Profile_R3_ServiceDefinition_R4B - Definitions - Extensions for Using Data Elements from FHIR STU3 in FHIR R4B v0.1.0

Extensions for Using Data Elements from FHIR STU3 in FHIR R4B - Downloaded Version null See the Directory of published versions

Resource Profile: Profile_R3_ServiceDefinition_R4B - Detailed Descriptions

Page standards status: Trial-use

Maturity Level: 0

Definitions for the profile-ServiceDefinition resource profile.

Key Elements Table
Differential Elements Table
Snapshot Elements Table

Guidance on how to interpret the contents of this table can be foundhere

0. Basic
Definition	Basic is used for handling concepts not yet defined in FHIR, narrative-only resources that don't map to an existing resource, and custom resources not appropriate for inclusion in the FHIR specification.
Short	Resource for non-supported content
Control	0..*
Is Modifier	false
Must Support	false
Summary	false
Alternate Names	Z-resource, Extension-resource, Custom-resource
Invariants	dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (`contained.contained.empty()`) dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (`contained.where(((id.exists() and ('#'+id in (%resource.descendants().reference \| %resource.descendants().as(canonical) \| %resource.descendants().as(uri) \| %resource.descendants().as(url)))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(uri) = '#').exists()).not()).trace('unmatched', id).empty()`) dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (`contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()`) dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (`contained.meta.security.empty()`) dom-6: A resource should have narrative for robust management (text.`div`.exists()) dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty()) dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where(((id.exists() and ('#'+id in (%resource.descendants().reference \| %resource.descendants().as(canonical) \| %resource.descendants().as(uri) \| %resource.descendants().as(url)))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(uri) = '#').exists()).not()).trace('unmatched', id).empty()) dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()) dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty()) dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. Basic.implicitRules
Definition	A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.
Short	A set of rules under which this content was created
Comments	Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.
Control	0..1
Type	uri
Is Modifier	true because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Must Support	false
Summary	true
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. Basic.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Must Support	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing	This element introduces a set of slices on `Basic.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
6. Basic.extension:url
Slice Name	url
Definition	STU3: `ServiceDefinition.url` (new:uri)
Short	STU3: Logical URI to reference this service definition (globally unique) (new)
Comments	Element `ServiceDefinition.url` is not mapped to FHIR R4B, since FHIR STU3 `ServiceDefinition` is not mapped. Element `ServiceDefinition.url` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). Can be a urn:uuid: or a urn:oid:, but real http: addresses are preferred. Multiple instances may share the same url if they have a distinct version.
Control	0..1 This element is affected by the following invariants: ele-1
Type	Extension(STU3: Logical URI to reference this service definition (globally unique) (new)) (Extension Type: uri)
Is Modifier	false
Must Support	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource (`hasValue() or (children().count() > id.count()) or $this is Parameters`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
8. Basic.extension:version
Slice Name	version
Definition	STU3: `ServiceDefinition.version` (new:string)
Short	STU3: Business version of the service definition (new)
Comments	Element `ServiceDefinition.version` is not mapped to FHIR R4B, since FHIR STU3 `ServiceDefinition` is not mapped. Element `ServiceDefinition.version` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). There may be different service definition instances that have the same identifier but different versions. The version can be appended to the url in a reference to allow a refrence to a particular business version of the service definition with the format [url]\|[version].
Control	0..1 This element is affected by the following invariants: ele-1
Type	Extension(STU3: Business version of the service definition (new)) (Extension Type: string)
Is Modifier	false
Must Support	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource (`hasValue() or (children().count() > id.count()) or $this is Parameters`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
10. Basic.extension:name
Slice Name	name
Definition	STU3: `ServiceDefinition.name` (new:string)
Short	STU3: Name for this service definition (computer friendly) (new)
Comments	Element `ServiceDefinition.name` is not mapped to FHIR R4B, since FHIR STU3 `ServiceDefinition` is not mapped. Element `ServiceDefinition.name` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). The name is not expected to be globally unique. The name should be a simple alpha-numeric type name to ensure that it is computable friendly.
Control	0..1 This element is affected by the following invariants: ele-1
Type	Extension(STU3: Name for this service definition (computer friendly) (new)) (Extension Type: string)
Is Modifier	false
Must Support	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource (`hasValue() or (children().count() > id.count()) or $this is Parameters`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
12. Basic.extension:title
Slice Name	title
Definition	STU3: `ServiceDefinition.title` (new:string)
Short	STU3: Name for this service definition (human friendly) (new)
Comments	Element `ServiceDefinition.title` is not mapped to FHIR R4B, since FHIR STU3 `ServiceDefinition` is not mapped. Element `ServiceDefinition.title` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). This name does not need to be machine-processing friendly and may contain punctuation, white-space, etc.
Control	0..1 This element is affected by the following invariants: ele-1
Type	Extension(STU3: Name for this service definition (human friendly) (new)) (Extension Type: string)
Is Modifier	false
Must Support	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource (`hasValue() or (children().count() > id.count()) or $this is Parameters`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
14. Basic.extension:date
Slice Name	date
Definition	STU3: `ServiceDefinition.date` (new:dateTime)
Short	STU3: Date this was last changed (new)
Comments	Element `ServiceDefinition.date` is not mapped to FHIR R4B, since FHIR STU3 `ServiceDefinition` is not mapped. Element `ServiceDefinition.date` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). Note that this is not the same as the resource last-modified-date, since the resource may be a secondary representation of the service definition. Additional specific dates may be added as extensions or be found by consulting Provenances associated with past versions of the resource.
Control	0..1 This element is affected by the following invariants: ele-1
Type	Extension(STU3: Date this was last changed (new)) (Extension Type: dateTime)
Is Modifier	false
Must Support	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource (`hasValue() or (children().count() > id.count()) or $this is Parameters`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
16. Basic.extension:publisher
Slice Name	publisher
Definition	STU3: `ServiceDefinition.publisher` (new:string)
Short	STU3: Name of the publisher (organization or individual) (new)
Comments	Element `ServiceDefinition.publisher` is not mapped to FHIR R4B, since FHIR STU3 `ServiceDefinition` is not mapped. Element `ServiceDefinition.publisher` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). Usually an organization, but may be an individual. The publisher (or steward) of the service definition is the organization or individual primarily responsible for the maintenance and upkeep of the service definition. This is not necessarily the same individual or organization that developed and initially authored the content. The publisher is the primary point of contact for questions or issues with the service definition. This item SHOULD be populated unless the information is available from context.
Control	0..1 This element is affected by the following invariants: ele-1
Type	Extension(STU3: Name of the publisher (organization or individual) (new)) (Extension Type: string)
Is Modifier	false
