Generated Narrative: ConceptMap R4B-Measure-element-map-to-R3 Mapping from http://hl7.org/fhir/4.3 to http://hl7.org/fhir/3.0 Group 1 Mapping from http://hl7.org/fhir/StructureDefinition/Measure|4.3.0 to http://hl7.org/fhir/StructureDefinition/Measure|3.0.2 Source Code Relationship Target Code Comment Measure.meta (meta) maps to wider concept Measure.meta Element `Measure.meta` is mapped to FHIR STU3 element `Measure.meta` as `SourceIsBroaderThanTarget`. The mappings for `Measure.meta` do not cover the following types: Meta. The mappings for `Measure.meta` do not cover the following types based on type expansion: lastUpdated, profile, security, source, tag, versionId. Measure.implicitRules (implicitRules) is equivalent to Measure.implicitRules Element `Measure.implicitRules` is mapped to FHIR STU3 element `Measure.implicitRules` as `Equivalent`. Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. Measure.language (language) is equivalent to Measure.language Element `Measure.language` is mapped to FHIR STU3 element `Measure.language` as `Equivalent`. Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute). Measure.text (text) maps to wider concept Measure.text Element `Measure.text` is mapped to FHIR STU3 element `Measure.text` as `SourceIsBroaderThanTarget`. The mappings for `Measure.text` do not cover the following types: Narrative. The mappings for `Measure.text` do not cover the following types based on type expansion: div, status. Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later. Measure.contained (contained) is equivalent to Measure.contained Element `Measure.contained` is mapped to FHIR STU3 element `Measure.contained` as `SourceIsBroaderThanTarget`. This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels. Measure.url (url) is equivalent to Measure.url Element `Measure.url` is mapped to FHIR STU3 element `Measure.url` as `Equivalent`. Can be a urn:uuid: or a urn:oid: but real http: addresses are preferred. Multiple instances may share the same URL if they have a distinct version. The determination of when to create a new version of a resource (same url, new version) vs. defining a new artifact is up to the author. Considerations for making this decision are found in [Technical and Business Versions](https://hl7.org/fhir/resource..html#versions). In some cases, the resource can no longer be found at the stated url, but the url itself cannot change. Implementations can use the [meta.source](https://hl7.org/fhir/resou.html#meta) element to indicate where the current master source of the resource can be found. Measure.identifier (identifier) maps to wider concept Measure.identifier Element `Measure.identifier` is mapped to FHIR STU3 element `Measure.identifier` as `SourceIsBroaderThanTarget`. The mappings for `Measure.identifier` do not cover the following types: Identifier. The mappings for `Measure.identifier` do not cover the following types based on type expansion: assigner, period, system, type, use, value. Typically, this is used for identifiers that can go in an HL7 V3 II (instance identifier) data type, and can then identify this measure outside of FHIR, where it is not possible to use the logical URI. Measure.version (version) is equivalent to Measure.version Element `Measure.version` is mapped to FHIR STU3 element `Measure.version` as `Equivalent`. There may be different measure instances that have the same identifier but different versions. The version can be appended to the url in a reference to allow a reference to a particular business version of the measure with the format [url]|[version]. Measure.name (name) is equivalent to Measure.name Element `Measure.name` is mapped to FHIR STU3 element `Measure.name` as `Equivalent`. The name is not expected to be globally unique. The name should be a simple alphanumeric type name to ensure that it is machine-processing friendly. Measure.title (title) is equivalent to Measure.title Element `Measure.title` is mapped to FHIR STU3 element `Measure.title` as `Equivalent`. This name does not need to be machine-processing friendly and may contain punctuation, white-space, etc. Measure.status (status) is equivalent to Measure.status Element `Measure.status` is mapped to FHIR STU3 element `Measure.status` as `Equivalent`. Allows filtering of measures that are appropriate for use versus not. Measure.experimental (experimental) is equivalent to Measure.experimental Element `Measure.experimental` is mapped to FHIR STU3 element `Measure.experimental` as `Equivalent`. Allows filtering of measures that are appropriate for use versus not. Measure.date (date) is equivalent to Measure.date Element `Measure.date` is mapped to FHIR STU3 element `Measure.date` as `Equivalent`. Note that this is not the same as the resource last-modified-date, since the resource may be a secondary representation of the measure. Additional specific dates may be added as extensions or be found by consulting Provenances associated with past versions of the resource. Measure.publisher (publisher) is equivalent to Measure.publisher Element `Measure.publisher` is mapped to FHIR STU3 element `Measure.publisher` as `Equivalent`. Usually an organization but may be an individual. The publisher (or steward) of the measure is the organization or individual primarily responsible for the maintenance and upkeep of the measure. This is not necessarily the same individual or organization that developed and initially authored the content. The publisher is the primary point of contact for questions or issues with the measure. This item SHOULD be populated unless the information is available from context. Measure.contact (contact) maps to wider concept Measure.contact Element `Measure.contact` is mapped to FHIR STU3 element `Measure.contact` as `SourceIsBroaderThanTarget`. The mappings for `Measure.contact` do not cover the following types: ContactDetail. The mappings for `Measure.contact` do not cover the following types based on type expansion: name, telecom. May be a web site, an email address, a telephone number, etc. Measure.description (description) is equivalent to Measure.description Element `Measure.description` is mapped to FHIR STU3 element `Measure.description` as `Equivalent`. This description can be used to capture details such as why the measure was built, comments about misuse, instructions for clinical use and interpretation, literature references, examples from the paper world, etc. It is not a rendering of the measure as conveyed in the 'text' field of the resource itself. This item SHOULD be populated unless the information is available from context (e.g. the language of the measure