Retrieval of Real World Data for Clinical Research
1.0.0-ballot - ballot International flag

This page is part of the Retrieval of Real World Data for Clinical Research (v1.0.0-ballot: STU1 Ballot 1) based on FHIR R4. . For a full list of available versions, see the Directory of published versions

Resource Profile: ConditionRwd - Detailed Descriptions

Active as of 2022-12-04

Definitions for the ConditionRwd resource profile.

Guidance on how to interpret the contents of this table can be found here.

1. Condition
2. Condition.encounter
Must Supporttrue
3. Condition.recordedDate
Must Supporttrue

Guidance on how to interpret the contents of this table can be found here.

1. Condition
Definition

A clinical condition, problem, diagnosis, or other event, situation, issue, or clinical concept that has risen to a level of concern.

Control0..*
InvariantsDefined on this element
con-3: Condition.clinicalStatus SHALL be present if verificationStatus is not entered-in-error and category is problem-list-item (: clinicalStatus.exists() or verificationStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-ver-status' and code = 'entered-in-error').exists() or category.select($this='problem-list-item').empty())
con-4: If condition is abated, then clinicalStatus must be either inactive, resolved, or remission (: abatement.empty() or clinicalStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-clinical' and (code='resolved' or code='remission' or code='inactive')).exists())
con-5: Condition.clinicalStatus SHALL NOT be present if verification Status is entered-in-error (: verificationStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-ver-status' and code='entered-in-error').empty() or clinicalStatus.empty())
dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (: contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (: contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (: contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (: contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (: text.`div`.exists())
2. Condition.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

Control0..1
Typeuri
Is Modifiertrue
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
3. Condition.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
4. Condition.clinicalStatus
Definition

A concept that may be defined by a formal reference to a terminology or ontology or may be provided by text.

The clinical status of the condition.

Control10..1 This element is affected by the following invariants: ele-1, con-3, con-4, con-5
BindingThe codes SHALL be taken from ConditionClinicalStatusCodes

The clinical status of the condition or diagnosis.

TypeCodeableConcept(CodeableConceptIPS)
Must Supporttrue
Comments

Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.

The data type is CodeableConcept because clinicalStatus has some clinical judgment involved, such that there might need to be more specificity than the required FHIR value set allows. For example, a SNOMED coding might allow for additional specificity.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
5. Condition.category
Definition

A category assigned to the condition. In this profile, a health problem of the patient, therefore a 'problem-list-item'.

A category assigned to the condition.

Control0..* This element is affected by the following invariants: ele-1
BindingThe codes SHOULD be taken from Problem Type - IPSThe codes SHALL be taken from ConditionCategoryCodes; other codes may be used where these codes are not suitable
Additional BindingsPurposeDocumentation
Problem Type (LOINC)Candidate Validation Binding

An alternative additional binding to the LOINC "Problem" code - retained for backward compatibility.

TypeCodeableConcept(CodeableConceptIPS)
Must Supporttrue
Comments

In this profile, Condition represents a health problem of the patient. Therefore one of the category value(s) must be problem-list-item.

The categorization is often highly contextual and may appear poorly differentiated or not very useful in other contexts.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
6. Condition.severity
Definition

A concept that may be defined by a formal reference to a terminology or ontology or may be provided by text.

A subjective assessment of the severity of the condition as evaluated by the clinician.

Control0..1 This element is affected by the following invariants: ele-1
BindingThe codes SHOULD be taken from Condition/DiagnosisSeverity
Additional BindingsPurposeDocumentation
Problem Severity - IPSCandidate Validation Binding

An alternative additional binding to LOINC answer codes for condition/problem severity

TypeCodeableConcept(CodeableConceptIPS)
Must Supporttrue
Comments

Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.

Coding of the severity with a terminology is preferred, where possible.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
7. Condition.code
Definition

Identification of the condition, problem or diagnosis or recording of "problem absent" or of "problems unknown".

Identification of the condition, problem or diagnosis.

