Profile_R4_ResearchElementDefinition_R3 - Definitions - Extensions for Using Data Elements from FHIR R4 in FHIR STU3 v0.1.0

Extensions for Using Data Elements from FHIR R4 in FHIR STU3 - Downloaded Version null See the Directory of published versions

Resource Profile: Profile_R4_ResearchElementDefinition_R3 - Detailed Descriptions

Page standards status: Trial-use

Maturity Level: 0

Definitions for the profile-ResearchElementDefinition resource profile.

Key Elements Table
Differential Elements Table
Snapshot Elements Table

Guidance on how to interpret the contents of this table can be foundhere

0. Basic
Definition	Basic is used for handling concepts not yet defined in FHIR, narrative-only resources that don't map to an existing resource, and custom resources not appropriate for inclusion in the FHIR specification.
Short	Resource for non-supported content
Control	0..*
Alternate Names	Z-resource, Extension-resource, Custom-resource
Invariants	dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (`contained.contained.empty()`) dom-1: If the resource is contained in another resource, it SHALL NOT contain any narrative (`contained.text.empty()`) dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (`contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()`) dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource (`contained.where(('#'+id in %resource.descendants().reference).not()).empty()`) dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty()) dom-1: If the resource is contained in another resource, it SHALL NOT contain any narrative (contained.text.empty()) dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()) dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource (contained.where(('#'+id in %resource.descendants().reference).not()).empty())
2. Basic.implicitRules
Definition	A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content.
Short	A set of rules under which this content was created
Comments	Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. This element is labelled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation.
Control	0..1
Type	uri
Is Modifier	true because No Modifier Reason provideed in previous versions of FHIR
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	true
4. Basic.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the resource. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	20..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Basic.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
6. Basic.extension:url
Slice Name	url
Definition	R4: `ResearchElementDefinition.url` (new:uri)
Short	R4: Canonical identifier for this research element definition, represented as a URI (globally unique) (new)
Comments	Element `ResearchElementDefinition.url` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.url` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Can be a urn:uuid: or a urn:oid: but real http: addresses are preferred. Multiple instances may share the same URL if they have a distinct version. The determination of when to create a new version of a resource (same url, new version) vs. defining a new artifact is up to the author. Considerations for making this decision are found in Technical and Business Versions. In some cases, the resource can no longer be found at the stated url, but the url itself cannot change. Implementations can use the meta.source element to indicate where the current master source of the resource can be found.
Control	0..1 This element is affected by the following invariants: ele-1
Type	Extension(R4: Canonical identifier for this research element definition, represented as a URI (globally unique) (new)) (Extension Type: uri)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
8. Basic.extension:version
Slice Name	version
Definition	R4: `ResearchElementDefinition.version` (new:string)
Short	R4: Business version of the research element definition (new)
Comments	Element `ResearchElementDefinition.version` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.version` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). There may be different research element definition instances that have the same identifier but different versions. The version can be appended to the url in a reference to allow a reference to a particular business version of the research element definition with the format [url]\|[version].
Control	0..1 This element is affected by the following invariants: ele-1
Type	Extension(R4: Business version of the research element definition (new)) (Extension Type: string)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
10. Basic.extension:name
Slice Name	name
Definition	R4: `ResearchElementDefinition.name` (new:string)
Short	R4: Name for this research element definition (computer friendly) (new)
Comments	Element `ResearchElementDefinition.name` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.name` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). The name is not expected to be globally unique. The name should be a simple alphanumeric type name to ensure that it is machine-processing friendly.
Control	0..1 This element is affected by the following invariants: ele-1
Type	Extension(R4: Name for this research element definition (computer friendly) (new)) (Extension Type: string)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
12. Basic.extension:title
Slice Name	title
Definition	R4: `ResearchElementDefinition.title` (new:string)
Short	R4: Name for this research element definition (human friendly) (new)
Comments	Element `ResearchElementDefinition.title` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.title` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). This name does not need to be machine-processing friendly and may contain punctuation, white-space, etc.
Control	0..1 This element is affected by the following invariants: ele-1
Type	Extension(R4: Name for this research element definition (human friendly) (new)) (Extension Type: string)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
14. Basic.extension:shortTitle
Slice Name	shortTitle
Definition	R4: `ResearchElementDefinition.shortTitle` (new:string)
Short	R4: Title for use in informal contexts (new)
Comments	Element `ResearchElementDefinition.shortTitle` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.shortTitle` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1 This element is affected by the following invariants: ele-1
Type	Extension(R4: Title for use in informal contexts (new)) (Extension Type: string)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
16. Basic.extension:subtitle
Slice Name	subtitle
Definition	R4: `ResearchElementDefinition.subtitle` (new:string)
Short	R4: Subordinate title of the ResearchElementDefinition (new)
Comments	Element `ResearchElementDefinition.subtitle` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.subtitle` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1 This element is affected by the following invariants: ele-1
Type	Extension(R4: Subordinate title of the ResearchElementDefinition (new)) (Extension Type: string)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
18. Basic.extension:experimental
Slice Name	experimental
Definition	R4: `ResearchElementDefinition.experimental` (new:boolean)
Short	R4: For testing purposes, not real usage (new)
Comments	Element `ResearchElementDefinition.experimental` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.experimental` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Allows filtering of research element definitions that are appropriate for use versus not.
Control	0..1 This element is affected by the following invariants: ele-1
Type	Extension(R4: For testing purposes, not real usage (new)) (Extension Type: boolean)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
20. Basic.extension:subject
Slice Name	subject
Definition	R4: `ResearchElementDefinition.subject[x]` (new:CodeableConcept, Reference(Group))
Short	R4: E.g. Patient, Practitioner, RelatedPerson, Organization, Location, Device (new)
Comments	Element `ResearchElementDefinition.subject[x]` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.subject[x]` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). The subject of the ResearchElementDefinition is critical in interpreting the criteria definitions, as the logic in the ResearchElementDefinitions is evaluated with respect to a particular subject. This corresponds roughly to the notion of a Compartment in that it limits what content is available based on its relationship to the subject. In CQL, this corresponds to the context declaration.
Control	0..1 This element is affected by the following invariants: ele-1
Type	Extension(R4: E.g. Patient, Practitioner, RelatedPerson, Organization, Location, Device (new)) (Extension Type: Choice of: CodeableConcept, Reference(Cross-version Profile for R4.Group for use in FHIR STU3, Group))
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
22. Basic.extension:date
Slice Name	date
Definition	R4: `ResearchElementDefinition.date` (new:dateTime)
Short	R4: Date last changed (new)
Comments	Element `ResearchElementDefinition.date` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.date` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Note that this is not the same as the resource last-modified-date, since the resource may be a secondary representation of the research element definition. Additional specific dates may be added as extensions or be found by consulting Provenances associated with past versions of the resource.
Control	0..1 This element is affected by the following invariants: ele-1
Type	Extension(R4: Date last changed (new)) (Extension Type: dateTime)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
24. Basic.extension:publisher
Slice Name	publisher
Definition	R4: `ResearchElementDefinition.publisher` (new:string)
Short	R4: Name of the publisher (organization or individual) (new)
Comments	Element `ResearchElementDefinition.publisher` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.publisher` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Usually an organization but may be an individual. The publisher (or steward) of the research element definition is the organization or individual primarily responsible for the maintenance and upkeep of the research element definition. This is not necessarily the same individual or organization that developed and initially authored the content. The publisher is the primary point of contact for questions or issues with the research element definition. This item SHOULD be populated unless the information is available from context.
Control	0..1 This element is affected by the following invariants: ele-1
Type	Extension(R4: Name of the publisher (organization or individual) (new)) (Extension Type: string)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
26. Basic.extension:contact
Slice Name	contact
Definition	R4: `ResearchElementDefinition.contact` (new:ContactDetail)
Short	R4: Contact details for the publisher (new)
Comments	Element `ResearchElementDefinition.contact` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.contact` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). May be a web site, an email address, a telephone number, etc.
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(R4: Contact details for the publisher (new)) (Complex Extension)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
28. Basic.extension:description
Slice Name	description
Definition	R4: `ResearchElementDefinition.description` (new:markdown)
Short	R4: Natural language description of the research element definition (new)
Comments	Element `ResearchElementDefinition.description` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.description` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). This description can be used to capture details such as why the research element definition was built, comments about misuse, instructions for clinical use and interpretation, literature references, examples from the paper world, etc. It is not a rendering of the research element definition as conveyed in the 'text' field of the resource itself. This item SHOULD be populated unless the information is available from context (e.g. the language of the research element definition is presumed to be the predominant language in the place the research element definition was created).
Control	0..1 This element is affected by the following invariants: ele-1
Type	Extension(R4: Natural language description of the research element definition (new)) (Extension Type: markdown)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
30. Basic.extension:comment
Slice Name	comment
Definition	R4: `ResearchElementDefinition.comment` (new:string)
Short	R4: Used for footnotes or explanatory notes (new)
Comments	Element `ResearchElementDefinition.comment` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.comment` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(R4: Used for footnotes or explanatory notes (new)) (Extension Type: string)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
32. Basic.extension:useContext
Slice Name	useContext
Definition	R4: `ResearchElementDefinition.useContext` (new:UsageContext)
Short	R4: The context that the content is intended to support (new)
