ExtensionCarePlan_Activity_Detail - Definitions - Extensions for Using Data Elements from FHIR DSTU2 in FHIR R5 v0.1.0

Extensions for Using Data Elements from FHIR DSTU2 in FHIR R5 - Downloaded Version null See the Directory of published versions

Extension: ExtensionCarePlan_Activity_Detail - Detailed Descriptions

Page standards status: Trial-use

Maturity Level: 0

Definitions for the ext-R2-CarePlan.act.detail extension.

Key Elements Table
Differential Elements Table
Snapshot Elements Table

Guidance on how to interpret the contents of this table can be foundhere

0. Extension
Definition	DSTU2: `CarePlan.activity.detail` (new:BackboneElement) Optional Extension Element - found in all resources.
Short	DSTU2: In-line definition of activity (new)Optional Extensions Element
Comments	Element `CarePlan.activity.detail` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Control	0..1*
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
2. Extension.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	10..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing	This element introduces a set of slices on `Extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
4. Extension.extension:category
Slice Name	category
Definition	DSTU2: `CarePlan.activity.detail.category` (new:CodeableConcept)
Short	DSTU2: diet \| drug \| encounter \| observation \| procedure \| supply \| other (new)Additional content defined by implementations
Comments	Element `CarePlan.activity.detail.category` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.category` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.category` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Requirements	May determine what types of extensions are permitted. Element `CarePlan.activity.detail.category` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.category` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.category` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
6. Extension.extension:category.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`category`
8. Extension.extension:category.value[x]
Definition	High-level categorization of the type of activity in a care plan. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	diet \| drug \| encounter \| observation \| procedure \| supply \| otherValue of extension
Control	0..1 This element is affected by the following invariants: ext-1
Binding	For example codes, see For codes, see R2CarePlanActivityCategoryForR5 (0.1.0) (example to `http://hl7.org/fhir/uv/xver/ValueSet/R2-care-plan-activity-category-for-R5\|0.1.0`) High-level categorization of the type of activity in a care plan.
Type	CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. Extension.extension:code
Slice Name	code
Definition	DSTU2: `CarePlan.activity.detail.code` (new:CodeableConcept)
Short	DSTU2: Detail type of activity (new)Additional content defined by implementations
Comments	Element `CarePlan.activity.detail.code` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.code` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.code` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element). Tends to be less relevant for activities involving particular products. Codes should not convey negation - use "prohibited" instead.
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Allows matching performed to planned as well as validation against protocols. Element `CarePlan.activity.detail.code` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.code` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.code` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
12. Extension.extension:code.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`code`
14. Extension.extension:code.value[x]
Definition	Detailed description of the type of planned activity; e.g. What lab test, what procedure, what kind of encounter. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Detail type of activityValue of extension
Comments	Tends to be less relevant for activities involving particular products. Codes should not convey negation - use "prohibited" instead.
Control	0..1 This element is affected by the following invariants: ext-1
Type	CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
16. Extension.extension:reasonCode
Slice Name	reasonCode
Definition	DSTU2: `CarePlan.activity.detail.reasonCode` (new:CodeableConcept)
Short	DSTU2: Why activity should be done (new)Additional content defined by implementations
Comments	Element `CarePlan.activity.detail.reasonCode` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.reasonCode` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.reasonCode` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element). This could be a diagnosis code. If a full condition record exists or additional detail is needed, use reasonCondition instead.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `CarePlan.activity.detail.reasonCode` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.reasonCode` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.reasonCode` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
18. Extension.extension:reasonCode.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`reasonCode`
20. Extension.extension:reasonCode.value[x]
Definition	Provides the rationale that drove the inclusion of this particular activity as part of the plan. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Why activity should be doneValue of extension
Comments	This could be a diagnosis code. If a full condition record exists or additional detail is needed, use reasonCondition instead.
Control	0..1 This element is affected by the following invariants: ext-1
Type	CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
22. Extension.extension:reasonReference
Slice Name	reasonReference
Definition	DSTU2: `CarePlan.activity.detail.reasonReference` (new:Reference(Condition))
Short	DSTU2: Condition triggering need for activity (new)Additional content defined by implementations
Comments	Element `CarePlan.activity.detail.reasonReference` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.reasonReference` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.reasonReference` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element). Conditions can be identified at the activity level that are not identified as reasons for the overall plan.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `CarePlan.activity.detail.reasonReference` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.reasonReference` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.reasonReference` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
24. Extension.extension:reasonReference.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`reasonReference`
26. Extension.extension:reasonReference.value[x]
Definition	Provides the health condition(s) that drove the inclusion of this particular activity as part of the plan. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Condition triggering need for activityValue of extension
Comments	Conditions can be identified at the activity level that are not identified as reasons for the overall plan.
Control	0..1 This element is affected by the following invariants: ext-1
Type	Reference(Cross-version Profile for DSTU2.Condition for use in FHIR R5, Condition), date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
28. Extension.extension:goal
Slice Name	goal
Definition	DSTU2: `CarePlan.activity.detail.goal` (new:Reference(Goal))
Short	DSTU2: Goals this activity relates to (new)Additional content defined by implementations
Comments	Element `CarePlan.activity.detail.goal` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.goal` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.goal` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Requirements	So that participants know the link explicitly. Element `CarePlan.activity.detail.goal` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.goal` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.goal` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
30. Extension.extension:goal.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`goal`
32. Extension.extension:goal.value[x]
Definition	Internal reference that identifies the goals that this activity is intended to contribute towards meeting. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Goals this activity relates toValue of extension
Control	0..1 This element is affected by the following invariants: ext-1
Type	Reference(Cross-version Profile for DSTU2.Goal for use in FHIR R5, Goal), date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
34. Extension.extension:status
Slice Name	status
Definition	DSTU2: `CarePlan.activity.detail.status` (new:code)
Short	DSTU2: not-started \| scheduled \| in-progress \| on-hold \| completed \| cancelled (new)Additional content defined by implementations
Comments	Element `CarePlan.activity.detail.status` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.status` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.status` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element). Some aspects of status can be inferred based on the resources linked in actionTaken. Note that "status" is only as current as the plan was most recently updated.
