Generated Narrative: StructureDefinition ext-R4-SubstancePolymer.monomerSet Name Flags Card. Type Description & Constraints Extension 0..* Extension R4: Todo (new) #xD; Slices for extension 0..* Extension Extension Slice: Unordered, Open by value:url #xD; extension:ratioType 0..1 Extension R4: Todo (new) #xD; url 1..1 uri "ratioType" #xD; value[x] 0..1 CodeableConcept Todo #xD; extension:startingMaterial 0..* Extension R4: Todo (new) #xD; Slices for extension 0..* Extension Extension Slice: Unordered, Open by value:url #xD; extension:material 0..1 Extension R4: Todo (new) #xD; url 1..1 uri "material" #xD; value[x] 0..1 CodeableConcept Todo #xD; extension:type 0..1 Extension R4: Todo (new) #xD; url 1..1 uri "type" #xD; value[x] 0..1 CodeableConcept Todo #xD; extension:isDefining 0..1 Extension R4: Todo (new) #xD; url 1..1 uri "isDefining" #xD; value[x] 0..1 boolean Todo #xD; extension:amount 0..1 Extension R4: Todo (new) #xD; Slices for extension 0..* Extension Extension Slice: Unordered, Open by value:url #xD; extension:_datatype 1..1 Extension DataType slice for a FHIR R4 `SubstanceAmount` value #xD; url 1..1 uri "http://hl7.org/fhir/StructureDefinition/_datatype" #xD; value[x] 1..1 string Value of extension Fixed Value: SubstanceAmount #xD; extension:amount 0..1 Extension R4: Used to capture quantitative values for a variety of elements. If only limits are given, the arithmetic mean would be the average. If only a single definite value for a given element is given, it would be captured in this field (new) #xD; url 1..1 uri "amount" #xD; value[x] 0..1 Used to capture quantitative values for a variety of elements. If only limits are given, the arithmetic mean would be the average. If only a single definite value for a given element is given, it would be captured in this field #xD; valueQuantity Quantity #xD; valueRange Range #xD; valueString string #xD; extension:amountType 0..1 Extension R4: Most elements that require a quantitative value will also have a field called amount type. Amount type should always be specified because the actual value of the amount is often dependent on it. EXAMPLE: In capturing the actual relative amounts of substances or molecular fragments it is essential to indicate whether the amount refers to a mole ratio or weight ratio. For any given element an effort should be made to use same the amount type for all related definitional elements (new) #xD; url 1..1 uri "amountType" #xD; <a href="StructureDefinition-ext-R4-SubstancePolymer.monomerSet-definitions.html#Extension.extension:startingMaterial.extension:amount.extension:amountType.value[x]" title="Most elements that require a quantitative value will also have a field called amount type. Amount type should always be specified because the actual value of the amount is often dependent on it. EXAMPLE: In capturing the actual relative amounts of substances or molecular fragments it is essential to indicate whether the amount refers to a mole ratio or weight ratio. For any given element an effort should be made to use same the amount type for all related definitional elements.">value[x] 0..1 CodeableConcept Most elements that require a quantitative value will also have a field called amount type. Amount type should always be specified because the actual value of the amount is often dependent on it. EXAMPLE: In capturing the actual relative amounts of substances or molecular fragments it is essential to indicate whether the amount refers to a mole ratio or weight ratio. For any given element an effort should be made to use same the amount type for all related definitional elements #xD; extension:amountText 0..1 Extension R4: A textual comment on a numeric value (new) #xD; url 1..1 uri "amountText" #xD; value[x] 0..1 string A textual comment on a numeric value #xD; extension:referenceRange 0..1 Extension R4: Reference range of possible or expected values (new) #xD; Slices for extension 0..* Extension Extension Slice: Unordered, Open by value:url #xD; extension:lowLimit 0..1 Extension R4: Lower limit possible or expected (new) #xD; url 1..1 uri "lowLimit" #xD; value[x] 0..1 Quantity Lower limit possible or expected #xD; extension:highLimit 0..1 Extension R4: Upper limit possible or expected (new) #xD; url 1..1 uri "highLimit" #xD; value[x] 0..1 Quantity Upper limit possible or expected #xD; url 1..1 uri "referenceRange" #xD; value[x] 0..0 Value of extension #xD; url 1..1 uri "amount" #xD; value[x] 0..0 Value of extension #xD; url 1..1 uri "startingMaterial" #xD; value[x] 0..0 Value of extension #xD; url 1..1 uri "http://hl7.org/fhir/4.0/StructureDefinition/extension-SubstancePolymer.monomerSet" #xD; value[x] 0..0 Value of extension #xD; Documentation for this format
R4: `SubstancePolymer.monomerSet` (new:BackboneElement)
This extension is part of the cross-version definitions generated to enable use of the element `SubstancePolymer.monomerSet` as defined in FHIR R4 in FHIR STU3. The source element is defined as: `SubstancePolymer.monomerSet` 0..* `BackboneElement` Following are the generation technical comments: Element `SubstancePolymer.monomerSet` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.monomerSet` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Element `SubstancePolymer.monomerSet` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.monomerSet` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
All FHIR elements must have a @value or children
hasValue() | (children().count() > id.count())
Must have either extensions or value[x], not both
exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])
unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Extensions are always sliced by (at least) url
R4: `SubstancePolymer.monomerSet.ratioType` (new:CodeableConcept)
Element `SubstancePolymer.monomerSet.ratioType` is part of an existing definition because parent element `SubstancePolymer.monomerSet` requires a cross-version extension. Element `SubstancePolymer.monomerSet.ratioType` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.monomerSet.ratioType` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Additional Content defined by implementations
May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Source of the definition for the extension code - a logical name or a URL.
