R4-MolecularSequence-element-map-to-R5
type: ConceptMap
node role: treeRoot
id:
  v: R4-MolecularSequence-element-map-to-R5
text:
  status:
    v: generated
  div:
    v: Generated Narrative: ConceptMap R4-MolecularSequence-element-map-to-R5 Mapping from http://hl7.org/fhir/4.0 to http://hl7.org/fhir/5.0 Group 1 Mapping from http://hl7.org/fhir/StructureDefinition/MolecularSequence|4.0.1 to MolecularSequenceversion: 5.0.0) Source Code Relationship Target Code Comment MolecularSequence.meta (meta) is equivalent to MolecularSequence.meta Element `MolecularSequence.meta` is mapped to FHIR R5 element `MolecularSequence.meta` as `Equivalent`. MolecularSequence.implicitRules (implicitRules) is equivalent to MolecularSequence.implicitRules Element `MolecularSequence.implicitRules` is mapped to FHIR R5 element `MolecularSequence.implicitRules` as `Equivalent`. Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. MolecularSequence.language (language) is equivalent to MolecularSequence.language Element `MolecularSequence.language` is mapped to FHIR R5 element `MolecularSequence.language` as `Equivalent`. Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on …
extension:
  url:
    v: http://hl7.org/fhir/StructureDefinition/structuredefinition-wg
    l: structuredefinition-wg
  value: Code
    v: fhir
extension:
  url:
    v: http://hl7.org/fhir/StructureDefinition/structuredefinition-fmm
    l: structuredefinition-fmm
  value: Integer
    v: 0
    extension:
      url:
        v: http://hl7.org/fhir/StructureDefinition/structuredefinition-conformance-derivedFrom
        l: structuredefinition-conformance-derivedFrom
      value: Canonical
        v: http://hl7.org/fhir/uv/xver/ImplementationGuide/hl7.fhir.uv.xver-r4.r5
        l: hl7.fhir.uv.xver-r4.r5
extension:
  url:
    v: http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status
    l: structuredefinition-standards-status
  value: Code
    v: trial-use
    extension:
      url:
        v: http://hl7.org/fhir/StructureDefinition/structuredefinition-conformance-derivedFrom
        l: structuredefinition-conformance-derivedFrom
      value: Canonical
        v: http://hl7.org/fhir/uv/xver/ImplementationGuide/hl7.fhir.uv.xver-r4.r5
        l: hl7.fhir.uv.xver-r4.r5
url:
  v: http://hl7.org/fhir/uv/xver/ConceptMap/R4-MolecularSequence-element-map-to-R5
  l: R4-MolecularSequence-element-map-to-R5
version:
  v: 0.1.0
name:
  v: R4MolecularSequenceElementMapToR5
title:
  v: Cross-version mapping for FHIR R4 MolecularSequence to FHIR R5 MolecularSequence
status:
  v: active
experimental:
  v: false
date:
  v: 2026-03-17T16:04:37.1960017-05:00
contact:
  name:
    v: FHIR Infrastructure
  telecom:
    system:
      v: url
    value:
      v: http://www.hl7.org/Special/committees/fiwg
description:
  v: This ConceptMap represents cross-version mappings for elements from a FHIR R4 MolecularSequence to FHIR R5.
jurisdiction:
  coding:
    system:
      v: http://unstats.un.org/unsd/methods/m49/m49.htm
      l: m49.htm
    code:
      v: 001
    display:
      v: World
source scope: Canonical
  v: http://hl7.org/fhir/4.0
  l: http://hl7.org/fhir/4.0
target scope: Uri
  v: http://hl7.org/fhir/5.0
  l: http://hl7.org/fhir/5.0
group:
  source:
    v: http://hl7.org/fhir/StructureDefinition/MolecularSequence|4.0.1
    l: http://hl7.org/fhir/StructureDefinition/MolecularSequence
  target:
    v: http://hl7.org/fhir/StructureDefinition/MolecularSequence|5.0.0
    l: http://hl7.org/fhir/StructureDefinition/MolecularSequence
  element:
    code:
      v: MolecularSequence.meta
    display:
      v: meta
    target:
      code:
        v: MolecularSequence.meta
      display:
        v: MolecularSequence.meta
      relationship:
        v: equivalent
      comment:
        v: Element `MolecularSequence.meta` is mapped to FHIR R5 element `MolecularSequence.meta` as `Equivalent`.
  element:
    code:
      v: MolecularSequence.implicitRules
    display:
      v: implicitRules
    target:
      code:
        v: MolecularSequence.implicitRules
      display:
        v: MolecularSequence.implicitRules
      relationship:
        v: equivalent
      comment:
        v: Element `MolecularSequence.implicitRules` is mapped to FHIR R5 element `MolecularSequence.implicitRules` as `Equivalent`. Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.
  element:
    code:
      v: MolecularSequence.language
    display:
      v: language
    target:
      code:
        v: MolecularSequence.language
      display:
        v: MolecularSequence.language
      relationship:
        v: equivalent
      comment:
        v: Element `MolecularSequence.language` is mapped to FHIR R5 element `MolecularSequence.language` as `Equivalent`. Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).
  element:
    code:
      v: MolecularSequence.text
    display:
      v: text
    target:
      code:
        v: MolecularSequence.text
      display:
        v: MolecularSequence.text
      relationship:
        v: equivalent
      comment:
        v: Element `MolecularSequence.text` is mapped to FHIR R5 element `MolecularSequence.text` as `Equivalent`. Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.
  element:
    code:
      v: MolecularSequence.contained
    display:
      v: contained
    target:
      code:
        v: MolecularSequence.contained
      display:
        v: MolecularSequence.contained
      relationship:
        v: equivalent
      comment:
        v: Element `MolecularSequence.contained` is mapped to FHIR R5 element `MolecularSequence.contained` as `Equivalent`. This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.
  element:
    code:
      v: MolecularSequence.identifier
    display:
      v: identifier
    target:
      code:
        v: MolecularSequence.identifier
      display:
        v: MolecularSequence.identifier
      relationship:
        v: equivalent
      comment:
        v: Element `MolecularSequence.identifier` is mapped to FHIR R5 element `MolecularSequence.identifier` as `Equivalent`.
  element:
    code:
      v: MolecularSequence.type
    display:
      v: type
    target:
      code:
        v: MolecularSequence.type
      display:
        v: MolecularSequence.type
      relationship:
        v: equivalent
      comment:
        v: Element `MolecularSequence.type` is mapped to FHIR R5 element `MolecularSequence.type` as `Equivalent`.
  element:
    code:
      v: MolecularSequence.patient
    display:
      v: patient
    target:
      code:
        v: MolecularSequence.subject
      display:
        v: MolecularSequence.subject
      relationship:
        v: equivalent
      comment:
        v: Element `MolecularSequence.patient` is mapped to FHIR R5 element `MolecularSequence.subject` as `Equivalent`.
  element:
    code:
      v: MolecularSequence.specimen

