Describes the event of a patient being administered a vaccine or a record of an immunization as reported by a patient, a clinician or another party.

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

An Extension

STU3: Immunization.notGiven additional types (boolean) additional types from child elements (value)

Element Immunization.notGiven is mapped to FHIR R4B element Immunization.status as SourceIsBroaderThanTarget. Element Immunization.notGiven is mapped to FHIR R4B element Immunization.statusReason as SourceIsBroaderThanTarget. The mappings for Immunization.notGiven do not cover the following types: boolean. The mappings for Immunization.notGiven do not cover the following types based on type expansion: value. This element is labeled as a modifier because it indicates that an immunization didn't happen.

Indicates the current status of the immunization event.

Will generally be set to show that the immunization has been completed or not done. This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

Vaccine that was administered or was to be administered.

The patient who either received or did not receive the immunization.

An Extension

STU3: Immunization.patient additional types from child elements (display, identifier, reference)

Element Immunization.patient is mapped to FHIR R4B element Immunization.patient as SourceIsBroaderThanTarget. The mappings for Immunization.patient do not cover the following types based on type expansion: display, identifier, reference. The standard extension alternate-reference has been mapped as the representation of FHIR STU3 element Immunization.patient with unmapped reference targets: Patient.

Date vaccine administered or was to be administered.

When immunizations are given a specific date and time should always be known. When immunizations are patient reported, a specific date might not be known. Although partial dates are allowed, an adult patient might not be able to recall the year a childhood immunization was given. An exact date is always preferable, but the use of the String data type is acceptable when an exact date is not known. A small number of vaccines (e.g. live oral typhoid vaccine) are given as a series of patient self-administered dose over a span of time. In cases like this, often, only the first dose (typically a provider supervised dose) is recorded with the occurrence indicating the date/time of the first dose.

Indication if a dose is considered to be subpotent. By default, a dose should be considered to be potent.

Typically, the recognition of the dose being sub-potent is retrospective, after the administration (ex. notification of a manufacturer recall after administration). However, in the case of a partial administration (the patient moves unexpectedly and only some of the dose is actually administered), subpotency may be recognized immediately, but it is still important to record the event.

STU3: Immunization.meta additional types (Meta) additional types from child elements (lastUpdated, profile, security, tag, versionId)

Element Immunization.meta is mapped to FHIR R4B element Immunization.meta as SourceIsBroaderThanTarget. The mappings for Immunization.meta do not cover the following types: Meta. The mappings for Immunization.meta do not cover the following types based on type expansion: lastUpdated, profile, security, tag, versionId.

STU3: Immunization.text additional types (Narrative) additional types from child elements (div, status)

Element Immunization.text is mapped to FHIR R4B element Immunization.text as SourceIsBroaderThanTarget. The mappings for Immunization.text do not cover the following types: Narrative. The mappings for Immunization.text do not cover the following types based on type expansion: div, status. Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded in formation is added later.

STU3: Immunization.notGiven additional types (boolean) additional types from child elements (value)

Element Immunization.notGiven is mapped to FHIR R4B element Immunization.status as SourceIsBroaderThanTarget. Element Immunization.notGiven is mapped to FHIR R4B element Immunization.statusReason as SourceIsBroaderThanTarget. The mappings for Immunization.notGiven do not cover the following types: boolean. The mappings for Immunization.notGiven do not cover the following types based on type expansion: value. This element is labeled as a modifier because it indicates that an immunization didn't happen.

STU3: Immunization.identifier additional types (Identifier) additional types from child elements (assigner, period, system, type, use, value)

Element Immunization.identifier is mapped to FHIR R4B element Immunization.identifier as SourceIsBroaderThanTarget. The mappings for Immunization.identifier do not cover the following types: Identifier. The mappings for Immunization.identifier do not cover the following types based on type expansion: assigner, period, system, type, use, value.

