Extensions for Using Data Elements from FHIR DSTU2 in FHIR R5
0.1.0 - STU International flag

Extensions for Using Data Elements from FHIR DSTU2 in FHIR R5 - Downloaded Version null See the Directory of published versions

Resource Profile: Profile_R2_Medication_R5 - Detailed Descriptions

Page standards status: Trial-use Maturity Level: 0

Definitions for the profile-Medication resource profile.

Guidance on how to interpret the contents of this table can be foundhere

0. Medication
Definition

This resource is primarily used for the identification and definition of a medication, including ingredients, for the purposes of prescribing, dispensing, and administering a medication as well as for making statements about medication use.

ShortDefinition of a Medication
Control0..*
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. Medication.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. Medication.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

ShortContained, inline Resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.

Control0..*
This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5
TypeResource
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate Namesinline resources, anonymous resources, contained resources
6. Medication.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Medication.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 8. Medication.extension:isBrand
    Slice NameisBrand
    Definition

    DSTU2: Medication.isBrand (new:boolean)

    ShortDSTU2: True if a brand (new)
    Comments

    Element Medication.isBrand has a context of Medication based on following the parent source element upwards and mapping to Medication. Element Medication.isBrand has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).

    Control0..1
    TypeExtension(DSTU2: True if a brand (new)) (Extension Type: boolean)
    Is Modifierfalse
    Must Supportfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    10. Medication.extension:batch
    Slice Namebatch
    Definition

    DSTU2: Medication.product.batch (new:BackboneElement)

    ShortDSTU2: (new)
    Comments

    Element Medication.product.batch has a context of Medication based on following the parent source element upwards and mapping to Medication. Element Medication.product.batch has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).

    Control0..*
    TypeExtension(DSTU2: (new)) (Complex Extension)
    Is Modifierfalse
    Must Supportfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    12. Medication.extension:package
    Slice Namepackage
    Definition

    DSTU2: Medication.package (new:BackboneElement)

    ShortDSTU2: Details about packaged medications (new)
    Comments

    Element Medication.package has a context of Medication based on following the parent source element upwards and mapping to Medication. Element Medication.package has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).

    Control0..1
    TypeExtension(DSTU2: Details about packaged medications (new)) (Complex Extension)
    Is Modifierfalse
    Must Supportfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    14. Medication.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
    Must Supportfalse
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    16. Medication.status
    Definition

    A code to indicate if the medication is in active use.

    Shortactive | inactive | entered-in-error
    Comments

    This status is intended to identify if the medication in a local system is in active use within a drug database or inventory. For example, a pharmacy system may create a new drug file record for a compounded product "ABC Hospital Special Cream" with an active status. At some point in the future, it may be determined that the drug record was created with an error and the status is changed to "entered in error". This status is not intended to specify if a medication is part of a particular formulary. It is possible that the drug record may be referenced by multiple formularies or catalogues and each of those entries would have a separate status.

    Control0..1
    BindingThe codes SHALL be taken from MedicationStatusCodeshttp://hl7.org/fhir/ValueSet/medication-status|5.0.0
    (required to http://hl7.org/fhir/ValueSet/medication-status|5.0.0)

    A coded concept defining if the medication is in active use.

    Typecode
    Is Modifiertrue because This element changes the interpretation of all descriptive attributes.
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supportfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

    Guidance on how to interpret the contents of this table can be foundhere

    0. Medication
    2. Medication.meta
    4. Medication.meta.extension
    Control0..*
    SlicingThis element introduces a set of slices on Medication.meta.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • 6. Medication.meta.extension:meta
      Slice Namemeta
      Definition

      DSTU2: Medication.meta additional types (Meta) additional types from child elements (lastUpdated, profile, security, tag, versionId)

      ShortDSTU2: meta additional types
      Comments

      Element Medication.meta is mapped to FHIR R5 element Medication.meta as SourceIsBroaderThanTarget. The mappings for Medication.meta do not cover the following types: Meta. The mappings for Medication.meta do not cover the following types based on type expansion: lastUpdated, profile, security, tag, versionId.

