<status value="active"/> <experimental value="false"/> <date value="2026-03-17T21:02:03.8104715+00:00"/> <publisher value="FHIR Infrastructure"/> <contact> <name value="FHIR Infrastructure"/> <telecom> <system value="url"/> <value value="http://www.hl7.org/Special/committees/fiwg"/> </telecom> </contact> <description value="STU3: `TestScript.setup.action.assert.ruleset` (new:BackboneElement)"/> <jurisdiction> <coding> <system value="http://unstats.un.org/unsd/methods/m49/m49.htm"/> <code value="001"/> <display value="World"/> </coding> </jurisdiction> <purpose value="This extension is part of the cross-version definitions generated to enable use of the element `TestScript.setup.action.assert.ruleset` as defined in FHIR STU3 in FHIR R4. The source element is defined as: `TestScript.setup.action.assert.ruleset` 0..1 `BackboneElement` Following are the generation technical comments: Element `TestScript.setup.action.assert.ruleset` has a context of TestScript.setup.action.assert based on following the parent source element upwards and mapping to `TestScript`. Element `TestScript.setup.action.assert.ruleset` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element)."/> <fhirVersion value="4.0.1"/> <mapping> <identity value="rim"/> <uri value="http://hl7.org/v3"/> <name value="RIM Mapping"/> </mapping> <kind value="complex-type"/> <abstract value="false"/> <context> <type value="element"/> <expression value="TestScript.setup.action.assert"/> </context> <type value="Extension"/> <baseDefinition value="http://hl7.org/fhir/StructureDefinition/Extension|4.0.1"/> <derivation value="constraint"/> <snapshot> <extension url="http://hl7.org/fhir/tools/StructureDefinition/snapshot-base-version"> <valueString value="4.0.1"/> </extension> <element id="Extension"> <path value="Extension"/> <short value="STU3: The reference to a TestScript.ruleset (new)"/> <definition value="STU3: `TestScript.setup.action.assert.ruleset` (new:BackboneElement)"/> <comment value="Element `TestScript.setup.action.assert.ruleset` has a context of TestScript.setup.action.assert based on following the parent source element upwards and mapping to `TestScript`. Element `TestScript.setup.action.assert.ruleset` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). Each rule within a ruleset should get evaluated by test engines as a separate assertion. The impact of negative rule evaluation on test script execution is the same as an assertion failure which is descibed elsewhere in the TestScript resource. If the first rule within the ruleset results in a failed assertion, then test engines do not have to evaluate the rest of the rules within the ruleset."/> <min value="0"/> <max value="1"/> <base> <path value="Extension"/> <min value="0"/> <max value="*"/> </base> <condition value="ele-1"/> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element|4.0.1"/> </constraint> <constraint> <key value="ext-1"/> <severity value="error"/> <human value="Must have either extensions or value[x], not both"/> <expression value="extension.exists() != value.exists()"/> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])"/> <source value="http://hl7.org/fhir/StructureDefinition/Extension|4.0.1"/> </constraint> <isModifier value="false"/> </element> <element id="Extension.id"> <path value="Extension.id"/> <representation value="xmlAttr"/> <short value="Unique id for inter-element referencing"/> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string"/> </extension> <code value="http://hl7.org/fhirpath/System.String"/> </type> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension"> <path value="Extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <ordered value="false"/> <rules value="open"/> </slicing> <short value="Extension"/> <definition value="An Extension"/> <min value="1"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element|4.0.1"/> </constraint> <constraint> <key value="ext-1"/> <severity value="error"/> <human value="Must have either extensions or value[x], not both"/> <expression value="extension.exists() != value.exists()"/> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), "value")])"/> <source value="http://hl7.org/fhir/StructureDefinition/Extension|4.0.1"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> </element> <element id="Extension.extension:rulesetId"> <path value="Extension.extension"/> <sliceName value="rulesetId"/> <short value="STU3: Id of the TestScript.ruleset (new)"/> <definition value="STU3: `TestScript.setup.action.assert.ruleset.rulesetId` (new:id)"/> <comment value="Element `TestScript.setup.action.assert.ruleset.rulesetId` is part of an existing definition because parent element `TestScript.setup.action.assert.ruleset` requires a cross-version extension. Element `TestScript.setup.action.assert.ruleset.rulesetId` has a context of TestScript.setup.action.assert based on following the parent source element upwards and mapping to `TestScript`. Element `TestScript.setup.action.assert.ruleset.rulesetId` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `TestScript.setup.action.assert.ruleset.rulesetId` is part of an existing definition because parent element `TestScript.setup.action.assert.ruleset` requires a cross-version extension. Element `TestScript.setup.action.assert.ruleset.rulesetId` has a context of TestScript.setup.action.assert based on following the parent source element upwards and mapping to `TestScript`. Element `TestScript.setup.action.assert.ruleset.rulesetId` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element)."