International Patient Summary Implementation Guide
2.0.0-ballot - STU 2 Ballot International flag

This page is part of the International Patient Summary Implementation Guide (v2.0.0-ballot: STU 2 Ballot 1) based on FHIR (HL7® FHIR® Standard) R4. The current version which supersedes this version is 1.1.0. For a full list of available versions, see the Directory of published versions

Resource Profile: BundleUvIps - Detailed Descriptions

Page standards status: Trial-use Maturity Level: 2

Definitions for the Bundle-uv-ips resource profile.

Guidance on how to interpret the contents of this table can be found here

0. Bundle
Definition

International Patient Summary Bundle. A container for a collection of resources in the patient summary document.

ShortInternational Patient Summary Bundle
Invariantsbdl-ips-1: An IPS document must have no additional Composition (including Composition subclass) resources besides the first. (entry.tail().where(resource is Composition).empty())
2. Bundle.identifier
NoteThis is a business identifier, not a resource identifier (see discussion)
Control1..?
Must Supporttrue
4. Bundle.type
Fixed Valuedocument
6. Bundle.timestamp
Control1..?
Must Supporttrue
8. Bundle.entry
Definition

An entry resource included in the patient summary document bundle resource.

ShortEntry resource in the patient summary bundle
Comments

Must contain the IPS Composition as the first entry (only a single Composition resource instance may be included) and a Patient resource. Additional constraints are specified in the IPS Composition profile.

Control2..?
Must Supporttrue
SlicingThis element introduces a set of slices on Bundle.entry. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • type @ resource
  • profile @ resource
  • 10. Bundle.entry.fullUrl
    Control1..?
    Must Supporttrue
    12. Bundle.entry.search
    Control0..0
    14. Bundle.entry.request
    Control0..0
    16. Bundle.entry.response
    Control0..0
    18. Bundle.entry:composition
    Slice Namecomposition
    Control1..1
    20. Bundle.entry:composition.resource
    Control1..?
    TypeComposition(Composition (IPS))
    22. Bundle.entry:patient
    Slice Namepatient
    Control1..1
    24. Bundle.entry:patient.resource
    Control1..?
    TypePatient(Patient (IPS))
    26. Bundle.entry:allergyintolerance
    Slice Nameallergyintolerance
    Control0..*
    28. Bundle.entry:allergyintolerance.resource
    Control1..?
    TypeAllergyIntolerance(Allergy Intolerance (IPS))
    30. Bundle.entry:condition
    Slice Namecondition
    Control0..*
    32. Bundle.entry:condition.resource
    Control1..?
    TypeCondition(Condition (IPS))
    34. Bundle.entry:device
    Slice Namedevice
    Control0..*
    36. Bundle.entry:device.resource
    Control1..?
    TypeDevice
    38. Bundle.entry:deviceusestatement
    Slice Namedeviceusestatement
    Control0..*
    40. Bundle.entry:deviceusestatement.resource
    Control1..?
    TypeDeviceUseStatement(Device Use Statement (IPS))
    42. Bundle.entry:diagnosticreport
    Slice Namediagnosticreport
    Control0..*
    44. Bundle.entry:diagnosticreport.resource
    Control1..?
    TypeDiagnosticReport(DiagnosticReport (IPS))
    46. Bundle.entry:imagingstudy
    Slice Nameimagingstudy
    Control0..*
    48. Bundle.entry:imagingstudy.resource
    Control1..?
    TypeImagingStudy(Imaging Study (IPS))
    50. Bundle.entry:immunization
    Slice Nameimmunization
    Control0..*
    52. Bundle.entry:immunization.resource
    Control1..?
    TypeImmunization(Immunization (IPS))
    54. Bundle.entry:medication
    Slice Namemedication
    Control0..*
    56. Bundle.entry:medication.resource
    Control1..?
    TypeMedication(Medication (IPS))
    58. Bundle.entry:medicationrequest
    Slice Namemedicationrequest
    Control0..*
    60. Bundle.entry:medicationrequest.resource
    Control1..?
    TypeMedicationRequest(Medication Request (IPS))
    62. Bundle.entry:medicationstatement
    Slice Namemedicationstatement
    Control0..*
    64. Bundle.entry:medicationstatement.resource
    Control1..?
    TypeMedicationStatement(Medication Statement (IPS))
    66. Bundle.entry:practitioner
    Slice Namepractitioner
    Control0..*
    68. Bundle.entry:practitioner.resource
    Control1..?
    TypePractitioner(Practitioner (IPS))
    70. Bundle.entry:practitionerrole
    Slice Namepractitionerrole
    Control0..*
    72. Bundle.entry:practitionerrole.resource
    Control1..?
    TypePractitionerRole(PractitionerRole (IPS))
    74. Bundle.entry:procedure
    Slice Nameprocedure
    Control0..*
    76. Bundle.entry:procedure.resource
    Control1..?
    TypeProcedure(Procedure (IPS))
    78. Bundle.entry:organization
    Slice Nameorganization
    Control0..*
    80. Bundle.entry:organization.resource
    Control1..?
    TypeOrganization(Organization (IPS))
    82. Bundle.entry:observation-pregnancy-edd
    Slice Nameobservation-pregnancy-edd
    Control0..*
    84. Bundle.entry:observation-pregnancy-edd.resource
    Control1..?
    TypeObservation(Observation - Pregnancy: EDD)
    86. Bundle.entry:observation-pregnancy-outcome
    Slice Nameobservation-pregnancy-outcome
    Control0..*
    88. Bundle.entry:observation-pregnancy-outcome.resource
    Control1..?
    TypeObservation(Observation - Pregnancy: outcome)
    90. Bundle.entry:observation-pregnancy-status
    Slice Nameobservation-pregnancy-status
    Control0..*
    92. Bundle.entry:observation-pregnancy-status.resource
    Control1..?
    TypeObservation(Observation - Pregnancy: status)
    94. Bundle.entry:observation-alcohol-use
    Slice Nameobservation-alcohol-use
    Control0..*
    96. Bundle.entry:observation-alcohol-use.resource
    Control1..?
    TypeObservation(Observation - SH: alcohol use)
    98. Bundle.entry:observation-tobacco-use
    Slice Nameobservation-tobacco-use
    Control0..*
    100. Bundle.entry:observation-tobacco-use.resource
    Control1..?
    TypeObservation(Observation - SH: tobacco use)
    102. Bundle.entry:observation-results-laboratory-pathology
    Slice Nameobservation-results-laboratory-pathology
    Control0..*
    104. Bundle.entry:observation-results-laboratory-pathology.resource
    Control1..?
    TypeObservation(Observation Results: laboratory/pathology (IPS))
    106. Bundle.entry:observation-results-radiology
    Slice Nameobservation-results-radiology
    Control0..*
    108. Bundle.entry:observation-results-radiology.resource
    Control1..?
    TypeObservation(Observation Results: radiology (IPS))
    110. Bundle.entry:observation-vital-signs
    Slice Nameobservation-vital-signs
    Control0..*
    112. Bundle.entry:observation-vital-signs.resource
    Control1..?
    TypeObservation(Vital Signs Profile)
    114. Bundle.entry:specimen
    Slice Namespecimen
    Control0..*
    116. Bundle.entry:specimen.resource
    Control1..?
    TypeSpecimen(Specimen (IPS))
    118. Bundle.entry:flag
    Slice Nameflag
    Control0..*
    120. Bundle.entry:flag.resource
    Control1..?
    TypeFlag(Flag - Alert (IPS))
    122. Bundle.entry:clinicalimpression
    Slice Nameclinicalimpression
    Control0..*
    124. Bundle.entry:clinicalimpression.resource
    Control1..?
    TypeClinicalImpression
    126. Bundle.entry:careplan
    Slice Namecareplan
    Control0..*
    128. Bundle.entry:careplan.resource
    Control1..?
    TypeCarePlan
    130. Bundle.entry:consent
    Slice Nameconsent
    Control0..*
    132. Bundle.entry:consent.resource
    Control1..?
    TypeConsent
    134. Bundle.entry:documentreference
    Slice Namedocumentreference
    Control0..*
    136. Bundle.entry:documentreference.resource
    Control1..?
    TypeDocumentReference

    Guidance on how to interpret the contents of this table can be found here

    0. Bundle
    Definition

    International Patient Summary Bundle. A container for a collection of resources in the patient summary document.


    A container for a collection of resources.

    ShortInternational Patient Summary BundleContains a collection of resources
    Control0..*
    Is Modifierfalse
    Summaryfalse
    Invariantsbdl-1: total only when a search or history (total.empty() or (type = 'searchset') or (type = 'history'))
    bdl-2: entry.search only when a search (entry.search.empty() or (type = 'searchset'))
    bdl-3: entry.request mandatory for batch/transaction/history, otherwise prohibited (entry.all(request.exists() = (%resource.type = 'batch' or %resource.type = 'transaction' or %resource.type = 'history')))
    bdl-4: entry.response mandatory for batch-response/transaction-response/history, otherwise prohibited (entry.all(response.exists() = (%resource.type = 'batch-response' or %resource.type = 'transaction-response' or %resource.type = 'history')))
    bdl-7: FullUrl must be unique in a bundle, or else entries with the same fullUrl must have different meta.versionId (except in history bundles) ((type = 'history') or entry.where(fullUrl.exists()).select(fullUrl&resource.meta.versionId).isDistinct())
    bdl-9: A document must have an identifier with a system and a value (type = 'document' implies (identifier.system.exists() and identifier.value.exists()))
    bdl-10: A document must have a date (type = 'document' implies (timestamp.hasValue()))
    bdl-11: A document must have a Composition as the first resource (type = 'document' implies entry.first().resource.is(Composition))
    bdl-12: A message must have a MessageHeader as the first resource (type = 'message' implies entry.first().resource.is(MessageHeader))
    bdl-ips-1: An IPS document must have no additional Composition (including Composition subclass) resources besides the first. (entry.tail().where(resource is Composition).empty())
    bdl-1: total only when a search or history (total.empty() or (type = 'searchset') or (type = 'history'))
    bdl-2: entry.search only when a search (entry.search.empty() or (type = 'searchset'))
    bdl-3: entry.request mandatory for batch/transaction/history, otherwise prohibited (entry.all(request.exists() = (%resource.type = 'batch' or %resource.type = 'transaction' or %resource.type = 'history')))
    bdl-4: entry.response mandatory for batch-response/transaction-response/history, otherwise prohibited (entry.all(response.exists() = (%resource.type = 'batch-response' or %resource.type = 'transaction-response' or %resource.type = 'history')))
    bdl-7: FullUrl must be unique in a bundle, or else entries with the same fullUrl must have different meta.versionId (except in history bundles) ((type = 'history') or entry.where(fullUrl.exists()).select(fullUrl&resource.meta.versionId).isDistinct())
    bdl-9: A document must have an identifier with a system and a value (type = 'document' implies (identifier.system.exists() and identifier.value.exists()))
    bdl-10: A document must have a date (type = 'document' implies (timestamp.hasValue()))
    bdl-11: A document must have a Composition as the first resource (type = 'document' implies entry.first().resource.is(Composition))
    bdl-12: A message must have a MessageHeader as the first resource (type = 'message' implies entry.first().resource.is(MessageHeader))
    2. Bundle.implicitRules
    Definition

