ExtensionExpansionProfile_Designation - Definitions - Extensions for Using Data Elements from FHIR STU3 in FHIR R4B v0.1.0

Extensions for Using Data Elements from FHIR STU3 in FHIR R4B - Downloaded Version null See the Directory of published versions

Extension: ExtensionExpansionProfile_Designation - Detailed Descriptions

Page standards status: Trial-use

Maturity Level: 0

Definitions for the ext-R3-ExpansionProfile.designation extension.

Key Elements Table
Differential Elements Table
Snapshot Elements Table

Guidance on how to interpret the contents of this table can be foundhere

0. Extension
Definition	STU3: `ExpansionProfile.designation` (new:BackboneElement) Optional Extension Element - found in all resources.
Short	STU3: When the expansion profile imposes designation contraints (new)Optional Extensions Element
Comments	Element `ExpansionProfile.designation` has a context of Parameters based on following the parent source element upwards and mapping to `Parameters`. Element `ExpansionProfile.designation` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Control	0..1* This element is affected by the following invariants: ele-1
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource (`hasValue() or (children().count() > id.count()) or $this is Parameters`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource (hasValue() or (children().count() > id.count()) or $this is Parameters) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
2. Extension.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing	This element introduces a set of slices on `Extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
4. Extension.extension:include
Slice Name	include
Definition	STU3: `ExpansionProfile.designation.include` (new:BackboneElement)
Short	STU3: Designations to be included (new)Additional content defined by implementations
Comments	Element `ExpansionProfile.designation.include` is part of an existing definition because parent element `ExpansionProfile.designation` requires a cross-version extension. Element `ExpansionProfile.designation.include` has a context of Parameters based on following the parent source element upwards and mapping to `Parameters`. Element `ExpansionProfile.designation.include` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `ExpansionProfile.designation.include` is part of an existing definition because parent element `ExpansionProfile.designation` requires a cross-version extension. Element `ExpansionProfile.designation.include` has a context of Parameters based on following the parent source element upwards and mapping to `Parameters`. Element `ExpansionProfile.designation.include` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
6. Extension.extension:include.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
8. Extension.extension:include.extension:designation
Slice Name	designation
Definition	STU3: `ExpansionProfile.designation.include.designation` (new:BackboneElement)
Short	STU3: The designation to be included (new)Additional content defined by implementations
Comments	Element `ExpansionProfile.designation.include.designation` is part of an existing definition because parent element `ExpansionProfile.designation.include` requires a cross-version extension. Element `ExpansionProfile.designation.include.designation` has a context of Parameters based on following the parent source element upwards and mapping to `Parameters`. Element `ExpansionProfile.designation.include.designation` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). At least one of designation.language or designation.use must be provided for each include.designation element.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `ExpansionProfile.designation.include.designation` is part of an existing definition because parent element `ExpansionProfile.designation.include` requires a cross-version extension. Element `ExpansionProfile.designation.include.designation` has a context of Parameters based on following the parent source element upwards and mapping to `Parameters`. Element `ExpansionProfile.designation.include.designation` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
10. Extension.extension:include.extension:designation.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
12. Extension.extension:include.extension:designation.extension:language
Slice Name	language
Definition	STU3: `ExpansionProfile.designation.include.designation.language` (new:code)
Short	STU3: Human language of the designation to be included (new)Additional content defined by implementations
Comments	Element `ExpansionProfile.designation.include.designation.language` is part of an existing definition because parent element `ExpansionProfile.designation.include.designation` requires a cross-version extension. Element `ExpansionProfile.designation.include.designation.language` has a context of Parameters based on following the parent source element upwards and mapping to `Parameters`. Element `ExpansionProfile.designation.include.designation.language` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). In the absence of a language, all designations are retained which match the designation.use parameter for this include.designation.
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `ExpansionProfile.designation.include.designation.language` is part of an existing definition because parent element `ExpansionProfile.designation.include.designation` requires a cross-version extension. Element `ExpansionProfile.designation.include.designation.language` has a context of Parameters based on following the parent source element upwards and mapping to `Parameters`. Element `ExpansionProfile.designation.include.designation.language` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
14. Extension.extension:include.extension:designation.extension:language.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`language`
16. Extension.extension:include.extension:designation.extension:language.value[x]
Definition	The language this designation is defined for. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Human language of the designation to be includedValue of extension
Comments	In the absence of a language, all designations are retained which match the designation.use parameter for this include.designation.
