Extensions for Using Data Elements from FHIR R4 in FHIR STU3
0.1.0 - STU International flag

Extensions for Using Data Elements from FHIR R4 in FHIR STU3 - Downloaded Version null See the Directory of published versions

Resource Profile: Profile_R4_Coverage_R3 - Detailed Descriptions

Page standards status: Trial-use Maturity Level: 0

Definitions for the profile-Coverage resource profile.

Guidance on how to interpret the contents of this table can be foundhere

0. Coverage
Definition

Financial instrument which may be used to reimburse or pay for health care products and services.

ShortInsurance or medical plan or a payment agreement
Control0..*
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-1: If the resource is contained in another resource, it SHALL NOT contain any narrative (contained.text.empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource (contained.where(('#'+id in %resource.descendants().reference).not()).empty())
dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-1: If the resource is contained in another resource, it SHALL NOT contain any narrative (contained.text.empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource (contained.where(('#'+id in %resource.descendants().reference).not()).empty())
2. Coverage.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element.

This element is labelled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation.

Control0..1
Typeuri
Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
4. Coverage.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the resource. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional Content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Alternate Namesextensions, user content
SlicingThis element introduces a set of slices on Coverage.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 6. Coverage.extension:costToBeneficiary
    Slice NamecostToBeneficiary
    Definition

    R4: Coverage.costToBeneficiary (new:BackboneElement)

    ShortR4: Patient payments for services/products (new)
    Comments

    Element Coverage.costToBeneficiary has a context of Coverage based on following the parent source element upwards and mapping to Coverage. Element Coverage.costToBeneficiary has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). For example by knowing the patient visit co-pay, the provider can collect the amount prior to undertaking treatment.

    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension(R4: Patient payments for services/products (new)) (Complex Extension)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    8. Coverage.extension:subrogation
    Slice Namesubrogation
    Definition

    R4: Coverage.subrogation (new:boolean)

    ShortR4: Reimbursement to insurer (new)
    Comments

    Element Coverage.subrogation has a context of Coverage based on following the parent source element upwards and mapping to Coverage. Element Coverage.subrogation has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Typically, automotive and worker's compensation policies would be flagged with 'subrogation=true' to enable healthcare payors to collect against accident claims.

    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(R4: Reimbursement to insurer (new)) (Extension Type: boolean)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    10. Coverage.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the resource, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    ShortExtensions that cannot be ignored
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
    Alternate Namesextensions, user content
    12. Coverage.status
    Definition

    The status of the resource instance.

    Shortactive | cancelled | draft | entered-in-error
    Comments

    This element is labeled as a modifier because the status contains the code entered-in-error that marks the coverage as not currently valid.

    Control0..1
    BindingThe codes SHALL be taken from Financial Resource Status Codeshttp://hl7.org/fhir/ValueSet/fm-status|3.0.2
    (required to http://hl7.org/fhir/ValueSet/fm-status|3.0.2)

    A code specifying the state of the resource instance.

    Typecode
    Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue

    Guidance on how to interpret the contents of this table can be foundhere

    0. Coverage
    2. Coverage.extension
    Control0..*
    SlicingThis element introduces a set of slices on Coverage.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • 4. Coverage.extension:costToBeneficiary
      Slice NamecostToBeneficiary
      Definition

      R4: Coverage.costToBeneficiary (new:BackboneElement)

      ShortR4: Patient payments for services/products (new)
      Comments

      Element Coverage.costToBeneficiary has a context of Coverage based on following the parent source element upwards and mapping to Coverage. Element Coverage.costToBeneficiary has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). For example by knowing the patient visit co-pay, the provider can collect the amount prior to undertaking treatment.

      Control0..*
      TypeExtension(R4: Patient payments for services/products (new)) (Complex Extension)
      6. Coverage.extension:subrogation
      Slice Namesubrogation
      Definition

      R4: Coverage.subrogation (new:boolean)

      ShortR4: Reimbursement to insurer (new)
      Comments

      Element Coverage.subrogation has a context of Coverage based on following the parent source element upwards and mapping to Coverage. Element Coverage.subrogation has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Typically, automotive and worker's compensation policies would be flagged with 'subrogation=true' to enable healthcare payors to collect against accident claims.

