ExtensionMedicationKnowledge_Regulatory - Definitions - Extensions for Using Data Elements from FHIR R4 in FHIR STU3 v0.1.0

Extensions for Using Data Elements from FHIR R4 in FHIR STU3 - Downloaded Version null See the Directory of published versions

Extension: ExtensionMedicationKnowledge_Regulatory - Detailed Descriptions

Page standards status: Trial-use

Maturity Level: 0

Definitions for the ext-R4-MedicationKnowledge.regulatory extension.

Key Elements Table
Differential Elements Table
Snapshot Elements Table

Guidance on how to interpret the contents of this table can be foundhere

0. Extension
Definition	R4: `MedicationKnowledge.regulatory` (new:BackboneElement) Optional Extension Element - found in all resources.
Short	R4: Regulatory information about a medication (new)Optional Extensions Element
Comments	Element `MedicationKnowledge.regulatory` is not mapped to FHIR STU3, since FHIR R4 `MedicationKnowledge` is not mapped. Element `MedicationKnowledge.regulatory` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..* This element is affected by the following invariants: ele-1
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() \| (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
2. Extension.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	10..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
4. Extension.extension:regulatoryAuthority
Slice Name	regulatoryAuthority
Definition	R4: `MedicationKnowledge.regulatory.regulatoryAuthority` (new:Reference(Organization))
Short	R4: Specifies the authority of the regulation (new)Additional Content defined by implementations
Comments	Element `MedicationKnowledge.regulatory.regulatoryAuthority` is part of an existing definition because parent element `MedicationKnowledge.regulatory` requires a cross-version extension. Element `MedicationKnowledge.regulatory.regulatoryAuthority` is not mapped to FHIR STU3, since FHIR R4 `MedicationKnowledge` is not mapped. Element `MedicationKnowledge.regulatory.regulatoryAuthority` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	10..1*
Type	Extension
Requirements	Element `MedicationKnowledge.regulatory.regulatoryAuthority` is part of an existing definition because parent element `MedicationKnowledge.regulatory` requires a cross-version extension. Element `MedicationKnowledge.regulatory.regulatoryAuthority` is not mapped to FHIR STU3, since FHIR R4 `MedicationKnowledge` is not mapped. Element `MedicationKnowledge.regulatory.regulatoryAuthority` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
6. Extension.extension:regulatoryAuthority.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`regulatoryAuthority`
8. Extension.extension:regulatoryAuthority.value[x]
Definition	The authority that is specifying the regulations. Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Specifies the authority of the regulationValue of extension
Control	10..1
Type	Reference(Cross-version Profile for R4.Organization for use in FHIR STU3, Organization), date, dateTime, Meta, code, string, Address, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Period, Quantity, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal, CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
10. Extension.extension:substitution
Slice Name	substitution
Definition	R4: `MedicationKnowledge.regulatory.substitution` (new:BackboneElement)
Short	R4: Specifies if changes are allowed when dispensing a medication from a regulatory perspective (new)Additional Content defined by implementations
Comments	Element `MedicationKnowledge.regulatory.substitution` is part of an existing definition because parent element `MedicationKnowledge.regulatory` requires a cross-version extension. Element `MedicationKnowledge.regulatory.substitution` is not mapped to FHIR STU3, since FHIR R4 `MedicationKnowledge` is not mapped. Element `MedicationKnowledge.regulatory.substitution` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension
Requirements	Element `MedicationKnowledge.regulatory.substitution` is part of an existing definition because parent element `MedicationKnowledge.regulatory` requires a cross-version extension. Element `MedicationKnowledge.regulatory.substitution` is not mapped to FHIR STU3, since FHIR R4 `MedicationKnowledge` is not mapped. Element `MedicationKnowledge.regulatory.substitution` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
12. Extension.extension:substitution.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	20..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
14. Extension.extension:substitution.extension:type
Slice Name	type
Definition	R4: `MedicationKnowledge.regulatory.substitution.type` (new:CodeableConcept)
Short	R4: Specifies the type of substitution allowed (new)Additional Content defined by implementations
Comments	Element `MedicationKnowledge.regulatory.substitution.type` is part of an existing definition because parent element `MedicationKnowledge.regulatory.substitution` requires a cross-version extension. Element `MedicationKnowledge.regulatory.substitution.type` is not mapped to FHIR STU3, since FHIR R4 `MedicationKnowledge` is not mapped. Element `MedicationKnowledge.regulatory.substitution.type` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	10..1*
Type	Extension
Requirements	Element `MedicationKnowledge.regulatory.substitution.type` is part of an existing definition because parent element `MedicationKnowledge.regulatory.substitution` requires a cross-version extension. Element `MedicationKnowledge.regulatory.substitution.type` is not mapped to FHIR STU3, since FHIR R4 `MedicationKnowledge` is not mapped. Element `MedicationKnowledge.regulatory.substitution.type` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
16. Extension.extension:substitution.extension:type.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`type`
18. Extension.extension:substitution.extension:type.value[x]
Definition	Specifies the type of substitution allowed. Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Specifies the type of substitution allowedValue of extension
Control	10..1
Type	CodeableConcept, date, dateTime, Meta, code, string, Address, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Quantity, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
20. Extension.extension:substitution.extension:allowed
Slice Name	allowed
Definition	R4: `MedicationKnowledge.regulatory.substitution.allowed` (new:boolean)
Short	R4: Specifies if regulation allows for changes in the medication when dispensing (new)Additional Content defined by implementations
