A formal computable definition of a graph of resources - that is, a coherent set of resources that form a graph by following references. The Graph Definition resource defines a set and makes rules about the set.

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

A natural language name identifying the graph definition. This name should be usable as an identifier for the module by machine processing applications such as code generation.

The name is not expected to be globally unique. The name should be a simple alphanumeric type name to ensure that it is machine-processing friendly.

Support human navigation and code generation.

The status of this graph definition. Enables tracking the life-cycle of the content.

Allows filtering of graph definitions that are appropriate for use versus not.

The lifecycle status of an artifact.

The type of FHIR resource at which instances of this graph start.

One of the resource types defined as part of this version of FHIR.

An Extension

STU3: GraphDefinition.start additional codes

Element GraphDefinition.start is mapped to FHIR R4B element GraphDefinition.start as RelatedTo. The mappings for GraphDefinition.start do not allow expression of the necessary codes, per the bindings on the source and target.

STU3: GraphDefinition.meta additional types (Meta) additional types from child elements (lastUpdated, profile, security, tag, versionId)

Element GraphDefinition.meta is mapped to FHIR R4B element GraphDefinition.meta as SourceIsBroaderThanTarget. The mappings for GraphDefinition.meta do not cover the following types: Meta. The mappings for GraphDefinition.meta do not cover the following types based on type expansion: lastUpdated, profile, security, tag, versionId.

STU3: GraphDefinition.text additional types (Narrative) additional types from child elements (div, status)

Element GraphDefinition.text is mapped to FHIR R4B element GraphDefinition.text as SourceIsBroaderThanTarget. The mappings for GraphDefinition.text do not cover the following types: Narrative. The mappings for GraphDefinition.text do not cover the following types based on type expansion: div, status. Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded in formation is added later.

STU3: GraphDefinition.contact additional types (ContactDetail) additional types from child elements (name, telecom)

Element GraphDefinition.contact is mapped to FHIR R4B element GraphDefinition.contact as SourceIsBroaderThanTarget. The mappings for GraphDefinition.contact do not cover the following types: ContactDetail. The mappings for GraphDefinition.contact do not cover the following types based on type expansion: name, telecom. May be a web site, an email address, a telephone number, etc.

STU3: GraphDefinition.useContext additional types (UsageContext) additional types from child elements (code, value[x])

Element GraphDefinition.useContext is mapped to FHIR R4B element GraphDefinition.useContext as SourceIsBroaderThanTarget. The mappings for GraphDefinition.useContext do not cover the following types: UsageContext. The mappings for GraphDefinition.useContext do not cover the following types based on type expansion: code, value[x]. When multiple useContexts are specified, there is no expectation whether all or any of the contexts apply.

STU3: GraphDefinition.start additional codes

Element GraphDefinition.start is mapped to FHIR R4B element GraphDefinition.start as RelatedTo. The mappings for GraphDefinition.start do not allow expression of the necessary codes, per the bindings on the source and target.

STU3: GraphDefinition.link.target.type additional codes

Element GraphDefinition.link.target.type is mapped to FHIR R4B element GraphDefinition.link.target.type as RelatedTo. The mappings for GraphDefinition.link.target.type do not allow expression of the necessary codes, per the bindings on the source and target.

A formal computable definition of a graph of resources - that is, a coherent set of resources that form a graph by following references. The Graph Definition resource defines a set and makes rules about the set.

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

An Extension

STU3: GraphDefinition.meta additional types (Meta) additional types from child elements (lastUpdated, profile, security, tag, versionId)

Element GraphDefinition.meta is mapped to FHIR R4B element GraphDefinition.meta as SourceIsBroaderThanTarget. The mappings for GraphDefinition.meta do not cover the following types: Meta. The mappings for GraphDefinition.meta do not cover the following types based on type expansion: lastUpdated, profile, security, tag, versionId.

The version specific identifier, as it appears in the version portion of the URL. This value changes when the resource is created, updated, or deleted.

The server assigns this value, and ignores what the client specifies, except in the case that the server is imposing version integrity on updates/deletes.

When the resource last changed - e.g. when the version changed.

This value is always populated except when the resource is first being created. The server / resource manager sets this value; what a client provides is irrelevant. This is equivalent to the HTTP Last-Modified and SHOULD have the same value on a read interaction.

A uri that identifies the source system of the resource. This provides a minimal amount of Provenance information that can be used to track or differentiate the source of information in the resource. The source may identify another FHIR server, document, message, database, etc.

In the provenance resource, this corresponds to Provenance.entity.what[x]. The exact use of the source (and the implied Provenance.entity.role) is left to implementer discretion. Only one nominated source is allowed; for additional provenance details, a full Provenance resource should be used.

