Financial instrument which may be used to reimburse or pay for health care products and services. Includes both insurance and self-payment.

The Coverage resource contains the insurance card level information, which is customary to provide on claims and other communications between providers and insurers.

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

An Extension

DSTU2: Coverage.group (new:string)

Element Coverage.group has a context of Coverage based on following the parent source element upwards and mapping to Coverage. Element Coverage.group has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).

DSTU2: Coverage.plan (new:string)

Element Coverage.plan has a context of Coverage based on following the parent source element upwards and mapping to Coverage. Element Coverage.plan has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).

DSTU2: Coverage.subPlan (new:string)

Element Coverage.subPlan has a context of Coverage based on following the parent source element upwards and mapping to Coverage. Element Coverage.subPlan has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).

DSTU2: Coverage.sequence (new:positiveInt)

Element Coverage.sequence has a context of Coverage based on following the parent source element upwards and mapping to Coverage. Element Coverage.sequence has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

The status of the resource instance.

This element is labeled as a modifier because the status contains the code entered-in-error that marks the coverage as not currently valid.

A code specifying the state of the resource instance.

Need to track the status of the resource as 'draft' resources may undergo further edits while 'active' resources are immutable and may only have their status changed to 'cancelled'.

The party who benefits from the insurance coverage; the patient when products and/or services are provided.

This is the party who receives treatment for which the costs are reimbursed under the coverage.

The program or plan underwriter or payor including both insurance and non-insurance agreements, such as patient-pay agreements.

May provide multiple identifiers such as insurance company identifier or business identifier (BIN number). For selfpay it may provide multiple paying persons and/or organizations.

Need to identify the issuer to target for claim processing and for coordination of benefit processing.

An Extension

DSTU2: Coverage.issuer additional types from child elements (display, reference)

Element Coverage.issuer is mapped to FHIR R4B element Coverage.payor as RelatedTo. The mappings for Coverage.issuer do not cover the following types based on type expansion: display, reference. The standard extension alternate-reference has been mapped as the representation of FHIR DSTU2 element Coverage.issuer with unmapped reference targets: Organization.

DSTU2: Coverage.meta additional types (Meta) additional types from child elements (lastUpdated, profile, security, tag, versionId)

Element Coverage.meta is mapped to FHIR R4B element Coverage.meta as SourceIsBroaderThanTarget. The mappings for Coverage.meta do not cover the following types: Meta. The mappings for Coverage.meta do not cover the following types based on type expansion: lastUpdated, profile, security, tag, versionId.

DSTU2: Coverage.text additional types (Narrative) additional types from child elements (div, status)

Element Coverage.text is mapped to FHIR R4B element Coverage.text as SourceIsBroaderThanTarget. The mappings for Coverage.text do not cover the following types: Narrative. The mappings for Coverage.text do not cover the following types based on type expansion: div, status. Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative.

DSTU2: Coverage.group (new:string)

Element Coverage.group has a context of Coverage based on following the parent source element upwards and mapping to Coverage. Element Coverage.group has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).

DSTU2: Coverage.plan (new:string)

Element Coverage.plan has a context of Coverage based on following the parent source element upwards and mapping to Coverage. Element Coverage.plan has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).

DSTU2: Coverage.subPlan (new:string)

Element Coverage.subPlan has a context of Coverage based on following the parent source element upwards and mapping to Coverage. Element Coverage.subPlan has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).

DSTU2: Coverage.sequence (new:positiveInt)

Element Coverage.sequence has a context of Coverage based on following the parent source element upwards and mapping to Coverage. Element Coverage.sequence has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).

DSTU2: Coverage.bin additional types (Identifier) additional types from child elements (assigner, period, system, type, use, value)

Element Coverage.bin is mapped to FHIR R4B element Coverage.identifier as RelatedTo. The mappings for Coverage.bin do not cover the following types: Identifier. The mappings for Coverage.bin do not cover the following types based on type expansion: assigner, period, system, type, use, value.

