Extensions for Using Data Elements from FHIR R4 in FHIR STU3 - Downloaded Version null See the Directory of published versions
| Page standards status: Trial-use | Maturity Level: 0 |
Definitions for the profile-TestReport resource profile.
Guidance on how to interpret the contents of this table can be foundhere
| 0. TestReport | |
| Definition | A summary of information based on the results of executing a TestScript. |
| Short | Describes the results of a TestScript execution |
| Control | 0..* |
| Invariants | dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())dom-1: If the resource is contained in another resource, it SHALL NOT contain any narrative ( contained.text.empty())dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated ( contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource ( contained.where(('#'+id in %resource.descendants().reference).not()).empty())dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty()) dom-1: If the resource is contained in another resource, it SHALL NOT contain any narrative (contained.text.empty()) dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()) dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource (contained.where(('#'+id in %resource.descendants().reference).not()).empty()) |
| 2. TestReport.implicitRules | |
| Definition | A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. |
| Short | A set of rules under which this content was created |
| Comments | Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. This element is labelled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation. |
| Control | 0..1 |
| Type | uri |
| Is Modifier | true because No Modifier Reason provideed in previous versions of FHIR |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| 4. TestReport.modifierExtension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the resource, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. |
| Short | Extensions that cannot be ignored |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | true because No Modifier Reason provideed in previous versions of FHIR |
| Alternate Names | extensions, user content |
| 6. TestReport.status | |
| Definition | The current state of this test report. |
| Short | completed | in-progress | waiting | stopped | entered-in-error |
| Comments | The status represents where the execution is currently within the test script execution life cycle. This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid. |
| Control | 1..1 |
| Binding | The codes SHALL be taken from TestReportStatushttp://hl7.org/fhir/ValueSet/report-status-codes|3.0.2 (required to http://hl7.org/fhir/ValueSet/report-status-codes|3.0.2)The current status of the test report. |
| Type | code |
| Is Modifier | true because No Modifier Reason provideed in previous versions of FHIR |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| 8. TestReport.testScript | |
| Definition | Ideally this is an absolute URL that is used to identify the version-specific TestScript that was executed, matching the |
| Short | Reference to the version-specific TestScript that was executed to produce this TestReport |
| Control | 1..1 |
| Type | Reference(TestScript) |
| Summary | true |
| 10. TestReport.result | |
| Definition | The overall result from the execution of the TestScript. |
| Short | pass | fail | pending |
| Comments | The pass and fail result represents a completed test script execution. The pending result represents a test script execution that has not yet started or is currently in progress. |
| Control | 1..1 |
| Binding | The codes SHALL be taken from TestReportResulthttp://hl7.org/fhir/ValueSet/report-result-codes|3.0.2 (required to http://hl7.org/fhir/ValueSet/report-result-codes|3.0.2)The reported execution result. |
| Type | code |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
Guidance on how to interpret the contents of this table can be foundhere
| 0. TestReport |
Guidance on how to interpret the contents of this table can be foundhere
| 0. TestReport | |||||
| Definition | A summary of information based on the results of executing a TestScript. | ||||
| Short | Describes the results of a TestScript execution | ||||
| Control | 0..* | ||||
| Invariants | dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())dom-1: If the resource is contained in another resource, it SHALL NOT contain any narrative ( contained.text.empty())dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated ( contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource ( contained.where(('#'+id in %resource.descendants().reference).not()).empty()) | ||||
| 2. TestReport.id | |||||
| Definition | The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes. | ||||
| Short | Logical id of this artifact | ||||
| Comments | The only time that a resource does not have an id is when it is being submitted to the server using a create operation. | ||||
| Control | 0..1 | ||||
| Type | id | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| Summary | true | ||||
| 4. TestReport.meta | |||||
| Definition | The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content may not always be associated with version changes to the resource. | ||||
| Short | Metadata about the resource | ||||
| Control | 0..1 | ||||
| Type | Meta | ||||
| Summary | true | ||||
| 6. TestReport.implicitRules | |||||
| Definition | A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. | ||||
| Short | A set of rules under which this content was created | ||||
| Comments | Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. This element is labelled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation. | ||||
| Control | 0..1 | ||||
| Type | uri | ||||
| Is Modifier | true because No Modifier Reason provideed in previous versions of FHIR | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| Summary | true | ||||
| 8. TestReport.language | |||||
| Definition | The base language in which the resource is written. | ||||
| Short | Language of the resource content | ||||
| Comments | Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute). | ||||
| Control | 0..1 | ||||
| Binding | Unless not suitable, these codes SHALL be taken from Common Languages (extensible to http://hl7.org/fhir/ValueSet/languages|3.0.2)A human language.
