Describes the intended objective(s) for a patient, group or organization care, for example, weight loss, restoring an activity of daily living, obtaining herd immunity via immunization, meeting a process improvement objective, etc.

Goal can be achieving a particular change or merely maintaining a current state or even slowing a decline.

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

An Extension

DSTU2: Goal.outcome.result[x] additional types from child elements (display, reference)

Element Goal.outcome.result[x] is mapped to FHIR R4B element Goal.outcomeCode as RelatedTo. Element Goal.outcome.result[x] is mapped to FHIR R4B element Goal.outcomeReference as RelatedTo. The mappings for Goal.outcome.result[x] do not cover the following types based on type expansion: display, reference. The standard extension alternate-reference has been mapped as the representation of FHIR DSTU2 element Goal.outcome.result[x] with unmapped reference targets: Observation.

An Extension

DSTU2: Goal.status additional codes

Element Goal.status is mapped to FHIR R4B element Goal.lifecycleStatus as RelatedTo. Element Goal.status is mapped to FHIR R4B element Goal.achievementStatus as SourceIsNarrowerThanTarget. The mappings for Goal.status do not allow expression of the necessary codes, per the bindings on the source and target.

The state of the goal throughout its lifecycle.

This element is labeled as a modifier because the lifecycleStatus contains codes that mark the resource as not currently valid.

Codes that reflect the current state of a goal and whether the goal is still being targeted.

Allows knowing whether goal needs to be further tracked.

Human-readable and/or coded description of a specific desired objective of care, such as "control blood pressure" or "negotiate an obstacle course" or "dance with child at wedding".

If no code is available, use CodeableConcept.text.

Codes providing the details of a particular goal. This will generally be system or implementation guide-specific. In many systems, only the text element will be used.

Without a description of what's trying to be achieved, element has no purpose.

An Extension

DSTU2: Goal.description additional types (string) additional types from child elements (value)

Element Goal.description is mapped to FHIR R4B element Goal.description as SourceIsBroaderThanTarget. The mappings for Goal.description do not cover the following types: string. The mappings for Goal.description do not cover the following types based on type expansion: value.

Identifies the patient, group or organization for whom the goal is being established.

Subject is optional to support annonymized reporting.

An Extension

DSTU2: Goal.subject

Element Goal.subject is mapped to FHIR R4B element Goal.subject as SourceIsBroaderThanTarget. The standard extension alternate-reference has been mapped as the representation of FHIR DSTU2 element Goal.subject with unmapped reference targets: Group, Organization, Patient.

DSTU2: Goal.meta additional types (Meta) additional types from child elements (lastUpdated, profile, security, tag, versionId)

Element Goal.meta is mapped to FHIR R4B element Goal.meta as SourceIsBroaderThanTarget. The mappings for Goal.meta do not cover the following types: Meta. The mappings for Goal.meta do not cover the following types based on type expansion: lastUpdated, profile, security, tag, versionId.

DSTU2: Goal.text additional types (Narrative) additional types from child elements (div, status)

Element Goal.text is mapped to FHIR R4B element Goal.text as SourceIsBroaderThanTarget. The mappings for Goal.text do not cover the following types: Narrative. The mappings for Goal.text do not cover the following types based on type expansion: div, status. Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative.

DSTU2: Goal.outcome.result[x] additional types from child elements (display, reference)

Element Goal.outcome.result[x] is mapped to FHIR R4B element Goal.outcomeCode as RelatedTo. Element Goal.outcome.result[x] is mapped to FHIR R4B element Goal.outcomeReference as RelatedTo. The mappings for Goal.outcome.result[x] do not cover the following types based on type expansion: display, reference. The standard extension alternate-reference has been mapped as the representation of FHIR DSTU2 element Goal.outcome.result[x] with unmapped reference targets: Observation.

DSTU2: Goal.status additional codes

Element Goal.status is mapped to FHIR R4B element Goal.lifecycleStatus as RelatedTo. Element Goal.status is mapped to FHIR R4B element Goal.achievementStatus as SourceIsNarrowerThanTarget. The mappings for Goal.status do not allow expression of the necessary codes, per the bindings on the source and target.

DSTU2: Goal.identifier additional types (Identifier) additional types from child elements (assigner, period, system, type, use, value)

Element Goal.identifier is mapped to FHIR R4B element Goal.identifier as SourceIsBroaderThanTarget. The mappings for Goal.identifier do not cover the following types: Identifier. The mappings for Goal.identifier do not cover the following types based on type expansion: assigner, period, system, type, use, value.

DSTU2: Goal.description additional types (string) additional types from child elements (value)

Element Goal.description is mapped to FHIR R4B element Goal.description as SourceIsBroaderThanTarget. The mappings for Goal.description do not cover the following types: string. The mappings for Goal.description do not cover the following types based on type expansion: value.

