Extensions for Using Data Elements from FHIR R4 in FHIR STU3
0.1.0 - STU International flag

Extensions for Using Data Elements from FHIR R4 in FHIR STU3 - Downloaded Version null See the Directory of published versions

Resource Profile: Profile_R4_Bundle_R3 - Detailed Descriptions

Page standards status: Trial-use Maturity Level: 0

Definitions for the profile-Bundle resource profile.

Guidance on how to interpret the contents of this table can be foundhere

0. Bundle
Definition

A container for a collection of resources.

ShortContains a collection of resources
Control0..*
Invariantsbdl-7: FullUrl must be unique in a bundle, or else entries with the same fullUrl must have different meta.versionId (entry.where(fullUrl).select(fullUrl&resource.meta.versionId).isDistinct())
bdl-9: A document must have an identifier with a system and a value (type = 'document' implies (identifier.system.exists() and identifier.value.exists()))
bdl-3: entry.request only for some types of bundles (entry.request.empty() or type = 'batch' or type = 'transaction' or type = 'history')
bdl-4: entry.response only for some types of bundles (entry.response.empty() or type = 'batch-response' or type = 'transaction-response')
bdl-1: total only when a search or history (total.empty() or (type = 'searchset') or (type = 'history'))
bdl-2: entry.search only when a search (entry.search.empty() or (type = 'searchset'))
bdl-7: FullUrl must be unique in a bundle, or else entries with the same fullUrl must have different meta.versionId (entry.where(fullUrl).select(fullUrl&resource.meta.versionId).isDistinct())
bdl-9: A document must have an identifier with a system and a value (type = 'document' implies (identifier.system.exists() and identifier.value.exists()))
bdl-3: entry.request only for some types of bundles (entry.request.empty() or type = 'batch' or type = 'transaction' or type = 'history')
bdl-4: entry.response only for some types of bundles (entry.response.empty() or type = 'batch-response' or type = 'transaction-response')
bdl-1: total only when a search or history (total.empty() or (type = 'searchset') or (type = 'history'))
bdl-2: entry.search only when a search (entry.search.empty() or (type = 'searchset'))
2. Bundle.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element.

This element is labelled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation.

Control0..1
Typeuri
Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
4. Bundle.type
Definition

Indicates the purpose of this bundle - how it was intended to be used.

Shortdocument | message | transaction | transaction-response | batch | batch-response | history | searchset | collection
Comments

It's possible to use a bundle for other purposes (e.g. a document can be accepted as a transaction). This is primarily defined so that there can be specific rules for some of the bundle types.

Control1..1
BindingThe codes SHALL be taken from BundleTypehttp://hl7.org/fhir/ValueSet/bundle-type|3.0.2
(required to http://hl7.org/fhir/ValueSet/bundle-type|3.0.2)

Indicates the purpose of a bundle - how it was intended to be used.

Typecode
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue

Guidance on how to interpret the contents of this table can be foundhere

0. Bundle
2. Bundle.extension
Control0..*
SlicingThis element introduces a set of slices on Bundle.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 4. Bundle.extension:timestamp
    Slice Nametimestamp
    Definition

    R4: Bundle.timestamp (new:instant)

    ShortR4: When the bundle was assembled (new)
    Comments

    Element Bundle.timestamp has a context of Bundle based on following the parent source element upwards and mapping to Bundle. Element Bundle.timestamp has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). For many bundles, the timestamp is equal to .meta.lastUpdated, because they are not stored (e.g. search results). When a bundle is placed in a persistent store, .meta.lastUpdated will be usually be changed by the server. When the bundle is a message, a middleware agent altering the message (even if not stored) SHOULD update .meta.lastUpdated. .timestamp is used to track the original time of the Bundle, and SHOULD be populated.

    Usage:

    • document : the date the document was created. Note: the composition may predate the document, or be associated with multiple documents. The date of the composition - the authoring time - may be earlier than the document assembly time
    • message : the date that the content of the message was assembled. This date is not changed by middleware engines unless they add additional data that changes the meaning of the time of the message
    • history : the date that the history was assembled. This time would be used as the _since time to ask for subsequent updates
    • searchset : the time that the search set was assembled. Note that different pages MAY have different timestamps but need not. Having different timestamps does not imply that subsequent pages will represent or include changes made since the initial query
    • transaction | transaction-response | batch | batch-response | collection : no particular assigned meaning

    The timestamp value should be greater than the lastUpdated and other timestamps in the resources in the bundle, and it should be equal or earlier than the .meta.lastUpdated on the Bundle itself.