      Control0..1
      TypeExtension(DSTU2: meta additional types) (Extension Type: Meta)
      8. Medication.text
      10. Medication.text.extension
      Control0..*
      SlicingThis element introduces a set of slices on Medication.text.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 12. Medication.text.extension:text
        Slice Nametext
        Definition

        DSTU2: Medication.text additional types (Narrative) additional types from child elements (div, status)

        ShortDSTU2: text additional types
        Comments

        Element Medication.text is mapped to FHIR R5 element Medication.text as SourceIsBroaderThanTarget. The mappings for Medication.text do not cover the following types: Narrative. The mappings for Medication.text do not cover the following types based on type expansion: div, status. Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative.

        Control0..1
        TypeExtension(DSTU2: text additional types) (Complex Extension)
        14. Medication.extension
        Control0..*
        SlicingThis element introduces a set of slices on Medication.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 16. Medication.extension:isBrand
          Slice NameisBrand
          Definition

          DSTU2: Medication.isBrand (new:boolean)

          ShortDSTU2: True if a brand (new)
          Comments

          Element Medication.isBrand has a context of Medication based on following the parent source element upwards and mapping to Medication. Element Medication.isBrand has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).

          Control0..1
          TypeExtension(DSTU2: True if a brand (new)) (Extension Type: boolean)
          18. Medication.extension:batch
          Slice Namebatch
          Definition

          DSTU2: Medication.product.batch (new:BackboneElement)

          ShortDSTU2: (new)
          Comments

          Element Medication.product.batch has a context of Medication based on following the parent source element upwards and mapping to Medication. Element Medication.product.batch has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).

          Control0..*
          TypeExtension(DSTU2: (new)) (Complex Extension)
          20. Medication.extension:package
          Slice Namepackage
          Definition

          DSTU2: Medication.package (new:BackboneElement)

          ShortDSTU2: Details about packaged medications (new)
          Comments

          Element Medication.package has a context of Medication based on following the parent source element upwards and mapping to Medication. Element Medication.package has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).

          Control0..1
          TypeExtension(DSTU2: Details about packaged medications (new)) (Complex Extension)
          22. Medication.marketingAuthorizationHolder
          24. Medication.marketingAuthorizationHolder.extension
          Control0..*
          SlicingThis element introduces a set of slices on Medication.marketingAuthorizationHolder.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ url
          • 26. Medication.marketingAuthorizationHolder.extension:manufacturer
            Slice Namemanufacturer
            Definition

            DSTU2: Medication.manufacturer additional types from child elements (display, reference)

            ShortDSTU2: Manufacturer of the item additional types
            Comments

            Element Medication.manufacturer is mapped to FHIR R5 element Medication.marketingAuthorizationHolder as SourceIsBroaderThanTarget. The mappings for Medication.manufacturer do not cover the following types based on type expansion: display, reference. The standard extension alternate-reference has been mapped as the representation of FHIR DSTU2 element Medication.manufacturer with unmapped reference targets: Organization.

            Control0..1
            TypeExtension(Alternate Reference) (Extension Type: Reference(Resource))

            Guidance on how to interpret the contents of this table can be foundhere

            0. Medication
            Definition

            This resource is primarily used for the identification and definition of a medication, including ingredients, for the purposes of prescribing, dispensing, and administering a medication as well as for making statements about medication use.

            ShortDefinition of a Medication
            Control0..*
            Is Modifierfalse
            Must Supportfalse
            Summaryfalse
            Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
            dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
            dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
            dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
            dom-6: A resource should have narrative for robust management (text.`div`.exists())
            2. Medication.id
            Definition

            The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

            ShortLogical id of this artifact
            Comments

            Within the context of the FHIR RESTful interactions, the resource has an id except for cases like the create and conditional update. Otherwise, the use of the resouce id depends on the given use case.

