Generated Narrative: CodeSystem ASN1ToHL7 Profile: Shareable CodeSystem Properties This code system defines the following properties for its concepts Name Code URI Type Description Event or State eventOrState http://terminology.hl7.org/CodeSystem/ASN1ToHL7#eventOrState code The code type is an event or state Source source http://terminology.hl7.org/CodeSystem/ASN1ToHL7#source code The code originates from a measurement or an attribute that further describes a measurement or the sensor device. MDC Code MDCCode http://terminology.hl7.org/CodeSystem/ASN1ToHL7#MDCCode Coding The decimal code for the MDC code of the bits observation Concepts This case-sensitive code system http://terminology.hl7.org/CodeSystem/ASN1ToHL7 defines the following codes: Code Display Definition Event or State Source MDC Code source Source The source of the bit eventOrState Event or State Whether the bit represents an event or a state device Attribute The bit represents a device attribute measurement Measurement The bit represents a measurement attribute event Event The bit represents an event state State The bit represents a state MDCCode MDC Code The MDC code for the bit 67925.0 onMains The device is on mains power state device 67925 67925.1 onBattery The device is on Battery power state device 67925 67925.8 chargingFull The device battery is charging at maximum rate event device 67925 67925.9 chargingTrickle The device battery is charging at a trickle rate event device 67925 67925.10 chargingOff The device battery charging is on state device 67925 532354.0 negated-regulation-status Device is regulated when cleared and unregulated when set state device 532354 68219.0 mds-time-capab-real-time-clock Real time clock is supported event device 68219 68219.1 mds-time-capab-set-clock Support for the PHG to set the time event device 68219 68219.2 mds-time-capab-relative-time Relative Time is supported event device 68219 68219.3 mds-time-capab-high-res-relative-time Hi-Res Relative Time is supported event device 68219 68219.4 mds-time-capab-sync-abs-time Syncing the absolute time is supported event device 68219 68219.5 mds-time-capab-sync-rel-time Syncing the relative time is supported event device 68219 68219.6 mds-time-capab-sync-hi-res-relative-time Syncing hi-res relative time is supported event device 68219 68219.7 mds-time-capab-bo-time The real-time clock supports base offset time event device 68219 68219.8 mds-time-state-abs-time-synced The absolute time has been synced event device 68219 68219.9 mds-time-state-rel-time-synced The relative time has been synced event device 68219 68219.10 mds-time-state-hi-res-relative-time-synced The hi-res time has been synced event device 68219 68219.11 mds-time-mgr-set-time PHG Requested to set the time event device 68219 68219.12 mds-time-capab-sync-bo-time Syncing base-offset time is supported event device 68219 68219.13 mds-time-state-bo-time-synced Base-offset time has been synced event device 68219 68219.14 mds-time-state-bo-time-UTC-aligned Base-offset time is aligned with UTC time standard event device 68219 68219.15 mds-time-dst-rules-enabled Support for daylight savings time rules event device 68219 67846.0 lim-alert-off Both the high and the low limit alerts are disabled state measurement 67846 67846.1 lim-low-off The low limit alert is disabled state measurement 67846 67846.2 lim-high-off The high limit alert is disabled state measurement 67846 150604.0 sensor-disconnected The device is not connected with the sensor event measurement 150604 150604.1 sensor-malfunction The sensor has malfunctioned event measurement 150604 150604.2 sensor-displaced The sensor is not correctly placed on the user event measurement 150604 150604.3 sensor-unsupported The sensor connected to the device is unsupported event measurement 150604 150604.4 sensor-off The sensor is not connected to the user event measurement 150604 150604.5 sensor-interference The sensor is experiencing interference event measurement 150604 150604.6 signal-searching The sensor is searching for a signal event measurement 150604 150604.7 signal-pulse-questionable A questionable pulse has been detected event measurement 150604 150604.8 signal-non-pulsatile A non pulsatile signal has been detected event measurement 150604 150604.9 signal-erratic A signal has been discovered, but it is erratic event measurement 150604 150604.10 signal-low-perfusion The signal is experiencing low perfusion event measurement 150604 150604.11 signal-poor The signal has been discovered, but it is poor event measurement 150604 150604.12 signal-inadequate The signal has been discovered, but it is inadequate event measurement 150604 150604.13 signal-processing-irregularity The signal has been discovered, but is experiencing processing irregularity event measurement 150604 150604.14 device-equipment-malfunction A device malfunction has occurred event measurement 150604 150604.15 device-extended-update An extended display update is in progress on device event measurement 150604 150605.0 pulse-qual-nominal No abnormalities have been