/> <min value="1"/> <max value="1"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element|4.0.1"/> </constraint> <constraint> <key value="ext-1"/> <severity value="error"/> <human value="Must have either extensions or value[x], not both"/> <expression value="extension.exists() != value.exists()"/> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), "value")])"/> <source value="http://hl7.org/fhir/StructureDefinition/Extension|4.0.1"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> </element> <element id="Extension.extension:rulesetId.id"> <path value="Extension.extension.id"/> <representation value="xmlAttr"/> <short value="Unique id for inter-element referencing"/> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string"/> </extension> <code value="http://hl7.org/fhirpath/System.String"/> </type> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:rulesetId.extension"> <path value="Extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <rules value="open"/> </slicing> <short value="Additional content defined by implementations"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element|4.0.1"/> </constraint> <constraint> <key value="ext-1"/> <severity value="error"/> <human value="Must have either extensions or value[x], not both"/> <expression value="extension.exists() != value.exists()"/> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), "value")])"/> <source value="http://hl7.org/fhir/StructureDefinition/Extension|4.0.1"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:rulesetId.url"> <path value="Extension.extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="uri"/> </extension> <code value="http://hl7.org/fhirpath/System.String"/> </type> <fixedUri value="rulesetId"/> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:rulesetId.value[x]"> <path value="Extension.extension.value[x]"/> <short value="Id of the TestScript.ruleset"/> <definition value="The TestScript.ruleset id value this assert will evaluate."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="id"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element|4.0.1"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:rule"> <path value="Extension.extension"/> <sliceName value="rule"/> <short value="STU3: The referenced rule within the ruleset (new)"/> <definition value="STU3: `TestScript.setup.action.assert.ruleset.rule` (new:BackboneElement)"/> <comment value="Element `TestScript.setup.action.assert.ruleset.rule` is part of an existing definition because parent element `TestScript.setup.action.assert.ruleset` requires a cross-version extension. Element `TestScript.setup.action.assert.ruleset.rule` has a context of TestScript.setup.action.assert based on following the parent source element upwards and mapping to `TestScript`. Element `TestScript.setup.action.assert.ruleset.rule` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). This qualifies each param name so that a parameter with the same name can be used differently by the different rules with the ruleset."/> <requirements value="Element `TestScript.setup.action.assert.ruleset.rule` is part of an existing definition because parent element `TestScript.setup.action.assert.ruleset` requires a cross-version extension. Element `TestScript.setup.action.assert.ruleset.rule` has a context of TestScript.setup.action.assert based on following the parent source element upwards and mapping to `TestScript`. Element `TestScript.setup.action.assert.ruleset.rule` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element|4.0.1"/> </constraint> <constraint> <key value="ext-1"/> <severity value="error"/> <human value="Must have either extensions or value[x], not both"/> <expression value="extension.exists() != value.exists()"/> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), "value")])"/> <source value="http://hl7.org/fhir/StructureDefinition/Extension|4.0.1"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> </element> <element id="Extension.extension:rule.id"> <path value="Extension.extension.id"/> <representation value="xmlAttr"/> <short value="Unique id for inter-element referencing"/> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string"/> </extension> <code value="http://hl7.org/fhirpath/System.String"/> </type> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:rule.extension"> <path value="Extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <ordered value="false"/> <rules value="open"/> </slicing> <short value="Extension"/> <definition value="An Extension"/> <min value="1"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element|4.0.1"/> </constraint> <constraint> <key value="ext-1"/> <severity value="error"/> <human value="Must have either extensions or value[x], not both"/> <expression value="extension.exists() != value.exists()"/> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), "value")])"/> <source value="http://hl7.org/fhir/StructureDefinition/Extension|4.0.1"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> </element> <element id="Extension.extension:rule.extension:ruleId"> <path value="Extension.extension.extension"/> <sliceName value="ruleId"/> <short value="STU3: Id of referenced rule within the ruleset (new)"/> <definition value="STU3: `TestScript.setup.action.assert.ruleset.rule.ruleId` (new:id)"/> <comment value="Element `TestScript.setup.action.assert.ruleset.rule.ruleId` is part of an existing definition because parent element `TestScript.setup.action.assert.ruleset.rule` requires a cross-version extension. Element `TestScript.setup.action.assert.ruleset.rule.ruleId` has a context of TestScript.setup.action.assert based on following the parent source element upwards and mapping to `TestScript`. Element `TestScript.setup.action.assert.ruleset.rule.ruleId` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `TestScript.setup.action.assert.ruleset.rule.ruleId` is part of an existing definition because parent element `TestScript.setup.action.assert.ruleset.rule` requires a cross-version extension. Element `TestScript.setup.action.assert.ruleset.rule.ruleId` has a context of TestScript.setup.action.assert based on following the parent source element upwards and mapping to `TestScript`. Element `TestScript.setup.action.assert.ruleset.rule.ruleId` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element)."