DSTU2: Goal.subject

Element Goal.subject is mapped to FHIR R4B element Goal.subject as SourceIsBroaderThanTarget. The standard extension alternate-reference has been mapped as the representation of FHIR DSTU2 element Goal.subject with unmapped reference targets: Group, Organization, Patient.

DSTU2: Goal.statusReason additional types (CodeableConcept) additional types from child elements (coding)

Element Goal.statusReason is mapped to FHIR R4B element Goal.statusReason as SourceIsBroaderThanTarget. The mappings for Goal.statusReason do not cover the following types: CodeableConcept. The mappings for Goal.statusReason do not cover the following types based on type expansion: coding. This will typically be captured for statuses such as rejected, on-hold or cancelled, but could be present for others.

DSTU2: Goal.author

Element Goal.author is mapped to FHIR R4B element Goal.expressedBy as RelatedTo. The standard extension alternate-reference has been mapped as the representation of FHIR DSTU2 element Goal.author with unmapped reference targets: Patient, Practitioner, RelatedPerson. This is the individual reponsible for establishing the goal, not necessarily who recorded it. (For that, use the Provenance resource.).

DSTU2: Goal.addresses

Element Goal.addresses is mapped to FHIR R4B element Goal.addresses as RelatedTo. The standard extension alternate-reference has been mapped as the representation of FHIR DSTU2 element Goal.addresses with unmapped reference targets: Condition, MedicationStatement, NutritionOrder, Observation, ProcedureRequest, RiskAssessment.

DSTU2: Goal.note additional types (Annotation) additional types from child elements (author[x], text, time)

Element Goal.note is mapped to FHIR R4B element Goal.note as SourceIsBroaderThanTarget. The mappings for Goal.note do not cover the following types: Annotation. The mappings for Goal.note do not cover the following types based on type expansion: author[x], text, time. May be used for progress notes, concerns or other related information that doesn't actually describe the goal itself.

Describes the intended objective(s) for a patient, group or organization care, for example, weight loss, restoring an activity of daily living, obtaining herd immunity via immunization, meeting a process improvement objective, etc.

Goal can be achieving a particular change or merely maintaining a current state or even slowing a decline.

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

An Extension

DSTU2: Goal.meta additional types (Meta) additional types from child elements (lastUpdated, profile, security, tag, versionId)

Element Goal.meta is mapped to FHIR R4B element Goal.meta as SourceIsBroaderThanTarget. The mappings for Goal.meta do not cover the following types: Meta. The mappings for Goal.meta do not cover the following types based on type expansion: lastUpdated, profile, security, tag, versionId.

The version specific identifier, as it appears in the version portion of the URL. This value changes when the resource is created, updated, or deleted.

The server assigns this value, and ignores what the client specifies, except in the case that the server is imposing version integrity on updates/deletes.

When the resource last changed - e.g. when the version changed.

This value is always populated except when the resource is first being created. The server / resource manager sets this value; what a client provides is irrelevant. This is equivalent to the HTTP Last-Modified and SHOULD have the same value on a read interaction.

A uri that identifies the source system of the resource. This provides a minimal amount of Provenance information that can be used to track or differentiate the source of information in the resource. The source may identify another FHIR server, document, message, database, etc.

In the provenance resource, this corresponds to Provenance.entity.what[x]. The exact use of the source (and the implied Provenance.entity.role) is left to implementer discretion. Only one nominated source is allowed; for additional provenance details, a full Provenance resource should be used.

This element can be used to indicate where the current master source of a resource that has a canonical URL if the resource is no longer hosted at the canonical URL.

A list of profiles (references to StructureDefinition resources) that this resource claims to conform to. The URL is a reference to StructureDefinition.url.

It is up to the server and/or other infrastructure of policy to determine whether/how these claims are verified and/or updated over time. The list of profile URLs is a set.

Security labels applied to this resource. These tags connect specific resources to the overall security policy and infrastructure.

The security labels can be updated without changing the stated version of the resource. The list of security labels is a set. Uniqueness is based the system/code, and version and display are ignored.

Tags applied to this resource. Tags are intended to be used to identify and relate resources to process and workflow, and applications are not required to consider the tags when interpreting the meaning of a resource.

The tags can be updated without changing the stated version of the resource. The list of tags is a set. Uniqueness is based the system/code, and version and display are ignored.

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

The base language in which the resource is written.

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

IETF language tag

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

An Extension

DSTU2: Goal.text additional types (Narrative) additional types from child elements (div, status)

Element Goal.text is mapped to FHIR R4B element Goal.text as SourceIsBroaderThanTarget. The mappings for Goal.text do not cover the following types: Narrative. The mappings for Goal.text do not cover the following types based on type expansion: div, status. Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative.

