Extensions for Using Data Elements from FHIR R4 in FHIR STU3
0.1.0 - STU International flag

Extensions for Using Data Elements from FHIR R4 in FHIR STU3 - Downloaded Version null See the Directory of published versions

Resource Profile: Profile_R4_SubstanceSourceMaterial_R3 - Detailed Descriptions

Page standards status: Trial-use Maturity Level: 0

Definitions for the profile-SubstanceSourceMaterial resource profile.

Guidance on how to interpret the contents of this table can be foundhere

0. Basic
Definition

Basic is used for handling concepts not yet defined in FHIR, narrative-only resources that don't map to an existing resource, and custom resources not appropriate for inclusion in the FHIR specification.

ShortResource for non-supported content
Control0..*
Alternate NamesZ-resource, Extension-resource, Custom-resource
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-1: If the resource is contained in another resource, it SHALL NOT contain any narrative (contained.text.empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource (contained.where(('#'+id in %resource.descendants().reference).not()).empty())
dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-1: If the resource is contained in another resource, it SHALL NOT contain any narrative (contained.text.empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource (contained.where(('#'+id in %resource.descendants().reference).not()).empty())
2. Basic.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element.

This element is labelled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation.

Control0..1
Typeuri
Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
4. Basic.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the resource. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional Content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Alternate Namesextensions, user content
SlicingThis element introduces a set of slices on Basic.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 6. Basic.extension:sourceMaterialClass
    Slice NamesourceMaterialClass
    Definition

    R4: SubstanceSourceMaterial.sourceMaterialClass (new:CodeableConcept)

    ShortR4: General high level classification of the source material specific to the origin of the material (new)
    Comments

    Element SubstanceSourceMaterial.sourceMaterialClass is not mapped to FHIR STU3, since FHIR R4 SubstanceSourceMaterial is not mapped. Element SubstanceSourceMaterial.sourceMaterialClass has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(R4: General high level classification of the source material specific to the origin of the material (new)) (Extension Type: CodeableConcept)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    8. Basic.extension:sourceMaterialType
    Slice NamesourceMaterialType
    Definition

    R4: SubstanceSourceMaterial.sourceMaterialType (new:CodeableConcept)

    ShortR4: The type of the source material shall be specified based on a controlled vocabulary. For vaccines, this subclause refers to the class of infectious agent (new)
    Comments

    Element SubstanceSourceMaterial.sourceMaterialType is not mapped to FHIR STU3, since FHIR R4 SubstanceSourceMaterial is not mapped. Element SubstanceSourceMaterial.sourceMaterialType has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(R4: The type of the source material shall be specified based on a controlled vocabulary. For vaccines, this subclause refers to the class of infectious agent (new)) (Extension Type: CodeableConcept)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    10. Basic.extension:sourceMaterialState
    Slice NamesourceMaterialState
    Definition

    R4: SubstanceSourceMaterial.sourceMaterialState (new:CodeableConcept)

    ShortR4: The state of the source material when extracted (new)
    Comments

    Element SubstanceSourceMaterial.sourceMaterialState is not mapped to FHIR STU3, since FHIR R4 SubstanceSourceMaterial is not mapped. Element SubstanceSourceMaterial.sourceMaterialState has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(R4: The state of the source material when extracted (new)) (Extension Type: CodeableConcept)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    12. Basic.extension:organismId
    Slice NameorganismId
    Definition

    R4: SubstanceSourceMaterial.organismId (new:Identifier)

    ShortR4: The unique identifier associated with the source material parent organism shall be specified (new)
    Comments

    Element SubstanceSourceMaterial.organismId is not mapped to FHIR STU3, since FHIR R4 SubstanceSourceMaterial is not mapped. Element SubstanceSourceMaterial.organismId has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(R4: The unique identifier associated with the source material parent organism shall be specified (new)) (Extension Type: Identifier)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    14. Basic.extension:organismName
    Slice NameorganismName
    Definition

    R4: SubstanceSourceMaterial.organismName (new:string)

    ShortR4: The organism accepted Scientific name shall be provided based on the organism taxonomy (new)
    Comments

    Element SubstanceSourceMaterial.organismName is not mapped to FHIR STU3, since FHIR R4 SubstanceSourceMaterial is not mapped. Element SubstanceSourceMaterial.organismName has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(R4: The organism accepted Scientific name shall be provided based on the organism taxonomy (new)) (Extension Type: string)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    16. Basic.extension:parentSubstanceId
    Slice NameparentSubstanceId
    Definition

    R4: SubstanceSourceMaterial.parentSubstanceId (new:Identifier)

