R4B-TestScript-element-map-to-R3
type: ConceptMap
node role: treeRoot
id:
  v: R4B-TestScript-element-map-to-R3
text:
  status:
    v: generated
  div:
    v: Generated Narrative: ConceptMap R4B-TestScript-element-map-to-R3 Mapping from http://hl7.org/fhir/4.3 to http://hl7.org/fhir/3.0 Group 1 Mapping from http://hl7.org/fhir/StructureDefinition/TestScript|4.3.0 to http://hl7.org/fhir/StructureDefinition/TestScript|3.0.2 Source Code Relationship Target Code Comment TestScript.meta (meta) maps to wider concept TestScript.meta Element `TestScript.meta` is mapped to FHIR STU3 element `TestScript.meta` as `SourceIsBroaderThanTarget`. The mappings for `TestScript.meta` do not cover the following types: Meta. The mappings for `TestScript.meta` do not cover the following types based on type expansion: lastUpdated, profile, security, source, tag, versionId. TestScript.implicitRules (implicitRules) is equivalent to TestScript.implicitRules Element `TestScript.implicitRules` is mapped to FHIR STU3 element `TestScript.implicitRules` as `Equivalent`. Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. TestScript.language (language) is equivalent to TestScript.language Element `TestScript.language` is mapped to FHIR STU3 element `TestScript.language` as `Equivalent`. Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content ha…
extension:
  url:
    v: http://hl7.org/fhir/StructureDefinition/structuredefinition-wg
    l: structuredefinition-wg
  value: Code
    v: fhir
extension:
  url:
    v: http://hl7.org/fhir/StructureDefinition/structuredefinition-fmm
    l: structuredefinition-fmm
  value: Integer
    v: 0
    extension:
      url:
        v: http://hl7.org/fhir/StructureDefinition/structuredefinition-conformance-derivedFrom
        l: structuredefinition-conformance-derivedFrom
      value: Uri
        v: http://hl7.org/fhir/uv/xver/ImplementationGuide/hl7.fhir.uv.xver-r4b.r3
        l: hl7.fhir.uv.xver-r4b.r3
extension:
  url:
    v: http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status
    l: structuredefinition-standards-status
  value: Code
    v: trial-use
    extension:
      url:
        v: http://hl7.org/fhir/StructureDefinition/structuredefinition-conformance-derivedFrom
        l: structuredefinition-conformance-derivedFrom
      value: Uri
        v: http://hl7.org/fhir/uv/xver/ImplementationGuide/hl7.fhir.uv.xver-r4b.r3
        l: hl7.fhir.uv.xver-r4b.r3
url:
  v: http://hl7.org/fhir/uv/xver/ConceptMap/R4B-TestScript-element-map-to-R3
  l: R4B-TestScript-element-map-to-R3
version:
  v: 0.1.0
name:
  v: R4BTestScriptElementMapToR3
title:
  v: Cross-version mapping for FHIR R4B TestScript to FHIR STU3 TestScript
status:
  v: active
experimental:
  v: false
date:
  v: 2026-03-17T16:04:26.1676387-05:00
contact:
  name:
    v: FHIR Infrastructure
  telecom:
    system:
      v: url
    value:
      v: http://www.hl7.org/Special/committees/fiwg
description:
  v: This ConceptMap represents cross-version mappings for elements from a FHIR R4B TestScript to FHIR STU3.
jurisdiction:
  coding:
    system:
      v: http://unstats.un.org/unsd/methods/m49/m49.htm
      l: m49.htm
    code:
      v: 001
    display:
      v: World
source: Uri
  v: http://hl7.org/fhir/4.3
  l: http://hl7.org/fhir/4.3
target: Uri
  v: http://hl7.org/fhir/3.0
  l: http://hl7.org/fhir/3.0
group:
  source:
    v: http://hl7.org/fhir/StructureDefinition/TestScript
    l: TestScript
  source version:
    v: 4.3.0
  target:
    v: http://hl7.org/fhir/StructureDefinition/TestScript
    l: TestScript
  target version:
    v: 3.0.2
  element:
    code:
      v: TestScript.meta
    display:
      v: meta
    target:
      modifier extension:
        value: Code
      code:
        v: TestScript.meta
      display:
        v: TestScript.meta
      equivalence:
        v: wider
      comment:
        v: Element `TestScript.meta` is mapped to FHIR STU3 element `TestScript.meta` as `SourceIsBroaderThanTarget`. The mappings for `TestScript.meta` do not cover the following types: Meta. The mappings for `TestScript.meta` do not cover the following types based on type expansion: lastUpdated, profile, security, source, tag, versionId.
  element:
    code:
      v: TestScript.implicitRules
    display:
      v: implicitRules
    target:
      modifier extension:
        value: Code
      code:
        v: TestScript.implicitRules
      display:
        v: TestScript.implicitRules
      equivalence:
        v: equivalent
      comment:
        v: Element `TestScript.implicitRules` is mapped to FHIR STU3 element `TestScript.implicitRules` as `Equivalent`. Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.
  element:
    code:
      v: TestScript.language
    display:
      v: language
    target:
      modifier extension:
        value: Code
      code:
        v: TestScript.language
      display:
        v: TestScript.language
      equivalence:
        v: equivalent
      comment:
        v: Element `TestScript.language` is mapped to FHIR STU3 element `TestScript.language` as `Equivalent`. Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).
  element:
    code:
      v: TestScript.text
    display:
      v: text
    target:
      modifier extension:
        value: Code
      code:
        v: TestScript.text
      display:
        v: TestScript.text
      equivalence:
        v: wider
      comment:
        v: Element `TestScript.text` is mapped to FHIR STU3 element `TestScript.text` as `SourceIsBroaderThanTarget`. The mappings for `TestScript.text` do not cover the following types: Narrative. The mappings for `TestScript.text` do not cover the following types based on type expansion: div, status. Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.
  element:
    code:
      v: TestScript.contained
    display:
      v: contained
    target:
      modifier extension:
        value: Code
      code:
        v: TestScript.contained
      display:
        v: TestScript.contained
      equivalence:
        v: equivalent
      comment:
        v: Element `TestScript.contained` is mapped to FHIR STU3 element `TestScript.contained` as `SourceIsBroaderThanTarget`. This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.
  element:
    code:
      v: TestScript.url
    display:
      v: url
    target:
      modifier extension:
        value: Code
      code:
        v: TestScript.url
      display:
        v: TestScript.url
      equivalence:
        v: equivalent
      comment:
        v: Element `TestScript.url` is mapped to FHIR STU3 element `TestScript.url` as `Equivalent`. Can be a urn:uuid: or a urn:oid: but real http: addresses are preferred. Multiple instances may share the same URL if they have a distinct version. The determination of when to create a new version of a resource (same url, new version) vs. defining a new artifact is up to the author. Considerations for making this decision are found in [Technical and Business Versions](https://hl7.org/fhir/resource..html#versions). In some cases, the resource can no longer be found at the stated url, but the url itself cannot change. Implementations can use the [meta.source](https://hl7.org/fhir/resou.html#meta) element to indicate where the current master source of the resource can be found.
  element:
    code:
      v: TestScript.identifier
    display:
      v: identifier
    target:
      modifier extension:
        value: Code
      code:
        v: TestScript.identifier
      display:
        v: TestScript.identifier
      equivalence:
        v: wider
      comment:
        v: Element `TestScript.identifier` is mapped to FHIR STU3 element `TestScript.identifier` as `SourceIsBroaderThanTarget`. The mappings for `TestScript.identifier` do not cover the following types: Identifier. The mappings for `TestScript.identifier` do not cover the following types based on type expansion: assigner, period, system, type, use, value. Typically, this is used for identifiers that can go in an HL7 V3 II (instance identifier) data type, and can then identify this test script outside of FHIR, where it is not possible to use the logical URI.