v: specimen

code:
  v: MolecularSequence.specimen
display:
  v: MolecularSequence.specimen
relationship:
  v: equivalent
comment:
  v: Element `MolecularSequence.specimen` is mapped to FHIR R5 element `MolecularSequence.specimen` as `Equivalent`.

code:
  v: MolecularSequence.device
display:
  v: device
target:
  code:
    v: MolecularSequence.device
  display:
    v: MolecularSequence.device
  relationship:
    v: equivalent
  comment:
    v: Element `MolecularSequence.device` is mapped to FHIR R5 element `MolecularSequence.device` as `Equivalent`.

code:
  v: MolecularSequence.performer
display:
  v: performer
target:
  code:
    v: MolecularSequence.performer
  display:
    v: MolecularSequence.performer
  relationship:
    v: equivalent
  comment:
    v: Element `MolecularSequence.performer` is mapped to FHIR R5 element `MolecularSequence.performer` as `Equivalent`.

code:
  v: MolecularSequence.referenceSeq
display:
  v: referenceSeq
target:
  code:
    v: MolecularSequence.relative
  display:
    v: MolecularSequence.relative
  relationship:
    v: related-to
  comment:
    v: Element `MolecularSequence.referenceSeq` is mapped to FHIR R5 element `MolecularSequence.relative` as `SourceIsNarrowerThanTarget`.

code:
  v: MolecularSequence.referenceSeq.chromosome
display:
  v: chromosome
target:
  code:
    v: MolecularSequence.relative.startingSequence.chromosome
  display:
    v: MolecularSequence.relative.startingSequence.chromosome
  relationship:
    v: equivalent
  comment:
    v: Element `MolecularSequence.referenceSeq.chromosome` is mapped to FHIR R5 element `MolecularSequence.relative.startingSequence.chromosome` as `Equivalent`.

code:
  v: MolecularSequence.referenceSeq.orientation
display:
  v: orientation
target:
  code:
    v: MolecularSequence.relative.startingSequence.orientation
  display:
    v: MolecularSequence.relative.startingSequence.orientation
  relationship:
    v: equivalent
  comment:
    v: Element `MolecularSequence.referenceSeq.orientation` is mapped to FHIR R5 element `MolecularSequence.relative.startingSequence.orientation` as `Equivalent`.

code:
  v: MolecularSequence.referenceSeq.strand
display:
  v: strand
target:
  code:
    v: MolecularSequence.relative.startingSequence.strand
  display:
    v: MolecularSequence.relative.startingSequence.strand
  relationship:
    v: equivalent
  comment:
    v: Element `MolecularSequence.referenceSeq.strand` is mapped to FHIR R5 element `MolecularSequence.relative.startingSequence.strand` as `Equivalent`.

code:
  v: MolecularSequence.variant
display:
  v: variant
target:
  code:
    v: MolecularSequence.relative
  display:
    v: MolecularSequence.relative
  relationship:
    v: source-is-broader-than-target
  comment:
    v: Element `MolecularSequence.variant` is mapped to FHIR R5 element `MolecularSequence.relative` as `Equivalent`.

code:
  v: MolecularSequence.variant.observedAllele
display:
  v: observedAllele
target:
  code:
    v: MolecularSequence.relative.edit.replacementSequence
  display:
    v: MolecularSequence.relative.edit.replacementSequence
  relationship:
    v: equivalent
  comment:
    v: Element `MolecularSequence.variant.observedAllele` is mapped to FHIR R5 element `MolecularSequence.relative.edit.replacementSequence` as `Equivalent`.

code:
  v: MolecularSequence.variant.referenceAllele
display:
  v: referenceAllele
target:
  code:
    v: MolecularSequence.relative.edit.replacedSequence
  display:
    v: MolecularSequence.relative.edit.replacedSequence
  relationship:
    v: equivalent
  comment:
    v: Element `MolecularSequence.variant.referenceAllele` is mapped to FHIR R5 element `MolecularSequence.relative.edit.replacedSequence` as `Equivalent`.

source:
  v: http://hl7.org/fhir/StructureDefinition/MolecularSequence|4.0.1
  l: http://hl7.org/fhir/StructureDefinition/MolecularSequence
target:
  v: http://hl7.org/fhir/4.0/StructureDefinition/extension-MolecularSequence.coordinateSystem|0.1.0
  l: http://hl7.org/fhir/4.0/StructureDefinition/extension-MolecularSequence.coordinateSystem
element:
  code:
    v: MolecularSequence.coordinateSystem
  display:
    v: coordinateSystem
  target:
    code:
      v: Extension
    relationship:
      v: equivalent
    comment:
      v: Element `MolecularSequence.coordinateSystem` has a context of MolecularSequence based on following the parent source element upwards and mapping to `MolecularSequence`. Element `MolecularSequence.coordinateSystem` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).