Comments	Element `ResearchElementDefinition.useContext` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.useContext` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). When multiple useContexts are specified, there is no expectation that all or any of the contexts apply.
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(R4: The context that the content is intended to support (new)) (Complex Extension)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
34. Basic.extension:jurisdiction
Slice Name	jurisdiction
Definition	R4: `ResearchElementDefinition.jurisdiction` (new:CodeableConcept)
Short	R4: Intended jurisdiction for research element definition (if applicable) (new)
Comments	Element `ResearchElementDefinition.jurisdiction` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.jurisdiction` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). It may be possible for the research element definition to be used in jurisdictions other than those for which it was originally designed or intended.
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(R4: Intended jurisdiction for research element definition (if applicable) (new)) (Extension Type: CodeableConcept)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
36. Basic.extension:purpose
Slice Name	purpose
Definition	R4: `ResearchElementDefinition.purpose` (new:markdown)
Short	R4: Why this research element definition is defined (new)
Comments	Element `ResearchElementDefinition.purpose` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.purpose` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). This element does not describe the usage of the research element definition. Instead, it provides traceability of ''why'' the resource is either needed or ''why'' it is defined as it is. This may be used to point to source materials or specifications that drove the structure of this research element definition.
Control	0..1 This element is affected by the following invariants: ele-1
Type	Extension(R4: Why this research element definition is defined (new)) (Extension Type: markdown)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
38. Basic.extension:usage
Slice Name	usage
Definition	R4: `ResearchElementDefinition.usage` (new:string)
Short	R4: Describes the clinical usage of the ResearchElementDefinition (new)
Comments	Element `ResearchElementDefinition.usage` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.usage` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1 This element is affected by the following invariants: ele-1
Type	Extension(R4: Describes the clinical usage of the ResearchElementDefinition (new)) (Extension Type: string)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
40. Basic.extension:copyright
Slice Name	copyright
Definition	R4: `ResearchElementDefinition.copyright` (new:markdown)
Short	R4: Use and/or publishing restrictions (new)
Comments	Element `ResearchElementDefinition.copyright` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.copyright` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1 This element is affected by the following invariants: ele-1
Type	Extension(R4: Use and/or publishing restrictions (new)) (Extension Type: markdown)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
42. Basic.extension:approvalDate
Slice Name	approvalDate
Definition	R4: `ResearchElementDefinition.approvalDate` (new:date)
Short	R4: When the research element definition was approved by publisher (new)
Comments	Element `ResearchElementDefinition.approvalDate` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.approvalDate` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). The 'date' element may be more recent than the approval date because of minor changes or editorial corrections.
Control	0..1 This element is affected by the following invariants: ele-1
Type	Extension(R4: When the research element definition was approved by publisher (new)) (Extension Type: date)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
44. Basic.extension:lastReviewDate
Slice Name	lastReviewDate
Definition	R4: `ResearchElementDefinition.lastReviewDate` (new:date)
Short	R4: When the research element definition was last reviewed (new)
Comments	Element `ResearchElementDefinition.lastReviewDate` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.lastReviewDate` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). If specified, this date follows the original approval date.
Control	0..1 This element is affected by the following invariants: ele-1
Type	Extension(R4: When the research element definition was last reviewed (new)) (Extension Type: date)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
46. Basic.extension:effectivePeriod
Slice Name	effectivePeriod
Definition	R4: `ResearchElementDefinition.effectivePeriod` (new:Period)
Short	R4: When the research element definition is expected to be used (new)
Comments	Element `ResearchElementDefinition.effectivePeriod` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.effectivePeriod` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). The effective period for a research element definition determines when the content is applicable for usage and is independent of publication and review dates. For example, a measure intended to be used for the year 2016 might be published in 2015.
Control	0..1 This element is affected by the following invariants: ele-1
Type	Extension(R4: When the research element definition is expected to be used (new)) (Extension Type: Period)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
48. Basic.extension:topic
Slice Name	topic
Definition	R4: `ResearchElementDefinition.topic` (new:CodeableConcept)
Short	R4: The category of the ResearchElementDefinition, such as Education, Treatment, Assessment, etc. (new)
Comments	Element `ResearchElementDefinition.topic` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.topic` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(R4: The category of the ResearchElementDefinition, such as Education, Treatment, Assessment, etc. (new)) (Extension Type: CodeableConcept)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
50. Basic.extension:author
Slice Name	author
Definition	R4: `ResearchElementDefinition.author` (new:ContactDetail)
Short	R4: Who authored the content (new)
Comments	Element `ResearchElementDefinition.author` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.author` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). While the source element matches Basic element path `(`), the definitions are not compatible (source: `ContactDetail`:0..* -> basic: `Reference(http://hl7.org/fhir/StructureDefinition/Practitioner,http://hl7.org/fhir/StructureDefinition/Patient,http://hl7.org/fhir/StructureDefinition/RelatedPerson)`:0..1).
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(R4: Who authored the content (new)) (Complex Extension)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
52. Basic.extension:editor
Slice Name	editor
Definition	R4: `ResearchElementDefinition.editor` (new:ContactDetail)
Short	R4: Who edited the content (new)
Comments	Element `ResearchElementDefinition.editor` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.editor` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(R4: Who edited the content (new)) (Complex Extension)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
54. Basic.extension:reviewer
Slice Name	reviewer
Definition	R4: `ResearchElementDefinition.reviewer` (new:ContactDetail)
Short	R4: Who reviewed the content (new)
Comments	Element `ResearchElementDefinition.reviewer` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.reviewer` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(R4: Who reviewed the content (new)) (Complex Extension)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
56. Basic.extension:endorser
Slice Name	endorser
Definition	R4: `ResearchElementDefinition.endorser` (new:ContactDetail)
Short	R4: Who endorsed the content (new)
Comments	Element `ResearchElementDefinition.endorser` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.endorser` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(R4: Who endorsed the content (new)) (Complex Extension)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
58. Basic.extension:relatedArtifact
Slice Name	relatedArtifact
Definition	R4: `ResearchElementDefinition.relatedArtifact` (new:RelatedArtifact)
Short	R4: Additional documentation, citations, etc. (new)
Comments	Element `ResearchElementDefinition.relatedArtifact` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.relatedArtifact` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Each related artifact is either an attachment, or a reference to another resource, but not both.
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(R4: Additional documentation, citations, etc. (new)) (Complex Extension)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
60. Basic.extension:library
Slice Name	library
Definition	R4: `ResearchElementDefinition.library` (new:canonical(Library))
Short	R4: Logic used by the ResearchElementDefinition (new)
Comments	Element `ResearchElementDefinition.library` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.library` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(R4: Logic used by the ResearchElementDefinition (new)) (Extension Type: uri(Cross-version Profile for R4.Library for use in FHIR STU3, Library))
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
62. Basic.extension:type
Slice Name	type
Definition	R4: `ResearchElementDefinition.type` (new:code)
Short	R4: population \| exposure \| outcome (new)
Comments	Element `ResearchElementDefinition.type` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.type` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	1..1 This element is affected by the following invariants: ele-1
Type	Extension(R4: population \| exposure \| outcome (new)) (Extension Type: code)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
64. Basic.extension:variableType
Slice Name	variableType
Definition	R4: `ResearchElementDefinition.variableType` (new:code)
Short	R4: dichotomous \| continuous \| descriptive (new)
Comments	Element `ResearchElementDefinition.variableType` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.variableType` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1 This element is affected by the following invariants: ele-1
Type	Extension(R4: dichotomous \| continuous \| descriptive (new)) (Extension Type: code)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
66. Basic.extension:characteristic
Slice Name	characteristic
Definition	R4: `ResearchElementDefinition.characteristic` (new:BackboneElement)
Short	R4: What defines the members of the research element (new)
Comments	Element `ResearchElementDefinition.characteristic` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.characteristic` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Characteristics can be defined flexibly to accommodate different use cases for membership criteria, ranging from simple codes, all the way to using an expression language to express the criteria.
Control	1..* This element is affected by the following invariants: ele-1
Type	Extension(R4: What defines the members of the research element (new)) (Complex Extension)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
68. Basic.modifierExtension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the resource, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.
Short	ExtensionExtensions that cannot be ignored
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	true because No Modifier Reason provideed in previous versions of FHIR
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Basic.modifierExtension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
70. Basic.modifierExtension:status
Slice Name	status
Definition	R4: `ResearchElementDefinition.status` (new:code)
Short	R4: draft \| active \| retired \| unknown (new)
Comments	Element `ResearchElementDefinition.status` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.status` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Allows filtering of research element definitions that are appropriate for use versus not.
Control	1..1 This element is affected by the following invariants: ele-1
Type	Extension(R4: draft \| active \| retired \| unknown (new)) (Extension Type: code)
Is Modifier	true because No Modifier Reason provideed in previous versions of FHIR
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
72. Basic.code
Definition	Identifies the 'type' of resource - equivalent to the resource name for other resources.
Short	Kind of Resource
Comments	Because resource references will only be able to indicate 'Basic', the type of reference will need to be specified in a Profile identified as part of the resource. Refer to the resource notes section for information on appropriate terminologies for this code. This element is labeled as a modifier because the it defines the meaning of the resource and cannot be ignored.
Control	1..1
Binding	For example codes, see Basic Resource Typeshttp://hl7.org/fhir/ValueSet/basic-resource-type\|3.0.2 (example to `http://hl7.org/fhir/ValueSet/basic-resource-type\|3.0.2`) Codes for identifying types of resources not yet defined by FHIR
Type	CodeableConcept
Is Modifier	true because No Modifier Reason provideed in previous versions of FHIR
Summary	true
Requirements	Must be able to distinguish different types of Basic resources.

