Generated Narrative: ConceptMap R4-GraphDefinition-element-map-to-R5 Mapping from http://hl7.org/fhir/4.0 to http://hl7.org/fhir/5.0 Group 1 Mapping from http://hl7.org/fhir/StructureDefinition/GraphDefinition|4.0.1 to GraphDefinitionversion: 5.0.0) Source Code Relationship Target Code Comment GraphDefinition.meta (meta) is equivalent to GraphDefinition.meta Element `GraphDefinition.meta` is mapped to FHIR R5 element `GraphDefinition.meta` as `Equivalent`. GraphDefinition.implicitRules (implicitRules) is equivalent to GraphDefinition.implicitRules Element `GraphDefinition.implicitRules` is mapped to FHIR R5 element `GraphDefinition.implicitRules` as `Equivalent`. Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. GraphDefinition.language (language) is equivalent to GraphDefinition.language Element `GraphDefinition.language` is mapped to FHIR R5 element `GraphDefinition.language` as `Equivalent`. Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute). GraphDefinition.text (text) is equivalent to GraphDefinition.text Element `GraphDefinition.text` is mapped to FHIR R5 element `GraphDefinition.text` as `Equivalent`. Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later. GraphDefinition.contained (contained) is equivalent to GraphDefinition.contained Element `GraphDefinition.contained` is mapped to FHIR R5 element `GraphDefinition.contained` as `Equivalent`. This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels. GraphDefinition.url (url) is equivalent to GraphDefinition.url Element `GraphDefinition.url` is mapped to FHIR R5 element `GraphDefinition.url` as `Equivalent`. Can be a urn:uuid: or a urn:oid: but real http: addresses are preferred. Multiple instances may share the same URL if they have a distinct version. The determination of when to create a new version of a resource (same url, new version) vs. defining a new artifact is up to the author. Considerations for making this decision are found in [Technical and Business Versions](https://hl7.org/fhir/resource..html#versions). In some cases, the resource can no longer be found at the stated url, but the url itself cannot change. Implementations can use the [meta.source](https://hl7.org/fhir/resou.html#meta) element to indicate where the current master source of the resource can be found. GraphDefinition.version (version) is equivalent to GraphDefinition.version Element `GraphDefinition.version` is mapped to FHIR R5 element `GraphDefinition.version` as `Equivalent`. There may be different graph definition instances that have the same identifier but different versions. The version can be appended to the url in a reference to allow a reference to a particular business version of the graph definition with the format [url]|[version]. GraphDefinition.name (name) is equivalent to GraphDefinition.name Element `GraphDefinition.name` is mapped to FHIR R5 element `GraphDefinition.name` as `Equivalent`. The name is not expected to be globally unique. The name should be a simple alphanumeric type name to ensure that it is machine-processing friendly. GraphDefinition.status (status) is equivalent to GraphDefinition.status Element `GraphDefinition.status` is mapped to FHIR R5 element `GraphDefinition.status` as `Equivalent`. Allows filtering of graph definitions that are appropriate for use versus not. GraphDefinition.experimental (experimental) is equivalent to GraphDefinition.experimental Element `GraphDefinition.experimental` is mapped to FHIR R5 element `GraphDefinition.experimental` as `Equivalent`. Allows filtering of graph definitions that are appropriate for use versus not. GraphDefinition.date (date) is equivalent to GraphDefinition.date Element `GraphDefinition.date` is mapped to FHIR R5 element `GraphDefinition.date` as `Equivalent`. Note that this is not the same as the resource last-modified-date, since the resource may be a secondary representation of the graph definition. Additional specific dates may be added as extensions or be found by consulting Provenances associated with past versions of the resource. GraphDefinition.publisher (publisher) is equivalent to GraphDefinition.publisher Element `GraphDefinition.publisher` is mapped to FHIR R5 element `GraphDefinition.publisher` as `Equivalent`. Usually an organization but may be an individual. The publisher (or steward) of the graph definition is the organization or individual primarily responsible for the maintenance and upkeep of the graph definition. This is not necessarily the same individual or organization that developed and initially authored the content. The publisher is the primary point of contact