Code
v: wider

Code
v: equivalent

Code
v: equivalent

Code
v: wider

Code
v: equivalent

Code
v: equivalent

Code
v: wider

code:
  v: TestScript.version
display:
  v: version
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.version
  display:
    v: TestScript.version
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.version` is mapped to FHIR STU3 element `TestScript.version` as `Equivalent`. There may be different test script instances that have the same identifier but different versions. The version can be appended to the url in a reference to allow a reference to a particular business version of the test script with the format [url]|[version].

code:
  v: TestScript.name
display:
  v: name
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.name
  display:
    v: TestScript.name
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.name` is mapped to FHIR STU3 element `TestScript.name` as `Equivalent`. The name is not expected to be globally unique. The name should be a simple alphanumeric type name to ensure that it is machine-processing friendly.

code:
  v: TestScript.title
display:
  v: title
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.title
  display:
    v: TestScript.title
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.title` is mapped to FHIR STU3 element `TestScript.title` as `Equivalent`. This name does not need to be machine-processing friendly and may contain punctuation, white-space, etc.

code:
  v: TestScript.status
display:
  v: status
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.status
  display:
    v: TestScript.status
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.status` is mapped to FHIR STU3 element `TestScript.status` as `Equivalent`. Allows filtering of test scripts that are appropriate for use versus not.

code:
  v: TestScript.experimental
display:
  v: experimental
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.experimental
  display:
    v: TestScript.experimental
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.experimental` is mapped to FHIR STU3 element `TestScript.experimental` as `Equivalent`. Allows filtering of test scripts that are appropriate for use versus not.

code:
  v: TestScript.date
display:
  v: date
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.date
  display:
    v: TestScript.date
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.date` is mapped to FHIR STU3 element `TestScript.date` as `Equivalent`. Note that this is not the same as the resource last-modified-date, since the resource may be a secondary representation of the test script. Additional specific dates may be added as extensions or be found by consulting Provenances associated with past versions of the resource.

code:
  v: TestScript.publisher
display:
  v: publisher
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.publisher
  display:
    v: TestScript.publisher
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.publisher` is mapped to FHIR STU3 element `TestScript.publisher` as `Equivalent`. Usually an organization but may be an individual. The publisher (or steward) of the test script is the organization or individual primarily responsible for the maintenance and upkeep of the test script. This is not necessarily the same individual or organization that developed and initially authored the content. The publisher is the primary point of contact for questions or issues with the test script. This item SHOULD be populated unless the information is available from context.

code:
  v: TestScript.contact
display:
  v: contact
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: wider
  code:
    v: TestScript.contact
  display:
    v: TestScript.contact
  equivalence:
    v: wider
  comment:
    v: Element `TestScript.contact` is mapped to FHIR STU3 element `TestScript.contact` as `SourceIsBroaderThanTarget`. The mappings for `TestScript.contact` do not cover the following types: ContactDetail. The mappings for `TestScript.contact` do not cover the following types based on type expansion: name, telecom. May be a web site, an email address, a telephone number, etc.

code:
  v: TestScript.description
display:
  v: description
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.description
  display:
    v: TestScript.description
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.description` is mapped to FHIR STU3 element `TestScript.description` as `Equivalent`. This description can be used to capture details such as why the test script was built, comments about misuse, instructions for clinical use and interpretation, literature references, examples from the paper world, etc. It is not a rendering of the test script as conveyed in the 'text' field of the resource itself. This item SHOULD be populated unless the information is available from context (e.g. the language of the test script is presumed to be the predominant language in the place the test script was created).

code:
  v: TestScript.useContext
display:
  v: useContext
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: wider
  code:
    v: TestScript.useContext
  display:
    v: TestScript.useContext
  equivalence:
    v: wider
  comment:
    v: Element `TestScript.useContext` is mapped to FHIR STU3 element `TestScript.useContext` as `SourceIsBroaderThanTarget`. The mappings for `TestScript.useContext` do not cover the following types: UsageContext. The mappings for `TestScript.useContext` do not cover the following types based on type expansion: code, value[x]. When multiple useContexts are specified, there is no expectation that all or any of the contexts apply.

code:
  v: TestScript.jurisdiction
display:
  v: jurisdiction
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.jurisdiction
  display:
    v: TestScript.jurisdiction
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.jurisdiction` is mapped to FHIR STU3 element `TestScript.jurisdiction` as `Equivalent`. It may be possible for the test script to be used in jurisdictions other than those for which it was originally designed or intended.

code:
  v: TestScript.purpose
display:
  v: purpose
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.purpose
  display:
    v: TestScript.purpose
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.purpose` is mapped to FHIR STU3 element `TestScript.purpose` as `Equivalent`. This element does not describe the usage of the test script. Instead, it provides traceability of ''why'' the resource is either needed or ''why'' it is defined as it is. This may be used to point to source materials or specifications that drove the structure of this test script.

code:
  v: TestScript.copyright
display:
  v: copyright
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.copyright
  display:
    v: TestScript.copyright
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.copyright` is mapped to FHIR STU3 element `TestScript.copyright` as `Equivalent`.

code:
  v: TestScript.origin
display:
  v: origin
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: wider
  code:
    v: TestScript.origin
  display:
    v: TestScript.origin
  equivalence:
    v: wider
  comment:
    v: Element `TestScript.origin` is mapped to FHIR STU3 element `TestScript.origin` as `Equivalent`. The purpose of this element is to define the profile of an origin element used elsewhere in the script. Test engines could then use the origin-profile mapping to offer a filtered list of test systems that can serve as the sender for the interaction.

code:
  v: TestScript.origin.index
display:
  v: index
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.origin.index
  display:
    v: TestScript.origin.index
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.origin.index` is mapped to FHIR STU3 element `TestScript.origin.index` as `Equivalent`. A given origin index (e.g. 1) can appear only once in the list (e.g. Origin 1 cannot be specified twice ... once as FormFiller and again as FormProcessor within the same script as that could get confusing during test configuration). Different origin indices could play the same actor in the same test script (e.g. You could have two different test systems acting as Form-Filler). The origin indices provided elsewhere in the test script must be one of these origin indices.

code:
  v: TestScript.origin.profile
display:
  v: profile
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.origin.profile
  display:
    v: TestScript.origin.profile
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.origin.profile` is mapped to FHIR STU3 element `TestScript.origin.profile` as `Equivalent`. Must be a "sender"/"client" profile.

code:
  v: TestScript.destination
display:
  v: destination
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: wider
  code:
    v: TestScript.destination
  display:
    v: TestScript.destination
  equivalence:
    v: wider
  comment:
    v: Element `TestScript.destination` is mapped to FHIR STU3 element `TestScript.destination` as `Equivalent`. The purpose of this element is to define the profile of a destination element used elsewhere in the script. Test engines could then use the destination-profile mapping to offer a filtered list of test systems that can serve as the receiver for the interaction.

code:
  v: TestScript.destination.index
display:
  v: index
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.destination.index
  display:
    v: TestScript.destination.index
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.destination.index` is mapped to FHIR STU3 element `TestScript.destination.index` as `Equivalent`. A given destination index (e.g. 1) can appear only once in the list (e.g. Destination 1 cannot be specified twice ... once as Form-Manager and again as Form-Processor within the same script as that could get confusing during test configuration). Different destination indices could play the same actor in the same test script (e.g. You could have two different test systems acting as Form-Manager). The destination indices provided elsewhere in the test script must be one of these destination indices.

code:
  v: TestScript.destination.profile
display:
  v: profile
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.destination.profile
  display:
    v: TestScript.destination.profile
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.destination.profile` is mapped to FHIR STU3 element `TestScript.destination.profile` as `Equivalent`. Must be a "receiver"/"server" profile.

code:
  v: TestScript.metadata
display:
  v: metadata
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: wider
  code:
    v: TestScript.metadata
  display:
    v: TestScript.metadata
  equivalence:
    v: wider
  comment:
    v: Element `TestScript.metadata` is mapped to FHIR STU3 element `TestScript.metadata` as `Equivalent`.