source:
  v: http://hl7.org/fhir/StructureDefinition/MolecularSequence|4.0.1
  l: http://hl7.org/fhir/StructureDefinition/MolecularSequence
target:
  v: http://hl7.org/fhir/4.0/StructureDefinition/extension-MolecularSequence.quantity|0.1.0
  l: http://hl7.org/fhir/4.0/StructureDefinition/extension-MolecularSequence.quantity
element:
  code:
    v: MolecularSequence.quantity
  display:
    v: quantity
  target:
    code:
      v: Extension
    relationship:
      v: equivalent
    comment:
      v: Element `MolecularSequence.quantity` has a context of MolecularSequence based on following the parent source element upwards and mapping to `MolecularSequence`. Element `MolecularSequence.quantity` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).

source:
  v: http://hl7.org/fhir/StructureDefinition/MolecularSequence|4.0.1
  l: http://hl7.org/fhir/StructureDefinition/MolecularSequence
target:
  v: http://hl7.org/fhir/4.0/StructureDefinition/extension-MolecularSequence.referenceSeq.genomeBuild|0.1.0
  l: http://hl7.org/fhir/4.0/StructureDefinition/extension-MolecularSequence.referenceSeq.genomeBuild
element:
  code:
    v: MolecularSequence.referenceSeq.genomeBuild
  display:
    v: genomeBuild
  target:
    code:
      v: Extension
    relationship:
      v: equivalent
    comment:
      v: Element `MolecularSequence.referenceSeq.genomeBuild` has a context of MolecularSequence.relative based on following the parent source element upwards and mapping to `MolecularSequence`. Element `MolecularSequence.referenceSeq.genomeBuild` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).

source:
  v: http://hl7.org/fhir/StructureDefinition/MolecularSequence|4.0.1
  l: http://hl7.org/fhir/StructureDefinition/MolecularSequence
target:
  v: http://hl7.org/fhir/4.0/StructureDefinition/extension-MolecularSequence.referenceSeq.referenceSeqId|0.1.0
  l: http://hl7.org/fhir/4.0/StructureDefinition/extension-MolecularSequence.referenceSeq.referenceSeqId
element:
  code:
    v: MolecularSequence.referenceSeq.referenceSeqId
  display:
    v: referenceSeqId
  target:
    code:
      v: Extension
    relationship:
      v: equivalent
    comment:
      v: Element `MolecularSequence.referenceSeq.referenceSeqId` has a context of MolecularSequence.relative based on following the parent source element upwards and mapping to `MolecularSequence`. Element `MolecularSequence.referenceSeq.referenceSeqId` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).

source:
  v: http://hl7.org/fhir/StructureDefinition/MolecularSequence|4.0.1
  l: http://hl7.org/fhir/StructureDefinition/MolecularSequence
target:
  v: http://hl7.org/fhir/4.0/StructureDefinition/extension-MolecularSequence.referenceSeq.referenceSeqPointer|0.1.0
  l: http://hl7.org/fhir/4.0/StructureDefinition/extension-MolecularSequence.referenceSeq.referenceSeqPointer
element:
  code:
    v: MolecularSequence.referenceSeq.referenceSeqPointer
  display:
    v: referenceSeqPointer
  target:
    code:
      v: Extension
    relationship:
      v: equivalent
    comment:
      v: Element `MolecularSequence.referenceSeq.referenceSeqPointer` has a context of MolecularSequence.relative based on following the parent source element upwards and mapping to `MolecularSequence`. Element `MolecularSequence.referenceSeq.referenceSeqPointer` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).

source:
  v: http://hl7.org/fhir/StructureDefinition/MolecularSequence|4.0.1
  l: http://hl7.org/fhir/StructureDefinition/MolecularSequence
target:
  v: http://hl7.org/fhir/4.0/StructureDefinition/extension-MolecularSequence.referenceSeq.referenceSeqString|0.1.0
  l: http://hl7.org/fhir/4.0/StructureDefinition/extension-MolecularSequence.referenceSeq.referenceSeqString
element:
  code:
    v: MolecularSequence.referenceSeq.referenceSeqString
  display:
    v: referenceSeqString
  target:
    code:
      v: Extension
    relationship:
      v: equivalent
    comment:
      v: Element `MolecularSequence.referenceSeq.referenceSeqString` has a context of MolecularSequence.relative based on following the parent source element upwards and mapping to `MolecularSequence`. Element `MolecularSequence.referenceSeq.referenceSeqString` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).

source:
  v: http://hl7.org/fhir/StructureDefinition/MolecularSequence|4.0.1
  l: http://hl7.org/fhir/StructureDefinition/MolecularSequence
target:
  v: http://hl7.org/fhir/4.0/StructureDefinition/extension-MolecularSequence.referenceSeq.windowStart|0.1.0
  l: http://hl7.org/fhir/4.0/StructureDefinition/extension-MolecularSequence.referenceSeq.windowStart
element:
  code:
    v: MolecularSequence.referenceSeq.windowStart
  display:
    v: windowStart
  target:
    code:
      v: Extension
    relationship:
      v: equivalent
    comment:
      v: Element `MolecularSequence.referenceSeq.windowStart` has a context of MolecularSequence.relative based on following the parent source element upwards and mapping to `MolecularSequence`. Element `MolecularSequence.referenceSeq.windowStart` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).

