Extensions for Using Data Elements from FHIR STU3 in FHIR R4B
0.1.0 - STU International flag

Extensions for Using Data Elements from FHIR STU3 in FHIR R4B - Downloaded Version null See the Directory of published versions

Extension: ExtensionMedicationStatement_Dosage - Detailed Descriptions

Page standards status: Trial-use Maturity Level: 0

Definitions for the ext-R3-MedicationStatement.dosage extension.

Guidance on how to interpret the contents of this table can be foundhere

0. Extension
Definition

STU3: MedicationStatement.dosage additional types (Dosage) additional types from child elements (additionalInstruction, asNeeded[x], dose[x], maxDosePerAdministration, maxDosePerLifetime, maxDosePerPeriod, method, patientInstruction, rate[x], route, sequence, site, text, timing)


Optional Extension Element - found in all resources.

ShortSTU3: dosage additional typesOptional Extensions Element
Comments

Element MedicationStatement.dosage is mapped to FHIR R4B element MedicationStatement.dosage as SourceIsBroaderThanTarget. The mappings for MedicationStatement.dosage do not cover the following types: Dosage. The mappings for MedicationStatement.dosage do not cover the following types based on type expansion: additionalInstruction, asNeeded[x], dose[x], maxDosePerAdministration, maxDosePerLifetime, maxDosePerPeriod, method, patientInstruction, rate[x], route, sequence, site, text, timing. The dates included in the dosage on a Medication Statement reflect the dates for a given dose. For example, "from November 1, 2016 to November 3, 2016, take one tablet daily and from November 4, 2016 to November 7, 2016, take two tablets daily." It is expected that this specificity may only be populated where the patient brings in their labeled container or where the Medication Statement is derived from a MedicationRequest.

Control0..*
This element is affected by the following invariants: ele-1
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children unless an empty Parameters resource (hasValue() or (children().count() > id.count()) or $this is Parameters)
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource (hasValue() or (children().count() > id.count()) or $this is Parameters)
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
2. Extension.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Valuehttp://hl7.org/fhir/3.0/StructureDefinition/extension-MedicationStatement.dosage
4. Extension.value[x]
Definition

Indicates how the medication is/was or should be taken by the patient.


Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortDetails of how medication is/was taken or should be takenValue of extension
Comments

The dates included in the dosage on a Medication Statement reflect the dates for a given dose. For example, "from November 1, 2016 to November 3, 2016, take one tablet daily and from November 4, 2016 to November 7, 2016, take two tablets daily." It is expected that this specificity may only be populated where the patient brings in their labeled container or where the Medication Statement is derived from a MedicationRequest.

Control0..1
TypeDosage, date, Address, Attachment, integer, Count, DataRequirement, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be foundhere

0. Extension
Definition

STU3: MedicationStatement.dosage additional types (Dosage) additional types from child elements (additionalInstruction, asNeeded[x], dose[x], maxDosePerAdministration, maxDosePerLifetime, maxDosePerPeriod, method, patientInstruction, rate[x], route, sequence, site, text, timing)

ShortSTU3: dosage additional types
Comments

Element MedicationStatement.dosage is mapped to FHIR R4B element MedicationStatement.dosage as SourceIsBroaderThanTarget. The mappings for MedicationStatement.dosage do not cover the following types: Dosage. The mappings for MedicationStatement.dosage do not cover the following types based on type expansion: additionalInstruction, asNeeded[x], dose[x], maxDosePerAdministration, maxDosePerLifetime, maxDosePerPeriod, method, patientInstruction, rate[x], route, sequence, site, text, timing. The dates included in the dosage on a Medication Statement reflect the dates for a given dose. For example, "from November 1, 2016 to November 3, 2016, take one tablet daily and from November 4, 2016 to November 7, 2016, take two tablets daily." It is expected that this specificity may only be populated where the patient brings in their labeled container or where the Medication Statement is derived from a MedicationRequest.

Control0..*
Is Modifierfalse
2. Extension.url
Control1..1
Fixed Valuehttp://hl7.org/fhir/3.0/StructureDefinition/extension-MedicationStatement.dosage
4. Extension.value[x]
Definition

Indicates how the medication is/was or should be taken by the patient.

ShortDetails of how medication is/was taken or should be taken
Comments

The dates included in the dosage on a Medication Statement reflect the dates for a given dose. For example, "from November 1, 2016 to November 3, 2016, take one tablet daily and from November 4, 2016 to November 7, 2016, take two tablets daily." It is expected that this specificity may only be populated where the patient brings in their labeled container or where the Medication Statement is derived from a MedicationRequest.

Control0..1
TypeDosage, date, Address, Attachment, integer, Count, DataRequirement, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]

Guidance on how to interpret the contents of this table can be foundhere

0. Extension
Definition

STU3: MedicationStatement.dosage additional types (Dosage) additional types from child elements (additionalInstruction, asNeeded[x], dose[x], maxDosePerAdministration, maxDosePerLifetime, maxDosePerPeriod, method, patientInstruction, rate[x], route, sequence, site, text, timing)

ShortSTU3: dosage additional types
Comments

Element MedicationStatement.dosage is mapped to FHIR R4B element MedicationStatement.dosage as SourceIsBroaderThanTarget. The mappings for MedicationStatement.dosage do not cover the following types: Dosage. The mappings for MedicationStatement.dosage do not cover the following types based on type expansion: additionalInstruction, asNeeded[x], dose[x], maxDosePerAdministration, maxDosePerLifetime, maxDosePerPeriod, method, patientInstruction, rate[x], route, sequence, site, text, timing. The dates included in the dosage on a Medication Statement reflect the dates for a given dose. For example, "from November 1, 2016 to November 3, 2016, take one tablet daily and from November 4, 2016 to November 7, 2016, take two tablets daily." It is expected that this specificity may only be populated where the patient brings in their labeled container or where the Medication Statement is derived from a MedicationRequest.

Control0..*
This element is affected by the following invariants: ele-1
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children unless an empty Parameters resource (hasValue() or (children().count() > id.count()) or $this is Parameters)
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
2. Extension.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typeid
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
4. Extension.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
    • 6. Extension.url
    Definition

    Source of the definition for the extension code - a logical name or a URL.

    Shortidentifies the meaning of the extension
    Comments

    The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

    Control1..1
    Typeuri
    Is Modifierfalse
    XML FormatIn the XML format, this property is represented as an attribute.
    Summaryfalse
    Fixed Valuehttp://hl7.org/fhir/3.0/StructureDefinition/extension-MedicationStatement.dosage
    8. Extension.value[x]
    Definition

    Indicates how the medication is/was or should be taken by the patient.

    ShortDetails of how medication is/was taken or should be taken
    Comments

    The dates included in the dosage on a Medication Statement reflect the dates for a given dose. For example, "from November 1, 2016 to November 3, 2016, take one tablet daily and from November 4, 2016 to November 7, 2016, take two tablets daily." It is expected that this specificity may only be populated where the patient brings in their labeled container or where the Medication Statement is derived from a MedicationRequest.

    Control0..1
    TypeDosage
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))