Control10..1 This element is affected by the following invariants: ele-1
BindingThe codes SHOULD be taken from Problems - SNOMED CT + Absent/Unknown - IPSFor example codes, see Condition/Problem/DiagnosisCodes

Code for a clinical problem that is selected from SNOMED CT or a code for absent/unknown problem

Identification of the condition or diagnosis.

Additional BindingsPurposeDocumentation
Problems - SNOMED CT IPS Free SetCandidate Validation Binding

Codes for a clinical problem in SNOMED IPS Free Set

Absent or Unknown Problems - IPSCandidate Validation Binding

Codes for absent or unknown problems

TypeCodeableConcept(CodeableConceptIPS)
Must Supporttrue
Requirements

0..1 to account for primarily narrative only resources.

Alternate Namestype
Comments

Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
8. Condition.subject
Definition

Indicates the patient or group who the condition record is associated with.

Control1..1
TypeReference(PatientUvIps|Patient|Group)
Must Supporttrue
Requirements

Group is typically used for veterinary or public health use cases.

Alternate Namespatient
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
9. Condition.subject.reference
Definition

A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

Control10..1 This element is affected by the following invariants: ref-1
Typestring
Must Supporttrue
Comments

Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
10. Condition.encounter
Definition

The Encounter during which this Condition was created or to which the creation of this record is tightly associated.

Control0..1
TypeReference(Encounter)
Must Supporttrue
Comments

This will typically be the encounter the event occurred within, but some activities may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter. This record indicates the encounter this particular record is associated with. In the case of a "new" diagnosis reflecting ongoing/revised information about the condition, this might be distinct from the first encounter in which the underlying condition was first "known".

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
11. Condition.onset[x]
Definition

Estimated or actual date or date-time the condition began, in the opinion of the clinician.

Control0..1
TypeChoice of: dateTime, Age, Period, Range, string
[x] NoteSee Choice of Data Types for further information about how to use [x]
Must Supporttrue
Must Support TypesdateTime
Comments

Age is generally used when the patient reports an age at which the Condition began to occur.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
12. Condition.recordedDate
Definition

The recordedDate represents when this particular Condition record was created in the system, which is often a system-generated date.

Control0..1
TypedateTime
Must Supporttrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be found here.

1. Condition
Definition

A clinical condition, problem, diagnosis, or other event, situation, issue, or clinical concept that has risen to a level of concern.

Control0..*
2. Condition.id
Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

Control0..1
Typeid
Comments

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

3. Condition.meta
Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

Control0..1
TypeMeta
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
4. Condition.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

Control0..1
Typeuri
Is Modifiertrue
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
5. Condition.language
Definition

The base language in which the resource is written.

Control0..1
BindingThe codes SHOULD be taken from CommonLanguages A human language
Additional BindingsPurpose
AllLanguagesMax Binding
Typecode
Comments

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
6. Condition.text
Definition

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

Control0..1
TypeNarrative
Alternate Namesnarrative, html, xhtml, display
Comments

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
7. Condition.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

Control0..*
TypeResource
Alternate Namesinline resources, anonymous resources, contained resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

8. Condition.extension
Definition

May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
9. Condition.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
10. Condition.identifier
Definition

Business identifiers assigned to this condition by the performer or other systems which remain constant as the resource is updated and propagates from server to server.

NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..*
TypeIdentifier
Requirements

Allows identification of the condition as it is known by various participating systems and in a way that remains consistent across servers.

Comments

This is a business identifier, not a resource identifier (see discussion). It is best practice for the identifier to only appear on a single resource instance, however business practices may occasionally dictate that multiple resource instances with the same identifier can exist - possibly even with different resource types. For example, multiple Patient and a Person resource instance might share the same social insurance number.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
11. Condition.clinicalStatus
Definition

A concept that may be defined by a formal reference to a terminology or ontology or may be provided by text.

Control1..1 This element is affected by the following invariants: ele-1
BindingThe codes SHALL be taken from ConditionClinicalStatusCodes The clinical status of the condition or diagnosis
TypeCodeableConcept(CodeableConceptIPS)
Must Supporttrue
Comments

Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
12. Condition.verificationStatus
Definition

A concept that may be defined by a formal reference to a terminology or ontology or may be provided by text.

