Extensions for Using Data Elements from FHIR DSTU2 in FHIR R5
0.1.0 - STU
Extensions for Using Data Elements from FHIR DSTU2 in FHIR R5
0.1.0 - STU
Extensions for Using Data Elements from FHIR DSTU2 in FHIR R5 - Downloaded Version null See the Directory of published versions
| Page standards status: Trial-use | Maturity Level: 0 |
Definitions for the ext-R2-MedicationDispense.dos.dose extension.
Guidance on how to interpret the contents of this table can be foundhere
| 0. Extension | |
| Definition | DSTU2: Optional Extension Element - found in all resources. |
| Short | DSTU2: Amount of medication per dose additional typesOptional Extensions Element |
| Comments | Element |
| Control | 0..1* |
| Is Modifier | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 2. Extension.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | http://hl7.org/fhir/1.0/StructureDefinition/extension-MedicationDispense.dosageInstruction.dose |
| 4. Extension.value[x] | |
| Definition | The amount of therapeutic or other substance given at one administration event. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Amount of medication per doseValue of extension |
| Comments | Note that this specifies the quantity of the specified medication, not the quantity of active ingredient(s). The prescribed strength can be calculated by multiplying the doseQuantity by the strength of each active ingredient in the prescribed Medication. If the administration is not intended to be instantaneous (rate is present or timing has a duration), this can be specified to convey the total amount to be administered over the period of time as indicated by the schedule. |
| Control | 0..1 This element is affected by the following invariants: ext-1 |
| Type | Choice of: Range, Quantity(SimpleQuantity), date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
Guidance on how to interpret the contents of this table can be foundhere
| 0. Extension | |
| Definition | DSTU2: |
| Short | DSTU2: Amount of medication per dose additional types |
| Comments | Element |
| Control | 0..1 |
| Is Modifier | false |
| 2. Extension.url | |
| Control | 1..1 |
| Fixed Value | http://hl7.org/fhir/1.0/StructureDefinition/extension-MedicationDispense.dosageInstruction.dose |
| 4. Extension.value[x] | |
| Definition | The amount of therapeutic or other substance given at one administration event. |
| Short | Amount of medication per dose |
| Comments | Note that this specifies the quantity of the specified medication, not the quantity of active ingredient(s). The prescribed strength can be calculated by multiplying the doseQuantity by the strength of each active ingredient in the prescribed Medication. If the administration is not intended to be instantaneous (rate is present or timing has a duration), this can be specified to convey the total amount to be administered over the period of time as indicated by the schedule. |
| Control | 0..1 |
| Type | Choice of: Range, Quantity(SimpleQuantity), date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Guidance on how to interpret the contents of this table can be foundhere
| 0. Extension | |
| Definition | DSTU2: |
| Short | DSTU2: Amount of medication per dose additional types |
| Comments | Element |
| Control | 0..1 |
| Is Modifier | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 2. Extension.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 This element is affected by the following invariants: ele-1 |
| Type | id |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 4. Extension.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 6. Extension.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | http://hl7.org/fhir/1.0/StructureDefinition/extension-MedicationDispense.dosageInstruction.dose |
| 8. Extension.value[x] | |
| Definition | The amount of therapeutic or other substance given at one administration event. |
| Short | Amount of medication per dose |
| Comments | Note that this specifies the quantity of the specified medication, not the quantity of active ingredient(s). The prescribed strength can be calculated by multiplying the doseQuantity by the strength of each active ingredient in the prescribed Medication. If the administration is not intended to be instantaneous (rate is present or timing has a duration), this can be specified to convey the total amount to be administered over the period of time as indicated by the schedule. |
| Control | 0..1 This element is affected by the following invariants: ext-1 |
| Type | Choice of: Range, Quantity(SimpleQuantity) |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
IG © 2025+ FHIR Infrastructure. Package hl7.fhir.uv.xver-r2.r5#0.1.0 based on FHIR 5.0.0. Generated 2026-03-20
Links: Table of Contents |
QA Report
| Version History |
|
Propose a change