for questions or issues with the graph definition. This item SHOULD be populated unless the information is available from context. GraphDefinition.contact (contact) is equivalent to GraphDefinition.contact Element `GraphDefinition.contact` is mapped to FHIR R5 element `GraphDefinition.contact` as `Equivalent`. May be a web site, an email address, a telephone number, etc. GraphDefinition.description (description) is equivalent to GraphDefinition.description Element `GraphDefinition.description` is mapped to FHIR R5 element `GraphDefinition.description` as `Equivalent`. This description can be used to capture details such as why the graph definition was built, comments about misuse, instructions for clinical use and interpretation, literature references, examples from the paper world, etc. It is not a rendering of the graph definition as conveyed in the 'text' field of the resource itself. This item SHOULD be populated unless the information is available from context (e.g. the language of the graph definition is presumed to be the predominant language in the place the graph definition was created). GraphDefinition.useContext (useContext) is equivalent to GraphDefinition.useContext Element `GraphDefinition.useContext` is mapped to FHIR R5 element `GraphDefinition.useContext` as `Equivalent`. When multiple useContexts are specified, there is no expectation that all or any of the contexts apply. GraphDefinition.jurisdiction (jurisdiction) is equivalent to GraphDefinition.jurisdiction Element `GraphDefinition.jurisdiction` is mapped to FHIR R5 element `GraphDefinition.jurisdiction` as `Equivalent`. It may be possible for the graph definition to be used in jurisdictions other than those for which it was originally designed or intended. GraphDefinition.purpose (purpose) is equivalent to GraphDefinition.purpose Element `GraphDefinition.purpose` is mapped to FHIR R5 element `GraphDefinition.purpose` as `Equivalent`. This element does not describe the usage of the graph definition. Instead, it provides traceability of ''why'' the resource is either needed or ''why'' it is defined as it is. This may be used to point to source materials or specifications that drove the structure of this graph definition. GraphDefinition.start (start) is broader than GraphDefinition.start Element `GraphDefinition.start` is mapped to FHIR R5 element `GraphDefinition.start` as `SourceIsBroaderThanTarget`. The mappings for `GraphDefinition.start` do not cover the following types: code. The mappings for `GraphDefinition.start` do not cover the following types based on type expansion: value. GraphDefinition.link (link) is broader than GraphDefinition.link Element `GraphDefinition.link` is mapped to FHIR R5 element `GraphDefinition.link` as `Equivalent`. GraphDefinition.link.path (path) is equivalent to GraphDefinition.link.path Element `GraphDefinition.link.path` is mapped to FHIR R5 element `GraphDefinition.link.path` as `Equivalent`. The path expression cannot contain a resolve() function. If there is no path, the link is a reverse lookup, using target.params. If the path is "*" then this means all references in the resource. GraphDefinition.link.sliceName (sliceName) is equivalent to GraphDefinition.link.sliceName Element `GraphDefinition.link.sliceName` is mapped to FHIR R5 element `GraphDefinition.link.sliceName` as `Equivalent`. GraphDefinition.link.min (min) is equivalent to GraphDefinition.link.min Element `GraphDefinition.link.min` is mapped to FHIR R5 element `GraphDefinition.link.min` as `Equivalent`. GraphDefinition.link.max (max) is equivalent to GraphDefinition.link.max Element `GraphDefinition.link.max` is mapped to FHIR R5 element `GraphDefinition.link.max` as `Equivalent`. GraphDefinition.link.description (description) is equivalent to GraphDefinition.link.description Element `GraphDefinition.link.description` is mapped to FHIR R5 element `GraphDefinition.link.description` as `Equivalent`. Group 2 Mapping from http://hl7.org/fhir/StructureDefinition/GraphDefinition|4.0.1 to R4: Type of resource at which the graph starts additional typesversion: 0.1.0) Source Code Relationship Target Code Comment GraphDefinition.start (start) is equivalent to Extension (R4: Type of resource at which the graph starts additional types) Element `GraphDefinition.start` is mapped to FHIR R5 element `GraphDefinition.start` as `SourceIsBroaderThanTarget`. The mappings for `GraphDefinition.start` do not cover the following types: code. The mappings for `GraphDefinition.start` do not cover the following types based on type expansion: value. Group 3 Mapping from