    A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

    ShortA set of rules under which this content was created
    Comments

    Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

    Control0..1
    Typeuri
    Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    4. Bundle.identifier
    Definition

    A persistent identifier for the bundle that won't change as a bundle is copied from server to server.

    ShortPersistent identifier for the bundle
    Comments

    Persistent identity generally only matters for batches of type Document, Message, and Collection. It would not normally be populated for search and history results and servers ignore Bundle.identifier when processing batches and transactions. For Documents the .identifier SHALL be populated such that the .identifier is globally unique.

    NoteThis is a business identifier, not a resource identifier (see discussion)
    Control10..1
    TypeIdentifier
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    6. Bundle.type
    Definition

    Indicates the purpose of this bundle - how it is intended to be used.

    Shortdocument | message | transaction | transaction-response | batch | batch-response | history | searchset | collection
    Comments

    It's possible to use a bundle for other purposes (e.g. a document can be accepted as a transaction). This is primarily defined so that there can be specific rules for some of the bundle types.

    Control1..1
    BindingThe codes SHALL be taken from BundleTypehttp://hl7.org/fhir/ValueSet/bundle-type|4.0.1
    (required to http://hl7.org/fhir/ValueSet/bundle-type|4.0.1)

    Indicates the purpose of a bundle - how it is intended to be used.

    Typecode
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Fixed Valuedocument
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    8. Bundle.timestamp
    Definition

    The date/time that the bundle was assembled - i.e. when the resources were placed in the bundle.

    ShortWhen the bundle was assembled
    Comments

    For many bundles, the timestamp is equal to .meta.lastUpdated, because they are not stored (e.g. search results). When a bundle is placed in a persistent store, .meta.lastUpdated will be usually be changed by the server. When the bundle is a message, a middleware agent altering the message (even if not stored) SHOULD update .meta.lastUpdated. .timestamp is used to track the original time of the Bundle, and SHOULD be populated.

    Usage:

    • document : the date the document was created. Note: the composition may predate the document, or be associated with multiple documents. The date of the composition - the authoring time - may be earlier than the document assembly time
    • message : the date that the content of the message was assembled. This date is not changed by middleware engines unless they add additional data that changes the meaning of the time of the message
    • history : the date that the history was assembled. This time would be used as the _since time to ask for subsequent updates
    • searchset : the time that the search set was assembled. Note that different pages MAY have different timestamps but need not. Having different timestamps does not imply that subsequent pages will represent or include changes made since the initial query
    • transaction | transaction-response | batch | batch-response | collection : no particular assigned meaning

    The timestamp value should be greater than the lastUpdated and other timestamps in the resources in the bundle, and it should be equal or earlier than the .meta.lastUpdated on the Bundle itself.

    Control10..1
    Typeinstant
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    10. Bundle.entry
    Definition

    An entry resource included in the patient summary document bundle resource.


    An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

    ShortEntry resource in the patient summary bundleEntry in the bundle - will have a resource or information
    Comments

    Must contain the IPS Composition as the first entry (only a single Composition resource instance may be included) and a Patient resource. Additional constraints are specified in the IPS Composition profile.

    Control20..*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    SlicingThis element introduces a set of slices on Bundle.entry. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • type @ resource
    • profile @ resource
    • 12. Bundle.entry.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      14. Bundle.entry.fullUrl
      Definition

      The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

      • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
      • Results from operations might involve resources that are not identified.
      ShortURI for resource (Absolute URL server address or URI for UUID/OID)
      Comments

      fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

      Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

      Control10..1
      Typeuri
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      16. Bundle.entry.search
      Definition

      Information about the search process that lead to the creation of this entry.

      ShortSearch related information
      Control0..01
      This element is affected by the following invariants: bdl-2
      TypeBackboneElement
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      19. Bundle.entry.request
      Definition

      Additional information about how this entry should be processed as part of a transaction or batch. For history, it shows how the entry was processed to create the version contained in the entry.

      ShortAdditional execution information (transaction/batch/history)
      Control0..01
      This element is affected by the following invariants: bdl-3
      TypeBackboneElement
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      24. Bundle.entry.response
      Definition

      Indicates the results of processing the corresponding 'request' entry in the batch or transaction being responded to or what the results of an operation where when returning history.

      ShortResults of execution (transaction/batch/history)
      Control0..01
      This element is affected by the following invariants: bdl-4
      TypeBackboneElement
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      28. Bundle.entry:composition
      Slice Namecomposition
      Definition

      An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

      ShortEntry in the bundle - will have a resource or information
      Control10..1*
      TypeBackboneElement
      Is Modifierfalse
      Summarytrue
      Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      30. Bundle.entry:composition.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      32. Bundle.entry:composition.resource
      Definition

      International Patient Summary composition. A composition is a set of healthcare-related information that is assembled together into a single logical document that provides a single coherent statement of meaning, establishes its own context and that has clinical attestation with regard to who is making the statement. While a Composition defines the structure, it does not actually contain the content: rather the full content of a document is contained in a Bundle, of which the Composition is the first resource contained.


      The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

      ShortInternational Patient Summary compositionA resource in the bundle
      Comments

      While the focus of this specification is on patient-specific clinical statements, this resource can also apply to other healthcare-related statements such as study protocol designs, healthcare invoices and other activities that are not necessarily patient-specific or clinical.

      Control10..1
      TypeCompositionResource(Composition (IPS))
      Is Modifierfalse
      Summaryfalse
      34. Bundle.entry:patient
      Slice Namepatient
      Definition

      An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

      ShortEntry in the bundle - will have a resource or information
      Control10..1*
      TypeBackboneElement
      Is Modifierfalse
      Summarytrue
      Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      36. Bundle.entry:patient.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      38. Bundle.entry:patient.resource
      Definition

      Demographics and other administrative information about an individual or animal receiving care or other health-related services.


      The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

      ShortInformation about an individual or animal receiving health care servicesA resource in the bundle
      Control10..1
      TypePatientResource(Patient (IPS))
      Is Modifierfalse
      Summaryfalse
      Alternate NamesSubjectOfCare Client Resident
      40. Bundle.entry:allergyintolerance
      Slice Nameallergyintolerance
      Definition

      An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

      ShortEntry in the bundle - will have a resource or information
      Control0..*
      TypeBackboneElement
      Is Modifierfalse
      Summarytrue
      Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      42. Bundle.entry:allergyintolerance.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      44. Bundle.entry:allergyintolerance.resource
      Definition

      Risk of harmful or undesirable, physiological response which is unique to an individual and associated with exposure to a substance.


      The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

      ShortAllergy or Intolerance (generally: Risk of adverse reaction to a substance)A resource in the bundle
      Comments

      Substances include, but are not limited to: a therapeutic substance administered correctly at an appropriate dosage for the individual; food; material derived from plants or animals; or venom from insect stings.

      Control10..1
      TypeAllergyIntoleranceResource(Allergy Intolerance (IPS))
      Is Modifierfalse
      Summaryfalse
      Alternate NamesAllergy, Intolerance, Adverse Reaction
      46. Bundle.entry:condition
      Slice Namecondition
      Definition

      An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

      ShortEntry in the bundle - will have a resource or information
      Control0..*
      TypeBackboneElement
      Is Modifierfalse
      Summarytrue
      Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      48. Bundle.entry:condition.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      50. Bundle.entry:condition.resource
      Definition

      A clinical condition, problem, diagnosis, or other event, situation, issue, or clinical concept that has risen to a level of concern.


      The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

      ShortDocumentation of a health problem of the patientA resource in the bundle
      Control10..1
      TypeConditionResource(Condition (IPS))
      Is Modifierfalse
      Summaryfalse
      52. Bundle.entry:device
      Slice Namedevice
      Definition

      An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

      ShortEntry in the bundle - will have a resource or information
      Control0..*
      TypeBackboneElement
      Is Modifierfalse
      Summarytrue
      Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      54. Bundle.entry:device.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      56. Bundle.entry:device.resource
      Definition

      The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

      ShortA resource in the bundle
      Control10..1
      TypeDeviceResource
      Is Modifierfalse
      Summarytrue
      58. Bundle.entry:deviceusestatement
      Slice Namedeviceusestatement
      Definition

      An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

      ShortEntry in the bundle - will have a resource or information
      Control0..*
      TypeBackboneElement
      Is Modifierfalse
      Summarytrue
      Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      60. Bundle.entry:deviceusestatement.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      62. Bundle.entry:deviceusestatement.resource
      Definition

      A record of a device being used by a patient where the record is the result of a report from the patient or another clinician.