Must Support	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource (`hasValue() or (children().count() > id.count()) or $this is Parameters`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
18. Basic.extension:description
Slice Name	description
Definition	STU3: `ServiceDefinition.description` (new:markdown)
Short	STU3: Natural language description of the service definition (new)
Comments	Element `ServiceDefinition.description` is not mapped to FHIR R4B, since FHIR STU3 `ServiceDefinition` is not mapped. Element `ServiceDefinition.description` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). This description can be used to capture details such as why the service definition was built, comments about misuse, instructions for clinical use and interpretation, literature references, examples from the paper world, etc. It is not a rendering of the service definition as conveyed in the 'text' field of the resource itself. This item SHOULD be populated unless the information is available from context (e.g. the language of the profile is presumed to be the predominant language in the place the profile was created).
Control	0..1 This element is affected by the following invariants: ele-1
Type	Extension(STU3: Natural language description of the service definition (new)) (Extension Type: markdown)
Is Modifier	false
Must Support	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource (`hasValue() or (children().count() > id.count()) or $this is Parameters`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
20. Basic.extension:purpose
Slice Name	purpose
Definition	STU3: `ServiceDefinition.purpose` (new:markdown)
Short	STU3: Why this service definition is defined (new)
Comments	Element `ServiceDefinition.purpose` is not mapped to FHIR R4B, since FHIR STU3 `ServiceDefinition` is not mapped. Element `ServiceDefinition.purpose` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). This element does not describe the usage of the service definition Instead it provides traceability of ''why'' the resource is either needed or ''why'' it is defined as it is. This may be used to point to source materials or specifications that drove the structure of this service definition.
Control	0..1 This element is affected by the following invariants: ele-1
Type	Extension(STU3: Why this service definition is defined (new)) (Extension Type: markdown)
Is Modifier	false
Must Support	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource (`hasValue() or (children().count() > id.count()) or $this is Parameters`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
22. Basic.extension:usage
Slice Name	usage
Definition	STU3: `ServiceDefinition.usage` (new:string)
Short	STU3: Describes the clinical usage of the module (new)
Comments	Element `ServiceDefinition.usage` is not mapped to FHIR R4B, since FHIR STU3 `ServiceDefinition` is not mapped. Element `ServiceDefinition.usage` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Control	0..1 This element is affected by the following invariants: ele-1
Type	Extension(STU3: Describes the clinical usage of the module (new)) (Extension Type: string)
Is Modifier	false
Must Support	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource (`hasValue() or (children().count() > id.count()) or $this is Parameters`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
24. Basic.extension:approvalDate
Slice Name	approvalDate
Definition	STU3: `ServiceDefinition.approvalDate` (new:date)
Short	STU3: When the service definition was approved by publisher (new)
Comments	Element `ServiceDefinition.approvalDate` is not mapped to FHIR R4B, since FHIR STU3 `ServiceDefinition` is not mapped. Element `ServiceDefinition.approvalDate` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). The 'date' element may be more recent than the approval date because of minor changes / editorial corrections.
Control	0..1 This element is affected by the following invariants: ele-1
Type	Extension(STU3: When the service definition was approved by publisher (new)) (Extension Type: date)
Is Modifier	false
Must Support	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource (`hasValue() or (children().count() > id.count()) or $this is Parameters`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
26. Basic.extension:lastReviewDate
Slice Name	lastReviewDate
Definition	STU3: `ServiceDefinition.lastReviewDate` (new:date)
Short	STU3: When the service definition was last reviewed (new)
Comments	Element `ServiceDefinition.lastReviewDate` is not mapped to FHIR R4B, since FHIR STU3 `ServiceDefinition` is not mapped. Element `ServiceDefinition.lastReviewDate` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). If specified, this is usually after the approval date.
Control	0..1 This element is affected by the following invariants: ele-1
Type	Extension(STU3: When the service definition was last reviewed (new)) (Extension Type: date)
Is Modifier	false
Must Support	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource (`hasValue() or (children().count() > id.count()) or $this is Parameters`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
28. Basic.extension:effectivePeriod
Slice Name	effectivePeriod
Definition	STU3: `ServiceDefinition.effectivePeriod` (new:Period)
Short	STU3: When the service definition is expected to be used (new)
Comments	Element `ServiceDefinition.effectivePeriod` is not mapped to FHIR R4B, since FHIR STU3 `ServiceDefinition` is not mapped. Element `ServiceDefinition.effectivePeriod` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). The effective period for a service definition determines when the content is applicable for usage and is independent of publication and review dates. For example, a measure intended to be used for the year 2016 might be published in 2015.
Control	0..1 This element is affected by the following invariants: ele-1
Type	Extension(STU3: When the service definition is expected to be used (new)) (Extension Type: Period)
Is Modifier	false
Must Support	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource (`hasValue() or (children().count() > id.count()) or $this is Parameters`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
30. Basic.extension:useContext
Slice Name	useContext
Definition	STU3: `ServiceDefinition.useContext` (new:UsageContext)
Short	STU3: Context the content is intended to support (new)
Comments	Element `ServiceDefinition.useContext` is not mapped to FHIR R4B, since FHIR STU3 `ServiceDefinition` is not mapped. Element `ServiceDefinition.useContext` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). When multiple useContexts are specified, there is no expectation whether all or any of the contexts apply.
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(STU3: Context the content is intended to support (new)) (Extension Type: UsageContext)
Is Modifier	false
Must Support	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource (`hasValue() or (children().count() > id.count()) or $this is Parameters`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
32. Basic.extension:jurisdiction
Slice Name	jurisdiction
Definition	STU3: `ServiceDefinition.jurisdiction` (new:CodeableConcept)
Short	STU3: Intended jurisdiction for service definition (if applicable) (new)
Comments	Element `ServiceDefinition.jurisdiction` is not mapped to FHIR R4B, since FHIR STU3 `ServiceDefinition` is not mapped. Element `ServiceDefinition.jurisdiction` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). It may be possible for the service definition to be used in jurisdictions other than those for which it was originally designed or intended.
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(STU3: Intended jurisdiction for service definition (if applicable) (new)) (Extension Type: CodeableConcept)
Is Modifier	false
Must Support	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource (`hasValue() or (children().count() > id.count()) or $this is Parameters`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
34. Basic.extension:topic
Slice Name	topic
Definition	STU3: `ServiceDefinition.topic` (new:CodeableConcept)
Short	STU3: E.g. Education, Treatment, Assessment, etc (new)
Comments	Element `ServiceDefinition.topic` is not mapped to FHIR R4B, since FHIR STU3 `ServiceDefinition` is not mapped. Element `ServiceDefinition.topic` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(STU3: E.g. Education, Treatment, Assessment, etc (new)) (Extension Type: CodeableConcept)
Is Modifier	false
Must Support	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource (`hasValue() or (children().count() > id.count()) or $this is Parameters`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
36. Basic.extension:contributor
Slice Name	contributor
Definition	STU3: `ServiceDefinition.contributor` (new:Contributor)
Short	STU3: A content contributor (new)
