ExtensionSubstancePolymer_Repeat - Definitions - Extensions for Using Data Elements from FHIR R4 in FHIR STU3 v0.1.0

Extensions for Using Data Elements from FHIR R4 in FHIR STU3 - Downloaded Version null See the Directory of published versions

Extension: ExtensionSubstancePolymer_Repeat - Detailed Descriptions

Page standards status: Trial-use

Maturity Level: 0

Definitions for the ext-R4-SubstancePolymer.repeat extension.

Key Elements Table
Differential Elements Table
Snapshot Elements Table

Guidance on how to interpret the contents of this table can be foundhere

0. Extension
Definition	R4: `SubstancePolymer.repeat` (new:BackboneElement) Optional Extension Element - found in all resources.
Short	R4: Todo (new)Optional Extensions Element
Comments	Element `SubstancePolymer.repeat` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..* This element is affected by the following invariants: ele-1
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() \| (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
2. Extension.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
4. Extension.extension:numberOfUnits
Slice Name	numberOfUnits
Definition	R4: `SubstancePolymer.repeat.numberOfUnits` (new:integer)
Short	R4: Todo (new)Additional Content defined by implementations
Comments	Element `SubstancePolymer.repeat.numberOfUnits` is part of an existing definition because parent element `SubstancePolymer.repeat` requires a cross-version extension. Element `SubstancePolymer.repeat.numberOfUnits` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.numberOfUnits` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1*
Type	Extension
Requirements	Element `SubstancePolymer.repeat.numberOfUnits` is part of an existing definition because parent element `SubstancePolymer.repeat` requires a cross-version extension. Element `SubstancePolymer.repeat.numberOfUnits` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.numberOfUnits` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
6. Extension.extension:numberOfUnits.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`numberOfUnits`
8. Extension.extension:numberOfUnits.value[x]
Definition	Todo. Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	TodoValue of extension
Control	0..1
Type	integer, date, dateTime, Meta, code, string, Address, Attachment, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Quantity, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal, CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
10. Extension.extension:averageMolecularFormula
Slice Name	averageMolecularFormula
Definition	R4: `SubstancePolymer.repeat.averageMolecularFormula` (new:string)
Short	R4: Todo (new)Additional Content defined by implementations
Comments	Element `SubstancePolymer.repeat.averageMolecularFormula` is part of an existing definition because parent element `SubstancePolymer.repeat` requires a cross-version extension. Element `SubstancePolymer.repeat.averageMolecularFormula` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.averageMolecularFormula` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1*
Type	Extension
Requirements	Element `SubstancePolymer.repeat.averageMolecularFormula` is part of an existing definition because parent element `SubstancePolymer.repeat` requires a cross-version extension. Element `SubstancePolymer.repeat.averageMolecularFormula` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.averageMolecularFormula` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
12. Extension.extension:averageMolecularFormula.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`averageMolecularFormula`
14. Extension.extension:averageMolecularFormula.value[x]
Definition	Todo. Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	TodoValue of extension
Control	0..1
Type	string, date, dateTime, Meta, code, Address, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Quantity, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal, CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
16. Extension.extension:repeatUnitAmountType
Slice Name	repeatUnitAmountType
Definition	R4: `SubstancePolymer.repeat.repeatUnitAmountType` (new:CodeableConcept)
Short	R4: Todo (new)Additional Content defined by implementations
Comments	Element `SubstancePolymer.repeat.repeatUnitAmountType` is part of an existing definition because parent element `SubstancePolymer.repeat` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnitAmountType` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnitAmountType` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1*
Type	Extension
Requirements	Element `SubstancePolymer.repeat.repeatUnitAmountType` is part of an existing definition because parent element `SubstancePolymer.repeat` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnitAmountType` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnitAmountType` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
18. Extension.extension:repeatUnitAmountType.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`repeatUnitAmountType`
20. Extension.extension:repeatUnitAmountType.value[x]
Definition	Todo. Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	TodoValue of extension
Control	0..1
Type	CodeableConcept, date, dateTime, Meta, code, string, Address, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Quantity, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
22. Extension.extension:repeatUnit
Slice Name	repeatUnit
Definition	R4: `SubstancePolymer.repeat.repeatUnit` (new:BackboneElement)
Short	R4: Todo (new)Additional Content defined by implementations
Comments	Element `SubstancePolymer.repeat.repeatUnit` is part of an existing definition because parent element `SubstancePolymer.repeat` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension
Requirements	Element `SubstancePolymer.repeat.repeatUnit` is part of an existing definition because parent element `SubstancePolymer.repeat` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
24. Extension.extension:repeatUnit.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
26. Extension.extension:repeatUnit.extension:orientationOfPolymerisation
Slice Name	orientationOfPolymerisation
Definition	R4: `SubstancePolymer.repeat.repeatUnit.orientationOfPolymerisation` (new:CodeableConcept)
Short	R4: Todo (new)Additional Content defined by implementations
Comments	Element `SubstancePolymer.repeat.repeatUnit.orientationOfPolymerisation` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.orientationOfPolymerisation` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.orientationOfPolymerisation` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1*
Type	Extension
Requirements	Element `SubstancePolymer.repeat.repeatUnit.orientationOfPolymerisation` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.orientationOfPolymerisation` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.orientationOfPolymerisation` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
28. Extension.extension:repeatUnit.extension:orientationOfPolymerisation.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`orientationOfPolymerisation`
30. Extension.extension:repeatUnit.extension:orientationOfPolymerisation.value[x]
Definition	Todo. Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	TodoValue of extension
Control	0..1
Type	CodeableConcept, date, dateTime, Meta, code, string, Address, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Quantity, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
32. Extension.extension:repeatUnit.extension:repeatUnit
Slice Name	repeatUnit
Definition	R4: `SubstancePolymer.repeat.repeatUnit.repeatUnit` (new:string)
Short	R4: Todo (new)Additional Content defined by implementations
Comments	Element `SubstancePolymer.repeat.repeatUnit.repeatUnit` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.repeatUnit` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.repeatUnit` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1*
Type	Extension
Requirements	Element `SubstancePolymer.repeat.repeatUnit.repeatUnit` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.repeatUnit` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.repeatUnit` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
34. Extension.extension:repeatUnit.extension:repeatUnit.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`repeatUnit`
36. Extension.extension:repeatUnit.extension:repeatUnit.value[x]
Definition	Todo. Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	TodoValue of extension
Control	0..1
Type	string, date, dateTime, Meta, code, Address, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Quantity, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal, CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
38. Extension.extension:repeatUnit.extension:amount
Slice Name	amount
Definition	R4: `SubstancePolymer.repeat.repeatUnit.amount` (new:SubstanceAmount)
Short	R4: Todo (new)Additional Content defined by implementations
Comments	Element `SubstancePolymer.repeat.repeatUnit.amount` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.amount` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.amount` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1*
Type	Extension
Requirements	Element `SubstancePolymer.repeat.repeatUnit.amount` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.amount` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.amount` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
40. Extension.extension:repeatUnit.extension:amount.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
42. Extension.extension:repeatUnit.extension:amount.extension:_datatype
Slice Name	_datatype
Definition	Slice to indicate the presence of a R4 `SubstanceAmount` in FHIR STU3
Short	DataType slice for a FHIR R4 `SubstanceAmount` valueAdditional Content defined by implementations
Control	10..1*
Type	Extension
44. Extension.extension:repeatUnit.extension:amount.extension:_datatype.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`http://hl7.org/fhir/StructureDefinition/_datatype`
46. Extension.extension:repeatUnit.extension:amount.extension:_datatype.value[x]
Definition	Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Value of extension
Comments	Must be: SubstanceAmount
Control	10..1
Type	string, date, dateTime, Meta, code, Address, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Quantity, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal, CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Fixed Value	`SubstanceAmount`
48. Extension.extension:repeatUnit.extension:amount.extension:amount
Slice Name	amount
Definition	R4: `SubstanceAmount.amount[x]` (new:Quantity, Range, string)
Short	R4: Used to capture quantitative values for a variety of elements. If only limits are given, the arithmetic mean would be the average. If only a single definite value for a given element is given, it would be captured in this field (new)Additional Content defined by implementations
Comments	Element `SubstanceAmount.amount[x]` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.amount[x]` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1*
Type	Extension
Requirements	Element `SubstanceAmount.amount[x]` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.amount[x]` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
50. Extension.extension:repeatUnit.extension:amount.extension:amount.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`amount`
52. Extension.extension:repeatUnit.extension:amount.extension:amount.value[x]
Definition	Used to capture quantitative values for a variety of elements. If only limits are given, the arithmetic mean would be the average. If only a single definite value for a given element is given, it would be captured in this field. Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Used to capture quantitative values for a variety of elements. If only limits are given, the arithmetic mean would be the average. If only a single definite value for a given element is given, it would be captured in this fieldValue of extension
Control	0..1
Type	Choice of: Quantity, Range, string, date, dateTime, Meta, code, Address, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Duration, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal, CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
54. Extension.extension:repeatUnit.extension:amount.extension:amountType
Slice Name	amountType
Definition	R4: `SubstanceAmount.amountType` (new:CodeableConcept)
Short	R4: Most elements that require a quantitative value will also have a field called amount type. Amount type should always be specified because the actual value of the amount is often dependent on it. EXAMPLE: In capturing the actual relative amounts of substances or molecular fragments it is essential to indicate whether the amount refers to a mole ratio or weight ratio. For any given element an effort should be made to use same the amount type for all related definitional elements (new)Additional Content defined by implementations
Comments	Element `SubstanceAmount.amountType` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.amountType` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1*
Type	Extension
Requirements	Element `SubstanceAmount.amountType` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.amountType` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
56. Extension.extension:repeatUnit.extension:amount.extension:amountType.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`amountType`
58. Extension.extension:repeatUnit.extension:amount.extension:amountType.value[x]
Definition	Most elements that require a quantitative value will also have a field called amount type. Amount type should always be specified because the actual value of the amount is often dependent on it. EXAMPLE: In capturing the actual relative amounts of substances or molecular fragments it is essential to indicate whether the amount refers to a mole ratio or weight ratio. For any given element an effort should be made to use same the amount type for all related definitional elements. Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Most elements that require a quantitative value will also have a field called amount type. Amount type should always be specified because the actual value of the amount is often dependent on it. EXAMPLE: In capturing the actual relative amounts of substances or molecular fragments it is essential to indicate whether the amount refers to a mole ratio or weight ratio. For any given element an effort should be made to use same the amount type for all related definitional elementsValue of extension