Control0..1 This element is affected by the following invariants: ele-1
BindingThe codes SHALL be taken from ConditionVerificationStatus The verification status to support or decline the clinical status of the condition or diagnosis
TypeCodeableConcept(CodeableConceptIPS)
Comments

This element is labeled as a modifier because the status contains the code refuted and entered-in-error that mark the Condition as not currently valid.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
13. Condition.category
Definition

A category assigned to the condition. In this profile, a health problem of the patient, therefore a 'problem-list-item'.

Control0..* This element is affected by the following invariants: ele-1
BindingThe codes SHOULD be taken from Problem Type - IPS
Additional BindingsPurposeDocumentation
Problem Type (LOINC)Candidate Validation Binding

An alternative additional binding to the LOINC "Problem" code - retained for backward compatibility.

TypeCodeableConcept(CodeableConceptIPS)
Must Supporttrue
Comments

In this profile, Condition represents a health problem of the patient. Therefore one of the category value(s) must be problem-list-item.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
14. Condition.severity
Definition

A concept that may be defined by a formal reference to a terminology or ontology or may be provided by text.

Control0..1 This element is affected by the following invariants: ele-1
BindingThe codes SHOULD be taken from Condition/DiagnosisSeverity
Additional BindingsPurposeDocumentation
Problem Severity - IPSCandidate Validation Binding

An alternative additional binding to LOINC answer codes for condition/problem severity

TypeCodeableConcept(CodeableConceptIPS)
Must Supporttrue
Comments

Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
15. Condition.code
Definition

Identification of the condition, problem or diagnosis or recording of "problem absent" or of "problems unknown".

Control1..1 This element is affected by the following invariants: ele-1
BindingThe codes SHOULD be taken from Problems - SNOMED CT + Absent/Unknown - IPS Code for a clinical problem that is selected from SNOMED CT or a code for absent/unknown proble
Additional BindingsPurposeDocumentation
Problems - SNOMED CT IPS Free SetCandidate Validation Binding

Codes for a clinical problem in SNOMED IPS Free Set

Absent or Unknown Problems - IPSCandidate Validation Binding

Codes for absent or unknown problems

TypeCodeableConcept(CodeableConceptIPS)
Must Supporttrue
Requirements

0..1 to account for primarily narrative only resources.

Comments

Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
16. Condition.bodySite
Definition

A concept that may be defined by a formal reference to a terminology or ontology or may be provided by text.

Control0..* This element is affected by the following invariants: ele-1
BindingFor example codes, see SNOMEDCTBodyStructures
TypeCodeableConcept(CodeableConceptIPS)
Comments

Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
17. Condition.subject
Definition

Indicates the patient or group who the condition record is associated with.

Control1..1
TypeReference(PatientUvIps)
Must Supporttrue
Requirements

Group is typically used for veterinary or public health use cases.

Alternate Namespatient
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
18. Condition.subject.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
19. Condition.subject.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Condition.subject.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
20. Condition.subject.reference
Definition

A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

Control1..1 This element is affected by the following invariants: ref-1
Typestring
Must Supporttrue
Comments

Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
21. Condition.subject.type
Definition

The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

Control0..1
BindingThe codes SHALL be taken from ResourceType; other codes may be used where these codes are not suitable Aa resource (or, for logical models, the URI of the logical model)
Typeuri
Comments

This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
22. Condition.subject.identifier
Definition

An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..1
TypeIdentifier
Comments

When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
23. Condition.subject.display
Definition

Plain text narrative that identifies the resource in addition to the resource reference.

Control0..1
Typestring
Comments

This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
24. Condition.encounter
Definition

The Encounter during which this Condition was created or to which the creation of this record is tightly associated.

Control0..1
TypeReference(Encounter)
Must Supporttrue
Comments

This will typically be the encounter the event occurred within, but some activities may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter. This record indicates the encounter this particular record is associated with. In the case of a "new" diagnosis reflecting ongoing/revised information about the condition, this might be distinct from the first encounter in which the underlying condition was first "known".

