Extensions for Using Data Elements from FHIR R4 in FHIR STU3
0.1.0 - STU International flag

Extensions for Using Data Elements from FHIR R4 in FHIR STU3 - Downloaded Version null See the Directory of published versions

Resource Profile: Profile_R4_MedicationKnowledge_R3 - Detailed Descriptions

Page standards status: Trial-use Maturity Level: 0

Definitions for the profile-MedicationKnowledge resource profile.

Guidance on how to interpret the contents of this table can be foundhere

0. Basic
Definition

Basic is used for handling concepts not yet defined in FHIR, narrative-only resources that don't map to an existing resource, and custom resources not appropriate for inclusion in the FHIR specification.

ShortResource for non-supported content
Control0..*
Alternate NamesZ-resource, Extension-resource, Custom-resource
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-1: If the resource is contained in another resource, it SHALL NOT contain any narrative (contained.text.empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource (contained.where(('#'+id in %resource.descendants().reference).not()).empty())
dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-1: If the resource is contained in another resource, it SHALL NOT contain any narrative (contained.text.empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource (contained.where(('#'+id in %resource.descendants().reference).not()).empty())
2. Basic.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element.

This element is labelled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation.

Control0..1
Typeuri
Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
4. Basic.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the resource. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional Content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Alternate Namesextensions, user content
SlicingThis element introduces a set of slices on Basic.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 6. Basic.extension:code
    Slice Namecode
    Definition

    R4: MedicationKnowledge.code (new:CodeableConcept)

    ShortR4: Code that identifies this medication (new)
    Comments

    Element MedicationKnowledge.code is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.code has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Depending on the context of use, the code that was actually selected by the user (prescriber, dispenser, etc.) will have the coding.userSelected set to true. As described in the coding datatype: "A coding may be marked as a "userSelected" if a user selected the particular coded value in a user interface (e.g. the user selects an item in a pick-list). If a user selected coding exists, it is the preferred choice for performing translations etc. Other codes can only be literal translations to alternative code systems, or codes at a lower level of granularity (e.g. a generic code for a vendor-specific primary one).

    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(R4: Code that identifies this medication (new)) (Extension Type: CodeableConcept)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    8. Basic.extension:manufacturer
    Slice Namemanufacturer
    Definition

    R4: MedicationKnowledge.manufacturer (new:Reference(Organization))

    ShortR4: Manufacturer of the item (new)
    Comments

    Element MedicationKnowledge.manufacturer is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.manufacturer has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(R4: Manufacturer of the item (new)) (Extension Type: Reference(Cross-version Profile for R4.Organization for use in FHIR STU3, Organization))
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    10. Basic.extension:doseForm
    Slice NamedoseForm
    Definition

    R4: MedicationKnowledge.doseForm (new:CodeableConcept)

    ShortR4: powder | tablets | capsule + (new)
    Comments

    Element MedicationKnowledge.doseForm is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.doseForm has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). When Medication is referenced from MedicationRequest, this is the ordered form. When Medication is referenced within MedicationDispense, this is the dispensed form. When Medication is referenced within MedicationAdministration, this is administered form.

    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(R4: powder | tablets | capsule + (new)) (Extension Type: CodeableConcept)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    12. Basic.extension:amount
    Slice Nameamount
    Definition

    R4: MedicationKnowledge.amount (new:Quantity[SimpleQuantity])

    ShortR4: Amount of drug in package (new)
    Comments

    Element MedicationKnowledge.amount is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.amount has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). This is the quantity of medication in a package. To specify the strength of the medication, the Ingredient.strength attribute is used.

    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(R4: Amount of drug in package (new)) (Extension Type: Quantity(SimpleQuantity))
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    14. Basic.extension:synonym
    Slice Namesynonym
    Definition

    R4: MedicationKnowledge.synonym (new:string)

    ShortR4: Additional names for a medication (new)
    Comments

    Element MedicationKnowledge.synonym is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.synonym has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension(R4: Additional names for a medication (new)) (Extension Type: string)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    16. Basic.extension:relatedMedicationKnowledge
    Slice NamerelatedMedicationKnowledge
    Definition

    R4: MedicationKnowledge.relatedMedicationKnowledge (new:BackboneElement)

    ShortR4: Associated or related medication information (new)
    Comments

    Element MedicationKnowledge.relatedMedicationKnowledge is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.relatedMedicationKnowledge has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension(R4: Associated or related medication information (new)) (Complex Extension)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    18. Basic.extension:associatedMedication
    Slice NameassociatedMedication
    Definition

    R4: MedicationKnowledge.associatedMedication (new:Reference(Medication))

    ShortR4: A medication resource that is associated with this medication (new)
    Comments

    Element MedicationKnowledge.associatedMedication is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.associatedMedication has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension(R4: A medication resource that is associated with this medication (new)) (Extension Type: Reference(Cross-version Profile for R4.Medication for use in FHIR STU3, Medication))
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    20. Basic.extension:productType
    Slice NameproductType
    Definition