Comments	Element `ServiceDefinition.contributor` is not mapped to FHIR R4B, since FHIR STU3 `ServiceDefinition` is not mapped. Element `ServiceDefinition.contributor` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(STU3: A content contributor (new)) (Extension Type: Contributor)
Is Modifier	false
Must Support	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource (`hasValue() or (children().count() > id.count()) or $this is Parameters`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
38. Basic.extension:contact
Slice Name	contact
Definition	STU3: `ServiceDefinition.contact` (new:ContactDetail)
Short	STU3: Contact details for the publisher (new)
Comments	Element `ServiceDefinition.contact` is not mapped to FHIR R4B, since FHIR STU3 `ServiceDefinition` is not mapped. Element `ServiceDefinition.contact` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). May be a web site, an email address, a telephone number, etc.
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(STU3: Contact details for the publisher (new)) (Extension Type: ContactDetail)
Is Modifier	false
Must Support	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource (`hasValue() or (children().count() > id.count()) or $this is Parameters`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
40. Basic.extension:copyright
Slice Name	copyright
Definition	STU3: `ServiceDefinition.copyright` (new:markdown)
Short	STU3: Use and/or publishing restrictions (new)
Comments	Element `ServiceDefinition.copyright` is not mapped to FHIR R4B, since FHIR STU3 `ServiceDefinition` is not mapped. Element `ServiceDefinition.copyright` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Control	0..1 This element is affected by the following invariants: ele-1
Type	Extension(STU3: Use and/or publishing restrictions (new)) (Extension Type: markdown)
Is Modifier	false
Must Support	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource (`hasValue() or (children().count() > id.count()) or $this is Parameters`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
42. Basic.extension:relatedArtifact
Slice Name	relatedArtifact
Definition	STU3: `ServiceDefinition.relatedArtifact` (new:RelatedArtifact)
Short	STU3: Additional documentation, citations, etc (new)
Comments	Element `ServiceDefinition.relatedArtifact` is not mapped to FHIR R4B, since FHIR STU3 `ServiceDefinition` is not mapped. Element `ServiceDefinition.relatedArtifact` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). Each related resource is either an attachment, or a reference to another resource, but not both.
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(STU3: Additional documentation, citations, etc (new)) (Extension Type: RelatedArtifact)
Is Modifier	false
Must Support	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource (`hasValue() or (children().count() > id.count()) or $this is Parameters`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
44. Basic.extension:trigger
Slice Name	trigger
Definition	STU3: `ServiceDefinition.trigger` (new:TriggerDefinition)
Short	STU3: "when" the module should be invoked (new)
Comments	Element `ServiceDefinition.trigger` is not mapped to FHIR R4B, since FHIR STU3 `ServiceDefinition` is not mapped. Element `ServiceDefinition.trigger` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(STU3: "when" the module should be invoked (new)) (Extension Type: TriggerDefinition)
Is Modifier	false
Must Support	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource (`hasValue() or (children().count() > id.count()) or $this is Parameters`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
46. Basic.extension:dataRequirement
Slice Name	dataRequirement
Definition	STU3: `ServiceDefinition.dataRequirement` (new:DataRequirement)
Short	STU3: What data is used by the module (new)
Comments	Element `ServiceDefinition.dataRequirement` is not mapped to FHIR R4B, since FHIR STU3 `ServiceDefinition` is not mapped. Element `ServiceDefinition.dataRequirement` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(STU3: What data is used by the module (new)) (Extension Type: DataRequirement)
Is Modifier	false
Must Support	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource (`hasValue() or (children().count() > id.count()) or $this is Parameters`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
48. Basic.extension:operationDefinition
Slice Name	operationDefinition
Definition	STU3: `ServiceDefinition.operationDefinition` (new:Reference(OperationDefinition))
Short	STU3: Operation to invoke (new)
Comments	Element `ServiceDefinition.operationDefinition` is not mapped to FHIR R4B, since FHIR STU3 `ServiceDefinition` is not mapped. Element `ServiceDefinition.operationDefinition` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Control	0..1 This element is affected by the following invariants: ele-1
Type	Extension(STU3: Operation to invoke (new)) (Extension Type: Reference(Cross-version Profile for STU3.OperationDefinition for use in FHIR R4B, OperationDefinition))
Is Modifier	false
Must Support	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource (`hasValue() or (children().count() > id.count()) or $this is Parameters`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
50. Basic.modifierExtension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Short	ExtensionExtensions that cannot be ignored
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	true because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Must Support	false
Summary	false
Requirements	Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing	This element introduces a set of slices on `Basic.modifierExtension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
52. Basic.modifierExtension:status
Slice Name	status
Definition	STU3: `ServiceDefinition.status` (new:code)
Short	STU3: draft \| active \| retired \| unknown (new)
Comments	Element `ServiceDefinition.status` is not mapped to FHIR R4B, since FHIR STU3 `ServiceDefinition` is not mapped. Element `ServiceDefinition.status` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). Allows filtering of service definitions that are appropriate for use vs. not. This is labeled as "Is Modifier" because applications should not use a retired service definition without due consideration.
Control	1..1 This element is affected by the following invariants: ele-1
Type	Extension(STU3: draft \| active \| retired \| unknown (new)) (Extension Type: code)
Is Modifier	true because This extension is a modifier because the source element `ServiceDefinition.status` is flagged as a modifier element.
Must Support	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource (`hasValue() or (children().count() > id.count()) or $this is Parameters`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
54. Basic.modifierExtension:experimental
Slice Name	experimental
Definition	STU3: `ServiceDefinition.experimental` (new:boolean)
Short	STU3: For testing purposes, not real usage (new)
Comments	Element `ServiceDefinition.experimental` is not mapped to FHIR R4B, since FHIR STU3 `ServiceDefinition` is not mapped. Element `ServiceDefinition.experimental` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). Allows filtering of service definition that are appropriate for use vs. not. This is labeled as "Is Modifier" because applications should not use an experimental service definition in production.
Control	0..1 This element is affected by the following invariants: ele-1
Type	Extension(STU3: For testing purposes, not real usage (new)) (Extension Type: boolean)
Is Modifier	true because This extension is a modifier because the source element `ServiceDefinition.experimental` is flagged as a modifier element.
Must Support	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource (`hasValue() or (children().count() > id.count()) or $this is Parameters`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
56. Basic.code
Definition	Identifies the 'type' of resource - equivalent to the resource name for other resources.
Short	Kind of Resource
Comments	Because resource references will only be able to indicate 'Basic', the type of reference will need to be specified in a Profile identified as part of the resource. Refer to the resource notes section for information on appropriate terminologies for this code. This element is labeled as a modifier because it defines the meaning of the resource and cannot be ignored.
Control	1..1
Binding	For example codes, see BasicResourceTypeshttp://hl7.org/fhir/ValueSet/basic-resource-type\|4.3.0 (example to `http://hl7.org/fhir/ValueSet/basic-resource-type\|4.3.0`) HL7-maintained set of codes for "Basic" resources
Type	CodeableConcept
Is Modifier	true because This element determines what kind of resource is being represented which drives the meaning of all of the other elements.
Must Support	false
Summary	true
Requirements	Must be able to distinguish different types of Basic resources.
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be foundhere

