL.

                        Shortidentifies the meaning of the extension
                        Comments

                        The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

                        Control1..1
                        Typeuri
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        XML FormatIn the XML format, this property is represented as an attribute.
                        Fixed ValuepriceComponent
                        64. Extension.extension:priceComponent.value[x]
                        Definition

                        Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).

                        ShortValue of extension
                        Control0..0
                        TypeChoice of: base64Binary, boolean, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, Meta
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        66. Extension.url
                        Definition

                        Source of the definition for the extension code - a logical name or a URL.

                        Shortidentifies the meaning of the extension
                        Comments

                        The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

                        Control1..1
                        Typeuri
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        XML FormatIn the XML format, this property is represented as an attribute.
                        Fixed Valuehttp://hl7.org/fhir/4.3/StructureDefinition/extension-ChargeItemDefinition.propertyGroup
                        68. Extension.value[x]
                        Definition

                        Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).

                        ShortValue of extension
                        Control0..0
                        TypeChoice of: base64Binary, boolean, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, Meta
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension