Extensions for Using Data Elements from FHIR R4 in FHIR R5
0.1.0 - STU International flag

Extensions for Using Data Elements from FHIR R4 in FHIR R5 - Downloaded Version null See the Directory of published versions

ValueSet: R4V3EntityNamePartQualifierR2ForR5

Official URL: http://hl7.org/fhir/uv/xver/ValueSet/R4-v3-EntityNamePartQualifierR2-for-R5 Version: 0.1.0
Standards status: Trial-use Maturity Level: 0 Responsible: HL7 International / Terminology Infrastructure Computable Name: R4V3EntityNamePartQualifierR2ForR5

This cross-version ValueSet represents content from http://terminology.hl7.org/ValueSet/v3-EntityNamePartQualifierR2|2018-08-12 for use in FHIR R5.

This value set is part of the cross-version definitions generated to enable use of the value set http://terminology.hl7.org/ValueSet/v3-EntityNamePartQualifierR2|2018-08-12 as defined in FHIR R4 in FHIR R5.

The source value set is bound to the following FHIR R4 elements:

Note that all concepts are included in this cross-version definition because no concepts have compatible representations

Following are the generation technical comments:

FHIR ValueSet http://terminology.hl7.org/ValueSet/v3-EntityNamePartQualifierR2|2018-08-12, defined in FHIR R4 does not have any mapping to FHIR R5

References

This value set is not used here; it may be used elsewhere (e.g. specifications and/or implementations that use this content)

Logical Definition (CLD)

  • Include these codes as defined in http://terminology.hl7.org/CodeSystem/v3-EntityNamePartQualifierR2 version 📍2018-08-12
    CodeDisplayDefinition
    ACacademicDescription:Indicates that a title like "Dr.", "M.D." or "Ph.D." is an academic title.
    ADacquiredDescription:A name part a person acquired. The name part may be acquired by adoption, or the person may have chosen to use the name part for some other reason.


    Note: this differs from an Other/Psuedonym/Alias in that an acquired name part is acquired on a formal basis rather than an informal one (e.g. registered as part of the official name).
    BRbirthDescription:A name that a person was given at birth or established as a consequence of adoption.


    Note: This is not used for temporary names assigned at birth such as "Baby of Smith" a" which is just a name with a use code of "TEMP".
    CLcallmeDescription:Used to indicate which of the various name parts is used when interacting with the person.
    CONcontainer nameDescription: This refers to the container if present in the medicinal product name.

    EXAMPLES:



    For Optaflu suspension for injection in pre-filled syringe Influenza vaccine (surface antigen, inactivated, prepared in cell culture) (2007/2008 season): pre-filled syringe
    DEVdevice nameDescription: This refers to the qualifiers in the name for devices and is at the moment mainly applicable to insulins and inhalation products.

    EXAMPLES:



    For the medicinal product Actrapid FlexPen 100 IU/ml Solution for injection Subcutaneous use: FlexPen.
    FLAVFlavorNameDescription: This refers to a flavor of the medicinal product if present in the medicinal product name.


    Examples:



    For 'CoughCure Linctus Orange Flavor', the flavor part is "Orange"
    For 'Wonderdrug Syrup Cherry Flavor', the flavor part is "Cherry"
    FORMULFormulationPartNameDescription: This refers to the formulation of the medicinal product if present in the medicinal product name.


    Examples:



    For 'SpecialMed Sugar Free Cough Syrup', the formulation name part is "Sugar Free"
    For 'QuickCure Gluten-free Bulk Fibre', the formulation name part is "gluten-free"
    FRMform nameDescription: This refers to the pharmaceutical form/ if present in the medicinal product name.

    EXAMPLES:



    For Agenerase 50 mg soft capsules: Soft Capsules



    For Ludiomil 25mg-Filmtabletten: Filmtabletten



    For Optaflu suspension for injection in pre-filled syringe Influenza vaccine (surface antigen, inactivated, prepared in cell culture) (2007/2008 season): suspension for injection
    HONhonorificDescription:A honorific such as "The Right Honourable" or "Weledelgeleerde Heer".
    INinitialDescription:Indicates that a name part is just an initial. Initials do not imply a trailing period since this would not work with non-Latin scripts. In some languages, initials may consist of more than one letter, e.g., "Ph" could stand for "Philippe" or "Th" For "Thomas".
    INVinvented nameDescription: This refers to the product name without the trademark or the name of the marketing authorization holder or any other descriptor reflected in the product name and, if appropriate, whether it is intended e.g. for babies, children or adults.

    EXAMPLES:



    Agenerase



    Optaflu



    Ludiomil
    LSlegal statusDescription:For organizations a suffix indicating the legal status, e.g., "Inc.", "Co.", "AG", "GmbH", "B.V." "S.A.", "Ltd." etc.
    MIDmiddle nameDescription:Indicates that the name part is a middle name.


    Usage Notes: In general, the english "middle name" concept is all of the given names after the first. This qualifier may be used to explicitly indicate which given names are considered to be middle names. The middle name qualifier may also be used with family names. This is a Scandinavian use case, matching the concept of "mellomnavn","mellannamn". Note that there are specific rules that indicate what names may be taken as a mellannamn in different Scandinavian countries.
    NBnobilityDescription:A nobility title such as Sir, Count, Grafin.
    PFXprefixDescription:A prefix has a strong association to the immediately following name part. A prefix has no implicit trailing white space (it has implicit leading white space though).
    POPULTargetPopulationNameDescription: This refers to the target population for the medicinal product if present in the medicinal product name


    Examples:



    For 'Broncho-Drug 3.5 mg-capsules for children', the target population part is "children"
    For 'Adult Chesty Cough Syrup', the target population part is "adult"
    PRprofessionalDescription:Primarily in the British Imperial culture people tend to have an abbreviation of their professional organization as part of their credential titles.
    PharmaceuticalEntityNamePartQualifiersPharmaceuticalEntityNamePartQualifiersDescription: Medication Name Parts are a means of specifying a range of acceptable "official" forms of the name of a product. They are used as patterns against which input name strings may be matched for automatic identification of products from input text reports. While they cover the concepts held under "doseForm" or "route" or "strength" the name parts are not the same and do not fit into a controlled vocabulary in the same way. By specifying up to 8 name parts a much larger range of possible names can be generated.
    SCIscientific nameDescription: This refers to the product common or scientific name without the trademark or the name of the marketing authorization holder or any other descriptor reflected in the product name.

    EXAMPLES:



    For Agenerase: N/A



    For Optaflu: Influenza vaccine (surface antigen, inactivated, prepared in cell culture) (2007/2008 season)



    For Ludiomil: N/A
    SFXsuffixDescription:A suffix has a strong association to the immediately preceding name part. A suffix has no implicit leading white space (it has implicit trailing white space though).
    SPspouseDescription:The name assumed from the partner in a marital relationship. Usually the spouse's family name. Note that no inference about gender can be made from the existence of spouse names.
    STRstrength nameDescription: This refers to the strength if present in the medicinal product name. The use of decimal points should be accommodated if required.

    EXAMPLES:



    For Agenerase 50 mg soft capsules: 50mg



    For Ludiomil 25mg-Filmtabletten: 25 mg



    For Optaflu suspension for injection in pre-filled syringe Influenza vaccine (surface antigen, inactivated, prepared in cell culture) (2007/2008 season): N/A
    TIMETimeOrPeriodNameDescription: This refers to a time or time period that may be specified in the text of the medicinal product name


    Example:



    For an influenza vaccine 'Drug-FLU season 2008/2009', the time/period part is "2008/2009 season"
    TMKtrademark nameDescription: This refers to trademark/company element if present in the medicinal product name.

    EXAMPLES:



    for Insulin Human Winthrop Comb 15: Winthrop
    TitleStylesTitleStylesDescription:Extra information about the style of a title
    USEintended use nameDescription: This refers to the intended use if present in the medicinal product name without the trademark or the name of the marketing authorization holder or any other descriptor reflected in the product name.



    Examples:



    For 'Drug-BI Caplets - Heartburn Relief', the intended use part is: "Heartburn Relief"
    For 'Medicine Honey Syrup for Soothing Coughs' the intended use part is "Soothing Coughs"

 

Expansion

This value set expansion contains 27 concepts.

SystemVersionCodeDisplayDefinitionJSONXML
http://terminology.hl7.org/CodeSystem/v3-EntityNamePartQualifierR22018-08-12  ACacademic

Description:Indicates that a title like "Dr.", "M.D." or "Ph.D." is an academic title.

http://terminology.hl7.org/CodeSystem/v3-EntityNamePartQualifierR22018-08-12  ADacquired

Description:A name part a person acquired. The name part may be acquired by adoption, or the person may have chosen to use the name part for some other reason.

                       Note: this differs from an Other/Psuedonym/Alias in that an acquired name part is acquired on a formal basis rather than an informal one (e.g. registered as part of the official name).
http://terminology.hl7.org/CodeSystem/v3-EntityNamePartQualifierR22018-08-12  BRbirth

Description:A name that a person was given at birth or established as a consequence of adoption.