This element can be used to indicate where the current master source of a resource that has a canonical URL if the resource is no longer hosted at the canonical URL.

A list of profiles (references to StructureDefinition resources) that this resource claims to conform to. The URL is a reference to StructureDefinition.url.

It is up to the server and/or other infrastructure of policy to determine whether/how these claims are verified and/or updated over time. The list of profile URLs is a set.

Security labels applied to this resource. These tags connect specific resources to the overall security policy and infrastructure.

The security labels can be updated without changing the stated version of the resource. The list of security labels is a set. Uniqueness is based the system/code, and version and display are ignored.

Tags applied to this resource. Tags are intended to be used to identify and relate resources to process and workflow, and applications are not required to consider the tags when interpreting the meaning of a resource.

The tags can be updated without changing the stated version of the resource. The list of tags is a set. Uniqueness is based the system/code, and version and display are ignored.

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

The base language in which the resource is written.

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

IETF language tag

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

An Extension

STU3: GraphDefinition.text additional types (Narrative) additional types from child elements (div, status)

Element GraphDefinition.text is mapped to FHIR R4B element GraphDefinition.text as SourceIsBroaderThanTarget. The mappings for GraphDefinition.text do not cover the following types: Narrative. The mappings for GraphDefinition.text do not cover the following types based on type expansion: div, status. Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded in formation is added later.

The status of the narrative - whether it's entirely generated (from just the defined data or the extensions too), or whether a human authored it and it may contain additional data.

The actual narrative content, a stripped down version of XHTML.

The contents of the html element are an XHTML fragment containing only the basic html formatting elements described in chapters 7-11 and 15 of the HTML 4.0 standard, <a> elements (either name or href), images and internally contained stylesheets. The XHTML content SHALL NOT contain a head, a body, external stylesheet references, scripts, forms, base/link/xlink, frames, iframes and objects.

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

An absolute URI that is used to identify this graph definition when it is referenced in a specification, model, design or an instance; also called its canonical identifier. This SHOULD be globally unique and SHOULD be a literal address at which at which an authoritative instance of this graph definition is (or will be) published. This URL can be the target of a canonical reference. It SHALL remain the same when the graph definition is stored on different servers.

Can be a urn:uuid: or a urn:oid: but real http: addresses are preferred. Multiple instances may share the same URL if they have a distinct version.

The determination of when to create a new version of a resource (same url, new version) vs. defining a new artifact is up to the author. Considerations for making this decision are found in Technical and Business Versions.

In some cases, the resource can no longer be found at the stated url, but the url itself cannot change. Implementations can use the meta.source element to indicate where the current master source of the resource can be found.

Allows the graph definition to be referenced by a single globally unique identifier.

The identifier that is used to identify this version of the graph definition when it is referenced in a specification, model, design or instance. This is an arbitrary value managed by the graph definition author and is not expected to be globally unique. For example, it might be a timestamp (e.g. yyyymmdd) if a managed version is not available. There is also no expectation that versions can be placed in a lexicographical sequence.

There may be different graph definition instances that have the same identifier but different versions. The version can be appended to the url in a reference to allow a reference to a particular business version of the graph definition with the format [url]|[version].

A natural language name identifying the graph definition. This name should be usable as an identifier for the module by machine processing applications such as code generation.

The name is not expected to be globally unique. The name should be a simple alphanumeric type name to ensure that it is machine-processing friendly.

Support human navigation and code generation.

The status of this graph definition. Enables tracking the life-cycle of the content.

Allows filtering of graph definitions that are appropriate for use versus not.

The lifecycle status of an artifact.

A Boolean value to indicate that this graph definition is authored for testing purposes (or education/evaluation/marketing) and is not intended to be used for genuine usage.

Allows filtering of graph definitions that are appropriate for use versus not.

Enables experimental content to be developed following the same lifecycle that would be used for a production-level graph definition.

The date (and optionally time) when the graph definition was published. The date must change when the business version changes and it must change if the status code changes. In addition, it should change when the substantive content of the graph definition changes.

Note that this is not the same as the resource last-modified-date, since the resource may be a secondary representation of the graph definition. Additional specific dates may be added as extensions or be found by consulting Provenances associated with past versions of the resource.

The name of the organization or individual that published the graph definition.

Usually an organization but may be an individual. The publisher (or steward) of the graph definition is the organization or individual primarily responsible for the maintenance and upkeep of the graph definition. This is not necessarily the same individual or organization that developed and initially authored the content. The publisher is the primary point of contact for questions or issues with the graph definition. This item SHOULD be populated unless the information is available from context.