Control	0..1
Type	CodeableConcept, date, dateTime, Meta, code, string, Address, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Quantity, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
60. Extension.extension:repeatUnit.extension:amount.extension:amountText
Slice Name	amountText
Definition	R4: `SubstanceAmount.amountText` (new:string)
Short	R4: A textual comment on a numeric value (new)Additional Content defined by implementations
Comments	Element `SubstanceAmount.amountText` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.amountText` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1*
Type	Extension
Requirements	Element `SubstanceAmount.amountText` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.amountText` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
62. Extension.extension:repeatUnit.extension:amount.extension:amountText.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`amountText`
64. Extension.extension:repeatUnit.extension:amount.extension:amountText.value[x]
Definition	A textual comment on a numeric value. Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	A textual comment on a numeric valueValue of extension
Control	0..1
Type	string, date, dateTime, Meta, code, Address, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Quantity, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal, CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
66. Extension.extension:repeatUnit.extension:amount.extension:referenceRange
Slice Name	referenceRange
Definition	R4: `SubstanceAmount.referenceRange` (new:Element)
Short	R4: Reference range of possible or expected values (new)Additional Content defined by implementations
Comments	Element `SubstanceAmount.referenceRange` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.referenceRange` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1*
Type	Extension
Requirements	Element `SubstanceAmount.referenceRange` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.referenceRange` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
68. Extension.extension:repeatUnit.extension:amount.extension:referenceRange.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
70. Extension.extension:repeatUnit.extension:amount.extension:referenceRange.extension:lowLimit
Slice Name	lowLimit
Definition	R4: `SubstanceAmount.referenceRange.lowLimit` (new:Quantity)
Short	R4: Lower limit possible or expected (new)Additional Content defined by implementations
Comments	Element `SubstanceAmount.referenceRange.lowLimit` is part of an existing definition because parent element `SubstanceAmount.referenceRange` requires a cross-version extension. Element `SubstanceAmount.referenceRange.lowLimit` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.referenceRange.lowLimit` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1*
Type	Extension
Requirements	Element `SubstanceAmount.referenceRange.lowLimit` is part of an existing definition because parent element `SubstanceAmount.referenceRange` requires a cross-version extension. Element `SubstanceAmount.referenceRange.lowLimit` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.referenceRange.lowLimit` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
72. Extension.extension:repeatUnit.extension:amount.extension:referenceRange.extension:lowLimit.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`lowLimit`
74. Extension.extension:repeatUnit.extension:amount.extension:referenceRange.extension:lowLimit.value[x]
Definition	Lower limit possible or expected. Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Lower limit possible or expectedValue of extension
Control	0..1
Type	Quantity, date, dateTime, Meta, code, string, Address, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal, CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
76. Extension.extension:repeatUnit.extension:amount.extension:referenceRange.extension:highLimit
Slice Name	highLimit
Definition	R4: `SubstanceAmount.referenceRange.highLimit` (new:Quantity)
Short	R4: Upper limit possible or expected (new)Additional Content defined by implementations
Comments	Element `SubstanceAmount.referenceRange.highLimit` is part of an existing definition because parent element `SubstanceAmount.referenceRange` requires a cross-version extension. Element `SubstanceAmount.referenceRange.highLimit` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.referenceRange.highLimit` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1*
Type	Extension
Requirements	Element `SubstanceAmount.referenceRange.highLimit` is part of an existing definition because parent element `SubstanceAmount.referenceRange` requires a cross-version extension. Element `SubstanceAmount.referenceRange.highLimit` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.referenceRange.highLimit` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
78. Extension.extension:repeatUnit.extension:amount.extension:referenceRange.extension:highLimit.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`highLimit`
80. Extension.extension:repeatUnit.extension:amount.extension:referenceRange.extension:highLimit.value[x]
Definition	Upper limit possible or expected. Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Upper limit possible or expectedValue of extension
Control	0..1
Type	Quantity, date, dateTime, Meta, code, string, Address, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal, CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
82. Extension.extension:repeatUnit.extension:amount.extension:referenceRange.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`referenceRange`
84. Extension.extension:repeatUnit.extension:amount.extension:referenceRange.value[x]
Definition	Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Value of extension
Control	0..01
Type	Choice of: base64Binary, boolean, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, Meta
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
86. Extension.extension:repeatUnit.extension:amount.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`amount`
88. Extension.extension:repeatUnit.extension:amount.value[x]
Definition	Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Value of extension
Control	0..01
Type	Choice of: base64Binary, boolean, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, Meta
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
90. Extension.extension:repeatUnit.extension:degreeOfPolymerisation
Slice Name	degreeOfPolymerisation
Definition	R4: `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation` (new:BackboneElement)
Short	R4: Todo (new)Additional Content defined by implementations
Comments	Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension
Requirements	Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
92. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
94. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:degree
Slice Name	degree
Definition	R4: `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.degree` (new:CodeableConcept)
Short	R4: Todo (new)Additional Content defined by implementations
Comments	Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.degree` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.degree` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.degree` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1*
Type	Extension
Requirements	Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.degree` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.degree` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.degree` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
96. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:degree.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`degree`
98. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:degree.value[x]
Definition	Todo. Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	TodoValue of extension
Control	0..1
Type	CodeableConcept, date, dateTime, Meta, code, string, Address, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Quantity, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
100. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount
Slice Name	amount
Definition	R4: `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.amount` (new:SubstanceAmount)
Short	R4: Todo (new)Additional Content defined by implementations
Comments	Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.amount` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.amount` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.amount` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1*
Type	Extension
Requirements	Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.amount` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.amount` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.amount` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
102. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
104. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:_datatype
Slice Name	_datatype
Definition	Slice to indicate the presence of a R4 `SubstanceAmount` in FHIR STU3
Short	DataType slice for a FHIR R4 `SubstanceAmount` valueAdditional Content defined by implementations
Control	10..1*
Type	Extension
106. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:_datatype.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`http://hl7.org/fhir/StructureDefinition/_datatype`
108. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:_datatype.value[x]
Definition	Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Value of extension
Comments	Must be: SubstanceAmount
Control	10..1
Type	string, date, dateTime, Meta, code, Address, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Quantity, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal, CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Fixed Value	`SubstanceAmount`
110. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:amount
Slice Name	amount
Definition	R4: `SubstanceAmount.amount[x]` (new:Quantity, Range, string)
Short	R4: Used to capture quantitative values for a variety of elements. If only limits are given, the arithmetic mean would be the average. If only a single definite value for a given element is given, it would be captured in this field (new)Additional Content defined by implementations
Comments	Element `SubstanceAmount.amount[x]` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.amount[x]` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1*
Type	Extension
Requirements	Element `SubstanceAmount.amount[x]` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.amount[x]` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
112. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:amount.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`amount`
114. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:amount.value[x]
Definition	Used to capture quantitative values for a variety of elements. If only limits are given, the arithmetic mean would be the average. If only a single definite value for a given element is given, it would be captured in this field. Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Used to capture quantitative values for a variety of elements. If only limits are given, the arithmetic mean would be the average. If only a single definite value for a given element is given, it would be captured in this fieldValue of extension
Control	0..1
Type	Choice of: Quantity, Range, string, date, dateTime, Meta, code, Address, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Duration, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal, CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
116. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:amountType
Slice Name	amountType
Definition	R4: `SubstanceAmount.amountType` (new:CodeableConcept)
Short	R4: Most elements that require a quantitative value will also have a field called amount type. Amount type should always be specified because the actual value of the amount is often dependent on it. EXAMPLE: In capturing the actual relative amounts of substances or molecular fragments it is essential to indicate whether the amount refers to a mole ratio or weight ratio. For any given element an effort should be made to use same the amount type for all related definitional elements (new)Additional Content defined by implementations
Comments	Element `SubstanceAmount.amountType` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.amountType` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1*
Type	Extension
Requirements	Element `SubstanceAmount.amountType` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.amountType` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
118. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:amountType.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`amountType`
120. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:amountType.value[x]
Definition	Most elements that require a quantitative value will also have a field called amount type. Amount type should always be specified because the actual value of the amount is often dependent on it. EXAMPLE: In capturing the actual relative amounts of substances or molecular fragments it is essential to indicate whether the amount refers to a mole ratio or weight ratio. For any given element an effort should be made to use same the amount type for all related definitional elements. Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Most elements that require a quantitative value will also have a field called amount type. Amount type should always be specified because the actual value of the amount is often dependent on it. EXAMPLE: In capturing the actual relative amounts of substances or molecular fragments it is essential to indicate whether the amount refers to a mole ratio or weight ratio. For any given element an effort should be made to use same the amount type for all related definitional elementsValue of extension
Control	0..1
Type	CodeableConcept, date, dateTime, Meta, code, string, Address, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Quantity, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
122. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:amountText
Slice Name	amountText
Definition	R4: `SubstanceAmount.amountText` (new:string)
Short	R4: A textual comment on a numeric value (new)Additional Content defined by implementations
Comments	Element `SubstanceAmount.amountText` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.amountText` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1*