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Indicates progress against the plan, whether the activity is still relevant for the plan. Element `CarePlan.activity.detail.status` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.status` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.status` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
36. Extension.extension:status.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`status`
38. Extension.extension:status.value[x]
Definition	Identifies what progress is being made for the specific activity. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	not-started \| scheduled \| in-progress \| on-hold \| completed \| cancelledValue of extension
Comments	Some aspects of status can be inferred based on the resources linked in actionTaken. Note that "status" is only as current as the plan was most recently updated.
Control	0..1 This element is affected by the following invariants: ext-1
Binding	The codes SHALL be taken from For codes, see R2CarePlanActivityStatusForR5 (0.1.0) (required to `http://hl7.org/fhir/uv/xver/ValueSet/R2-care-plan-activity-status-for-R5\|0.1.0`) Indicates where the activity is at in its overall life cycle.
Type	code, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
40. Extension.extension:statusReason
Slice Name	statusReason
Definition	DSTU2: `CarePlan.activity.detail.statusReason` (new:CodeableConcept)
Short	DSTU2: Reason for current status (new)Additional content defined by implementations
Comments	Element `CarePlan.activity.detail.statusReason` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.statusReason` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.statusReason` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element). Will generally not be present if status is "complete". Be sure to prompt to update this (or at least remove the existing value) if the status is changed.
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `CarePlan.activity.detail.statusReason` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.statusReason` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.statusReason` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
42. Extension.extension:statusReason.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`statusReason`
44. Extension.extension:statusReason.value[x]
Definition	Provides reason why the activity isn't yet started, is on hold, was cancelled, etc. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Reason for current statusValue of extension
Comments	Will generally not be present if status is "complete". Be sure to prompt to update this (or at least remove the existing value) if the status is changed.
Control	0..1 This element is affected by the following invariants: ext-1
Binding	For example codes, see For codes, see R2GoalStatusReasonForR5 (0.1.0) (example to `http://hl7.org/fhir/uv/xver/ValueSet/R2-goal-status-reason-for-R5\|0.1.0`) Describes why the current activity has the status it does; e.g. "Recovering from injury" as a reason for non-started or on-hold, "Patient does not enjoy activity" as a reason for cancelling a planned activity.
Type	CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
46. Extension.extension:prohibited
Slice Name	prohibited
Definition	DSTU2: `CarePlan.activity.detail.prohibited` (new:boolean)
Short	DSTU2: Do NOT do (new)Additional content defined by implementations
Comments	Element `CarePlan.activity.detail.prohibited` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.prohibited` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.prohibited` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Control	10..1*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Captures intention to not do something that may have been previously typical. Element `CarePlan.activity.detail.prohibited` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.prohibited` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.prohibited` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
48. Extension.extension:prohibited.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`prohibited`
50. Extension.extension:prohibited.value[x]
Definition	If true, indicates that the described activity is one that must NOT be engaged in when following the plan. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Do NOT doValue of extension
Control	10..1 This element is affected by the following invariants: ext-1
Type	boolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, CodeableReference, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
52. Extension.extension:scheduled
Slice Name	scheduled
Definition	DSTU2: `CarePlan.activity.detail.scheduled[x]` (new:Period, string, Timing)
Short	DSTU2: When activity is to occur (new)Additional content defined by implementations
Comments	Element `CarePlan.activity.detail.scheduled[x]` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.scheduled[x]` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.scheduled[x]` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Allows prompting for activities and detection of missed planned activities. Element `CarePlan.activity.detail.scheduled[x]` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.scheduled[x]` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.scheduled[x]` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
54. Extension.extension:scheduled.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`scheduled`
56. Extension.extension:scheduled.value[x]
Definition	The period, timing or frequency upon which the described activity is to occur. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	When activity is to occurValue of extension
Control	0..1 This element is affected by the following invariants: ext-1
Type	Choice of: Timing, Period, string, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
58. Extension.extension:location
Slice Name	location
Definition	DSTU2: `CarePlan.activity.detail.location` (new:Reference(Location))
Short	DSTU2: Where it should happen (new)Additional content defined by implementations
Comments	Element `CarePlan.activity.detail.location` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.location` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.location` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element). May reference a specific clinical location or may identify a type of location.
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Helps in planning of activity. Element `CarePlan.activity.detail.location` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.location` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.location` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
60. Extension.extension:location.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`location`
62. Extension.extension:location.value[x]
Definition	Identifies the facility where the activity will occur; e.g. home, hospital, specific clinic, etc. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Where it should happenValue of extension
Comments	May reference a specific clinical location or may identify a type of location.
Control	0..1 This element is affected by the following invariants: ext-1
Type	Reference(Cross-version Profile for DSTU2.Location for use in FHIR R5, Location), date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
64. Extension.extension:performer
Slice Name	performer
Definition	DSTU2: `CarePlan.activity.detail.performer` (new:Reference(Practitioner,Organization,RelatedPerson,Patient))
Short	DSTU2: Who will be responsible? (new)Additional content defined by implementations
Comments	Element `CarePlan.activity.detail.performer` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.performer` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.performer` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element). A performer MAY also be a participant in the care plan.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Helps in planning of activity. Element `CarePlan.activity.detail.performer` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.performer` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.performer` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
66. Extension.extension:performer.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`performer`
68. Extension.extension:performer.value[x]
Definition	Identifies who's expected to be involved in the activity. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Who will be responsible?Value of extension
Comments	A performer MAY also be a participant in the care plan.