DSTU2: Coverage.identifier additional types (Identifier) additional types from child elements (assigner, period, system, type, use, value)

Element Coverage.identifier is mapped to FHIR R4B element Coverage.identifier as SourceIsBroaderThanTarget. The mappings for Coverage.identifier do not cover the following types: Identifier. The mappings for Coverage.identifier do not cover the following types based on type expansion: assigner, period, system, type, use, value.

DSTU2: Coverage.subscriber additional types from child elements (display, reference)

Element Coverage.subscriber is mapped to FHIR R4B element Coverage.subscriber as SourceIsBroaderThanTarget. The mappings for Coverage.subscriber do not cover the following types based on type expansion: display, reference. The standard extension alternate-reference has been mapped as the representation of FHIR DSTU2 element Coverage.subscriber with unmapped reference targets: Patient.

DSTU2: Coverage.subscriberId additional types (Identifier) additional types from child elements (assigner, period, type)

Element Coverage.subscriberId is mapped to FHIR R4B element Coverage.subscriberId as SourceIsBroaderThanTarget. The mappings for Coverage.subscriberId do not cover the following types: Identifier. The mappings for Coverage.subscriberId do not cover the following types based on type expansion: assigner, period, type.

DSTU2: Coverage.dependent additional types (positiveInt) additional types from child elements (value)

Element Coverage.dependent is mapped to FHIR R4B element Coverage.dependent as SourceIsBroaderThanTarget. The mappings for Coverage.dependent do not cover the following types: positiveInt. The mappings for Coverage.dependent do not cover the following types based on type expansion: value.

DSTU2: Coverage.period additional types (Period) additional types from child elements (end, start)

Element Coverage.period is mapped to FHIR R4B element Coverage.period as SourceIsBroaderThanTarget. The mappings for Coverage.period do not cover the following types: Period. The mappings for Coverage.period do not cover the following types based on type expansion: end, start.

DSTU2: Coverage.issuer additional types from child elements (display, reference)

Element Coverage.issuer is mapped to FHIR R4B element Coverage.payor as RelatedTo. The mappings for Coverage.issuer do not cover the following types based on type expansion: display, reference. The standard extension alternate-reference has been mapped as the representation of FHIR DSTU2 element Coverage.issuer with unmapped reference targets: Organization.

DSTU2: Coverage.network additional types (Identifier) additional types from child elements (assigner, period, type)

Element Coverage.network is mapped to FHIR R4B element Coverage.network as SourceIsBroaderThanTarget. The mappings for Coverage.network do not cover the following types: Identifier. The mappings for Coverage.network do not cover the following types based on type expansion: assigner, period, type.

DSTU2: Coverage.contract additional types from child elements (display, reference)

Element Coverage.contract is mapped to FHIR R4B element Coverage.contract as SourceIsBroaderThanTarget. The mappings for Coverage.contract do not cover the following types based on type expansion: display, reference. The standard extension alternate-reference has been mapped as the representation of FHIR DSTU2 element Coverage.contract with unmapped reference targets: Contract.

Financial instrument which may be used to reimburse or pay for health care products and services. Includes both insurance and self-payment.

The Coverage resource contains the insurance card level information, which is customary to provide on claims and other communications between providers and insurers.

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

An Extension

DSTU2: Coverage.meta additional types (Meta) additional types from child elements (lastUpdated, profile, security, tag, versionId)

Element Coverage.meta is mapped to FHIR R4B element Coverage.meta as SourceIsBroaderThanTarget. The mappings for Coverage.meta do not cover the following types: Meta. The mappings for Coverage.meta do not cover the following types based on type expansion: lastUpdated, profile, security, tag, versionId.

The version specific identifier, as it appears in the version portion of the URL. This value changes when the resource is created, updated, or deleted.

The server assigns this value, and ignores what the client specifies, except in the case that the server is imposing version integrity on updates/deletes.

When the resource last changed - e.g. when the version changed.

This value is always populated except when the resource is first being created. The server / resource manager sets this value; what a client provides is irrelevant. This is equivalent to the HTTP Last-Modified and SHOULD have the same value on a read interaction.