Type	Extension
Requirements	Element `SubstanceAmount.amountText` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.amountText` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
124. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:amountText.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`amountText`
126. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:amountText.value[x]
Definition	A textual comment on a numeric value. Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	A textual comment on a numeric valueValue of extension
Control	0..1
Type	string, date, dateTime, Meta, code, Address, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Quantity, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal, CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
128. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:referenceRange
Slice Name	referenceRange
Definition	R4: `SubstanceAmount.referenceRange` (new:Element)
Short	R4: Reference range of possible or expected values (new)Additional Content defined by implementations
Comments	Element `SubstanceAmount.referenceRange` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.referenceRange` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1*
Type	Extension
Requirements	Element `SubstanceAmount.referenceRange` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.referenceRange` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
130. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:referenceRange.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
132. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:referenceRange.extension:lowLimit
Slice Name	lowLimit
Definition	R4: `SubstanceAmount.referenceRange.lowLimit` (new:Quantity)
Short	R4: Lower limit possible or expected (new)Additional Content defined by implementations
Comments	Element `SubstanceAmount.referenceRange.lowLimit` is part of an existing definition because parent element `SubstanceAmount.referenceRange` requires a cross-version extension. Element `SubstanceAmount.referenceRange.lowLimit` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.referenceRange.lowLimit` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1*
Type	Extension
Requirements	Element `SubstanceAmount.referenceRange.lowLimit` is part of an existing definition because parent element `SubstanceAmount.referenceRange` requires a cross-version extension. Element `SubstanceAmount.referenceRange.lowLimit` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.referenceRange.lowLimit` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
134. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:referenceRange.extension:lowLimit.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`lowLimit`
136. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:referenceRange.extension:lowLimit.value[x]
Definition	Lower limit possible or expected. Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Lower limit possible or expectedValue of extension
Control	0..1
Type	Quantity, date, dateTime, Meta, code, string, Address, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal, CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
138. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:referenceRange.extension:highLimit
Slice Name	highLimit
Definition	R4: `SubstanceAmount.referenceRange.highLimit` (new:Quantity)
Short	R4: Upper limit possible or expected (new)Additional Content defined by implementations
Comments	Element `SubstanceAmount.referenceRange.highLimit` is part of an existing definition because parent element `SubstanceAmount.referenceRange` requires a cross-version extension. Element `SubstanceAmount.referenceRange.highLimit` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.referenceRange.highLimit` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1*
Type	Extension
Requirements	Element `SubstanceAmount.referenceRange.highLimit` is part of an existing definition because parent element `SubstanceAmount.referenceRange` requires a cross-version extension. Element `SubstanceAmount.referenceRange.highLimit` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.referenceRange.highLimit` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
140. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:referenceRange.extension:highLimit.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`highLimit`
142. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:referenceRange.extension:highLimit.value[x]
Definition	Upper limit possible or expected. Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Upper limit possible or expectedValue of extension
Control	0..1
Type	Quantity, date, dateTime, Meta, code, string, Address, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal, CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
144. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:referenceRange.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`referenceRange`
146. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:referenceRange.value[x]
Definition	Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Value of extension
Control	0..01
Type	Choice of: base64Binary, boolean, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, Meta
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
148. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`amount`
150. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.value[x]
Definition	Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Value of extension
Control	0..01
Type	Choice of: base64Binary, boolean, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, Meta
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
152. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`degreeOfPolymerisation`
154. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.value[x]
Definition	Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Value of extension
Control	0..01
Type	Choice of: base64Binary, boolean, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, Meta
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
156. Extension.extension:repeatUnit.extension:structuralRepresentation
Slice Name	structuralRepresentation
Definition	R4: `SubstancePolymer.repeat.repeatUnit.structuralRepresentation` (new:BackboneElement)
Short	R4: Todo (new)Additional Content defined by implementations
Comments	Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension
Requirements	Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
158. Extension.extension:repeatUnit.extension:structuralRepresentation.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
160. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:type
Slice Name	type
Definition	R4: `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.type` (new:CodeableConcept)
Short	R4: Todo (new)Additional Content defined by implementations
Comments	Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.type` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.type` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.type` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1*
Type	Extension
Requirements	Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.type` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.type` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.type` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
162. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:type.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`type`
164. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:type.value[x]
Definition	Todo. Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	TodoValue of extension
Control	0..1
Type	CodeableConcept, date, dateTime, Meta, code, string, Address, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Quantity, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
166. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:representation
Slice Name	representation
Definition	R4: `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.representation` (new:string)
Short	R4: Todo (new)Additional Content defined by implementations
Comments	Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.representation` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.representation` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.representation` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1*
Type	Extension
Requirements	Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.representation` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.representation` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.representation` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
168. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:representation.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`representation`
170. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:representation.value[x]
Definition	Todo. Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	TodoValue of extension
Control	0..1
Type	string, date, dateTime, Meta, code, Address, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Quantity, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal, CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
172. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:attachment
Slice Name	attachment
Definition	R4: `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.attachment` (new:Attachment)
Short	R4: Todo (new)Additional Content defined by implementations
Comments	Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.attachment` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.attachment` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.attachment` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1*
Type	Extension
Requirements	Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.attachment` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.attachment` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.attachment` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
174. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:attachment.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`attachment`
176. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:attachment.value[x]
Definition	Todo. Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	TodoValue of extension
Control	0..1
Type	Attachment, date, dateTime, Meta, code, string, Address, integer, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Quantity, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal, CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
178. Extension.extension:repeatUnit.extension:structuralRepresentation.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`structuralRepresentation`
180. Extension.extension:repeatUnit.extension:structuralRepresentation.value[x]
Definition	Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Value of extension
Control	0..01
Type	Choice of: base64Binary, boolean, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, Meta
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
182. Extension.extension:repeatUnit.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`repeatUnit`
184. Extension.extension:repeatUnit.value[x]
Definition	Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Value of extension
Control	0..01
Type	Choice of: base64Binary, boolean, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, Meta
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
186. Extension.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`http://hl7.org/fhir/4.0/StructureDefinition/extension-SubstancePolymer.repeat`
188. Extension.value[x]
Definition	Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Value of extension
Control	0..01
Type	Choice of: base64Binary, boolean, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, Meta
Primitive Value	This primitive element may be present, or absent, or replaced by an extension

Guidance on how to interpret the contents of this table can be foundhere

0. Extension
Definition	R4: `SubstancePolymer.repeat` (new:BackboneElement)
Short	R4: Todo (new)
Comments	Element `SubstancePolymer.repeat` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..*
Is Modifier	false
2. Extension.extension
Control	0..*
Slicing	This element introduces a set of slices on `Extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
4. Extension.extension:numberOfUnits
Slice Name	numberOfUnits
Definition	R4: `SubstancePolymer.repeat.numberOfUnits` (new:integer)
Short	R4: Todo (new)
Comments	Element `SubstancePolymer.repeat.numberOfUnits` is part of an existing definition because parent element `SubstancePolymer.repeat` requires a cross-version extension. Element `SubstancePolymer.repeat.numberOfUnits` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.numberOfUnits` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Requirements	Element `SubstancePolymer.repeat.numberOfUnits` is part of an existing definition because parent element `SubstancePolymer.repeat` requires a cross-version extension. Element `SubstancePolymer.repeat.numberOfUnits` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.numberOfUnits` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
6. Extension.extension:numberOfUnits.url
Control	1..1
Fixed Value	`numberOfUnits`
8. Extension.extension:numberOfUnits.value[x]
Definition	Todo.
Short	Todo
Control	0..1
Type	integer
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
10. Extension.extension:averageMolecularFormula
Slice Name	averageMolecularFormula
Definition	R4: `SubstancePolymer.repeat.averageMolecularFormula` (new:string)
Short	R4: Todo (new)
Comments	Element `SubstancePolymer.repeat.averageMolecularFormula` is part of an existing definition because parent element `SubstancePolymer.repeat` requires a cross-version extension. Element `SubstancePolymer.repeat.averageMolecularFormula` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.averageMolecularFormula` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Requirements	Element `SubstancePolymer.repeat.averageMolecularFormula` is part of an existing definition because parent element `SubstancePolymer.repeat` requires a cross-version extension. Element `SubstancePolymer.repeat.averageMolecularFormula` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.averageMolecularFormula` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
12. Extension.extension:averageMolecularFormula.url
Control	1..1
Fixed Value	`averageMolecularFormula`
14. Extension.extension:averageMolecularFormula.value[x]
Definition	Todo.