                       Note: This is not used for temporary names assigned at birth such as "Baby of Smith" a" which is just a name with a use code of "TEMP".
http://terminology.hl7.org/CodeSystem/v3-EntityNamePartQualifierR22018-08-12  CLcallme

Description:Used to indicate which of the various name parts is used when interacting with the person.

http://terminology.hl7.org/CodeSystem/v3-EntityNamePartQualifierR22018-08-12  CONcontainer name

Description: This refers to the container if present in the medicinal product name.

                    EXAMPLES: 

                    
                       
                          For Optaflu suspension for injection in pre-filled syringe Influenza vaccine (surface antigen, inactivated, prepared in cell culture) (2007/2008 season): pre-filled syringe
http://terminology.hl7.org/CodeSystem/v3-EntityNamePartQualifierR22018-08-12  DEVdevice name

Description: This refers to the qualifiers in the name for devices and is at the moment mainly applicable to insulins and inhalation products.

                    EXAMPLES: 

                    
                       
                          For the medicinal product Actrapid FlexPen 100 IU/ml Solution for injection Subcutaneous use: FlexPen.
http://terminology.hl7.org/CodeSystem/v3-EntityNamePartQualifierR22018-08-12  FLAVFlavorName

Description: This refers to a flavor of the medicinal product if present in the medicinal product name.

                       Examples:
                    

                    
                       For 'CoughCure Linctus Orange Flavor', the flavor part is "Orange"
                       For 'Wonderdrug Syrup Cherry Flavor', the flavor part is "Cherry"
http://terminology.hl7.org/CodeSystem/v3-EntityNamePartQualifierR22018-08-12  FORMULFormulationPartName

Description: This refers to the formulation of the medicinal product if present in the medicinal product name.

                       Examples:
                    

                    
                       For 'SpecialMed Sugar Free Cough Syrup', the formulation name part is "Sugar Free"
                       For 'QuickCure Gluten-free Bulk Fibre', the formulation name part is "gluten-free"
http://terminology.hl7.org/CodeSystem/v3-EntityNamePartQualifierR22018-08-12  FRMform name

Description: This refers to the pharmaceutical form/ if present in the medicinal product name.

                    EXAMPLES: 

                    
                       
                          For Agenerase 50 mg soft capsules: Soft Capsules

                       
                       
                          For Ludiomil 25mg-Filmtabletten: Filmtabletten

                       
                       
                          For Optaflu suspension for injection in pre-filled syringe Influenza vaccine (surface antigen, inactivated, prepared in cell culture) (2007/2008 season): suspension for injection
http://terminology.hl7.org/CodeSystem/v3-EntityNamePartQualifierR22018-08-12  HONhonorific

Description:A honorific such as "The Right Honourable" or "Weledelgeleerde Heer".

http://terminology.hl7.org/CodeSystem/v3-EntityNamePartQualifierR22018-08-12  INinitial

Description:Indicates that a name part is just an initial. Initials do not imply a trailing period since this would not work with non-Latin scripts. In some languages, initials may consist of more than one letter, e.g., "Ph" could stand for "Philippe" or "Th" For "Thomas".

http://terminology.hl7.org/CodeSystem/v3-EntityNamePartQualifierR22018-08-12  INVinvented name

Description: This refers to the product name without the trademark or the name of the marketing authorization holder or any other descriptor reflected in the product name and, if appropriate, whether it is intended e.g. for babies, children or adults.

                    EXAMPLES: 

                    
                       
                          Agenerase

                       
                       
                          Optaflu

                       
                       
                          Ludiomil
http://terminology.hl7.org/CodeSystem/v3-EntityNamePartQualifierR22018-08-12  LSlegal status

Description:For organizations a suffix indicating the legal status, e.g., "Inc.", "Co.", "AG", "GmbH", "B.V." "S.A.", "Ltd." etc.

http://terminology.hl7.org/CodeSystem/v3-EntityNamePartQualifierR22018-08-12  MIDmiddle name

Description:Indicates that the name part is a middle name.

                       Usage Notes: In general, the english "middle name" concept is all of the given names after the first. This qualifier may be used to explicitly indicate which given names are considered to be middle names. The middle name qualifier may also be used with family names. This is a Scandinavian use case, matching the concept of "mellomnavn","mellannamn". Note that there are specific rules that indicate what names may be taken as a mellannamn in different Scandinavian countries.
http://terminology.hl7.org/CodeSystem/v3-EntityNamePartQualifierR22018-08-12  NBnobility

Description:A nobility title such as Sir, Count, Grafin.

http://terminology.hl7.org/CodeSystem/v3-EntityNamePartQualifierR22018-08-12  PFXprefix

Description:A prefix has a strong association to the immediately following name part. A prefix has no implicit trailing white space (it has implicit leading white space though).