      Control0..1
      TypeExtension(R4: Reimbursement to insurer (new)) (Extension Type: boolean)

      Guidance on how to interpret the contents of this table can be foundhere

      0. Coverage
      Definition

      Financial instrument which may be used to reimburse or pay for health care products and services.

      ShortInsurance or medical plan or a payment agreement
      Control0..*
      Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
      dom-1: If the resource is contained in another resource, it SHALL NOT contain any narrative (contained.text.empty())
      dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
      dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource (contained.where(('#'+id in %resource.descendants().reference).not()).empty())
      2. Coverage.id
      Definition

      The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

      ShortLogical id of this artifact
      Comments

      The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

      Control0..1
      Typeid
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      4. Coverage.meta
      Definition

      The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content may not always be associated with version changes to the resource.

      ShortMetadata about the resource
      Control0..1
      TypeMeta
      Summarytrue
      6. Coverage.implicitRules
      Definition

      A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content.

      ShortA set of rules under which this content was created
      Comments

      Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element.

      This element is labelled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation.

      Control0..1
      Typeuri
      Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      8. Coverage.language
      Definition

      The base language in which the resource is written.

      ShortLanguage of the resource content
      Comments

      Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

      Control0..1
      BindingUnless not suitable, these codes SHALL be taken from Common Languages
      (extensible to http://hl7.org/fhir/ValueSet/languages|3.0.2)

      A human language.

      Additional BindingsPurpose
      All LanguagesMax Binding
      Typecode
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      10. Coverage.text
      Definition

      A human-readable narrative that contains a summary of the resource, and may be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

      ShortText summary of the resource, for human interpretation
      Comments

      Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded in formation is added later.

      Control0..1
      This element is affected by the following invariants: dom-1
      TypeNarrative
      Alternate Namesnarrative, html, xhtml, display
      12. Coverage.contained
      Definition

      These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

      ShortContained, inline Resources
      Comments

      This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again.

      Control0..*
      TypeResource
      Alternate Namesinline resources, anonymous resources, contained resources
      14. Coverage.extension
      Definition

      An Extension

      ShortExtension
      Control0..*
      TypeExtension
      SlicingThis element introduces a set of slices on Coverage.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 16. Coverage.extension:costToBeneficiary
        Slice NamecostToBeneficiary
        Definition

        R4: Coverage.costToBeneficiary (new:BackboneElement)

        ShortR4: Patient payments for services/products (new)
        Comments

        Element Coverage.costToBeneficiary has a context of Coverage based on following the parent source element upwards and mapping to Coverage. Element Coverage.costToBeneficiary has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). For example by knowing the patient visit co-pay, the provider can collect the amount prior to undertaking treatment.

        Control0..*
        This element is affected by the following invariants: ele-1
        TypeExtension(R4: Patient payments for services/products (new)) (Complex Extension)
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        18. Coverage.extension:subrogation
        Slice Namesubrogation
        Definition

        R4: Coverage.subrogation (new:boolean)

        ShortR4: Reimbursement to insurer (new)
        Comments

        Element Coverage.subrogation has a context of Coverage based on following the parent source element upwards and mapping to Coverage. Element Coverage.subrogation has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Typically, automotive and worker's compensation policies would be flagged with 'subrogation=true' to enable healthcare payors to collect against accident claims.

        Control0..1
        This element is affected by the following invariants: ele-1
        TypeExtension(R4: Reimbursement to insurer (new)) (Extension Type: boolean)
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        20. Coverage.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the resource, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        ShortExtensions that cannot be ignored
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
        Alternate Namesextensions, user content
        22. Coverage.identifier
        Definition

        The main (and possibly only) identifier for the coverage - often referred to as a Member Id, Certificate number, Personal Health Number or Case ID. May be constructed as the concatination of the Coverage.SubscriberID and the Coverage.dependant.