| ||||
| Type | code | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| 10. TestReport.text | |||||
| Definition | A human-readable narrative that contains a summary of the resource, and may be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety. | ||||
| Short | Text summary of the resource, for human interpretation | ||||
| Comments | Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded in formation is added later. | ||||
| Control | 0..1 This element is affected by the following invariants: dom-1 | ||||
| Type | Narrative | ||||
| Alternate Names | narrative, html, xhtml, display | ||||
| 12. TestReport.contained | |||||
| Definition | These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope. | ||||
| Short | Contained, inline Resources | ||||
| Comments | This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. | ||||
| Control | 0..* | ||||
| Type | Resource | ||||
| Alternate Names | inline resources, anonymous resources, contained resources | ||||
| 14. TestReport.extension | |||||
| Definition | May be used to represent additional information that is not part of the basic definition of the resource. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
| Short | Additional Content defined by implementations | ||||
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
| Control | 0..* | ||||
| Type | Extension | ||||
| Alternate Names | extensions, user content | ||||
| 16. TestReport.modifierExtension | |||||
| Definition | May be used to represent additional information that is not part of the basic definition of the resource, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. | ||||
| Short | Extensions that cannot be ignored | ||||
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
| Control | 0..* | ||||
| Type | Extension | ||||
| Is Modifier | true because No Modifier Reason provideed in previous versions of FHIR | ||||
| Alternate Names | extensions, user content | ||||
| 18. TestReport.identifier | |||||
| Definition | Identifier for the TestScript assigned for external purposes outside the context of FHIR. | ||||
| Short | External identifier | ||||
| Note | This is a business identifier, not a resource identifier (see discussion) | ||||
| Control | 0..1 | ||||
| Type | Identifier | ||||
| Summary | true | ||||
| 20. TestReport.name | |||||
| Definition | A free text natural language name identifying the executed TestScript. | ||||
| Short | Informal name of the executed TestScript | ||||
| Comments | Not expected to be globally unique. | ||||
| Control | 0..1 | ||||
| Type | string | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| Summary | true | ||||
| 22. TestReport.status | |||||
| Definition | The current state of this test report. | ||||
| Short | completed | in-progress | waiting | stopped | entered-in-error | ||||
| Comments | The status represents where the execution is currently within the test script execution life cycle. This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid. | ||||
| Control | 1..1 | ||||
| Binding | The codes SHALL be taken from TestReportStatus (required to http://hl7.org/fhir/ValueSet/report-status-codes|3.0.2)The current status of the test report. | ||||
| Type | code | ||||
| Is Modifier | true because No Modifier Reason provideed in previous versions of FHIR | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| Summary | true | ||||
| 24. TestReport.testScript | |||||
| Definition | Ideally this is an absolute URL that is used to identify the version-specific TestScript that was executed, matching the | ||||
| Short | Reference to the version-specific TestScript that was executed to produce this TestReport | ||||
| Control | 1..1 | ||||
| Type | Reference(TestScript) | ||||
| Summary | true | ||||
| 26. TestReport.result | |||||
| Definition | The overall result from the execution of the TestScript. | ||||
| Short | pass | fail | pending | ||||
| Comments | The pass and fail result represents a completed test script execution. The pending result represents a test script execution that has not yet started or is currently in progress. | ||||
| Control | 1..1 | ||||
| Binding | The codes SHALL be taken from TestReportResult (required to http://hl7.org/fhir/ValueSet/report-result-codes|3.0.2)The reported execution result. | ||||
| Type | code | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| Summary | true | ||||
| 28. TestReport.score | |||||
| Definition | The final score (percentage of tests passed) resulting from the execution of the TestScript. | ||||
| Short | The final score (percentage of tests passed) resulting from the execution of the TestScript | ||||
| Control | 0..1 | ||||
| Type | decimal | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| Summary | true | ||||
| 30. TestReport.tester | |||||