A uri that identifies the source system of the resource. This provides a minimal amount of Provenance information that can be used to track or differentiate the source of information in the resource. The source may identify another FHIR server, document, message, database, etc.

In the provenance resource, this corresponds to Provenance.entity.what[x]. The exact use of the source (and the implied Provenance.entity.role) is left to implementer discretion. Only one nominated source is allowed; for additional provenance details, a full Provenance resource should be used.

This element can be used to indicate where the current master source of a resource that has a canonical URL if the resource is no longer hosted at the canonical URL.

A list of profiles (references to StructureDefinition resources) that this resource claims to conform to. The URL is a reference to StructureDefinition.url.

It is up to the server and/or other infrastructure of policy to determine whether/how these claims are verified and/or updated over time. The list of profile URLs is a set.

Security labels applied to this resource. These tags connect specific resources to the overall security policy and infrastructure.

The security labels can be updated without changing the stated version of the resource. The list of security labels is a set. Uniqueness is based the system/code, and version and display are ignored.

Tags applied to this resource. Tags are intended to be used to identify and relate resources to process and workflow, and applications are not required to consider the tags when interpreting the meaning of a resource.

The tags can be updated without changing the stated version of the resource. The list of tags is a set. Uniqueness is based the system/code, and version and display are ignored.

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

The base language in which the resource is written.

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

IETF language tag

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

An Extension

DSTU2: Coverage.text additional types (Narrative) additional types from child elements (div, status)

Element Coverage.text is mapped to FHIR R4B element Coverage.text as SourceIsBroaderThanTarget. The mappings for Coverage.text do not cover the following types: Narrative. The mappings for Coverage.text do not cover the following types based on type expansion: div, status. Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative.

The status of the narrative - whether it's entirely generated (from just the defined data or the extensions too), or whether a human authored it and it may contain additional data.

The actual narrative content, a stripped down version of XHTML.

The contents of the html element are an XHTML fragment containing only the basic html formatting elements described in chapters 7-11 and 15 of the HTML 4.0 standard, <a> elements (either name or href), images and internally contained stylesheets. The XHTML content SHALL NOT contain a head, a body, external stylesheet references, scripts, forms, base/link/xlink, frames, iframes and objects.

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

An Extension

DSTU2: Coverage.group (new:string)

Element Coverage.group has a context of Coverage based on following the parent source element upwards and mapping to Coverage. Element Coverage.group has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).

DSTU2: Coverage.plan (new:string)

Element Coverage.plan has a context of Coverage based on following the parent source element upwards and mapping to Coverage. Element Coverage.plan has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).

DSTU2: Coverage.subPlan (new:string)

Element Coverage.subPlan has a context of Coverage based on following the parent source element upwards and mapping to Coverage. Element Coverage.subPlan has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).

DSTU2: Coverage.sequence (new:positiveInt)

Element Coverage.sequence has a context of Coverage based on following the parent source element upwards and mapping to Coverage. Element Coverage.sequence has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

A unique identifier assigned to this coverage.

The main (and possibly only) identifier for the coverage - often referred to as a Member Id, Certificate number, Personal Health Number or Case ID. May be constructed as the concatenation of the Coverage.SubscriberID and the Coverage.dependant.

Allows coverages to be distinguished and referenced.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

An Extension

DSTU2: Coverage.bin additional types (Identifier) additional types from child elements (assigner, period, system, type, use, value)

Element Coverage.bin is mapped to FHIR R4B element Coverage.identifier as RelatedTo. The mappings for Coverage.bin do not cover the following types: Identifier. The mappings for Coverage.bin do not cover the following types based on type expansion: assigner, period, system, type, use, value.

DSTU2: Coverage.identifier additional types (Identifier) additional types from child elements (assigner, period, system, type, use, value)

Element Coverage.identifier is mapped to FHIR R4B element Coverage.identifier as SourceIsBroaderThanTarget. The mappings for Coverage.identifier do not cover the following types: Identifier. The mappings for Coverage.identifier do not cover the following types based on type expansion: assigner, period, system, type, use, value.