source:
  v: http://hl7.org/fhir/StructureDefinition/MolecularSequence|4.0.1
  l: http://hl7.org/fhir/StructureDefinition/MolecularSequence
target:
  v: http://hl7.org/fhir/4.0/StructureDefinition/extension-MolecularSequence.referenceSeq.windowEnd|0.1.0
  l: http://hl7.org/fhir/4.0/StructureDefinition/extension-MolecularSequence.referenceSeq.windowEnd
element:
  code:
    v: MolecularSequence.referenceSeq.windowEnd
  display:
    v: windowEnd
  target:
    code:
      v: Extension
    relationship:
      v: equivalent
    comment:
      v: Element `MolecularSequence.referenceSeq.windowEnd` has a context of MolecularSequence.relative based on following the parent source element upwards and mapping to `MolecularSequence`. Element `MolecularSequence.referenceSeq.windowEnd` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).

source:
  v: http://hl7.org/fhir/StructureDefinition/MolecularSequence|4.0.1
  l: http://hl7.org/fhir/StructureDefinition/MolecularSequence
target:
  v: http://hl7.org/fhir/4.0/StructureDefinition/extension-MolecularSequence.variant.start|0.1.0
  l: http://hl7.org/fhir/4.0/StructureDefinition/extension-MolecularSequence.variant.start
element:
  code:
    v: MolecularSequence.variant.start
  display:
    v: start
  target:
    code:
      v: Extension
    relationship:
      v: equivalent
    comment:
      v: Element `MolecularSequence.variant.start` has a context of MolecularSequence.relative based on following the parent source element upwards and mapping to `MolecularSequence`. Element `MolecularSequence.variant.start` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).

source:
  v: http://hl7.org/fhir/StructureDefinition/MolecularSequence|4.0.1
  l: http://hl7.org/fhir/StructureDefinition/MolecularSequence
target:
  v: http://hl7.org/fhir/4.0/StructureDefinition/extension-MolecularSequence.variant.end|0.1.0
  l: http://hl7.org/fhir/4.0/StructureDefinition/extension-MolecularSequence.variant.end
element:
  code:
    v: MolecularSequence.variant.end
  display:
    v: end
  target:
    code:
      v: Extension
    relationship:
      v: equivalent
    comment:
      v: Element `MolecularSequence.variant.end` has a context of MolecularSequence.relative based on following the parent source element upwards and mapping to `MolecularSequence`. Element `MolecularSequence.variant.end` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).

source:
  v: http://hl7.org/fhir/StructureDefinition/MolecularSequence|4.0.1
  l: http://hl7.org/fhir/StructureDefinition/MolecularSequence
target:
  v: http://hl7.org/fhir/4.0/StructureDefinition/extension-MolecularSequence.variant.cigar|0.1.0
  l: http://hl7.org/fhir/4.0/StructureDefinition/extension-MolecularSequence.variant.cigar
element:
  code:
    v: MolecularSequence.variant.cigar
  display:
    v: cigar
  target:
    code:
      v: Extension
    relationship:
      v: equivalent
    comment:
      v: Element `MolecularSequence.variant.cigar` has a context of MolecularSequence.relative based on following the parent source element upwards and mapping to `MolecularSequence`. Element `MolecularSequence.variant.cigar` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).

source:
  v: http://hl7.org/fhir/StructureDefinition/MolecularSequence|4.0.1
  l: http://hl7.org/fhir/StructureDefinition/MolecularSequence
target:
  v: http://hl7.org/fhir/4.0/StructureDefinition/extension-MolecularSequence.variant.variantPointer|0.1.0
  l: http://hl7.org/fhir/4.0/StructureDefinition/extension-MolecularSequence.variant.variantPointer
element:
  code:
    v: MolecularSequence.variant.variantPointer
  display:
    v: variantPointer
  target:
    code:
      v: Extension
    relationship:
      v: equivalent
    comment:
      v: Element `MolecularSequence.variant.variantPointer` has a context of MolecularSequence.relative based on following the parent source element upwards and mapping to `MolecularSequence`. Element `MolecularSequence.variant.variantPointer` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).

source:
  v: http://hl7.org/fhir/StructureDefinition/MolecularSequence|4.0.1
  l: http://hl7.org/fhir/StructureDefinition/MolecularSequence
target:
  v: http://hl7.org/fhir/4.0/StructureDefinition/extension-MolecularSequence.observedSeq|0.1.0
  l: http://hl7.org/fhir/4.0/StructureDefinition/extension-MolecularSequence.observedSeq
element:
  code:
    v: MolecularSequence.observedSeq
  display:
    v: observedSeq
  target:
    code:
      v: Extension
    relationship:
      v: equivalent
    comment:
      v: Element `MolecularSequence.observedSeq` has a context of MolecularSequence based on following the parent source element upwards and mapping to `MolecularSequence`. Element `MolecularSequence.observedSeq` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).