/> <min value="1"/> <max value="1"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element|4.0.1"/> </constraint> <constraint> <key value="ext-1"/> <severity value="error"/> <human value="Must have either extensions or value[x], not both"/> <expression value="extension.exists() != value.exists()"/> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), "value")])"/> <source value="http://hl7.org/fhir/StructureDefinition/Extension|4.0.1"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> </element> <element id="Extension.extension:rule.extension:ruleId.id"> <path value="Extension.extension.extension.id"/> <representation value="xmlAttr"/> <short value="Unique id for inter-element referencing"/> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string"/> </extension> <code value="http://hl7.org/fhirpath/System.String"/> </type> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:rule.extension:ruleId.extension"> <path value="Extension.extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <rules value="open"/> </slicing> <short value="Additional content defined by implementations"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element|4.0.1"/> </constraint> <constraint> <key value="ext-1"/> <severity value="error"/> <human value="Must have either extensions or value[x], not both"/> <expression value="extension.exists() != value.exists()"/> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), "value")])"/> <source value="http://hl7.org/fhir/StructureDefinition/Extension|4.0.1"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:rule.extension:ruleId.url"> <path value="Extension.extension.extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="uri"/> </extension> <code value="http://hl7.org/fhirpath/System.String"/> </type> <fixedUri value="ruleId"/> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:rule.extension:ruleId.value[x]"> <path value="Extension.extension.extension.value[x]"/> <short value="Id of referenced rule within the ruleset"/> <definition value="Id of the referenced rule within the external ruleset template."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="id"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element|4.0.1"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:rule.extension:param"> <path value="Extension.extension.extension"/> <sliceName value="param"/> <short value="STU3: Rule parameter template (new)"/> <definition value="STU3: `TestScript.setup.action.assert.ruleset.rule.param` (new:BackboneElement)"/> <comment value="Element `TestScript.setup.action.assert.ruleset.rule.param` is part of an existing definition because parent element `TestScript.setup.action.assert.ruleset.rule` requires a cross-version extension. Element `TestScript.setup.action.assert.ruleset.rule.param` has a context of TestScript.setup.action.assert based on following the parent source element upwards and mapping to `TestScript`. Element `TestScript.setup.action.assert.ruleset.rule.param` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). The parameter value can be dynamic at runtime."/> <requirements value="Element `TestScript.setup.action.assert.ruleset.rule.param` is part of an existing definition because parent element `TestScript.setup.action.assert.ruleset.rule` requires a cross-version extension. Element `TestScript.setup.action.assert.ruleset.rule.param` has a context of TestScript.setup.action.assert based on following the parent source element upwards and mapping to `TestScript`. Element `TestScript.setup.action.assert.ruleset.rule.param` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element|4.0.1"/> </constraint> <constraint> <key value="ext-1"/> <severity value="error"/> <human value="Must have either extensions or value[x], not both"/> <expression value="extension.exists() != value.exists()"/> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), "value")])"/> <source value="http://hl7.org/fhir/StructureDefinition/Extension|4.0.1"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> </element> <element id="Extension.extension:rule.extension:param.id"> <path value="Extension.extension.extension.id"/> <representation value="xmlAttr"/> <short value="Unique id for inter-element referencing"/> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string"/> </extension> <code value="http://hl7.org/fhirpath/System.String"/> </type> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:rule.extension:param.extension"> <path value="Extension.extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <ordered value="false"/> <rules value="open"/> </slicing> <short value="Extension"/> <definition value="An Extension"/> <min value="2"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element|4.0.1"/> </constraint> <constraint> <key value="ext-1"/> <severity value="error"/> <human value="Must have either extensions or value[x], not both"/> <expression value="extension.exists() != value.exists()"/> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), "value")])"/> <source value="http://hl7.org/fhir/StructureDefinition/Extension|4.0.1"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> </element> <element id="Extension.extension:rule.extension:param.extension:name"> <path value="Extension.extension.extension.extension"/> <sliceName value="name"/> <short value="STU3: Parameter name matching external assert ruleset rule parameter (new)"/> <definition value="STU3: `TestScript.setup.action.assert.ruleset.rule.param.name` (new:string)"/> <comment value="Element `TestScript.setup.action.assert.ruleset.rule.param.name` is part of an existing definition because parent element `TestScript.setup.action.assert.ruleset.rule.param` requires a cross-version extension. Element `TestScript.setup.action.assert.ruleset.rule.param.name` has a context of TestScript.setup.action.assert based on following the parent source element upwards and mapping to `TestScript`. Element `TestScript.setup.action.assert.ruleset.rule.param.name` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). The external rule template would be looking for the parameter by this name."/> <requirements value="Element `TestScript.setup.action.assert.ruleset.rule.param.name` is part of an existing definition because parent element `TestScript.setup.action.assert.ruleset.rule.param` requires a cross-version extension. Element `TestScript.setup.action.assert.ruleset.rule.param.name` has a context of TestScript.setup.action.assert based on following the parent source element upwards and mapping to `TestScript`. Element `TestScript.setup.action.assert.ruleset.rule.param.name` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element)."