Extensions for Using Data Elements from FHIR STU3 in FHIR R5
0.1.0 - STU International flag

Extensions for Using Data Elements from FHIR STU3 in FHIR R5 - Downloaded Version null See the Directory of published versions

ValueSet: R3V3NullFlavorForR5

Official URL: http://hl7.org/fhir/uv/xver/ValueSet/R3-v3-NullFlavor-for-R5 Version: 0.1.0
Standards status: Trial-use Maturity Level: 0 Computable Name: R3V3NullFlavorForR5

This cross-version ValueSet represents content from http://hl7.org/fhir/ValueSet/v3-NullFlavor|2016-11-11 for use in FHIR R5.

This value set is part of the cross-version definitions generated to enable use of the value set http://hl7.org/fhir/ValueSet/v3-NullFlavor|2016-11-11 as defined in FHIR STU3 in FHIR R5.

The source value set is bound to the following FHIR STU3 elements:

Note that all concepts are included in this cross-version definition because no concepts have compatible representations

Following are the generation technical comments:

FHIR ValueSet http://hl7.org/fhir/ValueSet/v3-NullFlavor|2016-11-11, defined in FHIR STU3 does not have any mapping to FHIR R5

References

This value set is not used here; it may be used elsewhere (e.g. specifications and/or implementations that use this content)

Logical Definition (CLD)

  • Include these codes as defined in http://hl7.org/fhir/v3/NullFlavor version 📍2016-11-11
    CodeDisplayDefinition
    ASKUasked but unknownInformation was sought but not found (e.g., patient was asked but didn't know)
    DERderivedDescription:An actual value may exist, but it must be derived from the provided information (usually an EXPR generic data type extension will be used to convey the derivation expressionexpression .
    INVinvalidDescription:The value as represented in the instance is not a member of the set of permitted data values in the constrained value domain of a variable.
    MSKmaskedThere is information on this item available but it has not been provided by the sender due to security, privacy or other reasons. There may be an alternate mechanism for gaining access to this information.

    Note: using this null flavor does provide information that may be a breach of confidentiality, even though no detail data is provided. Its primary purpose is for those circumstances where it is necessary to inform the receiver that the information does exist without providing any detail.
    NAnot applicableKnown to have no proper value (e.g., last menstrual period for a male).
    NASKnot askedThis information has not been sought (e.g., patient was not asked)
    NAVtemporarily unavailableInformation is not available at this time but it is expected that it will be available later.
    NAVUNot availableInformation is not available at this time (with no expectation regarding whether it will or will not be available in the future).
    NINoInformationDescription:The value is exceptional (missing, omitted, incomplete, improper). No information as to the reason for being an exceptional value is provided. This is the most general exceptional value. It is also the default exceptional value.
    NINFnegative infinityNegative infinity of numbers.
    NPnot presentValue is not present in a message. This is only defined in messages, never in application data! All values not present in the message must be replaced by the applicable default, or no-information (NI) as the default of all defaults.
    OTHotherDescription:The actual value is not a member of the set of permitted data values in the constrained value domain of a variable. (e.g., concept not provided by required code system).


    Usage Notes: This flavor and its specializations are most commonly used with the CD datatype and its flavors. However, it may apply to *any* datatype where the constraints of the type are tighter than can be conveyed. For example, a PQ that is for a true measured amount whose units are not supported in UCUM, a need to convey a REAL when the type has been constrained to INT, etc.

    With coded datatypes, this null flavor may only be used if the vocabulary binding has a coding strength of CNE. By definition, all local codes and original text are part of the value set if the coding strength is CWE.
    PINFpositive infinityPositive infinity of numbers.
    QSSufficient QuantityDescription:The specific quantity is not known, but is known to be non-zero and is not specified because it makes up the bulk of the material. e.g. 'Add 10mg of ingredient X, 50mg of ingredient Y, and sufficient quantity of water to 100mL.' The null flavor would be used to express the quantity of water.
    TRCtraceThe content is greater than zero, but too small to be quantified.
    UNCun-encodedDescription: The actual value has not yet been encoded within the approved value domain.


    Example: Original text or a local code has been specified but translation or encoding to the approved value set has not yet occurred due to limitations of the sending system. Original text has been captured for a PQ, but not attempt has been made to split the value and unit or to encode the unit in UCUM.


    Usage Notes: If it is known that it is not possible to encode the concept, OTH should be used instead. However, use of UNC does not necessarily guarantee the concept will be encodable, only that encoding has not been attempted.

    Data type properties such as original text and translations may be present when this null flavor is included.
    UNKunknownDescription:A proper value is applicable, but not known.


    Usage Notes: This means the actual value is not known. If the only thing that is unknown is how to properly express the value in the necessary constraints (value set, datatype, etc.), then the OTH or UNC flavor should be used. No properties should be included for a datatype with this property unless:


    Those properties themselves directly translate to a semantic of "unknown". (E.g. a local code sent as a translation that conveys 'unknown')
    Those properties further qualify the nature of what is unknown. (E.g. specifying a use code of "H" and a URL prefix of "tel:" to convey that it is the home phone number that is unknown.)

 

Expansion

This value set expansion contains 17 concepts.