source:
  v: http://hl7.org/fhir/StructureDefinition/MolecularSequence|4.0.1
  l: http://hl7.org/fhir/StructureDefinition/MolecularSequence
target:
  v: http://hl7.org/fhir/4.0/StructureDefinition/extension-MolecularSequence.quality|0.1.0
  l: http://hl7.org/fhir/4.0/StructureDefinition/extension-MolecularSequence.quality
element:
  code:
    v: MolecularSequence.quality
  display:
    v: quality
  target:
    code:
      v: Extension
    relationship:
      v: equivalent
    comment:
      v: Element `MolecularSequence.quality` has a context of MolecularSequence based on following the parent source element upwards and mapping to `MolecularSequence`. Element `MolecularSequence.quality` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
element:
  code:
    v: MolecularSequence.quality.type
  display:
    v: type
  target:
    code:
      v: Extension.extension:type
    relationship:
      v: equivalent
    comment:
      v: Element `MolecularSequence.quality.type` is part of an existing definition because parent element `MolecularSequence.quality` requires a cross-version extension. Element `MolecularSequence.quality.type` has a context of MolecularSequence based on following the parent source element upwards and mapping to `MolecularSequence`. Element `MolecularSequence.quality.type` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
element:
  code:
    v: MolecularSequence.quality.standardSequence
  display:
    v: standardSequence
  target:
    code:
      v: Extension.extension:standardSequence
    relationship:
      v: equivalent
    comment:
      v: Element `MolecularSequence.quality.standardSequence` is part of an existing definition because parent element `MolecularSequence.quality` requires a cross-version extension. Element `MolecularSequence.quality.standardSequence` has a context of MolecularSequence based on following the parent source element upwards and mapping to `MolecularSequence`. Element `MolecularSequence.quality.standardSequence` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
element:
  code:
    v: MolecularSequence.quality.start
  display:
    v: start
  target:
    code:
      v: Extension.extension:start
    relationship:
      v: equivalent
    comment:
      v: Element `MolecularSequence.quality.start` is part of an existing definition because parent element `MolecularSequence.quality` requires a cross-version extension. Element `MolecularSequence.quality.start` has a context of MolecularSequence based on following the parent source element upwards and mapping to `MolecularSequence`. Element `MolecularSequence.quality.start` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
element:
  code:
    v: MolecularSequence.quality.end
  display:
    v: end
  target:
    code:
      v: Extension.extension:end
    relationship:
      v: equivalent
    comment:
      v: Element `MolecularSequence.quality.end` is part of an existing definition because parent element `MolecularSequence.quality` requires a cross-version extension. Element `MolecularSequence.quality.end` has a context of MolecularSequence based on following the parent source element upwards and mapping to `MolecularSequence`. Element `MolecularSequence.quality.end` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
element:
  code:
    v: MolecularSequence.quality.score
  display:
    v: score
  target:
    code:
      v: Extension.extension:score
    relationship:
      v: equivalent
    comment:
      v: Element `MolecularSequence.quality.score` is part of an existing definition because parent element `MolecularSequence.quality` requires a cross-version extension. Element `MolecularSequence.quality.score` has a context of MolecularSequence based on following the parent source element upwards and mapping to `MolecularSequence`. Element `MolecularSequence.quality.score` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
element:
  code:
    v: MolecularSequence.quality.method
  display:
    v: method
  target:
    code:
      v: Extension.extension:method
    relationship:
      v: equivalent
    comment:
      v: Element `MolecularSequence.quality.method` is part of an existing definition because parent element `MolecularSequence.quality` requires a cross-version extension. Element `MolecularSequence.quality.method` has a context of MolecularSequence based on following the parent source element upwards and mapping to `MolecularSequence`. Element `MolecularSequence.quality.method` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
element:
  code:
    v: MolecularSequence.quality.truthTP
  display:
    v: truthTP
  target:
    code:
      v: Extension.extension:truthTP
    relationship:
      v: equivalent
    comment:
      v: Element `MolecularSequence.quality.truthTP` is part of an existing definition because parent element `MolecularSequence.quality` requires a cross-version extension. Element `MolecularSequence.quality.truthTP` has a context of MolecularSequence based on following the parent source element upwards and mapping to `MolecularSequence`. Element `MolecularSequence.quality.truthTP` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
element:
  code:
    v: MolecularSequence.quality.queryTP
  display:
    v: queryTP
  target:
    code:
      v: Extension.extension:queryTP
    relationship:
      v: equivalent
    comment:
      v: Element `MolecularSequence.quality.queryTP` is part of an existing definition because parent element `MolecularSequence.quality` requires a cross-version extension. Element `MolecularSequence.quality.queryTP` has a context of MolecularSequence based on following the parent source element upwards and mapping to `MolecularSequence`. Element `MolecularSequence.quality.queryTP` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
element:
  code:
    v: MolecularSequence.quality.truthFN
  display:
    v: truthFN
  target:
    code:
      v: Extension.extension:truthFN
    relationship:
      v: equivalent
    comment:
      v: Element `MolecularSequence.quality.truthFN` is part of an existing definition because parent element `MolecularSequence.quality` requires a cross-version extension. Element `MolecularSequence.quality.truthFN` has a context of MolecularSequence based on following the parent source element upwards and mapping to `MolecularSequence`. Element `MolecularSequence.quality.truthFN` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
element:
  code:
    v: MolecularSequence.quality.queryFP
  display:
    v: queryFP
  target:
    code:
      v: Extension.extension:queryFP
    relationship:
      v: equivalent
    comment:
      v: Element `MolecularSequence.quality.queryFP` is part of an existing definition because parent element `MolecularSequence.quality` requires a cross-version extension. Element `MolecularSequence.quality.queryFP` has a context of MolecularSequence based on following the parent source element upwards and mapping to `MolecularSequence`. Element `MolecularSequence.quality.queryFP` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
element:
  code:
    v: MolecularSequence.quality.gtFP
  display:
    v: gtFP
  target:
    code:
      v: Extension.extension:gtFP
    relationship:
      v: equivalent
    comment:
      v: Element `MolecularSequence.quality.gtFP` is part of an existing definition because parent element `MolecularSequence.quality` requires a cross-version extension. Element `MolecularSequence.quality.gtFP` has a context of MolecularSequence based on following the parent source element upwards and mapping to `MolecularSequence`. Element `MolecularSequence.quality.gtFP` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
element:
  code:
    v: MolecularSequence.quality.precision
  display:
    v: precision
  target:
    code:
      v: Extension.extension:precision
    relationship:
      v: equivalent
    comment:
      v: Element `MolecularSequence.quality.precision` is part of an existing definition because parent element `MolecularSequence.quality` requires a cross-version extension. Element `MolecularSequence.quality.precision` has a context of MolecularSequence based on following the parent source element upwards and mapping to `MolecularSequence`. Element `MolecularSequence.quality.precision` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
element:
  code:
    v: MolecularSequence.quality.recall
  display:
    v: recall
  target:
    code:
      v: Extension.extension:recall
    relationship:
      v: equivalent
    comment:
      v: Element `MolecularSequence.quality.recall` is part of an existing definition because parent element `MolecularSequence.quality` requires a cross-version extension. Element `MolecularSequence.quality.recall` has a context of MolecularSequence based on following the parent source element upwards and mapping to `MolecularSequence`. Element `MolecularSequence.quality.recall` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
element:
  code:
    v: MolecularSequence.quality.fScore
  display:
    v: fScore
  target:
    code:
      v: Extension.extension:fScore
    relationship:
      v: equivalent
    comment:
      v: Element `MolecularSequence.quality.fScore` is part of an existing definition because parent element `MolecularSequence.quality` requires a cross-version extension. Element `MolecularSequence.quality.fScore` has a context of MolecularSequence based on following the parent source element upwards and mapping to `MolecularSequence`. Element `MolecularSequence.quality.fScore` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
element:
  code:
    v: MolecularSequence.quality.roc
  display:
    v: roc
  target:
    code:
      v: Extension.extension:roc
    relationship:
      v: equivalent
    comment:
      v: Element `MolecularSequence.quality.roc` is part of an existing definition because parent element `MolecularSequence.quality` requires a cross-version extension. Element `MolecularSequence.quality.roc` has a context of MolecularSequence based on following the parent source element upwards and mapping to `MolecularSequence`. Element `MolecularSequence.quality.roc` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
element:
  code:
    v: MolecularSequence.quality.roc.score