Helps establish the "authority/credibility" of the graph definition. May also allow for contact.

Contact details to assist a user in finding and communicating with the publisher.

May be a web site, an email address, a telephone number, etc.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

An Extension

STU3: GraphDefinition.contact additional types (ContactDetail) additional types from child elements (name, telecom)

Element GraphDefinition.contact is mapped to FHIR R4B element GraphDefinition.contact as SourceIsBroaderThanTarget. The mappings for GraphDefinition.contact do not cover the following types: ContactDetail. The mappings for GraphDefinition.contact do not cover the following types based on type expansion: name, telecom. May be a web site, an email address, a telephone number, etc.

The name of an individual to contact.

If there is no named individual, the telecom information is for the organization as a whole.

The contact details for the individual (if a name was provided) or the organization.

A free text natural language description of the graph definition from a consumer's perspective.

This description can be used to capture details such as why the graph definition was built, comments about misuse, instructions for clinical use and interpretation, literature references, examples from the paper world, etc. It is not a rendering of the graph definition as conveyed in the 'text' field of the resource itself. This item SHOULD be populated unless the information is available from context (e.g. the language of the graph definition is presumed to be the predominant language in the place the graph definition was created).

The content was developed with a focus and intent of supporting the contexts that are listed. These contexts may be general categories (gender, age, ...) or may be references to specific programs (insurance plans, studies, ...) and may be used to assist with indexing and searching for appropriate graph definition instances.

When multiple useContexts are specified, there is no expectation that all or any of the contexts apply.

Assist in searching for appropriate content.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

An Extension

STU3: GraphDefinition.useContext additional types (UsageContext) additional types from child elements (code, value[x])

Element GraphDefinition.useContext is mapped to FHIR R4B element GraphDefinition.useContext as SourceIsBroaderThanTarget. The mappings for GraphDefinition.useContext do not cover the following types: UsageContext. The mappings for GraphDefinition.useContext do not cover the following types based on type expansion: code, value[x]. When multiple useContexts are specified, there is no expectation whether all or any of the contexts apply.

A code that identifies the type of context being specified by this usage context.

A value that defines the context specified in this context of use. The interpretation of the value is defined by the code.

A legal or geographic region in which the graph definition is intended to be used.

It may be possible for the graph definition to be used in jurisdictions other than those for which it was originally designed or intended.

Countries and regions within which this artifact is targeted for use.

Explanation of why this graph definition is needed and why it has been designed as it has.

This element does not describe the usage of the graph definition. Instead, it provides traceability of ''why'' the resource is either needed or ''why'' it is defined as it is. This may be used to point to source materials or specifications that drove the structure of this graph definition.

The type of FHIR resource at which instances of this graph start.

One of the resource types defined as part of this version of FHIR.

unique id for the element within a resource (for internal references)

An Extension

STU3: GraphDefinition.start additional codes

Element GraphDefinition.start is mapped to FHIR R4B element GraphDefinition.start as RelatedTo. The mappings for GraphDefinition.start do not allow expression of the necessary codes, per the bindings on the source and target.

Primitive value for code

The profile that describes the use of the base resource.

The code does not include the '$' prefix that is always included in the URL when the operation is invoked.

Links this graph makes rules about.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

A FHIR expression that identifies one of FHIR References to other resources.

The path expression cannot contain a resolve() function. If there is no path, the link is a reverse lookup, using target.params. If the path is "*" then this means all references in the resource.

Which slice (if profiled).

Minimum occurrences for this link.

Maximum occurrences for this link.

Information about why this link is of interest in this graph definition.

Potential target for the link.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Type of resource this link refers to.

One of the resource types defined as part of this version of FHIR.

unique id for the element within a resource (for internal references)

An Extension

STU3: GraphDefinition.link.target.type additional codes

Element GraphDefinition.link.target.type is mapped to FHIR R4B element GraphDefinition.link.target.type as RelatedTo. The mappings for GraphDefinition.link.target.type do not allow expression of the necessary codes, per the bindings on the source and target.

Primitive value for code

A set of parameters to look up.

At least one of the parameters must have the value {ref} which identifies the focus resource.

Profile for the target resource.

Compartment Consistency Rules.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Defines how the compartment rule is used - whether it it is used to test whether resources are subject to the rule, or whether it is a rule that must be followed.

All conditional rules are evaluated; if they are true, then the rules are evaluated.

Defines how a compartment rule is used.

Identifies the compartment.

Identifies a compartment.

identical | matching | different | no-rule | custom.

How a compartment must be linked.

Custom rule, as a FHIRPath expression.

Documentation for FHIRPath expression.

Additional links from target resource.