Short	Todo
Control	0..1
Type	string
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
16. Extension.extension:repeatUnitAmountType
Slice Name	repeatUnitAmountType
Definition	R4: `SubstancePolymer.repeat.repeatUnitAmountType` (new:CodeableConcept)
Short	R4: Todo (new)
Comments	Element `SubstancePolymer.repeat.repeatUnitAmountType` is part of an existing definition because parent element `SubstancePolymer.repeat` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnitAmountType` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnitAmountType` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Requirements	Element `SubstancePolymer.repeat.repeatUnitAmountType` is part of an existing definition because parent element `SubstancePolymer.repeat` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnitAmountType` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnitAmountType` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
18. Extension.extension:repeatUnitAmountType.url
Control	1..1
Fixed Value	`repeatUnitAmountType`
20. Extension.extension:repeatUnitAmountType.value[x]
Definition	Todo.
Short	Todo
Control	0..1
Type	CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
22. Extension.extension:repeatUnit
Slice Name	repeatUnit
Definition	R4: `SubstancePolymer.repeat.repeatUnit` (new:BackboneElement)
Short	R4: Todo (new)
Comments	Element `SubstancePolymer.repeat.repeatUnit` is part of an existing definition because parent element `SubstancePolymer.repeat` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..*
Requirements	Element `SubstancePolymer.repeat.repeatUnit` is part of an existing definition because parent element `SubstancePolymer.repeat` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
24. Extension.extension:repeatUnit.extension
Control	0..*
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
26. Extension.extension:repeatUnit.extension:orientationOfPolymerisation
Slice Name	orientationOfPolymerisation
Definition	R4: `SubstancePolymer.repeat.repeatUnit.orientationOfPolymerisation` (new:CodeableConcept)
Short	R4: Todo (new)
Comments	Element `SubstancePolymer.repeat.repeatUnit.orientationOfPolymerisation` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.orientationOfPolymerisation` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.orientationOfPolymerisation` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Requirements	Element `SubstancePolymer.repeat.repeatUnit.orientationOfPolymerisation` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.orientationOfPolymerisation` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.orientationOfPolymerisation` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
28. Extension.extension:repeatUnit.extension:orientationOfPolymerisation.url
Control	1..1
Fixed Value	`orientationOfPolymerisation`
30. Extension.extension:repeatUnit.extension:orientationOfPolymerisation.value[x]
Definition	Todo.
Short	Todo
Control	0..1
Type	CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
32. Extension.extension:repeatUnit.extension:repeatUnit
Slice Name	repeatUnit
Definition	R4: `SubstancePolymer.repeat.repeatUnit.repeatUnit` (new:string)
Short	R4: Todo (new)
Comments	Element `SubstancePolymer.repeat.repeatUnit.repeatUnit` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.repeatUnit` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.repeatUnit` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Requirements	Element `SubstancePolymer.repeat.repeatUnit.repeatUnit` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.repeatUnit` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.repeatUnit` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
34. Extension.extension:repeatUnit.extension:repeatUnit.url
Control	1..1
Fixed Value	`repeatUnit`
36. Extension.extension:repeatUnit.extension:repeatUnit.value[x]
Definition	Todo.
Short	Todo
Control	0..1
Type	string
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
38. Extension.extension:repeatUnit.extension:amount
Slice Name	amount
Definition	R4: `SubstancePolymer.repeat.repeatUnit.amount` (new:SubstanceAmount)
Short	R4: Todo (new)
Comments	Element `SubstancePolymer.repeat.repeatUnit.amount` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.amount` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.amount` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Requirements	Element `SubstancePolymer.repeat.repeatUnit.amount` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.amount` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.amount` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
40. Extension.extension:repeatUnit.extension:amount.extension
Control	0..*
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
42. Extension.extension:repeatUnit.extension:amount.extension:_datatype
Slice Name	_datatype
Definition	Slice to indicate the presence of a R4 `SubstanceAmount` in FHIR STU3
Short	DataType slice for a FHIR R4 `SubstanceAmount` value
Control	1..1
44. Extension.extension:repeatUnit.extension:amount.extension:_datatype.url
Control	1..1
Fixed Value	`http://hl7.org/fhir/StructureDefinition/_datatype`
46. Extension.extension:repeatUnit.extension:amount.extension:_datatype.value[x]
Comments	Must be: SubstanceAmount
Control	1..1
Type	string
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Fixed Value	`SubstanceAmount`
48. Extension.extension:repeatUnit.extension:amount.extension:amount
Slice Name	amount
Definition	R4: `SubstanceAmount.amount[x]` (new:Quantity, Range, string)
Short	R4: Used to capture quantitative values for a variety of elements. If only limits are given, the arithmetic mean would be the average. If only a single definite value for a given element is given, it would be captured in this field (new)
Comments	Element `SubstanceAmount.amount[x]` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.amount[x]` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Requirements	Element `SubstanceAmount.amount[x]` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.amount[x]` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
50. Extension.extension:repeatUnit.extension:amount.extension:amount.url
Control	1..1
Fixed Value	`amount`
52. Extension.extension:repeatUnit.extension:amount.extension:amount.value[x]
Definition	Used to capture quantitative values for a variety of elements. If only limits are given, the arithmetic mean would be the average. If only a single definite value for a given element is given, it would be captured in this field.
Short	Used to capture quantitative values for a variety of elements. If only limits are given, the arithmetic mean would be the average. If only a single definite value for a given element is given, it would be captured in this field
Control	0..1
Type	Choice of: Quantity, Range, string
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
54. Extension.extension:repeatUnit.extension:amount.extension:amountType
Slice Name	amountType
Definition	R4: `SubstanceAmount.amountType` (new:CodeableConcept)
Short	R4: Most elements that require a quantitative value will also have a field called amount type. Amount type should always be specified because the actual value of the amount is often dependent on it. EXAMPLE: In capturing the actual relative amounts of substances or molecular fragments it is essential to indicate whether the amount refers to a mole ratio or weight ratio. For any given element an effort should be made to use same the amount type for all related definitional elements (new)
Comments	Element `SubstanceAmount.amountType` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.amountType` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Requirements	Element `SubstanceAmount.amountType` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.amountType` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
56. Extension.extension:repeatUnit.extension:amount.extension:amountType.url
Control	1..1
Fixed Value	`amountType`
58. Extension.extension:repeatUnit.extension:amount.extension:amountType.value[x]
Definition	Most elements that require a quantitative value will also have a field called amount type. Amount type should always be specified because the actual value of the amount is often dependent on it. EXAMPLE: In capturing the actual relative amounts of substances or molecular fragments it is essential to indicate whether the amount refers to a mole ratio or weight ratio. For any given element an effort should be made to use same the amount type for all related definitional elements.
Short	Most elements that require a quantitative value will also have a field called amount type. Amount type should always be specified because the actual value of the amount is often dependent on it. EXAMPLE: In capturing the actual relative amounts of substances or molecular fragments it is essential to indicate whether the amount refers to a mole ratio or weight ratio. For any given element an effort should be made to use same the amount type for all related definitional elements
Control	0..1
Type	CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
60. Extension.extension:repeatUnit.extension:amount.extension:amountText
Slice Name	amountText
Definition	R4: `SubstanceAmount.amountText` (new:string)
Short	R4: A textual comment on a numeric value (new)
Comments	Element `SubstanceAmount.amountText` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.amountText` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Requirements	Element `SubstanceAmount.amountText` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.amountText` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
62. Extension.extension:repeatUnit.extension:amount.extension:amountText.url
Control	1..1
Fixed Value	`amountText`
64. Extension.extension:repeatUnit.extension:amount.extension:amountText.value[x]
Definition	A textual comment on a numeric value.
Short	A textual comment on a numeric value
Control	0..1
Type	string
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
66. Extension.extension:repeatUnit.extension:amount.extension:referenceRange
Slice Name	referenceRange
Definition	R4: `SubstanceAmount.referenceRange` (new:Element)
Short	R4: Reference range of possible or expected values (new)
Comments	Element `SubstanceAmount.referenceRange` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.referenceRange` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Requirements	Element `SubstanceAmount.referenceRange` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.referenceRange` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
68. Extension.extension:repeatUnit.extension:amount.extension:referenceRange.extension
Control	0..*
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
70. Extension.extension:repeatUnit.extension:amount.extension:referenceRange.extension:lowLimit
Slice Name	lowLimit
Definition	R4: `SubstanceAmount.referenceRange.lowLimit` (new:Quantity)
Short	R4: Lower limit possible or expected (new)
Comments	Element `SubstanceAmount.referenceRange.lowLimit` is part of an existing definition because parent element `SubstanceAmount.referenceRange` requires a cross-version extension. Element `SubstanceAmount.referenceRange.lowLimit` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.referenceRange.lowLimit` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Requirements	Element `SubstanceAmount.referenceRange.lowLimit` is part of an existing definition because parent element `SubstanceAmount.referenceRange` requires a cross-version extension. Element `SubstanceAmount.referenceRange.lowLimit` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.referenceRange.lowLimit` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
72. Extension.extension:repeatUnit.extension:amount.extension:referenceRange.extension:lowLimit.url
Control	1..1
Fixed Value	`lowLimit`
74. Extension.extension:repeatUnit.extension:amount.extension:referenceRange.extension:lowLimit.value[x]
Definition	Lower limit possible or expected.