http://terminology.hl7.org/CodeSystem/v3-EntityNamePartQualifierR22018-08-12  POPULTargetPopulationName

Description: This refers to the target population for the medicinal product if present in the medicinal product name

                       Examples:
                    

                    
                       For 'Broncho-Drug 3.5 mg-capsules for children', the target population part is "children"
                       For 'Adult Chesty Cough Syrup', the target population part is "adult"
http://terminology.hl7.org/CodeSystem/v3-EntityNamePartQualifierR22018-08-12  PRprofessional

Description:Primarily in the British Imperial culture people tend to have an abbreviation of their professional organization as part of their credential titles.

http://terminology.hl7.org/CodeSystem/v3-EntityNamePartQualifierR22018-08-12  PharmaceuticalEntityNamePartQualifiersPharmaceuticalEntityNamePartQualifiers

Description: Medication Name Parts are a means of specifying a range of acceptable "official" forms of the name of a product. They are used as patterns against which input name strings may be matched for automatic identification of products from input text reports. While they cover the concepts held under "doseForm" or "route" or "strength" the name parts are not the same and do not fit into a controlled vocabulary in the same way. By specifying up to 8 name parts a much larger range of possible names can be generated.

http://terminology.hl7.org/CodeSystem/v3-EntityNamePartQualifierR22018-08-12  SCIscientific name

Description: This refers to the product common or scientific name without the trademark or the name of the marketing authorization holder or any other descriptor reflected in the product name.

                    EXAMPLES: 

                    
                       
                          For Agenerase: N/A

                       
                       
                          For Optaflu: Influenza vaccine (surface antigen, inactivated, prepared in cell culture) (2007/2008 season)

                       
                       
                          For Ludiomil: N/A
http://terminology.hl7.org/CodeSystem/v3-EntityNamePartQualifierR22018-08-12  SFXsuffix

Description:A suffix has a strong association to the immediately preceding name part. A suffix has no implicit leading white space (it has implicit trailing white space though).

http://terminology.hl7.org/CodeSystem/v3-EntityNamePartQualifierR22018-08-12  SPspouse

Description:The name assumed from the partner in a marital relationship. Usually the spouse's family name. Note that no inference about gender can be made from the existence of spouse names.

http://terminology.hl7.org/CodeSystem/v3-EntityNamePartQualifierR22018-08-12  STRstrength name

Description: This refers to the strength if present in the medicinal product name. The use of decimal points should be accommodated if required.

                    EXAMPLES:

                    
                       
                          For Agenerase 50 mg soft capsules: 50mg

                       
                       
                          For Ludiomil 25mg-Filmtabletten: 25 mg

                       
                       
                          For Optaflu suspension for injection in pre-filled syringe Influenza vaccine (surface antigen, inactivated, prepared in cell culture) (2007/2008 season): N/A
http://terminology.hl7.org/CodeSystem/v3-EntityNamePartQualifierR22018-08-12  TIMETimeOrPeriodName

Description: This refers to a time or time period that may be specified in the text of the medicinal product name

                       Example:
                    

                    
                       For an influenza vaccine 'Drug-FLU season 2008/2009', the time/period part is "2008/2009 season"
http://terminology.hl7.org/CodeSystem/v3-EntityNamePartQualifierR22018-08-12  TMKtrademark name

Description: This refers to trademark/company element if present in the medicinal product name.

                    EXAMPLES: 

                    
                       
                          for Insulin Human Winthrop Comb 15: Winthrop
http://terminology.hl7.org/CodeSystem/v3-EntityNamePartQualifierR22018-08-12  TitleStylesTitleStyles

Description:Extra information about the style of a title

http://terminology.hl7.org/CodeSystem/v3-EntityNamePartQualifierR22018-08-12  USEintended use name

Description: This refers to the intended use if present in the medicinal product name without the trademark or the name of the marketing authorization holder or any other descriptor reflected in the product name.

                       Examples:
                    

                    
                       For 'Drug-BI Caplets - Heartburn Relief', the intended use part is: "Heartburn Relief"
                       For 'Medicine Honey Syrup for Soothing Coughs' the intended use part is "Soothing Coughs"

Explanation of the columns that may appear on this page:

Level A few code lists that FHIR defines are hierarchical - each code is assigned a level. In this scheme, some codes are under other codes, and imply that the code they are under also applies
System The source of the definition of the code (when the value set draws in codes defined elsewhere)
Code The code (used as the code in the resource instance)
Display The display (used in the display element of a Coding). If there is no display, implementers should not simply display the code, but map the concept into their application
Definition An explanation of the meaning of the concept
Comments Additional notes about how to use the code