code:
  v: TestScript.metadata.link
display:
  v: link
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: wider
  code:
    v: TestScript.metadata.link
  display:
    v: TestScript.metadata.link
  equivalence:
    v: wider
  comment:
    v: Element `TestScript.metadata.link` is mapped to FHIR STU3 element `TestScript.metadata.link` as `Equivalent`.

code:
  v: TestScript.metadata.link.url
display:
  v: url
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.metadata.link.url
  display:
    v: TestScript.metadata.link.url
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.metadata.link.url` is mapped to FHIR STU3 element `TestScript.metadata.link.url` as `Equivalent`.

code:
  v: TestScript.metadata.link.description
display:
  v: description
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.metadata.link.description
  display:
    v: TestScript.metadata.link.description
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.metadata.link.description` is mapped to FHIR STU3 element `TestScript.metadata.link.description` as `Equivalent`.

code:
  v: TestScript.metadata.capability
display:
  v: capability
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: wider
  code:
    v: TestScript.metadata.capability
  display:
    v: TestScript.metadata.capability
  equivalence:
    v: wider
  comment:
    v: Element `TestScript.metadata.capability` is mapped to FHIR STU3 element `TestScript.metadata.capability` as `Equivalent`. When the metadata capabilities section is defined at TestScript.metadata or at TestScript.setup.metadata, and the server's conformance statement does not contain the elements defined in the minimal conformance statement, then all the tests in the TestScript are skipped. When the metadata capabilities section is defined at TestScript.test.metadata and the server's conformance statement does not contain the elements defined in the minimal conformance statement, then only that test is skipped. The "metadata.capabilities.required" and "metadata.capabilities.validated" elements only indicate whether the capabilities are the primary focus of the test script or not. They do not impact the skipping logic. Capabilities whose "metadata.capabilities.validated" flag is true are the primary focus of the test script.

code:
  v: TestScript.metadata.capability.required
display:
  v: required
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.metadata.capability.required
  display:
    v: TestScript.metadata.capability.required
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.metadata.capability.required` is mapped to FHIR STU3 element `TestScript.metadata.capability.required` as `Equivalent`.

code:
  v: TestScript.metadata.capability.validated
display:
  v: validated
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.metadata.capability.validated
  display:
    v: TestScript.metadata.capability.validated
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.metadata.capability.validated` is mapped to FHIR STU3 element `TestScript.metadata.capability.validated` as `Equivalent`.

code:
  v: TestScript.metadata.capability.description
display:
  v: description
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.metadata.capability.description
  display:
    v: TestScript.metadata.capability.description
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.metadata.capability.description` is mapped to FHIR STU3 element `TestScript.metadata.capability.description` as `Equivalent`.

code:
  v: TestScript.metadata.capability.origin
display:
  v: origin
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.metadata.capability.origin
  display:
    v: TestScript.metadata.capability.origin
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.metadata.capability.origin` is mapped to FHIR STU3 element `TestScript.metadata.capability.origin` as `Equivalent`.

code:
  v: TestScript.metadata.capability.destination
display:
  v: destination
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.metadata.capability.destination
  display:
    v: TestScript.metadata.capability.destination
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.metadata.capability.destination` is mapped to FHIR STU3 element `TestScript.metadata.capability.destination` as `Equivalent`.

code:
  v: TestScript.metadata.capability.link
display:
  v: link
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.metadata.capability.link
  display:
    v: TestScript.metadata.capability.link
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.metadata.capability.link` is mapped to FHIR STU3 element `TestScript.metadata.capability.link` as `Equivalent`.

code:
  v: TestScript.metadata.capability.capabilities
display:
  v: capabilities
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: wider
  code:
    v: TestScript.metadata.capability.capabilities
  display:
    v: TestScript.metadata.capability.capabilities
  equivalence:
    v: wider
  comment:
    v: Element `TestScript.metadata.capability.capabilities` is mapped to FHIR STU3 element `TestScript.metadata.capability.capabilities` as `SourceIsBroaderThanTarget`. The mappings for `TestScript.metadata.capability.capabilities` do not cover the following types: canonical. The mappings for `TestScript.metadata.capability.capabilities` do not cover the following types based on type expansion: value. The conformance statement of the server has to contain at a minimum the contents of the reference pointed to by this element.

code:
  v: TestScript.fixture
display:
  v: fixture
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: wider
  code:
    v: TestScript.fixture
  display:
    v: TestScript.fixture
  equivalence:
    v: wider
  comment:
    v: Element `TestScript.fixture` is mapped to FHIR STU3 element `TestScript.fixture` as `Equivalent`.

code:
  v: TestScript.fixture.autocreate
display:
  v: autocreate
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.fixture.autocreate
  display:
    v: TestScript.fixture.autocreate
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.fixture.autocreate` is mapped to FHIR STU3 element `TestScript.fixture.autocreate` as `Equivalent`.

code:
  v: TestScript.fixture.autodelete
display:
  v: autodelete
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.fixture.autodelete
  display:
    v: TestScript.fixture.autodelete
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.fixture.autodelete` is mapped to FHIR STU3 element `TestScript.fixture.autodelete` as `Equivalent`.

code:
  v: TestScript.fixture.resource
display:
  v: resource
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: wider
  code:
    v: TestScript.fixture.resource
  display:
    v: TestScript.fixture.resource
  equivalence:
    v: wider
  comment:
    v: Element `TestScript.fixture.resource` is mapped to FHIR STU3 element `TestScript.fixture.resource` as `SourceIsBroaderThanTarget`. The mappings for `TestScript.fixture.resource` do not cover the following types based on type expansion: display, identifier, reference, type. The standard extension `alternate-reference` has been mapped as the representation of FHIR R4B element `TestScript.fixture.resource` with unmapped reference targets: Resource. See http://build.fhir.org/resourcelist.html for complete list of resource types.

code:
  v: TestScript.profile
display:
  v: profile
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: wider
  code:
    v: TestScript.profile
  display:
    v: TestScript.profile
  equivalence:
    v: wider
  comment:
    v: Element `TestScript.profile` is mapped to FHIR STU3 element `TestScript.profile` as `SourceIsBroaderThanTarget`. The mappings for `TestScript.profile` do not cover the following types based on type expansion: display, identifier, reference, type. The standard extension `alternate-reference` has been mapped as the representation of FHIR R4B element `TestScript.profile` with unmapped reference targets: Resource. See http://build.fhir.org/resourcelist.html for complete list of resource types.

code:
  v: TestScript.variable
display:
  v: variable
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: wider
  code:
    v: TestScript.variable
  display:
    v: TestScript.variable
  equivalence:
    v: wider
  comment:
    v: Element `TestScript.variable` is mapped to FHIR STU3 element `TestScript.variable` as `Equivalent`. Variables would be set based either on XPath/JSONPath expressions against fixtures (static and response), or headerField evaluations against response headers. If variable evaluates to nodelist or anything other than a primitive value, then test engine would report an error. Variables would be used to perform clean replacements in "operation.params", "operation.requestHeader.value", and "operation.url" element values during operation calls and in "assert.value" during assertion evaluations. This limits the places that test engines would need to look for placeholders "${}". Variables are scoped to the whole script. They are NOT evaluated at declaration. They are evaluated by test engine when used for substitutions in "operation.params", "operation.requestHeader.value", and "operation.url" element values during operation calls and in "assert.value" during assertion evaluations. See example testscript-search.xml.

code:
  v: TestScript.variable.name
display:
  v: name
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.variable.name
  display:
    v: TestScript.variable.name
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.variable.name` is mapped to FHIR STU3 element `TestScript.variable.name` as `Equivalent`. Placeholders would contain the variable name wrapped in ${} in "operation.params", "operation.requestHeader.value", and "operation.url" elements. These placeholders would need to be replaced by the variable value before the operation is executed.