STU3: Immunization.patient additional types from child elements (display, identifier, reference)

Element Immunization.patient is mapped to FHIR R4B element Immunization.patient as SourceIsBroaderThanTarget. The mappings for Immunization.patient do not cover the following types based on type expansion: display, identifier, reference. The standard extension alternate-reference has been mapped as the representation of FHIR STU3 element Immunization.patient with unmapped reference targets: Patient.

STU3: Immunization.encounter additional types from child elements (display, identifier, reference)

Element Immunization.encounter is mapped to FHIR R4B element Immunization.encounter as SourceIsBroaderThanTarget. The mappings for Immunization.encounter do not cover the following types based on type expansion: display, identifier, reference. The standard extension alternate-reference has been mapped as the representation of FHIR STU3 element Immunization.encounter with unmapped reference targets: Encounter.

STU3: Immunization.location additional types from child elements (display, identifier, reference)

Element Immunization.location is mapped to FHIR R4B element Immunization.location as SourceIsBroaderThanTarget. The mappings for Immunization.location do not cover the following types based on type expansion: display, identifier, reference. The standard extension alternate-reference has been mapped as the representation of FHIR STU3 element Immunization.location with unmapped reference targets: Location.

STU3: Immunization.manufacturer additional types from child elements (display, identifier, reference)

Element Immunization.manufacturer is mapped to FHIR R4B element Immunization.manufacturer as SourceIsBroaderThanTarget. The mappings for Immunization.manufacturer do not cover the following types based on type expansion: display, identifier, reference. The standard extension alternate-reference has been mapped as the representation of FHIR STU3 element Immunization.manufacturer with unmapped reference targets: Organization.

STU3: Immunization.practitioner.actor additional types from child elements (display, identifier, reference)

Element Immunization.practitioner.actor is mapped to FHIR R4B element Immunization.performer.actor as SourceIsBroaderThanTarget. The mappings for Immunization.practitioner.actor do not cover the following types based on type expansion: display, identifier, reference. The standard extension alternate-reference has been mapped as the representation of FHIR STU3 element Immunization.practitioner.actor with unmapped reference targets: Practitioner.

STU3: Immunization.note additional types (Annotation) additional types from child elements (author[x], text, time)

Element Immunization.note is mapped to FHIR R4B element Immunization.note as SourceIsBroaderThanTarget. The mappings for Immunization.note do not cover the following types: Annotation. The mappings for Immunization.note do not cover the following types based on type expansion: author[x], text, time.

STU3: Immunization.reaction.detail additional types from child elements (display, identifier, reference)

Element Immunization.reaction.detail is mapped to FHIR R4B element Immunization.reaction.detail as SourceIsBroaderThanTarget. The mappings for Immunization.reaction.detail do not cover the following types based on type expansion: display, identifier, reference. The standard extension alternate-reference has been mapped as the representation of FHIR STU3 element Immunization.reaction.detail with unmapped reference targets: Observation.

STU3: Immunization.vaccinationProtocol.description (new:string)

Element Immunization.vaccinationProtocol.description has a context of Immunization.protocolApplied based on following the parent source element upwards and mapping to Immunization. Element Immunization.vaccinationProtocol.description has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).

STU3: Immunization.vaccinationProtocol.doseStatus (new:CodeableConcept)

Element Immunization.vaccinationProtocol.doseStatus has a context of Immunization.protocolApplied based on following the parent source element upwards and mapping to Immunization. Element Immunization.vaccinationProtocol.doseStatus has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). May need to differentiate between status declarations by a provider vs. a CDS engine.

STU3: Immunization.vaccinationProtocol.doseStatusReason (new:CodeableConcept)

Element Immunization.vaccinationProtocol.doseStatusReason has a context of Immunization.protocolApplied based on following the parent source element upwards and mapping to Immunization. Element Immunization.vaccinationProtocol.doseStatusReason has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).