Short	Lower limit possible or expected
Control	0..1
Type	Quantity
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
76. Extension.extension:repeatUnit.extension:amount.extension:referenceRange.extension:highLimit
Slice Name	highLimit
Definition	R4: `SubstanceAmount.referenceRange.highLimit` (new:Quantity)
Short	R4: Upper limit possible or expected (new)
Comments	Element `SubstanceAmount.referenceRange.highLimit` is part of an existing definition because parent element `SubstanceAmount.referenceRange` requires a cross-version extension. Element `SubstanceAmount.referenceRange.highLimit` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.referenceRange.highLimit` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Requirements	Element `SubstanceAmount.referenceRange.highLimit` is part of an existing definition because parent element `SubstanceAmount.referenceRange` requires a cross-version extension. Element `SubstanceAmount.referenceRange.highLimit` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.referenceRange.highLimit` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
78. Extension.extension:repeatUnit.extension:amount.extension:referenceRange.extension:highLimit.url
Control	1..1
Fixed Value	`highLimit`
80. Extension.extension:repeatUnit.extension:amount.extension:referenceRange.extension:highLimit.value[x]
Definition	Upper limit possible or expected.
Short	Upper limit possible or expected
Control	0..1
Type	Quantity
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
82. Extension.extension:repeatUnit.extension:amount.extension:referenceRange.url
Control	1..1
Fixed Value	`referenceRange`
84. Extension.extension:repeatUnit.extension:amount.extension:referenceRange.value[x]
Control	0..0
86. Extension.extension:repeatUnit.extension:amount.url
Control	1..1
Fixed Value	`amount`
88. Extension.extension:repeatUnit.extension:amount.value[x]
Control	0..0
90. Extension.extension:repeatUnit.extension:degreeOfPolymerisation
Slice Name	degreeOfPolymerisation
Definition	R4: `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation` (new:BackboneElement)
Short	R4: Todo (new)
Comments	Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..*
Requirements	Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
92. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension
Control	0..*
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
94. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:degree
Slice Name	degree
Definition	R4: `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.degree` (new:CodeableConcept)
Short	R4: Todo (new)
Comments	Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.degree` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.degree` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.degree` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Requirements	Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.degree` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.degree` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.degree` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
96. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:degree.url
Control	1..1
Fixed Value	`degree`
98. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:degree.value[x]
Definition	Todo.
Short	Todo
Control	0..1
Type	CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
100. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount
Slice Name	amount
Definition	R4: `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.amount` (new:SubstanceAmount)
Short	R4: Todo (new)
Comments	Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.amount` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.amount` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.amount` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Requirements	Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.amount` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.amount` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.amount` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
102. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension
Control	0..*
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
104. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:_datatype
Slice Name	_datatype
Definition	Slice to indicate the presence of a R4 `SubstanceAmount` in FHIR STU3
Short	DataType slice for a FHIR R4 `SubstanceAmount` value
Control	1..1
106. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:_datatype.url
Control	1..1
Fixed Value	`http://hl7.org/fhir/StructureDefinition/_datatype`
108. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:_datatype.value[x]
Comments	Must be: SubstanceAmount
Control	1..1
Type	string
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Fixed Value	`SubstanceAmount`
110. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:amount
Slice Name	amount
Definition	R4: `SubstanceAmount.amount[x]` (new:Quantity, Range, string)
Short	R4: Used to capture quantitative values for a variety of elements. If only limits are given, the arithmetic mean would be the average. If only a single definite value for a given element is given, it would be captured in this field (new)
Comments	Element `SubstanceAmount.amount[x]` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.amount[x]` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Requirements	Element `SubstanceAmount.amount[x]` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.amount[x]` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
112. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:amount.url
Control	1..1
Fixed Value	`amount`
114. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:amount.value[x]
Definition	Used to capture quantitative values for a variety of elements. If only limits are given, the arithmetic mean would be the average. If only a single definite value for a given element is given, it would be captured in this field.
Short	Used to capture quantitative values for a variety of elements. If only limits are given, the arithmetic mean would be the average. If only a single definite value for a given element is given, it would be captured in this field
Control	0..1
Type	Choice of: Quantity, Range, string
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
116. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:amountType
Slice Name	amountType
Definition	R4: `SubstanceAmount.amountType` (new:CodeableConcept)
Short	R4: Most elements that require a quantitative value will also have a field called amount type. Amount type should always be specified because the actual value of the amount is often dependent on it. EXAMPLE: In capturing the actual relative amounts of substances or molecular fragments it is essential to indicate whether the amount refers to a mole ratio or weight ratio. For any given element an effort should be made to use same the amount type for all related definitional elements (new)
Comments	Element `SubstanceAmount.amountType` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.amountType` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Requirements	Element `SubstanceAmount.amountType` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.amountType` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
118. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:amountType.url
Control	1..1
Fixed Value	`amountType`
120. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:amountType.value[x]
Definition	Most elements that require a quantitative value will also have a field called amount type. Amount type should always be specified because the actual value of the amount is often dependent on it. EXAMPLE: In capturing the actual relative amounts of substances or molecular fragments it is essential to indicate whether the amount refers to a mole ratio or weight ratio. For any given element an effort should be made to use same the amount type for all related definitional elements.
Short	Most elements that require a quantitative value will also have a field called amount type. Amount type should always be specified because the actual value of the amount is often dependent on it. EXAMPLE: In capturing the actual relative amounts of substances or molecular fragments it is essential to indicate whether the amount refers to a mole ratio or weight ratio. For any given element an effort should be made to use same the amount type for all related definitional elements
Control	0..1
Type	CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
122. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:amountText
Slice Name	amountText
Definition	R4: `SubstanceAmount.amountText` (new:string)
Short	R4: A textual comment on a numeric value (new)
Comments	Element `SubstanceAmount.amountText` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.amountText` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Requirements	Element `SubstanceAmount.amountText` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.amountText` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
124. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:amountText.url
Control	1..1
Fixed Value	`amountText`
126. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:amountText.value[x]
Definition	A textual comment on a numeric value.
Short	A textual comment on a numeric value
Control	0..1
Type	string
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
128. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:referenceRange
Slice Name	referenceRange
Definition	R4: `SubstanceAmount.referenceRange` (new:Element)
Short	R4: Reference range of possible or expected values (new)
Comments	Element `SubstanceAmount.referenceRange` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.referenceRange` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Requirements	Element `SubstanceAmount.referenceRange` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.referenceRange` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
130. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:referenceRange.extension
Control	0..*
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
132. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:referenceRange.extension:lowLimit
Slice Name	lowLimit
Definition	R4: `SubstanceAmount.referenceRange.lowLimit` (new:Quantity)
Short	R4: Lower limit possible or expected (new)
Comments	Element `SubstanceAmount.referenceRange.lowLimit` is part of an existing definition because parent element `SubstanceAmount.referenceRange` requires a cross-version extension. Element `SubstanceAmount.referenceRange.lowLimit` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.referenceRange.lowLimit` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Requirements	Element `SubstanceAmount.referenceRange.lowLimit` is part of an existing definition because parent element `SubstanceAmount.referenceRange` requires a cross-version extension. Element `SubstanceAmount.referenceRange.lowLimit` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.referenceRange.lowLimit` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
134. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:referenceRange.extension:lowLimit.url
Control	1..1
Fixed Value	`lowLimit`
136. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:referenceRange.extension:lowLimit.value[x]
Definition	Lower limit possible or expected.
Short	Lower limit possible or expected
Control	0..1
Type	Quantity
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
138. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:referenceRange.extension:highLimit
Slice Name	highLimit
Definition	R4: `SubstanceAmount.referenceRange.highLimit` (new:Quantity)
Short	R4: Upper limit possible or expected (new)
Comments	Element `SubstanceAmount.referenceRange.highLimit` is part of an existing definition because parent element `SubstanceAmount.referenceRange` requires a cross-version extension. Element `SubstanceAmount.referenceRange.highLimit` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.referenceRange.highLimit` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Requirements	Element `SubstanceAmount.referenceRange.highLimit` is part of an existing definition because parent element `SubstanceAmount.referenceRange` requires a cross-version extension. Element `SubstanceAmount.referenceRange.highLimit` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.referenceRange.highLimit` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
140. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:referenceRange.extension:highLimit.url
Control	1..1
Fixed Value	`highLimit`
142. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:referenceRange.extension:highLimit.value[x]
Definition	Upper limit possible or expected.