Control	0..1
Type	code, date, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
18. Extension.extension:include.extension:designation.extension:use
Slice Name	use
Definition	STU3: `ExpansionProfile.designation.include.designation.use` (new:Coding)
Short	STU3: What kind of Designation to include (new)Additional content defined by implementations
Comments	Element `ExpansionProfile.designation.include.designation.use` is part of an existing definition because parent element `ExpansionProfile.designation.include.designation` requires a cross-version extension. Element `ExpansionProfile.designation.include.designation.use` has a context of Parameters based on following the parent source element upwards and mapping to `Parameters`. Element `ExpansionProfile.designation.include.designation.use` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). In the absence of a use, all designations are retained which match the designation.language parameter for this include.designation element.
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `ExpansionProfile.designation.include.designation.use` is part of an existing definition because parent element `ExpansionProfile.designation.include.designation` requires a cross-version extension. Element `ExpansionProfile.designation.include.designation.use` has a context of Parameters based on following the parent source element upwards and mapping to `Parameters`. Element `ExpansionProfile.designation.include.designation.use` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
20. Extension.extension:include.extension:designation.extension:use.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`use`
22. Extension.extension:include.extension:designation.extension:use.value[x]
Definition	Which kinds of designation to include in the expansion. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	What kind of Designation to includeValue of extension
Comments	In the absence of a use, all designations are retained which match the designation.language parameter for this include.designation element.
Control	0..1
Type	Coding, date, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
24. Extension.extension:include.extension:designation.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`designation`
26. Extension.extension:include.extension:designation.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..01
Type	Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
28. Extension.extension:include.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`include`
30. Extension.extension:include.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..01
Type	Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
32. Extension.extension:exclude
Slice Name	exclude
Definition	STU3: `ExpansionProfile.designation.exclude` (new:BackboneElement)
Short	STU3: Designations to be excluded (new)Additional content defined by implementations
Comments	Element `ExpansionProfile.designation.exclude` is part of an existing definition because parent element `ExpansionProfile.designation` requires a cross-version extension. Element `ExpansionProfile.designation.exclude` has a context of Parameters based on following the parent source element upwards and mapping to `Parameters`. Element `ExpansionProfile.designation.exclude` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `ExpansionProfile.designation.exclude` is part of an existing definition because parent element `ExpansionProfile.designation` requires a cross-version extension. Element `ExpansionProfile.designation.exclude` has a context of Parameters based on following the parent source element upwards and mapping to `Parameters`. Element `ExpansionProfile.designation.exclude` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
34. Extension.extension:exclude.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
36. Extension.extension:exclude.extension:designation
Slice Name	designation
Definition	STU3: `ExpansionProfile.designation.exclude.designation` (new:BackboneElement)
Short	STU3: The designation to be excluded (new)Additional content defined by implementations
Comments	Element `ExpansionProfile.designation.exclude.designation` is part of an existing definition because parent element `ExpansionProfile.designation.exclude` requires a cross-version extension. Element `ExpansionProfile.designation.exclude.designation` has a context of Parameters based on following the parent source element upwards and mapping to `Parameters`. Element `ExpansionProfile.designation.exclude.designation` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). At least one of designation.language or designation.use must be provided for each exclude.designation element.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `ExpansionProfile.designation.exclude.designation` is part of an existing definition because parent element `ExpansionProfile.designation.exclude` requires a cross-version extension. Element `ExpansionProfile.designation.exclude.designation` has a context of Parameters based on following the parent source element upwards and mapping to `Parameters`. Element `ExpansionProfile.designation.exclude.designation` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
38. Extension.extension:exclude.extension:designation.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
40. Extension.extension:exclude.extension:designation.extension:language
Slice Name	language
Definition	STU3: `ExpansionProfile.designation.exclude.designation.language` (new:code)
Short	STU3: Human language of the designation to be excluded (new)Additional content defined by implementations
Comments	Element `ExpansionProfile.designation.exclude.designation.language` is part of an existing definition because parent element `ExpansionProfile.designation.exclude.designation` requires a cross-version extension. Element `ExpansionProfile.designation.exclude.designation.language` has a context of Parameters based on following the parent source element upwards and mapping to `Parameters`. Element `ExpansionProfile.designation.exclude.designation.language` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). In the absence of a language, all designations are excluded which match the designation.use parameter for this exclude.designation element.