| Definition | Name of the tester producing this report (Organization or individual). | ||||
| Short | Name of the tester producing this report (Organization or individual) | ||||
| Comments | Usually an organization, but may be an individual. This item SHOULD be populated unless the information is available from context. | ||||
| Control | 0..1 | ||||
| Type | string | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| Summary | true | ||||
| Requirements | Helps establish the "authority/credibility" of the TestReport. May also allow for contact. | ||||
| 32. TestReport.issued | |||||
| Definition | When the TestScript was executed and this TestReport was generated. | ||||
| Short | When the TestScript was executed and this TestReport was generated | ||||
| Comments | Additional specific dates may be added as extensions. | ||||
| Control | 0..1 | ||||
| Type | dateTime | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| Summary | true | ||||
| 34. TestReport.participant | |||||
| Definition | A participant in the test execution, either the execution engine, a client, or a server. | ||||
| Short | A participant in the test execution, either the execution engine, a client, or a server | ||||
| Control | 0..* | ||||
| Type | BackboneElement | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count())) | ||||
| 36. TestReport.participant.id | |||||
| Definition | unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
| Short | xml:id (or equivalent in JSON) | ||||
| Control | 0..1 | ||||
| Type | string | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| XML Format | In the XML format, this property is represented as an attribute. | ||||
| 38. TestReport.participant.extension | |||||
| Definition | May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
| Short | Additional Content defined by implementations | ||||
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
| Control | 0..* | ||||
| Type | Extension | ||||
| Alternate Names | extensions, user content | ||||
| 40. TestReport.participant.modifierExtension | |||||
| Definition | May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. | ||||
| Short | Extensions that cannot be ignored | ||||
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
| Control | 0..* | ||||
| Type | Extension | ||||
| Is Modifier | true because No Modifier Reason provideed in previous versions of FHIR | ||||
| Summary | true | ||||
| Alternate Names | extensions, user content, modifiers | ||||
| 42. TestReport.participant.type | |||||
| Definition | The type of participant. | ||||
| Short | test-engine | client | server | ||||
| Control | 1..1 | ||||
| Binding | The codes SHALL be taken from TestReportParticipantType (required to http://hl7.org/fhir/ValueSet/report-participant-type|3.0.2)The type of participant. | ||||
| Type | code | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| 44. TestReport.participant.uri | |||||
| Definition | The uri of the participant. An absolute URL is preferred. | ||||
| Short | The uri of the participant. An absolute URL is preferred | ||||
| Control | 1..1 | ||||
| Type | uri | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| 46. TestReport.participant.display | |||||
| Definition | The display name of the participant. | ||||
| Short | The display name of the participant | ||||
| Control | 0..1 | ||||
| Type | string | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| 48. TestReport.setup | |||||
| Definition | The results of the series of required setup operations before the tests were executed. | ||||
| Short | The results of the series of required setup operations before the tests were executed | ||||
| Control | 0..1 | ||||
| Type | BackboneElement | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count())) | ||||
| 50. TestReport.setup.id | |||||
| Definition | unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
| Short | xml:id (or equivalent in JSON) | ||||
| Control | 0..1 | ||||
| Type | string | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| XML Format | In the XML format, this property is represented as an attribute. | ||||
| 52. TestReport.setup.extension | |||||
| Definition | May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
| Short | Additional Content defined by implementations | ||||
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
| Control | 0..* | ||||
| Type | Extension | ||||
| Alternate Names | extensions, user content | ||||
| 54. TestReport.setup.modifierExtension | |||||
| Definition | May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. | ||||
| Short | Extensions that cannot be ignored | ||||
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
| Control | 0..* | ||||
| Type | Extension | ||||
| Is Modifier | true because No Modifier Reason provideed in previous versions of FHIR | ||||