The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
R4: `SubstancePolymer.monomerSet.startingMaterial` (new:BackboneElement)
Element `SubstancePolymer.monomerSet.startingMaterial` is part of an existing definition because parent element `SubstancePolymer.monomerSet` requires a cross-version extension. Element `SubstancePolymer.monomerSet.startingMaterial` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.monomerSet.startingMaterial` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
R4: `SubstancePolymer.monomerSet.startingMaterial.material` (new:CodeableConcept)
Element `SubstancePolymer.monomerSet.startingMaterial.material` is part of an existing definition because parent element `SubstancePolymer.monomerSet.startingMaterial` requires a cross-version extension. Element `SubstancePolymer.monomerSet.startingMaterial.material` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.monomerSet.startingMaterial.material` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
R4: `SubstancePolymer.monomerSet.startingMaterial.type` (new:CodeableConcept)
Element `SubstancePolymer.monomerSet.startingMaterial.type` is part of an existing definition because parent element `SubstancePolymer.monomerSet.startingMaterial` requires a cross-version extension. Element `SubstancePolymer.monomerSet.startingMaterial.type` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.monomerSet.startingMaterial.type` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
R4: `SubstancePolymer.monomerSet.startingMaterial.isDefining` (new:boolean)
Element `SubstancePolymer.monomerSet.startingMaterial.isDefining` is part of an existing definition because parent element `SubstancePolymer.monomerSet.startingMaterial` requires a cross-version extension. Element `SubstancePolymer.monomerSet.startingMaterial.isDefining` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.monomerSet.startingMaterial.isDefining` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
R4: `SubstancePolymer.monomerSet.startingMaterial.amount` (new:SubstanceAmount)
Element `SubstancePolymer.monomerSet.startingMaterial.amount` is part of an existing definition because parent element `SubstancePolymer.monomerSet.startingMaterial` requires a cross-version extension. Element `SubstancePolymer.monomerSet.startingMaterial.amount` is not mapped to FHIR STU3, since FHIR R4 `SubstancePolymer` is not mapped. Element `SubstancePolymer.monomerSet.startingMaterial.amount` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
DataType slice for a FHIR R4 `SubstanceAmount` value
Slice to indicate the presence of a R4 `SubstanceAmount` in FHIR STU3
Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
R4: Used to capture quantitative values for a variety of elements. If only limits are given, the arithmetic mean would be the average. If only a single definite value for a given element is given, it would be captured in this field (new)
R4: `SubstanceAmount.amount[x]` (new:Quantity, Range, string)
Element `SubstanceAmount.amount[x]` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.amount[x]` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Used to capture quantitative values for a variety of elements. If only limits are given, the arithmetic mean would be the average. If only a single definite value for a given element is given, it would be captured in this field
Used to capture quantitative values for a variety of elements. If only limits are given, the arithmetic mean would be the average. If only a single definite value for a given element is given, it would be captured in this field.
R4: Most elements that require a quantitative value will also have a field called amount type. Amount type should always be specified because the actual value of the amount is often dependent on it. EXAMPLE: In capturing the actual relative amounts of substances or molecular fragments it is essential to indicate whether the amount refers to a mole ratio or weight ratio. For any given element an effort should be made to use same the amount type for all related definitional elements (new)
R4: `SubstanceAmount.amountType` (new:CodeableConcept)
Element `SubstanceAmount.amountType` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.amountType` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Most elements that require a quantitative value will also have a field called amount type. Amount type should always be specified because the actual value of the amount is often dependent on it. EXAMPLE: In capturing the actual relative amounts of substances or molecular fragments it is essential to indicate whether the amount refers to a mole ratio or weight ratio. For any given element an effort should be made to use same the amount type for all related definitional elements
Most elements that require a quantitative value will also have a field called amount type. Amount type should always be specified because the actual value of the amount is often dependent on it. EXAMPLE: In capturing the actual relative amounts of substances or molecular fragments it is essential to indicate whether the amount refers to a mole ratio or weight ratio. For any given element an effort should be made to use same the amount type for all related definitional elements.
R4: A textual comment on a numeric value (new)
R4: `SubstanceAmount.amountText` (new:string)
Element `SubstanceAmount.amountText` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.amountText` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
R4: Reference range of possible or expected values (new)
R4: `SubstanceAmount.referenceRange` (new:Element)
Element `SubstanceAmount.referenceRange` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.referenceRange` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
R4: Lower limit possible or expected (new)
R4: `SubstanceAmount.referenceRange.lowLimit` (new:Quantity)
Element `SubstanceAmount.referenceRange.lowLimit` is part of an existing definition because parent element `SubstanceAmount.referenceRange` requires a cross-version extension. Element `SubstanceAmount.referenceRange.lowLimit` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.referenceRange.lowLimit` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
R4: Upper limit possible or expected (new)
R4: `SubstanceAmount.referenceRange.highLimit` (new:Quantity)
Element `SubstanceAmount.referenceRange.highLimit` is part of an existing definition because parent element `SubstanceAmount.referenceRange` requires a cross-version extension. Element `SubstanceAmount.referenceRange.highLimit` is not mapped to FHIR STU3, since FHIR R4 `SubstanceAmount` is not mapped. Element `SubstanceAmount.referenceRange.highLimit` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).