      The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

      ShortRecord of use of a deviceA resource in the bundle
      Control10..1
      TypeDeviceUseStatementResource(Device Use Statement (IPS))
      Is Modifierfalse
      Summaryfalse
      64. Bundle.entry:diagnosticreport
      Slice Namediagnosticreport
      Definition

      An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

      ShortEntry in the bundle - will have a resource or information
      Control0..*
      TypeBackboneElement
      Is Modifierfalse
      Summarytrue
      Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      66. Bundle.entry:diagnosticreport.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      68. Bundle.entry:diagnosticreport.resource
      Definition

      The findings and interpretation of diagnostic tests performed on patients, groups of patients, devices, and locations, and/or specimens derived from these. The report includes clinical context such as requesting and provider information, and some mix of atomic results, images, textual and coded interpretations, and formatted representation of diagnostic reports.


      The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

      ShortA Diagnostic report - a combination of request information, atomic results, images, interpretation, as well as formatted reportsA resource in the bundle
      Comments

      This is intended to capture a single report and is not suitable for use in displaying summary information that covers multiple reports. For example, this resource has not been designed for laboratory cumulative reporting formats nor detailed structured reports for sequencing.

      Control10..1
      TypeDiagnosticReportResource(DiagnosticReport (IPS))
      Is Modifierfalse
      Summaryfalse
      Alternate NamesReport, Test, Result, Results, Labs, Laboratory
      70. Bundle.entry:imagingstudy
      Slice Nameimagingstudy
      Definition

      An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

      ShortEntry in the bundle - will have a resource or information
      Control0..*
      TypeBackboneElement
      Is Modifierfalse
      Summarytrue
      Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      72. Bundle.entry:imagingstudy.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      74. Bundle.entry:imagingstudy.resource
      Definition

      Representation of the content produced in a DICOM imaging study. A study comprises a set of series, each of which includes a set of Service-Object Pair Instances (SOP Instances - images or other data) acquired or produced in a common context. A series is of only one modality (e.g. X-ray, CT, MR, ultrasound), but a study may have multiple series of different modalities.


      The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

      ShortA set of images produced in single study (one or more series of references images)A resource in the bundle
      Control10..1
      TypeImagingStudyResource(Imaging Study (IPS))
      Is Modifierfalse
      Summaryfalse
      76. Bundle.entry:immunization
      Slice Nameimmunization
      Definition

      An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

      ShortEntry in the bundle - will have a resource or information
      Control0..*
      TypeBackboneElement
      Is Modifierfalse
      Summarytrue
      Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      78. Bundle.entry:immunization.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      80. Bundle.entry:immunization.resource
      Definition

      Describes the event of a patient being administered a vaccination or a record of a vaccination as reported by a patient, a clinician or another party and may include vaccine reaction information and what vaccination protocol was followed


      The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

      ShortImmunization event informationA resource in the bundle
      Control10..1
      TypeImmunizationResource(Immunization (IPS))
      Is Modifierfalse
      Summaryfalse
      82. Bundle.entry:medication
      Slice Namemedication
      Definition

      An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

      ShortEntry in the bundle - will have a resource or information
      Control0..*
      TypeBackboneElement
      Is Modifierfalse
      Summarytrue
      Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      84. Bundle.entry:medication.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      86. Bundle.entry:medication.resource
      Definition

      This resource is primarily used for the identification and definition of a medication for the purposes of prescribing, dispensing, and administering a medication as well as for making statements about medication use.


      The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

      ShortDefinition of a MedicationA resource in the bundle
      Comments

      IPS Medication

      Control10..1
      TypeMedicationResource(Medication (IPS))
      Is Modifierfalse
      Summaryfalse
      88. Bundle.entry:medicationrequest
      Slice Namemedicationrequest
      Definition

      An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

      ShortEntry in the bundle - will have a resource or information
      Control0..*
      TypeBackboneElement
      Is Modifierfalse
      Summarytrue
      Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      90. Bundle.entry:medicationrequest.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      92. Bundle.entry:medicationrequest.resource
      Definition

      An order or request for both supply of the medication and the instructions for administration of the medication to a patient. The resource is called "MedicationRequest" rather than "MedicationPrescription" or "MedicationOrder" to generalize the use across inpatient and outpatient settings, including care plans, etc., and to harmonize with workflow patterns.


      The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

      ShortOrdering of medication for patient or groupA resource in the bundle
      Control10..1
      TypeMedicationRequestResource(Medication Request (IPS))
      Is Modifierfalse
      Summaryfalse
      Alternate NamesPrescription, Order
      94. Bundle.entry:medicationstatement
      Slice Namemedicationstatement
      Definition

      An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

      ShortEntry in the bundle - will have a resource or information
      Control0..*
      TypeBackboneElement
      Is Modifierfalse
      Summarytrue
      Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      96. Bundle.entry:medicationstatement.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      98. Bundle.entry:medicationstatement.resource
      Definition

      A record of a medication that is being consumed by a patient. A MedicationStatement may indicate that the patient may be taking the medication now or has taken the medication in the past or will be taking the medication in the future. The source of this information can be the patient, significant other (such as a family member or spouse), or a clinician. A common scenario where this information is captured is during the history taking process during a patient visit or stay. The medication information may come from sources such as the patient's memory, from a prescription bottle, or from a list of medications the patient, clinician or other party maintains.

      The primary difference between a medication statement and a medication administration is that the medication administration has complete administration information and is based on actual administration information from the person who administered the medication. A medication statement is often, if not always, less specific. There is no required date/time when the medication was administered, in fact we only know that a source has reported the patient is taking this medication, where details such as time, quantity, or rate or even medication product may be incomplete or missing or less precise. As stated earlier, the medication statement information may come from the patient's memory, from a prescription bottle or from a list of medications the patient, clinician or other party maintains. Medication administration is more formal and is not missing detailed information.


      The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

      ShortRecord of medication being taken by a patientA resource in the bundle
      Comments

      When interpreting a medicationStatement, the value of the status and NotTaken needed to be considered: MedicationStatement.status + MedicationStatement.wasNotTaken Status=Active + NotTaken=T = Not currently taking Status=Completed + NotTaken=T = Not taken in the past Status=Intended + NotTaken=T = No intention of taking Status=Active + NotTaken=F = Taking, but not as prescribed Status=Active + NotTaken=F = Taking Status=Intended +NotTaken= F = Will be taking (not started) Status=Completed + NotTaken=F = Taken in past Status=In Error + NotTaken=N/A = In Error.

      Control10..1
      TypeMedicationStatementResource(Medication Statement (IPS))
      Is Modifierfalse
      Summaryfalse
      100. Bundle.entry:practitioner
      Slice Namepractitioner
      Definition

      An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

      ShortEntry in the bundle - will have a resource or information
      Control0..*
      TypeBackboneElement
      Is Modifierfalse
      Summarytrue
      Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      102. Bundle.entry:practitioner.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      104. Bundle.entry:practitioner.resource
      Definition

      A person who is directly or indirectly involved in the provisioning of healthcare.


      The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

      ShortA person with a formal responsibility in the provisioning of healthcare or related servicesA resource in the bundle
      Control10..1
      TypePractitionerResource(Practitioner (IPS))
      Is Modifierfalse
      Summaryfalse
      106. Bundle.entry:practitionerrole
      Slice Namepractitionerrole
      Definition

      An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

      ShortEntry in the bundle - will have a resource or information
      Control0..*
      TypeBackboneElement
      Is Modifierfalse
      Summarytrue
      Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      108. Bundle.entry:practitionerrole.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      110. Bundle.entry:practitionerrole.resource
      Definition

      A specific set of Roles/Locations/specialties/services that a practitioner may perform at an organization for a period of time.


      The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

      ShortRoles/organizations the practitioner is associated withA resource in the bundle
      Control10..1
      TypePractitionerRoleResource(PractitionerRole (IPS))
      Is Modifierfalse
      Summaryfalse
      112. Bundle.entry:procedure
      Slice Nameprocedure
      Definition

      An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

      ShortEntry in the bundle - will have a resource or information
      Control0..*
      TypeBackboneElement
      Is Modifierfalse
      Summarytrue
      Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      114. Bundle.entry:procedure.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      116. Bundle.entry:procedure.resource
      Definition

      An action that is or was performed on or for a patient. This can be a physical intervention like an operation, or less invasive like long term services, counseling, or hypnotherapy.


      The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

      ShortAn action that is being or was performed on a patientA resource in the bundle
      Control10..1
      TypeProcedureResource(Procedure (IPS))
      Is Modifierfalse
      Summaryfalse
      118. Bundle.entry:organization
      Slice Nameorganization
      Definition

      An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

      ShortEntry in the bundle - will have a resource or information
      Control0..*
      TypeBackboneElement
      Is Modifierfalse
      Summarytrue
      Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      120. Bundle.entry:organization.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      122. Bundle.entry:organization.resource
      Definition

      A formally or informally recognized grouping of people or organizations formed for the purpose of achieving some form of collective action. Includes companies, institutions, corporations, departments, community groups, healthcare practice groups, payer/insurer, etc.


      The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

      ShortA grouping of people or organizations with a common purposeA resource in the bundle
      Control10..1
      TypeOrganizationResource(Organization (IPS))
      Is Modifierfalse
      Summaryfalse
      124. Bundle.entry:observation-pregnancy-edd
      Slice Nameobservation-pregnancy-edd
      Definition

      An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

      ShortEntry in the bundle - will have a resource or information
      Control0..*
      TypeBackboneElement
      Is Modifierfalse
      Summarytrue
      Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      126. Bundle.entry:observation-pregnancy-edd.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      128. Bundle.entry:observation-pregnancy-edd.resource
      Definition

      Measurements and simple assertions made about a patient, device or other subject.


      The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

      ShortMeasurements and simple assertionsA resource in the bundle
      Comments

      Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.