0. Basic
2. Basic.extension
Control	0..*
Slicing	This element introduces a set of slices on `Basic.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
4. Basic.extension:url
Slice Name	url
Definition	STU3: `ServiceDefinition.url` (new:uri)
Short	STU3: Logical URI to reference this service definition (globally unique) (new)
Comments	Element `ServiceDefinition.url` is not mapped to FHIR R4B, since FHIR STU3 `ServiceDefinition` is not mapped. Element `ServiceDefinition.url` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). Can be a urn:uuid: or a urn:oid:, but real http: addresses are preferred. Multiple instances may share the same url if they have a distinct version.
Control	0..1
Type	Extension(STU3: Logical URI to reference this service definition (globally unique) (new)) (Extension Type: uri)
6. Basic.extension:version
Slice Name	version
Definition	STU3: `ServiceDefinition.version` (new:string)
Short	STU3: Business version of the service definition (new)
Comments	Element `ServiceDefinition.version` is not mapped to FHIR R4B, since FHIR STU3 `ServiceDefinition` is not mapped. Element `ServiceDefinition.version` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). There may be different service definition instances that have the same identifier but different versions. The version can be appended to the url in a reference to allow a refrence to a particular business version of the service definition with the format [url]\|[version].
Control	0..1
Type	Extension(STU3: Business version of the service definition (new)) (Extension Type: string)
8. Basic.extension:name
Slice Name	name
Definition	STU3: `ServiceDefinition.name` (new:string)
Short	STU3: Name for this service definition (computer friendly) (new)
Comments	Element `ServiceDefinition.name` is not mapped to FHIR R4B, since FHIR STU3 `ServiceDefinition` is not mapped. Element `ServiceDefinition.name` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). The name is not expected to be globally unique. The name should be a simple alpha-numeric type name to ensure that it is computable friendly.
Control	0..1
Type	Extension(STU3: Name for this service definition (computer friendly) (new)) (Extension Type: string)
10. Basic.extension:title
Slice Name	title
Definition	STU3: `ServiceDefinition.title` (new:string)
Short	STU3: Name for this service definition (human friendly) (new)
Comments	Element `ServiceDefinition.title` is not mapped to FHIR R4B, since FHIR STU3 `ServiceDefinition` is not mapped. Element `ServiceDefinition.title` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). This name does not need to be machine-processing friendly and may contain punctuation, white-space, etc.
Control	0..1
Type	Extension(STU3: Name for this service definition (human friendly) (new)) (Extension Type: string)
12. Basic.extension:date
Slice Name	date
Definition	STU3: `ServiceDefinition.date` (new:dateTime)
Short	STU3: Date this was last changed (new)
Comments	Element `ServiceDefinition.date` is not mapped to FHIR R4B, since FHIR STU3 `ServiceDefinition` is not mapped. Element `ServiceDefinition.date` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). Note that this is not the same as the resource last-modified-date, since the resource may be a secondary representation of the service definition. Additional specific dates may be added as extensions or be found by consulting Provenances associated with past versions of the resource.
Control	0..1
Type	Extension(STU3: Date this was last changed (new)) (Extension Type: dateTime)
14. Basic.extension:publisher
Slice Name	publisher
Definition	STU3: `ServiceDefinition.publisher` (new:string)
Short	STU3: Name of the publisher (organization or individual) (new)
Comments	Element `ServiceDefinition.publisher` is not mapped to FHIR R4B, since FHIR STU3 `ServiceDefinition` is not mapped. Element `ServiceDefinition.publisher` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). Usually an organization, but may be an individual. The publisher (or steward) of the service definition is the organization or individual primarily responsible for the maintenance and upkeep of the service definition. This is not necessarily the same individual or organization that developed and initially authored the content. The publisher is the primary point of contact for questions or issues with the service definition. This item SHOULD be populated unless the information is available from context.
Control	0..1
Type	Extension(STU3: Name of the publisher (organization or individual) (new)) (Extension Type: string)
16. Basic.extension:description
Slice Name	description
Definition	STU3: `ServiceDefinition.description` (new:markdown)
Short	STU3: Natural language description of the service definition (new)
Comments	Element `ServiceDefinition.description` is not mapped to FHIR R4B, since FHIR STU3 `ServiceDefinition` is not mapped. Element `ServiceDefinition.description` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). This description can be used to capture details such as why the service definition was built, comments about misuse, instructions for clinical use and interpretation, literature references, examples from the paper world, etc. It is not a rendering of the service definition as conveyed in the 'text' field of the resource itself. This item SHOULD be populated unless the information is available from context (e.g. the language of the profile is presumed to be the predominant language in the place the profile was created).
Control	0..1
Type	Extension(STU3: Natural language description of the service definition (new)) (Extension Type: markdown)
18. Basic.extension:purpose
Slice Name	purpose
Definition	STU3: `ServiceDefinition.purpose` (new:markdown)
Short	STU3: Why this service definition is defined (new)
Comments	Element `ServiceDefinition.purpose` is not mapped to FHIR R4B, since FHIR STU3 `ServiceDefinition` is not mapped. Element `ServiceDefinition.purpose` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). This element does not describe the usage of the service definition Instead it provides traceability of ''why'' the resource is either needed or ''why'' it is defined as it is. This may be used to point to source materials or specifications that drove the structure of this service definition.
Control	0..1
Type	Extension(STU3: Why this service definition is defined (new)) (Extension Type: markdown)
20. Basic.extension:usage
Slice Name	usage
Definition	STU3: `ServiceDefinition.usage` (new:string)
Short	STU3: Describes the clinical usage of the module (new)
Comments	Element `ServiceDefinition.usage` is not mapped to FHIR R4B, since FHIR STU3 `ServiceDefinition` is not mapped. Element `ServiceDefinition.usage` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension(STU3: Describes the clinical usage of the module (new)) (Extension Type: string)
22. Basic.extension:approvalDate
Slice Name	approvalDate
Definition	STU3: `ServiceDefinition.approvalDate` (new:date)
Short	STU3: When the service definition was approved by publisher (new)
Comments	Element `ServiceDefinition.approvalDate` is not mapped to FHIR R4B, since FHIR STU3 `ServiceDefinition` is not mapped. Element `ServiceDefinition.approvalDate` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). The 'date' element may be more recent than the approval date because of minor changes / editorial corrections.
Control	0..1
Type	Extension(STU3: When the service definition was approved by publisher (new)) (Extension Type: date)
24. Basic.extension:lastReviewDate
Slice Name	lastReviewDate
Definition	STU3: `ServiceDefinition.lastReviewDate` (new:date)
Short	STU3: When the service definition was last reviewed (new)
Comments	Element `ServiceDefinition.lastReviewDate` is not mapped to FHIR R4B, since FHIR STU3 `ServiceDefinition` is not mapped. Element `ServiceDefinition.lastReviewDate` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). If specified, this is usually after the approval date.