Short	Upper limit possible or expected
Control	0..1
Type	Quantity
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
144. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:referenceRange.url
Control	1..1
Fixed Value	`referenceRange`
146. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:referenceRange.value[x]
Control	0..0
148. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.url
Control	1..1
Fixed Value	`amount`
150. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.value[x]
Control	0..0
152. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.url
Control	1..1
Fixed Value	`degreeOfPolymerisation`
154. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.value[x]
Control	0..0
156. Extension.extension:repeatUnit.extension:structuralRepresentation
Slice Name	structuralRepresentation
Definition	R4: `SubstancePolymer.repeat.repeatUnit.structuralRepresentation` (new:BackboneElement)
Short	R4: Todo (new)
Comments	Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..*
Requirements	Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
158. Extension.extension:repeatUnit.extension:structuralRepresentation.extension
Control	0..*
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
160. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:type
Slice Name	type
Definition	R4: `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.type` (new:CodeableConcept)
Short	R4: Todo (new)
Comments	Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.type` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.type` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.type` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Requirements	Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.type` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.type` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.type` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
162. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:type.url
Control	1..1
Fixed Value	`type`
164. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:type.value[x]
Definition	Todo.
Short	Todo
Control	0..1
Type	CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
166. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:representation
Slice Name	representation
Definition	R4: `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.representation` (new:string)
Short	R4: Todo (new)
Comments	Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.representation` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.representation` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.representation` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Requirements	Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.representation` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.representation` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.representation` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
168. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:representation.url
Control	1..1
Fixed Value	`representation`
170. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:representation.value[x]
Definition	Todo.
Short	Todo
Control	0..1
Type	string
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
172. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:attachment
Slice Name	attachment
Definition	R4: `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.attachment` (new:Attachment)
Short	R4: Todo (new)
Comments	Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.attachment` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.attachment` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.attachment` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Requirements	Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.attachment` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.attachment` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.attachment` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
174. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:attachment.url
Control	1..1
Fixed Value	`attachment`
176. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:attachment.value[x]
Definition	Todo.
Short	Todo
Control	0..1
Type	Attachment
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
178. Extension.extension:repeatUnit.extension:structuralRepresentation.url
Control	1..1
Fixed Value	`structuralRepresentation`
180. Extension.extension:repeatUnit.extension:structuralRepresentation.value[x]
Control	0..0
182. Extension.extension:repeatUnit.url
Control	1..1
Fixed Value	`repeatUnit`
184. Extension.extension:repeatUnit.value[x]
Control	0..0
186. Extension.url
Control	1..1
Fixed Value	`http://hl7.org/fhir/4.0/StructureDefinition/extension-SubstancePolymer.repeat`
188. Extension.value[x]
Control	0..0

Guidance on how to interpret the contents of this table can be foundhere

0. Extension
Definition	R4: `SubstancePolymer.repeat` (new:BackboneElement)
Short	R4: Todo (new)
Comments	Element `SubstancePolymer.repeat` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..* This element is affected by the following invariants: ele-1
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
2. Extension.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
4. Extension.extension
Definition	An Extension
Short	Extension
Control	0..*
Type	Extension
Slicing	This element introduces a set of slices on `Extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
6. Extension.extension:numberOfUnits
Slice Name	numberOfUnits
Definition	R4: `SubstancePolymer.repeat.numberOfUnits` (new:integer)
Short	R4: Todo (new)
Comments	Element `SubstancePolymer.repeat.numberOfUnits` is part of an existing definition because parent element `SubstancePolymer.repeat` requires a cross-version extension. Element `SubstancePolymer.repeat.numberOfUnits` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.numberOfUnits` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension
Requirements	Element `SubstancePolymer.repeat.numberOfUnits` is part of an existing definition because parent element `SubstancePolymer.repeat` requires a cross-version extension. Element `SubstancePolymer.repeat.numberOfUnits` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.numberOfUnits` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
8. Extension.extension:numberOfUnits.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
10. Extension.extension:numberOfUnits.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
12. Extension.extension:numberOfUnits.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`numberOfUnits`
14. Extension.extension:numberOfUnits.value[x]
Definition	Todo.
Short	Todo
Control	0..1
Type	integer
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
16. Extension.extension:averageMolecularFormula
Slice Name	averageMolecularFormula
Definition	R4: `SubstancePolymer.repeat.averageMolecularFormula` (new:string)
Short	R4: Todo (new)
Comments	Element `SubstancePolymer.repeat.averageMolecularFormula` is part of an existing definition because parent element `SubstancePolymer.repeat` requires a cross-version extension. Element `SubstancePolymer.repeat.averageMolecularFormula` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.averageMolecularFormula` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension
Requirements	Element `SubstancePolymer.repeat.averageMolecularFormula` is part of an existing definition because parent element `SubstancePolymer.repeat` requires a cross-version extension. Element `SubstancePolymer.repeat.averageMolecularFormula` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.averageMolecularFormula` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
18. Extension.extension:averageMolecularFormula.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
20. Extension.extension:averageMolecularFormula.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
22. Extension.extension:averageMolecularFormula.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`averageMolecularFormula`
24. Extension.extension:averageMolecularFormula.value[x]
Definition	Todo.
Short	Todo
Control	0..1
Type	string
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
26. Extension.extension:repeatUnitAmountType
Slice Name	repeatUnitAmountType
Definition	R4: `SubstancePolymer.repeat.repeatUnitAmountType` (new:CodeableConcept)
Short	R4: Todo (new)
Comments	Element `SubstancePolymer.repeat.repeatUnitAmountType` is part of an existing definition because parent element `SubstancePolymer.repeat` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnitAmountType` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnitAmountType` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension
Requirements	Element `SubstancePolymer.repeat.repeatUnitAmountType` is part of an existing definition because parent element `SubstancePolymer.repeat` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnitAmountType` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnitAmountType` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
28. Extension.extension:repeatUnitAmountType.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
30. Extension.extension:repeatUnitAmountType.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
32. Extension.extension:repeatUnitAmountType.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`repeatUnitAmountType`
34. Extension.extension:repeatUnitAmountType.value[x]
Definition	Todo.
Short	Todo
Control	0..1
Type	CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
36. Extension.extension:repeatUnit
Slice Name	repeatUnit
Definition	R4: `SubstancePolymer.repeat.repeatUnit` (new:BackboneElement)
Short	R4: Todo (new)
Comments	Element `SubstancePolymer.repeat.repeatUnit` is part of an existing definition because parent element `SubstancePolymer.repeat` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension
Requirements	Element `SubstancePolymer.repeat.repeatUnit` is part of an existing definition because parent element `SubstancePolymer.repeat` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
38. Extension.extension:repeatUnit.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
40. Extension.extension:repeatUnit.extension
Definition	An Extension
Short	Extension
Control	0..*
Type	Extension
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
42. Extension.extension:repeatUnit.extension:orientationOfPolymerisation
Slice Name	orientationOfPolymerisation
Definition	R4: `SubstancePolymer.repeat.repeatUnit.orientationOfPolymerisation` (new:CodeableConcept)
Short	R4: Todo (new)
Comments	Element `SubstancePolymer.repeat.repeatUnit.orientationOfPolymerisation` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.orientationOfPolymerisation` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.orientationOfPolymerisation` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension
Requirements	Element `SubstancePolymer.repeat.repeatUnit.orientationOfPolymerisation` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.orientationOfPolymerisation` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.orientationOfPolymerisation` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
44. Extension.extension:repeatUnit.extension:orientationOfPolymerisation.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
46. Extension.extension:repeatUnit.extension:orientationOfPolymerisation.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
48. Extension.extension:repeatUnit.extension:orientationOfPolymerisation.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`orientationOfPolymerisation`
50. Extension.extension:repeatUnit.extension:orientationOfPolymerisation.value[x]
Definition	Todo.
Short	Todo
Control	0..1
Type	CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
52. Extension.extension:repeatUnit.extension:repeatUnit
Slice Name	repeatUnit
Definition	R4: `SubstancePolymer.repeat.repeatUnit.repeatUnit` (new:string)
Short	R4: Todo (new)
Comments	Element `SubstancePolymer.repeat.repeatUnit.repeatUnit` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.repeatUnit` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.repeatUnit` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension
Requirements	Element `SubstancePolymer.repeat.repeatUnit.repeatUnit` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.repeatUnit` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.repeatUnit` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
54. Extension.extension:repeatUnit.extension:repeatUnit.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
56. Extension.extension:repeatUnit.extension:repeatUnit.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
58. Extension.extension:repeatUnit.extension:repeatUnit.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`repeatUnit`
60. Extension.extension:repeatUnit.extension:repeatUnit.value[x]
Definition	Todo.