Control	0..1 This element is affected by the following invariants: ext-1
Type	Reference(Cross-version Profile for DSTU2.Practitioner for use in FHIR R5, PractitionerRole, Cross-version Profile for DSTU2.Organization for use in FHIR R5, Organization, Cross-version Profile for DSTU2.RelatedPerson for use in FHIR R5, RelatedPerson, Cross-version Profile for DSTU2.Patient for use in FHIR R5, Patient), date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
70. Extension.extension:product
Slice Name	product
Definition	DSTU2: `CarePlan.activity.detail.product[x]` (new:CodeableConcept, Reference(Medication,Substance))
Short	DSTU2: What is to be administered/supplied (new)Additional content defined by implementations
Comments	Element `CarePlan.activity.detail.product[x]` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.product[x]` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.product[x]` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `CarePlan.activity.detail.product[x]` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.product[x]` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.product[x]` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
72. Extension.extension:product.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`product`
74. Extension.extension:product.value[x]
Definition	Identifies the food, drug or other product to be consumed or supplied in the activity. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	What is to be administered/suppliedValue of extension
Control	0..1 This element is affected by the following invariants: ext-1
Type	Choice of: CodeableConcept, Reference(Cross-version Profile for DSTU2.Medication for use in FHIR R5, Medication, Cross-version Profile for DSTU2.Substance for use in FHIR R5, Substance), date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
76. Extension.extension:dailyAmount
Slice Name	dailyAmount
Definition	DSTU2: `CarePlan.activity.detail.dailyAmount` (new:Quantity[SimpleQuantity])
Short	DSTU2: How to consume/day? (new)Additional content defined by implementations
Comments	Element `CarePlan.activity.detail.dailyAmount` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.dailyAmount` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.dailyAmount` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Allows rough dose checking. Element `CarePlan.activity.detail.dailyAmount` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.dailyAmount` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.dailyAmount` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
78. Extension.extension:dailyAmount.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`dailyAmount`
80. Extension.extension:dailyAmount.value[x]
Definition	Identifies the quantity expected to be consumed in a given day. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	How to consume/day?Value of extension
Control	0..1 This element is affected by the following invariants: ext-1
Type	Quantity(SimpleQuantity), date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
82. Extension.extension:quantity
Slice Name	quantity
Definition	DSTU2: `CarePlan.activity.detail.quantity` (new:Quantity[SimpleQuantity])
Short	DSTU2: How much to administer/supply/consume (new)Additional content defined by implementations
Comments	Element `CarePlan.activity.detail.quantity` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.quantity` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.quantity` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `CarePlan.activity.detail.quantity` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.quantity` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.quantity` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
84. Extension.extension:quantity.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`quantity`
86. Extension.extension:quantity.value[x]
Definition	Identifies the quantity expected to be supplied, administered or consumed by the subject. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	How much to administer/supply/consumeValue of extension
Control	0..1 This element is affected by the following invariants: ext-1
Type	Quantity(SimpleQuantity), date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
88. Extension.extension:description
Slice Name	description
Definition	DSTU2: `CarePlan.activity.detail.description` (new:string)
Short	DSTU2: Extra info describing activity to perform (new)Additional content defined by implementations
Comments	Element `CarePlan.activity.detail.description` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.description` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.description` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `CarePlan.activity.detail.description` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.description` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.description` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
90. Extension.extension:description.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`description`
92. Extension.extension:description.value[x]
Definition	This provides a textual description of constraints on the intended activity occurrence, including relation to other activities. It may also include objectives, pre-conditions and end-conditions. Finally, it may convey specifics about the activity such as body site, method, route, etc. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Extra info describing activity to performValue of extension
Control	0..1 This element is affected by the following invariants: ext-1
Type	string, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
94. Extension.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`http://hl7.org/fhir/1.0/StructureDefinition/extension-CarePlan.activity.detail`
96. Extension.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..01 This element is affected by the following invariants: ext-1
Type	Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be foundhere

0. Extension
Definition	DSTU2: `CarePlan.activity.detail` (new:BackboneElement)
Short	DSTU2: In-line definition of activity (new)
Comments	Element `CarePlan.activity.detail` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Control	0..1
Is Modifier	false
2. Extension.extension
Control	1..*
Slicing	This element introduces a set of slices on `Extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
4. Extension.extension:category
Slice Name	category
Definition	DSTU2: `CarePlan.activity.detail.category` (new:CodeableConcept)
Short	DSTU2: diet \| drug \| encounter \| observation \| procedure \| supply \| other (new)
Comments	Element `CarePlan.activity.detail.category` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.category` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.category` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Control	0..1
Requirements	May determine what types of extensions are permitted. Element `CarePlan.activity.detail.category` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.category` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.category` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
6. Extension.extension:category.url
Control	1..1
Fixed Value	`category`
8. Extension.extension:category.value[x]
Definition	High-level categorization of the type of activity in a care plan.
Short	diet \| drug \| encounter \| observation \| procedure \| supply \| other
Control	0..1
Binding	For example codes, see R2CarePlanActivityCategoryForR5 (0.1.0) (example to `http://hl7.org/fhir/uv/xver/ValueSet/R2-care-plan-activity-category-for-R5\|0.1.0`) High-level categorization of the type of activity in a care plan.
Type	CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
10. Extension.extension:code
Slice Name	code
Definition	DSTU2: `CarePlan.activity.detail.code` (new:CodeableConcept)
Short	DSTU2: Detail type of activity (new)
Comments	Element `CarePlan.activity.detail.code` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.code` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.code` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element). Tends to be less relevant for activities involving particular products. Codes should not convey negation - use "prohibited" instead.
