<status value="active"/> <experimental value="false"/> <date value="2026-03-17T21:02:03.8104715+00:00"/> <publisher value="FHIR Infrastructure"/> <contact> <name value="FHIR Infrastructure"/> <telecom> <system value="url"/> <value value="http://www.hl7.org/Special/committees/fiwg"/> </telecom> </contact> <description value="R4: `MedicationStatement.status`"/> <jurisdiction> <coding> <system value="http://unstats.un.org/unsd/methods/m49/m49.htm"/> <code value="001"/> <display value="World"/> </coding> </jurisdiction> <purpose value="This extension is part of the cross-version definitions generated to enable use of the element `MedicationStatement.status` as defined in FHIR R4 in FHIR STU3. The source element is defined as: `MedicationStatement.status` 1..1 `code` Following are the generation technical comments: Element `MedicationStatement.status` is mapped to FHIR STU3 element `MedicationStatement.status` as `SourceIsBroaderThanTarget`. The target context `MedicationStatement.status` is a modifier element, so this extension does not need to be defined as a modifier."/> <fhirVersion value="3.0.2"/> <mapping> <identity value="rim"/> <uri value="http://hl7.org/v3"/> <name value="RIM Mapping"/> </mapping> <kind value="complex-type"/> <abstract value="false"/> <contextType value="resource"/> <context value="MedicationStatement.status"/> <type value="Extension"/> <baseDefinition value="http://hl7.org/fhir/StructureDefinition/Extension"/> <derivation value="constraint"/> <snapshot> <element id="Extension"> <path value="Extension"/> <short value="R4: active | completed | entered-in-error | intended | stopped | on-hold | unknown | not-taken"/> <definition value="R4: `MedicationStatement.status`"/> <comment value="Element `MedicationStatement.status` is mapped to FHIR STU3 element `MedicationStatement.status` as `SourceIsBroaderThanTarget`. The target context `MedicationStatement.status` is a modifier element, so this extension does not need to be defined as a modifier. MedicationStatement is a statement at a point in time. The status is only representative at the point when it was asserted. The value set for MedicationStatement.status contains codes that assert the status of the use of the medication by the patient (for example, stopped or on hold) as well as codes that assert the status of the medication statement itself (for example, entered in error). This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid."/> <min value="1"/> <max value="1"/> <base> <path value="Extension"/> <min value="0"/> <max value="*"/> </base> <condition value="ele-1"/> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() | (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <constraint> <key value="ext-1"/> <severity value="error"/> <human value="Must have either extensions or value[x], not both"/> <expression value="extension.exists() != value.exists()"/> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])"/> <source value="http://hl7.org/fhir/StructureDefinition/Extension"/> </constraint> <isModifier value="false"/> </element> <element id="Extension.id"> <path value="Extension.id"/> <representation value="xmlAttr"/> <short value="xml:id (or equivalent in JSON)"/> <definition value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension"> <path value="Extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <rules value="open"/> </slicing> <short value="Additional Content defined by implementations"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.url"> <path value="Extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <code value="uri"/> </type> <fixedUri value="http://hl7.org/fhir/4.0/StructureDefinition/extension-MedicationStatement.status"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.value[x]"> <path value="Extension.value[x]"/> <short value="active | completed | entered-in-error | intended | stopped | on-hold | unknown | not-taken"/> <definition value="A code representing the patient or other source's judgment about the state of the medication used that this statement is about. Generally, this will be active or completed."/> <comment value="MedicationStatement is a statement at a point in time. The status is only representative at the point when it was asserted. The value set for MedicationStatement.status contains codes that assert the status of the use of the medication by the patient (for example, stopped or on hold) as well as codes that assert the status of the medication statement itself (for example, entered in error). This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="code"/> </type> <binding> <strength value="required"/> <description value="A coded concept indicating the current status of a MedicationStatement."/> <valueSetUri value="http://hl7.org/fhir/uv/xver/ValueSet/R4-medication-statement-status-for-R3|0.1.0"/> </binding> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> </snapshot> <differential> <element id="Extension"> <path value="Extension"/> <short value="R4: active | completed | entered-in-error | intended | stopped | on-hold | unknown | not-taken"/> <definition value="R4: `MedicationStatement.status`"/> <comment value="Element `MedicationStatement.status` is mapped to FHIR STU3 element `MedicationStatement.status` as `SourceIsBroaderThanTarget`. The target context `MedicationStatement.status` is a modifier element, so this extension does not need to be defined as a modifier. MedicationStatement is a statement at a point in time. The status is only representative at the point when it was asserted. The value set for MedicationStatement.status contains codes that assert the status of the use of the medication by the patient (for example, stopped or on hold) as well as codes that assert the status of the medication statement itself (for example, entered in error). This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid."/> <min value="1"/> <max value="1"/> <base> <path value="Extension"/> <min value="0"/> <max value="*"/> </base> <isModifier value="false"/> </element> <element id="Extension.url"> <path value="Extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="http://hl7.org/fhir/4.0/StructureDefinition/extension-MedicationStatement.status"/> </element> <element id="Extension.value[x]"> <path value="Extension.value[x]"/> <short value="active | completed | entered-in-error | intended | stopped | on-hold | unknown | not-taken"/> <definition value="A code representing the patient or other source's judgment about the state of the medication used that this statement is about. Generally, this will be active or completed."/> <comment value="MedicationStatement is a statement at a point in time. The status is only representative at the point when it was asserted. The value set for MedicationStatement.status contains codes that assert the status of the use of the medication by the patient (for example, stopped or on hold) as well as codes that assert the status of the medication statement itself (for example, entered in error). This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="code"/> </type> <binding> <strength value="required"/> <description value="A coded concept indicating the current status of a MedicationStatement."/> <valueSetUri value="http://hl7.org/fhir/uv/xver/ValueSet/R4-medication-statement-status-for-R3|0.1.0"/> </binding> </element> </differential> </StructureDefinition>

Generated Narrative: StructureDefinition ext-R4-MedicationStatement.status

Name	Card.	Type	Description & Constraints
Extension	1..1	Extension	R4: active \| completed \| entered-in-error \| intended \| stopped \| on-hold \| unknown \| not-taken
url	1..1	uri	"http://hl7.org/fhir/4.0/StructureDefinition/extension-MedicationStatement.status"
value[x]	1..1	code	active \| completed \| entered-in-error \| intended \| stopped \| on-hold \| unknown \| not-taken Binding: R4MedicationStatementStatusForR3 (0.1.0) (required): A coded concept indicating the current status of a MedicationStatement.
Documentation for this format