    R4: MedicationKnowledge.productType (new:CodeableConcept)

    ShortR4: Category of the medication or product (new)
    Comments

    Element MedicationKnowledge.productType is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.productType has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension(R4: Category of the medication or product (new)) (Extension Type: CodeableConcept)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    22. Basic.extension:monograph
    Slice Namemonograph
    Definition

    R4: MedicationKnowledge.monograph (new:BackboneElement)

    ShortR4: Associated documentation about the medication (new)
    Comments

    Element MedicationKnowledge.monograph is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.monograph has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension(R4: Associated documentation about the medication (new)) (Complex Extension)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    24. Basic.extension:ingredient
    Slice Nameingredient
    Definition

    R4: MedicationKnowledge.ingredient (new:BackboneElement)

    ShortR4: Active or inactive ingredient (new)
    Comments

    Element MedicationKnowledge.ingredient is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.ingredient has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension(R4: Active or inactive ingredient (new)) (Complex Extension)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    26. Basic.extension:preparationInstruction
    Slice NamepreparationInstruction
    Definition

    R4: MedicationKnowledge.preparationInstruction (new:markdown)

    ShortR4: The instructions for preparing the medication (new)
    Comments

    Element MedicationKnowledge.preparationInstruction is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.preparationInstruction has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(R4: The instructions for preparing the medication (new)) (Extension Type: markdown)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    28. Basic.extension:intendedRoute
    Slice NameintendedRoute
    Definition

    R4: MedicationKnowledge.intendedRoute (new:CodeableConcept)

    ShortR4: The intended or approved route of administration (new)
    Comments

    Element MedicationKnowledge.intendedRoute is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.intendedRoute has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension(R4: The intended or approved route of administration (new)) (Extension Type: CodeableConcept)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    30. Basic.extension:cost
    Slice Namecost
    Definition

    R4: MedicationKnowledge.cost (new:BackboneElement)

    ShortR4: The pricing of the medication (new)
    Comments

    Element MedicationKnowledge.cost is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.cost has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension(R4: The pricing of the medication (new)) (Complex Extension)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    32. Basic.extension:monitoringProgram
    Slice NamemonitoringProgram
    Definition

    R4: MedicationKnowledge.monitoringProgram (new:BackboneElement)

    ShortR4: Program under which a medication is reviewed (new)
    Comments

    Element MedicationKnowledge.monitoringProgram is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.monitoringProgram has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension(R4: Program under which a medication is reviewed (new)) (Complex Extension)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    34. Basic.extension:administrationGuidelines
    Slice NameadministrationGuidelines
    Definition

    R4: MedicationKnowledge.administrationGuidelines (new:BackboneElement)

    ShortR4: Guidelines for administration of the medication (new)
    Comments

    Element MedicationKnowledge.administrationGuidelines is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.administrationGuidelines has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension(R4: Guidelines for administration of the medication (new)) (Complex Extension)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    36. Basic.extension:medicineClassification
    Slice NamemedicineClassification
    Definition

    R4: MedicationKnowledge.medicineClassification (new:BackboneElement)

    ShortR4: Categorization of the medication within a formulary or classification system (new)
    Comments

    Element MedicationKnowledge.medicineClassification is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.medicineClassification has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension(R4: Categorization of the medication within a formulary or classification system (new)) (Complex Extension)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    38. Basic.extension:packaging
    Slice Namepackaging
    Definition

    R4: MedicationKnowledge.packaging (new:BackboneElement)

    ShortR4: Details about packaged medications (new)
    Comments

    Element MedicationKnowledge.packaging is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.packaging has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(R4: Details about packaged medications (new)) (Complex Extension)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    40. Basic.extension:drugCharacteristic
    Slice NamedrugCharacteristic
    Definition

    R4: MedicationKnowledge.drugCharacteristic (new:BackboneElement)

    ShortR4: Specifies descriptive properties of the medicine (new)
    Comments

    Element MedicationKnowledge.drugCharacteristic is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.drugCharacteristic has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension(R4: Specifies descriptive properties of the medicine (new)) (Complex Extension)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    42. Basic.extension:contraindication
    Slice Namecontraindication
    Definition

    R4: MedicationKnowledge.contraindication (new:Reference(DetectedIssue))

    ShortR4: Potential clinical issue with or between medication(s) (new)
    Comments

    Element MedicationKnowledge.contraindication is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.contraindication has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension(R4: Potential clinical issue with or between medication(s) (new)) (Extension Type: Reference(Cross-version Profile for R4.DetectedIssue for use in FHIR STU3, DetectedIssue))
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    44. Basic.extension:regulatory
    Slice Nameregulatory
    Definition

    R4: MedicationKnowledge.regulatory (new:BackboneElement)