    ShortR4: The parent of the herbal drug Ginkgo biloba, Leaf is the substance ID of the substance (fresh) of Ginkgo biloba L. or Ginkgo biloba L. (Whole plant) (new)
    Comments

    Element SubstanceSourceMaterial.parentSubstanceId is not mapped to FHIR STU3, since FHIR R4 SubstanceSourceMaterial is not mapped. Element SubstanceSourceMaterial.parentSubstanceId has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension(R4: The parent of the herbal drug Ginkgo biloba, Leaf is the substance ID of the substance (fresh) of Ginkgo biloba L. or Ginkgo biloba L. (Whole plant) (new)) (Extension Type: Identifier)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    18. Basic.extension:parentSubstanceName
    Slice NameparentSubstanceName
    Definition

    R4: SubstanceSourceMaterial.parentSubstanceName (new:string)

    ShortR4: The parent substance of the Herbal Drug, or Herbal preparation (new)
    Comments

    Element SubstanceSourceMaterial.parentSubstanceName is not mapped to FHIR STU3, since FHIR R4 SubstanceSourceMaterial is not mapped. Element SubstanceSourceMaterial.parentSubstanceName has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension(R4: The parent substance of the Herbal Drug, or Herbal preparation (new)) (Extension Type: string)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    20. Basic.extension:countryOfOrigin
    Slice NamecountryOfOrigin
    Definition

    R4: SubstanceSourceMaterial.countryOfOrigin (new:CodeableConcept)

    ShortR4: The country where the plant material is harvested or the countries where the plasma is sourced from as laid down in accordance with the Plasma Master File. For “Plasma-derived substances” the attribute country of origin provides information about the countries used for the manufacturing of the Cryopoor plama or Crioprecipitate (new)
    Comments

    Element SubstanceSourceMaterial.countryOfOrigin is not mapped to FHIR STU3, since FHIR R4 SubstanceSourceMaterial is not mapped. Element SubstanceSourceMaterial.countryOfOrigin has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension(R4: The country where the plant material is harvested or the countries where the plasma is sourced from as laid down in accordance with the Plasma Master File. For “Plasma-derived substances” the attribute country of origin provides information about the countries used for the manufacturing of the Cryopoor plama or Crioprecipitate (new)) (Extension Type: CodeableConcept)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    22. Basic.extension:geographicalLocation
    Slice NamegeographicalLocation
    Definition

    R4: SubstanceSourceMaterial.geographicalLocation (new:string)

    ShortR4: The place/region where the plant is harvested or the places/regions where the animal source material has its habitat (new)
    Comments

    Element SubstanceSourceMaterial.geographicalLocation is not mapped to FHIR STU3, since FHIR R4 SubstanceSourceMaterial is not mapped. Element SubstanceSourceMaterial.geographicalLocation has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension(R4: The place/region where the plant is harvested or the places/regions where the animal source material has its habitat (new)) (Extension Type: string)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    24. Basic.extension:developmentStage
    Slice NamedevelopmentStage
    Definition

    R4: SubstanceSourceMaterial.developmentStage (new:CodeableConcept)

    ShortR4: Stage of life for animals, plants, insects and microorganisms. This information shall be provided only when the substance is significantly different in these stages (e.g. foetal bovine serum) (new)
    Comments

    Element SubstanceSourceMaterial.developmentStage is not mapped to FHIR STU3, since FHIR R4 SubstanceSourceMaterial is not mapped. Element SubstanceSourceMaterial.developmentStage has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(R4: Stage of life for animals, plants, insects and microorganisms. This information shall be provided only when the substance is significantly different in these stages (e.g. foetal bovine serum) (new)) (Extension Type: CodeableConcept)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    26. Basic.extension:fractionDescription
    Slice NamefractionDescription
    Definition

    R4: SubstanceSourceMaterial.fractionDescription (new:BackboneElement)

    ShortR4: Many complex materials are fractions of parts of plants, animals, or minerals. Fraction elements are often necessary to define both Substances and Specified Group 1 Substances. For substances derived from Plants, fraction information will be captured at the Substance information level ( . Oils, Juices and Exudates). Additional information for Extracts, such as extraction solvent composition, will be captured at the Specified Substance Group 1 information level. For plasma-derived products fraction information will be captured at the Substance and the Specified Substance Group 1 levels (new)
    Comments