/> <min value="1"/> <max value="1"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element|4.0.1"/> </constraint> <constraint> <key value="ext-1"/> <severity value="error"/> <human value="Must have either extensions or value[x], not both"/> <expression value="extension.exists() != value.exists()"/> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), "value")])"/> <source value="http://hl7.org/fhir/StructureDefinition/Extension|4.0.1"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> </element> <element id="Extension.extension:rule.extension:param.extension:name.id"> <path value="Extension.extension.extension.extension.id"/> <representation value="xmlAttr"/> <short value="Unique id for inter-element referencing"/> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string"/> </extension> <code value="http://hl7.org/fhirpath/System.String"/> </type> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:rule.extension:param.extension:name.extension"> <path value="Extension.extension.extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <rules value="open"/> </slicing> <short value="Additional content defined by implementations"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element|4.0.1"/> </constraint> <constraint> <key value="ext-1"/> <severity value="error"/> <human value="Must have either extensions or value[x], not both"/> <expression value="extension.exists() != value.exists()"/> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), "value")])"/> <source value="http://hl7.org/fhir/StructureDefinition/Extension|4.0.1"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:rule.extension:param.extension:name.url"> <path value="Extension.extension.extension.extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="uri"/> </extension> <code value="http://hl7.org/fhirpath/System.String"/> </type> <fixedUri value="name"/> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:rule.extension:param.extension:name.value[x]"> <path value="Extension.extension.extension.extension.value[x]"/> <short value="Parameter name matching external assert ruleset rule parameter"/> <definition value="Descriptive name for this parameter that matches the external assert ruleset rule parameter name."/> <comment value="The external rule template would be looking for the parameter by this name."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element|4.0.1"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:rule.extension:param.extension:value"> <path value="Extension.extension.extension.extension"/> <sliceName value="value"/> <short value="STU3: Parameter value defined either explicitly or dynamically (new)"/> <definition value="STU3: `TestScript.setup.action.assert.ruleset.rule.param.value` (new:string)"/> <comment value="Element `TestScript.setup.action.assert.ruleset.rule.param.value` is part of an existing definition because parent element `TestScript.setup.action.assert.ruleset.rule.param` requires a cross-version extension. Element `TestScript.setup.action.assert.ruleset.rule.param.value` has a context of TestScript.setup.action.assert based on following the parent source element upwards and mapping to `TestScript`. Element `TestScript.setup.action.assert.ruleset.rule.param.value` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). This value overwrites the value (if any) specified in TestScript.ruleset.rule.param.value. The param value can be a string-representation of a number, string, or boolean that is expected. Test engines do have to look for placeholders (${}) and replace the variable placeholders with the variable values at runtime before supplying this value to the external rule template."/> <requirements value="Element `TestScript.setup.action.assert.ruleset.rule.param.value` is part of an existing definition because parent element `TestScript.setup.action.assert.ruleset.rule.param` requires a cross-version extension. Element `TestScript.setup.action.assert.ruleset.rule.param.value` has a context of TestScript.setup.action.assert based on following the parent source element upwards and mapping to `TestScript`. Element `TestScript.setup.action.assert.ruleset.rule.param.value` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element)."/> <min value="1"/> <max value="1"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element|4.0.1"/> </constraint> <constraint> <key value="ext-1"/> <severity value="error"/> <human value="Must have either extensions or value[x], not both"/> <expression value="extension.exists() != value.exists()"/> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), "value")])"/> <source value="http://hl7.org/fhir/StructureDefinition/Extension|4.0.1"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> </element> <element id="Extension.extension:rule.extension:param.extension:value.id"> <path value="Extension.extension.extension.extension.id"/> <representation value="xmlAttr"/> <short value="Unique id for inter-element referencing"/> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string"/> </extension> <code value="http://hl7.org/fhirpath/System.String"/> </type> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:rule.extension:param.extension:value.extension"> <path value="Extension.extension.extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <rules value="open"/> </slicing> <short value="Additional content defined by implementations"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element|4.0.1"/> </constraint> <constraint> <key value="ext-1"/> <severity value="error"/> <human value="Must have either extensions or value[x], not both"/> <expression value="extension.exists() != value.exists()"/> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), "value")])"/> <source value="http://hl7.org/fhir/StructureDefinition/Extension|4.0.1"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="Extension.extension:rule.extension:param.extension:value.url"> <path value="Extension.extension.extension.extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="uri"/> </extension> <code value="http://hl7.org/fhirpath/System.String"/> </type> <fixedUri value="value"/> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:rule.extension:param.extension:value.value[x]"> <path value="Extension.extension.extension.extension.value[x]"/> <short value="Parameter value defined either explicitly or dynamically"/> <definition value="The value for the parameter that will be passed on to the external ruleset rule template."