    ShortR4: Regulatory information about a medication (new)
    Comments

    Element MedicationKnowledge.regulatory is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.regulatory has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension(R4: Regulatory information about a medication (new)) (Complex Extension)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    46. Basic.extension:kinetics
    Slice Namekinetics
    Definition

    R4: MedicationKnowledge.kinetics (new:BackboneElement)

    ShortR4: The time course of drug absorption, distribution, metabolism and excretion of a medication from the body (new)
    Comments

    Element MedicationKnowledge.kinetics is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.kinetics has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension(R4: The time course of drug absorption, distribution, metabolism and excretion of a medication from the body (new)) (Complex Extension)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    48. Basic.modifierExtension
    Definition

    An Extension


    May be used to represent additional information that is not part of the basic definition of the resource, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    ShortExtensionExtensions that cannot be ignored
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
    Alternate Namesextensions, user content
    SlicingThis element introduces a set of slices on Basic.modifierExtension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • 50. Basic.modifierExtension:status
      Slice Namestatus
      Definition

      R4: MedicationKnowledge.status (new:code)

      ShortR4: active | inactive | entered-in-error (new)
      Comments

      Element MedicationKnowledge.status is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.status has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R4 element MedicationKnowledge.status: http://hl7.org/fhir/StructureDefinition/artifact-status. This status is intended to identify if the medication in a local system is in active use within a drug database or inventory. For example, a pharmacy system may create a new drug file record for a compounded product "ABC Hospital Special Cream" with an active status. At some point in the future, it may be determined that the drug record was created with an error and the status is changed to "entered in error". This status is not intended to specify if a medication is part of a particular formulary. It is possible that the drug record may be referenced by multiple formularies or catalogues and each of those entries would have a separate status.

      Control0..1
      TypeExtension(http://hl7.org/fhir/StructureDefinition/artifact-status)
      Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
      52. Basic.code
      Definition

      Identifies the 'type' of resource - equivalent to the resource name for other resources.

      ShortKind of Resource
      Comments

      Because resource references will only be able to indicate 'Basic', the type of reference will need to be specified in a Profile identified as part of the resource. Refer to the resource notes section for information on appropriate terminologies for this code.

      This element is labeled as a modifier because the it defines the meaning of the resource and cannot be ignored.

      Control1..1
      BindingFor example codes, see Basic Resource Typeshttp://hl7.org/fhir/ValueSet/basic-resource-type|3.0.2
      (example to http://hl7.org/fhir/ValueSet/basic-resource-type|3.0.2)

      Codes for identifying types of resources not yet defined by FHIR

      TypeCodeableConcept
      Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
      Summarytrue
      Requirements

      Must be able to distinguish different types of Basic resources.

      Guidance on how to interpret the contents of this table can be foundhere

      0. Basic
      2. Basic.extension
      Control0..*
      SlicingThis element introduces a set of slices on Basic.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 4. Basic.extension:code
        Slice Namecode
        Definition

        R4: MedicationKnowledge.code (new:CodeableConcept)

        ShortR4: Code that identifies this medication (new)
        Comments

        Element MedicationKnowledge.code is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.code has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Depending on the context of use, the code that was actually selected by the user (prescriber, dispenser, etc.) will have the coding.userSelected set to true. As described in the coding datatype: "A coding may be marked as a "userSelected" if a user selected the particular coded value in a user interface (e.g. the user selects an item in a pick-list). If a user selected coding exists, it is the preferred choice for performing translations etc. Other codes can only be literal translations to alternative code systems, or codes at a lower level of granularity (e.g. a generic code for a vendor-specific primary one).

        Control0..1
        TypeExtension(R4: Code that identifies this medication (new)) (Extension Type: CodeableConcept)
        6. Basic.extension:manufacturer
        Slice Namemanufacturer
        Definition

        R4: MedicationKnowledge.manufacturer (new:Reference(Organization))

        ShortR4: Manufacturer of the item (new)
        Comments

        Element MedicationKnowledge.manufacturer is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.manufacturer has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..1
        TypeExtension(R4: Manufacturer of the item (new)) (Extension Type: Reference(Cross-version Profile for R4.Organization for use in FHIR STU3, Organization))
        8. Basic.extension:doseForm
        Slice NamedoseForm
        Definition

        R4: MedicationKnowledge.doseForm (new:CodeableConcept)

        ShortR4: powder | tablets | capsule + (new)
        Comments

        Element MedicationKnowledge.doseForm is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.doseForm has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). When Medication is referenced from MedicationRequest, this is the ordered form. When Medication is referenced within MedicationDispense, this is the dispensed form. When Medication is referenced within MedicationAdministration, this is administered form.

        Control0..1
        TypeExtension(R4: powder | tablets | capsule + (new)) (Extension Type: CodeableConcept)
        10. Basic.extension:amount
        Slice Nameamount
        Definition

        R4: MedicationKnowledge.amount (new:Quantity[SimpleQuantity])

        ShortR4: Amount of drug in package (new)
        Comments

        Element MedicationKnowledge.amount is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.amount has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). This is the quantity of medication in a package. To specify the strength of the medication, the Ingredient.strength attribute is used.