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
25. Condition.onset[x]
Definition

Estimated or actual date or date-time the condition began, in the opinion of the clinician.

Control0..1
TypeChoice of: dateTime, Age, Period, Range, string
[x] NoteSee Choice of Data Types for further information about how to use [x]
Must Supporttrue
Must Support TypesdateTime
Comments

Age is generally used when the patient reports an age at which the Condition began to occur.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
26. Condition.abatement[x]
Definition

The date or estimated date that the condition resolved or went into remission. This is called "abatement" because of the many overloaded connotations associated with "remission" or "resolution" - Conditions are never really resolved, but they can abate.

Control0..1 This element is affected by the following invariants: con-4
TypeChoice of: dateTime, Age, Period, Range, string
[x] NoteSee Choice of Data Types for further information about how to use [x]
Comments

There is no explicit distinction between resolution and remission because in many cases the distinction is not clear. Age is generally used when the patient reports an age at which the Condition abated. If there is no abatement element, it is unknown whether the condition has resolved or entered remission; applications and users should generally assume that the condition is still valid. When abatementString exists, it implies the condition is abated.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
27. Condition.recordedDate
Definition

The recordedDate represents when this particular Condition record was created in the system, which is often a system-generated date.

Control0..1
TypedateTime
Must Supporttrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
28. Condition.recorder
Definition

Individual who recorded the record and takes responsibility for its content.

Control0..1
TypeReference(Practitioner|PractitionerRole|Patient|RelatedPerson)
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
29. Condition.asserter
Definition

Individual who is making the condition statement.

Control0..1
TypeReference(Practitioner|PractitionerRole|Patient|RelatedPerson)
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
30. Condition.stage
Definition

Clinical stage or grade of a condition. May include formal severity assessments.

Control0..*
TypeBackboneElement
InvariantsDefined on this element
con-1: Stage SHALL have summary or assessment (: summary.exists() or assessment.exists())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
31. Condition.stage.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
32. Condition.stage.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
33. Condition.stage.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
34. Condition.stage.summary
Definition

A simple summary of the stage such as "Stage 3". The determination of the stage is disease-specific.

Control0..1 This element is affected by the following invariants: con-1
BindingFor example codes, see ConditionStage Codes describing condition stages (e.g. Cancer stages)
TypeCodeableConcept
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
35. Condition.stage.assessment
Definition

Reference to a formal record of the evidence on which the staging assessment is based.

Control0..* This element is affected by the following invariants: con-1
TypeReference(ClinicalImpression|DiagnosticReport|Observation)
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
36. Condition.stage.type
Definition

The kind of staging, such as pathological or clinical staging.

Control0..1
BindingFor example codes, see ConditionStageType Codes describing the kind of condition staging (e.g. clinical or pathological)
TypeCodeableConcept
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
37. Condition.evidence
Definition

Supporting evidence / manifestations that are the basis of the Condition's verification status, such as evidence that confirmed or refuted the condition.

Control0..*
TypeBackboneElement
Comments

The evidence may be a simple list of coded symptoms/manifestations, or references to observations or formal assessments, or both.

InvariantsDefined on this element
con-2: evidence SHALL have code or details (: code.exists() or detail.exists())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
38. Condition.evidence.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
39. Condition.evidence.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
40. Condition.evidence.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
41. Condition.evidence.code
Definition

A manifestation or symptom that led to the recording of this condition.

Control0..* This element is affected by the following invariants: con-2
BindingFor example codes, see ManifestationAndSymptomCodes Codes that describe the manifestation or symptoms of a condition
TypeCodeableConcept
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
42. Condition.evidence.detail
Definition

Links to other relevant information, including pathology reports.

Control0..* This element is affected by the following invariants: con-2
TypeReference(Resource)
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
43. Condition.note
Definition

Additional information about the Condition. This is a general notes/comments entry for description of the Condition, its diagnosis and prognosis.

Control0..*
TypeAnnotation
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))