Control	0..1
Type	Extension(STU3: When the service definition was last reviewed (new)) (Extension Type: date)
26. Basic.extension:effectivePeriod
Slice Name	effectivePeriod
Definition	STU3: `ServiceDefinition.effectivePeriod` (new:Period)
Short	STU3: When the service definition is expected to be used (new)
Comments	Element `ServiceDefinition.effectivePeriod` is not mapped to FHIR R4B, since FHIR STU3 `ServiceDefinition` is not mapped. Element `ServiceDefinition.effectivePeriod` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). The effective period for a service definition determines when the content is applicable for usage and is independent of publication and review dates. For example, a measure intended to be used for the year 2016 might be published in 2015.
Control	0..1
Type	Extension(STU3: When the service definition is expected to be used (new)) (Extension Type: Period)
28. Basic.extension:useContext
Slice Name	useContext
Definition	STU3: `ServiceDefinition.useContext` (new:UsageContext)
Short	STU3: Context the content is intended to support (new)
Comments	Element `ServiceDefinition.useContext` is not mapped to FHIR R4B, since FHIR STU3 `ServiceDefinition` is not mapped. Element `ServiceDefinition.useContext` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). When multiple useContexts are specified, there is no expectation whether all or any of the contexts apply.
Control	0..*
Type	Extension(STU3: Context the content is intended to support (new)) (Extension Type: UsageContext)
30. Basic.extension:jurisdiction
Slice Name	jurisdiction
Definition	STU3: `ServiceDefinition.jurisdiction` (new:CodeableConcept)
Short	STU3: Intended jurisdiction for service definition (if applicable) (new)
Comments	Element `ServiceDefinition.jurisdiction` is not mapped to FHIR R4B, since FHIR STU3 `ServiceDefinition` is not mapped. Element `ServiceDefinition.jurisdiction` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). It may be possible for the service definition to be used in jurisdictions other than those for which it was originally designed or intended.
Control	0..*
Type	Extension(STU3: Intended jurisdiction for service definition (if applicable) (new)) (Extension Type: CodeableConcept)
32. Basic.extension:topic
Slice Name	topic
Definition	STU3: `ServiceDefinition.topic` (new:CodeableConcept)
Short	STU3: E.g. Education, Treatment, Assessment, etc (new)
Comments	Element `ServiceDefinition.topic` is not mapped to FHIR R4B, since FHIR STU3 `ServiceDefinition` is not mapped. Element `ServiceDefinition.topic` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension(STU3: E.g. Education, Treatment, Assessment, etc (new)) (Extension Type: CodeableConcept)
34. Basic.extension:contributor
Slice Name	contributor
Definition	STU3: `ServiceDefinition.contributor` (new:Contributor)
Short	STU3: A content contributor (new)
Comments	Element `ServiceDefinition.contributor` is not mapped to FHIR R4B, since FHIR STU3 `ServiceDefinition` is not mapped. Element `ServiceDefinition.contributor` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension(STU3: A content contributor (new)) (Extension Type: Contributor)
36. Basic.extension:contact
Slice Name	contact
Definition	STU3: `ServiceDefinition.contact` (new:ContactDetail)
Short	STU3: Contact details for the publisher (new)
Comments	Element `ServiceDefinition.contact` is not mapped to FHIR R4B, since FHIR STU3 `ServiceDefinition` is not mapped. Element `ServiceDefinition.contact` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). May be a web site, an email address, a telephone number, etc.
Control	0..*
Type	Extension(STU3: Contact details for the publisher (new)) (Extension Type: ContactDetail)
38. Basic.extension:copyright
Slice Name	copyright
Definition	STU3: `ServiceDefinition.copyright` (new:markdown)
Short	STU3: Use and/or publishing restrictions (new)
Comments	Element `ServiceDefinition.copyright` is not mapped to FHIR R4B, since FHIR STU3 `ServiceDefinition` is not mapped. Element `ServiceDefinition.copyright` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension(STU3: Use and/or publishing restrictions (new)) (Extension Type: markdown)
40. Basic.extension:relatedArtifact
Slice Name	relatedArtifact
Definition	STU3: `ServiceDefinition.relatedArtifact` (new:RelatedArtifact)
Short	STU3: Additional documentation, citations, etc (new)
Comments	Element `ServiceDefinition.relatedArtifact` is not mapped to FHIR R4B, since FHIR STU3 `ServiceDefinition` is not mapped. Element `ServiceDefinition.relatedArtifact` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). Each related resource is either an attachment, or a reference to another resource, but not both.
Control	0..*
Type	Extension(STU3: Additional documentation, citations, etc (new)) (Extension Type: RelatedArtifact)
42. Basic.extension:trigger
Slice Name	trigger
Definition	STU3: `ServiceDefinition.trigger` (new:TriggerDefinition)
Short	STU3: "when" the module should be invoked (new)
Comments	Element `ServiceDefinition.trigger` is not mapped to FHIR R4B, since FHIR STU3 `ServiceDefinition` is not mapped. Element `ServiceDefinition.trigger` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension(STU3: "when" the module should be invoked (new)) (Extension Type: TriggerDefinition)
44. Basic.extension:dataRequirement
Slice Name	dataRequirement
Definition	STU3: `ServiceDefinition.dataRequirement` (new:DataRequirement)
Short	STU3: What data is used by the module (new)
Comments	Element `ServiceDefinition.dataRequirement` is not mapped to FHIR R4B, since FHIR STU3 `ServiceDefinition` is not mapped. Element `ServiceDefinition.dataRequirement` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension(STU3: What data is used by the module (new)) (Extension Type: DataRequirement)
46. Basic.extension:operationDefinition
Slice Name	operationDefinition
Definition	STU3: `ServiceDefinition.operationDefinition` (new:Reference(OperationDefinition))
Short	STU3: Operation to invoke (new)
Comments	Element `ServiceDefinition.operationDefinition` is not mapped to FHIR R4B, since FHIR STU3 `ServiceDefinition` is not mapped. Element `ServiceDefinition.operationDefinition` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension(STU3: Operation to invoke (new)) (Extension Type: Reference(Cross-version Profile for STU3.OperationDefinition for use in FHIR R4B, OperationDefinition))
48. Basic.modifierExtension
Control	0..*
Slicing	This element introduces a set of slices on `Basic.modifierExtension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
50. Basic.modifierExtension:status
Slice Name	status
Definition	STU3: `ServiceDefinition.status` (new:code)
Short	STU3: draft \| active \| retired \| unknown (new)
Comments	Element `ServiceDefinition.status` is not mapped to FHIR R4B, since FHIR STU3 `ServiceDefinition` is not mapped. Element `ServiceDefinition.status` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). Allows filtering of service definitions that are appropriate for use vs. not. This is labeled as "Is Modifier" because applications should not use a retired service definition without due consideration.
Control	1..1
Type	Extension(STU3: draft \| active \| retired \| unknown (new)) (Extension Type: code)
52. Basic.modifierExtension:experimental
Slice Name	experimental
Definition	STU3: `ServiceDefinition.experimental` (new:boolean)
Short	STU3: For testing purposes, not real usage (new)
Comments	Element `ServiceDefinition.experimental` is not mapped to FHIR R4B, since FHIR STU3 `ServiceDefinition` is not mapped. Element `ServiceDefinition.experimental` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). Allows filtering of service definition that are appropriate for use vs. not. This is labeled as "Is Modifier" because applications should not use an experimental service definition in production.
Control	0..1
Type	Extension(STU3: For testing purposes, not real usage (new)) (Extension Type: boolean)