        Control0..1
        TypeExtension(R4: Amount of drug in package (new)) (Extension Type: Quantity(SimpleQuantity))
        12. Basic.extension:synonym
        Slice Namesynonym
        Definition

        R4: MedicationKnowledge.synonym (new:string)

        ShortR4: Additional names for a medication (new)
        Comments

        Element MedicationKnowledge.synonym is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.synonym has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..*
        TypeExtension(R4: Additional names for a medication (new)) (Extension Type: string)
        14. Basic.extension:relatedMedicationKnowledge
        Slice NamerelatedMedicationKnowledge
        Definition

        R4: MedicationKnowledge.relatedMedicationKnowledge (new:BackboneElement)

        ShortR4: Associated or related medication information (new)
        Comments

        Element MedicationKnowledge.relatedMedicationKnowledge is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.relatedMedicationKnowledge has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..*
        TypeExtension(R4: Associated or related medication information (new)) (Complex Extension)
        16. Basic.extension:associatedMedication
        Slice NameassociatedMedication
        Definition

        R4: MedicationKnowledge.associatedMedication (new:Reference(Medication))

        ShortR4: A medication resource that is associated with this medication (new)
        Comments

        Element MedicationKnowledge.associatedMedication is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.associatedMedication has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..*
        TypeExtension(R4: A medication resource that is associated with this medication (new)) (Extension Type: Reference(Cross-version Profile for R4.Medication for use in FHIR STU3, Medication))
        18. Basic.extension:productType
        Slice NameproductType
        Definition

        R4: MedicationKnowledge.productType (new:CodeableConcept)

        ShortR4: Category of the medication or product (new)
        Comments

        Element MedicationKnowledge.productType is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.productType has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..*
        TypeExtension(R4: Category of the medication or product (new)) (Extension Type: CodeableConcept)
        20. Basic.extension:monograph
        Slice Namemonograph
        Definition

        R4: MedicationKnowledge.monograph (new:BackboneElement)

        ShortR4: Associated documentation about the medication (new)
        Comments

        Element MedicationKnowledge.monograph is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.monograph has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..*
        TypeExtension(R4: Associated documentation about the medication (new)) (Complex Extension)
        22. Basic.extension:ingredient
        Slice Nameingredient
        Definition

        R4: MedicationKnowledge.ingredient (new:BackboneElement)

        ShortR4: Active or inactive ingredient (new)
        Comments

        Element MedicationKnowledge.ingredient is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.ingredient has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..*
        TypeExtension(R4: Active or inactive ingredient (new)) (Complex Extension)
        24. Basic.extension:preparationInstruction
        Slice NamepreparationInstruction
        Definition

        R4: MedicationKnowledge.preparationInstruction (new:markdown)

        ShortR4: The instructions for preparing the medication (new)
        Comments

        Element MedicationKnowledge.preparationInstruction is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.preparationInstruction has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..1
        TypeExtension(R4: The instructions for preparing the medication (new)) (Extension Type: markdown)
        26. Basic.extension:intendedRoute
        Slice NameintendedRoute
        Definition

        R4: MedicationKnowledge.intendedRoute (new:CodeableConcept)

        ShortR4: The intended or approved route of administration (new)
        Comments

        Element MedicationKnowledge.intendedRoute is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.intendedRoute has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..*
        TypeExtension(R4: The intended or approved route of administration (new)) (Extension Type: CodeableConcept)
        28. Basic.extension:cost
        Slice Namecost
        Definition

        R4: MedicationKnowledge.cost (new:BackboneElement)

        ShortR4: The pricing of the medication (new)
        Comments

        Element MedicationKnowledge.cost is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.cost has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..*
        TypeExtension(R4: The pricing of the medication (new)) (Complex Extension)
        30. Basic.extension:monitoringProgram
        Slice NamemonitoringProgram
        Definition

        R4: MedicationKnowledge.monitoringProgram (new:BackboneElement)

        ShortR4: Program under which a medication is reviewed (new)
        Comments

        Element MedicationKnowledge.monitoringProgram is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.monitoringProgram has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..*
        TypeExtension(R4: Program under which a medication is reviewed (new)) (Complex Extension)
        32. Basic.extension:administrationGuidelines
        Slice NameadministrationGuidelines
        Definition

        R4: MedicationKnowledge.administrationGuidelines (new:BackboneElement)

        ShortR4: Guidelines for administration of the medication (new)
        Comments

        Element MedicationKnowledge.administrationGuidelines is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.administrationGuidelines has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..*
        TypeExtension(R4: Guidelines for administration of the medication (new)) (Complex Extension)
        34. Basic.extension:medicineClassification
        Slice NamemedicineClassification
        Definition