Control	0..1
Requirements	Allows matching performed to planned as well as validation against protocols. Element `CarePlan.activity.detail.code` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.code` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.code` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
12. Extension.extension:code.url
Control	1..1
Fixed Value	`code`
14. Extension.extension:code.value[x]
Definition	Detailed description of the type of planned activity; e.g. What lab test, what procedure, what kind of encounter.
Short	Detail type of activity
Comments	Tends to be less relevant for activities involving particular products. Codes should not convey negation - use "prohibited" instead.
Control	0..1
Type	CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
16. Extension.extension:reasonCode
Slice Name	reasonCode
Definition	DSTU2: `CarePlan.activity.detail.reasonCode` (new:CodeableConcept)
Short	DSTU2: Why activity should be done (new)
Comments	Element `CarePlan.activity.detail.reasonCode` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.reasonCode` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.reasonCode` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element). This could be a diagnosis code. If a full condition record exists or additional detail is needed, use reasonCondition instead.
Control	0..*
Requirements	Element `CarePlan.activity.detail.reasonCode` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.reasonCode` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.reasonCode` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
18. Extension.extension:reasonCode.url
Control	1..1
Fixed Value	`reasonCode`
20. Extension.extension:reasonCode.value[x]
Definition	Provides the rationale that drove the inclusion of this particular activity as part of the plan.
Short	Why activity should be done
Comments	This could be a diagnosis code. If a full condition record exists or additional detail is needed, use reasonCondition instead.
Control	0..1
Type	CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
22. Extension.extension:reasonReference
Slice Name	reasonReference
Definition	DSTU2: `CarePlan.activity.detail.reasonReference` (new:Reference(Condition))
Short	DSTU2: Condition triggering need for activity (new)
Comments	Element `CarePlan.activity.detail.reasonReference` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.reasonReference` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.reasonReference` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element). Conditions can be identified at the activity level that are not identified as reasons for the overall plan.
Control	0..*
Requirements	Element `CarePlan.activity.detail.reasonReference` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.reasonReference` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.reasonReference` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
24. Extension.extension:reasonReference.url
Control	1..1
Fixed Value	`reasonReference`
26. Extension.extension:reasonReference.value[x]
Definition	Provides the health condition(s) that drove the inclusion of this particular activity as part of the plan.
Short	Condition triggering need for activity
Comments	Conditions can be identified at the activity level that are not identified as reasons for the overall plan.
Control	0..1
Type	Reference(Cross-version Profile for DSTU2.Condition for use in FHIR R5, Condition)
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
28. Extension.extension:goal
Slice Name	goal
Definition	DSTU2: `CarePlan.activity.detail.goal` (new:Reference(Goal))
Short	DSTU2: Goals this activity relates to (new)
Comments	Element `CarePlan.activity.detail.goal` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.goal` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.goal` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Control	0..*
Requirements	So that participants know the link explicitly. Element `CarePlan.activity.detail.goal` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.goal` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.goal` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
30. Extension.extension:goal.url
Control	1..1
Fixed Value	`goal`
32. Extension.extension:goal.value[x]
Definition	Internal reference that identifies the goals that this activity is intended to contribute towards meeting.
Short	Goals this activity relates to
Control	0..1
Type	Reference(Cross-version Profile for DSTU2.Goal for use in FHIR R5, Goal)
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
34. Extension.extension:status
Slice Name	status
Definition	DSTU2: `CarePlan.activity.detail.status` (new:code)
Short	DSTU2: not-started \| scheduled \| in-progress \| on-hold \| completed \| cancelled (new)
Comments	Element `CarePlan.activity.detail.status` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.status` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.status` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element). Some aspects of status can be inferred based on the resources linked in actionTaken. Note that "status" is only as current as the plan was most recently updated.
Control	0..1
Requirements	Indicates progress against the plan, whether the activity is still relevant for the plan. Element `CarePlan.activity.detail.status` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.status` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.status` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
36. Extension.extension:status.url
Control	1..1
Fixed Value	`status`
38. Extension.extension:status.value[x]
Definition	Identifies what progress is being made for the specific activity.
Short	not-started \| scheduled \| in-progress \| on-hold \| completed \| cancelled
Comments	Some aspects of status can be inferred based on the resources linked in actionTaken. Note that "status" is only as current as the plan was most recently updated.
Control	0..1
Binding	The codes SHALL be taken from R2CarePlanActivityStatusForR5 (0.1.0) (required to `http://hl7.org/fhir/uv/xver/ValueSet/R2-care-plan-activity-status-for-R5\|0.1.0`) Indicates where the activity is at in its overall life cycle.
Type	code
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
40. Extension.extension:statusReason
Slice Name	statusReason
Definition	DSTU2: `CarePlan.activity.detail.statusReason` (new:CodeableConcept)
Short	DSTU2: Reason for current status (new)
Comments	Element `CarePlan.activity.detail.statusReason` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.statusReason` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.statusReason` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element). Will generally not be present if status is "complete". Be sure to prompt to update this (or at least remove the existing value) if the status is changed.
Control	0..1
Requirements	Element `CarePlan.activity.detail.statusReason` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.statusReason` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.statusReason` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
42. Extension.extension:statusReason.url
Control	1..1
Fixed Value	`statusReason`
44. Extension.extension:statusReason.value[x]
Definition	Provides reason why the activity isn't yet started, is on hold, was cancelled, etc.
Short	Reason for current status
Comments	Will generally not be present if status is "complete". Be sure to prompt to update this (or at least remove the existing value) if the status is changed.
Control	0..1
Binding	For example codes, see R2GoalStatusReasonForR5 (0.1.0) (example to `http://hl7.org/fhir/uv/xver/ValueSet/R2-goal-status-reason-for-R5\|0.1.0`) Describes why the current activity has the status it does; e.g. "Recovering from injury" as a reason for non-started or on-hold, "Patient does not enjoy activity" as a reason for cancelling a planned activity.