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `ExpansionProfile.designation.exclude.designation.language` is part of an existing definition because parent element `ExpansionProfile.designation.exclude.designation` requires a cross-version extension. Element `ExpansionProfile.designation.exclude.designation.language` has a context of Parameters based on following the parent source element upwards and mapping to `Parameters`. Element `ExpansionProfile.designation.exclude.designation.language` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
42. Extension.extension:exclude.extension:designation.extension:language.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`language`
44. Extension.extension:exclude.extension:designation.extension:language.value[x]
Definition	The language this designation is defined for. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Human language of the designation to be excludedValue of extension
Comments	In the absence of a language, all designations are excluded which match the designation.use parameter for this exclude.designation element.
Control	0..1
Type	code, date, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
46. Extension.extension:exclude.extension:designation.extension:use
Slice Name	use
Definition	STU3: `ExpansionProfile.designation.exclude.designation.use` (new:Coding)
Short	STU3: What kind of Designation to exclude (new)Additional content defined by implementations
Comments	Element `ExpansionProfile.designation.exclude.designation.use` is part of an existing definition because parent element `ExpansionProfile.designation.exclude.designation` requires a cross-version extension. Element `ExpansionProfile.designation.exclude.designation.use` has a context of Parameters based on following the parent source element upwards and mapping to `Parameters`. Element `ExpansionProfile.designation.exclude.designation.use` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). In the absence of a use, all designations are retained which match the designation.language parameter for this exclude.designation element.
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `ExpansionProfile.designation.exclude.designation.use` is part of an existing definition because parent element `ExpansionProfile.designation.exclude.designation` requires a cross-version extension. Element `ExpansionProfile.designation.exclude.designation.use` has a context of Parameters based on following the parent source element upwards and mapping to `Parameters`. Element `ExpansionProfile.designation.exclude.designation.use` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
48. Extension.extension:exclude.extension:designation.extension:use.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`use`
50. Extension.extension:exclude.extension:designation.extension:use.value[x]
Definition	Which kinds of designation to exclude from the expansion. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	What kind of Designation to excludeValue of extension
Comments	In the absence of a use, all designations are retained which match the designation.language parameter for this exclude.designation element.
Control	0..1
Type	Coding, date, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
52. Extension.extension:exclude.extension:designation.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`designation`
54. Extension.extension:exclude.extension:designation.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..01
Type	Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
56. Extension.extension:exclude.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`exclude`
58. Extension.extension:exclude.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..01
Type	Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
60. Extension.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`http://hl7.org/fhir/3.0/StructureDefinition/extension-ExpansionProfile.designation`
62. Extension.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..01
Type	Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be foundhere

0. Extension
Definition	STU3: `ExpansionProfile.designation` (new:BackboneElement)
Short	STU3: When the expansion profile imposes designation contraints (new)
Comments	Element `ExpansionProfile.designation` has a context of Parameters based on following the parent source element upwards and mapping to `Parameters`. Element `ExpansionProfile.designation` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Control	0..1
Is Modifier	false
2. Extension.extension
Control	0..*
Slicing	This element introduces a set of slices on `Extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
4. Extension.extension:include
Slice Name	include
Definition	STU3: `ExpansionProfile.designation.include` (new:BackboneElement)
Short	STU3: Designations to be included (new)
Comments	Element `ExpansionProfile.designation.include` is part of an existing definition because parent element `ExpansionProfile.designation` requires a cross-version extension. Element `ExpansionProfile.designation.include` has a context of Parameters based on following the parent source element upwards and mapping to `Parameters`. Element `ExpansionProfile.designation.include` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Control	0..1
Requirements	Element `ExpansionProfile.designation.include` is part of an existing definition because parent element `ExpansionProfile.designation` requires a cross-version extension. Element `ExpansionProfile.designation.include` has a context of Parameters based on following the parent source element upwards and mapping to `Parameters`. Element `ExpansionProfile.designation.include` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
6. Extension.extension:include.extension
Control	0..*
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
8. Extension.extension:include.extension:designation
Slice Name	designation
Definition	STU3: `ExpansionProfile.designation.include.designation` (new:BackboneElement)
Short	STU3: The designation to be included (new)
Comments	Element `ExpansionProfile.designation.include.designation` is part of an existing definition because parent element `ExpansionProfile.designation.include` requires a cross-version extension. Element `ExpansionProfile.designation.include.designation` has a context of Parameters based on following the parent source element upwards and mapping to `Parameters`. Element `ExpansionProfile.designation.include.designation` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). At least one of designation.language or designation.use must be provided for each include.designation element.