code:
  v: TestScript.variable.defaultValue
display:
  v: defaultValue
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.variable.defaultValue
  display:
    v: TestScript.variable.defaultValue
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.variable.defaultValue` is mapped to FHIR STU3 element `TestScript.variable.defaultValue` as `Equivalent`. The purpose of this element is to allow for a pre-defined value that can be used as a default or as an override value. Test engines can optionally use this as a placeholder for user-defined execution time values.

code:
  v: TestScript.variable.description
display:
  v: description
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.variable.description
  display:
    v: TestScript.variable.description
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.variable.description` is mapped to FHIR STU3 element `TestScript.variable.description` as `Equivalent`.

code:
  v: TestScript.variable.expression
display:
  v: expression
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.variable.expression
  display:
    v: TestScript.variable.expression
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.variable.expression` is mapped to FHIR STU3 element `TestScript.variable.expression` as `Equivalent`. If headerField is defined, then the variable will be evaluated against the headers that sourceId is pointing to. If expression or path is defined, then the variable will be evaluated against the fixture body that sourceId is pointing to. It is an error to define any combination of expression, headerField and path.

code:
  v: TestScript.variable.headerField
display:
  v: headerField
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.variable.headerField
  display:
    v: TestScript.variable.headerField
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.variable.headerField` is mapped to FHIR STU3 element `TestScript.variable.headerField` as `Equivalent`. If headerField is defined, then the variable will be evaluated against the headers that sourceId is pointing to. If path is defined, then the variable will be evaluated against the fixture body that sourceId is pointing to. It is an error to define both headerField and path.

code:
  v: TestScript.variable.hint
display:
  v: hint
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.variable.hint
  display:
    v: TestScript.variable.hint
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.variable.hint` is mapped to FHIR STU3 element `TestScript.variable.hint` as `Equivalent`.

code:
  v: TestScript.variable.path
display:
  v: path
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.variable.path
  display:
    v: TestScript.variable.path
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.variable.path` is mapped to FHIR STU3 element `TestScript.variable.path` as `Equivalent`. If headerField is defined, then the variable will be evaluated against the headers that sourceId is pointing to. If expression or path is defined, then the variable will be evaluated against the fixture body that sourceId is pointing to. It is an error to define any combination of expression, headerField and path.

code:
  v: TestScript.variable.sourceId
display:
  v: sourceId
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.variable.sourceId
  display:
    v: TestScript.variable.sourceId
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.variable.sourceId` is mapped to FHIR STU3 element `TestScript.variable.sourceId` as `Equivalent`. This can be a statically defined fixture (at the top of the TestScript) or a dynamically set fixture created by responseId of the `action.operation` element.

code:
  v: TestScript.setup
display:
  v: setup
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: wider
  code:
    v: TestScript.setup
  display:
    v: TestScript.setup
  equivalence:
    v: wider
  comment:
    v: Element `TestScript.setup` is mapped to FHIR STU3 element `TestScript.setup` as `Equivalent`.

code:
  v: TestScript.setup.action
display:
  v: action
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: wider
  code:
    v: TestScript.setup.action
  display:
    v: TestScript.setup.action
  equivalence:
    v: wider
  comment:
    v: Element `TestScript.setup.action` is mapped to FHIR STU3 element `TestScript.setup.action` as `Equivalent`. An action should contain either an operation or an assertion but not both. It can contain any number of variables.

code:
  v: TestScript.setup.action.operation
display:
  v: operation
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: wider
  code:
    v: TestScript.setup.action.operation
  display:
    v: TestScript.setup.action.operation
  equivalence:
    v: wider
  comment:
    v: Element `TestScript.setup.action.operation` is mapped to FHIR STU3 element `TestScript.setup.action.operation` as `Equivalent`.

code:
  v: TestScript.setup.action.operation.type
display:
  v: type
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.setup.action.operation.type
  display:
    v: TestScript.setup.action.operation.type
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.setup.action.operation.type` is mapped to FHIR STU3 element `TestScript.setup.action.operation.type` as `Equivalent`. See http://build.fhir.org/http.html for list of server interactions.

code:
  v: TestScript.setup.action.operation.resource
display:
  v: resource
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: wider
  code:
    v: TestScript.setup.action.operation.resource
  display:
    v: TestScript.setup.action.operation.resource
  equivalence:
    v: wider
  comment:
    v: Element `TestScript.setup.action.operation.resource` is mapped to FHIR STU3 element `TestScript.setup.action.operation.resource` as `RelatedTo`. The mappings for `TestScript.setup.action.operation.resource` do not allow expression of the necessary codes, per the bindings on the source and target. If "url" element is specified, then "targetId", "params", and "resource" elements will be ignored as "url" element will have everything needed for constructing the request url. If "params" element is specified, then "targetId" element is ignored. For FHIR operations that require a resource (e.g. "read" and "vread" operations), the "resource" element must be specified when "params" element is specified. If "url" and "params" elements are absent, then the request url will be constructed from "targetId" fixture if present. For "read" operation, the resource and id values will be extracted from "targetId" fixture and used to construct the url. For "vread" and "history" operations, the versionId value will also be used.

code:
  v: TestScript.setup.action.operation.label
display:
  v: label
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.setup.action.operation.label
  display:
    v: TestScript.setup.action.operation.label
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.setup.action.operation.label` is mapped to FHIR STU3 element `TestScript.setup.action.operation.label` as `Equivalent`. This has no impact on the verification itself.

code:
  v: TestScript.setup.action.operation.description
display:
  v: description
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.setup.action.operation.description
  display:
    v: TestScript.setup.action.operation.description
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.setup.action.operation.description` is mapped to FHIR STU3 element `TestScript.setup.action.operation.description` as `Equivalent`. This has no impact on the verification itself.

code:
  v: TestScript.setup.action.operation.accept
display:
  v: accept
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.setup.action.operation.accept
  display:
    v: TestScript.setup.action.operation.accept
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.setup.action.operation.accept` is mapped to FHIR STU3 element `TestScript.setup.action.operation.accept` as `Equivalent`. If this is specified, then test engine shall set the 'Accept' header to the corresponding value. If you'd like to explicitly set the 'Accept' to some other value then use the 'requestHeader' element.

code:
  v: TestScript.setup.action.operation.contentType
display:
  v: contentType
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.setup.action.operation.contentType
  display:
    v: TestScript.setup.action.operation.contentType
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.setup.action.operation.contentType` is mapped to FHIR STU3 element `TestScript.setup.action.operation.contentType` as `Equivalent`. If this is specified, then test engine shall set the 'Content-Type' header to the corresponding value. If you'd like to explicitly set the 'Content-Type' to some other value then use the 'requestHeader' element.

code:
  v: TestScript.setup.action.operation.destination
display:
  v: destination
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.setup.action.operation.destination
  display:
    v: TestScript.setup.action.operation.destination
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.setup.action.operation.destination` is mapped to FHIR STU3 element `TestScript.setup.action.operation.destination` as `Equivalent`. If multiple TestScript.destination elements are defined and operation.destination is undefined, test engine will report an error as it cannot determine what destination to use for the exchange.

code:
  v: TestScript.setup.action.operation.encodeRequestUrl
display:
  v: encodeRequestUrl
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.setup.action.operation.encodeRequestUrl
  display:
    v: TestScript.setup.action.operation.encodeRequestUrl
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.setup.action.operation.encodeRequestUrl` is mapped to FHIR STU3 element `TestScript.setup.action.operation.encodeRequestUrl` as `Equivalent`.

code:
  v: TestScript.setup.action.operation.origin
display:
  v: origin
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.setup.action.operation.origin
  display:
    v: TestScript.setup.action.operation.origin
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.setup.action.operation.origin` is mapped to FHIR STU3 element `TestScript.setup.action.operation.origin` as `Equivalent`. If absent, test engine will send the message. When present, test engine will not send the request message but will wait for the request message to be sent from this origin server.