Comments	Element `MedicationKnowledge.regulatory.substitution.allowed` is part of an existing definition because parent element `MedicationKnowledge.regulatory.substitution` requires a cross-version extension. Element `MedicationKnowledge.regulatory.substitution.allowed` is not mapped to FHIR STU3, since FHIR R4 `MedicationKnowledge` is not mapped. Element `MedicationKnowledge.regulatory.substitution.allowed` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	10..1*
Type	Extension
Requirements	Element `MedicationKnowledge.regulatory.substitution.allowed` is part of an existing definition because parent element `MedicationKnowledge.regulatory.substitution` requires a cross-version extension. Element `MedicationKnowledge.regulatory.substitution.allowed` is not mapped to FHIR STU3, since FHIR R4 `MedicationKnowledge` is not mapped. Element `MedicationKnowledge.regulatory.substitution.allowed` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
22. Extension.extension:substitution.extension:allowed.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`allowed`
24. Extension.extension:substitution.extension:allowed.value[x]
Definition	Specifies if regulation allows for changes in the medication when dispensing. Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Specifies if regulation allows for changes in the medication when dispensingValue of extension
Control	10..1
Type	boolean, date, dateTime, Meta, code, string, Address, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Quantity, Duration, Range, uri, Annotation, base64Binary, Signature, unsignedInt, time, Timing, decimal, CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
26. Extension.extension:substitution.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`substitution`
28. Extension.extension:substitution.value[x]
Definition	Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Value of extension
Control	0..01
Type	Choice of: base64Binary, boolean, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, Meta
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
30. Extension.extension:schedule
Slice Name	schedule
Definition	R4: `MedicationKnowledge.regulatory.schedule` (new:BackboneElement)
Short	R4: Specifies the schedule of a medication in jurisdiction (new)Additional Content defined by implementations
Comments	Element `MedicationKnowledge.regulatory.schedule` is part of an existing definition because parent element `MedicationKnowledge.regulatory` requires a cross-version extension. Element `MedicationKnowledge.regulatory.schedule` is not mapped to FHIR STU3, since FHIR R4 `MedicationKnowledge` is not mapped. Element `MedicationKnowledge.regulatory.schedule` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension
Requirements	Element `MedicationKnowledge.regulatory.schedule` is part of an existing definition because parent element `MedicationKnowledge.regulatory` requires a cross-version extension. Element `MedicationKnowledge.regulatory.schedule` is not mapped to FHIR STU3, since FHIR R4 `MedicationKnowledge` is not mapped. Element `MedicationKnowledge.regulatory.schedule` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
32. Extension.extension:schedule.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	10..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
34. Extension.extension:schedule.extension:schedule
Slice Name	schedule
Definition	R4: `MedicationKnowledge.regulatory.schedule.schedule` (new:CodeableConcept)
Short	R4: Specifies the specific drug schedule (new)Additional Content defined by implementations
Comments	Element `MedicationKnowledge.regulatory.schedule.schedule` is part of an existing definition because parent element `MedicationKnowledge.regulatory.schedule` requires a cross-version extension. Element `MedicationKnowledge.regulatory.schedule.schedule` is not mapped to FHIR STU3, since FHIR R4 `MedicationKnowledge` is not mapped. Element `MedicationKnowledge.regulatory.schedule.schedule` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	10..1*
Type	Extension
Requirements	Element `MedicationKnowledge.regulatory.schedule.schedule` is part of an existing definition because parent element `MedicationKnowledge.regulatory.schedule` requires a cross-version extension. Element `MedicationKnowledge.regulatory.schedule.schedule` is not mapped to FHIR STU3, since FHIR R4 `MedicationKnowledge` is not mapped. Element `MedicationKnowledge.regulatory.schedule.schedule` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
36. Extension.extension:schedule.extension:schedule.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`schedule`
38. Extension.extension:schedule.extension:schedule.value[x]
Definition	Specifies the specific drug schedule. Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Specifies the specific drug scheduleValue of extension
Control	10..1
Type	CodeableConcept, date, dateTime, Meta, code, string, Address, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Quantity, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
40. Extension.extension:schedule.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`schedule`
42. Extension.extension:schedule.value[x]
Definition	Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Value of extension
Control	0..01
Type	Choice of: base64Binary, boolean, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, Meta
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
44. Extension.extension:maxDispense
Slice Name	maxDispense
Definition	R4: `MedicationKnowledge.regulatory.maxDispense` (new:BackboneElement)
Short	R4: The maximum number of units of the medication that can be dispensed in a period (new)Additional Content defined by implementations
Comments	Element `MedicationKnowledge.regulatory.maxDispense` is part of an existing definition because parent element `MedicationKnowledge.regulatory` requires a cross-version extension. Element `MedicationKnowledge.regulatory.maxDispense` is not mapped to FHIR STU3, since FHIR R4 `MedicationKnowledge` is not mapped. Element `MedicationKnowledge.regulatory.maxDispense` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1*
Type	Extension
Requirements	Element `MedicationKnowledge.regulatory.maxDispense` is part of an existing definition because parent element `MedicationKnowledge.regulatory` requires a cross-version extension. Element `MedicationKnowledge.regulatory.maxDispense` is not mapped to FHIR STU3, since FHIR R4 `MedicationKnowledge` is not mapped. Element `MedicationKnowledge.regulatory.maxDispense` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