detected by the sensor event measurement 150605 150605.1 pulse-qual-marginal The pulse quality is marginal event measurement 150605 150605.2 pulse-qual-minimal The pulse quality is minimal event measurement 150605 150605.3 pulse-qual-unacceptable The pulse quality is unacceptable event measurement 150605 8410584.0 leadwire-loss Loss of unspecified lead wire or electrode connection event measurement 8410584 8410584.1 leadsignal-loss Loss of unspecified lead signal event measurement 8410584 8410584.2 leadwire-loss-first-lead Loss of 1st lead wire or electrode connection event measurement 8410584 8410584.3 leadsignal-loss-first-lead Loss of 1st lead signal event measurement 8410584 8410584.4 leadwire-loss-second-lead Loss of 2nd lead wire or electrode connection event measurement 8410584 8410584.5 leadsignal-loss-second-lead Loss of 2nd lead signal event measurement 8410584 8410584.6 leadwire-loss-third-lead Loss of 3rd lead wire or electrode connection event measurement 8410584 8410584.7 leadsignal-loss-third-lead Loss of 3rd lead signal event measurement 8410584 8417752.0 device-battery-low The device battery is low event measurement 8417752 8417752.1 sensor-malfunction The sensor has malfunctioned event measurement 8417752 8417752.2 sensor-sample-size-insufficient The sensor's sample size is insufficient event measurement 8417752 8417752.3 sensor-strip-insertion The test strip was inserted incorrectly event measurement 8417752 8417752.4 sensor-strip-type-incorrect The test strip type is incompatible with the sensor event measurement 8417752 8417752.5 sensor-result-too-high The value reported by the sensor is too high event measurement 8417752 8417752.6 sensor-result-too-low The value reported by the sensor is too low event measurement 8417752 8417752.7 sensor-temp-too-high The temperature is too high event measurement 8417752 8417752.8 sensor-temp-too-low The temperature is too low event measurement 8417752 8417752.9 sensor-read-interrupt The read process was interrupted event measurement 8417752 8417752.10 device-gen-fault General Device Fault event measurement 8417752 8417752.11 sensor-temp-out-of-range The temperature is out of range event measurement 8417752 8417909.0 inr-device-battery-low The INR device battery is low event measurement 8417909 8417909.1 inr-sensor-malfunction The INR device sensor has malfunctioned event measurement 8417909 8417909.2 inr-sensor-sample-size-insufficient The sample size was insufficient event measurement 8417909 8417909.3 inr-sensor-strip-insertion The test script was inserted incorrectly event measurement 8417909 8417909.4 inr-sensor-strip-type-incorrect The test strip used is not compatible with the INR event measurement 8417909 8417909.5 inr-sensor-result-too-high The test result is too high event measurement 8417909 8417909.6 inr-sensor-result-too-low The test result is too low event measurement 8417909 8417909.7 inr-sensor-temp-too-high The temperature is too high event measurement 8417909 8417909.8 inr-sensor-temp-too-low The temperature is too low event measurement 8417909 8417909.9 inr-sensor-read-interrupt The read process was interrupted event measurement 8417909 8417909.10 inr-device-gen-fault General device fault event measurement 8417909 8417909.11 inr-sensor-calibration-due The INR sensor calibration is due event measurement 8417909 8408608.0 device-status-undetermined Undetermined device status event event measurement 8408608 8408608.1 device-status-reset Device reset event measurement 8408608 8408608.5 device-status-error Device error event measurement 8408608 8408608.6 device-status-error-mechanical Mechanical error event measurement 8408608 8408608.7 device-status-error-electronic Electronic error event measurement 8408608 8408608.8 device-status-error-software Software error event measurement 8408608 8408608.9 device-status-error-battery Battery error event measurement 8408608 8408608.15 device-status-service Undetermined device status event, service needed event measurement 8408608 8408608.16 device-status-service-time-sync-required Time sync service required event measurement 8408608 8408608.17 device-status-service-calibration-required Calibration required event measurement 8408608 8408608.18 device-status-service-replenishment-required Replenishment required event measurement 8408608 8408608.25 device-status-battery-low Battery power is too low event measurement 8408608 8408608.26 device-status-battery-depleted Battery is depleted event measurement 8408608 8408608.27 device-status-battery-replaced Battery has been replaced event measurement 8408608 8408608.28 device-status-battery-interrupted Battery was interrupted event measurement 8408608 8418060.0 sensor-session-stopped Session stopped event measurement 8418060 8418060.2 sensor-type-incorrect Sensor type incorrect for device event measurement 8418060 8418060.3 sensor-malfunction The sensor malfunctioned event measurement 8418060 8418060.4 device-specific-alert Device specific alert event measurement 8418060 8418060.7 sensor-calibration-not-allowed Calibrating