/> <comment value="This value overwrites the value (if any) specified in TestScript.ruleset.rule.param.value. The param value can be a string-representation of a number, string, or boolean that is expected. Test engines do have to look for placeholders (${}) and replace the variable placeholders with the variable values at runtime before supplying this value to the external rule template."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element|4.0.1"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:rule.extension:param.url"> <path value="Extension.extension.extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="uri"/> </extension> <code value="http://hl7.org/fhirpath/System.String"/> </type> <fixedUri value="param"/> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:rule.extension:param.value[x]"> <path value="Extension.extension.extension.value[x]"/> <short value="Value of extension"/> <definition value="Value of extension - must be one of a constrained set of the data types (see [Extensibility](http://hl7.org/fhir/R4/extensibility.html) for a list)."/> <min value="0"/> <max value="0"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="base64Binary"/> </type> <type> <code value="boolean"/> </type> <type> <code value="canonical"/> </type> <type> <code value="code"/> </type> <type> <code value="date"/> </type> <type> <code value="dateTime"/> </type> <type> <code value="decimal"/> </type> <type> <code value="id"/> </type> <type> <code value="instant"/> </type> <type> <code value="integer"/> </type> <type> <code value="markdown"/> </type> <type> <code value="oid"/> </type> <type> <code value="positiveInt"/> </type> <type> <code value="string"/> </type> <type> <code value="time"/> </type> <type> <code value="unsignedInt"/> </type> <type> <code value="uri"/> </type> <type> <code value="url"/> </type> <type> <code value="uuid"/> </type> <type> <code value="Address"/> </type> <type> <code value="Age"/> </type> <type> <code value="Annotation"/> </type> <type> <code value="Attachment"/> </type> <type> <code value="CodeableConcept"/> </type> <type> <code value="Coding"/> </type> <type> <code value="ContactPoint"/> </type> <type> <code value="Count"/> </type> <type> <code value="Distance"/> </type> <type> <code value="Duration"/> </type> <type> <code value="HumanName"/> </type> <type> <code value="Identifier"/> </type> <type> <code value="Money"/> </type> <type> <code value="Period"/> </type> <type> <code value="Quantity"/> </type> <type> <code value="Range"/> </type> <type> <code value="Ratio"/> </type> <type> <code value="Reference"/> </type> <type> <code value="SampledData"/> </type> <type> <code value="Signature"/> </type> <type> <code value="Timing"/> </type> <type> <code value="ContactDetail"/> </type> <type> <code value="Contributor"/> </type> <type> <code value="DataRequirement"/> </type> <type> <code value="Expression"/> </type> <type> <code value="ParameterDefinition"/> </type> <type> <code value="RelatedArtifact"/> </type> <type> <code value="TriggerDefinition"/> </type> <type> <code value="UsageContext"/> </type> <type> <code value="Dosage"/> </type> <type> <code value="Meta"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element|4.0.1"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:rule.url"> <path value="Extension.extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="uri"/> </extension> <code value="http://hl7.org/fhirpath/System.String"/> </type> <fixedUri value="rule"/> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.extension:rule.value[x]"> <path value="Extension.extension.value[x]"/> <short value="Value of extension"/> <definition value="Value of extension - must be one of a constrained set of the data types (see [Extensibility](http://hl7.org/fhir/R4/extensibility.html) for a list)."/> <min value="0"/> <max value="0"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="base64Binary"/> </type> <type> <code value="boolean"/> </type> <type> <code value="canonical"/> </type> <type> <code value="code"/> </type> <type> <code value="date"/> </type> <type> <code value="dateTime"/> </type> <type> <code value="decimal"/> </type> <type> <code value="id"/> </type> <type> <code value="instant"/> </type> <type> <code value="integer"/> </type> <type> <code value="markdown"/> </type> <type> <code value="oid"/> </type> <type> <code value="positiveInt"/> </type> <type> <code value="string"/> </type> <type> <code value="time"/> </type> <type> <code value="unsignedInt"/> </type> <type> <code value="uri"/> </type> <type> <code value="url"/> </type> <type> <code value="uuid"/> </type> <type> <code value="Address"/> </type> <type> <code value="Age"/> </type> <type> <code value="Annotation"/> </type> <type> <code value="Attachment"/> </type> <type> <code value="CodeableConcept"/> </type> <type> <code value="Coding"/> </type> <type> <code value="ContactPoint"/> </type> <type> <code value="Count"/> </type> <type> <code value="Distance"/> </type> <type> <code value="Duration"/> </type> <type> <code value="HumanName"/> </type> <type> <code value="Identifier"/> </type> <type> <code value="Money"/> </type> <type> <code value="Period"/> </type> <type> <code value="Quantity"/> </type> <type> <code value="Range"/> </type> <type> <code value="Ratio"/> </type> <type> <code value="Reference"/> </type> <type> <code value="SampledData"/> </type> <type> <code value="Signature"/> </type> <type> <code value="Timing"/> </type> <type> <code value="ContactDetail"/> </type> <type> <code value="Contributor"/> </type> <type> <code value="DataRequirement"/> </type> <type> <code value="Expression"/> </type> <type> <code value="ParameterDefinition"/> </type> <type> <code value="RelatedArtifact"/> </type> <type> <code value="TriggerDefinition"/> </type> <type> <code value="UsageContext"/> </type> <type> <code value="Dosage"/> </type> <type> <code value="Meta"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element|4.0.1"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.url"> <path value="Extension.url"/> <representation value="xmlAttr"/> <short value="identifies the meaning of the extension"/> <definition value="Source of the definition for the extension code - a logical name or a URL."