46. Extension.extension:maxDispense.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	10..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
48. Extension.extension:maxDispense.extension:quantity
Slice Name	quantity
Definition	R4: `MedicationKnowledge.regulatory.maxDispense.quantity` (new:Quantity[SimpleQuantity])
Short	R4: The maximum number of units of the medication that can be dispensed (new)Additional Content defined by implementations
Comments	Element `MedicationKnowledge.regulatory.maxDispense.quantity` is part of an existing definition because parent element `MedicationKnowledge.regulatory.maxDispense` requires a cross-version extension. Element `MedicationKnowledge.regulatory.maxDispense.quantity` is not mapped to FHIR STU3, since FHIR R4 `MedicationKnowledge` is not mapped. Element `MedicationKnowledge.regulatory.maxDispense.quantity` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	10..1*
Type	Extension
Requirements	Element `MedicationKnowledge.regulatory.maxDispense.quantity` is part of an existing definition because parent element `MedicationKnowledge.regulatory.maxDispense` requires a cross-version extension. Element `MedicationKnowledge.regulatory.maxDispense.quantity` is not mapped to FHIR STU3, since FHIR R4 `MedicationKnowledge` is not mapped. Element `MedicationKnowledge.regulatory.maxDispense.quantity` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
50. Extension.extension:maxDispense.extension:quantity.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`quantity`
52. Extension.extension:maxDispense.extension:quantity.value[x]
Definition	The maximum number of units of the medication that can be dispensed. Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	The maximum number of units of the medication that can be dispensedValue of extension
Control	10..1
Type	Quantity(SimpleQuantity), date, dateTime, Meta, code, string, Address, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal, CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
54. Extension.extension:maxDispense.extension:period
Slice Name	period
Definition	R4: `MedicationKnowledge.regulatory.maxDispense.period` (new:Duration)
Short	R4: The period that applies to the maximum number of units (new)Additional Content defined by implementations
Comments	Element `MedicationKnowledge.regulatory.maxDispense.period` is part of an existing definition because parent element `MedicationKnowledge.regulatory.maxDispense` requires a cross-version extension. Element `MedicationKnowledge.regulatory.maxDispense.period` is not mapped to FHIR STU3, since FHIR R4 `MedicationKnowledge` is not mapped. Element `MedicationKnowledge.regulatory.maxDispense.period` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1*
Type	Extension
Requirements	Element `MedicationKnowledge.regulatory.maxDispense.period` is part of an existing definition because parent element `MedicationKnowledge.regulatory.maxDispense` requires a cross-version extension. Element `MedicationKnowledge.regulatory.maxDispense.period` is not mapped to FHIR STU3, since FHIR R4 `MedicationKnowledge` is not mapped. Element `MedicationKnowledge.regulatory.maxDispense.period` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
56. Extension.extension:maxDispense.extension:period.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`period`
58. Extension.extension:maxDispense.extension:period.value[x]
Definition	The period that applies to the maximum number of units. Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	The period that applies to the maximum number of unitsValue of extension
Control	0..1
Type	Duration, date, dateTime, Meta, code, string, Address, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Quantity, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal, CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
60. Extension.extension:maxDispense.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`maxDispense`
62. Extension.extension:maxDispense.value[x]
Definition	Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Value of extension
Control	0..01
Type	Choice of: base64Binary, boolean, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, Meta
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
64. Extension.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`http://hl7.org/fhir/4.0/StructureDefinition/extension-MedicationKnowledge.regulatory`
66. Extension.value[x]
Definition	Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Value of extension
Control	0..01
Type	Choice of: base64Binary, boolean, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, Meta
Primitive Value	This primitive element may be present, or absent, or replaced by an extension

Guidance on how to interpret the contents of this table can be foundhere

0. Extension
Definition	R4: `MedicationKnowledge.regulatory` (new:BackboneElement)
Short	R4: Regulatory information about a medication (new)
Comments	Element `MedicationKnowledge.regulatory` is not mapped to FHIR STU3, since FHIR R4 `MedicationKnowledge` is not mapped. Element `MedicationKnowledge.regulatory` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..*
Is Modifier	false
2. Extension.extension
Control	1..*
Slicing	This element introduces a set of slices on `Extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
4. Extension.extension:regulatoryAuthority
Slice Name	regulatoryAuthority
Definition	R4: `MedicationKnowledge.regulatory.regulatoryAuthority` (new:Reference(Organization))
Short	R4: Specifies the authority of the regulation (new)
Comments	Element `MedicationKnowledge.regulatory.regulatoryAuthority` is part of an existing definition because parent element `MedicationKnowledge.regulatory` requires a cross-version extension. Element `MedicationKnowledge.regulatory.regulatoryAuthority` is not mapped to FHIR STU3, since FHIR R4 `MedicationKnowledge` is not mapped. Element `MedicationKnowledge.regulatory.regulatoryAuthority` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	1..1
Requirements	Element `MedicationKnowledge.regulatory.regulatoryAuthority` is part of an existing definition because parent element `MedicationKnowledge.regulatory` requires a cross-version extension. Element `MedicationKnowledge.regulatory.regulatoryAuthority` is not mapped to FHIR STU3, since FHIR R4 `MedicationKnowledge` is not mapped. Element `MedicationKnowledge.regulatory.regulatoryAuthority` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
6. Extension.extension:regulatoryAuthority.url
Control	1..1
Fixed Value	`regulatoryAuthority`
8. Extension.extension:regulatoryAuthority.value[x]
Definition	The authority that is specifying the regulations.
