Real Time Location Services Implementation Guide
1.0.0-ballot - CI Build International flag

This page is part of the Real Time Location Services Implementation Guide (v1.0.0-ballot: STU 1.0 Ballot 1) based on FHIR v5.0.0. . For a full list of available versions, see the Directory of published versions

Resource Profile: RTLSSubscription - Detailed Descriptions

Page standards status: Informative

Definitions for the rtlsSubscription resource profile.

Guidance on how to interpret the contents of this table can be found here.

1. Subscription
2. Subscription.identifier
NoteThis is a business identifier, not a resource identifier (see discussion)
Control10..*
Must Supporttrue
3. Subscription.status
Must Supporttrue
4. Subscription.topic
Typecanonical(RTLSSubscriptionTopic|SubscriptionTopic)
Must Supporttrue
5. Subscription.channelType
Must Supporttrue
6. Subscription.endpoint
Must Supporttrue

Guidance on how to interpret the contents of this table can be found here.

1. Subscription
Definition

The subscription resource describes a particular client's request to be notified about a SubscriptionTopic.

Control0..*
Summaryfalse
Alternate NamesWebHook, Hook, Routing Rule
InvariantsDefined on this element
dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (: contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (: contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (: contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (: contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (: text.`div`.exists())
2. Subscription.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

Control0..1
Typeuri
Is Modifiertrue
Summarytrue
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
3. Subscription.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

Control0..* This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5
TypeResource
Summaryfalse
Alternate Namesinline resources, anonymous resources, contained resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.

4. Subscription.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
5. Subscription.identifier
Definition

A formal identifier that is used to identify this code system when it is represented in other formats, or referenced in a specification, model, design or an instance.

NoteThis is a business identifier, not a resource identifier (see discussion)
Control10..*
TypeIdentifier
Must Supporttrue
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
6. Subscription.status
Definition

The status of the subscription, which marks the server state for managing the subscription.

Control1..1
BindingThe codes SHALL be taken from SubscriptionStatusCodes

The status of a subscription.

Typecode
Is Modifiertrue
Must Supporttrue
Summarytrue
Comments

A client can only submit subscription resources in the requested or off state. Only the server can move a subscription from requested to active, and then to error. Either the server or the client can turn a subscription off.

This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
7. Subscription.topic
Definition

The reference to the subscription topic to be notified about.

Control1..1
Typecanonical(RTLSSubscriptionTopic|SubscriptionTopic)
Must Supporttrue
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
8. Subscription.channelType
Definition

The type of channel to send notifications on.

Control1..1
BindingThe codes SHALL be taken from SubscriptionChannelType; other codes may be used where these codes are not suitable

The type of method used to execute a subscription.

TypeCoding
Must Supporttrue
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
9. Subscription.endpoint
Definition

The url that describes the actual end-point to send notifications to.

Control0..1
Typeurl
Must Supporttrue
Summarytrue
Comments

For rest-hook the end-point must be an http: or https: URL; for websockets, ws: or wss:; for email, a mailto: url; and for message the endpoint can be in any form of url the server understands (usually, http/s: or mllp:). The URI is allowed to be relative; in which case, it is relative to the server end-point (since there may be more than one, clients should avoid using relative URIs).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be found here.

1. Subscription
Definition

The subscription resource describes a particular client's request to be notified about a SubscriptionTopic.

Control0..*
Summaryfalse
Alternate NamesWebHook, Hook, Routing Rule
2. Subscription.id
Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

Control0..1
Typeid
Summarytrue
Comments

Within the context of the FHIR RESTful interactions, the resource has an id except for cases like the create and conditional update. Otherwise, the use of the resouce id depends on the given use case.

3. Subscription.meta
Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

Control0..1
TypeMeta
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
4. Subscription.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

Control0..1
Typeuri
Is Modifiertrue
Summarytrue
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
5. Subscription.language
Definition

The base language in which the resource is written.

Control0..1
BindingThe codes SHALL be taken from AllLanguages IETF language tag for a human languag
Typecode
Summaryfalse
Comments

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
6. Subscription.text
Definition

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

Control0..1 This element is affected by the following invariants: dom-6
TypeNarrative
Summaryfalse
Alternate Namesnarrative, html, xhtml, display
Comments

Contained resources do not have a narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
7. Subscription.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

Control0..* This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5
TypeResource
Summaryfalse
Alternate Namesinline resources, anonymous resources, contained resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.

8. Subscription.extension
Definition

May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
9. Subscription.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
10. Subscription.identifier
Definition

A formal identifier that is used to identify this code system when it is represented in other formats, or referenced in a specification, model, design or an instance.

NoteThis is a business identifier, not a resource identifier (see discussion)
Control1..*
TypeIdentifier
Must Supporttrue
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
11. Subscription.name
Definition

A natural language name identifying the subscription.

Control0..1
Typestring
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
12. Subscription.status
Definition

The status of the subscription, which marks the server state for managing the subscription.

Control1..1
BindingThe codes SHALL be taken from SubscriptionStatusCodes The status of a subscription
Typecode
Is Modifiertrue
Must Supporttrue
Summarytrue
Comments

A client can only submit subscription resources in the requested or off state. Only the server can move a subscription from requested to active, and then to error. Either the server or the client can turn a subscription off.

This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
13. Subscription.topic
Definition

The reference to the subscription topic to be notified about.

Control1..1
Typecanonical(RTLSSubscriptionTopic)
Must Supporttrue
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
14. Subscription.contact
Definition

Contact details for a human to contact about the subscription. The primary use of this for system administrator troubleshooting.

Control0..*
TypeContactPoint
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
15. Subscription.end
Definition

The time for the server to turn the subscription off.