the sensor is not allowed event measurement 8418060 8418060.8 sensor-calibration-recommended Calibrating the sensor is recommended event measurement 8418060 8418060.9 sensor-calibration-required Calibrating the sensor is required event measurement 8418060 8418060.10 sensor-temp-too-high Temperature is too high for a valid result event measurement 8418060 8418060.11 sensor-temp-too-low Temperature is too low for a valid result event measurement 8418060 8418060.12 sensor-result-below-patient-low Sensor result below the Patient Low level event measurement 8418060 8418060.13 sensor-result-above-patient-high Sensor result above the Patient High level event measurement 8418060 8418060.14 sensor-low-hypo Sensor result below level event measurement 8418060 8418060.15 sensor-high-hyper Sensor result above level event measurement 8418060 8418060.16 sensor-rate-decrease-exceeded The sensor rate of decrease has been exceeded event measurement 8418060 8418060.17 sensor-rate-increase-exceeded The sensor rate of increase has been exceeded event measurement 8418060 8418060.18 sensor-result-too-low Sensor result is lower than the device can process event measurement 8418060 8418060.19 sensor-result-too-high Sensor result is higher than the device can process event measurement 8418060 8418060.20 sensor-com-out-of-range The sensor communication is out of range event measurement 8418060 8418512.0 Battery-status-Undetermined The status of the battery is unknown state measurement 8418512 8418512.1 Battery-absent The battery is absent state measurement 8418512 8418512.2 Battery-active The battery is active in the system state measurement 8418512 8418512.3 Battery-charging The battery is charging state measurement 8418512 8418512.4 Battery-fullyCharged The battery is fully charged state measurement 8418512 8418512.5 Battery-disposable The battery is disposable state measurement 8418512 8418512.6 Battery-rechargeable The battery is rechargeable state measurement 8418512 8418512.7 Battery-overTemperature The battery is too hot event measurement 8418512 8418512.8 Battery-faulty The battery is faulty event measurement 8418512 8418512.9 Battery-incompatible The battery is incompatible event measurement 8418512 8410608.0 body-movement Too much body movement event measurement 8410608 8410608.1 cuff-too-loose The cuff was too loose event measurement 8410608 8410608.2 irregular-pulse An irregular pulse was detected event measurement 8410608 8410608.3 pulse-over-range-limit The pulse was too high for sensor to work event measurement 8410608 8410608.4 pulse-under-range-limit The pulse was too low for sensor to work event measurement 8410608 8410608.5 improper-body-position The cuff was incorrectly placed with respect to the heart event measurement 8410608
CodeSystem for mapping IEEE 11073-10206 bitstrings to FHIR Codeable Concepts
The code originates from a measurement or an attribute that further describes a measurement or the sensor device.
The decimal code for the MDC code of the bits observation
Whether the bit represents an event or a state
The bit represents a measurement attribute
The device battery is charging at maximum rate
The device battery is charging at a trickle rate
Device is regulated when *cleared* and unregulated when *set*
Syncing hi-res relative time is supported
The real-time clock supports base offset time
Base-offset time is aligned with UTC time standard
Both the high and the low limit alerts are disabled
The device is not connected with the sensor
The sensor is not correctly placed on the user
The sensor connected to the device is unsupported
A non pulsatile signal has been detected
A signal has been discovered, but it is erratic
The signal is experiencing low perfusion
The signal has been discovered, but it is poor
The signal has been discovered, but it is inadequate
The signal has been discovered, but is experiencing processing irregularity
An extended display update is in progress on device
No abnormalities have been detected by the sensor
Loss of unspecified lead wire or electrode connection
Loss of 1st lead wire or electrode connection
Loss of 2nd lead wire or electrode connection
Loss of 3rd lead wire or electrode connection
The sensor's sample size is insufficient
The test strip type is incompatible with the sensor
The value reported by the sensor is too high
The value reported by the sensor is too low
The test script was inserted incorrectly
The test strip used is not compatible with the INR
Undetermined device status event, service needed
Temperature is too high for a valid result
Temperature is too low for a valid result
Sensor result below the Patient Low level
Sensor result above the Patient High level
The sensor rate of decrease has been exceeded
The sensor rate of increase has been exceeded
Sensor result is lower than the device can process
Sensor result is higher than the device can process
The sensor communication is out of range
The pulse was too high for sensor to work
The pulse was too low for sensor to work
The cuff was incorrectly placed with respect to the heart