code:
  v: TestScript.setup.action.operation.params
display:
  v: params
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.setup.action.operation.params
  display:
    v: TestScript.setup.action.operation.params
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.setup.action.operation.params` is mapped to FHIR STU3 element `TestScript.setup.action.operation.params` as `Equivalent`. If "url" element is specified, then "targetId", "params", and "resource" elements will be ignored as "url" element will have everything needed for constructing the request url. If "params" element is specified, then "targetId" element is ignored. For FHIR operations that require a resource (e.g. "read" and "vread" operations), the "resource" element must be specified when "params" element is specified. If "url" and "params" elements are absent, then the request url will be constructed from "targetId" fixture if present. For "read" operation, the resource and id values will be extracted from "targetId" fixture and used to construct the url. For "vread" and "history" operations, the versionId value will also be used. Test engines would append whatever is specified for "params" to the URL after the resource type without tampering with the string (beyond encoding the URL for HTTP). The "params" element does not correspond exactly to "search parameters". Nor is it the "path". It corresponds to the part of the URL that comes after the [type] (when "resource" element is specified); e.g. It corresponds to "/[id]/_history/[vid] {?_format=[mime-type]}" in the following operation: GET [base]/[type]/[id]/_history/[vid] {?_format=[mime-type]} Test engines do have to look for placeholders (${}) and replace the variable placeholders with the variable values at runtime before sending the request.

code:
  v: TestScript.setup.action.operation.requestHeader
display:
  v: requestHeader
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: wider
  code:
    v: TestScript.setup.action.operation.requestHeader
  display:
    v: TestScript.setup.action.operation.requestHeader
  equivalence:
    v: wider
  comment:
    v: Element `TestScript.setup.action.operation.requestHeader` is mapped to FHIR STU3 element `TestScript.setup.action.operation.requestHeader` as `Equivalent`. This gives control to test-script writers to set headers explicitly based on test requirements. It will allow for testing using: - "If-Modified-Since" and "If-None-Match" headers. See http://build.fhir.org/http.html#2.1.0.5.1 - "If-Match" header. See http://build.fhir.org/http.html#2.1.0.11 - Conditional Create using "If-None-Exist". See http://build.fhir.org/http.html#2.1.0.13.1 - Invalid "Content-Type" header for negative testing. - etc.

code:
  v: TestScript.setup.action.operation.requestHeader.field
display:
  v: field
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.setup.action.operation.requestHeader.field
  display:
    v: TestScript.setup.action.operation.requestHeader.field
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.setup.action.operation.requestHeader.field` is mapped to FHIR STU3 element `TestScript.setup.action.operation.requestHeader.field` as `Equivalent`. If header element is specified, then field is required.

code:
  v: TestScript.setup.action.operation.requestHeader.value
display:
  v: value
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.setup.action.operation.requestHeader.value
  display:
    v: TestScript.setup.action.operation.requestHeader.value
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.setup.action.operation.requestHeader.value` is mapped to FHIR STU3 element `TestScript.setup.action.operation.requestHeader.value` as `Equivalent`. If header element is specified, then value is required. No conversions will be done by the test engine e.g. "xml" to "application/fhir+xml". The values will be set in HTTP headers "as-is". Test engines do have to look for placeholders (${}) and replace the variable placeholders with the variable values at runtime before sending the request.

code:
  v: TestScript.setup.action.operation.requestId
display:
  v: requestId
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.setup.action.operation.requestId
  display:
    v: TestScript.setup.action.operation.requestId
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.setup.action.operation.requestId` is mapped to FHIR STU3 element `TestScript.setup.action.operation.requestId` as `Equivalent`. If a requestId is supplied, then the resulting request (both headers and body) is mapped to the fixture ID (which may be entirely new and previously undeclared) designated by "requestId". If requestId is not specified, it is the test engine's responsibility to store the request and use it as the requestId in subsequent assertions when assertion path and/or headerField is specified, direction is equal to request, and the requestId in not specified.

code:
  v: TestScript.setup.action.operation.responseId
display:
  v: responseId
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.setup.action.operation.responseId
  display:
    v: TestScript.setup.action.operation.responseId
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.setup.action.operation.responseId` is mapped to FHIR STU3 element `TestScript.setup.action.operation.responseId` as `Equivalent`. If a responseId is supplied, and the server responds, then the resulting response (both headers and body) is mapped to the fixture ID (which may be entirely new and previously undeclared) designated by "responseId". If responseId is not specified, it is the test engine's responsibility to store the response and use it as the responseId in subsequent assertions when assertion path and/or headerField is specified and the responseId is not specified.

code:
  v: TestScript.setup.action.operation.sourceId
display:
  v: sourceId
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.setup.action.operation.sourceId
  display:
    v: TestScript.setup.action.operation.sourceId
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.setup.action.operation.sourceId` is mapped to FHIR STU3 element `TestScript.setup.action.operation.sourceId` as `Equivalent`.

code:
  v: TestScript.setup.action.operation.targetId
display:
  v: targetId
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.setup.action.operation.targetId
  display:
    v: TestScript.setup.action.operation.targetId
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.setup.action.operation.targetId` is mapped to FHIR STU3 element `TestScript.setup.action.operation.targetId` as `Equivalent`. If "url" element is specified, then "targetId", "params", and "resource" elements will be ignored as "url" element will have everything needed for constructing the request url. If "params" element is specified, then "targetId" element is ignored. For FHIR operations that require a resource (e.g. "read" and "vread" operations), the "resource" element must be specified when "params" element is specified. If "url" and "params" elements are absent, then the request url will be constructed from "targetId" fixture if present. For "read" operation, the resource and id values will be extracted from "targetId" fixture and used to construct the url. For "vread" and "history" operations, the versionId value will also be used.

code:
  v: TestScript.setup.action.operation.url
display:
  v: url
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.setup.action.operation.url
  display:
    v: TestScript.setup.action.operation.url
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.setup.action.operation.url` is mapped to FHIR STU3 element `TestScript.setup.action.operation.url` as `Equivalent`. Used to set the request URL explicitly. If "url" element is defined, then "targetId", "resource", and "params" elements will be ignored. Test engines would use whatever is specified in "url" without tampering with the string (beyond encoding the URL for HTTP). Test engines do have to look for placeholders (${}) and replace the variable placeholders with the variable values at runtime before sending the request.

code:
  v: TestScript.setup.action.assert
display:
  v: assert
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: wider
  code:
    v: TestScript.setup.action.assert
  display:
    v: TestScript.setup.action.assert
  equivalence:
    v: wider
  comment:
    v: Element `TestScript.setup.action.assert` is mapped to FHIR STU3 element `TestScript.setup.action.assert` as `Equivalent`. In order to evaluate an assertion, the request, response, and results of the most recently executed operation must always be maintained by the test engine.

code:
  v: TestScript.setup.action.assert.label
display:
  v: label
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.setup.action.assert.label
  display:
    v: TestScript.setup.action.assert.label
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.setup.action.assert.label` is mapped to FHIR STU3 element `TestScript.setup.action.assert.label` as `Equivalent`. This has no impact on the verification itself.

code:
  v: TestScript.setup.action.assert.description
display:
  v: description
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.setup.action.assert.description
  display:
    v: TestScript.setup.action.assert.description
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.setup.action.assert.description` is mapped to FHIR STU3 element `TestScript.setup.action.assert.description` as `Equivalent`. This has no impact on the verification itself.

code:
  v: TestScript.setup.action.assert.direction
display:
  v: direction
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.setup.action.assert.direction
  display:
    v: TestScript.setup.action.assert.direction
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.setup.action.assert.direction` is mapped to FHIR STU3 element `TestScript.setup.action.assert.direction` as `Equivalent`. If the direction is specified as "response" (the default), then the processing of this assert is against the received response message. If the direction is specified as "request", then the processing of this assert is against the sent request message.