http://hl7.org/fhir/StructureDefinition/GraphDefinition|4.0.1 to R4: Profile on base resource (new)version: 0.1.0) Source Code Relationship Target Code Comment GraphDefinition.profile (profile) is equivalent to Extension (R4: Profile on base resource (new)) Element `GraphDefinition.profile` has a context of GraphDefinition based on following the parent source element upwards and mapping to `GraphDefinition`. Element `GraphDefinition.profile` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element). The code does not include the '$' prefix that is always included in the URL when the operation is invoked. Group 4 Mapping from http://hl7.org/fhir/StructureDefinition/GraphDefinition|4.0.1 to R4: linkversion: 0.1.0) Source Concept Details Relationship Target Concept Details Comment Codes from http://hl7.org/fhir/StructureDefinition/GraphDefinition|4.0.1 Codes from R4: link GraphDefinition.link link is equivalent to Extension Element `GraphDefinition.link` is mapped to FHIR R5 element `GraphDefinition.link` as `Equivalent`. GraphDefinition.link.path path is equivalent to Extension.extension:path Element `GraphDefinition.link.path` is mapped to FHIR R5 element `GraphDefinition.link.path` as `Equivalent`. The path expression cannot contain a resolve() function. If there is no path, the link is a reverse lookup, using target.params. If the path is "*" then this means all references in the resource. GraphDefinition.link.sliceName sliceName is equivalent to Extension.extension:sliceName Element `GraphDefinition.link.sliceName` is mapped to FHIR R5 element `GraphDefinition.link.sliceName` as `Equivalent`. GraphDefinition.link.min min is equivalent to Extension.extension:min Element `GraphDefinition.link.min` is mapped to FHIR R5 element `GraphDefinition.link.min` as `Equivalent`. GraphDefinition.link.max max is equivalent to Extension.extension:max Element `GraphDefinition.link.max` is mapped to FHIR R5 element `GraphDefinition.link.max` as `Equivalent`. GraphDefinition.link.description description is equivalent to Extension.extension:description Element `GraphDefinition.link.description` is mapped to FHIR R5 element `GraphDefinition.link.description` as `Equivalent`. GraphDefinition.link.target target is equivalent to Extension.extension:target Element `GraphDefinition.link.target` has a context of GraphDefinition.link based on following the parent source element upwards and mapping to `GraphDefinition`. Element `GraphDefinition.link.target` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element). GraphDefinition.link.target.type type is broader than Extension.extension:target.extension:type Element `GraphDefinition.link.target.type` is part of an existing definition because parent element `GraphDefinition.link.target` requires a cross-version extension. Element `GraphDefinition.link.target.type` has a context of GraphDefinition.link based on following the parent source element upwards and mapping to `GraphDefinition`. Element `GraphDefinition.link.target.type` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element). GraphDefinition.link.target.params params is equivalent to Extension.extension:target.extension:params Element `GraphDefinition.link.target.params` is part of an existing definition because parent element `GraphDefinition.link.target` requires a cross-version extension. Element `GraphDefinition.link.target.params` has a context of GraphDefinition.link based on following the parent source element upwards and mapping to `GraphDefinition`. Element `GraphDefinition.link.target.params` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element). At least one of the parameters must have the value {ref} which identifies the focus resource. GraphDefinition.link.target.profile profile is equivalent to Extension.extension:target.extension:profile Element `GraphDefinition.link.target.profile` is part of an existing definition because parent element `GraphDefinition.link.target` requires a cross-version extension. Element `GraphDefinition.link.target.profile` has a context of GraphDefinition.link based on following the parent source element upwards and mapping to `GraphDefinition`. Element `GraphDefinition.link.target.profile` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element). GraphDefinition.link.target.compartment compartment is equivalent to Extension.extension:target.extension:compartment Element `GraphDefinition.link.target.compartment` is part of an existing definition because parent element `GraphDefinition.link.target` requires a cross-version extension. Element `GraphDefinition.link.target.compartment` has