/> <comment value="The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="uri"/> </extension> <code value="http://hl7.org/fhirpath/System.String"/> </type> <fixedUri value="http://hl7.org/fhir/3.0/StructureDefinition/extension-TestScript.setup.action.assert.ruleset"/> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="Extension.value[x]"> <path value="Extension.value[x]"/> <short value="Value of extension"/> <definition value="Value of extension - must be one of a constrained set of the data types (see [Extensibility](http://hl7.org/fhir/R4/extensibility.html) for a list)."/> <min value="0"/> <max value="0"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="base64Binary"/> </type> <type> <code value="boolean"/> </type> <type> <code value="canonical"/> </type> <type> <code value="code"/> </type> <type> <code value="date"/> </type> <type> <code value="dateTime"/> </type> <type> <code value="decimal"/> </type> <type> <code value="id"/> </type> <type> <code value="instant"/> </type> <type> <code value="integer"/> </type> <type> <code value="markdown"/> </type> <type> <code value="oid"/> </type> <type> <code value="positiveInt"/> </type> <type> <code value="string"/> </type> <type> <code value="time"/> </type> <type> <code value="unsignedInt"/> </type> <type> <code value="uri"/> </type> <type> <code value="url"/> </type> <type> <code value="uuid"/> </type> <type> <code value="Address"/> </type> <type> <code value="Age"/> </type> <type> <code value="Annotation"/> </type> <type> <code value="Attachment"/> </type> <type> <code value="CodeableConcept"/> </type> <type> <code value="Coding"/> </type> <type> <code value="ContactPoint"/> </type> <type> <code value="Count"/> </type> <type> <code value="Distance"/> </type> <type> <code value="Duration"/> </type> <type> <code value="HumanName"/> </type> <type> <code value="Identifier"/> </type> <type> <code value="Money"/> </type> <type> <code value="Period"/> </type> <type> <code value="Quantity"/> </type> <type> <code value="Range"/> </type> <type> <code value="Ratio"/> </type> <type> <code value="Reference"/> </type> <type> <code value="SampledData"/> </type> <type> <code value="Signature"/> </type> <type> <code value="Timing"/> </type> <type> <code value="ContactDetail"/> </type> <type> <code value="Contributor"/> </type> <type> <code value="DataRequirement"/> </type> <type> <code value="Expression"/> </type> <type> <code value="ParameterDefinition"/> </type> <type> <code value="RelatedArtifact"/> </type> <type> <code value="TriggerDefinition"/> </type> <type> <code value="UsageContext"/> </type> <type> <code value="Dosage"/> </type> <type> <code value="Meta"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element|4.0.1"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> </snapshot> <differential> <element id="Extension"> <path value="Extension"/> <short value="STU3: The reference to a TestScript.ruleset (new)"/> <definition value="STU3: `TestScript.setup.action.assert.ruleset` (new:BackboneElement)"/> <comment value="Element `TestScript.setup.action.assert.ruleset` has a context of TestScript.setup.action.assert based on following the parent source element upwards and mapping to `TestScript`. Element `TestScript.setup.action.assert.ruleset` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). Each rule within a ruleset should get evaluated by test engines as a separate assertion. The impact of negative rule evaluation on test script execution is the same as an assertion failure which is descibed elsewhere in the TestScript resource. If the first rule within the ruleset results in a failed assertion, then test engines do not have to evaluate the rest of the rules within the ruleset."/> <min value="0"/> <max value="1"/> <base> <path value="Extension"/> <min value="0"/> <max value="*"/> </base> <isModifier value="false"/> </element> <element id="Extension.extension"> <path value="Extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <ordered value="false"/> <rules value="open"/> </slicing> <min value="1"/> <max value="*"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:rulesetId"> <path value="Extension.extension"/> <sliceName value="rulesetId"/> <short value="STU3: Id of the TestScript.ruleset (new)"/> <definition value="STU3: `TestScript.setup.action.assert.ruleset.rulesetId` (new:id)"/> <comment value="Element `TestScript.setup.action.assert.ruleset.rulesetId` is part of an existing definition because parent element `TestScript.setup.action.assert.ruleset` requires a cross-version extension. Element `TestScript.setup.action.assert.ruleset.rulesetId` has a context of TestScript.setup.action.assert based on following the parent source element upwards and mapping to `TestScript`. Element `TestScript.setup.action.assert.ruleset.rulesetId` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `TestScript.setup.action.assert.ruleset.rulesetId` is part of an existing definition because parent element `TestScript.setup.action.assert.ruleset` requires a cross-version extension. Element `TestScript.setup.action.assert.ruleset.rulesetId` has a context of TestScript.setup.action.assert based on following the parent source element upwards and mapping to `TestScript`. Element `TestScript.setup.action.assert.ruleset.rulesetId` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element)."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:rulesetId.url"> <path value="Extension.extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="rulesetId"/> </element> <element id="Extension.extension:rulesetId.value[x]"> <path value="Extension.extension.value[x]"/> <short value="Id of the TestScript.ruleset"/> <definition value="The TestScript.ruleset id value this assert will evaluate."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="id"/> </type> </element> <element id="Extension.extension:rule"> <path value="Extension.extension"/> <sliceName value="rule"/> <short value="STU3: The referenced rule within the ruleset (new)"/> <definition value="STU3: `TestScript.setup.action.assert.ruleset.rule` (new:BackboneElement)"/> <comment value="Element `TestScript.setup.action.assert.ruleset.rule` is part of an existing definition because parent element `TestScript.setup.action.assert.ruleset` requires a cross-version extension. Element `TestScript.setup.action.assert.ruleset.rule` has a context of TestScript.setup.action.assert based on following the parent source element upwards and mapping to `TestScript`. Element `TestScript.setup.action.assert.ruleset.rule` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). This qualifies each param name so that a parameter with the same name can be used differently by the different rules with the ruleset."