code:
  v: TestScript.setup.action.assert.compareToSourceId
display:
  v: compareToSourceId
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.setup.action.assert.compareToSourceId
  display:
    v: TestScript.setup.action.assert.compareToSourceId
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.setup.action.assert.compareToSourceId` is mapped to FHIR STU3 element `TestScript.setup.action.assert.compareToSourceId` as `Equivalent`.

code:
  v: TestScript.setup.action.assert.compareToSourceExpression
display:
  v: compareToSourceExpression
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.setup.action.assert.compareToSourceExpression
  display:
    v: TestScript.setup.action.assert.compareToSourceExpression
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.setup.action.assert.compareToSourceExpression` is mapped to FHIR STU3 element `TestScript.setup.action.assert.compareToSourceExpression` as `Equivalent`. Thefhirpath expression to be evaluated against the expected fixture to compare to. Ignored if "assert.value" is used. The evaluation will be done before the assertion is evaluated.

code:
  v: TestScript.setup.action.assert.compareToSourcePath
display:
  v: compareToSourcePath
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.setup.action.assert.compareToSourcePath
  display:
    v: TestScript.setup.action.assert.compareToSourcePath
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.setup.action.assert.compareToSourcePath` is mapped to FHIR STU3 element `TestScript.setup.action.assert.compareToSourcePath` as `Equivalent`. The XPath or JSONPath expression to be evaluated against the expected fixture to compare to. Ignored if "assert.value" is used. The evaluation will be done before the assertion is evaluated.

code:
  v: TestScript.setup.action.assert.contentType
display:
  v: contentType
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.setup.action.assert.contentType
  display:
    v: TestScript.setup.action.assert.contentType
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.setup.action.assert.contentType` is mapped to FHIR STU3 element `TestScript.setup.action.assert.contentType` as `Equivalent`. If this is specified, then test engine shall confirm that the content-type of the last operation's headers is set to this value. If "assert.sourceId" element is specified, then the evaluation will be done against the headers mapped to that sourceId (and not the last operation's headers). If you'd like to have more control over the string, then use 'assert.headerField' instead.

code:
  v: TestScript.setup.action.assert.expression
display:
  v: expression
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.setup.action.assert.expression
  display:
    v: TestScript.setup.action.assert.expression
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.setup.action.assert.expression` is mapped to FHIR STU3 element `TestScript.setup.action.assert.expression` as `Equivalent`. If both "expression" and a "fixtureId" are specified, then the expression will be evaluated against the request or response body mapped to the fixtureId. If "expression" is specified and a "fixtureId" is not, then the expression will be evaluated against the response body of the last operation. Test engines are to store the request and response body and headers of the last operation at all times for subsequent assertions.

code:
  v: TestScript.setup.action.assert.headerField
display:
  v: headerField
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.setup.action.assert.headerField
  display:
    v: TestScript.setup.action.assert.headerField
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.setup.action.assert.headerField` is mapped to FHIR STU3 element `TestScript.setup.action.assert.headerField` as `Equivalent`. If "headerField" is specified then "value" must be specified. If "sourceId" is not specified, then "headerField" will be evaluated against the last operation's response headers. Test engines are to keep track of the last operation's response body and response headers.

code:
  v: TestScript.setup.action.assert.minimumId
display:
  v: minimumId
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.setup.action.assert.minimumId
  display:
    v: TestScript.setup.action.assert.minimumId
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.setup.action.assert.minimumId` is mapped to FHIR STU3 element `TestScript.setup.action.assert.minimumId` as `Equivalent`. Asserts that the response contains all the element/content in another fixture pointed to by minimumId. This can be a statically defined fixture or one that is dynamically set via responseId.

code:
  v: TestScript.setup.action.assert.navigationLinks
display:
  v: navigationLinks
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.setup.action.assert.navigationLinks
  display:
    v: TestScript.setup.action.assert.navigationLinks
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.setup.action.assert.navigationLinks` is mapped to FHIR STU3 element `TestScript.setup.action.assert.navigationLinks` as `Equivalent`. Asserts that the Bundle contains first, last, and next links.

code:
  v: TestScript.setup.action.assert.operator
display:
  v: operator
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.setup.action.assert.operator
  display:
    v: TestScript.setup.action.assert.operator
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.setup.action.assert.operator` is mapped to FHIR STU3 element `TestScript.setup.action.assert.operator` as `Equivalent`. Operators are useful especially for negative testing. If operator is not specified, then the "equals" operator is assumed; e.g. ``` <assert> <operator value="in" /> <responseCode value="200,201,204" /> </assert> <assert> <operator value="notEquals" /> <response value="okay"/> </assert> <assert> <operator value="greaterThan" /> <responseHeader> <field value="Content-Length" /> <value value="0" /> </responseHeader/> </assert> ```.

code:
  v: TestScript.setup.action.assert.path
display:
  v: path
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.setup.action.assert.path
  display:
    v: TestScript.setup.action.assert.path
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.setup.action.assert.path` is mapped to FHIR STU3 element `TestScript.setup.action.assert.path` as `Equivalent`. If both "path" and a "fixtureId" are specified, then the path will be evaluated against the request or response body mapped to the fixtureId. If "path" is specified and a "fixtureId" is not, then the path will be evaluated against the response body of the last operation. Test engines are to store the request and response body and headers of the last operation at all times for subsequent assertions.

code:
  v: TestScript.setup.action.assert.requestMethod
display:
  v: requestMethod
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: wider
  code:
    v: TestScript.setup.action.assert.requestMethod
  display:
    v: TestScript.setup.action.assert.requestMethod
  equivalence:
    v: wider
  comment:
    v: Element `TestScript.setup.action.assert.requestMethod` is mapped to FHIR STU3 element `TestScript.setup.action.assert.requestMethod` as `SourceIsBroaderThanTarget`. If "requestMethod" is specified then it will be used in place of "value". The "requestMethod" will evaluate against the last operation's request HTTP operation.

code:
  v: TestScript.setup.action.assert.requestURL
display:
  v: requestURL
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.setup.action.assert.requestURL
  display:
    v: TestScript.setup.action.assert.requestURL
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.setup.action.assert.requestURL` is mapped to FHIR STU3 element `TestScript.setup.action.assert.requestURL` as `Equivalent`. If "requestURL" is specified then it will be used in place of "value". The "requestURL" will evaluate against the last operation's full request URL path string.

code:
  v: TestScript.setup.action.assert.resource
display:
  v: resource
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: wider
  code:
    v: TestScript.setup.action.assert.resource
  display:
    v: TestScript.setup.action.assert.resource
  equivalence:
    v: wider
  comment:
    v: Element `TestScript.setup.action.assert.resource` is mapped to FHIR STU3 element `TestScript.setup.action.assert.resource` as `RelatedTo`. The mappings for `TestScript.setup.action.assert.resource` do not allow expression of the necessary codes, per the bindings on the source and target. This will be expected resource type in response body e.g. in read, vread, search, etc. See http://build.fhir.org/resourcelist.html for complete list of resource types; e.g. <assert > <resourceType value="Patient" </assert>.

code:
  v: TestScript.setup.action.assert.response
display:
  v: response
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.setup.action.assert.response
  display:
    v: TestScript.setup.action.assert.response
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.setup.action.assert.response` is mapped to FHIR STU3 element `TestScript.setup.action.assert.response` as `Equivalent`. This is a shorter way of achieving similar verifications via "assert.responseCode". If you need more control, then use "assert.responseCode" e.g. <assert> <contentType value="json" /> <response value="okay"/> </assert>.