    Control0..1
    TypeExtension(R4: When the bundle was assembled (new)) (Extension Type: instant)
    6. Bundle.entry
    8. Bundle.entry.request
    10. Bundle.entry.request.method
    12. Bundle.entry.request.method.extension
    Control0..*
    SlicingThis element introduces a set of slices on Bundle.entry.request.method.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • 14. Bundle.entry.request.method.extension:method
      Slice Namemethod
      Definition

      R4: Bundle.entry.request.method

      ShortR4: GET | HEAD | POST | PUT | DELETE | PATCH
      Comments

      Element Bundle.entry.request.method is mapped to FHIR STU3 element Bundle.entry.request.method as SourceIsBroaderThanTarget.

      Control0..1
      TypeExtension(R4: GET | HEAD | POST | PUT | DELETE | PATCH) (Extension Type: code)

      Guidance on how to interpret the contents of this table can be foundhere

      0. Bundle
      Definition

      A container for a collection of resources.

      ShortContains a collection of resources
      Control0..*
      Invariantsbdl-7: FullUrl must be unique in a bundle, or else entries with the same fullUrl must have different meta.versionId (entry.where(fullUrl).select(fullUrl&resource.meta.versionId).isDistinct())
      bdl-9: A document must have an identifier with a system and a value (type = 'document' implies (identifier.system.exists() and identifier.value.exists()))
      bdl-3: entry.request only for some types of bundles (entry.request.empty() or type = 'batch' or type = 'transaction' or type = 'history')
      bdl-4: entry.response only for some types of bundles (entry.response.empty() or type = 'batch-response' or type = 'transaction-response')
      bdl-1: total only when a search or history (total.empty() or (type = 'searchset') or (type = 'history'))
      bdl-2: entry.search only when a search (entry.search.empty() or (type = 'searchset'))
      2. Bundle.id
      Definition

      The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

      ShortLogical id of this artifact
      Comments

      The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

      Control0..1
      Typeid
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      4. Bundle.meta
      Definition

      The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content may not always be associated with version changes to the resource.

      ShortMetadata about the resource
      Control0..1
      TypeMeta
      Summarytrue
      6. Bundle.implicitRules
      Definition

      A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content.

      ShortA set of rules under which this content was created
      Comments

      Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element.

      This element is labelled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation.

      Control0..1
      Typeuri
      Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      8. Bundle.language
      Definition

      The base language in which the resource is written.

      ShortLanguage of the resource content
      Comments

      Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

      Control0..1
      BindingUnless not suitable, these codes SHALL be taken from Common Languages
      (extensible to http://hl7.org/fhir/ValueSet/languages|3.0.2)

      A human language.

      Additional BindingsPurpose
      All LanguagesMax Binding
      Typecode
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      10. Bundle.identifier
      Definition

      A persistent identifier for the batch that won't change as a batch is copied from server to server.

      ShortPersistent identifier for the bundle
      Comments

      Persistent identity generally only matters for batches of type Document, Message, and Collection. It would not normally be populated for search and history results, and servers ignore Bundle.identifier when processing batches and transactions. For Documents the .identifier SHALL be populated such that the .identifier is globally unique.

      NoteThis is a business identifier, not a resource identifier (see discussion)
      Control0..1
      TypeIdentifier
      Summarytrue
      12. Bundle.type
      Definition

      Indicates the purpose of this bundle - how it was intended to be used.

      Shortdocument | message | transaction | transaction-response | batch | batch-response | history | searchset | collection
      Comments

      It's possible to use a bundle for other purposes (e.g. a document can be accepted as a transaction). This is primarily defined so that there can be specific rules for some of the bundle types.

      Control1..1
      BindingThe codes SHALL be taken from BundleType
      (required to http://hl7.org/fhir/ValueSet/bundle-type|3.0.2)

      Indicates the purpose of a bundle - how it was intended to be used.

      Typecode
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      14. Bundle.total
      Definition

      If a set of search matches, this is the total number of matches for the search (as opposed to the number of results in this bundle).

      ShortIf search, the total number of matches
      Comments

      Only used if the bundle is a search result set. The total does not include resources such as OperationOutcome and included resources, only the total number of matching resources.

      Control0..1
      This element is affected by the following invariants: bdl-1
      TypeunsignedInt
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      16. Bundle.link
      Definition

      A series of links that provide context to this bundle.