Guidance on how to interpret the contents of this table can be foundhere

0. Basic
2. Basic.extension
Control	2..*
Slicing	This element introduces a set of slices on `Basic.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
4. Basic.extension:url
Slice Name	url
Definition	R4: `ResearchElementDefinition.url` (new:uri)
Short	R4: Canonical identifier for this research element definition, represented as a URI (globally unique) (new)
Comments	Element `ResearchElementDefinition.url` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.url` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Can be a urn:uuid: or a urn:oid: but real http: addresses are preferred. Multiple instances may share the same URL if they have a distinct version. The determination of when to create a new version of a resource (same url, new version) vs. defining a new artifact is up to the author. Considerations for making this decision are found in Technical and Business Versions. In some cases, the resource can no longer be found at the stated url, but the url itself cannot change. Implementations can use the meta.source element to indicate where the current master source of the resource can be found.
Control	0..1
Type	Extension(R4: Canonical identifier for this research element definition, represented as a URI (globally unique) (new)) (Extension Type: uri)
6. Basic.extension:version
Slice Name	version
Definition	R4: `ResearchElementDefinition.version` (new:string)
Short	R4: Business version of the research element definition (new)
Comments	Element `ResearchElementDefinition.version` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.version` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). There may be different research element definition instances that have the same identifier but different versions. The version can be appended to the url in a reference to allow a reference to a particular business version of the research element definition with the format [url]\|[version].
Control	0..1
Type	Extension(R4: Business version of the research element definition (new)) (Extension Type: string)
8. Basic.extension:name
Slice Name	name
Definition	R4: `ResearchElementDefinition.name` (new:string)
Short	R4: Name for this research element definition (computer friendly) (new)
Comments	Element `ResearchElementDefinition.name` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.name` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). The name is not expected to be globally unique. The name should be a simple alphanumeric type name to ensure that it is machine-processing friendly.
Control	0..1
Type	Extension(R4: Name for this research element definition (computer friendly) (new)) (Extension Type: string)
10. Basic.extension:title
Slice Name	title
Definition	R4: `ResearchElementDefinition.title` (new:string)
Short	R4: Name for this research element definition (human friendly) (new)
Comments	Element `ResearchElementDefinition.title` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.title` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). This name does not need to be machine-processing friendly and may contain punctuation, white-space, etc.
Control	0..1
Type	Extension(R4: Name for this research element definition (human friendly) (new)) (Extension Type: string)
12. Basic.extension:shortTitle
Slice Name	shortTitle
Definition	R4: `ResearchElementDefinition.shortTitle` (new:string)
Short	R4: Title for use in informal contexts (new)
Comments	Element `ResearchElementDefinition.shortTitle` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.shortTitle` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension(R4: Title for use in informal contexts (new)) (Extension Type: string)
14. Basic.extension:subtitle
Slice Name	subtitle
Definition	R4: `ResearchElementDefinition.subtitle` (new:string)
Short	R4: Subordinate title of the ResearchElementDefinition (new)
Comments	Element `ResearchElementDefinition.subtitle` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.subtitle` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension(R4: Subordinate title of the ResearchElementDefinition (new)) (Extension Type: string)
16. Basic.extension:experimental
Slice Name	experimental
Definition	R4: `ResearchElementDefinition.experimental` (new:boolean)
Short	R4: For testing purposes, not real usage (new)
Comments	Element `ResearchElementDefinition.experimental` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.experimental` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Allows filtering of research element definitions that are appropriate for use versus not.
Control	0..1
Type	Extension(R4: For testing purposes, not real usage (new)) (Extension Type: boolean)
18. Basic.extension:subject
Slice Name	subject
Definition	R4: `ResearchElementDefinition.subject[x]` (new:CodeableConcept, Reference(Group))
Short	R4: E.g. Patient, Practitioner, RelatedPerson, Organization, Location, Device (new)
Comments	Element `ResearchElementDefinition.subject[x]` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.subject[x]` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). The subject of the ResearchElementDefinition is critical in interpreting the criteria definitions, as the logic in the ResearchElementDefinitions is evaluated with respect to a particular subject. This corresponds roughly to the notion of a Compartment in that it limits what content is available based on its relationship to the subject. In CQL, this corresponds to the context declaration.
Control	0..1
Type	Extension(R4: E.g. Patient, Practitioner, RelatedPerson, Organization, Location, Device (new)) (Extension Type: Choice of: CodeableConcept, Reference(Cross-version Profile for R4.Group for use in FHIR STU3, Group))
20. Basic.extension:date
Slice Name	date
Definition	R4: `ResearchElementDefinition.date` (new:dateTime)
Short	R4: Date last changed (new)
Comments	Element `ResearchElementDefinition.date` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.date` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Note that this is not the same as the resource last-modified-date, since the resource may be a secondary representation of the research element definition. Additional specific dates may be added as extensions or be found by consulting Provenances associated with past versions of the resource.
Control	0..1
Type	Extension(R4: Date last changed (new)) (Extension Type: dateTime)
22. Basic.extension:publisher
Slice Name	publisher
Definition	R4: `ResearchElementDefinition.publisher` (new:string)
Short	R4: Name of the publisher (organization or individual) (new)
Comments	Element `ResearchElementDefinition.publisher` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.publisher` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Usually an organization but may be an individual. The publisher (or steward) of the research element definition is the organization or individual primarily responsible for the maintenance and upkeep of the research element definition. This is not necessarily the same individual or organization that developed and initially authored the content. The publisher is the primary point of contact for questions or issues with the research element definition. This item SHOULD be populated unless the information is available from context.
Control	0..1
Type	Extension(R4: Name of the publisher (organization or individual) (new)) (Extension Type: string)
24. Basic.extension:contact
Slice Name	contact
Definition	R4: `ResearchElementDefinition.contact` (new:ContactDetail)
Short	R4: Contact details for the publisher (new)
Comments	Element `ResearchElementDefinition.contact` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.contact` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). May be a web site, an email address, a telephone number, etc.
Control	0..*
Type	Extension(R4: Contact details for the publisher (new)) (Complex Extension)
26. Basic.extension:description
Slice Name	description
Definition	R4: `ResearchElementDefinition.description` (new:markdown)
Short	R4: Natural language description of the research element definition (new)
Comments	Element `ResearchElementDefinition.description` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.description` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). This description can be used to capture details such as why the research element definition was built, comments about misuse, instructions for clinical use and interpretation, literature references, examples from the paper world, etc. It is not a rendering of the research element definition as conveyed in the 'text' field of the resource itself. This item SHOULD be populated unless the information is available from context (e.g. the language of the research element definition is presumed to be the predominant language in the place the research element definition was created).
Control	0..1
Type	Extension(R4: Natural language description of the research element definition (new)) (Extension Type: markdown)
28. Basic.extension:comment
Slice Name	comment
Definition	R4: `ResearchElementDefinition.comment` (new:string)
Short	R4: Used for footnotes or explanatory notes (new)
Comments	Element `ResearchElementDefinition.comment` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.comment` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension(R4: Used for footnotes or explanatory notes (new)) (Extension Type: string)
30. Basic.extension:useContext
Slice Name	useContext
Definition	R4: `ResearchElementDefinition.useContext` (new:UsageContext)
Short	R4: The context that the content is intended to support (new)
Comments	Element `ResearchElementDefinition.useContext` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.useContext` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). When multiple useContexts are specified, there is no expectation that all or any of the contexts apply.
Control	0..*
Type	Extension(R4: The context that the content is intended to support (new)) (Complex Extension)
32. Basic.extension:jurisdiction