Type	CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
46. Extension.extension:prohibited
Slice Name	prohibited
Definition	DSTU2: `CarePlan.activity.detail.prohibited` (new:boolean)
Short	DSTU2: Do NOT do (new)
Comments	Element `CarePlan.activity.detail.prohibited` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.prohibited` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.prohibited` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Control	1..1
Requirements	Captures intention to not do something that may have been previously typical. Element `CarePlan.activity.detail.prohibited` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.prohibited` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.prohibited` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
48. Extension.extension:prohibited.url
Control	1..1
Fixed Value	`prohibited`
50. Extension.extension:prohibited.value[x]
Definition	If true, indicates that the described activity is one that must NOT be engaged in when following the plan.
Short	Do NOT do
Control	1..1
Type	boolean
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
52. Extension.extension:scheduled
Slice Name	scheduled
Definition	DSTU2: `CarePlan.activity.detail.scheduled[x]` (new:Period, string, Timing)
Short	DSTU2: When activity is to occur (new)
Comments	Element `CarePlan.activity.detail.scheduled[x]` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.scheduled[x]` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.scheduled[x]` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Control	0..1
Requirements	Allows prompting for activities and detection of missed planned activities. Element `CarePlan.activity.detail.scheduled[x]` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.scheduled[x]` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.scheduled[x]` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
54. Extension.extension:scheduled.url
Control	1..1
Fixed Value	`scheduled`
56. Extension.extension:scheduled.value[x]
Definition	The period, timing or frequency upon which the described activity is to occur.
Short	When activity is to occur
Control	0..1
Type	Choice of: Timing, Period, string
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
58. Extension.extension:location
Slice Name	location
Definition	DSTU2: `CarePlan.activity.detail.location` (new:Reference(Location))
Short	DSTU2: Where it should happen (new)
Comments	Element `CarePlan.activity.detail.location` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.location` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.location` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element). May reference a specific clinical location or may identify a type of location.
Control	0..1
Requirements	Helps in planning of activity. Element `CarePlan.activity.detail.location` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.location` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.location` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
60. Extension.extension:location.url
Control	1..1
Fixed Value	`location`
62. Extension.extension:location.value[x]
Definition	Identifies the facility where the activity will occur; e.g. home, hospital, specific clinic, etc.
Short	Where it should happen
Comments	May reference a specific clinical location or may identify a type of location.
Control	0..1
Type	Reference(Cross-version Profile for DSTU2.Location for use in FHIR R5, Location)
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
64. Extension.extension:performer
Slice Name	performer
Definition	DSTU2: `CarePlan.activity.detail.performer` (new:Reference(Practitioner,Organization,RelatedPerson,Patient))
Short	DSTU2: Who will be responsible? (new)
Comments	Element `CarePlan.activity.detail.performer` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.performer` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.performer` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element). A performer MAY also be a participant in the care plan.
Control	0..*
Requirements	Helps in planning of activity. Element `CarePlan.activity.detail.performer` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.performer` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.performer` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
66. Extension.extension:performer.url
Control	1..1
Fixed Value	`performer`
68. Extension.extension:performer.value[x]
Definition	Identifies who's expected to be involved in the activity.
Short	Who will be responsible?
Comments	A performer MAY also be a participant in the care plan.
Control	0..1
Type	Reference(Cross-version Profile for DSTU2.Practitioner for use in FHIR R5, PractitionerRole, Cross-version Profile for DSTU2.Organization for use in FHIR R5, Organization, Cross-version Profile for DSTU2.RelatedPerson for use in FHIR R5, RelatedPerson, Cross-version Profile for DSTU2.Patient for use in FHIR R5, Patient)
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
70. Extension.extension:product
Slice Name	product
Definition	DSTU2: `CarePlan.activity.detail.product[x]` (new:CodeableConcept, Reference(Medication,Substance))
Short	DSTU2: What is to be administered/supplied (new)
Comments	Element `CarePlan.activity.detail.product[x]` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.product[x]` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.product[x]` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Control	0..1
Requirements	Element `CarePlan.activity.detail.product[x]` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.product[x]` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.product[x]` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
72. Extension.extension:product.url
Control	1..1
Fixed Value	`product`
74. Extension.extension:product.value[x]
Definition	Identifies the food, drug or other product to be consumed or supplied in the activity.
Short	What is to be administered/supplied
Control	0..1
Type	Choice of: CodeableConcept, Reference(Cross-version Profile for DSTU2.Medication for use in FHIR R5, Medication, Cross-version Profile for DSTU2.Substance for use in FHIR R5, Substance)
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
76. Extension.extension:dailyAmount
Slice Name	dailyAmount
Definition	DSTU2: `CarePlan.activity.detail.dailyAmount` (new:Quantity[SimpleQuantity])
Short	DSTU2: How to consume/day? (new)
Comments	Element `CarePlan.activity.detail.dailyAmount` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.dailyAmount` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.dailyAmount` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Control	0..1
Requirements	Allows rough dose checking. Element `CarePlan.activity.detail.dailyAmount` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.dailyAmount` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.dailyAmount` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
78. Extension.extension:dailyAmount.url
Control	1..1
Fixed Value	`dailyAmount`
80. Extension.extension:dailyAmount.value[x]
Definition	Identifies the quantity expected to be consumed in a given day.
Short	How to consume/day?
Control	0..1
Type	Quantity(SimpleQuantity)
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
82. Extension.extension:quantity
Slice Name	quantity
Definition	DSTU2: `CarePlan.activity.detail.quantity` (new:Quantity[SimpleQuantity])
Short	DSTU2: How much to administer/supply/consume (new)
Comments	Element `CarePlan.activity.detail.quantity` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.quantity` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.quantity` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Control	0..1
Requirements	Element `CarePlan.activity.detail.quantity` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.quantity` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.quantity` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
84. Extension.extension:quantity.url
Control	1..1
Fixed Value	`quantity`
86. Extension.extension:quantity.value[x]
Definition	Identifies the quantity expected to be supplied, administered or consumed by the subject.