    Element SubstanceSourceMaterial.fractionDescription is not mapped to FHIR STU3, since FHIR R4 SubstanceSourceMaterial is not mapped. Element SubstanceSourceMaterial.fractionDescription has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension(R4: Many complex materials are fractions of parts of plants, animals, or minerals. Fraction elements are often necessary to define both Substances and Specified Group 1 Substances. For substances derived from Plants, fraction information will be captured at the Substance information level ( . Oils, Juices and Exudates). Additional information for Extracts, such as extraction solvent composition, will be captured at the Specified Substance Group 1 information level. For plasma-derived products fraction information will be captured at the Substance and the Specified Substance Group 1 levels (new)) (Complex Extension)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    28. Basic.extension:organism
    Slice Nameorganism
    Definition

    R4: SubstanceSourceMaterial.organism (new:BackboneElement)

    ShortR4: This subclause describes the organism which the substance is derived from. For vaccines, the parent organism shall be specified based on these subclause elements. As an example, full taxonomy will be described for the Substance Name: ., Leaf (new)
    Comments

    Element SubstanceSourceMaterial.organism is not mapped to FHIR STU3, since FHIR R4 SubstanceSourceMaterial is not mapped. Element SubstanceSourceMaterial.organism has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(R4: This subclause describes the organism which the substance is derived from. For vaccines, the parent organism shall be specified based on these subclause elements. As an example, full taxonomy will be described for the Substance Name: ., Leaf (new)) (Complex Extension)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    30. Basic.extension:partDescription
    Slice NamepartDescription
    Definition

    R4: SubstanceSourceMaterial.partDescription (new:BackboneElement)

    ShortR4: To do (new)
    Comments

    Element SubstanceSourceMaterial.partDescription is not mapped to FHIR STU3, since FHIR R4 SubstanceSourceMaterial is not mapped. Element SubstanceSourceMaterial.partDescription has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension(R4: To do (new)) (Complex Extension)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    32. Basic.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the resource, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    ShortExtensions that cannot be ignored
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
    Alternate Namesextensions, user content
    34. Basic.code
    Definition

    Identifies the 'type' of resource - equivalent to the resource name for other resources.

    ShortKind of Resource
    Comments

    Because resource references will only be able to indicate 'Basic', the type of reference will need to be specified in a Profile identified as part of the resource. Refer to the resource notes section for information on appropriate terminologies for this code.

    This element is labeled as a modifier because the it defines the meaning of the resource and cannot be ignored.

    Control1..1
    BindingFor example codes, see Basic Resource Typeshttp://hl7.org/fhir/ValueSet/basic-resource-type|3.0.2
    (example to http://hl7.org/fhir/ValueSet/basic-resource-type|3.0.2)

    Codes for identifying types of resources not yet defined by FHIR

    TypeCodeableConcept
    Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
    Summarytrue
    Requirements

    Must be able to distinguish different types of Basic resources.

    Guidance on how to interpret the contents of this table can be foundhere

    0. Basic
    2. Basic.extension
    Control0..*
    SlicingThis element introduces a set of slices on Basic.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • 4. Basic.extension:sourceMaterialClass
      Slice NamesourceMaterialClass
      Definition

      R4: SubstanceSourceMaterial.sourceMaterialClass (new:CodeableConcept)

      ShortR4: General high level classification of the source material specific to the origin of the material (new)
      Comments

      Element SubstanceSourceMaterial.sourceMaterialClass is not mapped to FHIR STU3, since FHIR R4 SubstanceSourceMaterial is not mapped. Element SubstanceSourceMaterial.sourceMaterialClass has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      Control0..1
      TypeExtension(R4: General high level classification of the source material specific to the origin of the material (new)) (Extension Type: CodeableConcept)
      6. Basic.extension:sourceMaterialType
      Slice NamesourceMaterialType
      Definition

      R4: SubstanceSourceMaterial.sourceMaterialType (new:CodeableConcept)

      ShortR4: The type of the source material shall be specified based on a controlled vocabulary. For vaccines, this subclause refers to the class of infectious agent (new)
      Comments

      Element SubstanceSourceMaterial.sourceMaterialType is not mapped to FHIR STU3, since FHIR R4 SubstanceSourceMaterial is not mapped. Element SubstanceSourceMaterial.sourceMaterialType has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      Control0..1
      TypeExtension(R4: The type of the source material shall be specified based on a controlled vocabulary. For vaccines, this subclause refers to the class of infectious agent (new)) (Extension Type: CodeableConcept)
      8. Basic.extension:sourceMaterialState
      Slice NamesourceMaterialState
      Definition

      R4: SubstanceSourceMaterial.sourceMaterialState (new:CodeableConcept)