      Control10..1
      TypeObservationResource(Observation - Pregnancy: EDD)
      Is Modifierfalse
      Summaryfalse
      Alternate NamesVital Signs, Measurement, Results, Tests
      130. Bundle.entry:observation-pregnancy-outcome
      Slice Nameobservation-pregnancy-outcome
      Definition

      An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

      ShortEntry in the bundle - will have a resource or information
      Control0..*
      TypeBackboneElement
      Is Modifierfalse
      Summarytrue
      Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      132. Bundle.entry:observation-pregnancy-outcome.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      134. Bundle.entry:observation-pregnancy-outcome.resource
      Definition

      Measurements and simple assertions made about a patient, device or other subject.


      The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

      ShortMeasurements and simple assertionsA resource in the bundle
      Comments

      Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.

      Control10..1
      TypeObservationResource(Observation - Pregnancy: outcome)
      Is Modifierfalse
      Summaryfalse
      Alternate NamesVital Signs, Measurement, Results, Tests
      136. Bundle.entry:observation-pregnancy-status
      Slice Nameobservation-pregnancy-status
      Definition

      An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

      ShortEntry in the bundle - will have a resource or information
      Control0..*
      TypeBackboneElement
      Is Modifierfalse
      Summarytrue
      Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      138. Bundle.entry:observation-pregnancy-status.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      140. Bundle.entry:observation-pregnancy-status.resource
      Definition

      Measurements and simple assertions made about a patient, device or other subject.


      The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

      ShortMeasurements and simple assertionsA resource in the bundle
      Comments

      Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.

      Control10..1
      TypeObservationResource(Observation - Pregnancy: status)
      Is Modifierfalse
      Summaryfalse
      Alternate NamesVital Signs, Measurement, Results, Tests
      142. Bundle.entry:observation-alcohol-use
      Slice Nameobservation-alcohol-use
      Definition

      An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

      ShortEntry in the bundle - will have a resource or information
      Control0..*
      TypeBackboneElement
      Is Modifierfalse
      Summarytrue
      Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      144. Bundle.entry:observation-alcohol-use.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      146. Bundle.entry:observation-alcohol-use.resource
      Definition

      Measurements and simple assertions made about a patient, device or other subject.


      The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

      ShortMeasurements and simple assertionsA resource in the bundle
      Comments

      Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.

      Control10..1
      TypeObservationResource(Observation - SH: alcohol use)
      Is Modifierfalse
      Summaryfalse
      Alternate NamesVital Signs, Measurement, Results, Tests
      148. Bundle.entry:observation-tobacco-use
      Slice Nameobservation-tobacco-use
      Definition

      An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

      ShortEntry in the bundle - will have a resource or information
      Control0..*
      TypeBackboneElement
      Is Modifierfalse
      Summarytrue
      Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      150. Bundle.entry:observation-tobacco-use.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      152. Bundle.entry:observation-tobacco-use.resource
      Definition

      Measurements and simple assertions made about a patient, device or other subject.


      The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

      ShortMeasurements and simple assertionsA resource in the bundle
      Comments

      Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.

      Control10..1
      TypeObservationResource(Observation - SH: tobacco use)
      Is Modifierfalse
      Summaryfalse
      Alternate NamesVital Signs, Measurement, Results, Tests
      154. Bundle.entry:observation-results-laboratory-pathology
      Slice Nameobservation-results-laboratory-pathology
      Definition

      An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

      ShortEntry in the bundle - will have a resource or information
      Control0..*
      TypeBackboneElement
      Is Modifierfalse
      Summarytrue
      Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      156. Bundle.entry:observation-results-laboratory-pathology.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      158. Bundle.entry:observation-results-laboratory-pathology.resource
      Definition

      This observation may represent the result of a simple laboratory or pathology test such as hematocrit, or it may group the set of results produced by a multi-test study or panel such as a complete blood count, a dynamic function test, or a urine specimen study. In the latter case, the observation carries the overall conclusion of the study and references the atomic results of the study as "has-member" child observations


      The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

      ShortLaboratory (including Pathology) result for a simple test or for a panel/studyA resource in the bundle
      Comments

      Represents either a lab simple observation or the group of observations produced by a laboratory study.

      Control10..1
      TypeObservationResource(Observation Results: laboratory/pathology (IPS))
      Is Modifierfalse
      Summaryfalse
      Alternate NamesVital Signs, Measurement, Results, Tests
      160. Bundle.entry:observation-results-radiology
      Slice Nameobservation-results-radiology
      Definition

      An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

      ShortEntry in the bundle - will have a resource or information
      Control0..*
      TypeBackboneElement
      Is Modifierfalse
      Summarytrue
      Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      162. Bundle.entry:observation-results-radiology.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      164. Bundle.entry:observation-results-radiology.resource
      Definition

      Measurements and simple assertions made about a patient, device or other subject.


      The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

      ShortMeasurements and simple assertionsA resource in the bundle
      Comments

      Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.

      Control10..1
      TypeObservationResource(Observation Results: radiology (IPS))
      Is Modifierfalse
      Summaryfalse
      Alternate NamesVital Signs, Measurement, Results, Tests
      166. Bundle.entry:observation-vital-signs
      Slice Nameobservation-vital-signs
      Definition

      An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

      ShortEntry in the bundle - will have a resource or information
      Control0..*
      TypeBackboneElement
      Is Modifierfalse
      Summarytrue
      Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      168. Bundle.entry:observation-vital-signs.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      170. Bundle.entry:observation-vital-signs.resource
      Definition

      The FHIR Vitals Signs profile sets minimum expectations for the Observation Resource to record, search and fetch the vital signs associated with a patient.


      The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

      ShortFHIR Vital Signs ProfileA resource in the bundle
      Comments

      Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.

      Control10..1
      TypeObservationResource(Vital Signs Profile)
      Is Modifierfalse
      Summaryfalse
      Alternate NamesVital Signs, Measurement, Results, Tests
      172. Bundle.entry:specimen
      Slice Namespecimen
      Definition

      An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

      ShortEntry in the bundle - will have a resource or information
      Control0..*
      TypeBackboneElement
      Is Modifierfalse
      Summarytrue
      Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      174. Bundle.entry:specimen.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      176. Bundle.entry:specimen.resource
      Definition

      A sample to be used for analysis.


      The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

      ShortSample for analysisA resource in the bundle
      Control10..1
      TypeSpecimenResource(Specimen (IPS))
      Is Modifierfalse
      Summaryfalse
      178. Bundle.entry:flag
      Slice Nameflag
      Definition

      An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

      ShortEntry in the bundle - will have a resource or information
      Control0..*
      TypeBackboneElement
      Is Modifierfalse
      Summarytrue
      Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      180. Bundle.entry:flag.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      182. Bundle.entry:flag.resource
      Definition

      Prospective warnings of potential issues when providing care to the patient.


      The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

      ShortKey information to flag to healthcare providersA resource in the bundle
      Control10..1
      TypeFlagResource(Flag - Alert (IPS))
      Is Modifierfalse
      Summaryfalse
      Alternate NamesBarriers to Care, Alert, Warning
      184. Bundle.entry:clinicalimpression
      Slice Nameclinicalimpression
      Definition

      An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

      ShortEntry in the bundle - will have a resource or information
      Control0..*
      TypeBackboneElement
      Is Modifierfalse
      Summarytrue
      Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      186. Bundle.entry:clinicalimpression.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      188. Bundle.entry:clinicalimpression.resource
      Definition

      The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

      ShortA resource in the bundle
      Control10..1
      TypeClinicalImpressionResource
      Is Modifierfalse
      Summarytrue
      190. Bundle.entry:careplan
      Slice Namecareplan
      Definition

      An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

      ShortEntry in the bundle - will have a resource or information
      Control0..*
      TypeBackboneElement
      Is Modifierfalse
      Summarytrue
      Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      192. Bundle.entry:careplan.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      194. Bundle.entry:careplan.resource
      Definition

      The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

      ShortA resource in the bundle
      Control10..1
      TypeCarePlanResource
      Is Modifierfalse
      Summarytrue
      196. Bundle.entry:consent
      Slice Nameconsent
      Definition

      An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

      ShortEntry in the bundle - will have a resource or information
      Control0..*
      TypeBackboneElement
      Is Modifierfalse
      Summarytrue
      Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      198. Bundle.entry:consent.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      200. Bundle.entry:consent.resource
      Definition

      The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

      ShortA resource in the bundle
      Control10..1
      TypeConsentResource
      Is Modifierfalse
      Summarytrue
      202. Bundle.entry:documentreference
      Slice Namedocumentreference
      Definition

      An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

      ShortEntry in the bundle - will have a resource or information
      Control0..*
      TypeBackboneElement
      Is Modifierfalse
      Summarytrue
      Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      204. Bundle.entry:documentreference.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      206. Bundle.entry:documentreference.resource
      Definition

      The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

      ShortA resource in the bundle
      Control10..1
      TypeDocumentReferenceResource
      Is Modifierfalse
      Summarytrue

      Guidance on how to interpret the contents of this table can be found here

      0. Bundle
      Definition

      International Patient Summary Bundle. A container for a collection of resources in the patient summary document.