            Control0..1
            Typeid
            Is Modifierfalse
            Must Supportfalse
            Summarytrue
            4. Medication.meta
            Definition

            The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

            ShortMetadata about the resource
            Control0..1
            TypeMeta
            Is Modifierfalse
            Must Supportfalse
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            6. Medication.meta.id
            Definition

            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            ShortUnique id for inter-element referencing
            Control0..1
            This element is affected by the following invariants: ele-1
            Typeid
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            8. Medication.meta.extension
            Definition

            An Extension

            ShortExtension
            Control0..*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            SlicingThis element introduces a set of slices on Medication.meta.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • value @ url
            • 10. Medication.meta.extension:meta
              Slice Namemeta
              Definition

              DSTU2: Medication.meta additional types (Meta) additional types from child elements (lastUpdated, profile, security, tag, versionId)

              ShortDSTU2: meta additional types
              Comments

              Element Medication.meta is mapped to FHIR R5 element Medication.meta as SourceIsBroaderThanTarget. The mappings for Medication.meta do not cover the following types: Meta. The mappings for Medication.meta do not cover the following types based on type expansion: lastUpdated, profile, security, tag, versionId.

              Control0..1
              TypeExtension(DSTU2: meta additional types) (Extension Type: Meta)
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              12. Medication.meta.versionId
              Definition

              The version specific identifier, as it appears in the version portion of the URL. This value changes when the resource is created, updated, or deleted.

              ShortVersion specific identifier
              Comments

              The server assigns this value, and ignores what the client specifies, except in the case that the server is imposing version integrity on updates/deletes.

              Control0..1
              Typeid
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              14. Medication.meta.lastUpdated
              Definition

              When the resource last changed - e.g. when the version changed.

              ShortWhen the resource version last changed
              Comments

              This element is generally omitted in instances submitted in a PUT or POST. Instead, it is populated in the response instance and when retrieving information using a GET. The server / resource manager sets this value; what a client provides is irrelevant. This is equivalent to the HTTP Last-Modified and SHOULD have the same value on a read interaction.

              Control0..1
              Typeinstant
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              16. Medication.meta.source
              Definition

              A uri that identifies the source system of the resource. This provides a minimal amount of Provenance information that can be used to track or differentiate the source of information in the resource. The source may identify another FHIR server, document, message, database, etc.

              ShortIdentifies where the resource comes from
              Comments

              The exact use of the source (and the possible implied Provenance.entity.role and agent.role) is left to implementer discretion. Only one nominated source is allowed; for additional provenance details, a full Provenance resource should be used. The source may correspond to Provenance.entity.what[x] or Provenance.agent.who[x], though it may be a more general or abstract reference.

              This element can be used to indicate where the current master source of a resource that has a canonical URL if the resource is no longer hosted at the canonical URL.

              Control0..1
              Typeuri
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              18. Medication.meta.profile
              Definition

              A list of profiles (references to StructureDefinition resources) that this resource claims to conform to. The URL is a reference to StructureDefinition.url.

              ShortProfiles this resource claims to conform to
              Comments

              It is up to the server and/or other infrastructure of policy to determine whether/how these claims are verified and/or updated over time. The list of profile URLs is a set.

              Control0..*
              Typecanonical(StructureDefinition)
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              20. Medication.meta.security
              Definition

              Security labels applied to this resource. These tags connect specific resources to the overall security policy and infrastructure.

              ShortSecurity Labels applied to this resource
              Comments

              The security labels can be updated without changing the stated version of the resource. The list of security labels is a set. Uniqueness is based the system/code, and version and display are ignored.

              Control0..*
              BindingUnless not suitable, these codes SHALL be taken from AllSecurityLabels .
              (extensible to http://hl7.org/fhir/ValueSet/security-labels|5.0.0)

              Security Labels from the Healthcare Privacy and Security Classification System.

              TypeCoding
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              22. Medication.meta.tag
              Definition

              Tags applied to this resource. Tags are intended to be used to identify and relate resources to process and workflow, and applications are not required to consider the tags when interpreting the meaning of a resource.

              ShortTags applied to this resource
              Comments

              The tags can be updated without changing the stated version of the resource. The list of tags is a set. Uniqueness is based the system/code, and version and display are ignored.

              Control0..*
              BindingFor example codes, see CommonTags
              (example to http://hl7.org/fhir/ValueSet/common-tags|5.0.0)

              Codes that represent various types of tags, commonly workflow-related; e.g. "Needs review by Dr. Jones".

              TypeCoding
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              24. Medication.implicitRules
              Definition

              A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

              ShortA set of rules under which this content was created
              Comments

              Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

              Control0..1
              Typeuri
              Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supportfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              26. Medication.language
              Definition

              The base language in which the resource is written.