        R4: MedicationKnowledge.medicineClassification (new:BackboneElement)

        ShortR4: Categorization of the medication within a formulary or classification system (new)
        Comments

        Element MedicationKnowledge.medicineClassification is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.medicineClassification has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..*
        TypeExtension(R4: Categorization of the medication within a formulary or classification system (new)) (Complex Extension)
        36. Basic.extension:packaging
        Slice Namepackaging
        Definition

        R4: MedicationKnowledge.packaging (new:BackboneElement)

        ShortR4: Details about packaged medications (new)
        Comments

        Element MedicationKnowledge.packaging is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.packaging has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..1
        TypeExtension(R4: Details about packaged medications (new)) (Complex Extension)
        38. Basic.extension:drugCharacteristic
        Slice NamedrugCharacteristic
        Definition

        R4: MedicationKnowledge.drugCharacteristic (new:BackboneElement)

        ShortR4: Specifies descriptive properties of the medicine (new)
        Comments

        Element MedicationKnowledge.drugCharacteristic is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.drugCharacteristic has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..*
        TypeExtension(R4: Specifies descriptive properties of the medicine (new)) (Complex Extension)
        40. Basic.extension:contraindication
        Slice Namecontraindication
        Definition

        R4: MedicationKnowledge.contraindication (new:Reference(DetectedIssue))

        ShortR4: Potential clinical issue with or between medication(s) (new)
        Comments

        Element MedicationKnowledge.contraindication is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.contraindication has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..*
        TypeExtension(R4: Potential clinical issue with or between medication(s) (new)) (Extension Type: Reference(Cross-version Profile for R4.DetectedIssue for use in FHIR STU3, DetectedIssue))
        42. Basic.extension:regulatory
        Slice Nameregulatory
        Definition

        R4: MedicationKnowledge.regulatory (new:BackboneElement)

        ShortR4: Regulatory information about a medication (new)
        Comments

        Element MedicationKnowledge.regulatory is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.regulatory has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..*
        TypeExtension(R4: Regulatory information about a medication (new)) (Complex Extension)
        44. Basic.extension:kinetics
        Slice Namekinetics
        Definition

        R4: MedicationKnowledge.kinetics (new:BackboneElement)

        ShortR4: The time course of drug absorption, distribution, metabolism and excretion of a medication from the body (new)
        Comments

        Element MedicationKnowledge.kinetics is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.kinetics has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..*
        TypeExtension(R4: The time course of drug absorption, distribution, metabolism and excretion of a medication from the body (new)) (Complex Extension)
        46. Basic.modifierExtension
        Control0..*
        SlicingThis element introduces a set of slices on Basic.modifierExtension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 48. Basic.modifierExtension:status
          Slice Namestatus
          Definition

          R4: MedicationKnowledge.status (new:code)

          ShortR4: active | inactive | entered-in-error (new)
          Comments

          Element MedicationKnowledge.status is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.status has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R4 element MedicationKnowledge.status: http://hl7.org/fhir/StructureDefinition/artifact-status. This status is intended to identify if the medication in a local system is in active use within a drug database or inventory. For example, a pharmacy system may create a new drug file record for a compounded product "ABC Hospital Special Cream" with an active status. At some point in the future, it may be determined that the drug record was created with an error and the status is changed to "entered in error". This status is not intended to specify if a medication is part of a particular formulary. It is possible that the drug record may be referenced by multiple formularies or catalogues and each of those entries would have a separate status.

          Control0..1
          TypeExtension(http://hl7.org/fhir/StructureDefinition/artifact-status)

          Guidance on how to interpret the contents of this table can be foundhere

          0. Basic
          Definition

          Basic is used for handling concepts not yet defined in FHIR, narrative-only resources that don't map to an existing resource, and custom resources not appropriate for inclusion in the FHIR specification.

          ShortResource for non-supported content
          Control0..*
          Alternate NamesZ-resource, Extension-resource, Custom-resource
          Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
          dom-1: If the resource is contained in another resource, it SHALL NOT contain any narrative (contained.text.empty())
          dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
          dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource (contained.where(('#'+id in %resource.descendants().reference).not()).empty())
          2. Basic.id
          Definition

          The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

          ShortLogical id of this artifact
          Comments

          The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

          Control0..1
          Typeid
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          4. Basic.meta
          Definition

          The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content may not always be associated with version changes to the resource.

          ShortMetadata about the resource
          Control0..1
          TypeMeta
          Summarytrue
          6. Basic.implicitRules
          Definition

          A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content.

          ShortA set of rules under which this content was created
          Comments

          Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element.

          This element is labelled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation.

          Control0..1
          Typeuri
          Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          8. Basic.language
          Definition

          The base language in which the resource is written.

          ShortLanguage of the resource content
          Comments

          Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

          Control0..1
          BindingUnless not suitable, these codes SHALL be taken from Common Languages
          (extensible to http://hl7.org/fhir/ValueSet/languages|3.0.2)

          A human language.