Short	Specifies the authority of the regulation
Control	1..1
Type	Reference(Cross-version Profile for R4.Organization for use in FHIR STU3, Organization)
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
10. Extension.extension:substitution
Slice Name	substitution
Definition	R4: `MedicationKnowledge.regulatory.substitution` (new:BackboneElement)
Short	R4: Specifies if changes are allowed when dispensing a medication from a regulatory perspective (new)
Comments	Element `MedicationKnowledge.regulatory.substitution` is part of an existing definition because parent element `MedicationKnowledge.regulatory` requires a cross-version extension. Element `MedicationKnowledge.regulatory.substitution` is not mapped to FHIR STU3, since FHIR R4 `MedicationKnowledge` is not mapped. Element `MedicationKnowledge.regulatory.substitution` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..*
Requirements	Element `MedicationKnowledge.regulatory.substitution` is part of an existing definition because parent element `MedicationKnowledge.regulatory` requires a cross-version extension. Element `MedicationKnowledge.regulatory.substitution` is not mapped to FHIR STU3, since FHIR R4 `MedicationKnowledge` is not mapped. Element `MedicationKnowledge.regulatory.substitution` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
12. Extension.extension:substitution.extension
Control	2..*
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
14. Extension.extension:substitution.extension:type
Slice Name	type
Definition	R4: `MedicationKnowledge.regulatory.substitution.type` (new:CodeableConcept)
Short	R4: Specifies the type of substitution allowed (new)
Comments	Element `MedicationKnowledge.regulatory.substitution.type` is part of an existing definition because parent element `MedicationKnowledge.regulatory.substitution` requires a cross-version extension. Element `MedicationKnowledge.regulatory.substitution.type` is not mapped to FHIR STU3, since FHIR R4 `MedicationKnowledge` is not mapped. Element `MedicationKnowledge.regulatory.substitution.type` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	1..1
Requirements	Element `MedicationKnowledge.regulatory.substitution.type` is part of an existing definition because parent element `MedicationKnowledge.regulatory.substitution` requires a cross-version extension. Element `MedicationKnowledge.regulatory.substitution.type` is not mapped to FHIR STU3, since FHIR R4 `MedicationKnowledge` is not mapped. Element `MedicationKnowledge.regulatory.substitution.type` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
16. Extension.extension:substitution.extension:type.url
Control	1..1
Fixed Value	`type`
18. Extension.extension:substitution.extension:type.value[x]
Definition	Specifies the type of substitution allowed.
Short	Specifies the type of substitution allowed
Control	1..1
Type	CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
20. Extension.extension:substitution.extension:allowed
Slice Name	allowed
Definition	R4: `MedicationKnowledge.regulatory.substitution.allowed` (new:boolean)
Short	R4: Specifies if regulation allows for changes in the medication when dispensing (new)
Comments	Element `MedicationKnowledge.regulatory.substitution.allowed` is part of an existing definition because parent element `MedicationKnowledge.regulatory.substitution` requires a cross-version extension. Element `MedicationKnowledge.regulatory.substitution.allowed` is not mapped to FHIR STU3, since FHIR R4 `MedicationKnowledge` is not mapped. Element `MedicationKnowledge.regulatory.substitution.allowed` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	1..1
Requirements	Element `MedicationKnowledge.regulatory.substitution.allowed` is part of an existing definition because parent element `MedicationKnowledge.regulatory.substitution` requires a cross-version extension. Element `MedicationKnowledge.regulatory.substitution.allowed` is not mapped to FHIR STU3, since FHIR R4 `MedicationKnowledge` is not mapped. Element `MedicationKnowledge.regulatory.substitution.allowed` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
22. Extension.extension:substitution.extension:allowed.url
Control	1..1
Fixed Value	`allowed`
24. Extension.extension:substitution.extension:allowed.value[x]
Definition	Specifies if regulation allows for changes in the medication when dispensing.