      ShortInternational Patient Summary Bundle
      Control0..*
      Is Modifierfalse
      Summaryfalse
      Invariantsbdl-1: total only when a search or history (total.empty() or (type = 'searchset') or (type = 'history'))
      bdl-2: entry.search only when a search (entry.search.empty() or (type = 'searchset'))
      bdl-3: entry.request mandatory for batch/transaction/history, otherwise prohibited (entry.all(request.exists() = (%resource.type = 'batch' or %resource.type = 'transaction' or %resource.type = 'history')))
      bdl-4: entry.response mandatory for batch-response/transaction-response/history, otherwise prohibited (entry.all(response.exists() = (%resource.type = 'batch-response' or %resource.type = 'transaction-response' or %resource.type = 'history')))
      bdl-7: FullUrl must be unique in a bundle, or else entries with the same fullUrl must have different meta.versionId (except in history bundles) ((type = 'history') or entry.where(fullUrl.exists()).select(fullUrl&resource.meta.versionId).isDistinct())
      bdl-9: A document must have an identifier with a system and a value (type = 'document' implies (identifier.system.exists() and identifier.value.exists()))
      bdl-10: A document must have a date (type = 'document' implies (timestamp.hasValue()))
      bdl-11: A document must have a Composition as the first resource (type = 'document' implies entry.first().resource.is(Composition))
      bdl-12: A message must have a MessageHeader as the first resource (type = 'message' implies entry.first().resource.is(MessageHeader))
      bdl-ips-1: An IPS document must have no additional Composition (including Composition subclass) resources besides the first. (entry.tail().where(resource is Composition).empty())
      2. Bundle.id
      Definition

      The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

      ShortLogical id of this artifact
      Comments

      The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

      Control0..1
      Typeid
      Is Modifierfalse
      Summarytrue
      4. Bundle.meta
      Definition

      The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

      ShortMetadata about the resource
      Control0..1
      TypeMeta
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      6. Bundle.implicitRules
      Definition

      A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

      ShortA set of rules under which this content was created
      Comments

      Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

      Control0..1
      Typeuri
      Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      8. Bundle.language
      Definition

      The base language in which the resource is written.

      ShortLanguage of the resource content
      Comments

      Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

      Control0..1
      BindingThe codes SHOULD be taken from CommonLanguages
      (preferred to http://hl7.org/fhir/ValueSet/languages)

      A human language.

      Additional BindingsPurpose
      AllLanguagesMax Binding
      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      10. Bundle.identifier
      Definition

      A persistent identifier for the bundle that won't change as a bundle is copied from server to server.

      ShortPersistent identifier for the bundle
      Comments

      Persistent identity generally only matters for batches of type Document, Message, and Collection. It would not normally be populated for search and history results and servers ignore Bundle.identifier when processing batches and transactions. For Documents the .identifier SHALL be populated such that the .identifier is globally unique.

      NoteThis is a business identifier, not a resource identifier (see discussion)
      Control1..1
      TypeIdentifier
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      12. Bundle.type
      Definition

      Indicates the purpose of this bundle - how it is intended to be used.

      Shortdocument | message | transaction | transaction-response | batch | batch-response | history | searchset | collection
      Comments

      It's possible to use a bundle for other purposes (e.g. a document can be accepted as a transaction). This is primarily defined so that there can be specific rules for some of the bundle types.

      Control1..1
      BindingThe codes SHALL be taken from BundleType
      (required to http://hl7.org/fhir/ValueSet/bundle-type|4.0.1)

      Indicates the purpose of a bundle - how it is intended to be used.

      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Fixed Valuedocument
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      14. Bundle.timestamp
      Definition

      The date/time that the bundle was assembled - i.e. when the resources were placed in the bundle.

      ShortWhen the bundle was assembled
      Comments

      For many bundles, the timestamp is equal to .meta.lastUpdated, because they are not stored (e.g. search results). When a bundle is placed in a persistent store, .meta.lastUpdated will be usually be changed by the server. When the bundle is a message, a middleware agent altering the message (even if not stored) SHOULD update .meta.lastUpdated. .timestamp is used to track the original time of the Bundle, and SHOULD be populated.

      Usage:

      • document : the date the document was created. Note: the composition may predate the document, or be associated with multiple documents. The date of the composition - the authoring time - may be earlier than the document assembly time
      • message : the date that the content of the message was assembled. This date is not changed by middleware engines unless they add additional data that changes the meaning of the time of the message
      • history : the date that the history was assembled. This time would be used as the _since time to ask for subsequent updates
      • searchset : the time that the search set was assembled. Note that different pages MAY have different timestamps but need not. Having different timestamps does not imply that subsequent pages will represent or include changes made since the initial query
      • transaction | transaction-response | batch | batch-response | collection : no particular assigned meaning

      The timestamp value should be greater than the lastUpdated and other timestamps in the resources in the bundle, and it should be equal or earlier than the .meta.lastUpdated on the Bundle itself.

      Control1..1
      Typeinstant
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      16. Bundle.total
      Definition

      If a set of search matches, this is the total number of entries of type 'match' across all pages in the search. It does not include search.mode = 'include' or 'outcome' entries and it does not provide a count of the number of entries in the Bundle.

      ShortIf search, the total number of matches
      Comments

      Only used if the bundle is a search result set. The total does not include resources such as OperationOutcome and included resources, only the total number of matching resources.

      Control0..1
      This element is affected by the following invariants: bdl-1
      TypeunsignedInt
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      18. Bundle.link
      Definition

      A series of links that provide context to this bundle.

      ShortLinks related to this Bundle
      Comments

      Both Bundle.link and Bundle.entry.link are defined to support providing additional context when Bundles are used (e.g. HATEOAS).

      Bundle.entry.link corresponds to links found in the HTTP header if the resource in the entry was read directly.

      This specification defines some specific uses of Bundle.link for searching and paging, but no specific uses for Bundle.entry.link, and no defined function in a transaction - the meaning is implementation specific.

      Control0..*
      TypeBackboneElement
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      20. Bundle.link.id
      Definition

      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

      ShortUnique id for inter-element referencing
      Control0..1
      Typestring
      Is Modifierfalse
      XML FormatIn the XML format, this property is represented as an attribute.
      Summaryfalse
      22. Bundle.link.extension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      24. Bundle.link.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      26. Bundle.link.relation
      Definition

      A name which details the functional use for this link - see http://www.iana.org/assignments/link-relations/link-relations.xhtml#link-relations-1.

      ShortSee http://www.iana.org/assignments/link-relations/link-relations.xhtml#link-relations-1
      Control1..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      28. Bundle.link.url
      Definition

      The reference details for the link.

      ShortReference details for the link
      Control1..1
      Typeuri
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      30. Bundle.entry
      Definition

      An entry resource included in the patient summary document bundle resource.

      ShortEntry resource in the patient summary bundle
      Comments

      Must contain the IPS Composition as the first entry (only a single Composition resource instance may be included) and a Patient resource. Additional constraints are specified in the IPS Composition profile.

      Control2..*
      TypeBackboneElement
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      SlicingThis element introduces a set of slices on Bundle.entry. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • type @ resource
      • profile @ resource
      • 32. Bundle.entry.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        34. Bundle.entry.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        36. Bundle.entry.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        38. Bundle.entry.link
        Definition

        A series of links that provide context to this entry.

        ShortLinks related to this entry
        Control0..*
        TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        40. Bundle.entry.fullUrl
        Definition

        The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

        • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
        • Results from operations might involve resources that are not identified.
        ShortURI for resource (Absolute URL server address or URI for UUID/OID)
        Comments

        fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

        Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

        Control1..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        42. Bundle.entry.resource
        Definition

        The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

        ShortA resource in the bundle
        Control0..1
        TypeResource
        Is Modifierfalse
        Summarytrue
        44. Bundle.entry.search
        Definition

        Information about the search process that lead to the creation of this entry.

        ShortSearch related information
        Control0..0
        This element is affected by the following invariants: bdl-2
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        51. Bundle.entry.request
        Definition

        Additional information about how this entry should be processed as part of a transaction or batch. For history, it shows how the entry was processed to create the version contained in the entry.

        ShortAdditional execution information (transaction/batch/history)
        Control0..0
        This element is affected by the following invariants: bdl-3
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        62. Bundle.entry.response
        Definition

        Indicates the results of processing the corresponding 'request' entry in the batch or transaction being responded to or what the results of an operation where when returning history.

        ShortResults of execution (transaction/batch/history)
        Control0..0
        This element is affected by the following invariants: bdl-4
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        72. Bundle.entry:composition
        Slice Namecomposition
        Definition

        An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

        ShortEntry in the bundle - will have a resource or information
        Control1..1
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
        bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
        ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        74. Bundle.entry:composition.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        76. Bundle.entry:composition.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        78. Bundle.entry:composition.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        80. Bundle.entry:composition.link
        Definition

        A series of links that provide context to this entry.

        ShortLinks related to this entry
        Control0..*
        TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        82. Bundle.entry:composition.fullUrl
        Definition

        The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

        • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
        • Results from operations might involve resources that are not identified.
        ShortURI for resource (Absolute URL server address or URI for UUID/OID)
        Comments

        fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

        Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        84. Bundle.entry:composition.resource
        Definition

        International Patient Summary composition. A composition is a set of healthcare-related information that is assembled together into a single logical document that provides a single coherent statement of meaning, establishes its own context and that has clinical attestation with regard to who is making the statement. While a Composition defines the structure, it does not actually contain the content: rather the full content of a document is contained in a Bundle, of which the Composition is the first resource contained.

        ShortInternational Patient Summary composition
        Comments

        While the focus of this specification is on patient-specific clinical statements, this resource can also apply to other healthcare-related statements such as study protocol designs, healthcare invoices and other activities that are not necessarily patient-specific or clinical.

        Control1..1
        TypeComposition(Composition (IPS))
        Is Modifierfalse
        Summaryfalse
        86. Bundle.entry:composition.search
        Definition

        Information about the search process that lead to the creation of this entry.

        ShortSearch related information
        Control0..1
        This element is affected by the following invariants: bdl-2
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        88. Bundle.entry:composition.search.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        90. Bundle.entry:composition.search.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        92. Bundle.entry:composition.search.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        94. Bundle.entry:composition.search.mode
        Definition

        Why this entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

        Shortmatch | include | outcome - why this is in the result set
        Comments

        There is only one mode. In some corner cases, a resource may be included because it is both a match and an include. In these circumstances, 'match' takes precedence.

        Control0..1
        BindingThe codes SHALL be taken from SearchEntryMode
        (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

        Why an entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        96. Bundle.entry:composition.search.score
        Definition

        When searching, the server's search ranking score for the entry.

        ShortSearch ranking (between 0 and 1)
        Comments

        Servers are not required to return a ranking score. 1 is most relevant, and 0 is least relevant. Often, search results are sorted by score, but the client may specify a different sort order.