        ShortThe primary coverage ID
        NoteThis is a business identifier, not a resource identifier (see discussion)
        Control0..*
        TypeIdentifier
        Summarytrue
        Requirements

        This value may uniquely identify the coverage or it may be used in conjunction with the additional identifiers below.

        24. Coverage.status
        Definition

        The status of the resource instance.

        Shortactive | cancelled | draft | entered-in-error
        Comments

        This element is labeled as a modifier because the status contains the code entered-in-error that marks the coverage as not currently valid.

        Control0..1
        BindingThe codes SHALL be taken from Financial Resource Status Codes
        (required to http://hl7.org/fhir/ValueSet/fm-status|3.0.2)

        A code specifying the state of the resource instance.

        Typecode
        Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        26. Coverage.type
        Definition

        The type of coverage: social program, medical plan, accident coverage (workers compensation, auto), group health or payment by an individual or organization.

        ShortType of coverage such as medical or accident
        Control0..1
        BindingThe codes SHOULD be taken from Coverage Type and Self-Pay Codes
        (preferred to http://hl7.org/fhir/ValueSet/coverage-type|3.0.2)

        The type of insurance: public health, worker compensation; private accident, auto, private health, etc.) or a direct payment by an individual or organization.

        TypeCodeableConcept
        Summarytrue
        Requirements

        The order of application of coverages is dependent on the types of coverage.

        28. Coverage.policyHolder
        Definition

        The party who 'owns' the insurance policy, may be an individual, corporation or the subscriber's employer.

        ShortOwner of the policy
        Control0..1
        TypeReference(Patient, RelatedPerson, Organization)
        Summarytrue
        30. Coverage.subscriber
        Definition

        The party who has signed-up for or 'owns' the contractual relationship to the policy or to whom the benefit of the policy for services rendered to them or their family is due.

        ShortSubscriber to the policy
        Control0..1
        TypeReference(Patient, RelatedPerson)
        Summarytrue
        32. Coverage.subscriberId
        Definition

        The insurer assigned ID for the Subscriber.

        ShortID assigned to the Subscriber
        Control0..1
        Typestring
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        34. Coverage.beneficiary
        Definition

        The party who benefits from the insurance coverage., the patient when services are provided.

        ShortPlan Beneficiary
        Control0..1
        TypeReference(Patient)
        Summarytrue
        36. Coverage.relationship
        Definition

        The relationship of beneficiary (patient) to the subscriber.

        ShortBeneficiary relationship to the Subscriber
        Control0..1
        BindingFor example codes, see Policyholder Relationship Codes
        (example to http://hl7.org/fhir/ValueSet/policyholder-relationship|3.0.2)

        The relationship between the Policyholder and the Beneficiary (insured/covered party/patient).

        TypeCodeableConcept
        Requirements

        To determine relationship between the patient and the subscriber.

        38. Coverage.period
        Definition

        Time period during which the coverage is in force. A missing start date indicates the start date isn't known, a missing end date means the coverage is continuing to be in force.

        ShortCoverage start and end dates
        Control0..1
        TypePeriod
        Summarytrue
        40. Coverage.payor
        Definition

        The program or plan underwriter or payor including both insurance and non-insurance agreements, such as patient-pay agreements. May provide multiple identifiers such as insurance company identifier or business identifier (BIN number).

        ShortIdentifier for the plan or agreement issuer
        Control0..*
        TypeReference(Organization, Patient, RelatedPerson)
        Summarytrue
        Requirements

        Need to identify the issuer to target for processing and for coordination of benefit processing.

        42. Coverage.grouping
        Definition

        A suite of underwrite specific classifiers, for example may be used to identify a class of coverage or employer group, Policy, Plan.

        ShortAdditional coverage classifications
        Control0..1
        TypeBackboneElement
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
        44. Coverage.grouping.id
        Definition

        unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        Shortxml:id (or equivalent in JSON)
        Control0..1
        Typestring
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        XML FormatIn the XML format, this property is represented as an attribute.
        46. Coverage.grouping.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional Content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Alternate Namesextensions, user content
        48. Coverage.grouping.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        ShortExtensions that cannot be ignored
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
        Summarytrue
        Alternate Namesextensions, user content, modifiers
        50. Coverage.grouping.group
        Definition

        Identifies a style or collective of coverage issued by the underwriter, for example may be used to identify an employer group. May also be referred to as a Policy or Group ID.