v: score

code:
  v: Extension.extension:roc.extension:score
relationship:
  v: equivalent
comment:
  v: Element `MolecularSequence.quality.roc.score` is part of an existing definition because parent element `MolecularSequence.quality.roc` requires a cross-version extension. Element `MolecularSequence.quality.roc.score` has a context of MolecularSequence based on following the parent source element upwards and mapping to `MolecularSequence`. Element `MolecularSequence.quality.roc.score` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).

code:
  v: MolecularSequence.quality.roc.numTP
display:
  v: numTP
target:
  code:
    v: Extension.extension:roc.extension:numTP
  relationship:
    v: equivalent
  comment:
    v: Element `MolecularSequence.quality.roc.numTP` is part of an existing definition because parent element `MolecularSequence.quality.roc` requires a cross-version extension. Element `MolecularSequence.quality.roc.numTP` has a context of MolecularSequence based on following the parent source element upwards and mapping to `MolecularSequence`. Element `MolecularSequence.quality.roc.numTP` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).

code:
  v: MolecularSequence.quality.roc.numFP
display:
  v: numFP
target:
  code:
    v: Extension.extension:roc.extension:numFP
  relationship:
    v: equivalent
  comment:
    v: Element `MolecularSequence.quality.roc.numFP` is part of an existing definition because parent element `MolecularSequence.quality.roc` requires a cross-version extension. Element `MolecularSequence.quality.roc.numFP` has a context of MolecularSequence based on following the parent source element upwards and mapping to `MolecularSequence`. Element `MolecularSequence.quality.roc.numFP` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).

code:
  v: MolecularSequence.quality.roc.numFN
display:
  v: numFN
target:
  code:
    v: Extension.extension:roc.extension:numFN
  relationship:
    v: equivalent
  comment:
    v: Element `MolecularSequence.quality.roc.numFN` is part of an existing definition because parent element `MolecularSequence.quality.roc` requires a cross-version extension. Element `MolecularSequence.quality.roc.numFN` has a context of MolecularSequence based on following the parent source element upwards and mapping to `MolecularSequence`. Element `MolecularSequence.quality.roc.numFN` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).

code:
  v: MolecularSequence.quality.roc.precision
display:
  v: precision
target:
  code:
    v: Extension.extension:roc.extension:precision
  relationship:
    v: equivalent
  comment:
    v: Element `MolecularSequence.quality.roc.precision` is part of an existing definition because parent element `MolecularSequence.quality.roc` requires a cross-version extension. Element `MolecularSequence.quality.roc.precision` has a context of MolecularSequence based on following the parent source element upwards and mapping to `MolecularSequence`. Element `MolecularSequence.quality.roc.precision` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).

code:
  v: MolecularSequence.quality.roc.sensitivity
display:
  v: sensitivity
target:
  code:
    v: Extension.extension:roc.extension:sensitivity
  relationship:
    v: equivalent
  comment:
    v: Element `MolecularSequence.quality.roc.sensitivity` is part of an existing definition because parent element `MolecularSequence.quality.roc` requires a cross-version extension. Element `MolecularSequence.quality.roc.sensitivity` has a context of MolecularSequence based on following the parent source element upwards and mapping to `MolecularSequence`. Element `MolecularSequence.quality.roc.sensitivity` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).

code:
  v: MolecularSequence.quality.roc.fMeasure
display:
  v: fMeasure
target:
  code:
    v: Extension.extension:roc.extension:fMeasure
  relationship:
    v: equivalent
  comment:
    v: Element `MolecularSequence.quality.roc.fMeasure` is part of an existing definition because parent element `MolecularSequence.quality.roc` requires a cross-version extension. Element `MolecularSequence.quality.roc.fMeasure` has a context of MolecularSequence based on following the parent source element upwards and mapping to `MolecularSequence`. Element `MolecularSequence.quality.roc.fMeasure` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).