Short	Specifies if regulation allows for changes in the medication when dispensing
Control	1..1
Type	boolean
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
26. Extension.extension:substitution.url
Control	1..1
Fixed Value	`substitution`
28. Extension.extension:substitution.value[x]
Control	0..0
30. Extension.extension:schedule
Slice Name	schedule
Definition	R4: `MedicationKnowledge.regulatory.schedule` (new:BackboneElement)
Short	R4: Specifies the schedule of a medication in jurisdiction (new)
Comments	Element `MedicationKnowledge.regulatory.schedule` is part of an existing definition because parent element `MedicationKnowledge.regulatory` requires a cross-version extension. Element `MedicationKnowledge.regulatory.schedule` is not mapped to FHIR STU3, since FHIR R4 `MedicationKnowledge` is not mapped. Element `MedicationKnowledge.regulatory.schedule` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..*
Requirements	Element `MedicationKnowledge.regulatory.schedule` is part of an existing definition because parent element `MedicationKnowledge.regulatory` requires a cross-version extension. Element `MedicationKnowledge.regulatory.schedule` is not mapped to FHIR STU3, since FHIR R4 `MedicationKnowledge` is not mapped. Element `MedicationKnowledge.regulatory.schedule` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
32. Extension.extension:schedule.extension
Control	1..*
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
34. Extension.extension:schedule.extension:schedule
Slice Name	schedule
Definition	R4: `MedicationKnowledge.regulatory.schedule.schedule` (new:CodeableConcept)
Short	R4: Specifies the specific drug schedule (new)
Comments	Element `MedicationKnowledge.regulatory.schedule.schedule` is part of an existing definition because parent element `MedicationKnowledge.regulatory.schedule` requires a cross-version extension. Element `MedicationKnowledge.regulatory.schedule.schedule` is not mapped to FHIR STU3, since FHIR R4 `MedicationKnowledge` is not mapped. Element `MedicationKnowledge.regulatory.schedule.schedule` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	1..1
Requirements	Element `MedicationKnowledge.regulatory.schedule.schedule` is part of an existing definition because parent element `MedicationKnowledge.regulatory.schedule` requires a cross-version extension. Element `MedicationKnowledge.regulatory.schedule.schedule` is not mapped to FHIR STU3, since FHIR R4 `MedicationKnowledge` is not mapped. Element `MedicationKnowledge.regulatory.schedule.schedule` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
36. Extension.extension:schedule.extension:schedule.url
Control	1..1
Fixed Value	`schedule`
38. Extension.extension:schedule.extension:schedule.value[x]
Definition	Specifies the specific drug schedule.
Short	Specifies the specific drug schedule
Control	1..1
Type	CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
40. Extension.extension:schedule.url
Control	1..1
Fixed Value	`schedule`
42. Extension.extension:schedule.value[x]
Control	0..0
44. Extension.extension:maxDispense
Slice Name	maxDispense
Definition	R4: `MedicationKnowledge.regulatory.maxDispense` (new:BackboneElement)
Short	R4: The maximum number of units of the medication that can be dispensed in a period (new)
Comments	Element `MedicationKnowledge.regulatory.maxDispense` is part of an existing definition because parent element `MedicationKnowledge.regulatory` requires a cross-version extension. Element `MedicationKnowledge.regulatory.maxDispense` is not mapped to FHIR STU3, since FHIR R4 `MedicationKnowledge` is not mapped. Element `MedicationKnowledge.regulatory.maxDispense` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Requirements	Element `MedicationKnowledge.regulatory.maxDispense` is part of an existing definition because parent element `MedicationKnowledge.regulatory` requires a cross-version extension. Element `MedicationKnowledge.regulatory.maxDispense` is not mapped to FHIR STU3, since FHIR R4 `MedicationKnowledge` is not mapped. Element `MedicationKnowledge.regulatory.maxDispense` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
46. Extension.extension:maxDispense.extension
Control	1..*
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
48. Extension.extension:maxDispense.extension:quantity
Slice Name	quantity
Definition	R4: `MedicationKnowledge.regulatory.maxDispense.quantity` (new:Quantity[SimpleQuantity])
Short	R4: The maximum number of units of the medication that can be dispensed (new)
Comments	Element `MedicationKnowledge.regulatory.maxDispense.quantity` is part of an existing definition because parent element `MedicationKnowledge.regulatory.maxDispense` requires a cross-version extension. Element `MedicationKnowledge.regulatory.maxDispense.quantity` is not mapped to FHIR STU3, since FHIR R4 `MedicationKnowledge` is not mapped. Element `MedicationKnowledge.regulatory.maxDispense.quantity` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	1..1
Requirements	Element `MedicationKnowledge.regulatory.maxDispense.quantity` is part of an existing definition because parent element `MedicationKnowledge.regulatory.maxDispense` requires a cross-version extension. Element `MedicationKnowledge.regulatory.maxDispense.quantity` is not mapped to FHIR STU3, since FHIR R4 `MedicationKnowledge` is not mapped. Element `MedicationKnowledge.regulatory.maxDispense.quantity` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
50. Extension.extension:maxDispense.extension:quantity.url
Control	1..1
Fixed Value	`quantity`
52. Extension.extension:maxDispense.extension:quantity.value[x]
Definition	The maximum number of units of the medication that can be dispensed.