a context of GraphDefinition.link based on following the parent source element upwards and mapping to `GraphDefinition`. Element `GraphDefinition.link.target.compartment` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element). GraphDefinition.link.target.compartment.use use is equivalent to Extension.extension:target.extension:compartment.extension:use Element `GraphDefinition.link.target.compartment.use` is part of an existing definition because parent element `GraphDefinition.link.target.compartment` requires a cross-version extension. Element `GraphDefinition.link.target.compartment.use` has a context of GraphDefinition.link based on following the parent source element upwards and mapping to `GraphDefinition`. Element `GraphDefinition.link.target.compartment.use` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element). All conditional rules are evaluated; if they are true, then the rules are evaluated. GraphDefinition.link.target.compartment.code code is equivalent to Extension.extension:target.extension:compartment.extension:code Element `GraphDefinition.link.target.compartment.code` is part of an existing definition because parent element `GraphDefinition.link.target.compartment` requires a cross-version extension. Element `GraphDefinition.link.target.compartment.code` has a context of GraphDefinition.link based on following the parent source element upwards and mapping to `GraphDefinition`. Element `GraphDefinition.link.target.compartment.code` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element). GraphDefinition.link.target.compartment.rule rule is equivalent to Extension.extension:target.extension:compartment.extension:rule Element `GraphDefinition.link.target.compartment.rule` is part of an existing definition because parent element `GraphDefinition.link.target.compartment` requires a cross-version extension. Element `GraphDefinition.link.target.compartment.rule` has a context of GraphDefinition.link based on following the parent source element upwards and mapping to `GraphDefinition`. Element `GraphDefinition.link.target.compartment.rule` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element). GraphDefinition.link.target.compartment.expression expression is equivalent to Extension.extension:target.extension:compartment.extension:expression Element `GraphDefinition.link.target.compartment.expression` is part of an existing definition because parent element `GraphDefinition.link.target.compartment` requires a cross-version extension. Element `GraphDefinition.link.target.compartment.expression` has a context of GraphDefinition.link based on following the parent source element upwards and mapping to `GraphDefinition`. Element `GraphDefinition.link.target.compartment.expression` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element). GraphDefinition.link.target.compartment.description description is equivalent to Extension.extension:target.extension:compartment.extension:description Element `GraphDefinition.link.target.compartment.description` is part of an existing definition because parent element `GraphDefinition.link.target.compartment` requires a cross-version extension. Element `GraphDefinition.link.target.compartment.description` has a context of GraphDefinition.link based on following the parent source element upwards and mapping to `GraphDefinition`. Element `GraphDefinition.link.target.compartment.description` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element). GraphDefinition.link.target.link link is equivalent to Extension.extension:target.extension:link Element `GraphDefinition.link.target.link` is part of an existing definition because parent element `GraphDefinition.link.target` requires a cross-version extension. Element `GraphDefinition.link.target.link` has a context of GraphDefinition.link based on following the parent source element upwards and mapping to `GraphDefinition`. Element `GraphDefinition.link.target.link` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element). is equivalent to Extension.extension:link Element `GraphDefinition.link.target.link` is part of an existing definition because parent element `GraphDefinition.link.target` requires a cross-version extension. Element `GraphDefinition.link.target.link` has a context of GraphDefinition.link based on following the parent source element upwards and mapping to `GraphDefinition`. Element `GraphDefinition.link.target.link` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element). Group 5 Mapping from http://hl7.org/fhir/StructureDefinition/GraphDefinition|4.0.1 to R4: Potential target