source:
  v: http://hl7.org/fhir/StructureDefinition/MolecularSequence|4.0.1
  l: http://hl7.org/fhir/StructureDefinition/MolecularSequence
target:
  v: http://hl7.org/fhir/4.0/StructureDefinition/extension-MolecularSequence.readCoverage|0.1.0
  l: http://hl7.org/fhir/4.0/StructureDefinition/extension-MolecularSequence.readCoverage
element:
  code:
    v: MolecularSequence.readCoverage
  display:
    v: readCoverage
  target:
    code:
      v: Extension
    relationship:
      v: equivalent
    comment:
      v: Element `MolecularSequence.readCoverage` has a context of MolecularSequence based on following the parent source element upwards and mapping to `MolecularSequence`. Element `MolecularSequence.readCoverage` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).

source:
  v: http://hl7.org/fhir/StructureDefinition/MolecularSequence|4.0.1
  l: http://hl7.org/fhir/StructureDefinition/MolecularSequence
target:
  v: http://hl7.org/fhir/4.0/StructureDefinition/extension-MolecularSequence.repository|0.1.0
  l: http://hl7.org/fhir/4.0/StructureDefinition/extension-MolecularSequence.repository
element:
  code:
    v: MolecularSequence.repository
  display:
    v: repository
  target:
    code:
      v: Extension
    relationship:
      v: equivalent
    comment:
      v: Element `MolecularSequence.repository` has a context of MolecularSequence based on following the parent source element upwards and mapping to `MolecularSequence`. Element `MolecularSequence.repository` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
element:
  code:
    v: MolecularSequence.repository.type
  display:
    v: type
  target:
    code:
      v: Extension.extension:type
    relationship:
      v: equivalent
    comment:
      v: Element `MolecularSequence.repository.type` is part of an existing definition because parent element `MolecularSequence.repository` requires a cross-version extension. Element `MolecularSequence.repository.type` has a context of MolecularSequence based on following the parent source element upwards and mapping to `MolecularSequence`. Element `MolecularSequence.repository.type` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
element:
  code:
    v: MolecularSequence.repository.url
  display:
    v: url
  target:
    code:
      v: Extension.extension:url
    relationship:
      v: equivalent
    comment:
      v: Element `MolecularSequence.repository.url` is part of an existing definition because parent element `MolecularSequence.repository` requires a cross-version extension. Element `MolecularSequence.repository.url` has a context of MolecularSequence based on following the parent source element upwards and mapping to `MolecularSequence`. Element `MolecularSequence.repository.url` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
element:
  code:
    v: MolecularSequence.repository.name
  display:
    v: name
  target:
    code:
      v: Extension.extension:name
    relationship:
      v: equivalent
    comment:
      v: Element `MolecularSequence.repository.name` is part of an existing definition because parent element `MolecularSequence.repository` requires a cross-version extension. Element `MolecularSequence.repository.name` has a context of MolecularSequence based on following the parent source element upwards and mapping to `MolecularSequence`. Element `MolecularSequence.repository.name` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
element:
  code:
    v: MolecularSequence.repository.datasetId
  display:
    v: datasetId
  target:
    code:
      v: Extension.extension:datasetId
    relationship:
      v: equivalent
    comment:
      v: Element `MolecularSequence.repository.datasetId` is part of an existing definition because parent element `MolecularSequence.repository` requires a cross-version extension. Element `MolecularSequence.repository.datasetId` has a context of MolecularSequence based on following the parent source element upwards and mapping to `MolecularSequence`. Element `MolecularSequence.repository.datasetId` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
element:
  code:
    v: MolecularSequence.repository.variantsetId
  display:
    v: variantsetId
  target:
    code:
      v: Extension.extension:variantsetId
    relationship:
      v: equivalent
    comment:
      v: Element `MolecularSequence.repository.variantsetId` is part of an existing definition because parent element `MolecularSequence.repository` requires a cross-version extension. Element `MolecularSequence.repository.variantsetId` has a context of MolecularSequence based on following the parent source element upwards and mapping to `MolecularSequence`. Element `MolecularSequence.repository.variantsetId` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
element:
  code:
    v: MolecularSequence.repository.readsetId
  display:
    v: readsetId
  target:
    code:
      v: Extension.extension:readsetId
    relationship:
      v: equivalent
    comment:
      v: Element `MolecularSequence.repository.readsetId` is part of an existing definition because parent element `MolecularSequence.repository` requires a cross-version extension. Element `MolecularSequence.repository.readsetId` has a context of MolecularSequence based on following the parent source element upwards and mapping to `MolecularSequence`. Element `MolecularSequence.repository.readsetId` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).

source:
  v: http://hl7.org/fhir/StructureDefinition/MolecularSequence|4.0.1
  l: http://hl7.org/fhir/StructureDefinition/MolecularSequence
target:
  v: http://hl7.org/fhir/4.0/StructureDefinition/extension-MolecularSequence.pointer|0.1.0
  l: http://hl7.org/fhir/4.0/StructureDefinition/extension-MolecularSequence.pointer
element:
  code:
    v: MolecularSequence.pointer
  display:
    v: pointer
  target:
    code:
      v: Extension
    relationship:
      v: equivalent
    comment:
      v: Element `MolecularSequence.pointer` has a context of MolecularSequence based on following the parent source element upwards and mapping to `MolecularSequence`. Element `MolecularSequence.pointer` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).