| Summary | true | ||||
| Alternate Names | extensions, user content, modifiers | ||||
| 56. TestReport.setup.action | |||||
| Definition | Action would contain either an operation or an assertion. | ||||
| Short | A setup operation or assert that was executed | ||||
| Comments | An action should contain either an operation or an assertion but not both. It can contain any number of variables. | ||||
| Control | 1..* | ||||
| Type | BackboneElement | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))inv-1: Setup action SHALL contain either an operation or assert but not both. ( operation.exists() xor assert.exists()) | ||||
| 58. TestReport.setup.action.id | |||||
| Definition | unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
| Short | xml:id (or equivalent in JSON) | ||||
| Control | 0..1 | ||||
| Type | string | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| XML Format | In the XML format, this property is represented as an attribute. | ||||
| 60. TestReport.setup.action.extension | |||||
| Definition | May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
| Short | Additional Content defined by implementations | ||||
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
| Control | 0..* | ||||
| Type | Extension | ||||
| Alternate Names | extensions, user content | ||||
| 62. TestReport.setup.action.modifierExtension | |||||
| Definition | May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. | ||||
| Short | Extensions that cannot be ignored | ||||
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
| Control | 0..* | ||||
| Type | Extension | ||||
| Is Modifier | true because No Modifier Reason provideed in previous versions of FHIR | ||||
| Summary | true | ||||
| Alternate Names | extensions, user content, modifiers | ||||
| 64. TestReport.setup.action.operation | |||||
| Definition | The operation performed. | ||||
| Short | The operation to perform | ||||
| Control | 0..1 | ||||
| Type | BackboneElement | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count())) | ||||
| 66. TestReport.setup.action.operation.id | |||||
| Definition | unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
| Short | xml:id (or equivalent in JSON) | ||||
| Control | 0..1 | ||||
| Type | string | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| XML Format | In the XML format, this property is represented as an attribute. | ||||
| 68. TestReport.setup.action.operation.extension | |||||
| Definition | May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
| Short | Additional Content defined by implementations | ||||
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
| Control | 0..* | ||||
| Type | Extension | ||||
| Alternate Names | extensions, user content | ||||
| 70. TestReport.setup.action.operation.modifierExtension | |||||
| Definition | May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. | ||||
| Short | Extensions that cannot be ignored | ||||
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
| Control | 0..* | ||||
| Type | Extension | ||||
| Is Modifier | true because No Modifier Reason provideed in previous versions of FHIR | ||||
| Summary | true | ||||
| Alternate Names | extensions, user content, modifiers | ||||
| 72. TestReport.setup.action.operation.result | |||||
| Definition | The result of this operation. | ||||
| Short | pass | skip | fail | warning | error | ||||
| Control | 1..1 | ||||
| Binding | The codes SHALL be taken from TestReportActionResult (required to http://hl7.org/fhir/ValueSet/report-action-result-codes|3.0.2)The results of executing an action. | ||||
| Type | code | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| 74. TestReport.setup.action.operation.message | |||||
| Definition | An explanatory message associated with the result. | ||||
| Short | A message associated with the result | ||||
| Control | 0..1 | ||||
| Type | markdown | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| 76. TestReport.setup.action.operation.detail | |||||
| Definition | A link to further details on the result. | ||||
| Short | A link to further details on the result | ||||
| Control | 0..1 | ||||
| Type | uri | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| 78. TestReport.setup.action.assert | |||||
| Definition | The results of the assertion performed on the previous operations. | ||||
| Short | The assertion to perform | ||||
| Control | 0..1 | ||||
| Type | BackboneElement | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count())) | ||||
| 80. TestReport.setup.action.assert.id | |||||
| Definition | unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
| Short | xml:id (or equivalent in JSON) | ||||
| Control | 0..1 | ||||