Control0..1
Typeinstant
Summarytrue
Comments

The server is permitted to deviate from this time but should observe it.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
16. Subscription.managingEntity
Definition

Entity with authorization to make subsequent revisions to the Subscription and also determines what data the subscription is authorized to disclose.

Control0..1
TypeReference(CareTeam|HealthcareService|Organization|RelatedPerson|Patient|Practitioner|PractitionerRole)
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
17. Subscription.reason
Definition

A description of why this subscription is defined.

Control0..1
Typestring
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
18. Subscription.filterBy
Definition

The filter properties to be applied to narrow the subscription topic stream. When multiple filters are applied, evaluates to true if all the conditions applicable to that resource are met; otherwise it returns false (i.e., logical AND).

Control0..*
TypeBackboneElement
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
scr-1: Subscription filters may only contain a modifier or a comparator (: (comparator.exists() and modifier.exists()).not())
19. Subscription.filterBy.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1 This element is affected by the following invariants: ele-1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
20. Subscription.filterBy.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
21. Subscription.filterBy.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
22. Subscription.filterBy.resourceType
Definition

A resource listed in the SubscriptionTopic this Subscription references (SubscriptionTopic.canFilterBy.resource). This element can be used to differentiate filters for topics that include more than one resource type.

Control0..1
BindingThe codes SHALL be taken from SubscriptionTypes; other codes may be used where these codes are not suitable A type of resource, or a Reference (from all versions
Typeuri
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
23. Subscription.filterBy.filterParameter
Definition

The filter as defined in the SubscriptionTopic.canFilterBy.filterParameter element.

Control1..1
Typestring
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
24. Subscription.filterBy.comparator
Definition

Comparator applied to this filter parameter.

Control0..1 This element is affected by the following invariants: scr-1
BindingThe codes SHALL be taken from SearchComparator Search Comparator Codes applied to this filter
Typecode
Summaryfalse
Comments

Must be a comparator allowed by the SubscriptionTopic relevant to this Subscription filter.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
25. Subscription.filterBy.modifier
Definition

Modifier applied to this filter parameter.

Control0..1 This element is affected by the following invariants: scr-1
BindingThe codes SHALL be taken from SearchModifierCode Search Modifier Code applied to this filter
Typecode
Summaryfalse
Comments

Must be a modifier allowed by the SubscriptionTopic relevant to this Subscription filter.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
26. Subscription.filterBy.value
Definition

The literal value or resource path as is legal in search - for example, Patient/123 or le1950.

Control1..1
Typestring
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
27. Subscription.channelType
Definition

The type of channel to send notifications on.

Control1..1
BindingThe codes SHALL be taken from SubscriptionChannelType; other codes may be used where these codes are not suitable The type of method used to execute a subscription
TypeCoding
Must Supporttrue
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
28. Subscription.endpoint
Definition

The url that describes the actual end-point to send notifications to.

Control0..1
Typeurl
Must Supporttrue
Summarytrue
Comments

For rest-hook the end-point must be an http: or https: URL; for websockets, ws: or wss:; for email, a mailto: url; and for message the endpoint can be in any form of url the server understands (usually, http/s: or mllp:). The URI is allowed to be relative; in which case, it is relative to the server end-point (since there may be more than one, clients should avoid using relative URIs).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
29. Subscription.parameter
Definition

Channel-dependent information to send as part of the notification (e.g., HTTP Headers).

Control0..*
TypeBackboneElement
Summaryfalse
Comments

Exactly what these mean depend on the channel type. They can convey additional information to the server or recipient and/or meet security requirements; for example, support of multiple headers in the outgoing notifications for rest-hook type subscriptions. Note that names are not required to be unique, but channel definitions can impose restrictions.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
30. Subscription.parameter.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1 This element is affected by the following invariants: ele-1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
31. Subscription.parameter.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
32. Subscription.parameter.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
33. Subscription.parameter.name
Definition

Parameter name for information passed to the channel for notifications, for example in the case of a REST hook wanting to pass through an authorization header, the name would be Authorization.

Control1..1
Typestring
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
34. Subscription.parameter.value
Definition

Parameter value for information passed to the channel for notifications, for example in the case of a REST hook wanting to pass through an authorization header, the value would be Bearer 0193....

Control1..1
Typestring
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
35. Subscription.heartbeatPeriod
Definition

If present, a 'heartbeat' notification (keep-alive) is sent via this channel with an interval period equal to this elements integer value in seconds. If not present, a heartbeat notification is not sent.

Control0..1
TypeunsignedInt
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
36. Subscription.timeout
Definition

If present, the maximum amount of time a server will allow before failing a notification attempt.

Control0..1
TypeunsignedInt
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
37. Subscription.contentType
Definition

The MIME type to send the payload in - e.g., application/fhir+xml or application/fhir+json. Note that:

  • clients may request notifications in a specific FHIR version by using the FHIR Version Parameter - e.g., application/fhir+json; fhirVersion=4.0.

  • additional MIME types can be allowed by channels - e.g., text/plain and text/html are defined by the Email channel.

Control0..1
BindingThe codes SHALL be taken from MimeTypes BCP 13 (RFCs 2045, 2046, 2047, 4288, 4289 and 2049
Typecode
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
38. Subscription.content
Definition

How much of the resource content to deliver in the notification payload. The choices are an empty payload, only the resource id, or the full resource content.

Control0..1
BindingThe codes SHALL be taken from SubscriptionPayloadContent Codes to represent how much resource content to send in the notification payload
Typecode
Summarytrue
Comments

Sending the payload has obvious security implications. The server is responsible for ensuring that the content is appropriately secured.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
39. Subscription.maxCount
Definition

If present, the maximum number of events that will be included in a notification bundle. Note that this is not a strict limit on the number of entries in a bundle, as dependent resources can be included.

Control0..1
TypepositiveInt
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))