Short	The maximum number of units of the medication that can be dispensed
Control	1..1
Type	Quantity(SimpleQuantity)
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
54. Extension.extension:maxDispense.extension:period
Slice Name	period
Definition	R4: `MedicationKnowledge.regulatory.maxDispense.period` (new:Duration)
Short	R4: The period that applies to the maximum number of units (new)
Comments	Element `MedicationKnowledge.regulatory.maxDispense.period` is part of an existing definition because parent element `MedicationKnowledge.regulatory.maxDispense` requires a cross-version extension. Element `MedicationKnowledge.regulatory.maxDispense.period` is not mapped to FHIR STU3, since FHIR R4 `MedicationKnowledge` is not mapped. Element `MedicationKnowledge.regulatory.maxDispense.period` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Requirements	Element `MedicationKnowledge.regulatory.maxDispense.period` is part of an existing definition because parent element `MedicationKnowledge.regulatory.maxDispense` requires a cross-version extension. Element `MedicationKnowledge.regulatory.maxDispense.period` is not mapped to FHIR STU3, since FHIR R4 `MedicationKnowledge` is not mapped. Element `MedicationKnowledge.regulatory.maxDispense.period` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
56. Extension.extension:maxDispense.extension:period.url
Control	1..1
Fixed Value	`period`
58. Extension.extension:maxDispense.extension:period.value[x]
Definition	The period that applies to the maximum number of units.
Short	The period that applies to the maximum number of units
Control	0..1
Type	Duration
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
60. Extension.extension:maxDispense.url
Control	1..1
Fixed Value	`maxDispense`
62. Extension.extension:maxDispense.value[x]
Control	0..0
64. Extension.url
Control	1..1
Fixed Value	`http://hl7.org/fhir/4.0/StructureDefinition/extension-MedicationKnowledge.regulatory`
66. Extension.value[x]
Control	0..0

Guidance on how to interpret the contents of this table can be foundhere

0. Extension
Definition	R4: `MedicationKnowledge.regulatory` (new:BackboneElement)
Short	R4: Regulatory information about a medication (new)
Comments	Element `MedicationKnowledge.regulatory` is not mapped to FHIR STU3, since FHIR R4 `MedicationKnowledge` is not mapped. Element `MedicationKnowledge.regulatory` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..* This element is affected by the following invariants: ele-1
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
2. Extension.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
4. Extension.extension
Definition	An Extension
Short	Extension
Control	1..*
Type	Extension
Slicing	This element introduces a set of slices on `Extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
6. Extension.extension:regulatoryAuthority
Slice Name	regulatoryAuthority
Definition	R4: `MedicationKnowledge.regulatory.regulatoryAuthority` (new:Reference(Organization))
Short	R4: Specifies the authority of the regulation (new)
Comments	Element `MedicationKnowledge.regulatory.regulatoryAuthority` is part of an existing definition because parent element `MedicationKnowledge.regulatory` requires a cross-version extension. Element `MedicationKnowledge.regulatory.regulatoryAuthority` is not mapped to FHIR STU3, since FHIR R4 `MedicationKnowledge` is not mapped. Element `MedicationKnowledge.regulatory.regulatoryAuthority` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	1..1
Type	Extension
Requirements	Element `MedicationKnowledge.regulatory.regulatoryAuthority` is part of an existing definition because parent element `MedicationKnowledge.regulatory` requires a cross-version extension. Element `MedicationKnowledge.regulatory.regulatoryAuthority` is not mapped to FHIR STU3, since FHIR R4 `MedicationKnowledge` is not mapped. Element `MedicationKnowledge.regulatory.regulatoryAuthority` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
8. Extension.extension:regulatoryAuthority.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
10. Extension.extension:regulatoryAuthority.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
12. Extension.extension:regulatoryAuthority.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`regulatoryAuthority`
14. Extension.extension:regulatoryAuthority.value[x]
Definition	The authority that is specifying the regulations.
Short	Specifies the authority of the regulation
Control	1..1
Type	Reference(Cross-version Profile for R4.Organization for use in FHIR STU3, Organization)
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
16. Extension.extension:substitution
Slice Name	substitution
Definition	R4: `MedicationKnowledge.regulatory.substitution` (new:BackboneElement)
Short	R4: Specifies if changes are allowed when dispensing a medication from a regulatory perspective (new)
Comments	Element `MedicationKnowledge.regulatory.substitution` is part of an existing definition because parent element `MedicationKnowledge.regulatory` requires a cross-version extension. Element `MedicationKnowledge.regulatory.substitution` is not mapped to FHIR STU3, since FHIR R4 `MedicationKnowledge` is not mapped. Element `MedicationKnowledge.regulatory.substitution` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension
Requirements	Element `MedicationKnowledge.regulatory.substitution` is part of an existing definition because parent element `MedicationKnowledge.regulatory` requires a cross-version extension. Element `MedicationKnowledge.regulatory.substitution` is not mapped to FHIR STU3, since FHIR R4 `MedicationKnowledge` is not mapped. Element `MedicationKnowledge.regulatory.substitution` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
18. Extension.extension:substitution.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
20. Extension.extension:substitution.extension
Definition	An Extension
Short	Extension
Control	2..*
Type	Extension
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
22. Extension.extension:substitution.extension:type
Slice Name	type
Definition	R4: `MedicationKnowledge.regulatory.substitution.type` (new:CodeableConcept)
Short	R4: Specifies the type of substitution allowed (new)
Comments	Element `MedicationKnowledge.regulatory.substitution.type` is part of an existing definition because parent element `MedicationKnowledge.regulatory.substitution` requires a cross-version extension. Element `MedicationKnowledge.regulatory.substitution.type` is not mapped to FHIR STU3, since FHIR R4 `MedicationKnowledge` is not mapped. Element `MedicationKnowledge.regulatory.substitution.type` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	1..1
Type	Extension
Requirements	Element `MedicationKnowledge.regulatory.substitution.type` is part of an existing definition because parent element `MedicationKnowledge.regulatory.substitution` requires a cross-version extension. Element `MedicationKnowledge.regulatory.substitution.type` is not mapped to FHIR STU3, since FHIR R4 `MedicationKnowledge` is not mapped. Element `MedicationKnowledge.regulatory.substitution.type` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
24. Extension.extension:substitution.extension:type.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
26. Extension.extension:substitution.extension:type.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
28. Extension.extension:substitution.extension:type.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`type`
30. Extension.extension:substitution.extension:type.value[x]
Definition	Specifies the type of substitution allowed.