is presumed to be the predominant language in the place the measure was created). Measure.useContext (useContext) maps to wider concept Measure.useContext Element `Measure.useContext` is mapped to FHIR STU3 element `Measure.useContext` as `SourceIsBroaderThanTarget`. The mappings for `Measure.useContext` do not cover the following types: UsageContext. The mappings for `Measure.useContext` do not cover the following types based on type expansion: code, value[x]. When multiple useContexts are specified, there is no expectation that all or any of the contexts apply. Measure.jurisdiction (jurisdiction) is equivalent to Measure.jurisdiction Element `Measure.jurisdiction` is mapped to FHIR STU3 element `Measure.jurisdiction` as `Equivalent`. It may be possible for the measure to be used in jurisdictions other than those for which it was originally designed or intended. Measure.purpose (purpose) is equivalent to Measure.purpose Element `Measure.purpose` is mapped to FHIR STU3 element `Measure.purpose` as `Equivalent`. This element does not describe the usage of the measure. Instead, it provides traceability of ''why'' the resource is either needed or ''why'' it is defined as it is. This may be used to point to source materials or specifications that drove the structure of this measure. Measure.usage (usage) is equivalent to Measure.usage Element `Measure.usage` is mapped to FHIR STU3 element `Measure.usage` as `Equivalent`. Measure.copyright (copyright) is equivalent to Measure.copyright Element `Measure.copyright` is mapped to FHIR STU3 element `Measure.copyright` as `Equivalent`. Measure.approvalDate (approvalDate) is equivalent to Measure.approvalDate Element `Measure.approvalDate` is mapped to FHIR STU3 element `Measure.approvalDate` as `Equivalent`. The 'date' element may be more recent than the approval date because of minor changes or editorial corrections. Measure.lastReviewDate (lastReviewDate) is equivalent to Measure.lastReviewDate Element `Measure.lastReviewDate` is mapped to FHIR STU3 element `Measure.lastReviewDate` as `Equivalent`. If specified, this date follows the original approval date. Measure.effectivePeriod (effectivePeriod) maps to wider concept Measure.effectivePeriod Element `Measure.effectivePeriod` is mapped to FHIR STU3 element `Measure.effectivePeriod` as `SourceIsBroaderThanTarget`. The mappings for `Measure.effectivePeriod` do not cover the following types: Period. The mappings for `Measure.effectivePeriod` do not cover the following types based on type expansion: end, start. The effective period for a measure determines when the content is applicable for usage and is independent of publication and review dates. For example, a measure intended to be used for the year 2016 might be published in 2015. Measure.topic (topic) is equivalent to Measure.topic Element `Measure.topic` is mapped to FHIR STU3 element `Measure.topic` as `Equivalent`. Measure.author (author) maps to wider concept Measure.contributor Element `Measure.author` is mapped to FHIR STU3 element `Measure.contributor` as `SourceIsBroaderThanTarget`. The mappings for `Measure.author` do not cover the following types: ContactDetail. The mappings for `Measure.author` do not cover the following types based on type expansion: name, telecom. Measure.editor (editor) maps to wider concept Measure.contributor Element `Measure.editor` is mapped to FHIR STU3 element `Measure.contributor` as `SourceIsBroaderThanTarget`. The mappings for `Measure.editor` do not cover the following types: ContactDetail. The mappings for `Measure.editor` do not cover the following types based on type expansion: name, telecom. Measure.reviewer (reviewer) maps to wider concept Measure.contributor Element `Measure.reviewer` is mapped to FHIR STU3 element `Measure.contributor` as `SourceIsBroaderThanTarget`. The mappings for `Measure.reviewer` do not cover the following types: ContactDetail. The mappings for `Measure.reviewer` do not cover the following types based on type expansion: name, telecom. Measure.endorser (endorser) maps to wider concept Measure.contributor Element `Measure.endorser` is mapped to FHIR STU3 element `Measure.contributor` as `SourceIsBroaderThanTarget`. The mappings for `Measure.endorser` do not cover the following types: ContactDetail. The mappings for `Measure.endorser` do not cover the following types based on type expansion: name, telecom. Measure.relatedArtifact (relatedArtifact) maps to wider concept Measure.relatedArtifact Element `Measure.relatedArtifact` is mapped to FHIR STU3 element `Measure.relatedArtifact` as `SourceIsBroaderThanTarget`. The mappings for `Measure.relatedArtifact` do not cover the following types: RelatedArtifact. The mappings for `Measure.relatedArtifact` do not cover the following types based on type expansion: citation, display, document, label, resource, type, url. Each related artifact is either an attachment, or a reference to another resource, but not both. Measure.library (library) maps to wider concept Measure.library Element `Measure.library` is mapped to FHIR STU3 element `Measure.library` as `SourceIsBroaderThanTarget`. The mappings for `Measure.library` do not cover the following types: canonical. The mappings for `Measure.library` do not cover the following types based on type expansion: value. Measure.disclaimer (disclaimer) is equivalent to Measure.disclaimer Element `Measure.disclaimer` is mapped to FHIR STU3 element `Measure.disclaimer` as `Equivalent`. Measure.scoring (scoring) is equivalent to Measure.scoring Element `Measure.scoring` is mapped to FHIR STU3 element `Measure.scoring` as `Equivalent`. Measure.compositeScoring (compositeScoring) is equivalent to Measure.compositeScoring Element `Measure.compositeScoring` is mapped to FHIR STU3 element `Measure.compositeScoring` as `Equivalent`. Measure.type (type) is equivalent to Measure.type Element `Measure.type` is mapped to FHIR STU3 element `Measure.type` as `Equivalent`. Measure.riskAdjustment (riskAdjustment) is equivalent to Measure.riskAdjustment Element `Measure.riskAdjustment` is mapped to FHIR STU3 element `Measure.riskAdjustment` as `Equivalent`. Describes the method of adjusting for clinical severity and conditions present at the start of care that can influence patient outcomes for making valid comparisons of outcome measures across providers. Indicates whether a measure is subject to the statistical process for reducing, removing, or clarifying the influences of confounding factors to allow for more useful comparisons. Measure.rateAggregation (rateAggregation) is equivalent to Measure.rateAggregation Element `Measure.rateAggregation` is