STU3: Immunization.vaccinationProtocol.authority additional types from child elements (display, identifier, reference)

Element Immunization.vaccinationProtocol.authority is mapped to FHIR R4B element Immunization.protocolApplied.authority as SourceIsBroaderThanTarget. The mappings for Immunization.vaccinationProtocol.authority do not cover the following types based on type expansion: display, identifier, reference. The standard extension alternate-reference has been mapped as the representation of FHIR STU3 element Immunization.vaccinationProtocol.authority with unmapped reference targets: Organization.

Describes the event of a patient being administered a vaccine or a record of an immunization as reported by a patient, a clinician or another party.

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

An Extension

STU3: Immunization.meta additional types (Meta) additional types from child elements (lastUpdated, profile, security, tag, versionId)

Element Immunization.meta is mapped to FHIR R4B element Immunization.meta as SourceIsBroaderThanTarget. The mappings for Immunization.meta do not cover the following types: Meta. The mappings for Immunization.meta do not cover the following types based on type expansion: lastUpdated, profile, security, tag, versionId.

The version specific identifier, as it appears in the version portion of the URL. This value changes when the resource is created, updated, or deleted.

The server assigns this value, and ignores what the client specifies, except in the case that the server is imposing version integrity on updates/deletes.

When the resource last changed - e.g. when the version changed.

This value is always populated except when the resource is first being created. The server / resource manager sets this value; what a client provides is irrelevant. This is equivalent to the HTTP Last-Modified and SHOULD have the same value on a read interaction.

A uri that identifies the source system of the resource. This provides a minimal amount of Provenance information that can be used to track or differentiate the source of information in the resource. The source may identify another FHIR server, document, message, database, etc.

In the provenance resource, this corresponds to Provenance.entity.what[x]. The exact use of the source (and the implied Provenance.entity.role) is left to implementer discretion. Only one nominated source is allowed; for additional provenance details, a full Provenance resource should be used.

This element can be used to indicate where the current master source of a resource that has a canonical URL if the resource is no longer hosted at the canonical URL.

A list of profiles (references to StructureDefinition resources) that this resource claims to conform to. The URL is a reference to StructureDefinition.url.

It is up to the server and/or other infrastructure of policy to determine whether/how these claims are verified and/or updated over time. The list of profile URLs is a set.

Security labels applied to this resource. These tags connect specific resources to the overall security policy and infrastructure.

The security labels can be updated without changing the stated version of the resource. The list of security labels is a set. Uniqueness is based the system/code, and version and display are ignored.

Tags applied to this resource. Tags are intended to be used to identify and relate resources to process and workflow, and applications are not required to consider the tags when interpreting the meaning of a resource.

The tags can be updated without changing the stated version of the resource. The list of tags is a set. Uniqueness is based the system/code, and version and display are ignored.

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

The base language in which the resource is written.

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

IETF language tag

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

An Extension

STU3: Immunization.text additional types (Narrative) additional types from child elements (div, status)

Element Immunization.text is mapped to FHIR R4B element Immunization.text as SourceIsBroaderThanTarget. The mappings for Immunization.text do not cover the following types: Narrative. The mappings for Immunization.text do not cover the following types based on type expansion: div, status. Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded in formation is added later.

The status of the narrative - whether it's entirely generated (from just the defined data or the extensions too), or whether a human authored it and it may contain additional data.

The actual narrative content, a stripped down version of XHTML.

The contents of the html element are an XHTML fragment containing only the basic html formatting elements described in chapters 7-11 and 15 of the HTML 4.0 standard, <a> elements (either name or href), images and internally contained stylesheets. The XHTML content SHALL NOT contain a head, a body, external stylesheet references, scripts, forms, base/link/xlink, frames, iframes and objects.

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

An Extension

STU3: Immunization.notGiven additional types (boolean) additional types from child elements (value)

Element Immunization.notGiven is mapped to FHIR R4B element Immunization.status as SourceIsBroaderThanTarget. Element Immunization.notGiven is mapped to FHIR R4B element Immunization.statusReason as SourceIsBroaderThanTarget. The mappings for Immunization.notGiven do not cover the following types: boolean. The mappings for Immunization.notGiven do not cover the following types based on type expansion: value. This element is labeled as a modifier because it indicates that an immunization didn't happen.