for the link (new)version: 0.1.0) Source Code Relationship Target Code Comment GraphDefinition.link.target (target) is equivalent to Extension (R4: Potential target for the link (new)) Element `GraphDefinition.link.target` has a context of GraphDefinition.link based on following the parent source element upwards and mapping to `GraphDefinition`. Element `GraphDefinition.link.target` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element). GraphDefinition.link.target.type (type) is broader than Extension.extension:type (R4: Type of resource this link refers to (new)) Element `GraphDefinition.link.target.type` is part of an existing definition because parent element `GraphDefinition.link.target` requires a cross-version extension. Element `GraphDefinition.link.target.type` has a context of GraphDefinition.link based on following the parent source element upwards and mapping to `GraphDefinition`. Element `GraphDefinition.link.target.type` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element). GraphDefinition.link.target.params (params) is equivalent to Extension.extension:params (R4: Criteria for reverse lookup (new)) Element `GraphDefinition.link.target.params` is part of an existing definition because parent element `GraphDefinition.link.target` requires a cross-version extension. Element `GraphDefinition.link.target.params` has a context of GraphDefinition.link based on following the parent source element upwards and mapping to `GraphDefinition`. Element `GraphDefinition.link.target.params` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element). At least one of the parameters must have the value {ref} which identifies the focus resource. GraphDefinition.link.target.profile (profile) is equivalent to Extension.extension:profile (R4: Profile for the target resource (new)) Element `GraphDefinition.link.target.profile` is part of an existing definition because parent element `GraphDefinition.link.target` requires a cross-version extension. Element `GraphDefinition.link.target.profile` has a context of GraphDefinition.link based on following the parent source element upwards and mapping to `GraphDefinition`. Element `GraphDefinition.link.target.profile` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element). GraphDefinition.link.target.compartment (compartment) is equivalent to Extension.extension:compartment (R4: Compartment Consistency Rules (new)) Element `GraphDefinition.link.target.compartment` is part of an existing definition because parent element `GraphDefinition.link.target` requires a cross-version extension. Element `GraphDefinition.link.target.compartment` has a context of GraphDefinition.link based on following the parent source element upwards and mapping to `GraphDefinition`. Element `GraphDefinition.link.target.compartment` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element). GraphDefinition.link.target.compartment.use (use) is equivalent to Extension.extension:compartment.extension:use (R4: condition | requirement (new)) Element `GraphDefinition.link.target.compartment.use` is part of an existing definition because parent element `GraphDefinition.link.target.compartment` requires a cross-version extension. Element `GraphDefinition.link.target.compartment.use` has a context of GraphDefinition.link based on following the parent source element upwards and mapping to `GraphDefinition`. Element `GraphDefinition.link.target.compartment.use` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element). All conditional rules are evaluated; if they are true, then the rules are evaluated. GraphDefinition.link.target.compartment.code (code) is equivalent to Extension.extension:compartment.extension:code (R4: Patient | Encounter | RelatedPerson | Practitioner | Device (new)) Element `GraphDefinition.link.target.compartment.code` is part of an existing definition because parent element `GraphDefinition.link.target.compartment` requires a cross-version extension. Element `GraphDefinition.link.target.compartment.code` has a context of GraphDefinition.link based on following the parent source element upwards and mapping to `GraphDefinition`. Element `GraphDefinition.link.target.compartment.code` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element). GraphDefinition.link.target.compartment.rule (rule) is equivalent to Extension.extension:compartment.extension:rule (R4: identical | matching | different | custom (new)) Element `GraphDefinition.link.target.compartment.rule` is part of an existing definition because parent element `GraphDefinition.link.target.compartment` requires a cross-version