Slice Name	jurisdiction
Definition	R4: `ResearchElementDefinition.jurisdiction` (new:CodeableConcept)
Short	R4: Intended jurisdiction for research element definition (if applicable) (new)
Comments	Element `ResearchElementDefinition.jurisdiction` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.jurisdiction` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). It may be possible for the research element definition to be used in jurisdictions other than those for which it was originally designed or intended.
Control	0..*
Type	Extension(R4: Intended jurisdiction for research element definition (if applicable) (new)) (Extension Type: CodeableConcept)
34. Basic.extension:purpose
Slice Name	purpose
Definition	R4: `ResearchElementDefinition.purpose` (new:markdown)
Short	R4: Why this research element definition is defined (new)
Comments	Element `ResearchElementDefinition.purpose` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.purpose` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). This element does not describe the usage of the research element definition. Instead, it provides traceability of ''why'' the resource is either needed or ''why'' it is defined as it is. This may be used to point to source materials or specifications that drove the structure of this research element definition.
Control	0..1
Type	Extension(R4: Why this research element definition is defined (new)) (Extension Type: markdown)
36. Basic.extension:usage
Slice Name	usage
Definition	R4: `ResearchElementDefinition.usage` (new:string)
Short	R4: Describes the clinical usage of the ResearchElementDefinition (new)
Comments	Element `ResearchElementDefinition.usage` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.usage` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension(R4: Describes the clinical usage of the ResearchElementDefinition (new)) (Extension Type: string)
38. Basic.extension:copyright
Slice Name	copyright
Definition	R4: `ResearchElementDefinition.copyright` (new:markdown)
Short	R4: Use and/or publishing restrictions (new)
Comments	Element `ResearchElementDefinition.copyright` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.copyright` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension(R4: Use and/or publishing restrictions (new)) (Extension Type: markdown)
40. Basic.extension:approvalDate
Slice Name	approvalDate
Definition	R4: `ResearchElementDefinition.approvalDate` (new:date)
Short	R4: When the research element definition was approved by publisher (new)
Comments	Element `ResearchElementDefinition.approvalDate` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.approvalDate` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). The 'date' element may be more recent than the approval date because of minor changes or editorial corrections.
Control	0..1
Type	Extension(R4: When the research element definition was approved by publisher (new)) (Extension Type: date)
42. Basic.extension:lastReviewDate
Slice Name	lastReviewDate
Definition	R4: `ResearchElementDefinition.lastReviewDate` (new:date)
Short	R4: When the research element definition was last reviewed (new)
Comments	Element `ResearchElementDefinition.lastReviewDate` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.lastReviewDate` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). If specified, this date follows the original approval date.
Control	0..1
Type	Extension(R4: When the research element definition was last reviewed (new)) (Extension Type: date)
44. Basic.extension:effectivePeriod
Slice Name	effectivePeriod
Definition	R4: `ResearchElementDefinition.effectivePeriod` (new:Period)
Short	R4: When the research element definition is expected to be used (new)
Comments	Element `ResearchElementDefinition.effectivePeriod` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.effectivePeriod` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). The effective period for a research element definition determines when the content is applicable for usage and is independent of publication and review dates. For example, a measure intended to be used for the year 2016 might be published in 2015.
Control	0..1
Type	Extension(R4: When the research element definition is expected to be used (new)) (Extension Type: Period)
46. Basic.extension:topic
Slice Name	topic
Definition	R4: `ResearchElementDefinition.topic` (new:CodeableConcept)
Short	R4: The category of the ResearchElementDefinition, such as Education, Treatment, Assessment, etc. (new)
Comments	Element `ResearchElementDefinition.topic` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.topic` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension(R4: The category of the ResearchElementDefinition, such as Education, Treatment, Assessment, etc. (new)) (Extension Type: CodeableConcept)
48. Basic.extension:author
Slice Name	author
Definition	R4: `ResearchElementDefinition.author` (new:ContactDetail)
Short	R4: Who authored the content (new)
Comments	Element `ResearchElementDefinition.author` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.author` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). While the source element matches Basic element path `(`), the definitions are not compatible (source: `ContactDetail`:0..* -> basic: `Reference(http://hl7.org/fhir/StructureDefinition/Practitioner,http://hl7.org/fhir/StructureDefinition/Patient,http://hl7.org/fhir/StructureDefinition/RelatedPerson)`:0..1).
Control	0..*
Type	Extension(R4: Who authored the content (new)) (Complex Extension)
50. Basic.extension:editor
Slice Name	editor
Definition	R4: `ResearchElementDefinition.editor` (new:ContactDetail)
Short	R4: Who edited the content (new)
Comments	Element `ResearchElementDefinition.editor` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.editor` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension(R4: Who edited the content (new)) (Complex Extension)
52. Basic.extension:reviewer
Slice Name	reviewer
Definition	R4: `ResearchElementDefinition.reviewer` (new:ContactDetail)
Short	R4: Who reviewed the content (new)
Comments	Element `ResearchElementDefinition.reviewer` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.reviewer` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension(R4: Who reviewed the content (new)) (Complex Extension)
54. Basic.extension:endorser
Slice Name	endorser
Definition	R4: `ResearchElementDefinition.endorser` (new:ContactDetail)
Short	R4: Who endorsed the content (new)
Comments	Element `ResearchElementDefinition.endorser` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.endorser` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension(R4: Who endorsed the content (new)) (Complex Extension)
56. Basic.extension:relatedArtifact
Slice Name	relatedArtifact
Definition	R4: `ResearchElementDefinition.relatedArtifact` (new:RelatedArtifact)
Short	R4: Additional documentation, citations, etc. (new)
Comments	Element `ResearchElementDefinition.relatedArtifact` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.relatedArtifact` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Each related artifact is either an attachment, or a reference to another resource, but not both.
Control	0..*
Type	Extension(R4: Additional documentation, citations, etc. (new)) (Complex Extension)
58. Basic.extension:library
Slice Name	library
Definition	R4: `ResearchElementDefinition.library` (new:canonical(Library))
Short	R4: Logic used by the ResearchElementDefinition (new)
Comments	Element `ResearchElementDefinition.library` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.library` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension(R4: Logic used by the ResearchElementDefinition (new)) (Extension Type: uri(Cross-version Profile for R4.Library for use in FHIR STU3, Library))
60. Basic.extension:type
Slice Name	type
Definition	R4: `ResearchElementDefinition.type` (new:code)
Short	R4: population \| exposure \| outcome (new)
Comments	Element `ResearchElementDefinition.type` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.type` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	1..1
Type	Extension(R4: population \| exposure \| outcome (new)) (Extension Type: code)
62. Basic.extension:variableType
Slice Name	variableType
Definition	R4: `ResearchElementDefinition.variableType` (new:code)
Short	R4: dichotomous \| continuous \| descriptive (new)
Comments	Element `ResearchElementDefinition.variableType` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.variableType` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension(R4: dichotomous \| continuous \| descriptive (new)) (Extension Type: code)
64. Basic.extension:characteristic
Slice Name	characteristic
Definition	R4: `ResearchElementDefinition.characteristic` (new:BackboneElement)
Short	R4: What defines the members of the research element (new)
Comments	Element `ResearchElementDefinition.characteristic` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.characteristic` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Characteristics can be defined flexibly to accommodate different use cases for membership criteria, ranging from simple codes, all the way to using an expression language to express the criteria.
Control	1..*
Type	Extension(R4: What defines the members of the research element (new)) (Complex Extension)
66. Basic.modifierExtension
Control	0..*
Slicing	This element introduces a set of slices on `Basic.modifierExtension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
68. Basic.modifierExtension:status
Slice Name	status
Definition	R4: `ResearchElementDefinition.status` (new:code)
Short	R4: draft \| active \| retired \| unknown (new)
Comments	Element `ResearchElementDefinition.status` is not mapped to FHIR STU3, since FHIR R4 `ResearchElementDefinition` is not mapped. Element `ResearchElementDefinition.status` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Allows filtering of research element definitions that are appropriate for use versus not.
Control	1..1
Type	Extension(R4: draft \| active \| retired \| unknown (new)) (Extension Type: code)