      ShortR4: The state of the source material when extracted (new)
      Comments

      Element SubstanceSourceMaterial.sourceMaterialState is not mapped to FHIR STU3, since FHIR R4 SubstanceSourceMaterial is not mapped. Element SubstanceSourceMaterial.sourceMaterialState has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      Control0..1
      TypeExtension(R4: The state of the source material when extracted (new)) (Extension Type: CodeableConcept)
      10. Basic.extension:organismId
      Slice NameorganismId
      Definition

      R4: SubstanceSourceMaterial.organismId (new:Identifier)

      ShortR4: The unique identifier associated with the source material parent organism shall be specified (new)
      Comments

      Element SubstanceSourceMaterial.organismId is not mapped to FHIR STU3, since FHIR R4 SubstanceSourceMaterial is not mapped. Element SubstanceSourceMaterial.organismId has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      Control0..1
      TypeExtension(R4: The unique identifier associated with the source material parent organism shall be specified (new)) (Extension Type: Identifier)
      12. Basic.extension:organismName
      Slice NameorganismName
      Definition

      R4: SubstanceSourceMaterial.organismName (new:string)

      ShortR4: The organism accepted Scientific name shall be provided based on the organism taxonomy (new)
      Comments

      Element SubstanceSourceMaterial.organismName is not mapped to FHIR STU3, since FHIR R4 SubstanceSourceMaterial is not mapped. Element SubstanceSourceMaterial.organismName has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      Control0..1
      TypeExtension(R4: The organism accepted Scientific name shall be provided based on the organism taxonomy (new)) (Extension Type: string)
      14. Basic.extension:parentSubstanceId
      Slice NameparentSubstanceId
      Definition

      R4: SubstanceSourceMaterial.parentSubstanceId (new:Identifier)

      ShortR4: The parent of the herbal drug Ginkgo biloba, Leaf is the substance ID of the substance (fresh) of Ginkgo biloba L. or Ginkgo biloba L. (Whole plant) (new)
      Comments

      Element SubstanceSourceMaterial.parentSubstanceId is not mapped to FHIR STU3, since FHIR R4 SubstanceSourceMaterial is not mapped. Element SubstanceSourceMaterial.parentSubstanceId has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      Control0..*
      TypeExtension(R4: The parent of the herbal drug Ginkgo biloba, Leaf is the substance ID of the substance (fresh) of Ginkgo biloba L. or Ginkgo biloba L. (Whole plant) (new)) (Extension Type: Identifier)
      16. Basic.extension:parentSubstanceName
      Slice NameparentSubstanceName
      Definition

      R4: SubstanceSourceMaterial.parentSubstanceName (new:string)

      ShortR4: The parent substance of the Herbal Drug, or Herbal preparation (new)
      Comments

      Element SubstanceSourceMaterial.parentSubstanceName is not mapped to FHIR STU3, since FHIR R4 SubstanceSourceMaterial is not mapped. Element SubstanceSourceMaterial.parentSubstanceName has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      Control0..*
      TypeExtension(R4: The parent substance of the Herbal Drug, or Herbal preparation (new)) (Extension Type: string)
      18. Basic.extension:countryOfOrigin
      Slice NamecountryOfOrigin
      Definition

      R4: SubstanceSourceMaterial.countryOfOrigin (new:CodeableConcept)

      ShortR4: The country where the plant material is harvested or the countries where the plasma is sourced from as laid down in accordance with the Plasma Master File. For “Plasma-derived substances” the attribute country of origin provides information about the countries used for the manufacturing of the Cryopoor plama or Crioprecipitate (new)
      Comments

      Element SubstanceSourceMaterial.countryOfOrigin is not mapped to FHIR STU3, since FHIR R4 SubstanceSourceMaterial is not mapped. Element SubstanceSourceMaterial.countryOfOrigin has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      Control0..*
      TypeExtension(R4: The country where the plant material is harvested or the countries where the plasma is sourced from as laid down in accordance with the Plasma Master File. For “Plasma-derived substances” the attribute country of origin provides information about the countries used for the manufacturing of the Cryopoor plama or Crioprecipitate (new)) (Extension Type: CodeableConcept)
      20. Basic.extension:geographicalLocation
      Slice NamegeographicalLocation
      Definition

      R4: SubstanceSourceMaterial.geographicalLocation (new:string)

      ShortR4: The place/region where the plant is harvested or the places/regions where the animal source material has its habitat (new)
      Comments