mapped to FHIR STU3 element `Measure.rateAggregation` as `Equivalent`. The measure rate for an organization or clinician is based upon the entities’ aggregate data and summarizes the performance of the entity over a given time period (e.g., monthly, quarterly, yearly). The aggregated data are derived from the results of a specific measure algorithm and, if appropriate, the application of specific risk adjustment models. Can also be used to describe how to risk adjust the data based on supplemental data elements described in the eMeasure (e.g., pneumonia hospital measures antibiotic selection in the ICU versus non-ICU and then the roll-up of the two). This could be applied to aggregated cohort measure definitions (e.g., CDC's aggregate reporting for TB at the state level). Measure.rationale (rationale) is equivalent to Measure.rationale Element `Measure.rationale` is mapped to FHIR STU3 element `Measure.rationale` as `Equivalent`. Measure.clinicalRecommendationStatement (clinicalRecommendationStatement) is equivalent to Measure.clinicalRecommendationStatement Element `Measure.clinicalRecommendationStatement` is mapped to FHIR STU3 element `Measure.clinicalRecommendationStatement` as `Equivalent`. Measure.improvementNotation (improvementNotation) maps to wider concept Measure.improvementNotation Element `Measure.improvementNotation` is mapped to FHIR STU3 element `Measure.improvementNotation` as `SourceIsBroaderThanTarget`. The mappings for `Measure.improvementNotation` do not cover the following types: CodeableConcept. The mappings for `Measure.improvementNotation` do not cover the following types based on type expansion: coding. Measure.definition (definition) is equivalent to Measure.definition Element `Measure.definition` is mapped to FHIR STU3 element `Measure.definition` as `Equivalent`. Measure.guidance (guidance) is equivalent to Measure.guidance Element `Measure.guidance` is mapped to FHIR STU3 element `Measure.guidance` as `Equivalent`. Measure.group (group) maps to wider concept Measure.group Element `Measure.group` is mapped to FHIR STU3 element `Measure.group` as `Equivalent`. Measure.group.code (code) maps to wider concept Measure.group.identifier Element `Measure.group.code` is mapped to FHIR STU3 element `Measure.group.identifier` as `SourceIsBroaderThanTarget`. The mappings for `Measure.group.code` do not cover the following types: CodeableConcept. The mappings for `Measure.group.code` do not cover the following types based on type expansion: coding, text. Measure.group.description (description) is equivalent to Measure.group.description Element `Measure.group.description` is mapped to FHIR STU3 element `Measure.group.description` as `Equivalent`. Measure.group.population (population) maps to wider concept Measure.group.population Element `Measure.group.population` is mapped to FHIR STU3 element `Measure.group.population` as `Equivalent`. Measure.group.population.code (code) is equivalent to Measure.group.population.code Element `Measure.group.population.code` is mapped to FHIR STU3 element `Measure.group.population.code` as `Equivalent`. Measure.group.population.description (description) is equivalent to Measure.group.population.description Element `Measure.group.population.description` is mapped to FHIR STU3 element `Measure.group.population.description` as `Equivalent`. Measure.group.population.criteria (criteria) is equivalent to Measure.group.population.criteria Element `Measure.group.population.criteria` is mapped to FHIR STU3 element `Measure.group.population.criteria` as `SourceIsBroaderThanTarget`. In the case of a continuous-variable or ratio measure, this may be the name of a function that calculates the value of the individual observation for each patient or event in the population. For these types of measures, individual observations are reported as observation resources included in the evaluatedResources bundle for each patient. See the MeasureReport resource or the Quality Reporting topic for more information. Measure.group.stratifier (stratifier) maps to wider concept Measure.group.stratifier Element `Measure.group.stratifier` is mapped to FHIR STU3 element `Measure.group.stratifier` as `Equivalent`. Measure.group.stratifier.code (code) maps to wider concept Measure.group.stratifier.identifier Element `Measure.group.stratifier.code` is mapped to FHIR STU3 element `Measure.group.stratifier.identifier` as `SourceIsBroaderThanTarget`. The mappings for `Measure.group.stratifier.code` do not cover the following types: CodeableConcept. The mappings for `Measure.group.stratifier.code` do not cover the following types based on type expansion: coding, text. Measure.group.stratifier.criteria (criteria) is equivalent to Measure.group.stratifier.criteria Element `Measure.group.stratifier.criteria` is mapped to FHIR STU3 element `Measure.group.stratifier.criteria` as `SourceIsBroaderThanTarget`. Measure.supplementalData (supplementalData) maps to wider concept Measure.supplementalData Element `Measure.supplementalData` is mapped to FHIR STU3 element `Measure.supplementalData` as `Equivalent`. Note that supplemental data are reported as observations for each patient and included in the evaluatedResources bundle. See the MeasureReport resource or the Quality Reporting topic for more information. Measure.supplementalData.code (code) maps to wider concept Measure.supplementalData.identifier Element `Measure.supplementalData.code` is mapped to FHIR STU3 element `Measure.supplementalData.identifier` as `SourceIsBroaderThanTarget`. The mappings for `Measure.supplementalData.code` do not cover the following types: CodeableConcept. The mappings for `Measure.supplementalData.code` do not cover the following types based on type expansion: coding, text. Measure.supplementalData.usage (usage) is equivalent to Measure.supplementalData.usage Element `Measure.supplementalData.usage` is mapped to FHIR STU3 element `Measure.supplementalData.usage` as `Equivalent`. Measure.supplementalData.criteria (criteria) is equivalent to Measure.supplementalData.criteria Element `Measure.supplementalData.criteria` is mapped to FHIR STU3 element `Measure.supplementalData.criteria` as `SourceIsBroaderThanTarget`. Group 2 Mapping from http://hl7.org/fhir/StructureDefinition/Measure|4.3.0 to R4B: meta additional typesversion: 0.1.0) Source Code Relationship Target Code Comment Measure.meta (meta) is equivalent to Extension (R4B: meta additional types) Element `Measure.meta` is mapped to FHIR STU3 element `Measure.meta` as `SourceIsBroaderThanTarget`. The mappings for `Measure.meta` do not cover the following types: Meta. The mappings for `Measure.meta` do not cover the following types based on type expansion: lastUpdated, profile, security, source, tag, versionId. Group 3 Mapping from http://hl7.org/fhir/StructureDefinition/Measure|4.3.0 to R4B: text additional typesversion: 0.1.0) Source Code Relationship Target Code Comment Measure.text (text) is equivalent to Extension (R4B: text additional types) Element `Measure.text` is mapped to FHIR STU3 element `Measure.text` as `SourceIsBroaderThanTarget`. The mappings for `Measure.text` do not cover the following types: Narrative. The mappings for `Measure.text` do not cover the following types based on type expansion: div, status. Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later. Group 4 Mapping from http://hl7.org/fhir/StructureDefinition/Measure|4.3.0 to R4B: identifier additional typesversion: 0.1.0) Source Code Relationship Target Code Comment Measure.identifier (identifier) is equivalent to Extension (R4B: identifier additional types) Element `Measure.identifier` is mapped to FHIR STU3 element `Measure.identifier` as `SourceIsBroaderThanTarget`. The mappings for `Measure.identifier` do not cover the following types: Identifier. The mappings for `Measure.identifier` do not cover the following types based on type expansion: assigner, period, system, type, use, value. Typically, this is used for identifiers that can go in an HL7 V3 II (instance identifier) data type, and can then identify this measure outside of FHIR, where it is not possible to use the logical URI. Group 5 Mapping from http://hl7.org/fhir/StructureDefinition/Measure|4.3.0 to R4B: Subordinate title of the measure (new)version: 0.1.0) Source Code Relationship Target Code Comment Measure.subtitle (subtitle) is equivalent to Extension (R4B: Subordinate title of the measure (new)) Element `Measure.subtitle` has a context of Measure based on following the parent source element upwards and mapping to `Measure`. Element `Measure.subtitle` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Group 6 Mapping from http://hl7.org/fhir/StructureDefinition/Measure|4.3.0 to R4B: E.g. Patient, Practitioner, RelatedPerson, Organization, Location, Device (new)version: 0.1.0) Source Code Relationship Target Code Comment Measure.subject[x] (subject[x]) is equivalent to Extension (R4B: E.g. Patient, Practitioner, RelatedPerson, Organization, Location, Device (new)) Element `Measure.subject[x]` has a context of Measure based on following the parent source element upwards and mapping to `Measure`. Element `Measure.subject[x]` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). The subject of the measure is critical in interpreting the criteria definitions, as the logic in the measures is evaluated with respect to a particular subject. This corresponds roughly to the notion of a Compartment in that it limits what content is available based on its relationship to the subject. In CQL, this corresponds to the context declaration. Group 7 Mapping from http://hl7.org/fhir/StructureDefinition/Measure|4.3.0 to R4B: contact additional typesversion: 0.1.0) Source Code Relationship Target Code Comment Measure.contact (contact) is equivalent to Extension (R4B: contact additional types) Element `Measure.contact` is mapped to FHIR STU3 element `Measure.contact` as `SourceIsBroaderThanTarget`. The mappings for `Measure.contact` do not cover the following types: ContactDetail. The mappings for `Measure.contact` do not cover the following types based on type expansion: name, telecom. May be a web site, an email address, a telephone number, etc. Group 8 Mapping from http://hl7.org/fhir/StructureDefinition/Measure|4.3.0 to R4B: The context that the content is intended to support additional typesversion: 0.1.0) Source Code Relationship Target Code Comment Measure.useContext (useContext) is equivalent to Extension (R4B: The context that the content is intended to support additional types) Element `Measure.useContext` is mapped to FHIR STU3 element `Measure.useContext` as `SourceIsBroaderThanTarget`. The mappings for `Measure.useContext` do not cover the following types: UsageContext. The mappings for `Measure.useContext` do not cover the following types based on type expansion: code, value[x]. When multiple useContexts are specified, there is no expectation that all or any of the contexts apply. Group 9 Mapping from http://hl7.org/fhir/StructureDefinition/Measure|4.3.0 to R4B: effectivePeriod additional typesversion: 0.1.0) Source Code Relationship Target Code Comment Measure.effectivePeriod (effectivePeriod) is equivalent to Extension (R4B: effectivePeriod additional types) Element `Measure.effectivePeriod` is mapped to FHIR STU3 element `Measure.effectivePeriod` as `SourceIsBroaderThanTarget`. The mappings for `Measure.effectivePeriod` do not cover the following types: Period. The mappings for `Measure.effectivePeriod` do not cover the following types based on type expansion: end, start. The effective period for a measure determines when the content is applicable for usage and is independent of publication and review dates. For example, a measure intended to be used for the year 2016 might be published in 2015. Group 10 Mapping from http://hl7.org/fhir/StructureDefinition/Measure|4.3.0 to R4B: Who authored the content additional typesversion: 0.1.0) Source Code Relationship Target Code Comment Measure.author (author) maps to wider concept Extension (R4B: Who authored the content additional types) Element `Measure.author` is mapped to FHIR STU3 element `Measure.contributor` as `SourceIsBroaderThanTarget`. The mappings for `Measure.author` do not cover the following types: ContactDetail. The mappings for `Measure.author` do not cover the following types based on type expansion: name, telecom. Group 11 Mapping from http://hl7.org/fhir/StructureDefinition/Measure|4.3.0 to R4B: Who edited the content additional typesversion: 0.1.0) Source Code Relationship Target Code Comment Measure.editor (editor) maps to wider concept Extension (R4B: Who edited the content additional types) Element `Measure.editor` is mapped to FHIR STU3 element `Measure.contributor` as `SourceIsBroaderThanTarget`. The mappings for `Measure.editor` do not cover the following types: ContactDetail. The mappings for `Measure.editor` do not cover the following types based on type expansion: name, telecom. Group 12 Mapping from http://hl7.org/fhir/StructureDefinition/Measure|4.3.0 to R4B: Who reviewed the content additional typesversion: 0.1.0) Source Code Relationship Target Code Comment Measure.reviewer (reviewer) maps to wider concept Extension (R4B: Who reviewed the content additional