/> <requirements value="Element `TestScript.setup.action.assert.ruleset.rule` is part of an existing definition because parent element `TestScript.setup.action.assert.ruleset` requires a cross-version extension. Element `TestScript.setup.action.assert.ruleset.rule` has a context of TestScript.setup.action.assert based on following the parent source element upwards and mapping to `TestScript`. Element `TestScript.setup.action.assert.ruleset.rule` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="*"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:rule.extension"> <path value="Extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <ordered value="false"/> <rules value="open"/> </slicing> <min value="1"/> <max value="*"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:rule.extension:ruleId"> <path value="Extension.extension.extension"/> <sliceName value="ruleId"/> <short value="STU3: Id of referenced rule within the ruleset (new)"/> <definition value="STU3: `TestScript.setup.action.assert.ruleset.rule.ruleId` (new:id)"/> <comment value="Element `TestScript.setup.action.assert.ruleset.rule.ruleId` is part of an existing definition because parent element `TestScript.setup.action.assert.ruleset.rule` requires a cross-version extension. Element `TestScript.setup.action.assert.ruleset.rule.ruleId` has a context of TestScript.setup.action.assert based on following the parent source element upwards and mapping to `TestScript`. Element `TestScript.setup.action.assert.ruleset.rule.ruleId` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element)."/> <requirements value="Element `TestScript.setup.action.assert.ruleset.rule.ruleId` is part of an existing definition because parent element `TestScript.setup.action.assert.ruleset.rule` requires a cross-version extension. Element `TestScript.setup.action.assert.ruleset.rule.ruleId` has a context of TestScript.setup.action.assert based on following the parent source element upwards and mapping to `TestScript`. Element `TestScript.setup.action.assert.ruleset.rule.ruleId` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element)."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:rule.extension:ruleId.url"> <path value="Extension.extension.extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="ruleId"/> </element> <element id="Extension.extension:rule.extension:ruleId.value[x]"> <path value="Extension.extension.extension.value[x]"/> <short value="Id of referenced rule within the ruleset"/> <definition value="Id of the referenced rule within the external ruleset template."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="id"/> </type> </element> <element id="Extension.extension:rule.extension:param"> <path value="Extension.extension.extension"/> <sliceName value="param"/> <short value="STU3: Rule parameter template (new)"/> <definition value="STU3: `TestScript.setup.action.assert.ruleset.rule.param` (new:BackboneElement)"/> <comment value="Element `TestScript.setup.action.assert.ruleset.rule.param` is part of an existing definition because parent element `TestScript.setup.action.assert.ruleset.rule` requires a cross-version extension. Element `TestScript.setup.action.assert.ruleset.rule.param` has a context of TestScript.setup.action.assert based on following the parent source element upwards and mapping to `TestScript`. Element `TestScript.setup.action.assert.ruleset.rule.param` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). The parameter value can be dynamic at runtime."/> <requirements value="Element `TestScript.setup.action.assert.ruleset.rule.param` is part of an existing definition because parent element `TestScript.setup.action.assert.ruleset.rule` requires a cross-version extension. Element `TestScript.setup.action.assert.ruleset.rule.param` has a context of TestScript.setup.action.assert based on following the parent source element upwards and mapping to `TestScript`. Element `TestScript.setup.action.assert.ruleset.rule.param` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element)."/> <min value="0"/> <max value="*"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:rule.extension:param.extension"> <path value="Extension.extension.extension.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <ordered value="false"/> <rules value="open"/> </slicing> <min value="2"/> <max value="*"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:rule.extension:param.extension:name"> <path value="Extension.extension.extension.extension"/> <sliceName value="name"/> <short value="STU3: Parameter name matching external assert ruleset rule parameter (new)"/> <definition value="STU3: `TestScript.setup.action.assert.ruleset.rule.param.name` (new:string)"/> <comment value="Element `TestScript.setup.action.assert.ruleset.rule.param.name` is part of an existing definition because parent element `TestScript.setup.action.assert.ruleset.rule.param` requires a cross-version extension. Element `TestScript.setup.action.assert.ruleset.rule.param.name` has a context of TestScript.setup.action.assert based on following the parent source element upwards and mapping to `TestScript`. Element `TestScript.setup.action.assert.ruleset.rule.param.name` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). The external rule template would be looking for the parameter by this name."/> <requirements value="Element `TestScript.setup.action.assert.ruleset.rule.param.name` is part of an existing definition because parent element `TestScript.setup.action.assert.ruleset.rule.param` requires a cross-version extension. Element `TestScript.setup.action.assert.ruleset.rule.param.name` has a context of TestScript.setup.action.assert based on following the parent source element upwards and mapping to `TestScript`. Element `TestScript.setup.action.assert.ruleset.rule.param.name` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element)."