Control	0..*
Requirements	Element `ExpansionProfile.designation.include.designation` is part of an existing definition because parent element `ExpansionProfile.designation.include` requires a cross-version extension. Element `ExpansionProfile.designation.include.designation` has a context of Parameters based on following the parent source element upwards and mapping to `Parameters`. Element `ExpansionProfile.designation.include.designation` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
10. Extension.extension:include.extension:designation.extension
Control	0..*
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
12. Extension.extension:include.extension:designation.extension:language
Slice Name	language
Definition	STU3: `ExpansionProfile.designation.include.designation.language` (new:code)
Short	STU3: Human language of the designation to be included (new)
Comments	Element `ExpansionProfile.designation.include.designation.language` is part of an existing definition because parent element `ExpansionProfile.designation.include.designation` requires a cross-version extension. Element `ExpansionProfile.designation.include.designation.language` has a context of Parameters based on following the parent source element upwards and mapping to `Parameters`. Element `ExpansionProfile.designation.include.designation.language` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). In the absence of a language, all designations are retained which match the designation.use parameter for this include.designation.
Control	0..1
Requirements	Element `ExpansionProfile.designation.include.designation.language` is part of an existing definition because parent element `ExpansionProfile.designation.include.designation` requires a cross-version extension. Element `ExpansionProfile.designation.include.designation.language` has a context of Parameters based on following the parent source element upwards and mapping to `Parameters`. Element `ExpansionProfile.designation.include.designation.language` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
14. Extension.extension:include.extension:designation.extension:language.url
Control	1..1
Fixed Value	`language`
16. Extension.extension:include.extension:designation.extension:language.value[x]
Definition	The language this designation is defined for.
Short	Human language of the designation to be included
Comments	In the absence of a language, all designations are retained which match the designation.use parameter for this include.designation.
Control	0..1
Type	code
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
18. Extension.extension:include.extension:designation.extension:use
Slice Name	use
Definition	STU3: `ExpansionProfile.designation.include.designation.use` (new:Coding)
Short	STU3: What kind of Designation to include (new)
Comments	Element `ExpansionProfile.designation.include.designation.use` is part of an existing definition because parent element `ExpansionProfile.designation.include.designation` requires a cross-version extension. Element `ExpansionProfile.designation.include.designation.use` has a context of Parameters based on following the parent source element upwards and mapping to `Parameters`. Element `ExpansionProfile.designation.include.designation.use` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). In the absence of a use, all designations are retained which match the designation.language parameter for this include.designation element.
Control	0..1
Requirements	Element `ExpansionProfile.designation.include.designation.use` is part of an existing definition because parent element `ExpansionProfile.designation.include.designation` requires a cross-version extension. Element `ExpansionProfile.designation.include.designation.use` has a context of Parameters based on following the parent source element upwards and mapping to `Parameters`. Element `ExpansionProfile.designation.include.designation.use` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
20. Extension.extension:include.extension:designation.extension:use.url
Control	1..1
Fixed Value	`use`
22. Extension.extension:include.extension:designation.extension:use.value[x]
Definition	Which kinds of designation to include in the expansion.
Short	What kind of Designation to include
Comments	In the absence of a use, all designations are retained which match the designation.language parameter for this include.designation element.