types) Element `Measure.reviewer` is mapped to FHIR STU3 element `Measure.contributor` as `SourceIsBroaderThanTarget`. The mappings for `Measure.reviewer` do not cover the following types: ContactDetail. The mappings for `Measure.reviewer` do not cover the following types based on type expansion: name, telecom. Group 13 Mapping from http://hl7.org/fhir/StructureDefinition/Measure|4.3.0 to R4B: Who endorsed the content additional typesversion: 0.1.0) Source Code Relationship Target Code Comment Measure.endorser (endorser) maps to wider concept Extension (R4B: Who endorsed the content additional types) Element `Measure.endorser` is mapped to FHIR STU3 element `Measure.contributor` as `SourceIsBroaderThanTarget`. The mappings for `Measure.endorser` do not cover the following types: ContactDetail. The mappings for `Measure.endorser` do not cover the following types based on type expansion: name, telecom. Group 14 Mapping from http://hl7.org/fhir/StructureDefinition/Measure|4.3.0 to R4B: Additional documentation, citations, etc. additional typesversion: 0.1.0) Source Code Relationship Target Code Comment Measure.relatedArtifact (relatedArtifact) is equivalent to Extension (R4B: Additional documentation, citations, etc. additional types) Element `Measure.relatedArtifact` is mapped to FHIR STU3 element `Measure.relatedArtifact` as `SourceIsBroaderThanTarget`. The mappings for `Measure.relatedArtifact` do not cover the following types: RelatedArtifact. The mappings for `Measure.relatedArtifact` do not cover the following types based on type expansion: citation, display, document, label, resource, type, url. Each related artifact is either an attachment, or a reference to another resource, but not both. Group 15 Mapping from http://hl7.org/fhir/StructureDefinition/Measure|4.3.0 to R4B: library additional typesversion: 0.1.0) Source Code Relationship Target Code Comment Measure.library (library) is equivalent to Extension (R4B: library additional types) Element `Measure.library` is mapped to FHIR STU3 element `Measure.library` as `SourceIsBroaderThanTarget`. The mappings for `Measure.library` do not cover the following types: canonical. The mappings for `Measure.library` do not cover the following types based on type expansion: value. Group 16 Mapping from http://hl7.org/fhir/StructureDefinition/Measure|4.3.0 to R4B: increase | decrease additional typesversion: 0.1.0) Source Code Relationship Target Code Comment Measure.improvementNotation (improvementNotation) is equivalent to Extension (R4B: increase | decrease additional types) Element `Measure.improvementNotation` is mapped to FHIR STU3 element `Measure.improvementNotation` as `SourceIsBroaderThanTarget`. The mappings for `Measure.improvementNotation` do not cover the following types: CodeableConcept. The mappings for `Measure.improvementNotation` do not cover the following types based on type expansion: coding. Group 17 Mapping from http://hl7.org/fhir/StructureDefinition/Measure|4.3.0 to R4B: Meaning of the group additional typesversion: 0.1.0) Source Code Relationship Target Code Comment Measure.group.code (code) maps to wider concept Extension (R4B: Meaning of the group additional types) Element `Measure.group.code` is mapped to FHIR STU3 element `Measure.group.identifier` as `SourceIsBroaderThanTarget`. The mappings for `Measure.group.code` do not cover the following types: CodeableConcept. The mappings for `Measure.group.code` do not cover the following types based on type expansion: coding, text. Group 18 Mapping from http://hl7.org/fhir/StructureDefinition/Measure|4.3.0 to R4B: Meaning of the stratifier additional typesversion: 0.1.0) Source Code Relationship Target Code Comment Measure.group.stratifier.code (code) maps to wider concept Extension (R4B: Meaning of the stratifier additional types) Element `Measure.group.stratifier.code` is mapped to FHIR STU3 element `Measure.group.stratifier.identifier` as `SourceIsBroaderThanTarget`. The mappings for `Measure.group.stratifier.code` do not cover the following types: CodeableConcept. The mappings for `Measure.group.stratifier.code` do not cover the following types based on type expansion: coding, text. Group 19 Mapping from http://hl7.org/fhir/StructureDefinition/Measure|4.3.0 to R4B: The human readable description of this stratifier (new)version: 0.1.0) Source Code Relationship Target Code Comment Measure.group.stratifier.description (description) is equivalent to Extension (R4B: The human readable description of this stratifier (new)) Element `Measure.group.stratifier.description` has a context of Measure.group.stratifier based on following the parent source element upwards and mapping to `Measure`. Element `Measure.group.stratifier.description` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Group 20 Mapping from http://hl7.org/fhir/StructureDefinition/Measure|4.3.0 to R4B: Stratifier criteria component for the measure (new)version: 0.1.0) Source Code Relationship Target Code Comment Measure.group.stratifier.component (component) is equivalent to Extension (R4B: Stratifier criteria component for the measure (new)) Element `Measure.group.stratifier.component` has a context of Measure.group.stratifier based on following the parent source element upwards and mapping to `Measure`. Element `Measure.group.stratifier.component` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Stratifiers are defined either as a single criteria, or as a set of component criteria. Measure.group.stratifier.component.code (code) is equivalent to Extension.extension:code (R4B: Meaning of the stratifier component (new)) Element `Measure.group.stratifier.component.code` is part of an existing definition because parent element `Measure.group.stratifier.component` requires a cross-version extension. Element `Measure.group.stratifier.component.code` has a context of Measure.group.stratifier based on following the parent source element upwards and mapping to `Measure`. Element `Measure.group.stratifier.component.code` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Measure.group.stratifier.component.description (description) is equivalent to Extension.extension:description (R4B: The human readable description of this stratifier component (new)) Element `Measure.group.stratifier.component.description` is part of an existing definition because parent element `Measure.group.stratifier.component` requires a cross-version extension. Element `Measure.group.stratifier.component.description` has a context of Measure.group.stratifier based on following the parent source element upwards and mapping to `Measure`. Element `Measure.group.stratifier.component.description` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Measure.group.stratifier.component.criteria (criteria) is equivalent to Extension.extension:criteria (R4B: Component of how the measure should be stratified (new)) Element `Measure.group.stratifier.component.criteria` is part of an existing definition because parent element `Measure.group.stratifier.component` requires a cross-version extension. Element `Measure.group.stratifier.component.criteria` has a context of Measure.group.stratifier based on following the parent source element upwards and mapping to `Measure`. Element `Measure.group.stratifier.component.criteria` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Group 21 Mapping from http://hl7.org/fhir/StructureDefinition/Measure|4.3.0 to R4B: Meaning of the supplemental data additional typesversion: 0.1.0) Source Code Relationship Target Code Comment Measure.supplementalData.code (code) maps to wider concept Extension (R4B: Meaning of the supplemental data additional types) Element `Measure.supplementalData.code` is mapped to FHIR STU3 element `Measure.supplementalData.identifier` as `SourceIsBroaderThanTarget`. The mappings for `Measure.supplementalData.code` do not cover the following types: CodeableConcept. The mappings for `Measure.supplementalData.code` do not cover the following types based on type expansion: coding, text. Group 22 Mapping from http://hl7.org/fhir/StructureDefinition/Measure|4.3.0 to R4B: The human readable description of this supplemental data (new)version: 0.1.0) Source Code Relationship Target Code Comment Measure.supplementalData.description (description) is equivalent to Extension (R4B: The human readable description of this supplemental data (new)) Element `Measure.supplementalData.description` has a context of Measure.supplementalData based on following the parent source element upwards and mapping to `Measure`. Element `Measure.supplementalData.description` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Cross-version mapping for FHIR R4B Measure to FHIR STU3 Measure
This ConceptMap represents cross-version mappings for elements from a FHIR R4B Measure to FHIR STU3.
Element `Measure.meta` is mapped to FHIR STU3 element `Measure.meta` as `SourceIsBroaderThanTarget`. The mappings for `Measure.meta` do not cover the following types: Meta. The mappings for `Measure.meta` do not cover the following types based on type expansion: lastUpdated, profile, security, source, tag, versionId.
Element `Measure.implicitRules` is mapped to FHIR STU3 element `Measure.implicitRules` as `Equivalent`. Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.
Element `Measure.language` is mapped to FHIR STU3 element `Measure.language` as `Equivalent`. Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).
Element `Measure.text` is mapped to FHIR STU3 element `Measure.text` as `SourceIsBroaderThanTarget`. The mappings for `Measure.text` do not cover the following types: Narrative. The mappings for `Measure.text` do not cover the following types based on type expansion: div, status. Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.
Element `Measure.contained` is mapped to FHIR STU3 element `Measure.contained` as `SourceIsBroaderThanTarget`. This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.
Element `Measure.url` is mapped to FHIR STU3 element `Measure.url` as `Equivalent`. Can be a urn:uuid: or a urn:oid: but real http: addresses are preferred. Multiple instances may share the same URL if they have a distinct version. The determination of when to create a new version of a resource (same url, new version) vs. defining a new artifact is up to the author. Considerations for making this decision are found in [Technical and Business Versions](https://hl7.org/fhir/resource..html#versions). In some cases, the resource can no longer be found at the stated url, but the url itself cannot change. Implementations can use the [meta.source](https://hl7.org/fhir/resou.html#meta) element to indicate where the current master source of the resource can be found.
Element `Measure.identifier` is mapped to FHIR STU3 element `Measure.identifier` as `SourceIsBroaderThanTarget`. The mappings for `Measure.identifier` do not cover the following types: Identifier. The mappings for `Measure.identifier` do not cover the following types based on type expansion: assigner, period, system, type, use, value. Typically, this is used for identifiers that can go in an HL7 V3 II (instance identifier) data type, and can then identify this measure outside of FHIR, where it is not possible to use the logical URI.
Element `Measure.version` is mapped to FHIR STU3 element `Measure.version` as `Equivalent`. There may be different measure instances that have the same identifier but different versions. The version can be appended to the url in a reference to allow a reference to a particular business version of the measure with the format [url]|[version].
Element `Measure.name` is mapped to FHIR STU3 element `Measure.name` as `Equivalent`. The name is not expected to be globally unique. The name should be a simple alphanumeric type name to ensure that it is machine-processing friendly.
Element `Measure.title` is mapped to FHIR STU3 element `Measure.title` as `Equivalent`. This name does not need to be machine-processing friendly and may contain punctuation, white-space, etc.
Element `Measure.status` is mapped to FHIR STU3 element `Measure.status` as `Equivalent`. Allows filtering of measures that are appropriate for use versus not.
Element `Measure.experimental` is mapped to FHIR STU3 element `Measure.experimental` as `Equivalent`. Allows filtering of measures that are appropriate for use versus not.
Element `Measure.date` is mapped to FHIR STU3 element `Measure.date` as `Equivalent`. Note that this is not the same as the resource last-modified-date, since the resource may be a secondary representation of the measure. Additional specific dates may be added as extensions or be found by consulting Provenances associated with past versions of the resource.
Element `Measure.publisher` is mapped to FHIR STU3 element `Measure.publisher` as `Equivalent`. Usually an organization but may be an individual. The publisher (or steward) of the measure is the organization or individual primarily responsible for the maintenance and upkeep of the measure. This is not necessarily the same individual or organization that developed and initially authored the content. The publisher is the primary point of contact for questions or issues with the measure. This item SHOULD be populated unless the information is available from context.