Short	How much to administer/supply/consume
Control	0..1
Type	Quantity(SimpleQuantity)
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
88. Extension.extension:description
Slice Name	description
Definition	DSTU2: `CarePlan.activity.detail.description` (new:string)
Short	DSTU2: Extra info describing activity to perform (new)
Comments	Element `CarePlan.activity.detail.description` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.description` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.description` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Control	0..1
Requirements	Element `CarePlan.activity.detail.description` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.description` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.description` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
90. Extension.extension:description.url
Control	1..1
Fixed Value	`description`
92. Extension.extension:description.value[x]
Definition	This provides a textual description of constraints on the intended activity occurrence, including relation to other activities. It may also include objectives, pre-conditions and end-conditions. Finally, it may convey specifics about the activity such as body site, method, route, etc.
Short	Extra info describing activity to perform
Control	0..1
Type	string
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
94. Extension.url
Control	1..1
Fixed Value	`http://hl7.org/fhir/1.0/StructureDefinition/extension-CarePlan.activity.detail`
96. Extension.value[x]
Control	0..0

Guidance on how to interpret the contents of this table can be foundhere

0. Extension
Definition	DSTU2: `CarePlan.activity.detail` (new:BackboneElement)
Short	DSTU2: In-line definition of activity (new)
Comments	Element `CarePlan.activity.detail` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Control	0..1
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
2. Extension.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
4. Extension.extension
Definition	An Extension
Short	Extension
Control	1..*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
6. Extension.extension:category
Slice Name	category
Definition	DSTU2: `CarePlan.activity.detail.category` (new:CodeableConcept)
Short	DSTU2: diet \| drug \| encounter \| observation \| procedure \| supply \| other (new)
Comments	Element `CarePlan.activity.detail.category` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.category` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.category` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Requirements	May determine what types of extensions are permitted. Element `CarePlan.activity.detail.category` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.category` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.category` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
8. Extension.extension:category.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
10. Extension.extension:category.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
12. Extension.extension:category.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`category`
14. Extension.extension:category.value[x]
Definition	High-level categorization of the type of activity in a care plan.
Short	diet \| drug \| encounter \| observation \| procedure \| supply \| other
Control	0..1 This element is affected by the following invariants: ext-1
Binding	For example codes, see R2CarePlanActivityCategoryForR5 (0.1.0) (example to `http://hl7.org/fhir/uv/xver/ValueSet/R2-care-plan-activity-category-for-R5\|0.1.0`) High-level categorization of the type of activity in a care plan.
Type	CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
16. Extension.extension:code
Slice Name	code
Definition	DSTU2: `CarePlan.activity.detail.code` (new:CodeableConcept)
Short	DSTU2: Detail type of activity (new)
Comments	Element `CarePlan.activity.detail.code` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.code` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.code` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element). Tends to be less relevant for activities involving particular products. Codes should not convey negation - use "prohibited" instead.
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Requirements	Allows matching performed to planned as well as validation against protocols. Element `CarePlan.activity.detail.code` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.code` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.code` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
18. Extension.extension:code.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
20. Extension.extension:code.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
22. Extension.extension:code.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`code`
24. Extension.extension:code.value[x]
Definition	Detailed description of the type of planned activity; e.g. What lab test, what procedure, what kind of encounter.
Short	Detail type of activity
Comments	Tends to be less relevant for activities involving particular products. Codes should not convey negation - use "prohibited" instead.
Control	0..1 This element is affected by the following invariants: ext-1
Type	CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
26. Extension.extension:reasonCode
Slice Name	reasonCode
Definition	DSTU2: `CarePlan.activity.detail.reasonCode` (new:CodeableConcept)
Short	DSTU2: Why activity should be done (new)
Comments	Element `CarePlan.activity.detail.reasonCode` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.reasonCode` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.reasonCode` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element). This could be a diagnosis code. If a full condition record exists or additional detail is needed, use reasonCondition instead.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `CarePlan.activity.detail.reasonCode` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.reasonCode` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.reasonCode` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
28. Extension.extension:reasonCode.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
30. Extension.extension:reasonCode.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
32. Extension.extension:reasonCode.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`reasonCode`
34. Extension.extension:reasonCode.value[x]
Definition	Provides the rationale that drove the inclusion of this particular activity as part of the plan.
Short	Why activity should be done
Comments	This could be a diagnosis code. If a full condition record exists or additional detail is needed, use reasonCondition instead.
Control	0..1 This element is affected by the following invariants: ext-1
Type	CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
36. Extension.extension:reasonReference
Slice Name	reasonReference
Definition	DSTU2: `CarePlan.activity.detail.reasonReference` (new:Reference(Condition))
Short	DSTU2: Condition triggering need for activity (new)
Comments	Element `CarePlan.activity.detail.reasonReference` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.reasonReference` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.reasonReference` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element). Conditions can be identified at the activity level that are not identified as reasons for the overall plan.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `CarePlan.activity.detail.reasonReference` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.reasonReference` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.reasonReference` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
38. Extension.extension:reasonReference.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
40. Extension.extension:reasonReference.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
42. Extension.extension:reasonReference.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`reasonReference`
44. Extension.extension:reasonReference.value[x]
Definition	Provides the health condition(s) that drove the inclusion of this particular activity as part of the plan.
Short	Condition triggering need for activity
Comments	Conditions can be identified at the activity level that are not identified as reasons for the overall plan.