The purpose of this identifier.

Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

Allows users to make use of identifiers when the identifier system is not known.

Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

Identifier.system is always case sensitive.

There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

The portion of the identifier typically relevant to the user and which is unique within the context of the system.

If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

Time period during which identifier is/was valid for use.

Organization that issued/manages the identifier.

The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

The status of the resource instance.

This element is labeled as a modifier because the status contains the code entered-in-error that marks the coverage as not currently valid.

A code specifying the state of the resource instance.

Need to track the status of the resource as 'draft' resources may undergo further edits while 'active' resources are immutable and may only have their status changed to 'cancelled'.

The type of coverage: social program, medical plan, accident coverage (workers compensation, auto), group health or payment by an individual or organization.

The type of insurance: public health, worker compensation; private accident, auto, private health, etc.) or a direct payment by an individual or organization.

The order of application of coverages is dependent on the types of coverage.

The party who 'owns' the insurance policy.

For example: may be an individual, corporation or the subscriber's employer.

This provides employer information in the case of Worker's Compensation and other policies.

The party who has signed-up for or 'owns' the contractual relationship to the policy or to whom the benefit of the policy for services rendered to them or their family is due.

May be self or a parent in the case of dependants.

This is the party who is entitled to the benfits under the policy.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

Plain text narrative that identifies the resource in addition to the resource reference.

This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

The insurer assigned ID for the Subscriber.

The insurer requires this identifier on correspondance and claims (digital and otherwise).

unique id for the element within a resource (for internal references)

An Extension

DSTU2: Coverage.subscriberId additional types (Identifier) additional types from child elements (assigner, period, type)

Element Coverage.subscriberId is mapped to FHIR R4B element Coverage.subscriberId as SourceIsBroaderThanTarget. The mappings for Coverage.subscriberId do not cover the following types: Identifier. The mappings for Coverage.subscriberId do not cover the following types based on type expansion: assigner, period, type.

The actual value

The party who benefits from the insurance coverage; the patient when products and/or services are provided.

This is the party who receives treatment for which the costs are reimbursed under the coverage.

A unique identifier for a dependent under the coverage.

Periodically the member number is constructed from the subscriberId and the dependant number.

For some coverages a single identifier is issued to the Subscriber and then a unique dependent number is issued to each beneficiary.

unique id for the element within a resource (for internal references)

An Extension

DSTU2: Coverage.dependent additional types (positiveInt) additional types from child elements (value)

Element Coverage.dependent is mapped to FHIR R4B element Coverage.dependent as SourceIsBroaderThanTarget. The mappings for Coverage.dependent do not cover the following types: positiveInt. The mappings for Coverage.dependent do not cover the following types based on type expansion: value.

The actual value

The relationship of beneficiary (patient) to the subscriber.

Typically, an individual uses policies which are theirs (relationship='self') before policies owned by others.

The relationship between the Subscriber and the Beneficiary (insured/covered party/patient).

To determine relationship between the patient and the subscriber to determine coordination of benefits.

Time period during which the coverage is in force. A missing start date indicates the start date isn't known, a missing end date means the coverage is continuing to be in force.

Some insurers require the submission of the coverage term.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

An Extension

DSTU2: Coverage.period additional types (Period) additional types from child elements (end, start)

Element Coverage.period is mapped to FHIR R4B element Coverage.period as SourceIsBroaderThanTarget. The mappings for Coverage.period do not cover the following types: Period. The mappings for Coverage.period do not cover the following types based on type expansion: end, start.

The start of the period. The boundary is inclusive.

If the low element is missing, the meaning is that the low boundary is not known.

The end of the period. If the end of the period is missing, it means no end was known or planned at the time the instance was created. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.

The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03.

The program or plan underwriter or payor including both insurance and non-insurance agreements, such as patient-pay agreements.