Control	0..1
Type	Coding
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
24. Extension.extension:include.extension:designation.url
Control	1..1
Fixed Value	`designation`
26. Extension.extension:include.extension:designation.value[x]
Control	0..0
28. Extension.extension:include.url
Control	1..1
Fixed Value	`include`
30. Extension.extension:include.value[x]
Control	0..0
32. Extension.extension:exclude
Slice Name	exclude
Definition	STU3: `ExpansionProfile.designation.exclude` (new:BackboneElement)
Short	STU3: Designations to be excluded (new)
Comments	Element `ExpansionProfile.designation.exclude` is part of an existing definition because parent element `ExpansionProfile.designation` requires a cross-version extension. Element `ExpansionProfile.designation.exclude` has a context of Parameters based on following the parent source element upwards and mapping to `Parameters`. Element `ExpansionProfile.designation.exclude` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Control	0..1
Requirements	Element `ExpansionProfile.designation.exclude` is part of an existing definition because parent element `ExpansionProfile.designation` requires a cross-version extension. Element `ExpansionProfile.designation.exclude` has a context of Parameters based on following the parent source element upwards and mapping to `Parameters`. Element `ExpansionProfile.designation.exclude` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
34. Extension.extension:exclude.extension
Control	0..*
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
36. Extension.extension:exclude.extension:designation
Slice Name	designation
Definition	STU3: `ExpansionProfile.designation.exclude.designation` (new:BackboneElement)
Short	STU3: The designation to be excluded (new)
Comments	Element `ExpansionProfile.designation.exclude.designation` is part of an existing definition because parent element `ExpansionProfile.designation.exclude` requires a cross-version extension. Element `ExpansionProfile.designation.exclude.designation` has a context of Parameters based on following the parent source element upwards and mapping to `Parameters`. Element `ExpansionProfile.designation.exclude.designation` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). At least one of designation.language or designation.use must be provided for each exclude.designation element.
Control	0..*
Requirements	Element `ExpansionProfile.designation.exclude.designation` is part of an existing definition because parent element `ExpansionProfile.designation.exclude` requires a cross-version extension. Element `ExpansionProfile.designation.exclude.designation` has a context of Parameters based on following the parent source element upwards and mapping to `Parameters`. Element `ExpansionProfile.designation.exclude.designation` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
38. Extension.extension:exclude.extension:designation.extension
Control	0..*
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
40. Extension.extension:exclude.extension:designation.extension:language
Slice Name	language
Definition	STU3: `ExpansionProfile.designation.exclude.designation.language` (new:code)
Short	STU3: Human language of the designation to be excluded (new)
Comments	Element `ExpansionProfile.designation.exclude.designation.language` is part of an existing definition because parent element `ExpansionProfile.designation.exclude.designation` requires a cross-version extension. Element `ExpansionProfile.designation.exclude.designation.language` has a context of Parameters based on following the parent source element upwards and mapping to `Parameters`. Element `ExpansionProfile.designation.exclude.designation.language` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). In the absence of a language, all designations are excluded which match the designation.use parameter for this exclude.designation element.
Control	0..1
Requirements	Element `ExpansionProfile.designation.exclude.designation.language` is part of an existing definition because parent element `ExpansionProfile.designation.exclude.designation` requires a cross-version extension. Element `ExpansionProfile.designation.exclude.designation.language` has a context of Parameters based on following the parent source element upwards and mapping to `Parameters`. Element `ExpansionProfile.designation.exclude.designation.language` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
42. Extension.extension:exclude.extension:designation.extension:language.url
Control	1..1
Fixed Value	`language`
44. Extension.extension:exclude.extension:designation.extension:language.value[x]
Definition	The language this designation is defined for.
Short	Human language of the designation to be excluded
Comments	In the absence of a language, all designations are excluded which match the designation.use parameter for this exclude.designation element.
Control	0..1
Type	code
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
46. Extension.extension:exclude.extension:designation.extension:use
Slice Name	use
Definition	STU3: `ExpansionProfile.designation.exclude.designation.use` (new:Coding)
Short	STU3: What kind of Designation to exclude (new)
Comments	Element `ExpansionProfile.designation.exclude.designation.use` is part of an existing definition because parent element `ExpansionProfile.designation.exclude.designation` requires a cross-version extension. Element `ExpansionProfile.designation.exclude.designation.use` has a context of Parameters based on following the parent source element upwards and mapping to `Parameters`. Element `ExpansionProfile.designation.exclude.designation.use` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). In the absence of a use, all designations are retained which match the designation.language parameter for this exclude.designation element.