Short	Specifies the type of substitution allowed
Control	1..1
Type	CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
32. Extension.extension:substitution.extension:allowed
Slice Name	allowed
Definition	R4: `MedicationKnowledge.regulatory.substitution.allowed` (new:boolean)
Short	R4: Specifies if regulation allows for changes in the medication when dispensing (new)
Comments	Element `MedicationKnowledge.regulatory.substitution.allowed` is part of an existing definition because parent element `MedicationKnowledge.regulatory.substitution` requires a cross-version extension. Element `MedicationKnowledge.regulatory.substitution.allowed` is not mapped to FHIR STU3, since FHIR R4 `MedicationKnowledge` is not mapped. Element `MedicationKnowledge.regulatory.substitution.allowed` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	1..1
Type	Extension
Requirements	Element `MedicationKnowledge.regulatory.substitution.allowed` is part of an existing definition because parent element `MedicationKnowledge.regulatory.substitution` requires a cross-version extension. Element `MedicationKnowledge.regulatory.substitution.allowed` is not mapped to FHIR STU3, since FHIR R4 `MedicationKnowledge` is not mapped. Element `MedicationKnowledge.regulatory.substitution.allowed` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
34. Extension.extension:substitution.extension:allowed.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
36. Extension.extension:substitution.extension:allowed.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
38. Extension.extension:substitution.extension:allowed.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`allowed`
40. Extension.extension:substitution.extension:allowed.value[x]
Definition	Specifies if regulation allows for changes in the medication when dispensing.
Short	Specifies if regulation allows for changes in the medication when dispensing
Control	1..1
Type	boolean
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
42. Extension.extension:substitution.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`substitution`
44. Extension.extension:substitution.value[x]
Definition	Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Value of extension
Control	0..0
Type	Choice of: base64Binary, boolean, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, Meta
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
46. Extension.extension:schedule
Slice Name	schedule
Definition	R4: `MedicationKnowledge.regulatory.schedule` (new:BackboneElement)
Short	R4: Specifies the schedule of a medication in jurisdiction (new)
Comments	Element `MedicationKnowledge.regulatory.schedule` is part of an existing definition because parent element `MedicationKnowledge.regulatory` requires a cross-version extension. Element `MedicationKnowledge.regulatory.schedule` is not mapped to FHIR STU3, since FHIR R4 `MedicationKnowledge` is not mapped. Element `MedicationKnowledge.regulatory.schedule` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension
Requirements	Element `MedicationKnowledge.regulatory.schedule` is part of an existing definition because parent element `MedicationKnowledge.regulatory` requires a cross-version extension. Element `MedicationKnowledge.regulatory.schedule` is not mapped to FHIR STU3, since FHIR R4 `MedicationKnowledge` is not mapped. Element `MedicationKnowledge.regulatory.schedule` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
48. Extension.extension:schedule.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
50. Extension.extension:schedule.extension
Definition	An Extension
Short	Extension
Control	1..*
Type	Extension
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
52. Extension.extension:schedule.extension:schedule
Slice Name	schedule
Definition	R4: `MedicationKnowledge.regulatory.schedule.schedule` (new:CodeableConcept)
Short	R4: Specifies the specific drug schedule (new)
Comments	Element `MedicationKnowledge.regulatory.schedule.schedule` is part of an existing definition because parent element `MedicationKnowledge.regulatory.schedule` requires a cross-version extension. Element `MedicationKnowledge.regulatory.schedule.schedule` is not mapped to FHIR STU3, since FHIR R4 `MedicationKnowledge` is not mapped. Element `MedicationKnowledge.regulatory.schedule.schedule` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	1..1
Type	Extension
Requirements	Element `MedicationKnowledge.regulatory.schedule.schedule` is part of an existing definition because parent element `MedicationKnowledge.regulatory.schedule` requires a cross-version extension. Element `MedicationKnowledge.regulatory.schedule.schedule` is not mapped to FHIR STU3, since FHIR R4 `MedicationKnowledge` is not mapped. Element `MedicationKnowledge.regulatory.schedule.schedule` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
54. Extension.extension:schedule.extension:schedule.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
56. Extension.extension:schedule.extension:schedule.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
58. Extension.extension:schedule.extension:schedule.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`schedule`
60. Extension.extension:schedule.extension:schedule.value[x]
Definition	Specifies the specific drug schedule.