          Additional BindingsPurpose
          All LanguagesMax Binding
          Typecode
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          10. Basic.text
          Definition

          A human-readable narrative that contains a summary of the resource, and may be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

          ShortText summary of the resource, for human interpretation
          Comments

          Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded in formation is added later.

          Control0..1
          This element is affected by the following invariants: dom-1
          TypeNarrative
          Alternate Namesnarrative, html, xhtml, display
          12. Basic.contained
          Definition

          These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

          ShortContained, inline Resources
          Comments

          This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again.

          Control0..*
          TypeResource
          Alternate Namesinline resources, anonymous resources, contained resources
          14. Basic.extension
          Definition

          An Extension

          ShortExtension
          Control0..*
          TypeExtension
          SlicingThis element introduces a set of slices on Basic.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ url
          • 16. Basic.extension:code
            Slice Namecode
            Definition

            R4: MedicationKnowledge.code (new:CodeableConcept)

            ShortR4: Code that identifies this medication (new)
            Comments

            Element MedicationKnowledge.code is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.code has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Depending on the context of use, the code that was actually selected by the user (prescriber, dispenser, etc.) will have the coding.userSelected set to true. As described in the coding datatype: "A coding may be marked as a "userSelected" if a user selected the particular coded value in a user interface (e.g. the user selects an item in a pick-list). If a user selected coding exists, it is the preferred choice for performing translations etc. Other codes can only be literal translations to alternative code systems, or codes at a lower level of granularity (e.g. a generic code for a vendor-specific primary one).

            Control0..1
            This element is affected by the following invariants: ele-1
            TypeExtension(R4: Code that identifies this medication (new)) (Extension Type: CodeableConcept)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            18. Basic.extension:manufacturer
            Slice Namemanufacturer
            Definition

            R4: MedicationKnowledge.manufacturer (new:Reference(Organization))

            ShortR4: Manufacturer of the item (new)
            Comments

            Element MedicationKnowledge.manufacturer is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.manufacturer has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

            Control0..1
            This element is affected by the following invariants: ele-1
            TypeExtension(R4: Manufacturer of the item (new)) (Extension Type: Reference(Cross-version Profile for R4.Organization for use in FHIR STU3, Organization))
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            20. Basic.extension:doseForm
            Slice NamedoseForm
            Definition

            R4: MedicationKnowledge.doseForm (new:CodeableConcept)

            ShortR4: powder | tablets | capsule + (new)
            Comments

            Element MedicationKnowledge.doseForm is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.doseForm has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). When Medication is referenced from MedicationRequest, this is the ordered form. When Medication is referenced within MedicationDispense, this is the dispensed form. When Medication is referenced within MedicationAdministration, this is administered form.

            Control0..1
            This element is affected by the following invariants: ele-1
            TypeExtension(R4: powder | tablets | capsule + (new)) (Extension Type: CodeableConcept)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            22. Basic.extension:amount
            Slice Nameamount
            Definition

            R4: MedicationKnowledge.amount (new:Quantity[SimpleQuantity])

            ShortR4: Amount of drug in package (new)
            Comments

            Element MedicationKnowledge.amount is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.amount has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). This is the quantity of medication in a package. To specify the strength of the medication, the Ingredient.strength attribute is used.

            Control0..1
            This element is affected by the following invariants: ele-1
            TypeExtension(R4: Amount of drug in package (new)) (Extension Type: Quantity(SimpleQuantity))
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            24. Basic.extension:synonym
            Slice Namesynonym
            Definition

            R4: MedicationKnowledge.synonym (new:string)

            ShortR4: Additional names for a medication (new)
            Comments

            Element MedicationKnowledge.synonym is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.synonym has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

            Control0..*
            This element is affected by the following invariants: ele-1
            TypeExtension(R4: Additional names for a medication (new)) (Extension Type: string)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            26. Basic.extension:relatedMedicationKnowledge
            Slice NamerelatedMedicationKnowledge
            Definition

            R4: MedicationKnowledge.relatedMedicationKnowledge (new:BackboneElement)

            ShortR4: Associated or related medication information (new)
            Comments

            Element MedicationKnowledge.relatedMedicationKnowledge is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.relatedMedicationKnowledge has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

            Control0..*
            This element is affected by the following invariants: ele-1
            TypeExtension(R4: Associated or related medication information (new)) (Complex Extension)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            28. Basic.extension:associatedMedication
            Slice NameassociatedMedication
            Definition

            R4: MedicationKnowledge.associatedMedication (new:Reference(Medication))

            ShortR4: A medication resource that is associated with this medication (new)
            Comments

            Element MedicationKnowledge.associatedMedication is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.associatedMedication has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