| Type | string | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| XML Format | In the XML format, this property is represented as an attribute. | ||||
| 82. TestReport.setup.action.assert.extension | |||||
| Definition | May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
| Short | Additional Content defined by implementations | ||||
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
| Control | 0..* | ||||
| Type | Extension | ||||
| Alternate Names | extensions, user content | ||||
| 84. TestReport.setup.action.assert.modifierExtension | |||||
| Definition | May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. | ||||
| Short | Extensions that cannot be ignored | ||||
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
| Control | 0..* | ||||
| Type | Extension | ||||
| Is Modifier | true because No Modifier Reason provideed in previous versions of FHIR | ||||
| Summary | true | ||||
| Alternate Names | extensions, user content, modifiers | ||||
| 86. TestReport.setup.action.assert.result | |||||
| Definition | The result of this assertion. | ||||
| Short | pass | skip | fail | warning | error | ||||
| Control | 1..1 | ||||
| Binding | The codes SHALL be taken from TestReportActionResult (required to http://hl7.org/fhir/ValueSet/report-action-result-codes|3.0.2)The results of executing an action. | ||||
| Type | code | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| 88. TestReport.setup.action.assert.message | |||||
| Definition | An explanatory message associated with the result. | ||||
| Short | A message associated with the result | ||||
| Control | 0..1 | ||||
| Type | markdown | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| 90. TestReport.setup.action.assert.detail | |||||
| Definition | A link to further details on the result. | ||||
| Short | A link to further details on the result | ||||
| Control | 0..1 | ||||
| Type | string | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| 92. TestReport.test | |||||
| Definition | A test executed from the test script. | ||||
| Short | A test executed from the test script | ||||
| Control | 0..* | ||||
| Type | BackboneElement | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count())) | ||||
| 94. TestReport.test.id | |||||
| Definition | unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
| Short | xml:id (or equivalent in JSON) | ||||
| Control | 0..1 | ||||
| Type | string | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| XML Format | In the XML format, this property is represented as an attribute. | ||||
| 96. TestReport.test.extension | |||||
| Definition | May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
| Short | Additional Content defined by implementations | ||||
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
| Control | 0..* | ||||
| Type | Extension | ||||
| Alternate Names | extensions, user content | ||||
| 98. TestReport.test.modifierExtension | |||||
| Definition | May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. | ||||
| Short | Extensions that cannot be ignored | ||||
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
| Control | 0..* | ||||
| Type | Extension | ||||
| Is Modifier | true because No Modifier Reason provideed in previous versions of FHIR | ||||
| Summary | true | ||||
| Alternate Names | extensions, user content, modifiers | ||||
| 100. TestReport.test.name | |||||
| Definition | The name of this test used for tracking/logging purposes by test engines. | ||||
| Short | Tracking/logging name of this test | ||||
| Control | 0..1 | ||||
| Type | string | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| 102. TestReport.test.description | |||||
| Definition | A short description of the test used by test engines for tracking and reporting purposes. | ||||
| Short | Tracking/reporting short description of the test | ||||
| Control | 0..1 | ||||
| Type | string | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| 104. TestReport.test.action | |||||
| Definition | Action would contain either an operation or an assertion. | ||||
| Short | A test operation or assert that was performed | ||||
| Comments | An action should contain either an operation or an assertion but not both. It can contain any number of variables. | ||||
| Control | 1..* | ||||
| Type | BackboneElement | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))inv-2: Test action SHALL contain either an operation or assert but not both. ( operation.exists() xor assert.exists()) | ||||
| 106. TestReport.test.action.id | |||||
| Definition | unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
| Short | xml:id (or equivalent in JSON) | ||||
| Control | 0..1 | ||||
| Type | string | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| XML Format | In the XML format, this property is represented as an attribute. | ||||
| 108. TestReport.test.action.extension | |||||