extension. Element `GraphDefinition.link.target.compartment.rule` has a context of GraphDefinition.link based on following the parent source element upwards and mapping to `GraphDefinition`. Element `GraphDefinition.link.target.compartment.rule` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element). GraphDefinition.link.target.compartment.expression (expression) is equivalent to Extension.extension:compartment.extension:expression (R4: Custom rule, as a FHIRPath expression (new)) Element `GraphDefinition.link.target.compartment.expression` is part of an existing definition because parent element `GraphDefinition.link.target.compartment` requires a cross-version extension. Element `GraphDefinition.link.target.compartment.expression` has a context of GraphDefinition.link based on following the parent source element upwards and mapping to `GraphDefinition`. Element `GraphDefinition.link.target.compartment.expression` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element). GraphDefinition.link.target.compartment.description (description) is equivalent to Extension.extension:compartment.extension:description (R4: Documentation for FHIRPath expression (new)) Element `GraphDefinition.link.target.compartment.description` is part of an existing definition because parent element `GraphDefinition.link.target.compartment` requires a cross-version extension. Element `GraphDefinition.link.target.compartment.description` has a context of GraphDefinition.link based on following the parent source element upwards and mapping to `GraphDefinition`. Element `GraphDefinition.link.target.compartment.description` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element). GraphDefinition.link.target.link (link) is equivalent to Extension.extension:link (R4: Additional links from target resource (new)) Element `GraphDefinition.link.target.link` is part of an existing definition because parent element `GraphDefinition.link.target` requires a cross-version extension. Element `GraphDefinition.link.target.link` has a context of GraphDefinition.link based on following the parent source element upwards and mapping to `GraphDefinition`. Element `GraphDefinition.link.target.link` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Cross-version mapping for FHIR R4 GraphDefinition to FHIR R5 GraphDefinition
This ConceptMap represents cross-version mappings for elements from a FHIR R4 GraphDefinition to FHIR R5.
Element `GraphDefinition.meta` is mapped to FHIR R5 element `GraphDefinition.meta` as `Equivalent`.
Element `GraphDefinition.implicitRules` is mapped to FHIR R5 element `GraphDefinition.implicitRules` as `Equivalent`. Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.
Element `GraphDefinition.language` is mapped to FHIR R5 element `GraphDefinition.language` as `Equivalent`. Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).
Element `GraphDefinition.text` is mapped to FHIR R5 element `GraphDefinition.text` as `Equivalent`. Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.
Element `GraphDefinition.contained` is mapped to FHIR R5 element `GraphDefinition.contained` as `Equivalent`. This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.
Element `GraphDefinition.url` is mapped to FHIR R5 element `GraphDefinition.url` as `Equivalent`. Can be a urn:uuid: or a urn:oid: but real http: addresses are preferred. Multiple instances may share the same URL if they have a distinct version. The determination of when to create a new version of a resource (same url, new version) vs. defining a new artifact is up to the author. Considerations for making this decision are found in [Technical and Business Versions](https://hl7.org/fhir/resource..html#versions). In some cases, the resource can no longer be found at the stated url, but the url itself cannot change. Implementations can use the [meta.source](https://hl7.org/fhir/resou.html#meta) element to indicate where the current master source of the resource can be found.
Element `GraphDefinition.version` is mapped to FHIR R5 element `GraphDefinition.version` as `Equivalent`. There may be different graph definition instances that have the same identifier but different versions. The version can be appended to the url in a reference to allow a reference to a particular business version of the graph definition with the format [url]|[version].
Element `GraphDefinition.name` is mapped to FHIR R5 element `GraphDefinition.name` as `Equivalent`. The name is not expected to be globally unique. The name should be a simple alphanumeric type name to ensure that it is machine-processing friendly.