Short	Todo
Control	0..1
Type	string
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
62. Extension.extension:repeatUnit.extension:amount
Slice Name	amount
Definition	R4: `SubstancePolymer.repeat.repeatUnit.amount` (new:SubstanceAmount)
Short	R4: Todo (new)
Comments	Element `SubstancePolymer.repeat.repeatUnit.amount` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.amount` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.amount` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension
Requirements	Element `SubstancePolymer.repeat.repeatUnit.amount` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.amount` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.amount` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
64. Extension.extension:repeatUnit.extension:amount.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
66. Extension.extension:repeatUnit.extension:amount.extension
Definition	An Extension
Short	Extension
Control	0..*
Type	Extension
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
68. Extension.extension:repeatUnit.extension:amount.extension:_datatype
Slice Name	_datatype
Definition	Slice to indicate the presence of a R4 `SubstanceAmount` in FHIR STU3
Short	DataType slice for a FHIR R4 `SubstanceAmount` value
Control	1..1
Type	Extension
70. Extension.extension:repeatUnit.extension:amount.extension:_datatype.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
72. Extension.extension:repeatUnit.extension:amount.extension:_datatype.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
74. Extension.extension:repeatUnit.extension:amount.extension:_datatype.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`http://hl7.org/fhir/StructureDefinition/_datatype`
76. Extension.extension:repeatUnit.extension:amount.extension:_datatype.value[x]
Definition	Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Value of extension
Comments	Must be: SubstanceAmount
Control	1..1
Type	string
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Fixed Value	`SubstanceAmount`
78. Extension.extension:repeatUnit.extension:amount.extension:amount
Slice Name	amount
Definition	R4: `SubstanceAmount.amount[x]` (new:Quantity, Range, string)
Short	R4: Used to capture quantitative values for a variety of elements. If only limits are given, the arithmetic mean would be the average. If only a single definite value for a given element is given, it would be captured in this field (new)
Comments	Element `SubstanceAmount.amount[x]` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.amount[x]` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension
Requirements	Element `SubstanceAmount.amount[x]` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.amount[x]` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
80. Extension.extension:repeatUnit.extension:amount.extension:amount.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
82. Extension.extension:repeatUnit.extension:amount.extension:amount.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
84. Extension.extension:repeatUnit.extension:amount.extension:amount.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`amount`
86. Extension.extension:repeatUnit.extension:amount.extension:amount.value[x]
Definition	Used to capture quantitative values for a variety of elements. If only limits are given, the arithmetic mean would be the average. If only a single definite value for a given element is given, it would be captured in this field.
Short	Used to capture quantitative values for a variety of elements. If only limits are given, the arithmetic mean would be the average. If only a single definite value for a given element is given, it would be captured in this field
Control	0..1
Type	Choice of: Quantity, Range, string
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
88. Extension.extension:repeatUnit.extension:amount.extension:amountType
Slice Name	amountType
Definition	R4: `SubstanceAmount.amountType` (new:CodeableConcept)
Short	R4: Most elements that require a quantitative value will also have a field called amount type. Amount type should always be specified because the actual value of the amount is often dependent on it. EXAMPLE: In capturing the actual relative amounts of substances or molecular fragments it is essential to indicate whether the amount refers to a mole ratio or weight ratio. For any given element an effort should be made to use same the amount type for all related definitional elements (new)
Comments	Element `SubstanceAmount.amountType` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.amountType` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension
Requirements	Element `SubstanceAmount.amountType` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.amountType` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
90. Extension.extension:repeatUnit.extension:amount.extension:amountType.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
92. Extension.extension:repeatUnit.extension:amount.extension:amountType.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
94. Extension.extension:repeatUnit.extension:amount.extension:amountType.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`amountType`
96. Extension.extension:repeatUnit.extension:amount.extension:amountType.value[x]
Definition	Most elements that require a quantitative value will also have a field called amount type. Amount type should always be specified because the actual value of the amount is often dependent on it. EXAMPLE: In capturing the actual relative amounts of substances or molecular fragments it is essential to indicate whether the amount refers to a mole ratio or weight ratio. For any given element an effort should be made to use same the amount type for all related definitional elements.
Short	Most elements that require a quantitative value will also have a field called amount type. Amount type should always be specified because the actual value of the amount is often dependent on it. EXAMPLE: In capturing the actual relative amounts of substances or molecular fragments it is essential to indicate whether the amount refers to a mole ratio or weight ratio. For any given element an effort should be made to use same the amount type for all related definitional elements
Control	0..1
Type	CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
98. Extension.extension:repeatUnit.extension:amount.extension:amountText
Slice Name	amountText
Definition	R4: `SubstanceAmount.amountText` (new:string)
Short	R4: A textual comment on a numeric value (new)
Comments	Element `SubstanceAmount.amountText` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.amountText` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension
Requirements	Element `SubstanceAmount.amountText` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.amountText` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
100. Extension.extension:repeatUnit.extension:amount.extension:amountText.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
102. Extension.extension:repeatUnit.extension:amount.extension:amountText.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
104. Extension.extension:repeatUnit.extension:amount.extension:amountText.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`amountText`
106. Extension.extension:repeatUnit.extension:amount.extension:amountText.value[x]
Definition	A textual comment on a numeric value.
Short	A textual comment on a numeric value
Control	0..1
Type	string
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
108. Extension.extension:repeatUnit.extension:amount.extension:referenceRange
Slice Name	referenceRange
Definition	R4: `SubstanceAmount.referenceRange` (new:Element)
Short	R4: Reference range of possible or expected values (new)
Comments	Element `SubstanceAmount.referenceRange` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.referenceRange` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension
Requirements	Element `SubstanceAmount.referenceRange` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.referenceRange` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
110. Extension.extension:repeatUnit.extension:amount.extension:referenceRange.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
112. Extension.extension:repeatUnit.extension:amount.extension:referenceRange.extension
Definition	An Extension
Short	Extension
Control	0..*
Type	Extension
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
114. Extension.extension:repeatUnit.extension:amount.extension:referenceRange.extension:lowLimit
Slice Name	lowLimit
Definition	R4: `SubstanceAmount.referenceRange.lowLimit` (new:Quantity)
Short	R4: Lower limit possible or expected (new)
Comments	Element `SubstanceAmount.referenceRange.lowLimit` is part of an existing definition because parent element `SubstanceAmount.referenceRange` requires a cross-version extension. Element `SubstanceAmount.referenceRange.lowLimit` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.referenceRange.lowLimit` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension
Requirements	Element `SubstanceAmount.referenceRange.lowLimit` is part of an existing definition because parent element `SubstanceAmount.referenceRange` requires a cross-version extension. Element `SubstanceAmount.referenceRange.lowLimit` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.referenceRange.lowLimit` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
116. Extension.extension:repeatUnit.extension:amount.extension:referenceRange.extension:lowLimit.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
118. Extension.extension:repeatUnit.extension:amount.extension:referenceRange.extension:lowLimit.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
120. Extension.extension:repeatUnit.extension:amount.extension:referenceRange.extension:lowLimit.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`lowLimit`
122. Extension.extension:repeatUnit.extension:amount.extension:referenceRange.extension:lowLimit.value[x]
Definition	Lower limit possible or expected.
Short	Lower limit possible or expected
Control	0..1
Type	Quantity
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
124. Extension.extension:repeatUnit.extension:amount.extension:referenceRange.extension:highLimit
Slice Name	highLimit
Definition	R4: `SubstanceAmount.referenceRange.highLimit` (new:Quantity)
Short	R4: Upper limit possible or expected (new)
Comments	Element `SubstanceAmount.referenceRange.highLimit` is part of an existing definition because parent element `SubstanceAmount.referenceRange` requires a cross-version extension. Element `SubstanceAmount.referenceRange.highLimit` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.referenceRange.highLimit` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension
Requirements	Element `SubstanceAmount.referenceRange.highLimit` is part of an existing definition because parent element `SubstanceAmount.referenceRange` requires a cross-version extension. Element `SubstanceAmount.referenceRange.highLimit` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.referenceRange.highLimit` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
126. Extension.extension:repeatUnit.extension:amount.extension:referenceRange.extension:highLimit.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
128. Extension.extension:repeatUnit.extension:amount.extension:referenceRange.extension:highLimit.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
130. Extension.extension:repeatUnit.extension:amount.extension:referenceRange.extension:highLimit.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`highLimit`
132. Extension.extension:repeatUnit.extension:amount.extension:referenceRange.extension:highLimit.value[x]
Definition	Upper limit possible or expected.
Short	Upper limit possible or expected
Control	0..1
Type	Quantity
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
134. Extension.extension:repeatUnit.extension:amount.extension:referenceRange.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`referenceRange`
136. Extension.extension:repeatUnit.extension:amount.extension:referenceRange.value[x]
Definition	Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Value of extension
Control	0..0
Type	Choice of: base64Binary, boolean, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, Meta
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
138. Extension.extension:repeatUnit.extension:amount.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`amount`
140. Extension.extension:repeatUnit.extension:amount.value[x]
Definition	Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Value of extension
Control	0..0
Type	Choice of: base64Binary, boolean, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, Meta
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
142. Extension.extension:repeatUnit.extension:degreeOfPolymerisation
Slice Name	degreeOfPolymerisation
Definition	R4: `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation` (new:BackboneElement)
Short	R4: Todo (new)
Comments	Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension
Requirements	Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
144. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
146. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension
Definition	An Extension
Short	Extension
Control	0..*
Type	Extension
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
148. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:degree
Slice Name	degree
Definition	R4: `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.degree` (new:CodeableConcept)
Short	R4: Todo (new)
Comments	Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.degree` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.degree` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.degree` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension
Requirements	Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.degree` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.degree` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.degree` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
150. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:degree.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
152. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:degree.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
154. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:degree.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`degree`
156. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:degree.value[x]
Definition	Todo.