The status of the narrative - whether it's entirely generated (from just the defined data or the extensions too), or whether a human authored it and it may contain additional data.

The actual narrative content, a stripped down version of XHTML.

The contents of the html element are an XHTML fragment containing only the basic html formatting elements described in chapters 7-11 and 15 of the HTML 4.0 standard, <a> elements (either name or href), images and internally contained stylesheets. The XHTML content SHALL NOT contain a head, a body, external stylesheet references, scripts, forms, base/link/xlink, frames, iframes and objects.

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

An Extension

DSTU2: Goal.outcome.result[x] additional types from child elements (display, reference)

Element Goal.outcome.result[x] is mapped to FHIR R4B element Goal.outcomeCode as RelatedTo. Element Goal.outcome.result[x] is mapped to FHIR R4B element Goal.outcomeReference as RelatedTo. The mappings for Goal.outcome.result[x] do not cover the following types based on type expansion: display, reference. The standard extension alternate-reference has been mapped as the representation of FHIR DSTU2 element Goal.outcome.result[x] with unmapped reference targets: Observation.

An Extension

DSTU2: Goal.status additional codes

Element Goal.status is mapped to FHIR R4B element Goal.lifecycleStatus as RelatedTo. Element Goal.status is mapped to FHIR R4B element Goal.achievementStatus as SourceIsNarrowerThanTarget. The mappings for Goal.status do not allow expression of the necessary codes, per the bindings on the source and target.

Business identifiers assigned to this goal by the performer or other systems which remain constant as the resource is updated and propagates from server to server.

This is a business identifier, not a resource identifier (see discussion). It is best practice for the identifier to only appear on a single resource instance, however business practices may occasionally dictate that multiple resource instances with the same identifier can exist - possibly even with different resource types. For example, multiple Patient and a Person resource instance might share the same social insurance number.

Allows identification of the goal as it is known by various participating systems and in a way that remains consistent across servers.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

An Extension

DSTU2: Goal.identifier additional types (Identifier) additional types from child elements (assigner, period, system, type, use, value)

Element Goal.identifier is mapped to FHIR R4B element Goal.identifier as SourceIsBroaderThanTarget. The mappings for Goal.identifier do not cover the following types: Identifier. The mappings for Goal.identifier do not cover the following types based on type expansion: assigner, period, system, type, use, value.

The purpose of this identifier.

Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

Allows users to make use of identifiers when the identifier system is not known.

Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

Identifier.system is always case sensitive.

There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

The portion of the identifier typically relevant to the user and which is unique within the context of the system.

If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

Time period during which identifier is/was valid for use.

Organization that issued/manages the identifier.

The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

The state of the goal throughout its lifecycle.

This element is labeled as a modifier because the lifecycleStatus contains codes that mark the resource as not currently valid.

Codes that reflect the current state of a goal and whether the goal is still being targeted.

Allows knowing whether goal needs to be further tracked.

Describes the progression, or lack thereof, towards the goal against the target.

Indicates the progression, or lack thereof, towards the goal against the target.

Indicates a category the goal falls within.

Codes for grouping and sorting goals.

Allows goals to be filtered and sorted.

Identifies the mutually agreed level of importance associated with reaching/sustaining the goal.

Extensions are available to track priorities as established by each participant (i.e. Priority from the patient's perspective, different practitioners' perspectives, family member's perspectives)

The ordinal extension on Coding can be used to convey a numerically comparable ranking to priority. (Keep in mind that different coding systems may use a "low value=important".

The level of importance associated with a goal.

Used for sorting and presenting goals.

Human-readable and/or coded description of a specific desired objective of care, such as "control blood pressure" or "negotiate an obstacle course" or "dance with child at wedding".

If no code is available, use CodeableConcept.text.

Codes providing the details of a particular goal. This will generally be system or implementation guide-specific. In many systems, only the text element will be used.

Without a description of what's trying to be achieved, element has no purpose.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

An Extension

DSTU2: Goal.description additional types (string) additional types from child elements (value)

Element Goal.description is mapped to FHIR R4B element Goal.description as SourceIsBroaderThanTarget. The mappings for Goal.description do not cover the following types: string. The mappings for Goal.description do not cover the following types based on type expansion: value.

A reference to a code defined by a terminology system.

Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

Allows for alternative encodings within a code system, and translations to other code systems.

A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

Very often the text is the same as a displayName of one of the codings.

The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

Identifies the patient, group or organization for whom the goal is being established.

Subject is optional to support annonymized reporting.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

An Extension

DSTU2: Goal.subject

Element Goal.subject is mapped to FHIR R4B element Goal.subject as SourceIsBroaderThanTarget. The standard extension alternate-reference has been mapped as the representation of FHIR DSTU2 element Goal.subject with unmapped reference targets: Group, Organization, Patient.