              ShortLanguage of the resource content
              Comments

              Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

              Control0..1
              BindingThe codes SHALL be taken from AllLanguages
              (required to http://hl7.org/fhir/ValueSet/all-languages|5.0.0)

              IETF language tag for a human language

              Typecode
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supportfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              28. Medication.text
              Definition

              A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

              ShortText summary of the resource, for human interpretation
              Comments

              Contained resources do not have a narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

              Control0..1
              This element is affected by the following invariants: dom-6
              TypeNarrative
              Is Modifierfalse
              Must Supportfalse
              Summaryfalse
              Alternate Namesnarrative, html, xhtml, display
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              30. Medication.text.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              This element is affected by the following invariants: ele-1
              Typeid
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              32. Medication.text.extension
              Definition

              An Extension

              ShortExtension
              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              SlicingThis element introduces a set of slices on Medication.text.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
              • value @ url
              • 34. Medication.text.extension:text
                Slice Nametext
                Definition

                DSTU2: Medication.text additional types (Narrative) additional types from child elements (div, status)

                ShortDSTU2: text additional types
                Comments

                Element Medication.text is mapped to FHIR R5 element Medication.text as SourceIsBroaderThanTarget. The mappings for Medication.text do not cover the following types: Narrative. The mappings for Medication.text do not cover the following types based on type expansion: div, status. Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative.

                Control0..1
                TypeExtension(DSTU2: text additional types) (Complex Extension)
                Is Modifierfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                36. Medication.text.status
                Definition

                The status of the narrative - whether it's entirely generated (from just the defined data or the extensions too), or whether a human authored it and it may contain additional data.

                Shortgenerated | extensions | additional | empty
                Control1..1
                BindingThe codes SHALL be taken from NarrativeStatus
                (required to http://hl7.org/fhir/ValueSet/narrative-status|5.0.0)

                The status of a resource narrative.

                Typecode
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                38. Medication.text.div
                Definition

                The actual narrative content, a stripped down version of XHTML.

                ShortLimited xhtml content
                Comments

                The contents of the html element are an XHTML fragment containing only the basic html formatting elements described in chapters 7-11 and 15 of the HTML 4.0 standard, <a> elements (either name or href), images and internally contained stylesheets. The XHTML content SHALL NOT contain a head, a body, external stylesheet references, scripts, forms, base/link/xlink, frames, iframes and objects.

                Control1..1
                Typexhtml
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                txt-1: The narrative SHALL contain only the basic html formatting elements and attributes described in chapters 7-11 (except section 4 of chapter 9) and 15 of the HTML 4.0 standard, <a> elements (either name or href), images and internally contained style attributes (htmlChecks())
                txt-2: The narrative SHALL have some non-whitespace content (htmlChecks())
                40. Medication.contained
                Definition

                These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

                ShortContained, inline Resources
                Comments

                This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.

                Control0..*
                This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5
                TypeResource
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Alternate Namesinline resources, anonymous resources, contained resources
                42. Medication.extension
                Definition

                An Extension

                ShortExtension
                Control0..*
                TypeExtension
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                SlicingThis element introduces a set of slices on Medication.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                • value @ url
                • 44. Medication.extension:isBrand
                  Slice NameisBrand
                  Definition

                  DSTU2: Medication.isBrand (new:boolean)

                  ShortDSTU2: True if a brand (new)
                  Comments

                  Element Medication.isBrand has a context of Medication based on following the parent source element upwards and mapping to Medication. Element Medication.isBrand has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).

                  Control0..1
                  TypeExtension(DSTU2: True if a brand (new)) (Extension Type: boolean)
                  Is Modifierfalse
                  Must Supportfalse
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  46. Medication.extension:batch
                  Slice Namebatch
                  Definition

                  DSTU2: Medication.product.batch (new:BackboneElement)

                  ShortDSTU2: (new)
                  Comments

                  Element Medication.product.batch has a context of Medication based on following the parent source element upwards and mapping to Medication. Element Medication.product.batch has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).