Guidance on how to interpret the contents of this table can be foundhere

0. Basic

Definition

Basic is used for handling concepts not yet defined in FHIR, narrative-only resources that don't map to an existing resource, and custom resources not appropriate for inclusion in the FHIR specification.

Short Resource for non-supported content

Control 0..*

Is Modifier false

Must Support false

Summary false

Alternate Names Z-resource, Extension-resource, Custom-resource

Invariants dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where(((id.exists() and ('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url)))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(uri) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())

2. Basic.id

Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

Short Logical id of this artifact

Comments

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

Control 0..1

Type

Is Modifier false

Must Support false

Summary true

4. Basic.meta

Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

Short Metadata about the resource

Control 0..1

Type

Meta

Is Modifier false

Must Support false

Summary true

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

6. Basic.implicitRules

Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

Short A set of rules under which this content was created

Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control 0..1

Type

uri

Is Modifier true because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation

Primitive Value This primitive element may be present, or absent, or replaced by an extension

Must Support false

Summary true

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

8. Basic.language

Definition

The base language in which the resource is written.

Short Language of the resource content

Comments

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

Control 0..1

Binding

The codes SHOULD be taken from CommonLanguages
(preferred to http://hl7.org/fhir/ValueSet/languages|4.3.0)

IETF language tag

Additional Bindings

Purpose

Is Modifier false

Primitive Value This primitive element may be present, or absent, or replaced by an extension

Must Support false

Summary false

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

10. Basic.text

Definition

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

Short Text summary of the resource, for human interpretation

Comments

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

Control 0..1

Type

Narrative

Is Modifier false

Must Support false

Summary false

Alternate Names narrative, html, xhtml, display

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

12. Basic.contained

Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

Short Contained, inline Resources

Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

Control 0..*

Type

Resource

Is Modifier false

Must Support false

Summary false

Alternate Names inline resources, anonymous resources, contained resources

Invariants dom-r4b: Containing new R4B resources within R4 resources may cause interoperability issues if instances are shared with R4 systems (($this is Citation or $this is Evidence or $this is EvidenceReport or $this is EvidenceVariable or $this is MedicinalProductDefinition or $this is PackagedProductDefinition or $this is AdministrableProductDefinition or $this is Ingredient or $this is ClinicalUseDefinition or $this is RegulatedAuthorization or $this is SubstanceDefinition or $this is SubscriptionStatus or $this is SubscriptionTopic) implies (%resource is Citation or %resource is Evidence or %resource is EvidenceReport or %resource is EvidenceVariable or %resource is MedicinalProductDefinition or %resource is PackagedProductDefinition or %resource is AdministrableProductDefinition or %resource is Ingredient or %resource is ClinicalUseDefinition or %resource is RegulatedAuthorization or %resource is SubstanceDefinition or %resource is SubscriptionStatus or %resource is SubscriptionTopic))

14. Basic.extension

Definition

An Extension

Short Extension

Control 0..*

Type

Extension

Is Modifier false

Must Support false

Summary false

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())

Slicing

This element introduces a set of slices on Basic.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:

value @ url

16. Basic.extension:url

Slice Name url

Definition

STU3: ServiceDefinition.url (new:uri)

Short STU3: Logical URI to reference this service definition (globally unique) (new)

Comments

Element ServiceDefinition.url is not mapped to FHIR R4B, since FHIR STU3 ServiceDefinition is not mapped. Element ServiceDefinition.url has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). Can be a urn:uuid: or a urn:oid:, but real http: addresses are preferred. Multiple instances may share the same url if they have a distinct version.

Control 0..1
This element is affected by the following invariants: ele-1

Type Extension(STU3: Logical URI to reference this service definition (globally unique) (new)) (Extension Type: uri)

Is Modifier false

Must Support false

Summary false

Invariants ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource (hasValue() or (children().count() > id.count()) or $this is Parameters)
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())

18. Basic.extension:version

Slice Name version

Definition

STU3: ServiceDefinition.version (new:string)

Short STU3: Business version of the service definition (new)

Comments

Element ServiceDefinition.version is not mapped to FHIR R4B, since FHIR STU3 ServiceDefinition is not mapped. Element ServiceDefinition.version has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). There may be different service definition instances that have the same identifier but different versions. The version can be appended to the url in a reference to allow a refrence to a particular business version of the service definition with the format [url]|[version].

Control 0..1
This element is affected by the following invariants: ele-1

Type Extension(STU3: Business version of the service definition (new)) (Extension Type: string)

Is Modifier false

Must Support false

Summary false

20. Basic.extension:name

Slice Name name

Definition

STU3: ServiceDefinition.name (new:string)

Short STU3: Name for this service definition (computer friendly) (new)

Comments

Element ServiceDefinition.name is not mapped to FHIR R4B, since FHIR STU3 ServiceDefinition is not mapped. Element ServiceDefinition.name has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). The name is not expected to be globally unique. The name should be a simple alpha-numeric type name to ensure that it is computable friendly.

Control 0..1
This element is affected by the following invariants: ele-1

Type Extension(STU3: Name for this service definition (computer friendly) (new)) (Extension Type: string)

Is Modifier false

Must Support false

Summary false

22. Basic.extension:title

Slice Name title

Definition

STU3: ServiceDefinition.title (new:string)

Short STU3: Name for this service definition (human friendly) (new)

Comments

Element ServiceDefinition.title is not mapped to FHIR R4B, since FHIR STU3 ServiceDefinition is not mapped. Element ServiceDefinition.title has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). This name does not need to be machine-processing friendly and may contain punctuation, white-space, etc.

Control 0..1
This element is affected by the following invariants: ele-1

Type Extension(STU3: Name for this service definition (human friendly) (new)) (Extension Type: string)

Is Modifier false

Must Support false

Summary false

24. Basic.extension:date

Slice Name date

Definition

STU3: ServiceDefinition.date (new:dateTime)

Short STU3: Date this was last changed (new)

Comments

Element ServiceDefinition.date is not mapped to FHIR R4B, since FHIR STU3 ServiceDefinition is not mapped. Element ServiceDefinition.date has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). Note that this is not the same as the resource last-modified-date, since the resource may be a secondary representation of the service definition. Additional specific dates may be added as extensions or be found by consulting Provenances associated with past versions of the resource.

Control 0..1
This element is affected by the following invariants: ele-1

Type Extension(STU3: Date this was last changed (new)) (Extension Type: dateTime)

Is Modifier false

Must Support false

Summary false

26. Basic.extension:publisher

Slice Name publisher

Definition

STU3: ServiceDefinition.publisher (new:string)

Short STU3: Name of the publisher (organization or individual) (new)

Comments

Element ServiceDefinition.publisher is not mapped to FHIR R4B, since FHIR STU3 ServiceDefinition is not mapped. Element ServiceDefinition.publisher has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). Usually an organization, but may be an individual. The publisher (or steward) of the service definition is the organization or individual primarily responsible for the maintenance and upkeep of the service definition. This is not necessarily the same individual or organization that developed and initially authored the content. The publisher is the primary point of contact for questions or issues with the service definition. This item SHOULD be populated unless the information is available from context.