Element `Measure.contact` is mapped to FHIR STU3 element `Measure.contact` as `SourceIsBroaderThanTarget`. The mappings for `Measure.contact` do not cover the following types: ContactDetail. The mappings for `Measure.contact` do not cover the following types based on type expansion: name, telecom. May be a web site, an email address, a telephone number, etc.
Element `Measure.description` is mapped to FHIR STU3 element `Measure.description` as `Equivalent`. This description can be used to capture details such as why the measure was built, comments about misuse, instructions for clinical use and interpretation, literature references, examples from the paper world, etc. It is not a rendering of the measure as conveyed in the 'text' field of the resource itself. This item SHOULD be populated unless the information is available from context (e.g. the language of the measure is presumed to be the predominant language in the place the measure was created).
Element `Measure.useContext` is mapped to FHIR STU3 element `Measure.useContext` as `SourceIsBroaderThanTarget`. The mappings for `Measure.useContext` do not cover the following types: UsageContext. The mappings for `Measure.useContext` do not cover the following types based on type expansion: code, value[x]. When multiple useContexts are specified, there is no expectation that all or any of the contexts apply.
Element `Measure.jurisdiction` is mapped to FHIR STU3 element `Measure.jurisdiction` as `Equivalent`. It may be possible for the measure to be used in jurisdictions other than those for which it was originally designed or intended.
Element `Measure.purpose` is mapped to FHIR STU3 element `Measure.purpose` as `Equivalent`. This element does not describe the usage of the measure. Instead, it provides traceability of ''why'' the resource is either needed or ''why'' it is defined as it is. This may be used to point to source materials or specifications that drove the structure of this measure.
Element `Measure.usage` is mapped to FHIR STU3 element `Measure.usage` as `Equivalent`.
Element `Measure.copyright` is mapped to FHIR STU3 element `Measure.copyright` as `Equivalent`.
Element `Measure.approvalDate` is mapped to FHIR STU3 element `Measure.approvalDate` as `Equivalent`. The 'date' element may be more recent than the approval date because of minor changes or editorial corrections.
Element `Measure.lastReviewDate` is mapped to FHIR STU3 element `Measure.lastReviewDate` as `Equivalent`. If specified, this date follows the original approval date.
Element `Measure.effectivePeriod` is mapped to FHIR STU3 element `Measure.effectivePeriod` as `SourceIsBroaderThanTarget`. The mappings for `Measure.effectivePeriod` do not cover the following types: Period. The mappings for `Measure.effectivePeriod` do not cover the following types based on type expansion: end, start. The effective period for a measure determines when the content is applicable for usage and is independent of publication and review dates. For example, a measure intended to be used for the year 2016 might be published in 2015.
Element `Measure.topic` is mapped to FHIR STU3 element `Measure.topic` as `Equivalent`.
Element `Measure.author` is mapped to FHIR STU3 element `Measure.contributor` as `SourceIsBroaderThanTarget`. The mappings for `Measure.author` do not cover the following types: ContactDetail. The mappings for `Measure.author` do not cover the following types based on type expansion: name, telecom.
Element `Measure.editor` is mapped to FHIR STU3 element `Measure.contributor` as `SourceIsBroaderThanTarget`. The mappings for `Measure.editor` do not cover the following types: ContactDetail. The mappings for `Measure.editor` do not cover the following types based on type expansion: name, telecom.
Element `Measure.reviewer` is mapped to FHIR STU3 element `Measure.contributor` as `SourceIsBroaderThanTarget`. The mappings for `Measure.reviewer` do not cover the following types: ContactDetail. The mappings for `Measure.reviewer` do not cover the following types based on type expansion: name, telecom.
Element `Measure.endorser` is mapped to FHIR STU3 element `Measure.contributor` as `SourceIsBroaderThanTarget`. The mappings for `Measure.endorser` do not cover the following types: ContactDetail. The mappings for `Measure.endorser` do not cover the following types based on type expansion: name, telecom.
Element `Measure.relatedArtifact` is mapped to FHIR STU3 element `Measure.relatedArtifact` as `SourceIsBroaderThanTarget`. The mappings for `Measure.relatedArtifact` do not cover the following types: RelatedArtifact. The mappings for `Measure.relatedArtifact` do not cover the following types based on type expansion: citation, display, document, label, resource, type, url. Each related artifact is either an attachment, or a reference to another resource, but not both.
Element `Measure.library` is mapped to FHIR STU3 element `Measure.library` as `SourceIsBroaderThanTarget`. The mappings for `Measure.library` do not cover the following types: canonical. The mappings for `Measure.library` do not cover the following types based on type expansion: value.
Element `Measure.disclaimer` is mapped to FHIR STU3 element `Measure.disclaimer` as `Equivalent`.
Element `Measure.scoring` is mapped to FHIR STU3 element `Measure.scoring` as `Equivalent`.
Element `Measure.compositeScoring` is mapped to FHIR STU3 element `Measure.compositeScoring` as `Equivalent`.
Element `Measure.type` is mapped to FHIR STU3 element `Measure.type` as `Equivalent`.
Element `Measure.riskAdjustment` is mapped to FHIR STU3 element `Measure.riskAdjustment` as `Equivalent`. Describes the method of adjusting for clinical severity and conditions present at the start of care that can influence patient outcomes for making valid comparisons of outcome measures across providers. Indicates whether a measure is subject to the statistical process for reducing, removing, or clarifying the influences of confounding factors to allow for more useful comparisons.
Element `Measure.rateAggregation` is mapped to FHIR STU3 element `Measure.rateAggregation` as `Equivalent`. The measure rate for an organization or clinician is based upon the entities’ aggregate data and summarizes the performance of the entity over a given time period (e.g., monthly, quarterly, yearly). The aggregated data are derived from the results of a specific measure algorithm and, if appropriate, the application of specific risk adjustment models. Can also be used to describe how to risk adjust the data based on supplemental data elements described in the eMeasure (e.g., pneumonia hospital measures antibiotic selection in the ICU versus non-ICU and then the roll-up of the two). This could be applied to aggregated cohort measure definitions (e.g., CDC's aggregate reporting for TB at the state level).