                  Control0..*
                  TypeExtension(DSTU2: (new)) (Complex Extension)
                  Is Modifierfalse
                  Must Supportfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  48. Medication.extension:package
                  Slice Namepackage
                  Definition

                  DSTU2: Medication.package (new:BackboneElement)

                  ShortDSTU2: Details about packaged medications (new)
                  Comments

                  Element Medication.package has a context of Medication based on following the parent source element upwards and mapping to Medication. Element Medication.package has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).

                  Control0..1
                  TypeExtension(DSTU2: Details about packaged medications (new)) (Complex Extension)
                  Is Modifierfalse
                  Must Supportfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  50. Medication.modifierExtension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                  ShortExtensions that cannot be ignored
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
                  Must Supportfalse
                  Summarytrue
                  Requirements

                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                  Alternate Namesextensions, user content
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  52. Medication.identifier
                  Definition

                  Business identifier for this medication.

                  ShortBusiness identifier for this medication
                  Comments

                  The serial number could be included as an identifier.

                  NoteThis is a business identifier, not a resource identifier (see discussion)
                  Control0..*
                  TypeIdentifier
                  Is Modifierfalse
                  Must Supportfalse
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  54. Medication.code
                  Definition

                  A code (or set of codes) that specify this medication, or a textual description if no code is available. Usage note: This could be a standard medication code such as a code from RxNorm, SNOMED CT, IDMP etc. It could also be a national or local formulary code, optionally with translations to other code systems.

                  ShortCodes that identify this medication
                  Comments

                  Depending on the context of use, the code that was actually selected by the user (prescriber, dispenser, etc.) will have the coding.userSelected set to true. As described in the coding datatype: "A coding may be marked as a "userSelected" if a user selected the particular coded value in a user interface (e.g. the user selects an item in a pick-list). If a user selected coding exists, it is the preferred choice for performing translations etc. Other codes can only be literal translations to alternative code systems, or codes at a lower level of granularity (e.g. a generic code for a vendor-specific primary one).

                  Control0..1
                  BindingFor example codes, see SNOMEDCTMedicationCodes
                  (example to http://hl7.org/fhir/ValueSet/medication-codes|5.0.0)

                  A coded concept that defines the type of a medication.

                  TypeCodeableConcept
                  Is Modifierfalse
                  Must Supportfalse
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  56. Medication.status
                  Definition

                  A code to indicate if the medication is in active use.

                  Shortactive | inactive | entered-in-error
                  Comments

                  This status is intended to identify if the medication in a local system is in active use within a drug database or inventory. For example, a pharmacy system may create a new drug file record for a compounded product "ABC Hospital Special Cream" with an active status. At some point in the future, it may be determined that the drug record was created with an error and the status is changed to "entered in error". This status is not intended to specify if a medication is part of a particular formulary. It is possible that the drug record may be referenced by multiple formularies or catalogues and each of those entries would have a separate status.

                  Control0..1
                  BindingThe codes SHALL be taken from MedicationStatusCodes
                  (required to http://hl7.org/fhir/ValueSet/medication-status|5.0.0)

                  A coded concept defining if the medication is in active use.

                  Typecode
                  Is Modifiertrue because This element changes the interpretation of all descriptive attributes.
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Must Supportfalse
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  58. Medication.marketingAuthorizationHolder
                  Definition

                  The company or other legal entity that has authorization, from the appropriate drug regulatory authority, to market a medicine in one or more jurisdictions. Typically abbreviated MAH.Note: The MAH may manufacture the product and may also contract the manufacturing of the product to one or more companies (organizations).

                  ShortOrganization that has authorization to market medication
                  Control0..1
                  TypeReference(Organization)
                  Is Modifierfalse
                  Must Supportfalse
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  60. Medication.marketingAuthorizationHolder.id
                  Definition

                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                  ShortUnique id for inter-element referencing
                  Control0..1
                  This element is affected by the following invariants: ele-1
                  Typeid
                  Is Modifierfalse
                  XML FormatIn the XML format, this property is represented as an attribute.
                  Summaryfalse
                  62. Medication.marketingAuthorizationHolder.extension
                  Definition