Control 0..1
This element is affected by the following invariants: ele-1

Type Extension(STU3: Name of the publisher (organization or individual) (new)) (Extension Type: string)

Is Modifier false

Must Support false

Summary false

28. Basic.extension:description

Slice Name description

Definition

STU3: ServiceDefinition.description (new:markdown)

Short STU3: Natural language description of the service definition (new)

Comments

Element ServiceDefinition.description is not mapped to FHIR R4B, since FHIR STU3 ServiceDefinition is not mapped. Element ServiceDefinition.description has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). This description can be used to capture details such as why the service definition was built, comments about misuse, instructions for clinical use and interpretation, literature references, examples from the paper world, etc. It is not a rendering of the service definition as conveyed in the 'text' field of the resource itself. This item SHOULD be populated unless the information is available from context (e.g. the language of the profile is presumed to be the predominant language in the place the profile was created).

Control 0..1
This element is affected by the following invariants: ele-1

Type Extension(STU3: Natural language description of the service definition (new)) (Extension Type: markdown)

Is Modifier false

Must Support false

Summary false

30. Basic.extension:purpose

Slice Name purpose

Definition

STU3: ServiceDefinition.purpose (new:markdown)

Short STU3: Why this service definition is defined (new)

Comments

Element ServiceDefinition.purpose is not mapped to FHIR R4B, since FHIR STU3 ServiceDefinition is not mapped. Element ServiceDefinition.purpose has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). This element does not describe the usage of the service definition Instead it provides traceability of ''why'' the resource is either needed or ''why'' it is defined as it is. This may be used to point to source materials or specifications that drove the structure of this service definition.

Control 0..1
This element is affected by the following invariants: ele-1

Type Extension(STU3: Why this service definition is defined (new)) (Extension Type: markdown)

Is Modifier false

Must Support false

Summary false

32. Basic.extension:usage

Slice Name usage

Definition

STU3: ServiceDefinition.usage (new:string)

Short STU3: Describes the clinical usage of the module (new)

Comments

Element ServiceDefinition.usage is not mapped to FHIR R4B, since FHIR STU3 ServiceDefinition is not mapped. Element ServiceDefinition.usage has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).

Control 0..1
This element is affected by the following invariants: ele-1

Type Extension(STU3: Describes the clinical usage of the module (new)) (Extension Type: string)

Is Modifier false

Must Support false

Summary false

34. Basic.extension:approvalDate

Slice Name approvalDate

Definition

STU3: ServiceDefinition.approvalDate (new:date)

Short STU3: When the service definition was approved by publisher (new)

Comments

Element ServiceDefinition.approvalDate is not mapped to FHIR R4B, since FHIR STU3 ServiceDefinition is not mapped. Element ServiceDefinition.approvalDate has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). The 'date' element may be more recent than the approval date because of minor changes / editorial corrections.

Control 0..1
This element is affected by the following invariants: ele-1

Type Extension(STU3: When the service definition was approved by publisher (new)) (Extension Type: date)

Is Modifier false

Must Support false

Summary false

36. Basic.extension:lastReviewDate

Slice Name lastReviewDate

Definition

STU3: ServiceDefinition.lastReviewDate (new:date)

Short STU3: When the service definition was last reviewed (new)

Comments

Element ServiceDefinition.lastReviewDate is not mapped to FHIR R4B, since FHIR STU3 ServiceDefinition is not mapped. Element ServiceDefinition.lastReviewDate has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). If specified, this is usually after the approval date.

Control 0..1
This element is affected by the following invariants: ele-1

Type Extension(STU3: When the service definition was last reviewed (new)) (Extension Type: date)

Is Modifier false

Must Support false

Summary false

38. Basic.extension:effectivePeriod

Slice Name effectivePeriod

Definition

STU3: ServiceDefinition.effectivePeriod (new:Period)

Short STU3: When the service definition is expected to be used (new)

Comments

Element ServiceDefinition.effectivePeriod is not mapped to FHIR R4B, since FHIR STU3 ServiceDefinition is not mapped. Element ServiceDefinition.effectivePeriod has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). The effective period for a service definition determines when the content is applicable for usage and is independent of publication and review dates. For example, a measure intended to be used for the year 2016 might be published in 2015.

Control 0..1
This element is affected by the following invariants: ele-1

Type Extension(STU3: When the service definition is expected to be used (new)) (Extension Type: Period)

Is Modifier false

Must Support false

Summary false

40. Basic.extension:useContext

Slice Name useContext

Definition

STU3: ServiceDefinition.useContext (new:UsageContext)

Short STU3: Context the content is intended to support (new)

Comments

Element ServiceDefinition.useContext is not mapped to FHIR R4B, since FHIR STU3 ServiceDefinition is not mapped. Element ServiceDefinition.useContext has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). When multiple useContexts are specified, there is no expectation whether all or any of the contexts apply.

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(STU3: Context the content is intended to support (new)) (Extension Type: UsageContext)

Is Modifier false

Must Support false

Summary false

42. Basic.extension:jurisdiction

Slice Name jurisdiction

Definition

STU3: ServiceDefinition.jurisdiction (new:CodeableConcept)

Short STU3: Intended jurisdiction for service definition (if applicable) (new)

Comments

Element ServiceDefinition.jurisdiction is not mapped to FHIR R4B, since FHIR STU3 ServiceDefinition is not mapped. Element ServiceDefinition.jurisdiction has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). It may be possible for the service definition to be used in jurisdictions other than those for which it was originally designed or intended.

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(STU3: Intended jurisdiction for service definition (if applicable) (new)) (Extension Type: CodeableConcept)

Is Modifier false

Must Support false

Summary false

44. Basic.extension:topic

Slice Name topic

Definition

STU3: ServiceDefinition.topic (new:CodeableConcept)

Short STU3: E.g. Education, Treatment, Assessment, etc (new)

Comments

Element ServiceDefinition.topic is not mapped to FHIR R4B, since FHIR STU3 ServiceDefinition is not mapped. Element ServiceDefinition.topic has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(STU3: E.g. Education, Treatment, Assessment, etc (new)) (Extension Type: CodeableConcept)

Is Modifier false

Must Support false

Summary false

46. Basic.extension:contributor

Slice Name contributor

Definition

STU3: ServiceDefinition.contributor (new:Contributor)

Short STU3: A content contributor (new)

Comments

Element ServiceDefinition.contributor is not mapped to FHIR R4B, since FHIR STU3 ServiceDefinition is not mapped. Element ServiceDefinition.contributor has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(STU3: A content contributor (new)) (Extension Type: Contributor)

Is Modifier false

Must Support false

Summary false

48. Basic.extension:contact

Slice Name contact

Definition

STU3: ServiceDefinition.contact (new:ContactDetail)

Short STU3: Contact details for the publisher (new)

Comments

Element ServiceDefinition.contact is not mapped to FHIR R4B, since FHIR STU3 ServiceDefinition is not mapped. Element ServiceDefinition.contact has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). May be a web site, an email address, a telephone number, etc.