Element `Measure.rationale` is mapped to FHIR STU3 element `Measure.rationale` as `Equivalent`.
Element `Measure.clinicalRecommendationStatement` is mapped to FHIR STU3 element `Measure.clinicalRecommendationStatement` as `Equivalent`.
Element `Measure.improvementNotation` is mapped to FHIR STU3 element `Measure.improvementNotation` as `SourceIsBroaderThanTarget`. The mappings for `Measure.improvementNotation` do not cover the following types: CodeableConcept. The mappings for `Measure.improvementNotation` do not cover the following types based on type expansion: coding.
Element `Measure.definition` is mapped to FHIR STU3 element `Measure.definition` as `Equivalent`.
Element `Measure.guidance` is mapped to FHIR STU3 element `Measure.guidance` as `Equivalent`.
Element `Measure.group` is mapped to FHIR STU3 element `Measure.group` as `Equivalent`.
Element `Measure.group.code` is mapped to FHIR STU3 element `Measure.group.identifier` as `SourceIsBroaderThanTarget`. The mappings for `Measure.group.code` do not cover the following types: CodeableConcept. The mappings for `Measure.group.code` do not cover the following types based on type expansion: coding, text.
Element `Measure.group.description` is mapped to FHIR STU3 element `Measure.group.description` as `Equivalent`.
Element `Measure.group.population` is mapped to FHIR STU3 element `Measure.group.population` as `Equivalent`.
Element `Measure.group.population.code` is mapped to FHIR STU3 element `Measure.group.population.code` as `Equivalent`.
Element `Measure.group.population.description` is mapped to FHIR STU3 element `Measure.group.population.description` as `Equivalent`.
Element `Measure.group.population.criteria` is mapped to FHIR STU3 element `Measure.group.population.criteria` as `SourceIsBroaderThanTarget`. In the case of a continuous-variable or ratio measure, this may be the name of a function that calculates the value of the individual observation for each patient or event in the population. For these types of measures, individual observations are reported as observation resources included in the evaluatedResources bundle for each patient. See the MeasureReport resource or the Quality Reporting topic for more information.
Element `Measure.group.stratifier` is mapped to FHIR STU3 element `Measure.group.stratifier` as `Equivalent`.
Element `Measure.group.stratifier.code` is mapped to FHIR STU3 element `Measure.group.stratifier.identifier` as `SourceIsBroaderThanTarget`. The mappings for `Measure.group.stratifier.code` do not cover the following types: CodeableConcept. The mappings for `Measure.group.stratifier.code` do not cover the following types based on type expansion: coding, text.
Element `Measure.group.stratifier.criteria` is mapped to FHIR STU3 element `Measure.group.stratifier.criteria` as `SourceIsBroaderThanTarget`.
Element `Measure.supplementalData` is mapped to FHIR STU3 element `Measure.supplementalData` as `Equivalent`. Note that supplemental data are reported as observations for each patient and included in the evaluatedResources bundle. See the MeasureReport resource or the Quality Reporting topic for more information.
Element `Measure.supplementalData.code` is mapped to FHIR STU3 element `Measure.supplementalData.identifier` as `SourceIsBroaderThanTarget`. The mappings for `Measure.supplementalData.code` do not cover the following types: CodeableConcept. The mappings for `Measure.supplementalData.code` do not cover the following types based on type expansion: coding, text.
Element `Measure.supplementalData.usage` is mapped to FHIR STU3 element `Measure.supplementalData.usage` as `Equivalent`.
Element `Measure.supplementalData.criteria` is mapped to FHIR STU3 element `Measure.supplementalData.criteria` as `SourceIsBroaderThanTarget`.
Element `Measure.subtitle` has a context of Measure based on following the parent source element upwards and mapping to `Measure`. Element `Measure.subtitle` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Element `Measure.subject[x]` has a context of Measure based on following the parent source element upwards and mapping to `Measure`. Element `Measure.subject[x]` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). The subject of the measure is critical in interpreting the criteria definitions, as the logic in the measures is evaluated with respect to a particular subject. This corresponds roughly to the notion of a Compartment in that it limits what content is available based on its relationship to the subject. In CQL, this corresponds to the context declaration.
Element `Measure.group.stratifier.description` has a context of Measure.group.stratifier based on following the parent source element upwards and mapping to `Measure`. Element `Measure.group.stratifier.description` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Element `Measure.group.stratifier.component` has a context of Measure.group.stratifier based on following the parent source element upwards and mapping to `Measure`. Element `Measure.group.stratifier.component` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Stratifiers are defined either as a single criteria, or as a set of component criteria.
Element `Measure.group.stratifier.component.code` is part of an existing definition because parent element `Measure.group.stratifier.component` requires a cross-version extension. Element `Measure.group.stratifier.component.code` has a context of Measure.group.stratifier based on following the parent source element upwards and mapping to `Measure`. Element `Measure.group.stratifier.component.code` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Element `Measure.group.stratifier.component.description` is part of an existing definition because parent element `Measure.group.stratifier.component` requires a cross-version extension. Element `Measure.group.stratifier.component.description` has a context of Measure.group.stratifier based on following the parent source element upwards and mapping to `Measure`. Element `Measure.group.stratifier.component.description` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Element `Measure.group.stratifier.component.criteria` is part of an existing definition because parent element `Measure.group.stratifier.component` requires a cross-version extension. Element `Measure.group.stratifier.component.criteria` has a context of Measure.group.stratifier based on following the parent source element upwards and mapping to `Measure`. Element `Measure.group.stratifier.component.criteria` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Element `Measure.supplementalData.description` has a context of Measure.supplementalData based on following the parent source element upwards and mapping to `Measure`. Element `Measure.supplementalData.description` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).