Control	0..1
Requirements	Element `ExpansionProfile.designation.exclude.designation.use` is part of an existing definition because parent element `ExpansionProfile.designation.exclude.designation` requires a cross-version extension. Element `ExpansionProfile.designation.exclude.designation.use` has a context of Parameters based on following the parent source element upwards and mapping to `Parameters`. Element `ExpansionProfile.designation.exclude.designation.use` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
48. Extension.extension:exclude.extension:designation.extension:use.url
Control	1..1
Fixed Value	`use`
50. Extension.extension:exclude.extension:designation.extension:use.value[x]
Definition	Which kinds of designation to exclude from the expansion.
Short	What kind of Designation to exclude
Comments	In the absence of a use, all designations are retained which match the designation.language parameter for this exclude.designation element.
Control	0..1
Type	Coding
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
52. Extension.extension:exclude.extension:designation.url
Control	1..1
Fixed Value	`designation`
54. Extension.extension:exclude.extension:designation.value[x]
Control	0..0
56. Extension.extension:exclude.url
Control	1..1
Fixed Value	`exclude`
58. Extension.extension:exclude.value[x]
Control	0..0
60. Extension.url
Control	1..1
Fixed Value	`http://hl7.org/fhir/3.0/StructureDefinition/extension-ExpansionProfile.designation`
62. Extension.value[x]
Control	0..0

Guidance on how to interpret the contents of this table can be foundhere

0. Extension
Definition	STU3: `ExpansionProfile.designation` (new:BackboneElement)
Short	STU3: When the expansion profile imposes designation contraints (new)
Comments	Element `ExpansionProfile.designation` has a context of Parameters based on following the parent source element upwards and mapping to `Parameters`. Element `ExpansionProfile.designation` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Control	0..1 This element is affected by the following invariants: ele-1
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource (`hasValue() or (children().count() > id.count()) or $this is Parameters`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
2. Extension.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
4. Extension.extension
Definition	An Extension
Short	Extension
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
6. Extension.extension:include
Slice Name	include
Definition	STU3: `ExpansionProfile.designation.include` (new:BackboneElement)
Short	STU3: Designations to be included (new)
Comments	Element `ExpansionProfile.designation.include` is part of an existing definition because parent element `ExpansionProfile.designation` requires a cross-version extension. Element `ExpansionProfile.designation.include` has a context of Parameters based on following the parent source element upwards and mapping to `Parameters`. Element `ExpansionProfile.designation.include` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `ExpansionProfile.designation.include` is part of an existing definition because parent element `ExpansionProfile.designation` requires a cross-version extension. Element `ExpansionProfile.designation.include` has a context of Parameters based on following the parent source element upwards and mapping to `Parameters`. Element `ExpansionProfile.designation.include` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
8. Extension.extension:include.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
10. Extension.extension:include.extension
Definition	An Extension
Short	Extension
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
12. Extension.extension:include.extension:designation
Slice Name	designation
Definition	STU3: `ExpansionProfile.designation.include.designation` (new:BackboneElement)
Short	STU3: The designation to be included (new)
Comments	Element `ExpansionProfile.designation.include.designation` is part of an existing definition because parent element `ExpansionProfile.designation.include` requires a cross-version extension. Element `ExpansionProfile.designation.include.designation` has a context of Parameters based on following the parent source element upwards and mapping to `Parameters`. Element `ExpansionProfile.designation.include.designation` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). At least one of designation.language or designation.use must be provided for each include.designation element.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `ExpansionProfile.designation.include.designation` is part of an existing definition because parent element `ExpansionProfile.designation.include` requires a cross-version extension. Element `ExpansionProfile.designation.include.designation` has a context of Parameters based on following the parent source element upwards and mapping to `Parameters`. Element `ExpansionProfile.designation.include.designation` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
14. Extension.extension:include.extension:designation.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
16. Extension.extension:include.extension:designation.extension
Definition	An Extension
Short	Extension
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
18. Extension.extension:include.extension:designation.extension:language
Slice Name	language
Definition	STU3: `ExpansionProfile.designation.include.designation.language` (new:code)
Short	STU3: Human language of the designation to be included (new)
Comments	Element `ExpansionProfile.designation.include.designation.language` is part of an existing definition because parent element `ExpansionProfile.designation.include.designation` requires a cross-version extension. Element `ExpansionProfile.designation.include.designation.language` has a context of Parameters based on following the parent source element upwards and mapping to `Parameters`. Element `ExpansionProfile.designation.include.designation.language` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). In the absence of a language, all designations are retained which match the designation.use parameter for this include.designation.