Guidance on how to interpret the contents of this table can be foundhere

0. Basic

Definition

Basic is used for handling concepts not yet defined in FHIR, narrative-only resources that don't map to an existing resource, and custom resources not appropriate for inclusion in the FHIR specification.

Short Resource for non-supported content

Control 0..*

Alternate Names Z-resource, Extension-resource, Custom-resource

Invariants dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-1: If the resource is contained in another resource, it SHALL NOT contain any narrative (contained.text.empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource (contained.where(('#'+id in %resource.descendants().reference).not()).empty())

2. Basic.id

Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

Short Logical id of this artifact

Comments

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

Control 0..1

Type

Primitive Value This primitive element may be present, or absent, or replaced by an extension

Summary true

4. Basic.meta

Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content may not always be associated with version changes to the resource.

Short Metadata about the resource

Control 0..1

Type

Meta

Summary true

6. Basic.implicitRules

Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content.

Short A set of rules under which this content was created

Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element.

This element is labelled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation.

Control 0..1

Type

uri

Is Modifier true because No Modifier Reason provideed in previous versions of FHIR

Primitive Value This primitive element may be present, or absent, or replaced by an extension

Summary true

8. Basic.language

Definition

The base language in which the resource is written.

Short Language of the resource content

Comments

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

Control 0..1

Binding

Unless not suitable, these codes SHALL be taken from Common Languages
(extensible to http://hl7.org/fhir/ValueSet/languages|3.0.2)

A human language.

Additional Bindings

Purpose

Primitive Value This primitive element may be present, or absent, or replaced by an extension

10. Basic.text

Definition

A human-readable narrative that contains a summary of the resource, and may be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

Short Text summary of the resource, for human interpretation

Comments

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded in formation is added later.

Control 0..1
This element is affected by the following invariants: dom-1

Type

Narrative

Alternate Names narrative, html, xhtml, display

12. Basic.contained

Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

Short Contained, inline Resources

Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again.