            Control0..*
            This element is affected by the following invariants: ele-1
            TypeExtension(R4: A medication resource that is associated with this medication (new)) (Extension Type: Reference(Cross-version Profile for R4.Medication for use in FHIR STU3, Medication))
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            30. Basic.extension:productType
            Slice NameproductType
            Definition

            R4: MedicationKnowledge.productType (new:CodeableConcept)

            ShortR4: Category of the medication or product (new)
            Comments

            Element MedicationKnowledge.productType is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.productType has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

            Control0..*
            This element is affected by the following invariants: ele-1
            TypeExtension(R4: Category of the medication or product (new)) (Extension Type: CodeableConcept)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            32. Basic.extension:monograph
            Slice Namemonograph
            Definition

            R4: MedicationKnowledge.monograph (new:BackboneElement)

            ShortR4: Associated documentation about the medication (new)
            Comments

            Element MedicationKnowledge.monograph is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.monograph has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

            Control0..*
            This element is affected by the following invariants: ele-1
            TypeExtension(R4: Associated documentation about the medication (new)) (Complex Extension)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            34. Basic.extension:ingredient
            Slice Nameingredient
            Definition

            R4: MedicationKnowledge.ingredient (new:BackboneElement)

            ShortR4: Active or inactive ingredient (new)
            Comments

            Element MedicationKnowledge.ingredient is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.ingredient has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

            Control0..*
            This element is affected by the following invariants: ele-1
            TypeExtension(R4: Active or inactive ingredient (new)) (Complex Extension)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            36. Basic.extension:preparationInstruction
            Slice NamepreparationInstruction
            Definition

            R4: MedicationKnowledge.preparationInstruction (new:markdown)

            ShortR4: The instructions for preparing the medication (new)
            Comments

            Element MedicationKnowledge.preparationInstruction is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.preparationInstruction has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

            Control0..1
            This element is affected by the following invariants: ele-1
            TypeExtension(R4: The instructions for preparing the medication (new)) (Extension Type: markdown)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            38. Basic.extension:intendedRoute
            Slice NameintendedRoute
            Definition

            R4: MedicationKnowledge.intendedRoute (new:CodeableConcept)

            ShortR4: The intended or approved route of administration (new)
            Comments

            Element MedicationKnowledge.intendedRoute is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.intendedRoute has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

            Control0..*
            This element is affected by the following invariants: ele-1
            TypeExtension(R4: The intended or approved route of administration (new)) (Extension Type: CodeableConcept)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            40. Basic.extension:cost
            Slice Namecost
            Definition

            R4: MedicationKnowledge.cost (new:BackboneElement)

            ShortR4: The pricing of the medication (new)
            Comments

            Element MedicationKnowledge.cost is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.cost has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

            Control0..*
            This element is affected by the following invariants: ele-1
            TypeExtension(R4: The pricing of the medication (new)) (Complex Extension)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            42. Basic.extension:monitoringProgram
            Slice NamemonitoringProgram
            Definition

            R4: MedicationKnowledge.monitoringProgram (new:BackboneElement)

            ShortR4: Program under which a medication is reviewed (new)
            Comments

            Element MedicationKnowledge.monitoringProgram is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.monitoringProgram has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

            Control0..*
            This element is affected by the following invariants: ele-1
            TypeExtension(R4: Program under which a medication is reviewed (new)) (Complex Extension)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            44. Basic.extension:administrationGuidelines
            Slice NameadministrationGuidelines
            Definition

            R4: MedicationKnowledge.administrationGuidelines (new:BackboneElement)

            ShortR4: Guidelines for administration of the medication (new)
            Comments

            Element MedicationKnowledge.administrationGuidelines is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.administrationGuidelines has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

            Control0..*
            This element is affected by the following invariants: ele-1
            TypeExtension(R4: Guidelines for administration of the medication (new)) (Complex Extension)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            46. Basic.extension:medicineClassification
            Slice NamemedicineClassification
            Definition

            R4: MedicationKnowledge.medicineClassification (new:BackboneElement)

            ShortR4: Categorization of the medication within a formulary or classification system (new)
            Comments

            Element MedicationKnowledge.medicineClassification is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.medicineClassification has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

            Control0..*
            This element is affected by the following invariants: ele-1
            TypeExtension(R4: Categorization of the medication within a formulary or classification system (new)) (Complex Extension)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            48. Basic.extension:packaging
            Slice Namepackaging
            Definition

            R4: MedicationKnowledge.packaging (new:BackboneElement)

            ShortR4: Details about packaged medications (new)
            Comments

            Element MedicationKnowledge.packaging is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.packaging has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

            Control0..1
            This element is affected by the following invariants: ele-1
            TypeExtension(R4: Details about packaged medications (new)) (Complex Extension)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            50. Basic.extension:drugCharacteristic
            Slice NamedrugCharacteristic
            Definition

            R4: MedicationKnowledge.drugCharacteristic (new:BackboneElement)

            ShortR4: Specifies descriptive properties of the medicine (new)
            Comments