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `ExpansionProfile.designation.include.designation.language` is part of an existing definition because parent element `ExpansionProfile.designation.include.designation` requires a cross-version extension. Element `ExpansionProfile.designation.include.designation.language` has a context of Parameters based on following the parent source element upwards and mapping to `Parameters`. Element `ExpansionProfile.designation.include.designation.language` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
20. Extension.extension:include.extension:designation.extension:language.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
22. Extension.extension:include.extension:designation.extension:language.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
24. Extension.extension:include.extension:designation.extension:language.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`language`
26. Extension.extension:include.extension:designation.extension:language.value[x]
Definition	The language this designation is defined for.
Short	Human language of the designation to be included
Comments	In the absence of a language, all designations are retained which match the designation.use parameter for this include.designation.
Control	0..1
Type	code
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
28. Extension.extension:include.extension:designation.extension:use
Slice Name	use
Definition	STU3: `ExpansionProfile.designation.include.designation.use` (new:Coding)
Short	STU3: What kind of Designation to include (new)
Comments	Element `ExpansionProfile.designation.include.designation.use` is part of an existing definition because parent element `ExpansionProfile.designation.include.designation` requires a cross-version extension. Element `ExpansionProfile.designation.include.designation.use` has a context of Parameters based on following the parent source element upwards and mapping to `Parameters`. Element `ExpansionProfile.designation.include.designation.use` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). In the absence of a use, all designations are retained which match the designation.language parameter for this include.designation element.
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `ExpansionProfile.designation.include.designation.use` is part of an existing definition because parent element `ExpansionProfile.designation.include.designation` requires a cross-version extension. Element `ExpansionProfile.designation.include.designation.use` has a context of Parameters based on following the parent source element upwards and mapping to `Parameters`. Element `ExpansionProfile.designation.include.designation.use` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
30. Extension.extension:include.extension:designation.extension:use.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
32. Extension.extension:include.extension:designation.extension:use.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
34. Extension.extension:include.extension:designation.extension:use.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`use`
36. Extension.extension:include.extension:designation.extension:use.value[x]
Definition	Which kinds of designation to include in the expansion.
Short	What kind of Designation to include
Comments	In the absence of a use, all designations are retained which match the designation.language parameter for this include.designation element.
Control	0..1
Type	Coding
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
38. Extension.extension:include.extension:designation.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`designation`
40. Extension.extension:include.extension:designation.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..0
Type	Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
42. Extension.extension:include.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`include`
44. Extension.extension:include.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..0
Type	Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
46. Extension.extension:exclude
Slice Name	exclude
Definition	STU3: `ExpansionProfile.designation.exclude` (new:BackboneElement)
Short	STU3: Designations to be excluded (new)
Comments	Element `ExpansionProfile.designation.exclude` is part of an existing definition because parent element `ExpansionProfile.designation` requires a cross-version extension. Element `ExpansionProfile.designation.exclude` has a context of Parameters based on following the parent source element upwards and mapping to `Parameters`. Element `ExpansionProfile.designation.exclude` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `ExpansionProfile.designation.exclude` is part of an existing definition because parent element `ExpansionProfile.designation` requires a cross-version extension. Element `ExpansionProfile.designation.exclude` has a context of Parameters based on following the parent source element upwards and mapping to `Parameters`. Element `ExpansionProfile.designation.exclude` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
48. Extension.extension:exclude.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
50. Extension.extension:exclude.extension
Definition	An Extension
Short	Extension
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
52. Extension.extension:exclude.extension:designation
Slice Name	designation
Definition	STU3: `ExpansionProfile.designation.exclude.designation` (new:BackboneElement)
Short	STU3: The designation to be excluded (new)