| Definition | May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
| Short | Additional Content defined by implementations | ||||
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
| Control | 0..* | ||||
| Type | Extension | ||||
| Alternate Names | extensions, user content | ||||
| 110. TestReport.test.action.modifierExtension | |||||
| Definition | May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. | ||||
| Short | Extensions that cannot be ignored | ||||
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
| Control | 0..* | ||||
| Type | Extension | ||||
| Is Modifier | true because No Modifier Reason provideed in previous versions of FHIR | ||||
| Summary | true | ||||
| Alternate Names | extensions, user content, modifiers | ||||
| 112. TestReport.test.action.operation | |||||
| Definition | An operation would involve a REST request to a server. | ||||
| Short | The operation performed | ||||
| Control | 0..1 | ||||
| Type | Seettp://hl7.org/fhir/StructureDefinition/TestReport#TestReport.setup.action.operation | ||||
| 114. TestReport.test.action.assert | |||||
| Definition | The results of the assertion performed on the previous operations. | ||||
| Short | The assertion performed | ||||
| Control | 0..1 | ||||
| Type | Seettp://hl7.org/fhir/StructureDefinition/TestReport#TestReport.setup.action.assert | ||||
| 116. TestReport.teardown | |||||
| Definition | The results of the series of operations required to clean up after the all the tests were executed (successfully or otherwise). | ||||
| Short | The results of running the series of required clean up steps | ||||
| Control | 0..1 | ||||
| Type | BackboneElement | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count())) | ||||
| 118. TestReport.teardown.id | |||||
| Definition | unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
| Short | xml:id (or equivalent in JSON) | ||||
| Control | 0..1 | ||||
| Type | string | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| XML Format | In the XML format, this property is represented as an attribute. | ||||
| 120. TestReport.teardown.extension | |||||
| Definition | May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
| Short | Additional Content defined by implementations | ||||
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
| Control | 0..* | ||||
| Type | Extension | ||||
| Alternate Names | extensions, user content | ||||
| 122. TestReport.teardown.modifierExtension | |||||
| Definition | May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. | ||||
| Short | Extensions that cannot be ignored | ||||
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
| Control | 0..* | ||||
| Type | Extension | ||||
| Is Modifier | true because No Modifier Reason provideed in previous versions of FHIR | ||||
| Summary | true | ||||
| Alternate Names | extensions, user content, modifiers | ||||
| 124. TestReport.teardown.action | |||||
| Definition | The teardown action will only contain an operation. | ||||
| Short | One or more teardown operations performed | ||||
| Comments | An action should contain either an operation or an assertion but not both. It can contain any number of variables. | ||||
| Control | 1..* | ||||
| Type | BackboneElement | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count())) | ||||
| 126. TestReport.teardown.action.id | |||||
| Definition | unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
| Short | xml:id (or equivalent in JSON) | ||||
| Control | 0..1 | ||||
| Type | string | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| XML Format | In the XML format, this property is represented as an attribute. | ||||
| 128. TestReport.teardown.action.extension | |||||
| Definition | May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
| Short | Additional Content defined by implementations | ||||
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
| Control | 0..* | ||||
| Type | Extension | ||||
| Alternate Names | extensions, user content | ||||
| 130. TestReport.teardown.action.modifierExtension | |||||
| Definition | May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. | ||||
| Short | Extensions that cannot be ignored | ||||
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
| Control | 0..* | ||||
| Type | Extension | ||||
| Is Modifier | true because No Modifier Reason provideed in previous versions of FHIR | ||||
| Summary | true | ||||
| Alternate Names | extensions, user content, modifiers | ||||
| 132. TestReport.teardown.action.operation | |||||
| Definition | An operation would involve a REST request to a server. | ||||
| Short | The teardown operation performed | ||||
| Control | 1..1 | ||||
| Type | Seettp://hl7.org/fhir/StructureDefinition/TestReport#TestReport.setup.action.operation | ||||