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(STU3: Contact details for the publisher (new)) (Extension Type: ContactDetail)

Is Modifier false

Must Support false

Summary false

50. Basic.extension:copyright

Slice Name copyright

Definition

STU3: ServiceDefinition.copyright (new:markdown)

Short STU3: Use and/or publishing restrictions (new)

Comments

Element ServiceDefinition.copyright is not mapped to FHIR R4B, since FHIR STU3 ServiceDefinition is not mapped. Element ServiceDefinition.copyright has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).

Control 0..1
This element is affected by the following invariants: ele-1

Type Extension(STU3: Use and/or publishing restrictions (new)) (Extension Type: markdown)

Is Modifier false

Must Support false

Summary false

52. Basic.extension:relatedArtifact

Slice Name relatedArtifact

Definition

STU3: ServiceDefinition.relatedArtifact (new:RelatedArtifact)

Short STU3: Additional documentation, citations, etc (new)

Comments

Element ServiceDefinition.relatedArtifact is not mapped to FHIR R4B, since FHIR STU3 ServiceDefinition is not mapped. Element ServiceDefinition.relatedArtifact has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). Each related resource is either an attachment, or a reference to another resource, but not both.

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(STU3: Additional documentation, citations, etc (new)) (Extension Type: RelatedArtifact)

Is Modifier false

Must Support false

Summary false

54. Basic.extension:trigger

Slice Name trigger

Definition

STU3: ServiceDefinition.trigger (new:TriggerDefinition)

Short STU3: "when" the module should be invoked (new)

Comments

Element ServiceDefinition.trigger is not mapped to FHIR R4B, since FHIR STU3 ServiceDefinition is not mapped. Element ServiceDefinition.trigger has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(STU3: "when" the module should be invoked (new)) (Extension Type: TriggerDefinition)

Is Modifier false

Must Support false

Summary false

56. Basic.extension:dataRequirement

Slice Name dataRequirement

Definition

STU3: ServiceDefinition.dataRequirement (new:DataRequirement)

Short STU3: What data is used by the module (new)

Comments

Element ServiceDefinition.dataRequirement is not mapped to FHIR R4B, since FHIR STU3 ServiceDefinition is not mapped. Element ServiceDefinition.dataRequirement has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(STU3: What data is used by the module (new)) (Extension Type: DataRequirement)

Is Modifier false

Must Support false

Summary false

58. Basic.extension:operationDefinition

Slice Name operationDefinition

Definition

STU3: ServiceDefinition.operationDefinition (new:Reference(OperationDefinition))

Short STU3: Operation to invoke (new)

Comments

Element ServiceDefinition.operationDefinition is not mapped to FHIR R4B, since FHIR STU3 ServiceDefinition is not mapped. Element ServiceDefinition.operationDefinition has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).

Control 0..1
This element is affected by the following invariants: ele-1

Type Extension(STU3: Operation to invoke (new)) (Extension Type: Reference(Cross-version Profile for STU3.OperationDefinition for use in FHIR R4B, OperationDefinition))

Is Modifier false

Must Support false

Summary false

60. Basic.modifierExtension

Definition

An Extension

Short Extension

Control 0..*

Type

Extension

Is Modifier true because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them

Must Support false

Summary false

Slicing

This element introduces a set of slices on Basic.modifierExtension. The slices areUnordered and Open, and can be differentiated using the following discriminators:

value @ url

62. Basic.modifierExtension:status

Slice Name status

Definition

STU3: ServiceDefinition.status (new:code)

Short STU3: draft | active | retired | unknown (new)

Comments

Element ServiceDefinition.status is not mapped to FHIR R4B, since FHIR STU3 ServiceDefinition is not mapped. Element ServiceDefinition.status has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). Allows filtering of service definitions that are appropriate for use vs. not.
This is labeled as "Is Modifier" because applications should not use a retired service definition without due consideration.

Control 1..1
This element is affected by the following invariants: ele-1

Type Extension(STU3: draft | active | retired | unknown (new)) (Extension Type: code)

Is Modifier true because This extension is a modifier because the source element `ServiceDefinition.status` is flagged as a modifier element.

Must Support false

Summary false

64. Basic.modifierExtension:experimental

Slice Name experimental

Definition

STU3: ServiceDefinition.experimental (new:boolean)

Short STU3: For testing purposes, not real usage (new)

Comments

Element ServiceDefinition.experimental is not mapped to FHIR R4B, since FHIR STU3 ServiceDefinition is not mapped. Element ServiceDefinition.experimental has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). Allows filtering of service definition that are appropriate for use vs. not. This is labeled as "Is Modifier" because applications should not use an experimental service definition in production.

Control 0..1
This element is affected by the following invariants: ele-1

Type Extension(STU3: For testing purposes, not real usage (new)) (Extension Type: boolean)

Is Modifier true because This extension is a modifier because the source element `ServiceDefinition.experimental` is flagged as a modifier element.

Must Support false

Summary false

66. Basic.identifier

Definition

Identifier assigned to the resource for business purposes, outside the context of FHIR.

Short Business identifier

Note This is a business identifier, not a resource identifier (see discussion)

Control 0..*

Type

Identifier

Is Modifier false

Must Support false

Summary true

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

68. Basic.code

Definition

Identifies the 'type' of resource - equivalent to the resource name for other resources.

Short Kind of Resource

Comments

Because resource references will only be able to indicate 'Basic', the type of reference will need to be specified in a Profile identified as part of the resource. Refer to the resource notes section for information on appropriate terminologies for this code.

This element is labeled as a modifier because it defines the meaning of the resource and cannot be ignored.

Control 1..1

Binding

For example codes, see BasicResourceTypes
(example to http://hl7.org/fhir/ValueSet/basic-resource-type|4.3.0)

HL7-maintained set of codes for "Basic" resources

Type

CodeableConcept

Is Modifier true because This element determines what kind of resource is being represented which drives the meaning of all of the other elements.

Must Support false

Summary true

Requirements

Must be able to distinguish different types of Basic resources.

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

70. Basic.subject

Definition

Identifies the patient, practitioner, device or any other resource that is the "focus" of this resource.

Short Identifies the focus of this resource

Comments

Optional as not all potential resources will have subjects. Resources associated with multiple subjects can handle this via extension.

Control 0..1

Type Reference(Resource)

Is Modifier false

Must Support false

Summary true

Requirements

Needed for partitioning the resource by Patient.

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

72. Basic.created

Definition

Identifies when the resource was first created.

Short When created

Control 0..1

Type

date

Is Modifier false

Primitive Value This primitive element may be present, or absent, or replaced by an extension

Must Support false

Summary true

Requirements

Allows ordering resource instances by time.

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

74. Basic.author

Definition

Indicates who was responsible for creating the resource instance.

Short Who created

Control 0..1

Type Reference(Practitioner, PractitionerRole, Patient, RelatedPerson, Organization)

Is Modifier false

Must Support false

Summary true

Requirements

Needed for partitioning the resource.

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))