                  An Extension

                  ShortExtension
                  Control0..*
                  TypeExtension
                  Is Modifierfalse
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  SlicingThis element introduces a set of slices on Medication.marketingAuthorizationHolder.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                  • value @ url
                  • 64. Medication.marketingAuthorizationHolder.extension:manufacturer
                    Slice Namemanufacturer
                    Definition

                    DSTU2: Medication.manufacturer additional types from child elements (display, reference)

                    ShortDSTU2: Manufacturer of the item additional types
                    Comments

                    Element Medication.manufacturer is mapped to FHIR R5 element Medication.marketingAuthorizationHolder as SourceIsBroaderThanTarget. The mappings for Medication.manufacturer do not cover the following types based on type expansion: display, reference. The standard extension alternate-reference has been mapped as the representation of FHIR DSTU2 element Medication.manufacturer with unmapped reference targets: Organization.

                    Control0..1
                    TypeExtension(Alternate Reference) (Extension Type: Reference(Resource))
                    Is Modifierfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    66. Medication.marketingAuthorizationHolder.reference
                    Definition

                    A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

                    ShortLiteral reference, Relative, internal or absolute URL
                    Comments

                    Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

                    Control0..1
                    This element is affected by the following invariants: ref-2, ref-1
                    Typestring
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    68. Medication.marketingAuthorizationHolder.type
                    Definition

                    The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

                    The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

                    ShortType the reference refers to (e.g. "Patient") - must be a resource in resources
                    Comments

                    This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a known RESTful URL) or by resolving the target of the reference.

                    Control0..1
                    BindingUnless not suitable, these codes SHALL be taken from ResourceType .
                    (extensible to http://hl7.org/fhir/ValueSet/resource-types|5.0.0)

                    Aa resource (or, for logical models, the URI of the logical model).

                    Typeuri
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    70. Medication.marketingAuthorizationHolder.identifier
                    Definition

                    An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

                    ShortLogical reference, when literal reference is not known
                    Comments

                    When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

                    When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

                    Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

                    Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

                    This element only allows for a single identifier. In the case where additional identifers are required, use the http://hl7.org/fhir/StructureDefinition/additionalIdentifier extension.

                    NoteThis is a business identifier, not a resource identifier (see discussion)
                    Control0..1
                    This element is affected by the following invariants: ref-2
                    TypeIdentifier
                    Is Modifierfalse
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    72. Medication.marketingAuthorizationHolder.display
                    Definition

                    Plain text narrative that identifies the resource in addition to the resource reference.

                    ShortText alternative for the resource
                    Comments

                    This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

                    Control0..1
                    This element is affected by the following invariants: ref-2
                    Typestring
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    74. Medication.doseForm
                    Definition

                    Describes the form of the item. Powder; tablets; capsule.

                    Shortpowder | tablets | capsule +
                    Comments

                    When Medication is referenced from MedicationRequest, this is the ordered form. When Medication is referenced within MedicationDispense, this is the dispensed form. When Medication is referenced within MedicationAdministration, this is administered form.

                    Control0..1
                    BindingFor example codes, see SNOMEDCTFormCodes
                    (example to http://hl7.org/fhir/ValueSet/medication-form-codes|5.0.0)

                    A coded concept defining the form of a medication.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Must Supportfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    76. Medication.totalVolume
                    Definition

                    When the specified product code does not infer a package size, this is the specific amount of drug in the product. For example, when specifying a product that has the same strength (For example, Insulin glargine 100 unit per mL solution for injection), this attribute provides additional clarification of the package amount (For example, 3 mL, 10mL, etc.).

                    ShortWhen the specified product code does not infer a package size, this is the specific amount of drug in the product
                    Control0..1
                    TypeQuantity
                    Is Modifierfalse
                    Must Supportfalse
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    78. Medication.ingredient
                    Definition

                    Identifies a particular constituent of interest in the product.

                    ShortActive or inactive ingredient
                    Comments

                    The ingredients need not be a complete list. If an ingredient is not specified, this does not indicate whether an ingredient is present or absent. If an ingredient is specified it does not mean that all ingredients are specified. It is possible to specify both inactive and active ingredients.