Short	Todo
Control	0..1
Type	CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
158. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount
Slice Name	amount
Definition	R4: `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.amount` (new:SubstanceAmount)
Short	R4: Todo (new)
Comments	Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.amount` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.amount` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.amount` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension
Requirements	Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.amount` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.amount` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.amount` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
160. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
162. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension
Definition	An Extension
Short	Extension
Control	0..*
Type	Extension
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
164. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:_datatype
Slice Name	_datatype
Definition	Slice to indicate the presence of a R4 `SubstanceAmount` in FHIR STU3
Short	DataType slice for a FHIR R4 `SubstanceAmount` value
Control	1..1
Type	Extension
166. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:_datatype.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
168. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:_datatype.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
170. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:_datatype.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`http://hl7.org/fhir/StructureDefinition/_datatype`
172. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:_datatype.value[x]
Definition	Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Value of extension
Comments	Must be: SubstanceAmount
Control	1..1
Type	string
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Fixed Value	`SubstanceAmount`
174. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:amount
Slice Name	amount
Definition	R4: `SubstanceAmount.amount[x]` (new:Quantity, Range, string)
Short	R4: Used to capture quantitative values for a variety of elements. If only limits are given, the arithmetic mean would be the average. If only a single definite value for a given element is given, it would be captured in this field (new)
Comments	Element `SubstanceAmount.amount[x]` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.amount[x]` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension
Requirements	Element `SubstanceAmount.amount[x]` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.amount[x]` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
176. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:amount.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
178. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:amount.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
180. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:amount.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`amount`
182. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:amount.value[x]
Definition	Used to capture quantitative values for a variety of elements. If only limits are given, the arithmetic mean would be the average. If only a single definite value for a given element is given, it would be captured in this field.
Short	Used to capture quantitative values for a variety of elements. If only limits are given, the arithmetic mean would be the average. If only a single definite value for a given element is given, it would be captured in this field
Control	0..1
Type	Choice of: Quantity, Range, string
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
184. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:amountType
Slice Name	amountType
Definition	R4: `SubstanceAmount.amountType` (new:CodeableConcept)
Short	R4: Most elements that require a quantitative value will also have a field called amount type. Amount type should always be specified because the actual value of the amount is often dependent on it. EXAMPLE: In capturing the actual relative amounts of substances or molecular fragments it is essential to indicate whether the amount refers to a mole ratio or weight ratio. For any given element an effort should be made to use same the amount type for all related definitional elements (new)
Comments	Element `SubstanceAmount.amountType` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.amountType` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension
Requirements	Element `SubstanceAmount.amountType` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.amountType` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
186. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:amountType.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
188. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:amountType.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
190. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:amountType.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`amountType`
192. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:amountType.value[x]
Definition	Most elements that require a quantitative value will also have a field called amount type. Amount type should always be specified because the actual value of the amount is often dependent on it. EXAMPLE: In capturing the actual relative amounts of substances or molecular fragments it is essential to indicate whether the amount refers to a mole ratio or weight ratio. For any given element an effort should be made to use same the amount type for all related definitional elements.
Short	Most elements that require a quantitative value will also have a field called amount type. Amount type should always be specified because the actual value of the amount is often dependent on it. EXAMPLE: In capturing the actual relative amounts of substances or molecular fragments it is essential to indicate whether the amount refers to a mole ratio or weight ratio. For any given element an effort should be made to use same the amount type for all related definitional elements
Control	0..1
Type	CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
194. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:amountText
Slice Name	amountText
Definition	R4: `SubstanceAmount.amountText` (new:string)
Short	R4: A textual comment on a numeric value (new)
Comments	Element `SubstanceAmount.amountText` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.amountText` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension
Requirements	Element `SubstanceAmount.amountText` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.amountText` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
196. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:amountText.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
198. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:amountText.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
200. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:amountText.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`amountText`
202. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:amountText.value[x]
Definition	A textual comment on a numeric value.
Short	A textual comment on a numeric value
Control	0..1
Type	string
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
204. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:referenceRange
Slice Name	referenceRange
Definition	R4: `SubstanceAmount.referenceRange` (new:Element)
Short	R4: Reference range of possible or expected values (new)
Comments	Element `SubstanceAmount.referenceRange` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.referenceRange` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension
Requirements	Element `SubstanceAmount.referenceRange` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.referenceRange` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
206. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:referenceRange.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
208. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:referenceRange.extension
Definition	An Extension
Short	Extension
Control	0..*
Type	Extension
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
210. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:referenceRange.extension:lowLimit
Slice Name	lowLimit
Definition	R4: `SubstanceAmount.referenceRange.lowLimit` (new:Quantity)
Short	R4: Lower limit possible or expected (new)
Comments	Element `SubstanceAmount.referenceRange.lowLimit` is part of an existing definition because parent element `SubstanceAmount.referenceRange` requires a cross-version extension. Element `SubstanceAmount.referenceRange.lowLimit` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.referenceRange.lowLimit` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension
Requirements	Element `SubstanceAmount.referenceRange.lowLimit` is part of an existing definition because parent element `SubstanceAmount.referenceRange` requires a cross-version extension. Element `SubstanceAmount.referenceRange.lowLimit` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.referenceRange.lowLimit` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
212. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:referenceRange.extension:lowLimit.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
214. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:referenceRange.extension:lowLimit.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
216. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:referenceRange.extension:lowLimit.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`lowLimit`
218. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:referenceRange.extension:lowLimit.value[x]
Definition	Lower limit possible or expected.
Short	Lower limit possible or expected
Control	0..1
Type	Quantity
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
220. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:referenceRange.extension:highLimit
Slice Name	highLimit
Definition	R4: `SubstanceAmount.referenceRange.highLimit` (new:Quantity)
Short	R4: Upper limit possible or expected (new)
Comments	Element `SubstanceAmount.referenceRange.highLimit` is part of an existing definition because parent element `SubstanceAmount.referenceRange` requires a cross-version extension. Element `SubstanceAmount.referenceRange.highLimit` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.referenceRange.highLimit` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension
Requirements	Element `SubstanceAmount.referenceRange.highLimit` is part of an existing definition because parent element `SubstanceAmount.referenceRange` requires a cross-version extension. Element `SubstanceAmount.referenceRange.highLimit` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.referenceRange.highLimit` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
222. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:referenceRange.extension:highLimit.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
224. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:referenceRange.extension:highLimit.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
226. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:referenceRange.extension:highLimit.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`highLimit`
228. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:referenceRange.extension:highLimit.value[x]
Definition	Upper limit possible or expected.
Short	Upper limit possible or expected
Control	0..1
Type	Quantity
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
230. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:referenceRange.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`referenceRange`
232. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.extension:referenceRange.value[x]
Definition	Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Value of extension
Control	0..0
Type	Choice of: base64Binary, boolean, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, Meta
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
234. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`amount`
236. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:amount.value[x]
Definition	Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Value of extension
Control	0..0
Type	Choice of: base64Binary, boolean, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, Meta
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
238. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`degreeOfPolymerisation`
240. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.value[x]
Definition	Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Value of extension
Control	0..0
Type	Choice of: base64Binary, boolean, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, Meta
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
242. Extension.extension:repeatUnit.extension:structuralRepresentation
Slice Name	structuralRepresentation
Definition	R4: `SubstancePolymer.repeat.repeatUnit.structuralRepresentation` (new:BackboneElement)
Short	R4: Todo (new)
Comments	Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension
Requirements	Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
244. Extension.extension:repeatUnit.extension:structuralRepresentation.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
246. Extension.extension:repeatUnit.extension:structuralRepresentation.extension
Definition	An Extension
Short	Extension
Control	0..*
Type	Extension
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
248. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:type
Slice Name	type
Definition	R4: `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.type` (new:CodeableConcept)
Short	R4: Todo (new)
Comments	Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.type` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.type` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.type` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension
Requirements	Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.type` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.type` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.type` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
250. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:type.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
252. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:type.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
254. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:type.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`type`
256. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:type.value[x]
Definition	Todo.
Short	Todo
Control	0..1
Type	CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
258. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:representation
Slice Name	representation
Definition	R4: `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.representation` (new:string)
Short	R4: Todo (new)
Comments	Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.representation` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.representation` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.representation` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension
Requirements	Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.representation` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.representation` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.representation` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
260. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:representation.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
262. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:representation.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
264. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:representation.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`representation`
266. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:representation.value[x]
Definition	Todo.
Short	Todo
Control	0..1
Type	string
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
268. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:attachment
Slice Name	attachment
Definition	R4: `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.attachment` (new:Attachment)
Short	R4: Todo (new)
Comments	Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.attachment` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.attachment` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.attachment` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension
Requirements	Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.attachment` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.attachment` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.attachment` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
270. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:attachment.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
272. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:attachment.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
274. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:attachment.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`attachment`
276. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:attachment.value[x]
Definition	Todo.
Short	Todo
Control	0..1
Type	Attachment
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
278. Extension.extension:repeatUnit.extension:structuralRepresentation.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`structuralRepresentation`
280. Extension.extension:repeatUnit.extension:structuralRepresentation.value[x]
Definition	Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Value of extension
Control	0..0
Type	Choice of: base64Binary, boolean, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, Meta
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
282. Extension.extension:repeatUnit.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`repeatUnit`
284. Extension.extension:repeatUnit.value[x]
Definition	Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Value of extension
Control	0..0
Type	Choice of: base64Binary, boolean, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, Meta
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
286. Extension.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`http://hl7.org/fhir/4.0/StructureDefinition/extension-SubstancePolymer.repeat`
288. Extension.value[x]
Definition	Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Value of extension
Control	0..0
Type	Choice of: base64Binary, boolean, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, Meta
Primitive Value	This primitive element may be present, or absent, or replaced by an extension