Comments	Element `ExpansionProfile.designation.exclude.designation` is part of an existing definition because parent element `ExpansionProfile.designation.exclude` requires a cross-version extension. Element `ExpansionProfile.designation.exclude.designation` has a context of Parameters based on following the parent source element upwards and mapping to `Parameters`. Element `ExpansionProfile.designation.exclude.designation` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). At least one of designation.language or designation.use must be provided for each exclude.designation element.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `ExpansionProfile.designation.exclude.designation` is part of an existing definition because parent element `ExpansionProfile.designation.exclude` requires a cross-version extension. Element `ExpansionProfile.designation.exclude.designation` has a context of Parameters based on following the parent source element upwards and mapping to `Parameters`. Element `ExpansionProfile.designation.exclude.designation` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
54. Extension.extension:exclude.extension:designation.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
56. Extension.extension:exclude.extension:designation.extension
Definition	An Extension
Short	Extension
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
58. Extension.extension:exclude.extension:designation.extension:language
Slice Name	language
Definition	STU3: `ExpansionProfile.designation.exclude.designation.language` (new:code)
Short	STU3: Human language of the designation to be excluded (new)
Comments	Element `ExpansionProfile.designation.exclude.designation.language` is part of an existing definition because parent element `ExpansionProfile.designation.exclude.designation` requires a cross-version extension. Element `ExpansionProfile.designation.exclude.designation.language` has a context of Parameters based on following the parent source element upwards and mapping to `Parameters`. Element `ExpansionProfile.designation.exclude.designation.language` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). In the absence of a language, all designations are excluded which match the designation.use parameter for this exclude.designation element.
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `ExpansionProfile.designation.exclude.designation.language` is part of an existing definition because parent element `ExpansionProfile.designation.exclude.designation` requires a cross-version extension. Element `ExpansionProfile.designation.exclude.designation.language` has a context of Parameters based on following the parent source element upwards and mapping to `Parameters`. Element `ExpansionProfile.designation.exclude.designation.language` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
60. Extension.extension:exclude.extension:designation.extension:language.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
62. Extension.extension:exclude.extension:designation.extension:language.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
64. Extension.extension:exclude.extension:designation.extension:language.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`language`
66. Extension.extension:exclude.extension:designation.extension:language.value[x]
Definition	The language this designation is defined for.
Short	Human language of the designation to be excluded
Comments	In the absence of a language, all designations are excluded which match the designation.use parameter for this exclude.designation element.
Control	0..1
Type	code
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
68. Extension.extension:exclude.extension:designation.extension:use
Slice Name	use
Definition	STU3: `ExpansionProfile.designation.exclude.designation.use` (new:Coding)
Short	STU3: What kind of Designation to exclude (new)
Comments	Element `ExpansionProfile.designation.exclude.designation.use` is part of an existing definition because parent element `ExpansionProfile.designation.exclude.designation` requires a cross-version extension. Element `ExpansionProfile.designation.exclude.designation.use` has a context of Parameters based on following the parent source element upwards and mapping to `Parameters`. Element `ExpansionProfile.designation.exclude.designation.use` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). In the absence of a use, all designations are retained which match the designation.language parameter for this exclude.designation element.
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `ExpansionProfile.designation.exclude.designation.use` is part of an existing definition because parent element `ExpansionProfile.designation.exclude.designation` requires a cross-version extension. Element `ExpansionProfile.designation.exclude.designation.use` has a context of Parameters based on following the parent source element upwards and mapping to `Parameters`. Element `ExpansionProfile.designation.exclude.designation.use` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
70. Extension.extension:exclude.extension:designation.extension:use.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
72. Extension.extension:exclude.extension:designation.extension:use.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
74. Extension.extension:exclude.extension:designation.extension:use.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`use`
76. Extension.extension:exclude.extension:designation.extension:use.value[x]
Definition	Which kinds of designation to exclude from the expansion.
Short	What kind of Designation to exclude
Comments	In the absence of a use, all designations are retained which match the designation.language parameter for this exclude.designation element.
Control	0..1
Type	Coding
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
78. Extension.extension:exclude.extension:designation.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`designation`
80. Extension.extension:exclude.extension:designation.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..0
Type	Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
82. Extension.extension:exclude.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`exclude`
84. Extension.extension:exclude.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..0
Type	Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
86. Extension.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`http://hl7.org/fhir/3.0/StructureDefinition/extension-ExpansionProfile.designation`
88. Extension.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..0
Type	Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)