        See Patient Match for the EMPI search which relates to this element.

        Control0..1
        Typedecimal
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        98. Bundle.entry:composition.request
        Definition

        Additional information about how this entry should be processed as part of a transaction or batch. For history, it shows how the entry was processed to create the version contained in the entry.

        ShortAdditional execution information (transaction/batch/history)
        Control0..1
        This element is affected by the following invariants: bdl-3
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        100. Bundle.entry:composition.request.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        102. Bundle.entry:composition.request.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        104. Bundle.entry:composition.request.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        106. Bundle.entry:composition.request.method
        Definition

        In a transaction or batch, this is the HTTP action to be executed for this entry. In a history bundle, this indicates the HTTP action that occurred.

        ShortGET | HEAD | POST | PUT | DELETE | PATCH
        Control1..1
        BindingThe codes SHALL be taken from HTTPVerb
        (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

        HTTP verbs (in the HTTP command line). See HTTP rfc for details.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        108. Bundle.entry:composition.request.url
        Definition

        The URL for this entry, relative to the root (the address to which the request is posted).

        ShortURL for HTTP equivalent of this entry
        Comments

        E.g. for a Patient Create, the method would be "POST" and the URL would be "Patient". For a Patient Update, the method would be PUT and the URL would be "Patient/[id]".

        Control1..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        110. Bundle.entry:composition.request.ifNoneMatch
        Definition

        If the ETag values match, return a 304 Not Modified status. See the API documentation for "Conditional Read".

        ShortFor managing cache currency
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        112. Bundle.entry:composition.request.ifModifiedSince
        Definition

        Only perform the operation if the last updated date matches. See the API documentation for "Conditional Read".

        ShortFor managing cache currency
        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        114. Bundle.entry:composition.request.ifMatch
        Definition

        Only perform the operation if the Etag value matches. For more information, see the API section "Managing Resource Contention".

        ShortFor managing update contention
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        116. Bundle.entry:composition.request.ifNoneExist
        Definition

        Instruct the server not to perform the create if a specified resource already exists. For further information, see the API documentation for "Conditional Create". This is just the query portion of the URL - what follows the "?" (not including the "?").

        ShortFor conditional creates
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        118. Bundle.entry:composition.response
        Definition

        Indicates the results of processing the corresponding 'request' entry in the batch or transaction being responded to or what the results of an operation where when returning history.

        ShortResults of execution (transaction/batch/history)
        Control0..1
        This element is affected by the following invariants: bdl-4
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        120. Bundle.entry:composition.response.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        122. Bundle.entry:composition.response.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        124. Bundle.entry:composition.response.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        126. Bundle.entry:composition.response.status
        Definition

        The status code returned by processing this entry. The status SHALL start with a 3 digit HTTP code (e.g. 404) and may contain the standard HTTP description associated with the status code.

        ShortStatus response code (text optional)
        Control1..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        128. Bundle.entry:composition.response.location
        Definition

        The location header created by processing this operation, populated if the operation returns a location.

        ShortThe location (if the operation returns a location)
        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        130. Bundle.entry:composition.response.etag
        Definition

        The Etag for the resource, if the operation for the entry produced a versioned resource (see Resource Metadata and Versioning and Managing Resource Contention).

        ShortThe Etag for the resource (if relevant)
        Comments

        Etags match the Resource.meta.versionId. The ETag has to match the version id in the header if a resource is included.

        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        132. Bundle.entry:composition.response.lastModified
        Definition

        The date/time that the resource was modified on the server.

        ShortServer's date time modified
        Comments

        This has to match the same time in the meta header (meta.lastUpdated) if a resource is included.

        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        134. Bundle.entry:composition.response.outcome
        Definition

        An OperationOutcome containing hints and warnings produced as part of processing this entry in a batch or transaction.

        ShortOperationOutcome with hints and warnings (for batch/transaction)
        Comments

        For a POST/PUT operation, this is the equivalent outcome that would be returned for prefer = operationoutcome - except that the resource is always returned whether or not the outcome is returned.

        This outcome is not used for error responses in batch/transaction, only for hints and warnings. In a batch operation, the error will be in Bundle.entry.response, and for transaction, there will be a single OperationOutcome instead of a bundle in the case of an error.

        Control0..1
        TypeResource
        Is Modifierfalse
        Summarytrue
        136. Bundle.entry:patient
        Slice Namepatient
        Definition

        An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

        ShortEntry in the bundle - will have a resource or information
        Control1..1
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
        bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
        ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        138. Bundle.entry:patient.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        140. Bundle.entry:patient.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        142. Bundle.entry:patient.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        144. Bundle.entry:patient.link
        Definition

        A series of links that provide context to this entry.

        ShortLinks related to this entry
        Control0..*
        TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        146. Bundle.entry:patient.fullUrl
        Definition

        The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

        • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
        • Results from operations might involve resources that are not identified.
        ShortURI for resource (Absolute URL server address or URI for UUID/OID)
        Comments

        fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

        Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        148. Bundle.entry:patient.resource
        Definition

        Demographics and other administrative information about an individual or animal receiving care or other health-related services.

        ShortInformation about an individual or animal receiving health care services
        Control1..1
        TypePatient(Patient (IPS))
        Is Modifierfalse
        Summaryfalse
        Alternate NamesSubjectOfCare Client Resident
        150. Bundle.entry:patient.search
        Definition

        Information about the search process that lead to the creation of this entry.

        ShortSearch related information
        Control0..1
        This element is affected by the following invariants: bdl-2
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        152. Bundle.entry:patient.search.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        154. Bundle.entry:patient.search.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        156. Bundle.entry:patient.search.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        158. Bundle.entry:patient.search.mode
        Definition

        Why this entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

        Shortmatch | include | outcome - why this is in the result set
        Comments

        There is only one mode. In some corner cases, a resource may be included because it is both a match and an include. In these circumstances, 'match' takes precedence.

        Control0..1
        BindingThe codes SHALL be taken from SearchEntryMode
        (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

        Why an entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        160. Bundle.entry:patient.search.score
        Definition

        When searching, the server's search ranking score for the entry.

        ShortSearch ranking (between 0 and 1)
        Comments

        Servers are not required to return a ranking score. 1 is most relevant, and 0 is least relevant. Often, search results are sorted by score, but the client may specify a different sort order.

        See Patient Match for the EMPI search which relates to this element.

        Control0..1
        Typedecimal
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        162. Bundle.entry:patient.request
        Definition

        Additional information about how this entry should be processed as part of a transaction or batch. For history, it shows how the entry was processed to create the version contained in the entry.

        ShortAdditional execution information (transaction/batch/history)
        Control0..1
        This element is affected by the following invariants: bdl-3
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        164. Bundle.entry:patient.request.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        166. Bundle.entry:patient.request.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        168. Bundle.entry:patient.request.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        170. Bundle.entry:patient.request.method
        Definition

        In a transaction or batch, this is the HTTP action to be executed for this entry. In a history bundle, this indicates the HTTP action that occurred.

        ShortGET | HEAD | POST | PUT | DELETE | PATCH
        Control1..1
        BindingThe codes SHALL be taken from HTTPVerb
        (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

        HTTP verbs (in the HTTP command line). See HTTP rfc for details.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        172. Bundle.entry:patient.request.url
        Definition

        The URL for this entry, relative to the root (the address to which the request is posted).

        ShortURL for HTTP equivalent of this entry
        Comments

        E.g. for a Patient Create, the method would be "POST" and the URL would be "Patient". For a Patient Update, the method would be PUT and the URL would be "Patient/[id]".

        Control1..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        174. Bundle.entry:patient.request.ifNoneMatch
        Definition

        If the ETag values match, return a 304 Not Modified status. See the API documentation for "Conditional Read".

        ShortFor managing cache currency
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        176. Bundle.entry:patient.request.ifModifiedSince
        Definition

        Only perform the operation if the last updated date matches. See the API documentation for "Conditional Read".

        ShortFor managing cache currency
        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        178. Bundle.entry:patient.request.ifMatch
        Definition

        Only perform the operation if the Etag value matches. For more information, see the API section "Managing Resource Contention".

        ShortFor managing update contention
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        180. Bundle.entry:patient.request.ifNoneExist
        Definition

        Instruct the server not to perform the create if a specified resource already exists. For further information, see the API documentation for "Conditional Create". This is just the query portion of the URL - what follows the "?" (not including the "?").

        ShortFor conditional creates
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        182. Bundle.entry:patient.response
        Definition

        Indicates the results of processing the corresponding 'request' entry in the batch or transaction being responded to or what the results of an operation where when returning history.

        ShortResults of execution (transaction/batch/history)
        Control0..1
        This element is affected by the following invariants: bdl-4
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        184. Bundle.entry:patient.response.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        186. Bundle.entry:patient.response.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        188. Bundle.entry:patient.response.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        190. Bundle.entry:patient.response.status
        Definition

        The status code returned by processing this entry. The status SHALL start with a 3 digit HTTP code (e.g. 404) and may contain the standard HTTP description associated with the status code.

        ShortStatus response code (text optional)
        Control1..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        192. Bundle.entry:patient.response.location
        Definition

        The location header created by processing this operation, populated if the operation returns a location.

        ShortThe location (if the operation returns a location)
        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        194. Bundle.entry:patient.response.etag
        Definition

        The Etag for the resource, if the operation for the entry produced a versioned resource (see Resource Metadata and Versioning and Managing Resource Contention).

        ShortThe Etag for the resource (if relevant)
        Comments

        Etags match the Resource.meta.versionId. The ETag has to match the version id in the header if a resource is included.

        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        196. Bundle.entry:patient.response.lastModified
        Definition

        The date/time that the resource was modified on the server.

        ShortServer's date time modified
        Comments

        This has to match the same time in the meta header (meta.lastUpdated) if a resource is included.

        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        198. Bundle.entry:patient.response.outcome
        Definition

        An OperationOutcome containing hints and warnings produced as part of processing this entry in a batch or transaction.