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:rule.extension:param.extension:name.url"> <path value="Extension.extension.extension.extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="name"/> </element> <element id="Extension.extension:rule.extension:param.extension:name.value[x]"> <path value="Extension.extension.extension.extension.value[x]"/> <short value="Parameter name matching external assert ruleset rule parameter"/> <definition value="Descriptive name for this parameter that matches the external assert ruleset rule parameter name."/> <comment value="The external rule template would be looking for the parameter by this name."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> </element> <element id="Extension.extension:rule.extension:param.extension:value"> <path value="Extension.extension.extension.extension"/> <sliceName value="value"/> <short value="STU3: Parameter value defined either explicitly or dynamically (new)"/> <definition value="STU3: `TestScript.setup.action.assert.ruleset.rule.param.value` (new:string)"/> <comment value="Element `TestScript.setup.action.assert.ruleset.rule.param.value` is part of an existing definition because parent element `TestScript.setup.action.assert.ruleset.rule.param` requires a cross-version extension. Element `TestScript.setup.action.assert.ruleset.rule.param.value` has a context of TestScript.setup.action.assert based on following the parent source element upwards and mapping to `TestScript`. Element `TestScript.setup.action.assert.ruleset.rule.param.value` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). This value overwrites the value (if any) specified in TestScript.ruleset.rule.param.value. The param value can be a string-representation of a number, string, or boolean that is expected. Test engines do have to look for placeholders (${}) and replace the variable placeholders with the variable values at runtime before supplying this value to the external rule template."/> <requirements value="Element `TestScript.setup.action.assert.ruleset.rule.param.value` is part of an existing definition because parent element `TestScript.setup.action.assert.ruleset.rule.param` requires a cross-version extension. Element `TestScript.setup.action.assert.ruleset.rule.param.value` has a context of TestScript.setup.action.assert based on following the parent source element upwards and mapping to `TestScript`. Element `TestScript.setup.action.assert.ruleset.rule.param.value` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element)."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.extension"/> <min value="0"/> <max value="*"/> </base> </element> <element id="Extension.extension:rule.extension:param.extension:value.url"> <path value="Extension.extension.extension.extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="value"/> </element> <element id="Extension.extension:rule.extension:param.extension:value.value[x]"> <path value="Extension.extension.extension.extension.value[x]"/> <short value="Parameter value defined either explicitly or dynamically"/> <definition value="The value for the parameter that will be passed on to the external ruleset rule template."/> <comment value="This value overwrites the value (if any) specified in TestScript.ruleset.rule.param.value. The param value can be a string-representation of a number, string, or boolean that is expected. Test engines do have to look for placeholders (${}) and replace the variable placeholders with the variable values at runtime before supplying this value to the external rule template."/> <min value="1"/> <max value="1"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> </element> <element id="Extension.extension:rule.extension:param.url"> <path value="Extension.extension.extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="param"/> </element> <element id="Extension.extension:rule.extension:param.value[x]"> <path value="Extension.extension.extension.value[x]"/> <min value="0"/> <max value="0"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> </element> <element id="Extension.extension:rule.url"> <path value="Extension.extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="rule"/> </element> <element id="Extension.extension:rule.value[x]"> <path value="Extension.extension.value[x]"/> <min value="0"/> <max value="0"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> </element> <element id="Extension.url"> <path value="Extension.url"/> <min value="1"/> <max value="1"/> <base> <path value="Extension.url"/> <min value="1"/> <max value="1"/> </base> <fixedUri value="http://hl7.org/fhir/3.0/StructureDefinition/extension-TestScript.setup.action.assert.ruleset"/> </element> <element id="Extension.value[x]"> <path value="Extension.value[x]"/> <min value="0"/> <max value="0"/> <base> <path value="Extension.value[x]"/> <min value="0"/> <max value="1"/> </base> </element> </differential> </StructureDefinition>

Generated Narrative: StructureDefinition ext-R3-TestScript.set.act.ass.ruleset

Name	Card.	Type	Description & Constraints
Extension	0..1	Extension(4.0.1)	STU3: The reference to a TestScript.ruleset (new)
Slices for extension	1..*	Extension	Extension Slice: Unordered, Open by value:url
extension:rulesetId	1..1	Extension	STU3: Id of the TestScript.ruleset (new)
url	1..1	uri	"rulesetId"
value[x]	1..1	id	Id of the TestScript.ruleset
extension:rule	0..*	Extension	STU3: The referenced rule within the ruleset (new)
Slices for extension	1..*	Extension	Extension Slice: Unordered, Open by value:url
extension:ruleId	1..1	Extension	STU3: Id of referenced rule within the ruleset (new)
url	1..1	uri	"ruleId"
value[x]	1..1	id	Id of referenced rule within the ruleset
extension:param	0..*	Extension	STU3: Rule parameter template (new)
Slices for extension	2..*	Extension	Extension Slice: Unordered, Open by value:url
extension:name	1..1	Extension	STU3: Parameter name matching external assert ruleset rule parameter (new)
url	1..1	uri	"name"
value[x]	1..1	string	Parameter name matching external assert ruleset rule parameter
extension:value	1..1	Extension	STU3: Parameter value defined either explicitly or dynamically (new)
url	1..1	uri	"value"
value[x]	1..1	string	Parameter value defined either explicitly or dynamically
url	1..1	uri	"param"
value[x]	0..0		Value of extension
url	1..1	uri	"rule"
value[x]	0..0		Value of extension
url	1..1	uri	"http://hl7.org/fhir/3.0/StructureDefinition/extension-TestScript.setup.action.assert.ruleset"
value[x]	0..0		Value of extension
Documentation for this format