      ShortLinks related to this Bundle
      Control0..*
      TypeBackboneElement
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
      18. Bundle.link.id
      Definition

      unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

      Shortxml:id (or equivalent in JSON)
      Control0..1
      Typestring
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      XML FormatIn the XML format, this property is represented as an attribute.
      20. Bundle.link.extension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortAdditional Content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Alternate Namesextensions, user content
      22. Bundle.link.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      ShortExtensions that cannot be ignored
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
      Summarytrue
      Alternate Namesextensions, user content, modifiers
      24. Bundle.link.relation
      Definition

      A name which details the functional use for this link - see http://www.iana.org/assignments/link-relations/link-relations.xhtml#link-relations-1.

      ShortSee http://www.iana.org/assignments/link-relations/link-relations.xhtml#link-relations-1
      Control1..1
      Typestring
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      26. Bundle.link.url
      Definition

      The reference details for the link.

      ShortReference details for the link
      Control1..1
      Typeuri
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      28. Bundle.entry
      Definition

      An entry in a bundle resource - will either contain a resource, or information about a resource (transactions and history only).

      ShortEntry in the bundle - will have a resource, or information
      Control0..*
      TypeBackboneElement
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      30. Bundle.entry.id
      Definition

      unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

      Shortxml:id (or equivalent in JSON)
      Control0..1
      Typestring
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      XML FormatIn the XML format, this property is represented as an attribute.
      32. Bundle.entry.extension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortAdditional Content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Alternate Namesextensions, user content
      34. Bundle.entry.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      ShortExtensions that cannot be ignored
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
      Summarytrue
      Alternate Namesextensions, user content, modifiers
      36. Bundle.entry.link
      Definition

      A series of links that provide context to this entry.

      ShortLinks related to this entry
      Control0..*
      TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
      Summarytrue
      38. Bundle.entry.fullUrl
      Definition

      The Absolute URL for the resource. The fullUrl SHALL not disagree with the id in the resource. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that: * fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle) * Results from operations might involve resources that are not identified.

      ShortAbsolute URL for resource (server address, or UUID/OID)
      Comments

      fullUrl may not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the absolute URL may not end with the logical id of the resource (Resource.id), but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then it SHALL end with the Resource.id.

      Control0..1
      Typeuri
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      40. Bundle.entry.resource
      Definition

      The Resources for the entry.

      ShortA resource in the bundle
      Control0..1
      TypeResource
      Summarytrue
      42. Bundle.entry.search
      Definition

      Information about the search process that lead to the creation of this entry.

      ShortSearch related information
      Control0..1
      This element is affected by the following invariants: bdl-2
      TypeBackboneElement
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
      44. Bundle.entry.search.id
      Definition

      unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

      Shortxml:id (or equivalent in JSON)
      Control0..1
      Typestring
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      XML FormatIn the XML format, this property is represented as an attribute.
      46. Bundle.entry.search.extension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortAdditional Content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Alternate Namesextensions, user content
      48. Bundle.entry.search.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      ShortExtensions that cannot be ignored
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
      Summarytrue
      Alternate Namesextensions, user content, modifiers
      50. Bundle.entry.search.mode
      Definition

      Why this entry is in the result set - whether it's included as a match or because of an _include requirement.

      Shortmatch | include | outcome - why this is in the result set
      Comments

      There is only one mode. In some corner cases, a resource may be included because it is both a match and an include. In these circumstances, 'match' takes precedence.

      Control0..1
      BindingThe codes SHALL be taken from SearchEntryMode
      (required to http://hl7.org/fhir/ValueSet/search-entry-mode|3.0.2)

      Why an entry is in the result set - whether it's included as a match or because of an _include requirement.

      Typecode
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      52. Bundle.entry.search.score
      Definition

      When searching, the server's search ranking score for the entry.

      ShortSearch ranking (between 0 and 1)
      Comments

      Servers are not required to return a ranking score. 1 is most relevant, and 0 is least relevant. Often, search results are sorted by score, but the client may specify a different sort order.

      Control0..1
      Typedecimal
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      54. Bundle.entry.request
      Definition

      Additional information about how this entry should be processed as part of a transaction.

      ShortTransaction Related Information
      Control0..1
      This element is affected by the following invariants: bdl-3
      TypeBackboneElement
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
      56. Bundle.entry.request.id
      Definition

      unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

      Shortxml:id (or equivalent in JSON)
      Control0..1
      Typestring
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      XML FormatIn the XML format, this property is represented as an attribute.
      58. Bundle.entry.request.extension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortAdditional Content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Alternate Namesextensions, user content
      60. Bundle.entry.request.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      ShortExtensions that cannot be ignored
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
      Summarytrue
      Alternate Namesextensions, user content, modifiers
      62. Bundle.entry.request.method
      Definition

      The HTTP verb for this entry in either a change history, or a transaction/ transaction response.