      Element SubstanceSourceMaterial.geographicalLocation is not mapped to FHIR STU3, since FHIR R4 SubstanceSourceMaterial is not mapped. Element SubstanceSourceMaterial.geographicalLocation has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      Control0..*
      TypeExtension(R4: The place/region where the plant is harvested or the places/regions where the animal source material has its habitat (new)) (Extension Type: string)
      22. Basic.extension:developmentStage
      Slice NamedevelopmentStage
      Definition

      R4: SubstanceSourceMaterial.developmentStage (new:CodeableConcept)

      ShortR4: Stage of life for animals, plants, insects and microorganisms. This information shall be provided only when the substance is significantly different in these stages (e.g. foetal bovine serum) (new)
      Comments

      Element SubstanceSourceMaterial.developmentStage is not mapped to FHIR STU3, since FHIR R4 SubstanceSourceMaterial is not mapped. Element SubstanceSourceMaterial.developmentStage has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      Control0..1
      TypeExtension(R4: Stage of life for animals, plants, insects and microorganisms. This information shall be provided only when the substance is significantly different in these stages (e.g. foetal bovine serum) (new)) (Extension Type: CodeableConcept)
      24. Basic.extension:fractionDescription
      Slice NamefractionDescription
      Definition

      R4: SubstanceSourceMaterial.fractionDescription (new:BackboneElement)

      ShortR4: Many complex materials are fractions of parts of plants, animals, or minerals. Fraction elements are often necessary to define both Substances and Specified Group 1 Substances. For substances derived from Plants, fraction information will be captured at the Substance information level ( . Oils, Juices and Exudates). Additional information for Extracts, such as extraction solvent composition, will be captured at the Specified Substance Group 1 information level. For plasma-derived products fraction information will be captured at the Substance and the Specified Substance Group 1 levels (new)
      Comments

      Element SubstanceSourceMaterial.fractionDescription is not mapped to FHIR STU3, since FHIR R4 SubstanceSourceMaterial is not mapped. Element SubstanceSourceMaterial.fractionDescription has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      Control0..*
      TypeExtension(R4: Many complex materials are fractions of parts of plants, animals, or minerals. Fraction elements are often necessary to define both Substances and Specified Group 1 Substances. For substances derived from Plants, fraction information will be captured at the Substance information level ( . Oils, Juices and Exudates). Additional information for Extracts, such as extraction solvent composition, will be captured at the Specified Substance Group 1 information level. For plasma-derived products fraction information will be captured at the Substance and the Specified Substance Group 1 levels (new)) (Complex Extension)
      26. Basic.extension:organism
      Slice Nameorganism
      Definition

      R4: SubstanceSourceMaterial.organism (new:BackboneElement)

      ShortR4: This subclause describes the organism which the substance is derived from. For vaccines, the parent organism shall be specified based on these subclause elements. As an example, full taxonomy will be described for the Substance Name: ., Leaf (new)
      Comments

      Element SubstanceSourceMaterial.organism is not mapped to FHIR STU3, since FHIR R4 SubstanceSourceMaterial is not mapped. Element SubstanceSourceMaterial.organism has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      Control0..1
      TypeExtension(R4: This subclause describes the organism which the substance is derived from. For vaccines, the parent organism shall be specified based on these subclause elements. As an example, full taxonomy will be described for the Substance Name: ., Leaf (new)) (Complex Extension)
      28. Basic.extension:partDescription
      Slice NamepartDescription
      Definition

      R4: SubstanceSourceMaterial.partDescription (new:BackboneElement)

      ShortR4: To do (new)
      Comments

      Element SubstanceSourceMaterial.partDescription is not mapped to FHIR STU3, since FHIR R4 SubstanceSourceMaterial is not mapped. Element SubstanceSourceMaterial.partDescription has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      Control0..*
      TypeExtension(R4: To do (new)) (Complex Extension)

      Guidance on how to interpret the contents of this table can be foundhere

      0. Basic
      Definition

      Basic is used for handling concepts not yet defined in FHIR, narrative-only resources that don't map to an existing resource, and custom resources not appropriate for inclusion in the FHIR specification.

      ShortResource for non-supported content
      Control0..*
      Alternate NamesZ-resource, Extension-resource, Custom-resource
      Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
      dom-1: If the resource is contained in another resource, it SHALL NOT contain any narrative (contained.text.empty())
      dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
      dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource (contained.where(('#'+id in %resource.descendants().reference).not()).empty())
      2. Basic.id
      Definition

      The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

      ShortLogical id of this artifact
      Comments

      The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

      Control0..1
      Typeid
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      4. Basic.meta
      Definition

      The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content may not always be associated with version changes to the resource.