code:
  v: TestScript.setup.action.assert.responseCode
display:
  v: responseCode
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.setup.action.assert.responseCode
  display:
    v: TestScript.setup.action.assert.responseCode
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.setup.action.assert.responseCode` is mapped to FHIR STU3 element `TestScript.setup.action.assert.responseCode` as `Equivalent`. To be used with "operator" attribute value. Asserts that the response code equals this value if "operator" is not specified. If the operator is "in" or "notIn" then the responseCode would be a comma-separated list of values e.g. "200,201". Otherwise, it's expected to be a numeric value. If "fixture" is not specified, then the "responseBodyId" value of the last operation is assumed.

code:
  v: TestScript.setup.action.assert.sourceId
display:
  v: sourceId
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.setup.action.assert.sourceId
  display:
    v: TestScript.setup.action.assert.sourceId
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.setup.action.assert.sourceId` is mapped to FHIR STU3 element `TestScript.setup.action.assert.sourceId` as `Equivalent`. This can be a statically defined fixture (at the top of the testscript) or a dynamically set fixture created by responseId of the action.operation element.

code:
  v: TestScript.setup.action.assert.validateProfileId
display:
  v: validateProfileId
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.setup.action.assert.validateProfileId
  display:
    v: TestScript.setup.action.assert.validateProfileId
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.setup.action.assert.validateProfileId` is mapped to FHIR STU3 element `TestScript.setup.action.assert.validateProfileId` as `Equivalent`. The ID of a Profile fixture. Asserts that the response is valid according to the Profile specified by validateProfileId.

code:
  v: TestScript.setup.action.assert.value
display:
  v: value
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.setup.action.assert.value
  display:
    v: TestScript.setup.action.assert.value
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.setup.action.assert.value` is mapped to FHIR STU3 element `TestScript.setup.action.assert.value` as `Equivalent`. The string-representation of a number, string, or boolean that is expected. Test engines do have to look for placeholders (${}) and replace the variable placeholders with the variable values at runtime before comparing this value to the actual value.

code:
  v: TestScript.setup.action.assert.warningOnly
display:
  v: warningOnly
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.setup.action.assert.warningOnly
  display:
    v: TestScript.setup.action.assert.warningOnly
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.setup.action.assert.warningOnly` is mapped to FHIR STU3 element `TestScript.setup.action.assert.warningOnly` as `Equivalent`. If this element is specified and it is true, then assertion failures can be logged by test engine but should not stop the test script execution from proceeding. There are likely cases where the spec is not clear on what should happen. If the spec says something is optional (maybe a response header for example), but a server doesn’t do it, we could choose to issue a warning.

code:
  v: TestScript.test
display:
  v: test
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: wider
  code:
    v: TestScript.test
  display:
    v: TestScript.test
  equivalence:
    v: wider
  comment:
    v: Element `TestScript.test` is mapped to FHIR STU3 element `TestScript.test` as `Equivalent`.

code:
  v: TestScript.test.name
display:
  v: name
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.test.name
  display:
    v: TestScript.test.name
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.test.name` is mapped to FHIR STU3 element `TestScript.test.name` as `Equivalent`.

code:
  v: TestScript.test.description
display:
  v: description
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.test.description
  display:
    v: TestScript.test.description
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.test.description` is mapped to FHIR STU3 element `TestScript.test.description` as `Equivalent`.

code:
  v: TestScript.test.action
display:
  v: action
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: wider
  code:
    v: TestScript.test.action
  display:
    v: TestScript.test.action
  equivalence:
    v: wider
  comment:
    v: Element `TestScript.test.action` is mapped to FHIR STU3 element `TestScript.test.action` as `Equivalent`. An action should contain either an operation or an assertion but not both. It can contain any number of variables.

code:
  v: TestScript.test.action.operation
display:
  v: operation
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.test.action.operation
  display:
    v: TestScript.test.action.operation
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.test.action.operation` is mapped to FHIR STU3 element `TestScript.test.action.operation` as `Equivalent`.

code:
  v: TestScript.test.action.assert
display:
  v: assert
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.test.action.assert
  display:
    v: TestScript.test.action.assert
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.test.action.assert` is mapped to FHIR STU3 element `TestScript.test.action.assert` as `Equivalent`. In order to evaluate an assertion, the request, response, and results of the most recently executed operation must always be maintained by the test engine.

code:
  v: TestScript.teardown
display:
  v: teardown
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: wider
  code:
    v: TestScript.teardown
  display:
    v: TestScript.teardown
  equivalence:
    v: wider
  comment:
    v: Element `TestScript.teardown` is mapped to FHIR STU3 element `TestScript.teardown` as `Equivalent`.

code:
  v: TestScript.teardown.action
display:
  v: action
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: wider
  code:
    v: TestScript.teardown.action
  display:
    v: TestScript.teardown.action
  equivalence:
    v: wider
  comment:
    v: Element `TestScript.teardown.action` is mapped to FHIR STU3 element `TestScript.teardown.action` as `Equivalent`. An action should contain either an operation or an assertion but not both. It can contain any number of variables.

code:
  v: TestScript.teardown.action.operation
display:
  v: operation
target:
  modifier extension:
    url:
      v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
      l: extension-ConceptMap.element.target.equivalence
    value: Code
      v: equivalent
  code:
    v: TestScript.teardown.action.operation
  display:
    v: TestScript.teardown.action.operation
  equivalence:
    v: equivalent
  comment:
    v: Element `TestScript.teardown.action.operation` is mapped to FHIR STU3 element `TestScript.teardown.action.operation` as `Equivalent`.

source:
  v: http://hl7.org/fhir/StructureDefinition/TestScript
  l: TestScript
source version:
  v: 4.3.0
target:
  v: http://hl7.org/fhir/4.3/StructureDefinition/extension-TestScript.meta
  l: extension-TestScript.meta
target version:
  v: 0.1.0
element:
  code:
    v: TestScript.meta
  display:
    v: meta
  target:
    modifier extension:
      url:
        v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
        l: extension-ConceptMap.element.target.equivalence
      value: Code
        v: equivalent
    code:
      v: Extension
    equivalence:
      v: equivalent
    comment:
      v: Element `TestScript.meta` is mapped to FHIR STU3 element `TestScript.meta` as `SourceIsBroaderThanTarget`. The mappings for `TestScript.meta` do not cover the following types: Meta. The mappings for `TestScript.meta` do not cover the following types based on type expansion: lastUpdated, profile, security, source, tag, versionId.

source:
  v: http://hl7.org/fhir/StructureDefinition/TestScript
  l: TestScript
source version:
  v: 4.3.0
target:
  v: http://hl7.org/fhir/4.3/StructureDefinition/extension-TestScript.text
  l: extension-TestScript.text
target version:
  v: 0.1.0
element:
  code:
    v: TestScript.text
  display:
    v: text
  target:
    modifier extension:
      url:
        v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
        l: extension-ConceptMap.element.target.equivalence
      value: Code
        v: equivalent
    code:
      v: Extension
    equivalence:
      v: equivalent
    comment:
      v: Element `TestScript.text` is mapped to FHIR STU3 element `TestScript.text` as `SourceIsBroaderThanTarget`. The mappings for `TestScript.text` do not cover the following types: Narrative. The mappings for `TestScript.text` do not cover the following types based on type expansion: div, status. Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

source:
  v: http://hl7.org/fhir/StructureDefinition/TestScript
  l: TestScript
source version:
  v: 4.3.0
target:
  v: http://hl7.org/fhir/4.3/StructureDefinition/extension-TestScript.identifier
  l: extension-TestScript.identifier
target version:
  v: 0.1.0
element:
  code:
    v: TestScript.identifier
  display:
    v: identifier
  target:
    modifier extension:
      url:
        v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
        l: extension-ConceptMap.element.target.equivalence
      value: Code
        v: equivalent
    code:
      v: Extension
    equivalence:
      v: equivalent
    comment:
      v: Element `TestScript.identifier` is mapped to FHIR STU3 element `TestScript.identifier` as `SourceIsBroaderThanTarget`. The mappings for `TestScript.identifier` do not cover the following types: Identifier. The mappings for `TestScript.identifier` do not cover the following types based on type expansion: assigner, period, system, type, use, value. Typically, this is used for identifiers that can go in an HL7 V3 II (instance identifier) data type, and can then identify this test script outside of FHIR, where it is not possible to use the logical URI.