source:
  v: http://hl7.org/fhir/StructureDefinition/MolecularSequence|4.0.1
  l: http://hl7.org/fhir/StructureDefinition/MolecularSequence
target:
  v: http://hl7.org/fhir/4.0/StructureDefinition/extension-MolecularSequence.structureVariant|0.1.0
  l: http://hl7.org/fhir/4.0/StructureDefinition/extension-MolecularSequence.structureVariant
element:
  code:
    v: MolecularSequence.structureVariant
  display:
    v: structureVariant
  target:
    code:
      v: Extension
    relationship:
      v: equivalent
    comment:
      v: Element `MolecularSequence.structureVariant` has a context of MolecularSequence based on following the parent source element upwards and mapping to `MolecularSequence`. Element `MolecularSequence.structureVariant` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
element:
  code:
    v: MolecularSequence.structureVariant.variantType
  display:
    v: variantType
  target:
    code:
      v: Extension.extension:variantType
    relationship:
      v: equivalent
    comment:
      v: Element `MolecularSequence.structureVariant.variantType` is part of an existing definition because parent element `MolecularSequence.structureVariant` requires a cross-version extension. Element `MolecularSequence.structureVariant.variantType` has a context of MolecularSequence based on following the parent source element upwards and mapping to `MolecularSequence`. Element `MolecularSequence.structureVariant.variantType` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
element:
  code:
    v: MolecularSequence.structureVariant.exact
  display:
    v: exact
  target:
    code:
      v: Extension.extension:exact
    relationship:
      v: equivalent
    comment:
      v: Element `MolecularSequence.structureVariant.exact` is part of an existing definition because parent element `MolecularSequence.structureVariant` requires a cross-version extension. Element `MolecularSequence.structureVariant.exact` has a context of MolecularSequence based on following the parent source element upwards and mapping to `MolecularSequence`. Element `MolecularSequence.structureVariant.exact` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
element:
  code:
    v: MolecularSequence.structureVariant.length
  display:
    v: length
  target:
    code:
      v: Extension.extension:length
    relationship:
      v: equivalent
    comment:
      v: Element `MolecularSequence.structureVariant.length` is part of an existing definition because parent element `MolecularSequence.structureVariant` requires a cross-version extension. Element `MolecularSequence.structureVariant.length` has a context of MolecularSequence based on following the parent source element upwards and mapping to `MolecularSequence`. Element `MolecularSequence.structureVariant.length` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
element:
  code:
    v: MolecularSequence.structureVariant.outer
  display:
    v: outer
  target:
    code:
      v: Extension.extension:outer
    relationship:
      v: equivalent
    comment:
      v: Element `MolecularSequence.structureVariant.outer` is part of an existing definition because parent element `MolecularSequence.structureVariant` requires a cross-version extension. Element `MolecularSequence.structureVariant.outer` has a context of MolecularSequence based on following the parent source element upwards and mapping to `MolecularSequence`. Element `MolecularSequence.structureVariant.outer` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
element:
  code:
    v: MolecularSequence.structureVariant.outer.start
  display:
    v: start
  target:
    code:
      v: Extension.extension:outer.extension:start
    relationship:
      v: equivalent
    comment:
      v: Element `MolecularSequence.structureVariant.outer.start` is part of an existing definition because parent element `MolecularSequence.structureVariant.outer` requires a cross-version extension. Element `MolecularSequence.structureVariant.outer.start` has a context of MolecularSequence based on following the parent source element upwards and mapping to `MolecularSequence`. Element `MolecularSequence.structureVariant.outer.start` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
element:
  code:
    v: MolecularSequence.structureVariant.outer.end
  display:
    v: end
  target:
    code:
      v: Extension.extension:outer.extension:end
    relationship:
      v: equivalent
    comment:
      v: Element `MolecularSequence.structureVariant.outer.end` is part of an existing definition because parent element `MolecularSequence.structureVariant.outer` requires a cross-version extension. Element `MolecularSequence.structureVariant.outer.end` has a context of MolecularSequence based on following the parent source element upwards and mapping to `MolecularSequence`. Element `MolecularSequence.structureVariant.outer.end` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
element:
  code:
    v: MolecularSequence.structureVariant.inner
  display:
    v: inner
  target:
    code:
      v: Extension.extension:inner
    relationship:
      v: equivalent
    comment:
      v: Element `MolecularSequence.structureVariant.inner` is part of an existing definition because parent element `MolecularSequence.structureVariant` requires a cross-version extension. Element `MolecularSequence.structureVariant.inner` has a context of MolecularSequence based on following the parent source element upwards and mapping to `MolecularSequence`. Element `MolecularSequence.structureVariant.inner` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
element:
  code:
    v: MolecularSequence.structureVariant.inner.start
  display:
    v: start
  target:
    code:
      v: Extension.extension:inner.extension:start
    relationship:
      v: equivalent
    comment:
      v: Element `MolecularSequence.structureVariant.inner.start` is part of an existing definition because parent element `MolecularSequence.structureVariant.inner` requires a cross-version extension. Element `MolecularSequence.structureVariant.inner.start` has a context of MolecularSequence based on following the parent source element upwards and mapping to `MolecularSequence`. Element `MolecularSequence.structureVariant.inner.start` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
element:
  code:
    v: MolecularSequence.structureVariant.inner.end
  display:
    v: end
  target:
    code:
      v: Extension.extension:inner.extension:end
    relationship:
      v: equivalent
    comment:
      v: Element `MolecularSequence.structureVariant.inner.end` is part of an existing definition because parent element `MolecularSequence.structureVariant.inner` requires a cross-version extension. Element `MolecularSequence.structureVariant.inner.end` has a context of MolecularSequence based on following the parent source element upwards and mapping to `MolecularSequence`. Element `MolecularSequence.structureVariant.inner.end` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).