A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

Plain text narrative that identifies the resource in addition to the resource reference.

This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

The date or event after which the goal should begin being pursued.

Codes describing events that can trigger the initiation of a goal.

Goals can be established prior to there being an intention to start pursuing them; e.g. Goals for post-surgical recovery established prior to surgery.

Indicates what should be done by when.

When multiple targets are present for a single goal instance, all targets must be met for the overall goal to be met.

Allows the progress of the goal to be monitored against an observation or due date. Target is 0..* to support Observations with multiple components, such as blood pressure goals with both a systolic and diastolic target.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

The parameter whose value is being tracked, e.g. body weight, blood pressure, or hemoglobin A1c level.

Codes to identify the value being tracked, e.g. body weight, blood pressure, or hemoglobin A1c level.

The target value of the focus to be achieved to signify the fulfillment of the goal, e.g. 150 pounds, 7.0%. Either the high or low or both values of the range can be specified. When a low value is missing, it indicates that the goal is achieved at any focus value at or below the high value. Similarly, if the high value is missing, it indicates that the goal is achieved at any focus value at or above the low value.

A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Goal.target.measure defines a coded value.

Codes to identify the target value of the focus to be achieved to signify the fulfillment of the goal.

Indicates either the date or the duration after start by which the goal should be met.

Identifies when the goal should be evaluated.

Identifies when the current status. I.e. When initially created, when achieved, when cancelled, etc.

To see the date for past statuses, query history.

Captures the reason for the current status.

This will typically be captured for statuses such as rejected, on-hold or cancelled, but could be present for others.

unique id for the element within a resource (for internal references)

An Extension

DSTU2: Goal.statusReason additional types (CodeableConcept) additional types from child elements (coding)

Element Goal.statusReason is mapped to FHIR R4B element Goal.statusReason as SourceIsBroaderThanTarget. The mappings for Goal.statusReason do not cover the following types: CodeableConcept. The mappings for Goal.statusReason do not cover the following types based on type expansion: coding. This will typically be captured for statuses such as rejected, on-hold or cancelled, but could be present for others.

The actual value

Indicates whose goal this is - patient goal, practitioner goal, etc.

This is the individual responsible for establishing the goal, not necessarily who recorded it. (For that, use the Provenance resource.).

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

An Extension

DSTU2: Goal.author

Element Goal.author is mapped to FHIR R4B element Goal.expressedBy as RelatedTo. The standard extension alternate-reference has been mapped as the representation of FHIR DSTU2 element Goal.author with unmapped reference targets: Patient, Practitioner, RelatedPerson. This is the individual reponsible for establishing the goal, not necessarily who recorded it. (For that, use the Provenance resource.).

A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

Plain text narrative that identifies the resource in addition to the resource reference.

This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

The identified conditions and other health record elements that are intended to be addressed by the goal.

Allows specific goals to explicitly linked to the concerns they're dealing with - makes the goal more understandable.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

An Extension

DSTU2: Goal.addresses

Element Goal.addresses is mapped to FHIR R4B element Goal.addresses as RelatedTo. The standard extension alternate-reference has been mapped as the representation of FHIR DSTU2 element Goal.addresses with unmapped reference targets: Condition, MedicationStatement, NutritionOrder, Observation, ProcedureRequest, RiskAssessment.

A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

Plain text narrative that identifies the resource in addition to the resource reference.

This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

Any comments related to the goal.

May be used for progress notes, concerns or other related information that doesn't actually describe the goal itself.

There's a need to capture information about the goal that doesn't actually describe the goal.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

An Extension

DSTU2: Goal.note additional types (Annotation) additional types from child elements (author[x], text, time)

Element Goal.note is mapped to FHIR R4B element Goal.note as SourceIsBroaderThanTarget. The mappings for Goal.note do not cover the following types: Annotation. The mappings for Goal.note do not cover the following types based on type expansion: author[x], text, time. May be used for progress notes, concerns or other related information that doesn't actually describe the goal itself.

The individual responsible for making the annotation.

Organization is used when there's no need for specific attribution as to who made the comment.

Indicates when this particular annotation was made.

The text of the annotation in markdown format.

Identifies the change (or lack of change) at the point when the status of the goal is assessed.

Note that this should not duplicate the goal status.

The result of the goal; e.g. "25% increase in shoulder mobility", "Anxiety reduced to moderate levels". "15 kg weight loss sustained over 6 months".

Outcome tracking is a key aspect of care planning.

Details of what's changed (or not changed).

The goal outcome is independent of the outcome of the related activities. For example, if the Goal is to achieve a target body weight of 150 lb and a care plan activity is defined to diet, then the care plan’s activity outcome could be calories consumed whereas goal outcome is an observation for the actual body weight measured.

Outcome tracking is a key aspect of care planning.