Control 0..*

Type

Resource

Alternate Names inline resources, anonymous resources, contained resources

14. Basic.extension

Definition

An Extension

Short Extension

Control 2..*

Type

Extension

Slicing

This element introduces a set of slices on Basic.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:

value @ url

16. Basic.extension:url

Slice Name url

Definition

R4: ResearchElementDefinition.url (new:uri)

Short R4: Canonical identifier for this research element definition, represented as a URI (globally unique) (new)

Comments

Element ResearchElementDefinition.url is not mapped to FHIR STU3, since FHIR R4 ResearchElementDefinition is not mapped. Element ResearchElementDefinition.url has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Can be a urn:uuid: or a urn:oid: but real http: addresses are preferred. Multiple instances may share the same URL if they have a distinct version.

The determination of when to create a new version of a resource (same url, new version) vs. defining a new artifact is up to the author. Considerations for making this decision are found in Technical and Business Versions.

In some cases, the resource can no longer be found at the stated url, but the url itself cannot change. Implementations can use the meta.source element to indicate where the current master source of the resource can be found.

Control 0..1
This element is affected by the following invariants: ele-1

Type Extension(R4: Canonical identifier for this research element definition, represented as a URI (globally unique) (new)) (Extension Type: uri)

Is Modifier false

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())

18. Basic.extension:version

Slice Name version

Definition

R4: ResearchElementDefinition.version (new:string)

Short R4: Business version of the research element definition (new)

Comments

Element ResearchElementDefinition.version is not mapped to FHIR STU3, since FHIR R4 ResearchElementDefinition is not mapped. Element ResearchElementDefinition.version has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). There may be different research element definition instances that have the same identifier but different versions. The version can be appended to the url in a reference to allow a reference to a particular business version of the research element definition with the format [url]|[version].

Control 0..1
This element is affected by the following invariants: ele-1

Type Extension(R4: Business version of the research element definition (new)) (Extension Type: string)

Is Modifier false

20. Basic.extension:name

Slice Name name

Definition

R4: ResearchElementDefinition.name (new:string)

Short R4: Name for this research element definition (computer friendly) (new)

Comments

Element ResearchElementDefinition.name is not mapped to FHIR STU3, since FHIR R4 ResearchElementDefinition is not mapped. Element ResearchElementDefinition.name has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). The name is not expected to be globally unique. The name should be a simple alphanumeric type name to ensure that it is machine-processing friendly.

Control 0..1
This element is affected by the following invariants: ele-1

Type Extension(R4: Name for this research element definition (computer friendly) (new)) (Extension Type: string)

Is Modifier false

22. Basic.extension:title

Slice Name title

Definition

R4: ResearchElementDefinition.title (new:string)

Short R4: Name for this research element definition (human friendly) (new)

Comments

Element ResearchElementDefinition.title is not mapped to FHIR STU3, since FHIR R4 ResearchElementDefinition is not mapped. Element ResearchElementDefinition.title has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). This name does not need to be machine-processing friendly and may contain punctuation, white-space, etc.

Control 0..1
This element is affected by the following invariants: ele-1

Type Extension(R4: Name for this research element definition (human friendly) (new)) (Extension Type: string)

Is Modifier false

24. Basic.extension:shortTitle

Slice Name shortTitle

Definition

R4: ResearchElementDefinition.shortTitle (new:string)

Short R4: Title for use in informal contexts (new)

Comments

Element ResearchElementDefinition.shortTitle is not mapped to FHIR STU3, since FHIR R4 ResearchElementDefinition is not mapped. Element ResearchElementDefinition.shortTitle has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Control 0..1
This element is affected by the following invariants: ele-1

Type Extension(R4: Title for use in informal contexts (new)) (Extension Type: string)

Is Modifier false

26. Basic.extension:subtitle

Slice Name subtitle

Definition

R4: ResearchElementDefinition.subtitle (new:string)

Short R4: Subordinate title of the ResearchElementDefinition (new)

Comments

Element ResearchElementDefinition.subtitle is not mapped to FHIR STU3, since FHIR R4 ResearchElementDefinition is not mapped. Element ResearchElementDefinition.subtitle has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Control 0..1
This element is affected by the following invariants: ele-1

Type Extension(R4: Subordinate title of the ResearchElementDefinition (new)) (Extension Type: string)

Is Modifier false

28. Basic.extension:experimental

Slice Name experimental

Definition

R4: ResearchElementDefinition.experimental (new:boolean)

Short R4: For testing purposes, not real usage (new)

Comments

Element ResearchElementDefinition.experimental is not mapped to FHIR STU3, since FHIR R4 ResearchElementDefinition is not mapped. Element ResearchElementDefinition.experimental has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Allows filtering of research element definitions that are appropriate for use versus not.

Control 0..1
This element is affected by the following invariants: ele-1

Type Extension(R4: For testing purposes, not real usage (new)) (Extension Type: boolean)

Is Modifier false

30. Basic.extension:subject

Slice Name subject

Definition

R4: ResearchElementDefinition.subject[x] (new:CodeableConcept, Reference(Group))

Short R4: E.g. Patient, Practitioner, RelatedPerson, Organization, Location, Device (new)

Comments

Element ResearchElementDefinition.subject[x] is not mapped to FHIR STU3, since FHIR R4 ResearchElementDefinition is not mapped. Element ResearchElementDefinition.subject[x] has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). The subject of the ResearchElementDefinition is critical in interpreting the criteria definitions, as the logic in the ResearchElementDefinitions is evaluated with respect to a particular subject. This corresponds roughly to the notion of a Compartment in that it limits what content is available based on its relationship to the subject. In CQL, this corresponds to the context declaration.

Control 0..1
This element is affected by the following invariants: ele-1

Type Extension(R4: E.g. Patient, Practitioner, RelatedPerson, Organization, Location, Device (new)) (Extension Type: Choice of: CodeableConcept, Reference(Cross-version Profile for R4.Group for use in FHIR STU3, Group))

Is Modifier false

32. Basic.extension:date

Slice Name date

Definition

R4: ResearchElementDefinition.date (new:dateTime)

Short R4: Date last changed (new)

Comments

Element ResearchElementDefinition.date is not mapped to FHIR STU3, since FHIR R4 ResearchElementDefinition is not mapped. Element ResearchElementDefinition.date has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Note that this is not the same as the resource last-modified-date, since the resource may be a secondary representation of the research element definition. Additional specific dates may be added as extensions or be found by consulting Provenances associated with past versions of the resource.

Control 0..1
This element is affected by the following invariants: ele-1

Type Extension(R4: Date last changed (new)) (Extension Type: dateTime)

Is Modifier false

34. Basic.extension:publisher

Slice Name publisher

Definition

R4: ResearchElementDefinition.publisher (new:string)

Short R4: Name of the publisher (organization or individual) (new)

Comments

Element ResearchElementDefinition.publisher is not mapped to FHIR STU3, since FHIR R4 ResearchElementDefinition is not mapped. Element ResearchElementDefinition.publisher has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Usually an organization but may be an individual. The publisher (or steward) of the research element definition is the organization or individual primarily responsible for the maintenance and upkeep of the research element definition. This is not necessarily the same individual or organization that developed and initially authored the content. The publisher is the primary point of contact for questions or issues with the research element definition. This item SHOULD be populated unless the information is available from context.

Control 0..1
This element is affected by the following invariants: ele-1

Type Extension(R4: Name of the publisher (organization or individual) (new)) (Extension Type: string)

Is Modifier false

36. Basic.extension:contact

Slice Name contact

Definition

R4: ResearchElementDefinition.contact (new:ContactDetail)

Short R4: Contact details for the publisher (new)

Comments

Element ResearchElementDefinition.contact is not mapped to FHIR STU3, since FHIR R4 ResearchElementDefinition is not mapped. Element ResearchElementDefinition.contact has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). May be a web site, an email address, a telephone number, etc.