      ShortMetadata about the resource
      Control0..1
      TypeMeta
      Summarytrue
      6. Basic.implicitRules
      Definition

      A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content.

      ShortA set of rules under which this content was created
      Comments

      Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element.

      This element is labelled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation.

      Control0..1
      Typeuri
      Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      8. Basic.language
      Definition

      The base language in which the resource is written.

      ShortLanguage of the resource content
      Comments

      Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

      Control0..1
      BindingUnless not suitable, these codes SHALL be taken from Common Languages
      (extensible to http://hl7.org/fhir/ValueSet/languages|3.0.2)

      A human language.

      Additional BindingsPurpose
      All LanguagesMax Binding
      Typecode
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      10. Basic.text
      Definition

      A human-readable narrative that contains a summary of the resource, and may be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

      ShortText summary of the resource, for human interpretation
      Comments

      Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded in formation is added later.

      Control0..1
      This element is affected by the following invariants: dom-1
      TypeNarrative
      Alternate Namesnarrative, html, xhtml, display
      12. Basic.contained
      Definition

      These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

      ShortContained, inline Resources
      Comments

      This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again.

      Control0..*
      TypeResource
      Alternate Namesinline resources, anonymous resources, contained resources
      14. Basic.extension
      Definition

      An Extension

      ShortExtension
      Control0..*
      TypeExtension
      SlicingThis element introduces a set of slices on Basic.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 16. Basic.extension:sourceMaterialClass
        Slice NamesourceMaterialClass
        Definition

        R4: SubstanceSourceMaterial.sourceMaterialClass (new:CodeableConcept)

        ShortR4: General high level classification of the source material specific to the origin of the material (new)
        Comments

        Element SubstanceSourceMaterial.sourceMaterialClass is not mapped to FHIR STU3, since FHIR R4 SubstanceSourceMaterial is not mapped. Element SubstanceSourceMaterial.sourceMaterialClass has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..1
        This element is affected by the following invariants: ele-1
        TypeExtension(R4: General high level classification of the source material specific to the origin of the material (new)) (Extension Type: CodeableConcept)
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        18. Basic.extension:sourceMaterialType
        Slice NamesourceMaterialType
        Definition

        R4: SubstanceSourceMaterial.sourceMaterialType (new:CodeableConcept)

        ShortR4: The type of the source material shall be specified based on a controlled vocabulary. For vaccines, this subclause refers to the class of infectious agent (new)
        Comments

        Element SubstanceSourceMaterial.sourceMaterialType is not mapped to FHIR STU3, since FHIR R4 SubstanceSourceMaterial is not mapped. Element SubstanceSourceMaterial.sourceMaterialType has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..1
        This element is affected by the following invariants: ele-1
        TypeExtension(R4: The type of the source material shall be specified based on a controlled vocabulary. For vaccines, this subclause refers to the class of infectious agent (new)) (Extension Type: CodeableConcept)
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        20. Basic.extension:sourceMaterialState
        Slice NamesourceMaterialState
        Definition

        R4: SubstanceSourceMaterial.sourceMaterialState (new:CodeableConcept)

        ShortR4: The state of the source material when extracted (new)
        Comments

        Element SubstanceSourceMaterial.sourceMaterialState is not mapped to FHIR STU3, since FHIR R4 SubstanceSourceMaterial is not mapped. Element SubstanceSourceMaterial.sourceMaterialState has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..1
        This element is affected by the following invariants: ele-1
        TypeExtension(R4: The state of the source material when extracted (new)) (Extension Type: CodeableConcept)
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        22. Basic.extension:organismId
        Slice NameorganismId
        Definition

        R4: SubstanceSourceMaterial.organismId (new:Identifier)

        ShortR4: The unique identifier associated with the source material parent organism shall be specified (new)
        Comments

        Element SubstanceSourceMaterial.organismId is not mapped to FHIR STU3, since FHIR R4 SubstanceSourceMaterial is not mapped. Element SubstanceSourceMaterial.organismId has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..1
        This element is affected by the following invariants: ele-1
        TypeExtension(R4: The unique identifier associated with the source material parent organism shall be specified (new)) (Extension Type: Identifier)
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        24. Basic.extension:organismName
        Slice NameorganismName
        Definition

        R4: SubstanceSourceMaterial.organismName (new:string)

        ShortR4: The organism accepted Scientific name shall be provided based on the organism taxonomy (new)
        Comments

        Element SubstanceSourceMaterial.organismName is not mapped to FHIR STU3, since FHIR R4 SubstanceSourceMaterial is not mapped. Element SubstanceSourceMaterial.organismName has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..1
        This element is affected by the following invariants: ele-1
        TypeExtension(R4: The organism accepted Scientific name shall be provided based on the organism taxonomy (new)) (Extension Type: string)
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        26. Basic.extension:parentSubstanceId
        Slice NameparentSubstanceId
        Definition