May provide multiple identifiers such as insurance company identifier or business identifier (BIN number). For selfpay it may provide multiple paying persons and/or organizations.

Need to identify the issuer to target for claim processing and for coordination of benefit processing.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

An Extension

DSTU2: Coverage.issuer additional types from child elements (display, reference)

Element Coverage.issuer is mapped to FHIR R4B element Coverage.payor as RelatedTo. The mappings for Coverage.issuer do not cover the following types based on type expansion: display, reference. The standard extension alternate-reference has been mapped as the representation of FHIR DSTU2 element Coverage.issuer with unmapped reference targets: Organization.

A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

Plain text narrative that identifies the resource in addition to the resource reference.

This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

A suite of underwriter specific classifiers.

For example may be used to identify a class of coverage or employer group, Policy, Plan.

The codes provided on the health card which identify or confirm the specific policy for the insurer.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

The type of classification for which an insurer-specific class label or number and optional name is provided, for example may be used to identify a class of coverage or employer group, Policy, Plan.

The policy classifications, eg. Group, Plan, Class, etc.

The insurer issued label for a specific health card value.

The alphanumeric string value associated with the insurer issued label.

For example, the Group or Plan number.

The insurer issued label and value are necessary to identify the specific policy.

A short description for the class.

Used to provide a meaningful description in correspondence to the patient.

The order of applicability of this coverage relative to other coverages which are currently in force. Note, there may be gaps in the numbering and this does not imply primary, secondary etc. as the specific positioning of coverages depends upon the episode of care.

Used in managing the coordination of benefits.

The insurer-specific identifier for the insurer-defined network of providers to which the beneficiary may seek treatment which will be covered at the 'in-network' rate, otherwise 'out of network' terms and conditions apply.

Used in referral for treatment and in claims processing.

unique id for the element within a resource (for internal references)

An Extension

DSTU2: Coverage.network additional types (Identifier) additional types from child elements (assigner, period, type)

Element Coverage.network is mapped to FHIR R4B element Coverage.network as SourceIsBroaderThanTarget. The mappings for Coverage.network do not cover the following types: Identifier. The mappings for Coverage.network do not cover the following types based on type expansion: assigner, period, type.

The actual value

A suite of codes indicating the cost category and associated amount which have been detailed in the policy and may have been included on the health card.

For example by knowing the patient visit co-pay, the provider can collect the amount prior to undertaking treatment.

Required by providers to manage financial transaction with the patient.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

The category of patient centric costs associated with treatment.

For example visit, specialist visits, emergency, inpatient care, etc.

The types of services to which patient copayments are specified.

Needed to identify the category associated with the amount for the patient.

The amount due from the patient for the cost category.

Amount may be expressed as a percentage of the service/product cost or a fixed amount of currency.

Needed to identify the amount for the patient associated with the category.

A suite of codes indicating exceptions or reductions to patient costs and their effective periods.

Required by providers to manage financial transaction with the patient.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

The code for the specific exception.

The types of exceptions from the part or full value of financial obligations such as copays.

Needed to identify the exception associated with the amount for the patient.

The timeframe during when the exception is in force.

Needed to identify the applicable timeframe for the exception for the correct calculation of patient costs.

When 'subrogation=true' this insurance instance has been included not for adjudication but to provide insurers with the details to recover costs.

Typically, automotive and worker's compensation policies would be flagged with 'subrogation=true' to enable healthcare payors to collect against accident claims.

See definition for when to be used.

The policy(s) which constitute this insurance coverage.

To reference the legally binding contract between the policy holder and the insurer.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

An Extension

DSTU2: Coverage.contract additional types from child elements (display, reference)

Element Coverage.contract is mapped to FHIR R4B element Coverage.contract as SourceIsBroaderThanTarget. The mappings for Coverage.contract do not cover the following types based on type expansion: display, reference. The standard extension alternate-reference has been mapped as the representation of FHIR DSTU2 element Coverage.contract with unmapped reference targets: Contract.

A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

Plain text narrative that identifies the resource in addition to the resource reference.

This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.