A unique identifier assigned to this immunization record.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

An Extension

STU3: Immunization.identifier additional types (Identifier) additional types from child elements (assigner, period, system, type, use, value)

Element Immunization.identifier is mapped to FHIR R4B element Immunization.identifier as SourceIsBroaderThanTarget. The mappings for Immunization.identifier do not cover the following types: Identifier. The mappings for Immunization.identifier do not cover the following types based on type expansion: assigner, period, system, type, use, value.

The purpose of this identifier.

Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

Allows users to make use of identifiers when the identifier system is not known.

Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

Identifier.system is always case sensitive.

There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

The portion of the identifier typically relevant to the user and which is unique within the context of the system.

If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

Time period during which identifier is/was valid for use.

Organization that issued/manages the identifier.

The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

Indicates the current status of the immunization event.

Will generally be set to show that the immunization has been completed or not done. This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

Indicates the reason the immunization event was not performed.

This is generally only used for the status of "not-done". The reason for performing the immunization event is captured in reasonCode, not here.

Vaccine that was administered or was to be administered.

The patient who either received or did not receive the immunization.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

An Extension

STU3: Immunization.patient additional types from child elements (display, identifier, reference)

Element Immunization.patient is mapped to FHIR R4B element Immunization.patient as SourceIsBroaderThanTarget. The mappings for Immunization.patient do not cover the following types based on type expansion: display, identifier, reference. The standard extension alternate-reference has been mapped as the representation of FHIR STU3 element Immunization.patient with unmapped reference targets: Patient.

A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

Plain text narrative that identifies the resource in addition to the resource reference.

This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

The visit or admission or other contact between patient and health care provider the immunization was performed as part of.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

An Extension

STU3: Immunization.encounter additional types from child elements (display, identifier, reference)

Element Immunization.encounter is mapped to FHIR R4B element Immunization.encounter as SourceIsBroaderThanTarget. The mappings for Immunization.encounter do not cover the following types based on type expansion: display, identifier, reference. The standard extension alternate-reference has been mapped as the representation of FHIR STU3 element Immunization.encounter with unmapped reference targets: Encounter.

A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

Plain text narrative that identifies the resource in addition to the resource reference.

This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

Date vaccine administered or was to be administered.

When immunizations are given a specific date and time should always be known. When immunizations are patient reported, a specific date might not be known. Although partial dates are allowed, an adult patient might not be able to recall the year a childhood immunization was given. An exact date is always preferable, but the use of the String data type is acceptable when an exact date is not known. A small number of vaccines (e.g. live oral typhoid vaccine) are given as a series of patient self-administered dose over a span of time. In cases like this, often, only the first dose (typically a provider supervised dose) is recorded with the occurrence indicating the date/time of the first dose.

The date the occurrence of the immunization was first captured in the record - potentially significantly after the occurrence of the event.

An indication that the content of the record is based on information from the person who administered the vaccine. This reflects the context under which the data was originally recorded.

Reflects the “reliability” of the content.

The source of the data when the report of the immunization event is not based on information from the person who administered the vaccine.

Should not be populated if primarySource = True, not required even if primarySource = False.

The service delivery location where the vaccine administration occurred.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

An Extension

STU3: Immunization.location additional types from child elements (display, identifier, reference)

Element Immunization.location is mapped to FHIR R4B element Immunization.location as SourceIsBroaderThanTarget. The mappings for Immunization.location do not cover the following types based on type expansion: display, identifier, reference. The standard extension alternate-reference has been mapped as the representation of FHIR STU3 element Immunization.location with unmapped reference targets: Location.

A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

Plain text narrative that identifies the resource in addition to the resource reference.