Short	Specifies the specific drug schedule
Control	1..1
Type	CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
62. Extension.extension:schedule.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`schedule`
64. Extension.extension:schedule.value[x]
Definition	Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Value of extension
Control	0..0
Type	Choice of: base64Binary, boolean, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, Meta
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
66. Extension.extension:maxDispense
Slice Name	maxDispense
Definition	R4: `MedicationKnowledge.regulatory.maxDispense` (new:BackboneElement)
Short	R4: The maximum number of units of the medication that can be dispensed in a period (new)
Comments	Element `MedicationKnowledge.regulatory.maxDispense` is part of an existing definition because parent element `MedicationKnowledge.regulatory` requires a cross-version extension. Element `MedicationKnowledge.regulatory.maxDispense` is not mapped to FHIR STU3, since FHIR R4 `MedicationKnowledge` is not mapped. Element `MedicationKnowledge.regulatory.maxDispense` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension
Requirements	Element `MedicationKnowledge.regulatory.maxDispense` is part of an existing definition because parent element `MedicationKnowledge.regulatory` requires a cross-version extension. Element `MedicationKnowledge.regulatory.maxDispense` is not mapped to FHIR STU3, since FHIR R4 `MedicationKnowledge` is not mapped. Element `MedicationKnowledge.regulatory.maxDispense` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
68. Extension.extension:maxDispense.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
70. Extension.extension:maxDispense.extension
Definition	An Extension
Short	Extension
Control	1..*
Type	Extension
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
72. Extension.extension:maxDispense.extension:quantity
Slice Name	quantity
Definition	R4: `MedicationKnowledge.regulatory.maxDispense.quantity` (new:Quantity[SimpleQuantity])
Short	R4: The maximum number of units of the medication that can be dispensed (new)
Comments	Element `MedicationKnowledge.regulatory.maxDispense.quantity` is part of an existing definition because parent element `MedicationKnowledge.regulatory.maxDispense` requires a cross-version extension. Element `MedicationKnowledge.regulatory.maxDispense.quantity` is not mapped to FHIR STU3, since FHIR R4 `MedicationKnowledge` is not mapped. Element `MedicationKnowledge.regulatory.maxDispense.quantity` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	1..1
Type	Extension
Requirements	Element `MedicationKnowledge.regulatory.maxDispense.quantity` is part of an existing definition because parent element `MedicationKnowledge.regulatory.maxDispense` requires a cross-version extension. Element `MedicationKnowledge.regulatory.maxDispense.quantity` is not mapped to FHIR STU3, since FHIR R4 `MedicationKnowledge` is not mapped. Element `MedicationKnowledge.regulatory.maxDispense.quantity` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
74. Extension.extension:maxDispense.extension:quantity.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
76. Extension.extension:maxDispense.extension:quantity.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
78. Extension.extension:maxDispense.extension:quantity.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`quantity`
80. Extension.extension:maxDispense.extension:quantity.value[x]
Definition	The maximum number of units of the medication that can be dispensed.
Short	The maximum number of units of the medication that can be dispensed
Control	1..1
Type	Quantity(SimpleQuantity)
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
82. Extension.extension:maxDispense.extension:period
Slice Name	period
Definition	R4: `MedicationKnowledge.regulatory.maxDispense.period` (new:Duration)
Short	R4: The period that applies to the maximum number of units (new)
Comments	Element `MedicationKnowledge.regulatory.maxDispense.period` is part of an existing definition because parent element `MedicationKnowledge.regulatory.maxDispense` requires a cross-version extension. Element `MedicationKnowledge.regulatory.maxDispense.period` is not mapped to FHIR STU3, since FHIR R4 `MedicationKnowledge` is not mapped. Element `MedicationKnowledge.regulatory.maxDispense.period` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension
Requirements	Element `MedicationKnowledge.regulatory.maxDispense.period` is part of an existing definition because parent element `MedicationKnowledge.regulatory.maxDispense` requires a cross-version extension. Element `MedicationKnowledge.regulatory.maxDispense.period` is not mapped to FHIR STU3, since FHIR R4 `MedicationKnowledge` is not mapped. Element `MedicationKnowledge.regulatory.maxDispense.period` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
84. Extension.extension:maxDispense.extension:period.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
86. Extension.extension:maxDispense.extension:period.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
88. Extension.extension:maxDispense.extension:period.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`period`
90. Extension.extension:maxDispense.extension:period.value[x]
Definition	The period that applies to the maximum number of units.
Short	The period that applies to the maximum number of units
Control	0..1
Type	Duration
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
92. Extension.extension:maxDispense.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`maxDispense`
94. Extension.extension:maxDispense.value[x]
Definition	Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Value of extension
Control	0..0
Type	Choice of: base64Binary, boolean, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, Meta
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
96. Extension.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`http://hl7.org/fhir/4.0/StructureDefinition/extension-MedicationKnowledge.regulatory`
98. Extension.value[x]
Definition	Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Value of extension
Control	0..0
Type	Choice of: base64Binary, boolean, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, Meta
Primitive Value	This primitive element may be present, or absent, or replaced by an extension