Control	0..1 This element is affected by the following invariants: ext-1
Type	Reference(Cross-version Profile for DSTU2.Condition for use in FHIR R5, Condition)
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
46. Extension.extension:goal
Slice Name	goal
Definition	DSTU2: `CarePlan.activity.detail.goal` (new:Reference(Goal))
Short	DSTU2: Goals this activity relates to (new)
Comments	Element `CarePlan.activity.detail.goal` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.goal` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.goal` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Requirements	So that participants know the link explicitly. Element `CarePlan.activity.detail.goal` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.goal` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.goal` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
48. Extension.extension:goal.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
50. Extension.extension:goal.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
52. Extension.extension:goal.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`goal`
54. Extension.extension:goal.value[x]
Definition	Internal reference that identifies the goals that this activity is intended to contribute towards meeting.
Short	Goals this activity relates to
Control	0..1 This element is affected by the following invariants: ext-1
Type	Reference(Cross-version Profile for DSTU2.Goal for use in FHIR R5, Goal)
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
56. Extension.extension:status
Slice Name	status
Definition	DSTU2: `CarePlan.activity.detail.status` (new:code)
Short	DSTU2: not-started \| scheduled \| in-progress \| on-hold \| completed \| cancelled (new)
Comments	Element `CarePlan.activity.detail.status` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.status` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.status` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element). Some aspects of status can be inferred based on the resources linked in actionTaken. Note that "status" is only as current as the plan was most recently updated.
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Requirements	Indicates progress against the plan, whether the activity is still relevant for the plan. Element `CarePlan.activity.detail.status` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.status` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.status` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
58. Extension.extension:status.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
60. Extension.extension:status.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
62. Extension.extension:status.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`status`
64. Extension.extension:status.value[x]
Definition	Identifies what progress is being made for the specific activity.
Short	not-started \| scheduled \| in-progress \| on-hold \| completed \| cancelled
Comments	Some aspects of status can be inferred based on the resources linked in actionTaken. Note that "status" is only as current as the plan was most recently updated.
Control	0..1 This element is affected by the following invariants: ext-1
Binding	The codes SHALL be taken from R2CarePlanActivityStatusForR5 (0.1.0) (required to `http://hl7.org/fhir/uv/xver/ValueSet/R2-care-plan-activity-status-for-R5\|0.1.0`) Indicates where the activity is at in its overall life cycle.
Type	code
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
66. Extension.extension:statusReason
Slice Name	statusReason
Definition	DSTU2: `CarePlan.activity.detail.statusReason` (new:CodeableConcept)
Short	DSTU2: Reason for current status (new)
Comments	Element `CarePlan.activity.detail.statusReason` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.statusReason` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.statusReason` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element). Will generally not be present if status is "complete". Be sure to prompt to update this (or at least remove the existing value) if the status is changed.
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `CarePlan.activity.detail.statusReason` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.statusReason` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.statusReason` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
68. Extension.extension:statusReason.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
70. Extension.extension:statusReason.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
72. Extension.extension:statusReason.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`statusReason`
74. Extension.extension:statusReason.value[x]
Definition	Provides reason why the activity isn't yet started, is on hold, was cancelled, etc.
Short	Reason for current status
Comments	Will generally not be present if status is "complete". Be sure to prompt to update this (or at least remove the existing value) if the status is changed.
Control	0..1 This element is affected by the following invariants: ext-1
Binding	For example codes, see R2GoalStatusReasonForR5 (0.1.0) (example to `http://hl7.org/fhir/uv/xver/ValueSet/R2-goal-status-reason-for-R5\|0.1.0`) Describes why the current activity has the status it does; e.g. "Recovering from injury" as a reason for non-started or on-hold, "Patient does not enjoy activity" as a reason for cancelling a planned activity.
Type	CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
76. Extension.extension:prohibited
Slice Name	prohibited
Definition	DSTU2: `CarePlan.activity.detail.prohibited` (new:boolean)
Short	DSTU2: Do NOT do (new)
Comments	Element `CarePlan.activity.detail.prohibited` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.prohibited` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.prohibited` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Control	1..1
Type	Extension
Is Modifier	false
Summary	false
Requirements	Captures intention to not do something that may have been previously typical. Element `CarePlan.activity.detail.prohibited` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.prohibited` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.prohibited` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
78. Extension.extension:prohibited.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
80. Extension.extension:prohibited.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
82. Extension.extension:prohibited.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`prohibited`
84. Extension.extension:prohibited.value[x]
Definition	If true, indicates that the described activity is one that must NOT be engaged in when following the plan.
Short	Do NOT do
Control	1..1 This element is affected by the following invariants: ext-1
Type	boolean
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
86. Extension.extension:scheduled
Slice Name	scheduled
Definition	DSTU2: `CarePlan.activity.detail.scheduled[x]` (new:Period, string, Timing)
Short	DSTU2: When activity is to occur (new)
Comments	Element `CarePlan.activity.detail.scheduled[x]` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.scheduled[x]` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.scheduled[x]` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Requirements	Allows prompting for activities and detection of missed planned activities. Element `CarePlan.activity.detail.scheduled[x]` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.scheduled[x]` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.scheduled[x]` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
88. Extension.extension:scheduled.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
90. Extension.extension:scheduled.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
92. Extension.extension:scheduled.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`scheduled`
94. Extension.extension:scheduled.value[x]
Definition	The period, timing or frequency upon which the described activity is to occur.
Short	When activity is to occur
Control	0..1 This element is affected by the following invariants: ext-1
Type	Choice of: Timing, Period, string
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
96. Extension.extension:location
Slice Name	location
Definition	DSTU2: `CarePlan.activity.detail.location` (new:Reference(Location))
Short	DSTU2: Where it should happen (new)
Comments	Element `CarePlan.activity.detail.location` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.location` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.location` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element). May reference a specific clinical location or may identify a type of location.