Element `GraphDefinition.status` is mapped to FHIR R5 element `GraphDefinition.status` as `Equivalent`. Allows filtering of graph definitions that are appropriate for use versus not.
Element `GraphDefinition.experimental` is mapped to FHIR R5 element `GraphDefinition.experimental` as `Equivalent`. Allows filtering of graph definitions that are appropriate for use versus not.
Element `GraphDefinition.date` is mapped to FHIR R5 element `GraphDefinition.date` as `Equivalent`. Note that this is not the same as the resource last-modified-date, since the resource may be a secondary representation of the graph definition. Additional specific dates may be added as extensions or be found by consulting Provenances associated with past versions of the resource.
Element `GraphDefinition.publisher` is mapped to FHIR R5 element `GraphDefinition.publisher` as `Equivalent`. Usually an organization but may be an individual. The publisher (or steward) of the graph definition is the organization or individual primarily responsible for the maintenance and upkeep of the graph definition. This is not necessarily the same individual or organization that developed and initially authored the content. The publisher is the primary point of contact for questions or issues with the graph definition. This item SHOULD be populated unless the information is available from context.
Element `GraphDefinition.contact` is mapped to FHIR R5 element `GraphDefinition.contact` as `Equivalent`. May be a web site, an email address, a telephone number, etc.
Element `GraphDefinition.description` is mapped to FHIR R5 element `GraphDefinition.description` as `Equivalent`. This description can be used to capture details such as why the graph definition was built, comments about misuse, instructions for clinical use and interpretation, literature references, examples from the paper world, etc. It is not a rendering of the graph definition as conveyed in the 'text' field of the resource itself. This item SHOULD be populated unless the information is available from context (e.g. the language of the graph definition is presumed to be the predominant language in the place the graph definition was created).
Element `GraphDefinition.useContext` is mapped to FHIR R5 element `GraphDefinition.useContext` as `Equivalent`. When multiple useContexts are specified, there is no expectation that all or any of the contexts apply.
Element `GraphDefinition.jurisdiction` is mapped to FHIR R5 element `GraphDefinition.jurisdiction` as `Equivalent`. It may be possible for the graph definition to be used in jurisdictions other than those for which it was originally designed or intended.
Element `GraphDefinition.purpose` is mapped to FHIR R5 element `GraphDefinition.purpose` as `Equivalent`. This element does not describe the usage of the graph definition. Instead, it provides traceability of ''why'' the resource is either needed or ''why'' it is defined as it is. This may be used to point to source materials or specifications that drove the structure of this graph definition.
Element `GraphDefinition.start` is mapped to FHIR R5 element `GraphDefinition.start` as `SourceIsBroaderThanTarget`. The mappings for `GraphDefinition.start` do not cover the following types: code. The mappings for `GraphDefinition.start` do not cover the following types based on type expansion: value.
Element `GraphDefinition.link` is mapped to FHIR R5 element `GraphDefinition.link` as `Equivalent`.
Element `GraphDefinition.link.path` is mapped to FHIR R5 element `GraphDefinition.link.path` as `Equivalent`. The path expression cannot contain a resolve() function. If there is no path, the link is a reverse lookup, using target.params. If the path is "*" then this means all references in the resource.
Element `GraphDefinition.link.sliceName` is mapped to FHIR R5 element `GraphDefinition.link.sliceName` as `Equivalent`.
Element `GraphDefinition.link.min` is mapped to FHIR R5 element `GraphDefinition.link.min` as `Equivalent`.
Element `GraphDefinition.link.max` is mapped to FHIR R5 element `GraphDefinition.link.max` as `Equivalent`.
Element `GraphDefinition.link.description` is mapped to FHIR R5 element `GraphDefinition.link.description` as `Equivalent`.