            Element MedicationKnowledge.drugCharacteristic is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.drugCharacteristic has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

            Control0..*
            This element is affected by the following invariants: ele-1
            TypeExtension(R4: Specifies descriptive properties of the medicine (new)) (Complex Extension)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            52. Basic.extension:contraindication
            Slice Namecontraindication
            Definition

            R4: MedicationKnowledge.contraindication (new:Reference(DetectedIssue))

            ShortR4: Potential clinical issue with or between medication(s) (new)
            Comments

            Element MedicationKnowledge.contraindication is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.contraindication has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

            Control0..*
            This element is affected by the following invariants: ele-1
            TypeExtension(R4: Potential clinical issue with or between medication(s) (new)) (Extension Type: Reference(Cross-version Profile for R4.DetectedIssue for use in FHIR STU3, DetectedIssue))
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            54. Basic.extension:regulatory
            Slice Nameregulatory
            Definition

            R4: MedicationKnowledge.regulatory (new:BackboneElement)

            ShortR4: Regulatory information about a medication (new)
            Comments

            Element MedicationKnowledge.regulatory is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.regulatory has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

            Control0..*
            This element is affected by the following invariants: ele-1
            TypeExtension(R4: Regulatory information about a medication (new)) (Complex Extension)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            56. Basic.extension:kinetics
            Slice Namekinetics
            Definition

            R4: MedicationKnowledge.kinetics (new:BackboneElement)

            ShortR4: The time course of drug absorption, distribution, metabolism and excretion of a medication from the body (new)
            Comments

            Element MedicationKnowledge.kinetics is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.kinetics has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

            Control0..*
            This element is affected by the following invariants: ele-1
            TypeExtension(R4: The time course of drug absorption, distribution, metabolism and excretion of a medication from the body (new)) (Complex Extension)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            58. Basic.modifierExtension
            Definition

            An Extension

            ShortExtension
            Control0..*
            TypeExtension
            Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
            SlicingThis element introduces a set of slices on Basic.modifierExtension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • value @ url
            • 60. Basic.modifierExtension:status
              Slice Namestatus
              Definition

              R4: MedicationKnowledge.status (new:code)

              ShortR4: active | inactive | entered-in-error (new)
              Comments

              Element MedicationKnowledge.status is not mapped to FHIR STU3, since FHIR R4 MedicationKnowledge is not mapped. Element MedicationKnowledge.status has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R4 element MedicationKnowledge.status: http://hl7.org/fhir/StructureDefinition/artifact-status. This status is intended to identify if the medication in a local system is in active use within a drug database or inventory. For example, a pharmacy system may create a new drug file record for a compounded product "ABC Hospital Special Cream" with an active status. At some point in the future, it may be determined that the drug record was created with an error and the status is changed to "entered in error". This status is not intended to specify if a medication is part of a particular formulary. It is possible that the drug record may be referenced by multiple formularies or catalogues and each of those entries would have a separate status.

              Control0..1
              TypeExtension(http://hl7.org/fhir/StructureDefinition/artifact-status)
              Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
              62. Basic.identifier
              Definition

              Identifier assigned to the resource for business purposes, outside the context of FHIR.

              ShortBusiness identifier
              NoteThis is a business identifier, not a resource identifier (see discussion)
              Control0..*
              TypeIdentifier
              Summarytrue
              64. Basic.code
              Definition

              Identifies the 'type' of resource - equivalent to the resource name for other resources.

              ShortKind of Resource
              Comments

              Because resource references will only be able to indicate 'Basic', the type of reference will need to be specified in a Profile identified as part of the resource. Refer to the resource notes section for information on appropriate terminologies for this code.

              This element is labeled as a modifier because the it defines the meaning of the resource and cannot be ignored.

              Control1..1
              BindingFor example codes, see Basic Resource Types
              (example to http://hl7.org/fhir/ValueSet/basic-resource-type|3.0.2)

              Codes for identifying types of resources not yet defined by FHIR

              TypeCodeableConcept
              Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
              Summarytrue
              Requirements

              Must be able to distinguish different types of Basic resources.

              66. Basic.subject
              Definition

              Identifies the patient, practitioner, device or any other resource that is the "focus" of this resource.

              ShortIdentifies the focus of this resource
              Comments

              Optional as not all potential resources will have subjects. Resources associated with multiple subjects can handle this via extension.

              Control0..1
              TypeReference(Resource)
              Summarytrue
              Requirements

              Needed for partitioning the resource by Patient.

              68. Basic.created
              Definition

              Identifies when the resource was first created.

              ShortWhen created
              Control0..1
              Typedate
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Requirements

              Allows ordering resource instances by time.

              70. Basic.author
              Definition

              Indicates who was responsible for creating the resource instance.

              ShortWho created
              Control0..1
              TypeReference(Practitioner, Patient, RelatedPerson)
              Summarytrue
              Requirements

              Needed for partitioning the resource.