        R4: SubstanceSourceMaterial.parentSubstanceId (new:Identifier)

        ShortR4: The parent of the herbal drug Ginkgo biloba, Leaf is the substance ID of the substance (fresh) of Ginkgo biloba L. or Ginkgo biloba L. (Whole plant) (new)
        Comments

        Element SubstanceSourceMaterial.parentSubstanceId is not mapped to FHIR STU3, since FHIR R4 SubstanceSourceMaterial is not mapped. Element SubstanceSourceMaterial.parentSubstanceId has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..*
        This element is affected by the following invariants: ele-1
        TypeExtension(R4: The parent of the herbal drug Ginkgo biloba, Leaf is the substance ID of the substance (fresh) of Ginkgo biloba L. or Ginkgo biloba L. (Whole plant) (new)) (Extension Type: Identifier)
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        28. Basic.extension:parentSubstanceName
        Slice NameparentSubstanceName
        Definition

        R4: SubstanceSourceMaterial.parentSubstanceName (new:string)

        ShortR4: The parent substance of the Herbal Drug, or Herbal preparation (new)
        Comments

        Element SubstanceSourceMaterial.parentSubstanceName is not mapped to FHIR STU3, since FHIR R4 SubstanceSourceMaterial is not mapped. Element SubstanceSourceMaterial.parentSubstanceName has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..*
        This element is affected by the following invariants: ele-1
        TypeExtension(R4: The parent substance of the Herbal Drug, or Herbal preparation (new)) (Extension Type: string)
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        30. Basic.extension:countryOfOrigin
        Slice NamecountryOfOrigin
        Definition

        R4: SubstanceSourceMaterial.countryOfOrigin (new:CodeableConcept)

        ShortR4: The country where the plant material is harvested or the countries where the plasma is sourced from as laid down in accordance with the Plasma Master File. For “Plasma-derived substances” the attribute country of origin provides information about the countries used for the manufacturing of the Cryopoor plama or Crioprecipitate (new)
        Comments

        Element SubstanceSourceMaterial.countryOfOrigin is not mapped to FHIR STU3, since FHIR R4 SubstanceSourceMaterial is not mapped. Element SubstanceSourceMaterial.countryOfOrigin has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..*
        This element is affected by the following invariants: ele-1
        TypeExtension(R4: The country where the plant material is harvested or the countries where the plasma is sourced from as laid down in accordance with the Plasma Master File. For “Plasma-derived substances” the attribute country of origin provides information about the countries used for the manufacturing of the Cryopoor plama or Crioprecipitate (new)) (Extension Type: CodeableConcept)
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        32. Basic.extension:geographicalLocation
        Slice NamegeographicalLocation
        Definition

        R4: SubstanceSourceMaterial.geographicalLocation (new:string)

        ShortR4: The place/region where the plant is harvested or the places/regions where the animal source material has its habitat (new)
        Comments

        Element SubstanceSourceMaterial.geographicalLocation is not mapped to FHIR STU3, since FHIR R4 SubstanceSourceMaterial is not mapped. Element SubstanceSourceMaterial.geographicalLocation has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..*
        This element is affected by the following invariants: ele-1
        TypeExtension(R4: The place/region where the plant is harvested or the places/regions where the animal source material has its habitat (new)) (Extension Type: string)
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        34. Basic.extension:developmentStage
        Slice NamedevelopmentStage
        Definition

        R4: SubstanceSourceMaterial.developmentStage (new:CodeableConcept)

        ShortR4: Stage of life for animals, plants, insects and microorganisms. This information shall be provided only when the substance is significantly different in these stages (e.g. foetal bovine serum) (new)
        Comments

        Element SubstanceSourceMaterial.developmentStage is not mapped to FHIR STU3, since FHIR R4 SubstanceSourceMaterial is not mapped. Element SubstanceSourceMaterial.developmentStage has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..1
        This element is affected by the following invariants: ele-1
        TypeExtension(R4: Stage of life for animals, plants, insects and microorganisms. This information shall be provided only when the substance is significantly different in these stages (e.g. foetal bovine serum) (new)) (Extension Type: CodeableConcept)
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        36. Basic.extension:fractionDescription
        Slice NamefractionDescription
        Definition

        R4: SubstanceSourceMaterial.fractionDescription (new:BackboneElement)