SystemVersionCodeDisplayDefinitionJSONXML
http://hl7.org/fhir/v3/NullFlavor2016-11-11  ASKUasked but unknown

Information was sought but not found (e.g., patient was asked but didn't know)

http://hl7.org/fhir/v3/NullFlavor2016-11-11  DERderived

Description:An actual value may exist, but it must be derived from the provided information (usually an EXPR generic data type extension will be used to convey the derivation expressionexpression .

http://hl7.org/fhir/v3/NullFlavor2016-11-11  INVinvalid

Description:The value as represented in the instance is not a member of the set of permitted data values in the constrained value domain of a variable.

http://hl7.org/fhir/v3/NullFlavor2016-11-11  MSKmasked

There is information on this item available but it has not been provided by the sender due to security, privacy or other reasons. There may be an alternate mechanism for gaining access to this information.

                    Note: using this null flavor does provide information that may be a breach of confidentiality, even though no detail data is provided.  Its primary purpose is for those circumstances where it is necessary to inform the receiver that the information does exist without providing any detail.
http://hl7.org/fhir/v3/NullFlavor2016-11-11  NAnot applicable

Known to have no proper value (e.g., last menstrual period for a male).

http://hl7.org/fhir/v3/NullFlavor2016-11-11  NASKnot asked

This information has not been sought (e.g., patient was not asked)

http://hl7.org/fhir/v3/NullFlavor2016-11-11  NAVtemporarily unavailable

Information is not available at this time but it is expected that it will be available later.

http://hl7.org/fhir/v3/NullFlavor2016-11-11  NAVUNot available

Information is not available at this time (with no expectation regarding whether it will or will not be available in the future).

http://hl7.org/fhir/v3/NullFlavor2016-11-11  NINoInformation

Description:The value is exceptional (missing, omitted, incomplete, improper). No information as to the reason for being an exceptional value is provided. This is the most general exceptional value. It is also the default exceptional value.

http://hl7.org/fhir/v3/NullFlavor2016-11-11  NINFnegative infinity

Negative infinity of numbers.

http://hl7.org/fhir/v3/NullFlavor2016-11-11  NPnot present

Value is not present in a message. This is only defined in messages, never in application data! All values not present in the message must be replaced by the applicable default, or no-information (NI) as the default of all defaults.

http://hl7.org/fhir/v3/NullFlavor2016-11-11  OTHother

Description:The actual value is not a member of the set of permitted data values in the constrained value domain of a variable. (e.g., concept not provided by required code system).

                       Usage Notes: This flavor and its specializations are most commonly used with the CD datatype and its flavors.  However, it may apply to *any* datatype where the constraints of the type are tighter than can be conveyed.  For example, a PQ that is for a true measured amount whose units are not supported in UCUM, a need to convey a REAL when the type has been constrained to INT, etc.

                    With coded datatypes, this null flavor may only be used if the vocabulary binding has a coding strength of CNE.  By definition, all local codes and original text are part of the value set if the coding strength is CWE.
http://hl7.org/fhir/v3/NullFlavor2016-11-11  PINFpositive infinity

Positive infinity of numbers.

http://hl7.org/fhir/v3/NullFlavor2016-11-11  QSSufficient Quantity

Description:The specific quantity is not known, but is known to be non-zero and is not specified because it makes up the bulk of the material. e.g. 'Add 10mg of ingredient X, 50mg of ingredient Y, and sufficient quantity of water to 100mL.' The null flavor would be used to express the quantity of water.

http://hl7.org/fhir/v3/NullFlavor2016-11-11  TRCtrace

The content is greater than zero, but too small to be quantified.

http://hl7.org/fhir/v3/NullFlavor2016-11-11  UNCun-encoded

Description: The actual value has not yet been encoded within the approved value domain.

                       Example: Original text or a local code has been specified but translation or encoding to the approved value set has not yet occurred due to limitations of the sending system.  Original text has been captured for a PQ, but not attempt has been made to split the value and unit or to encode the unit in UCUM.

                    
                       Usage Notes: If it is known that it is not possible to encode the concept, OTH should be used instead.  However, use of UNC does not necessarily guarantee the concept will be encodable, only that encoding has not been attempted.

                    Data type properties such as original text and translations may be present when this null flavor is included.
http://hl7.org/fhir/v3/NullFlavor2016-11-11  UNKunknown

Description:A proper value is applicable, but not known.

                       Usage Notes: This means the actual value is not known.  If the only thing that is unknown is how to properly express the value in the necessary constraints (value set, datatype, etc.), then the OTH or UNC flavor should be used.  No properties should be included for a datatype with this property unless:

                    
                       Those properties themselves directly translate to a semantic of "unknown".  (E.g. a local code sent as a translation that conveys 'unknown')
                       Those properties further qualify the nature of what is unknown.  (E.g. specifying a use code of "H" and a URL prefix of "tel:" to convey that it is the home phone number that is unknown.)

Explanation of the columns that may appear on this page:

Level A few code lists that FHIR defines are hierarchical - each code is assigned a level. In this scheme, some codes are under other codes, and imply that the code they are under also applies
System The source of the definition of the code (when the value set draws in codes defined elsewhere)
Code The code (used as the code in the resource instance)
Display The display (used in the display element of a Coding). If there is no display, implementers should not simply display the code, but map the concept into their application
Definition An explanation of the meaning of the concept
Comments Additional notes about how to use the code