This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

Name of vaccine manufacturer.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

An Extension

STU3: Immunization.manufacturer additional types from child elements (display, identifier, reference)

Element Immunization.manufacturer is mapped to FHIR R4B element Immunization.manufacturer as SourceIsBroaderThanTarget. The mappings for Immunization.manufacturer do not cover the following types based on type expansion: display, identifier, reference. The standard extension alternate-reference has been mapped as the representation of FHIR STU3 element Immunization.manufacturer with unmapped reference targets: Organization.

A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

Plain text narrative that identifies the resource in addition to the resource reference.

This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

Lot number of the vaccine product.

Date vaccine batch expires.

Body site where vaccine was administered.

The path by which the vaccine product is taken into the body.

The quantity of vaccine product that was administered.

Indicates who performed the immunization event.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Describes the type of performance (e.g. ordering provider, administering provider, etc.).

The practitioner or organization who performed the action.

When the individual practitioner who performed the action is known, it is best to send.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

An Extension

STU3: Immunization.practitioner.actor additional types from child elements (display, identifier, reference)

Element Immunization.practitioner.actor is mapped to FHIR R4B element Immunization.performer.actor as SourceIsBroaderThanTarget. The mappings for Immunization.practitioner.actor do not cover the following types based on type expansion: display, identifier, reference. The standard extension alternate-reference has been mapped as the representation of FHIR STU3 element Immunization.practitioner.actor with unmapped reference targets: Practitioner.

A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

Plain text narrative that identifies the resource in addition to the resource reference.

This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

Extra information about the immunization that is not conveyed by the other attributes.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

An Extension

STU3: Immunization.note additional types (Annotation) additional types from child elements (author[x], text, time)

Element Immunization.note is mapped to FHIR R4B element Immunization.note as SourceIsBroaderThanTarget. The mappings for Immunization.note do not cover the following types: Annotation. The mappings for Immunization.note do not cover the following types based on type expansion: author[x], text, time.

The individual responsible for making the annotation.

Organization is used when there's no need for specific attribution as to who made the comment.

Indicates when this particular annotation was made.

The text of the annotation in markdown format.

Reasons why the vaccine was administered.

Condition, Observation or DiagnosticReport that supports why the immunization was administered.

Indication if a dose is considered to be subpotent. By default, a dose should be considered to be potent.

Typically, the recognition of the dose being sub-potent is retrospective, after the administration (ex. notification of a manufacturer recall after administration). However, in the case of a partial administration (the patient moves unexpectedly and only some of the dose is actually administered), subpotency may be recognized immediately, but it is still important to record the event.

Reason why a dose is considered to be subpotent.

The reason why a dose is considered to be subpotent.

Educational material presented to the patient (or guardian) at the time of vaccine administration.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Identifier of the material presented to the patient.

Reference pointer to the educational material given to the patient if the information was on line.

Date the educational material was published.

Date the educational material was given to the patient.

Indicates a patient's eligibility for a funding program.

Indicates the source of the vaccine actually administered. This may be different than the patient eligibility (e.g. the patient may be eligible for a publically purchased vaccine but due to inventory issues, vaccine purchased with private funds was actually administered).

Categorical data indicating that an adverse event is associated in time to an immunization.

A reaction may be an indication of an allergy or intolerance and, if this is determined to be the case, it should be recorded as a new AllergyIntolerance resource instance as most systems will not query against past Immunization.reaction elements.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Date of reaction to the immunization.

Details of the reaction.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

An Extension

STU3: Immunization.reaction.detail additional types from child elements (display, identifier, reference)

Element Immunization.reaction.detail is mapped to FHIR R4B element Immunization.reaction.detail as SourceIsBroaderThanTarget. The mappings for Immunization.reaction.detail do not cover the following types based on type expansion: display, identifier, reference. The standard extension alternate-reference has been mapped as the representation of FHIR STU3 element Immunization.reaction.detail with unmapped reference targets: Observation.

A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

Plain text narrative that identifies the resource in addition to the resource reference.

This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

Self-reported indicator.