        ShortOperationOutcome with hints and warnings (for batch/transaction)
        Comments

        For a POST/PUT operation, this is the equivalent outcome that would be returned for prefer = operationoutcome - except that the resource is always returned whether or not the outcome is returned.

        This outcome is not used for error responses in batch/transaction, only for hints and warnings. In a batch operation, the error will be in Bundle.entry.response, and for transaction, there will be a single OperationOutcome instead of a bundle in the case of an error.

        Control0..1
        TypeResource
        Is Modifierfalse
        Summarytrue
        200. Bundle.entry:allergyintolerance
        Slice Nameallergyintolerance
        Definition

        An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

        ShortEntry in the bundle - will have a resource or information
        Control0..*
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
        bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
        ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        202. Bundle.entry:allergyintolerance.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        204. Bundle.entry:allergyintolerance.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        206. Bundle.entry:allergyintolerance.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        208. Bundle.entry:allergyintolerance.link
        Definition

        A series of links that provide context to this entry.

        ShortLinks related to this entry
        Control0..*
        TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        210. Bundle.entry:allergyintolerance.fullUrl
        Definition

        The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

        • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
        • Results from operations might involve resources that are not identified.
        ShortURI for resource (Absolute URL server address or URI for UUID/OID)
        Comments

        fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

        Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        212. Bundle.entry:allergyintolerance.resource
        Definition

        Risk of harmful or undesirable, physiological response which is unique to an individual and associated with exposure to a substance.

        ShortAllergy or Intolerance (generally: Risk of adverse reaction to a substance)
        Comments

        Substances include, but are not limited to: a therapeutic substance administered correctly at an appropriate dosage for the individual; food; material derived from plants or animals; or venom from insect stings.

        Control1..1
        TypeAllergyIntolerance(Allergy Intolerance (IPS))
        Is Modifierfalse
        Summaryfalse
        Alternate NamesAllergy, Intolerance, Adverse Reaction
        214. Bundle.entry:allergyintolerance.search
        Definition

        Information about the search process that lead to the creation of this entry.

        ShortSearch related information
        Control0..1
        This element is affected by the following invariants: bdl-2
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        216. Bundle.entry:allergyintolerance.search.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        218. Bundle.entry:allergyintolerance.search.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        220. Bundle.entry:allergyintolerance.search.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        222. Bundle.entry:allergyintolerance.search.mode
        Definition

        Why this entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

        Shortmatch | include | outcome - why this is in the result set
        Comments

        There is only one mode. In some corner cases, a resource may be included because it is both a match and an include. In these circumstances, 'match' takes precedence.

        Control0..1
        BindingThe codes SHALL be taken from SearchEntryMode
        (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

        Why an entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        224. Bundle.entry:allergyintolerance.search.score
        Definition

        When searching, the server's search ranking score for the entry.

        ShortSearch ranking (between 0 and 1)
        Comments

        Servers are not required to return a ranking score. 1 is most relevant, and 0 is least relevant. Often, search results are sorted by score, but the client may specify a different sort order.

        See Patient Match for the EMPI search which relates to this element.

        Control0..1
        Typedecimal
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        226. Bundle.entry:allergyintolerance.request
        Definition

        Additional information about how this entry should be processed as part of a transaction or batch. For history, it shows how the entry was processed to create the version contained in the entry.

        ShortAdditional execution information (transaction/batch/history)
        Control0..1
        This element is affected by the following invariants: bdl-3
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        228. Bundle.entry:allergyintolerance.request.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        230. Bundle.entry:allergyintolerance.request.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        232. Bundle.entry:allergyintolerance.request.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        234. Bundle.entry:allergyintolerance.request.method
        Definition

        In a transaction or batch, this is the HTTP action to be executed for this entry. In a history bundle, this indicates the HTTP action that occurred.

        ShortGET | HEAD | POST | PUT | DELETE | PATCH
        Control1..1
        BindingThe codes SHALL be taken from HTTPVerb
        (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

        HTTP verbs (in the HTTP command line). See HTTP rfc for details.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        236. Bundle.entry:allergyintolerance.request.url
        Definition

        The URL for this entry, relative to the root (the address to which the request is posted).

        ShortURL for HTTP equivalent of this entry
        Comments

        E.g. for a Patient Create, the method would be "POST" and the URL would be "Patient". For a Patient Update, the method would be PUT and the URL would be "Patient/[id]".

        Control1..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        238. Bundle.entry:allergyintolerance.request.ifNoneMatch
        Definition

        If the ETag values match, return a 304 Not Modified status. See the API documentation for "Conditional Read".

        ShortFor managing cache currency
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        240. Bundle.entry:allergyintolerance.request.ifModifiedSince
        Definition

        Only perform the operation if the last updated date matches. See the API documentation for "Conditional Read".

        ShortFor managing cache currency
        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        242. Bundle.entry:allergyintolerance.request.ifMatch
        Definition

        Only perform the operation if the Etag value matches. For more information, see the API section "Managing Resource Contention".

        ShortFor managing update contention
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        244. Bundle.entry:allergyintolerance.request.ifNoneExist
        Definition

        Instruct the server not to perform the create if a specified resource already exists. For further information, see the API documentation for "Conditional Create". This is just the query portion of the URL - what follows the "?" (not including the "?").

        ShortFor conditional creates
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        246. Bundle.entry:allergyintolerance.response
        Definition

        Indicates the results of processing the corresponding 'request' entry in the batch or transaction being responded to or what the results of an operation where when returning history.

        ShortResults of execution (transaction/batch/history)
        Control0..1
        This element is affected by the following invariants: bdl-4
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        248. Bundle.entry:allergyintolerance.response.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        250. Bundle.entry:allergyintolerance.response.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        252. Bundle.entry:allergyintolerance.response.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        254. Bundle.entry:allergyintolerance.response.status
        Definition

        The status code returned by processing this entry. The status SHALL start with a 3 digit HTTP code (e.g. 404) and may contain the standard HTTP description associated with the status code.

        ShortStatus response code (text optional)
        Control1..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        256. Bundle.entry:allergyintolerance.response.location
        Definition

        The location header created by processing this operation, populated if the operation returns a location.

        ShortThe location (if the operation returns a location)
        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        258. Bundle.entry:allergyintolerance.response.etag
        Definition

        The Etag for the resource, if the operation for the entry produced a versioned resource (see Resource Metadata and Versioning and Managing Resource Contention).

        ShortThe Etag for the resource (if relevant)
        Comments

        Etags match the Resource.meta.versionId. The ETag has to match the version id in the header if a resource is included.

        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        260. Bundle.entry:allergyintolerance.response.lastModified
        Definition

        The date/time that the resource was modified on the server.

        ShortServer's date time modified
        Comments

        This has to match the same time in the meta header (meta.lastUpdated) if a resource is included.

        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        262. Bundle.entry:allergyintolerance.response.outcome
        Definition

        An OperationOutcome containing hints and warnings produced as part of processing this entry in a batch or transaction.

        ShortOperationOutcome with hints and warnings (for batch/transaction)
        Comments

        For a POST/PUT operation, this is the equivalent outcome that would be returned for prefer = operationoutcome - except that the resource is always returned whether or not the outcome is returned.

        This outcome is not used for error responses in batch/transaction, only for hints and warnings. In a batch operation, the error will be in Bundle.entry.response, and for transaction, there will be a single OperationOutcome instead of a bundle in the case of an error.

        Control0..1
        TypeResource
        Is Modifierfalse
        Summarytrue
        264. Bundle.entry:condition
        Slice Namecondition
        Definition

        An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

        ShortEntry in the bundle - will have a resource or information
        Control0..*
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
        bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
        ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        266. Bundle.entry:condition.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        268. Bundle.entry:condition.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        270. Bundle.entry:condition.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        272. Bundle.entry:condition.link
        Definition

        A series of links that provide context to this entry.

        ShortLinks related to this entry
        Control0..*
        TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        274. Bundle.entry:condition.fullUrl
        Definition

        The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

        • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
        • Results from operations might involve resources that are not identified.
        ShortURI for resource (Absolute URL server address or URI for UUID/OID)
        Comments

        fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

        Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        276. Bundle.entry:condition.resource
        Definition

        A clinical condition, problem, diagnosis, or other event, situation, issue, or clinical concept that has risen to a level of concern.

        ShortDocumentation of a health problem of the patient
        Control1..1
        TypeCondition(Condition (IPS))
        Is Modifierfalse
        Summaryfalse
        278. Bundle.entry:condition.search
        Definition

        Information about the search process that lead to the creation of this entry.

        ShortSearch related information
        Control0..1
        This element is affected by the following invariants: bdl-2
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        280. Bundle.entry:condition.search.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        282. Bundle.entry:condition.search.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        284. Bundle.entry:condition.search.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        286. Bundle.entry:condition.search.mode
        Definition

        Why this entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

        Shortmatch | include | outcome - why this is in the result set
        Comments

        There is only one mode. In some corner cases, a resource may be included because it is both a match and an include. In these circumstances, 'match' takes precedence.

        Control0..1
        BindingThe codes SHALL be taken from SearchEntryMode
        (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

        Why an entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        288. Bundle.entry:condition.search.score
        Definition

        When searching, the server's search ranking score for the entry.

        ShortSearch ranking (between 0 and 1)
        Comments

        Servers are not required to return a ranking score. 1 is most relevant, and 0 is least relevant. Often, search results are sorted by score, but the client may specify a different sort order.

        See Patient Match for the EMPI search which relates to this element.

        Control0..1
        Typedecimal
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        290. Bundle.entry:condition.request
        Definition

        Additional information about how this entry should be processed as part of a transaction or batch. For history, it shows how the entry was processed to create the version contained in the entry.