        ShortR4: Many complex materials are fractions of parts of plants, animals, or minerals. Fraction elements are often necessary to define both Substances and Specified Group 1 Substances. For substances derived from Plants, fraction information will be captured at the Substance information level ( . Oils, Juices and Exudates). Additional information for Extracts, such as extraction solvent composition, will be captured at the Specified Substance Group 1 information level. For plasma-derived products fraction information will be captured at the Substance and the Specified Substance Group 1 levels (new)
        Comments

        Element SubstanceSourceMaterial.fractionDescription is not mapped to FHIR STU3, since FHIR R4 SubstanceSourceMaterial is not mapped. Element SubstanceSourceMaterial.fractionDescription has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..*
        This element is affected by the following invariants: ele-1
        TypeExtension(R4: Many complex materials are fractions of parts of plants, animals, or minerals. Fraction elements are often necessary to define both Substances and Specified Group 1 Substances. For substances derived from Plants, fraction information will be captured at the Substance information level ( . Oils, Juices and Exudates). Additional information for Extracts, such as extraction solvent composition, will be captured at the Specified Substance Group 1 information level. For plasma-derived products fraction information will be captured at the Substance and the Specified Substance Group 1 levels (new)) (Complex Extension)
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        38. Basic.extension:organism
        Slice Nameorganism
        Definition

        R4: SubstanceSourceMaterial.organism (new:BackboneElement)

        ShortR4: This subclause describes the organism which the substance is derived from. For vaccines, the parent organism shall be specified based on these subclause elements. As an example, full taxonomy will be described for the Substance Name: ., Leaf (new)
        Comments

        Element SubstanceSourceMaterial.organism is not mapped to FHIR STU3, since FHIR R4 SubstanceSourceMaterial is not mapped. Element SubstanceSourceMaterial.organism has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..1
        This element is affected by the following invariants: ele-1
        TypeExtension(R4: This subclause describes the organism which the substance is derived from. For vaccines, the parent organism shall be specified based on these subclause elements. As an example, full taxonomy will be described for the Substance Name: ., Leaf (new)) (Complex Extension)
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        40. Basic.extension:partDescription
        Slice NamepartDescription
        Definition

        R4: SubstanceSourceMaterial.partDescription (new:BackboneElement)

        ShortR4: To do (new)
        Comments

        Element SubstanceSourceMaterial.partDescription is not mapped to FHIR STU3, since FHIR R4 SubstanceSourceMaterial is not mapped. Element SubstanceSourceMaterial.partDescription has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..*
        This element is affected by the following invariants: ele-1
        TypeExtension(R4: To do (new)) (Complex Extension)
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        42. Basic.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the resource, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        ShortExtensions that cannot be ignored
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
        Alternate Namesextensions, user content
        44. Basic.identifier
        Definition

        Identifier assigned to the resource for business purposes, outside the context of FHIR.

        ShortBusiness identifier
        NoteThis is a business identifier, not a resource identifier (see discussion)
        Control0..*
        TypeIdentifier
        Summarytrue
        46. Basic.code
        Definition

        Identifies the 'type' of resource - equivalent to the resource name for other resources.

        ShortKind of Resource
        Comments

        Because resource references will only be able to indicate 'Basic', the type of reference will need to be specified in a Profile identified as part of the resource. Refer to the resource notes section for information on appropriate terminologies for this code.

        This element is labeled as a modifier because the it defines the meaning of the resource and cannot be ignored.

        Control1..1
        BindingFor example codes, see Basic Resource Types
        (example to http://hl7.org/fhir/ValueSet/basic-resource-type|3.0.2)

        Codes for identifying types of resources not yet defined by FHIR

        TypeCodeableConcept
        Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
        Summarytrue
        Requirements

        Must be able to distinguish different types of Basic resources.

        48. Basic.subject
        Definition

        Identifies the patient, practitioner, device or any other resource that is the "focus" of this resource.

        ShortIdentifies the focus of this resource
        Comments

        Optional as not all potential resources will have subjects. Resources associated with multiple subjects can handle this via extension.

        Control0..1
        TypeReference(Resource)
        Summarytrue
        Requirements

        Needed for partitioning the resource by Patient.

        50. Basic.created
        Definition

        Identifies when the resource was first created.

        ShortWhen created
        Control0..1
        Typedate
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        Allows ordering resource instances by time.

        52. Basic.author
        Definition

        Indicates who was responsible for creating the resource instance.

        ShortWho created
        Control0..1
        TypeReference(Practitioner, Patient, RelatedPerson)
        Summarytrue
        Requirements

        Needed for partitioning the resource.