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Requirements	Helps in planning of activity. Element `CarePlan.activity.detail.location` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.location` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.location` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
98. Extension.extension:location.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
100. Extension.extension:location.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
102. Extension.extension:location.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`location`
104. Extension.extension:location.value[x]
Definition	Identifies the facility where the activity will occur; e.g. home, hospital, specific clinic, etc.
Short	Where it should happen
Comments	May reference a specific clinical location or may identify a type of location.
Control	0..1 This element is affected by the following invariants: ext-1
Type	Reference(Cross-version Profile for DSTU2.Location for use in FHIR R5, Location)
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
106. Extension.extension:performer
Slice Name	performer
Definition	DSTU2: `CarePlan.activity.detail.performer` (new:Reference(Practitioner,Organization,RelatedPerson,Patient))
Short	DSTU2: Who will be responsible? (new)
Comments	Element `CarePlan.activity.detail.performer` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.performer` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.performer` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element). A performer MAY also be a participant in the care plan.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Helps in planning of activity. Element `CarePlan.activity.detail.performer` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.performer` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.performer` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
108. Extension.extension:performer.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
110. Extension.extension:performer.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
112. Extension.extension:performer.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`performer`
114. Extension.extension:performer.value[x]
Definition	Identifies who's expected to be involved in the activity.
Short	Who will be responsible?
Comments	A performer MAY also be a participant in the care plan.
Control	0..1 This element is affected by the following invariants: ext-1
Type	Reference(Cross-version Profile for DSTU2.Practitioner for use in FHIR R5, PractitionerRole, Cross-version Profile for DSTU2.Organization for use in FHIR R5, Organization, Cross-version Profile for DSTU2.RelatedPerson for use in FHIR R5, RelatedPerson, Cross-version Profile for DSTU2.Patient for use in FHIR R5, Patient)
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
116. Extension.extension:product
Slice Name	product
Definition	DSTU2: `CarePlan.activity.detail.product[x]` (new:CodeableConcept, Reference(Medication,Substance))
Short	DSTU2: What is to be administered/supplied (new)
Comments	Element `CarePlan.activity.detail.product[x]` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.product[x]` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.product[x]` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `CarePlan.activity.detail.product[x]` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.product[x]` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.product[x]` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
118. Extension.extension:product.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
120. Extension.extension:product.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
122. Extension.extension:product.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`product`
124. Extension.extension:product.value[x]
Definition	Identifies the food, drug or other product to be consumed or supplied in the activity.
Short	What is to be administered/supplied
Control	0..1 This element is affected by the following invariants: ext-1
Type	Choice of: CodeableConcept, Reference(Cross-version Profile for DSTU2.Medication for use in FHIR R5, Medication, Cross-version Profile for DSTU2.Substance for use in FHIR R5, Substance)
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
126. Extension.extension:dailyAmount
Slice Name	dailyAmount
Definition	DSTU2: `CarePlan.activity.detail.dailyAmount` (new:Quantity[SimpleQuantity])
Short	DSTU2: How to consume/day? (new)
Comments	Element `CarePlan.activity.detail.dailyAmount` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.dailyAmount` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.dailyAmount` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Requirements	Allows rough dose checking. Element `CarePlan.activity.detail.dailyAmount` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.dailyAmount` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.dailyAmount` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
128. Extension.extension:dailyAmount.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
130. Extension.extension:dailyAmount.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
132. Extension.extension:dailyAmount.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`dailyAmount`
134. Extension.extension:dailyAmount.value[x]
Definition	Identifies the quantity expected to be consumed in a given day.
Short	How to consume/day?
Control	0..1 This element is affected by the following invariants: ext-1
Type	Quantity(SimpleQuantity)
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
136. Extension.extension:quantity
Slice Name	quantity
Definition	DSTU2: `CarePlan.activity.detail.quantity` (new:Quantity[SimpleQuantity])
Short	DSTU2: How much to administer/supply/consume (new)
Comments	Element `CarePlan.activity.detail.quantity` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.quantity` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.quantity` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `CarePlan.activity.detail.quantity` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.quantity` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.quantity` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
138. Extension.extension:quantity.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
140. Extension.extension:quantity.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
142. Extension.extension:quantity.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`quantity`
144. Extension.extension:quantity.value[x]
Definition	Identifies the quantity expected to be supplied, administered or consumed by the subject.
Short	How much to administer/supply/consume
Control	0..1 This element is affected by the following invariants: ext-1
Type	Quantity(SimpleQuantity)
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
146. Extension.extension:description
Slice Name	description
Definition	DSTU2: `CarePlan.activity.detail.description` (new:string)
Short	DSTU2: Extra info describing activity to perform (new)
Comments	Element `CarePlan.activity.detail.description` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.description` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.description` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `CarePlan.activity.detail.description` is part of an existing definition because parent element `CarePlan.activity.detail` requires a cross-version extension. Element `CarePlan.activity.detail.description` has a context of CarePlan.activity based on following the parent source element upwards and mapping to `CarePlan`. Element `CarePlan.activity.detail.description` has no mapping targets in FHIR R5. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
148. Extension.extension:description.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
150. Extension.extension:description.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
152. Extension.extension:description.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`description`
154. Extension.extension:description.value[x]
Definition	This provides a textual description of constraints on the intended activity occurrence, including relation to other activities. It may also include objectives, pre-conditions and end-conditions. Finally, it may convey specifics about the activity such as body site, method, route, etc.
Short	Extra info describing activity to perform
Control	0..1 This element is affected by the following invariants: ext-1
Type	string
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
156. Extension.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`http://hl7.org/fhir/1.0/StructureDefinition/extension-CarePlan.activity.detail`
158. Extension.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..0 This element is affected by the following invariants: ext-1
Type	Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)