        ShortAn identifier for the group
        Control0..1
        Typestring
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        52. Coverage.grouping.groupDisplay
        Definition

        A short description for the group.

        ShortDisplay text for an identifier for the group
        Control0..1
        Typestring
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        54. Coverage.grouping.subGroup
        Definition

        Identifies a style or collective of coverage issued by the underwriter, for example may be used to identify a subset of an employer group.

        ShortAn identifier for the subsection of the group
        Control0..1
        Typestring
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        56. Coverage.grouping.subGroupDisplay
        Definition

        A short description for the subgroup.

        ShortDisplay text for the subsection of the group
        Control0..1
        Typestring
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        58. Coverage.grouping.plan
        Definition

        Identifies a style or collective of coverage issued by the underwriter, for example may be used to identify a collection of benefits provided to employees. May be referred to as a Section or Division ID.

        ShortAn identifier for the plan
        Control0..1
        Typestring
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        60. Coverage.grouping.planDisplay
        Definition

        A short description for the plan.

        ShortDisplay text for the plan
        Control0..1
        Typestring
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        62. Coverage.grouping.subPlan
        Definition

        Identifies a sub-style or sub-collective of coverage issued by the underwriter, for example may be used to identify a subset of a collection of benefits provided to employees.

        ShortAn identifier for the subsection of the plan
        Control0..1
        Typestring
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        64. Coverage.grouping.subPlanDisplay
        Definition

        A short description for the subplan.

        ShortDisplay text for the subsection of the plan
        Control0..1
        Typestring
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        66. Coverage.grouping.class
        Definition

        Identifies a style or collective of coverage issues by the underwriter, for example may be used to identify a class of coverage such as a level of deductables or co-payment.

        ShortAn identifier for the class
        Control0..1
        Typestring
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        68. Coverage.grouping.classDisplay
        Definition

        A short description for the class.

        ShortDisplay text for the class
        Control0..1
        Typestring
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        70. Coverage.grouping.subClass
        Definition

        Identifies a sub-style or sub-collective of coverage issues by the underwriter, for example may be used to identify a subclass of coverage such as a sub-level of deductables or co-payment.

        ShortAn identifier for the subsection of the class
        Control0..1
        Typestring
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        72. Coverage.grouping.subClassDisplay
        Definition

        A short description for the subclass.

        ShortDisplay text for the subsection of the subclass
        Control0..1
        Typestring
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        74. Coverage.dependent
        Definition

        A unique identifier for a dependent under the coverage.

        ShortDependent number
        Control0..1
        Typestring
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        For some coverage a single identifier is issued to the Subscriber and a dependent number issued to each beneficiary.

        76. Coverage.sequence
        Definition

        An optional counter for a particular instance of the identified coverage which increments upon each renewal.

        ShortThe plan instance or sequence counter
        Control0..1
        Typestring
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        Some coverage, for example social plans, may be offered in short time increments, for example for a week or a month at a time, so while the rest of the plan details and identifiers may remain constant over time, the instance is incremented with each renewal and provided to the covered party on their 'card'.

        78. Coverage.order
        Definition

        The order of applicability of this coverage relative to other coverages which are currently inforce. Note, there may be gaps in the numbering and this does not imply primary, secondard etc. as the specific positioning of coverages depends upon the episode of care.

        ShortRelative order of the coverage
        Control0..1
        TypepositiveInt
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        80. Coverage.network
        Definition

        The insurer-specific identifier for the insurer-defined network of providers to which the beneficiary may seek treatment which will be covered at the 'in-network' rate, otherwise 'out of network' terms and conditions apply.

        ShortInsurer network
        Control0..1
        Typestring
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        82. Coverage.contract
        Definition

        The policy(s) which constitute this insurance coverage.

        ShortContract details
        Control0..*
        TypeReference(Contract)