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(R4: Contact details for the publisher (new)) (Complex Extension)

Is Modifier false

38. Basic.extension:description

Slice Name description

Definition

R4: ResearchElementDefinition.description (new:markdown)

Short R4: Natural language description of the research element definition (new)

Comments

Element ResearchElementDefinition.description is not mapped to FHIR STU3, since FHIR R4 ResearchElementDefinition is not mapped. Element ResearchElementDefinition.description has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). This description can be used to capture details such as why the research element definition was built, comments about misuse, instructions for clinical use and interpretation, literature references, examples from the paper world, etc. It is not a rendering of the research element definition as conveyed in the 'text' field of the resource itself. This item SHOULD be populated unless the information is available from context (e.g. the language of the research element definition is presumed to be the predominant language in the place the research element definition was created).

Control 0..1
This element is affected by the following invariants: ele-1

Type Extension(R4: Natural language description of the research element definition (new)) (Extension Type: markdown)

Is Modifier false

40. Basic.extension:comment

Slice Name comment

Definition

R4: ResearchElementDefinition.comment (new:string)

Short R4: Used for footnotes or explanatory notes (new)

Comments

Element ResearchElementDefinition.comment is not mapped to FHIR STU3, since FHIR R4 ResearchElementDefinition is not mapped. Element ResearchElementDefinition.comment has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(R4: Used for footnotes or explanatory notes (new)) (Extension Type: string)

Is Modifier false

42. Basic.extension:useContext

Slice Name useContext

Definition

R4: ResearchElementDefinition.useContext (new:UsageContext)

Short R4: The context that the content is intended to support (new)

Comments

Element ResearchElementDefinition.useContext is not mapped to FHIR STU3, since FHIR R4 ResearchElementDefinition is not mapped. Element ResearchElementDefinition.useContext has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). When multiple useContexts are specified, there is no expectation that all or any of the contexts apply.

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(R4: The context that the content is intended to support (new)) (Complex Extension)

Is Modifier false

44. Basic.extension:jurisdiction

Slice Name jurisdiction

Definition

R4: ResearchElementDefinition.jurisdiction (new:CodeableConcept)

Short R4: Intended jurisdiction for research element definition (if applicable) (new)

Comments

Element ResearchElementDefinition.jurisdiction is not mapped to FHIR STU3, since FHIR R4 ResearchElementDefinition is not mapped. Element ResearchElementDefinition.jurisdiction has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). It may be possible for the research element definition to be used in jurisdictions other than those for which it was originally designed or intended.

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(R4: Intended jurisdiction for research element definition (if applicable) (new)) (Extension Type: CodeableConcept)

Is Modifier false

46. Basic.extension:purpose

Slice Name purpose

Definition

R4: ResearchElementDefinition.purpose (new:markdown)

Short R4: Why this research element definition is defined (new)

Comments

Element ResearchElementDefinition.purpose is not mapped to FHIR STU3, since FHIR R4 ResearchElementDefinition is not mapped. Element ResearchElementDefinition.purpose has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). This element does not describe the usage of the research element definition. Instead, it provides traceability of ''why'' the resource is either needed or ''why'' it is defined as it is. This may be used to point to source materials or specifications that drove the structure of this research element definition.

Control 0..1
This element is affected by the following invariants: ele-1

Type Extension(R4: Why this research element definition is defined (new)) (Extension Type: markdown)

Is Modifier false

48. Basic.extension:usage

Slice Name usage

Definition

R4: ResearchElementDefinition.usage (new:string)

Short R4: Describes the clinical usage of the ResearchElementDefinition (new)

Comments

Element ResearchElementDefinition.usage is not mapped to FHIR STU3, since FHIR R4 ResearchElementDefinition is not mapped. Element ResearchElementDefinition.usage has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Control 0..1
This element is affected by the following invariants: ele-1

Type Extension(R4: Describes the clinical usage of the ResearchElementDefinition (new)) (Extension Type: string)

Is Modifier false

50. Basic.extension:copyright

Slice Name copyright

Definition

R4: ResearchElementDefinition.copyright (new:markdown)

Short R4: Use and/or publishing restrictions (new)

Comments

Element ResearchElementDefinition.copyright is not mapped to FHIR STU3, since FHIR R4 ResearchElementDefinition is not mapped. Element ResearchElementDefinition.copyright has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Control 0..1
This element is affected by the following invariants: ele-1

Type Extension(R4: Use and/or publishing restrictions (new)) (Extension Type: markdown)

Is Modifier false

52. Basic.extension:approvalDate

Slice Name approvalDate

Definition

R4: ResearchElementDefinition.approvalDate (new:date)

Short R4: When the research element definition was approved by publisher (new)

Comments

Element ResearchElementDefinition.approvalDate is not mapped to FHIR STU3, since FHIR R4 ResearchElementDefinition is not mapped. Element ResearchElementDefinition.approvalDate has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). The 'date' element may be more recent than the approval date because of minor changes or editorial corrections.

Control 0..1
This element is affected by the following invariants: ele-1

Type Extension(R4: When the research element definition was approved by publisher (new)) (Extension Type: date)

Is Modifier false

54. Basic.extension:lastReviewDate

Slice Name lastReviewDate

Definition

R4: ResearchElementDefinition.lastReviewDate (new:date)

Short R4: When the research element definition was last reviewed (new)

Comments

Element ResearchElementDefinition.lastReviewDate is not mapped to FHIR STU3, since FHIR R4 ResearchElementDefinition is not mapped. Element ResearchElementDefinition.lastReviewDate has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). If specified, this date follows the original approval date.

Control 0..1
This element is affected by the following invariants: ele-1

Type Extension(R4: When the research element definition was last reviewed (new)) (Extension Type: date)

Is Modifier false

56. Basic.extension:effectivePeriod

Slice Name effectivePeriod

Definition

R4: ResearchElementDefinition.effectivePeriod (new:Period)

Short R4: When the research element definition is expected to be used (new)

Comments

Element ResearchElementDefinition.effectivePeriod is not mapped to FHIR STU3, since FHIR R4 ResearchElementDefinition is not mapped. Element ResearchElementDefinition.effectivePeriod has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). The effective period for a research element definition determines when the content is applicable for usage and is independent of publication and review dates. For example, a measure intended to be used for the year 2016 might be published in 2015.

Control 0..1
This element is affected by the following invariants: ele-1

Type Extension(R4: When the research element definition is expected to be used (new)) (Extension Type: Period)

Is Modifier false

58. Basic.extension:topic

Slice Name topic

Definition

R4: ResearchElementDefinition.topic (new:CodeableConcept)

Short R4: The category of the ResearchElementDefinition, such as Education, Treatment, Assessment, etc. (new)

Comments

Element ResearchElementDefinition.topic is not mapped to FHIR STU3, since FHIR R4 ResearchElementDefinition is not mapped. Element ResearchElementDefinition.topic has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(R4: The category of the ResearchElementDefinition, such as Education, Treatment, Assessment, etc. (new)) (Extension Type: CodeableConcept)

Is Modifier false

60. Basic.extension:author

Slice Name author

Definition

R4: ResearchElementDefinition.author (new:ContactDetail)

Short R4: Who authored the content (new)

Comments

Element ResearchElementDefinition.author is not mapped to FHIR STU3, since FHIR R4 ResearchElementDefinition is not mapped. Element ResearchElementDefinition.author has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). While the source element matches Basic element path (), the definitions are not compatible (source: ContactDetail:0..* -> basic: Reference(http://hl7.org/fhir/StructureDefinition/Practitioner,http://hl7.org/fhir/StructureDefinition/Patient,http://hl7.org/fhir/StructureDefinition/RelatedPerson):0..1).