                    Control0..*
                    TypeBackboneElement
                    Is Modifierfalse
                    Must Supportfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    80. Medication.ingredient.id
                    Definition

                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                    ShortUnique id for inter-element referencing
                    Control0..1
                    This element is affected by the following invariants: ele-1
                    Typestring
                    Is Modifierfalse
                    XML FormatIn the XML format, this property is represented as an attribute.
                    Summaryfalse
                    82. Medication.ingredient.extension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                    ShortAdditional content defined by implementations
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifierfalse
                    Summaryfalse
                    Alternate Namesextensions, user content
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    84. Medication.ingredient.modifierExtension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                    ShortExtensions that cannot be ignored even if unrecognized
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                    Summarytrue
                    Requirements

                    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                    Alternate Namesextensions, user content, modifiers
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    86. Medication.ingredient.item
                    Definition

                    The ingredient (substance or medication) that the ingredient.strength relates to. This is represented as a concept from a code system or described in another resource (Substance or Medication).

                    ShortThe ingredient (substance or medication) that the ingredient.strength relates to
                    Control1..1
                    BindingFor example codes, see SNOMEDCTMedicationCodes
                    (example to http://hl7.org/fhir/ValueSet/medication-codes|5.0.0)
                    TypeCodeableReference(Substance, Medication)
                    Is Modifierfalse
                    Must Supportfalse
                    Summaryfalse
                    Requirements

                    The ingredient may reference a substance (for example, amoxicillin) or another medication (for example in the case of a compounded product, Glaxal Base).

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    88. Medication.ingredient.isActive
                    Definition

                    Indication of whether this ingredient affects the therapeutic action of the drug.

                    ShortActive ingredient indicator
                    Control0..1
                    Typeboolean
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Must Supportfalse
                    Summaryfalse
                    Requirements

                    True indicates that the ingredient affects the therapeutic action of the drug (i.e. active). False indicates that the ingredient does not affect the therapeutic action of the drug (i.e. inactive).

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    90. Medication.ingredient.strength[x]
                    Definition

                    Specifies how many (or how much) of the items there are in this Medication. For example, 250 mg per tablet. This is expressed as a ratio where the numerator is 250mg and the denominator is 1 tablet but can also be expressed a quantity when the denominator is assumed to be 1 tablet.

                    ShortQuantity of ingredient present
                    Control0..1
                    BindingThe codes SHOULD be taken from MedicationIngredientStrengthCodes
                    (preferred to http://hl7.org/fhir/ValueSet/medication-ingredientstrength|5.0.0)

                    A coded concpet defining the strength of an ingredient.

                    TypeChoice of: Ratio, CodeableConcept, Quantity
                    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                    Is Modifierfalse
                    Must Supportfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    92. Medication.batch
                    Definition

                    Information that only applies to packages (not products).

                    ShortDetails about packaged medications
                    Control0..1
                    TypeBackboneElement
                    Is Modifierfalse
                    Must Supportfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    94. Medication.batch.id
                    Definition

                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                    ShortUnique id for inter-element referencing
                    Control0..1
                    This element is affected by the following invariants: ele-1
                    Typestring
                    Is Modifierfalse
                    XML FormatIn the XML format, this property is represented as an attribute.
                    Summaryfalse
                    96. Medication.batch.extension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                    ShortAdditional content defined by implementations
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifierfalse
                    Summaryfalse
                    Alternate Namesextensions, user content
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    98. Medication.batch.modifierExtension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                    ShortExtensions that cannot be ignored even if unrecognized
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                    Summarytrue
                    Requirements

                    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                    Alternate Namesextensions, user content, modifiers
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    100. Medication.batch.lotNumber
                    Definition

                    The assigned lot number of a batch of the specified product.

                    ShortIdentifier assigned to batch
                    Control0..1
                    Typestring
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Must Supportfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    102. Medication.batch.expirationDate
                    Definition

                    When this specific batch of product will expire.

                    ShortWhen batch will expire
                    Control0..1
                    TypedateTime
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Must Supportfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    104. Medication.definition
                    Definition

                    A reference to a knowledge resource that provides more information about this medication.

                    ShortKnowledge about this medication
                    Control0..1
                    TypeReference(MedicationKnowledge)
                    Is Modifierfalse
                    Must Supportfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))