source:
  v: http://hl7.org/fhir/StructureDefinition/TestScript
  l: TestScript
source version:
  v: 4.3.0
target:
  v: http://hl7.org/fhir/4.3/StructureDefinition/extension-TestScript.contact
  l: extension-TestScript.contact
target version:
  v: 0.1.0
element:
  code:
    v: TestScript.contact
  display:
    v: contact
  target:
    modifier extension:
      url:
        v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
        l: extension-ConceptMap.element.target.equivalence
      value: Code
        v: equivalent
    code:
      v: Extension
    equivalence:
      v: equivalent
    comment:
      v: Element `TestScript.contact` is mapped to FHIR STU3 element `TestScript.contact` as `SourceIsBroaderThanTarget`. The mappings for `TestScript.contact` do not cover the following types: ContactDetail. The mappings for `TestScript.contact` do not cover the following types based on type expansion: name, telecom. May be a web site, an email address, a telephone number, etc.

source:
  v: http://hl7.org/fhir/StructureDefinition/TestScript
  l: TestScript
source version:
  v: 4.3.0
target:
  v: http://hl7.org/fhir/4.3/StructureDefinition/extension-TestScript.useContext
  l: extension-TestScript.useContext
target version:
  v: 0.1.0
element:
  code:
    v: TestScript.useContext
  display:
    v: useContext
  target:
    modifier extension:
      url:
        v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
        l: extension-ConceptMap.element.target.equivalence
      value: Code
        v: equivalent
    code:
      v: Extension
    equivalence:
      v: equivalent
    comment:
      v: Element `TestScript.useContext` is mapped to FHIR STU3 element `TestScript.useContext` as `SourceIsBroaderThanTarget`. The mappings for `TestScript.useContext` do not cover the following types: UsageContext. The mappings for `TestScript.useContext` do not cover the following types based on type expansion: code, value[x]. When multiple useContexts are specified, there is no expectation that all or any of the contexts apply.

source:
  v: http://hl7.org/fhir/StructureDefinition/TestScript
  l: TestScript
source version:
  v: 4.3.0
target:
  v: http://hl7.org/fhir/4.3/StructureDefinition/extension-TestScript.metadata.capability.capabilities
  l: extension-TestScript.metadata.capability.capabilities
target version:
  v: 0.1.0
element:
  code:
    v: TestScript.metadata.capability.capabilities
  display:
    v: capabilities
  target:
    modifier extension:
      url:
        v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
        l: extension-ConceptMap.element.target.equivalence
      value: Code
        v: equivalent
    code:
      v: Extension
    equivalence:
      v: equivalent
    comment:
      v: Element `TestScript.metadata.capability.capabilities` is mapped to FHIR STU3 element `TestScript.metadata.capability.capabilities` as `SourceIsBroaderThanTarget`. The mappings for `TestScript.metadata.capability.capabilities` do not cover the following types: canonical. The mappings for `TestScript.metadata.capability.capabilities` do not cover the following types based on type expansion: value. The conformance statement of the server has to contain at a minimum the contents of the reference pointed to by this element.

source:
  v: http://hl7.org/fhir/StructureDefinition/TestScript
  l: TestScript
source version:
  v: 4.3.0
target:
  v: http://hl7.org/fhir/4.3/StructureDefinition/extension-TestScript.setup.action.operation.resource
  l: extension-TestScript.setup.action.operation.resource
target version:
  v: 0.1.0
element:
  code:
    v: TestScript.setup.action.operation.resource
  display:
    v: resource
  target:
    modifier extension:
      url:
        v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
        l: extension-ConceptMap.element.target.equivalence
      value: Code
        v: equivalent
    code:
      v: Extension
    equivalence:
      v: equivalent
    comment:
      v: Element `TestScript.setup.action.operation.resource` is mapped to FHIR STU3 element `TestScript.setup.action.operation.resource` as `RelatedTo`. The mappings for `TestScript.setup.action.operation.resource` do not allow expression of the necessary codes, per the bindings on the source and target. If "url" element is specified, then "targetId", "params", and "resource" elements will be ignored as "url" element will have everything needed for constructing the request url. If "params" element is specified, then "targetId" element is ignored. For FHIR operations that require a resource (e.g. "read" and "vread" operations), the "resource" element must be specified when "params" element is specified. If "url" and "params" elements are absent, then the request url will be constructed from "targetId" fixture if present. For "read" operation, the resource and id values will be extracted from "targetId" fixture and used to construct the url. For "vread" and "history" operations, the versionId value will also be used.

source:
  v: http://hl7.org/fhir/StructureDefinition/TestScript
  l: TestScript
source version:
  v: 4.3.0
target:
  v: http://hl7.org/fhir/4.3/StructureDefinition/extension-TestScript.setup.action.operation.method
  l: extension-TestScript.setup.action.operation.method
target version:
  v: 0.1.0
element:
  code:
    v: TestScript.setup.action.operation.method
  display:
    v: method
  target:
    modifier extension:
      url:
        v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
        l: extension-ConceptMap.element.target.equivalence
      value: Code
        v: equivalent
    code:
      v: Extension
    equivalence:
      v: equivalent
    comment:
      v: Element `TestScript.setup.action.operation.method` has a context of TestScript.setup.action.operation based on following the parent source element upwards and mapping to `TestScript`. Element `TestScript.setup.action.operation.method` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). The primary purpose of the explicit HTTP method is support of HTTP POST method invocation of the FHIR search. Other uses will include support of negative testing.

source:
  v: http://hl7.org/fhir/StructureDefinition/TestScript
  l: TestScript
source version:
  v: 4.3.0
target:
  v: http://hl7.org/fhir/4.3/StructureDefinition/extension-TestScript.setup.action.assert.requestMethod
  l: extension-TestScript.setup.action.assert.requestMethod
target version:
  v: 0.1.0
element:
  code:
    v: TestScript.setup.action.assert.requestMethod
  display:
    v: requestMethod
  target:
    modifier extension:
      url:
        v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
        l: extension-ConceptMap.element.target.equivalence
      value: Code
        v: equivalent
    code:
      v: Extension
    equivalence:
      v: equivalent
    comment:
      v: Element `TestScript.setup.action.assert.requestMethod` is mapped to FHIR STU3 element `TestScript.setup.action.assert.requestMethod` as `SourceIsBroaderThanTarget`. If "requestMethod" is specified then it will be used in place of "value". The "requestMethod" will evaluate against the last operation's request HTTP operation.

source:
  v: http://hl7.org/fhir/StructureDefinition/TestScript
  l: TestScript
source version:
  v: 4.3.0
target:
  v: http://hl7.org/fhir/4.3/StructureDefinition/extension-TestScript.setup.action.assert.resource
  l: extension-TestScript.setup.action.assert.resource
target version:
  v: 0.1.0
element:
  code:
    v: TestScript.setup.action.assert.resource
  display:
    v: resource
  target:
    modifier extension:
      url:
        v: http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence
        l: extension-ConceptMap.element.target.equivalence
      value: Code
        v: equivalent
    code:
      v: Extension
    equivalence:
      v: equivalent
    comment:
      v: Element `TestScript.setup.action.assert.resource` is mapped to FHIR STU3 element `TestScript.setup.action.assert.resource` as `RelatedTo`. The mappings for `TestScript.setup.action.assert.resource` do not allow expression of the necessary codes, per the bindings on the source and target. This will be expected resource type in response body e.g. in read, vread, search, etc. See http://build.fhir.org/resourcelist.html for complete list of resource types; e.g. <assert > <resourceType value="Patient" </assert>.