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(R4: Who authored the content (new)) (Complex Extension)

Is Modifier false

62. Basic.extension:editor

Slice Name editor

Definition

R4: ResearchElementDefinition.editor (new:ContactDetail)

Short R4: Who edited the content (new)

Comments

Element ResearchElementDefinition.editor is not mapped to FHIR STU3, since FHIR R4 ResearchElementDefinition is not mapped. Element ResearchElementDefinition.editor has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(R4: Who edited the content (new)) (Complex Extension)

Is Modifier false

64. Basic.extension:reviewer

Slice Name reviewer

Definition

R4: ResearchElementDefinition.reviewer (new:ContactDetail)

Short R4: Who reviewed the content (new)

Comments

Element ResearchElementDefinition.reviewer is not mapped to FHIR STU3, since FHIR R4 ResearchElementDefinition is not mapped. Element ResearchElementDefinition.reviewer has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(R4: Who reviewed the content (new)) (Complex Extension)

Is Modifier false

66. Basic.extension:endorser

Slice Name endorser

Definition

R4: ResearchElementDefinition.endorser (new:ContactDetail)

Short R4: Who endorsed the content (new)

Comments

Element ResearchElementDefinition.endorser is not mapped to FHIR STU3, since FHIR R4 ResearchElementDefinition is not mapped. Element ResearchElementDefinition.endorser has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(R4: Who endorsed the content (new)) (Complex Extension)

Is Modifier false

68. Basic.extension:relatedArtifact

Slice Name relatedArtifact

Definition

R4: ResearchElementDefinition.relatedArtifact (new:RelatedArtifact)

Short R4: Additional documentation, citations, etc. (new)

Comments

Element ResearchElementDefinition.relatedArtifact is not mapped to FHIR STU3, since FHIR R4 ResearchElementDefinition is not mapped. Element ResearchElementDefinition.relatedArtifact has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Each related artifact is either an attachment, or a reference to another resource, but not both.

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(R4: Additional documentation, citations, etc. (new)) (Complex Extension)

Is Modifier false

70. Basic.extension:library

Slice Name library

Definition

R4: ResearchElementDefinition.library (new:canonical(Library))

Short R4: Logic used by the ResearchElementDefinition (new)

Comments

Element ResearchElementDefinition.library is not mapped to FHIR STU3, since FHIR R4 ResearchElementDefinition is not mapped. Element ResearchElementDefinition.library has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(R4: Logic used by the ResearchElementDefinition (new)) (Extension Type: uri(Cross-version Profile for R4.Library for use in FHIR STU3, Library))

Is Modifier false

72. Basic.extension:type

Slice Name type

Definition

R4: ResearchElementDefinition.type (new:code)

Short R4: population | exposure | outcome (new)

Comments

Element ResearchElementDefinition.type is not mapped to FHIR STU3, since FHIR R4 ResearchElementDefinition is not mapped. Element ResearchElementDefinition.type has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Control 1..1
This element is affected by the following invariants: ele-1

Type Extension(R4: population | exposure | outcome (new)) (Extension Type: code)

Is Modifier false

74. Basic.extension:variableType

Slice Name variableType

Definition

R4: ResearchElementDefinition.variableType (new:code)

Short R4: dichotomous | continuous | descriptive (new)

Comments

Element ResearchElementDefinition.variableType is not mapped to FHIR STU3, since FHIR R4 ResearchElementDefinition is not mapped. Element ResearchElementDefinition.variableType has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Control 0..1
This element is affected by the following invariants: ele-1

Type Extension(R4: dichotomous | continuous | descriptive (new)) (Extension Type: code)

Is Modifier false

76. Basic.extension:characteristic

Slice Name characteristic

Definition

R4: ResearchElementDefinition.characteristic (new:BackboneElement)

Short R4: What defines the members of the research element (new)

Comments

Element ResearchElementDefinition.characteristic is not mapped to FHIR STU3, since FHIR R4 ResearchElementDefinition is not mapped. Element ResearchElementDefinition.characteristic has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Characteristics can be defined flexibly to accommodate different use cases for membership criteria, ranging from simple codes, all the way to using an expression language to express the criteria.

Control 1..*
This element is affected by the following invariants: ele-1

Type Extension(R4: What defines the members of the research element (new)) (Complex Extension)

Is Modifier false

78. Basic.modifierExtension

Definition

An Extension

Short Extension

Control 0..*

Type

Extension

Is Modifier true because No Modifier Reason provideed in previous versions of FHIR

Slicing

This element introduces a set of slices on Basic.modifierExtension. The slices areUnordered and Open, and can be differentiated using the following discriminators:

value @ url

80. Basic.modifierExtension:status

Slice Name status

Definition

R4: ResearchElementDefinition.status (new:code)

Short R4: draft | active | retired | unknown (new)

Comments

Element ResearchElementDefinition.status is not mapped to FHIR STU3, since FHIR R4 ResearchElementDefinition is not mapped. Element ResearchElementDefinition.status has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Allows filtering of research element definitions that are appropriate for use versus not.

Control 1..1
This element is affected by the following invariants: ele-1

Type Extension(R4: draft | active | retired | unknown (new)) (Extension Type: code)

Is Modifier true because No Modifier Reason provideed in previous versions of FHIR

82. Basic.identifier

Definition

Identifier assigned to the resource for business purposes, outside the context of FHIR.

Short Business identifier

Note This is a business identifier, not a resource identifier (see discussion)

Control 0..*

Type

Identifier

Summary true

84. Basic.code

Definition

Identifies the 'type' of resource - equivalent to the resource name for other resources.

Short Kind of Resource

Comments

Because resource references will only be able to indicate 'Basic', the type of reference will need to be specified in a Profile identified as part of the resource. Refer to the resource notes section for information on appropriate terminologies for this code.

This element is labeled as a modifier because the it defines the meaning of the resource and cannot be ignored.

Control 1..1

Binding

For example codes, see Basic Resource Types
(example to http://hl7.org/fhir/ValueSet/basic-resource-type|3.0.2)

Codes for identifying types of resources not yet defined by FHIR

Type

CodeableConcept

Is Modifier true because No Modifier Reason provideed in previous versions of FHIR

Summary true

Requirements

Must be able to distinguish different types of Basic resources.

86. Basic.subject

Definition

Identifies the patient, practitioner, device or any other resource that is the "focus" of this resource.

Short Identifies the focus of this resource

Comments

Optional as not all potential resources will have subjects. Resources associated with multiple subjects can handle this via extension.

Control 0..1

Type Reference(Resource)

Summary true

Requirements

Needed for partitioning the resource by Patient.

88. Basic.created

Definition

Identifies when the resource was first created.

Short When created

Control 0..1

Type

date

Primitive Value This primitive element may be present, or absent, or replaced by an extension

Summary true

Requirements

Allows ordering resource instances by time.

90. Basic.author

Definition

Indicates who was responsible for creating the resource instance.

Short Who created

Control 0..1

Type Reference(Practitioner, Patient, RelatedPerson)

Summary true

Requirements

Needed for partitioning the resource.