This page is part of the Personal Health Device FHIR IG (v1.1.0: STU 1) based on FHIR (HL7® FHIR® Standard) R4. This is the current published version in its permanent home (it will always be available at this URL). For a full list of available versions, see the Directory of published versions

Non IEEE 11073-20601 Devices

Not all Continua PHDs are based upon the 11073-20601 standard. Continua also supports Bluetooth Low Energy devices that follow the various Bluetooth Low Energy health device profiles and services. However, Continua requires that the information provided by the device can be mapped to IEEE 11073-20601 MDS and Metric objects by the PHG as specified in the transcoding white paper (the various versions can be found here) if the measurements are going to be propagated downstream by Continua transactions. The requirement does not mandate that the PHG actually create these objects, but the resulting downstream messages have to be composed as if they had come from a compliant IEEE 11073-20601 device supporting the same type of measurement.

The transcoding requirements put further demands on the Bluetooth Low Energy device over and above that specified in the Bluetooth Low Energy health profile specifications. For example, the Bluetooth Low Energy Health Thermometer Profile does not require that a thermometer is able to report its sense of current time even though it is required to report time stamps in the measurements. Continua requires that all measurements that have time stamps also be able to report their sense of current time. The reason is that PHDs often have unreliable time clocks that the PHG can correct if the PHG is able to obtain the PHD's sense of current time.

In addition to Continua Bluetooth Low Energy PHDs, there are numerous proprietary medical devices on the market. It may be possible to map the measurements coming from these devices to the PHD profiles, but that mapping would require that the resulting downstream resources be created and populated as if they had come from a compliant IEEE 11073-20601 device. The writers of this guide have performed this task for a number of proprietary Serial Port Protocol (SPP) and Bluetooth Low Energy devices.

In this Implementation Guide, the PHD is treated as a IEEE 11073-20601 compliant device. When working with other device types, it is the responsibility of the FHIR encoder to 'virtually' map the data from the non-IEEE 11073-20601 device to the IEEE 11073-20601 model before generating the PHD FHIR resources.

In general, if a PHD provides timestamps with its measurements, it needs to provide a means for the PHG to get its sense of current time. If it does, one can likely use this implementation guide with that device.

• Next: Profiles
• Previous: Coincident Time Stamp