Element `GraphDefinition.profile` has a context of GraphDefinition based on following the parent source element upwards and mapping to `GraphDefinition`. Element `GraphDefinition.profile` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element). The code does not include the '$' prefix that is always included in the URL when the operation is invoked.
Element `GraphDefinition.link.target` has a context of GraphDefinition.link based on following the parent source element upwards and mapping to `GraphDefinition`. Element `GraphDefinition.link.target` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Element `GraphDefinition.link.target.type` is part of an existing definition because parent element `GraphDefinition.link.target` requires a cross-version extension. Element `GraphDefinition.link.target.type` has a context of GraphDefinition.link based on following the parent source element upwards and mapping to `GraphDefinition`. Element `GraphDefinition.link.target.type` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Element `GraphDefinition.link.target.params` is part of an existing definition because parent element `GraphDefinition.link.target` requires a cross-version extension. Element `GraphDefinition.link.target.params` has a context of GraphDefinition.link based on following the parent source element upwards and mapping to `GraphDefinition`. Element `GraphDefinition.link.target.params` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element). At least one of the parameters must have the value {ref} which identifies the focus resource.
Element `GraphDefinition.link.target.profile` is part of an existing definition because parent element `GraphDefinition.link.target` requires a cross-version extension. Element `GraphDefinition.link.target.profile` has a context of GraphDefinition.link based on following the parent source element upwards and mapping to `GraphDefinition`. Element `GraphDefinition.link.target.profile` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Element `GraphDefinition.link.target.compartment` is part of an existing definition because parent element `GraphDefinition.link.target` requires a cross-version extension. Element `GraphDefinition.link.target.compartment` has a context of GraphDefinition.link based on following the parent source element upwards and mapping to `GraphDefinition`. Element `GraphDefinition.link.target.compartment` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Element `GraphDefinition.link.target.compartment.use` is part of an existing definition because parent element `GraphDefinition.link.target.compartment` requires a cross-version extension. Element `GraphDefinition.link.target.compartment.use` has a context of GraphDefinition.link based on following the parent source element upwards and mapping to `GraphDefinition`. Element `GraphDefinition.link.target.compartment.use` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element). All conditional rules are evaluated; if they are true, then the rules are evaluated.
Element `GraphDefinition.link.target.compartment.code` is part of an existing definition because parent element `GraphDefinition.link.target.compartment` requires a cross-version extension. Element `GraphDefinition.link.target.compartment.code` has a context of GraphDefinition.link based on following the parent source element upwards and mapping to `GraphDefinition`. Element `GraphDefinition.link.target.compartment.code` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Element `GraphDefinition.link.target.compartment.rule` is part of an existing definition because parent element `GraphDefinition.link.target.compartment` requires a cross-version extension. Element `GraphDefinition.link.target.compartment.rule` has a context of GraphDefinition.link based on following the parent source element upwards and mapping to `GraphDefinition`. Element `GraphDefinition.link.target.compartment.rule` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Element `GraphDefinition.link.target.compartment.expression` is part of an existing definition because parent element `GraphDefinition.link.target.compartment` requires a cross-version extension. Element `GraphDefinition.link.target.compartment.expression` has a context of GraphDefinition.link based on following the parent source element upwards and mapping to `GraphDefinition`. Element `GraphDefinition.link.target.compartment.expression` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Element `GraphDefinition.link.target.compartment.description` is part of an existing definition because parent element `GraphDefinition.link.target.compartment` requires a cross-version extension. Element `GraphDefinition.link.target.compartment.description` has a context of GraphDefinition.link based on following the parent source element upwards and mapping to `GraphDefinition`. Element `GraphDefinition.link.target.compartment.description` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Element `GraphDefinition.link.target.link` is part of an existing definition because parent element `GraphDefinition.link.target` requires a cross-version extension. Element `GraphDefinition.link.target.link` has a context of GraphDefinition.link based on following the parent source element upwards and mapping to `GraphDefinition`. Element `GraphDefinition.link.target.link` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).