      ShortGET | POST | PUT | DELETE
      Control1..1
      BindingThe codes SHALL be taken from HTTPVerb .
      (required to http://hl7.org/fhir/ValueSet/http-verb|3.0.2)

      HTTP verbs (in the HTTP command line).

      Typecode
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      64. Bundle.entry.request.url
      Definition

      The URL for this entry, relative to the root (the address to which the request is posted).

      ShortURL for HTTP equivalent of this entry
      Comments

      E.g. for a Patient Create, the method would be "POST" and the URL would be "Patient". For a Patient Update, the method would be PUT, and the URL would be "Patient/[id]".

      Control1..1
      Typeuri
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      66. Bundle.entry.request.ifNoneMatch
      Definition

      If the ETag values match, return a 304 Not Modified status. See the API documentation for "Conditional Read".

      ShortFor managing cache currency
      Control0..1
      Typestring
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      68. Bundle.entry.request.ifModifiedSince
      Definition

      Only perform the operation if the last updated date matches. See the API documentation for "Conditional Read".

      ShortFor managing update contention
      Control0..1
      Typeinstant
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      70. Bundle.entry.request.ifMatch
      Definition

      Only perform the operation if the Etag value matches. For more information, see the API section "Managing Resource Contention".

      ShortFor managing update contention
      Control0..1
      Typestring
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      72. Bundle.entry.request.ifNoneExist
      Definition

      Instruct the server not to perform the create if a specified resource already exists. For further information, see the API documentation for "Conditional Create". This is just the query portion of the URL - what follows the "?" (not including the "?").

      ShortFor conditional creates
      Control0..1
      Typestring
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      74. Bundle.entry.response
      Definition

      Additional information about how this entry should be processed as part of a transaction.

      ShortTransaction Related Information
      Control0..1
      This element is affected by the following invariants: bdl-4
      TypeBackboneElement
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
      76. Bundle.entry.response.id
      Definition

      unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

      Shortxml:id (or equivalent in JSON)
      Control0..1
      Typestring
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      XML FormatIn the XML format, this property is represented as an attribute.
      78. Bundle.entry.response.extension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortAdditional Content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Alternate Namesextensions, user content
      80. Bundle.entry.response.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      ShortExtensions that cannot be ignored
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
      Summarytrue
      Alternate Namesextensions, user content, modifiers
      82. Bundle.entry.response.status
      Definition

      The status code returned by processing this entry. The status SHALL start with a 3 digit HTTP code (e.g. 404) and may contain the standard HTTP description associated with the status code.

      ShortStatus response code (text optional)
      Control1..1
      Typestring
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      84. Bundle.entry.response.location
      Definition

      The location header created by processing this operation.

      ShortThe location, if the operation returns a location
      Control0..1
      Typeuri
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      86. Bundle.entry.response.etag
      Definition

      The etag for the resource, it the operation for the entry produced a versioned resource (see Resource Metadata and Versioning and Managing Resource Contention).

      ShortThe etag for the resource (if relevant)
      Comments

      Etags match the Resource.meta.versionId. The ETag has to match the version id in the header if a resource is included.

      Control0..1
      Typestring
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      88. Bundle.entry.response.lastModified
      Definition

      The date/time that the resource was modified on the server.

      ShortServer's date time modified
      Comments

      This has to match the same time in the meta header if a resource is included.

      Control0..1
      Typeinstant
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      90. Bundle.entry.response.outcome
      Definition

      An OperationOutcome containing hints and warnings produced as part of processing this entry in a batch or transaction.

      ShortOperationOutcome with hints and warnings (for batch/transaction)
      Comments

      For a POST/PUT operation, this is the equivalent outcome that would be returned for prefer = operationoutcome - except that the resource is always returned whether or not the outcome is returned.

      Control0..1
      TypeResource
      Summarytrue
      92. Bundle.signature
      Definition

      Digital Signature - base64 encoded. XML-DSIg or a JWT.

      ShortDigital Signature
      Comments

      The signature could be created by the "author" of the bundle or by the originating device. Requirements around inclusion of a signature, verification of signatures and treatment of signed/non-signed bundles is implementation-environment specific.

      Control0..1
      TypeSignature
      Summarytrue
      Requirements

      This element allows capturing signatures on documents. It also allows signatures on messages, transactions or even query responses. It may support content-authentication, non-repudiation or other business cases. This is primarily relevant where the bundle may travel through multiple hops or via other mechanisms where HTTPS non-repudiation is insufficient.