        ShortAdditional execution information (transaction/batch/history)
        Control0..1
        This element is affected by the following invariants: bdl-3
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        292. Bundle.entry:condition.request.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        294. Bundle.entry:condition.request.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        296. Bundle.entry:condition.request.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        298. Bundle.entry:condition.request.method
        Definition

        In a transaction or batch, this is the HTTP action to be executed for this entry. In a history bundle, this indicates the HTTP action that occurred.

        ShortGET | HEAD | POST | PUT | DELETE | PATCH
        Control1..1
        BindingThe codes SHALL be taken from HTTPVerb
        (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

        HTTP verbs (in the HTTP command line). See HTTP rfc for details.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        300. Bundle.entry:condition.request.url
        Definition

        The URL for this entry, relative to the root (the address to which the request is posted).

        ShortURL for HTTP equivalent of this entry
        Comments

        E.g. for a Patient Create, the method would be "POST" and the URL would be "Patient". For a Patient Update, the method would be PUT and the URL would be "Patient/[id]".

        Control1..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        302. Bundle.entry:condition.request.ifNoneMatch
        Definition

        If the ETag values match, return a 304 Not Modified status. See the API documentation for "Conditional Read".

        ShortFor managing cache currency
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        304. Bundle.entry:condition.request.ifModifiedSince
        Definition

        Only perform the operation if the last updated date matches. See the API documentation for "Conditional Read".

        ShortFor managing cache currency
        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        306. Bundle.entry:condition.request.ifMatch
        Definition

        Only perform the operation if the Etag value matches. For more information, see the API section "Managing Resource Contention".

        ShortFor managing update contention
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        308. Bundle.entry:condition.request.ifNoneExist
        Definition

        Instruct the server not to perform the create if a specified resource already exists. For further information, see the API documentation for "Conditional Create". This is just the query portion of the URL - what follows the "?" (not including the "?").

        ShortFor conditional creates
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        310. Bundle.entry:condition.response
        Definition

        Indicates the results of processing the corresponding 'request' entry in the batch or transaction being responded to or what the results of an operation where when returning history.

        ShortResults of execution (transaction/batch/history)
        Control0..1
        This element is affected by the following invariants: bdl-4
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        312. Bundle.entry:condition.response.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        314. Bundle.entry:condition.response.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        316. Bundle.entry:condition.response.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        318. Bundle.entry:condition.response.status
        Definition

        The status code returned by processing this entry. The status SHALL start with a 3 digit HTTP code (e.g. 404) and may contain the standard HTTP description associated with the status code.

        ShortStatus response code (text optional)
        Control1..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        320. Bundle.entry:condition.response.location
        Definition

        The location header created by processing this operation, populated if the operation returns a location.

        ShortThe location (if the operation returns a location)
        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        322. Bundle.entry:condition.response.etag
        Definition

        The Etag for the resource, if the operation for the entry produced a versioned resource (see Resource Metadata and Versioning and Managing Resource Contention).

        ShortThe Etag for the resource (if relevant)
        Comments

        Etags match the Resource.meta.versionId. The ETag has to match the version id in the header if a resource is included.

        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        324. Bundle.entry:condition.response.lastModified
        Definition

        The date/time that the resource was modified on the server.

        ShortServer's date time modified
        Comments

        This has to match the same time in the meta header (meta.lastUpdated) if a resource is included.

        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        326. Bundle.entry:condition.response.outcome
        Definition

        An OperationOutcome containing hints and warnings produced as part of processing this entry in a batch or transaction.

        ShortOperationOutcome with hints and warnings (for batch/transaction)
        Comments

        For a POST/PUT operation, this is the equivalent outcome that would be returned for prefer = operationoutcome - except that the resource is always returned whether or not the outcome is returned.

        This outcome is not used for error responses in batch/transaction, only for hints and warnings. In a batch operation, the error will be in Bundle.entry.response, and for transaction, there will be a single OperationOutcome instead of a bundle in the case of an error.

        Control0..1
        TypeResource
        Is Modifierfalse
        Summarytrue
        328. Bundle.entry:device
        Slice Namedevice
        Definition

        An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

        ShortEntry in the bundle - will have a resource or information
        Control0..*
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
        bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
        ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        330. Bundle.entry:device.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        332. Bundle.entry:device.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        334. Bundle.entry:device.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        336. Bundle.entry:device.link
        Definition

        A series of links that provide context to this entry.

        ShortLinks related to this entry
        Control0..*
        TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        338. Bundle.entry:device.fullUrl
        Definition

        The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

        • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
        • Results from operations might involve resources that are not identified.
        ShortURI for resource (Absolute URL server address or URI for UUID/OID)
        Comments

        fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

        Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        340. Bundle.entry:device.resource
        Definition

        The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

        ShortA resource in the bundle
        Control1..1
        TypeDevice
        Is Modifierfalse
        Summarytrue
        342. Bundle.entry:device.search
        Definition

        Information about the search process that lead to the creation of this entry.

        ShortSearch related information
        Control0..1
        This element is affected by the following invariants: bdl-2
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        344. Bundle.entry:device.search.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        346. Bundle.entry:device.search.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        348. Bundle.entry:device.search.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        350. Bundle.entry:device.search.mode
        Definition

        Why this entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

        Shortmatch | include | outcome - why this is in the result set
        Comments

        There is only one mode. In some corner cases, a resource may be included because it is both a match and an include. In these circumstances, 'match' takes precedence.

        Control0..1
        BindingThe codes SHALL be taken from SearchEntryMode
        (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

        Why an entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        352. Bundle.entry:device.search.score
        Definition

        When searching, the server's search ranking score for the entry.

        ShortSearch ranking (between 0 and 1)
        Comments

        Servers are not required to return a ranking score. 1 is most relevant, and 0 is least relevant. Often, search results are sorted by score, but the client may specify a different sort order.

        See Patient Match for the EMPI search which relates to this element.

        Control0..1
        Typedecimal
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        354. Bundle.entry:device.request
        Definition

        Additional information about how this entry should be processed as part of a transaction or batch. For history, it shows how the entry was processed to create the version contained in the entry.

        ShortAdditional execution information (transaction/batch/history)
        Control0..1
        This element is affected by the following invariants: bdl-3
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        356. Bundle.entry:device.request.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        358. Bundle.entry:device.request.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        360. Bundle.entry:device.request.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        362. Bundle.entry:device.request.method
        Definition

        In a transaction or batch, this is the HTTP action to be executed for this entry. In a history bundle, this indicates the HTTP action that occurred.

        ShortGET | HEAD | POST | PUT | DELETE | PATCH
        Control1..1
        BindingThe codes SHALL be taken from HTTPVerb
        (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

        HTTP verbs (in the HTTP command line). See HTTP rfc for details.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        364. Bundle.entry:device.request.url
        Definition

        The URL for this entry, relative to the root (the address to which the request is posted).

        ShortURL for HTTP equivalent of this entry
        Comments

        E.g. for a Patient Create, the method would be "POST" and the URL would be "Patient". For a Patient Update, the method would be PUT and the URL would be "Patient/[id]".

        Control1..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        366. Bundle.entry:device.request.ifNoneMatch
        Definition

        If the ETag values match, return a 304 Not Modified status. See the API documentation for "Conditional Read".

        ShortFor managing cache currency
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        368. Bundle.entry:device.request.ifModifiedSince
        Definition

        Only perform the operation if the last updated date matches. See the API documentation for "Conditional Read".

        ShortFor managing cache currency
        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        370. Bundle.entry:device.request.ifMatch
        Definition

        Only perform the operation if the Etag value matches. For more information, see the API section "Managing Resource Contention".

        ShortFor managing update contention
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        372. Bundle.entry:device.request.ifNoneExist
        Definition

        Instruct the server not to perform the create if a specified resource already exists. For further information, see the API documentation for "Conditional Create". This is just the query portion of the URL - what follows the "?" (not including the "?").

        ShortFor conditional creates
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        374. Bundle.entry:device.response
        Definition

        Indicates the results of processing the corresponding 'request' entry in the batch or transaction being responded to or what the results of an operation where when returning history.

        ShortResults of execution (transaction/batch/history)
        Control0..1
        This element is affected by the following invariants: bdl-4
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        376. Bundle.entry:device.response.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        378. Bundle.entry:device.response.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        380. Bundle.entry:device.response.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        382. Bundle.entry:device.response.status
        Definition

        The status code returned by processing this entry. The status SHALL start with a 3 digit HTTP code (e.g. 404) and may contain the standard HTTP description associated with the status code.

        ShortStatus response code (text optional)
        Control1..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        384. Bundle.entry:device.response.location
        Definition

        The location header created by processing this operation, populated if the operation returns a location.

        ShortThe location (if the operation returns a location)
        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        386. Bundle.entry:device.response.etag
        Definition

        The Etag for the resource, if the operation for the entry produced a versioned resource (see Resource Metadata and Versioning and Managing Resource Contention).

        ShortThe Etag for the resource (if relevant)
        Comments

        Etags match the Resource.meta.versionId. The ETag has to match the version id in the header if a resource is included.

        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        388. Bundle.entry:device.response.lastModified
        Definition

        The date/time that the resource was modified on the server.

        ShortServer's date time modified
        Comments

        This has to match the same time in the meta header (meta.lastUpdated) if a resource is included.

        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        390. Bundle.entry:device.response.outcome
        Definition

        An OperationOutcome containing hints and warnings produced as part of processing this entry in a batch or transaction.

        ShortOperationOutcome with hints and warnings (for batch/transaction)
        Comments

        For a POST/PUT operation, this is the equivalent outcome that would be returned for prefer = operationoutcome - except that the resource is always returned whether or not the outcome is returned.

        This outcome is not used for error responses in batch/transaction, only for hints and warnings. In a batch operation, the error will be in Bundle.entry.response, and for transaction, there will be a single OperationOutcome instead of a bundle in the case of an error.

        Control0..1
        TypeResource
        Is Modifierfalse
        Summarytrue
        392. Bundle.entry:deviceusestatement
        Slice Namedeviceusestatement
        Definition

        An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

        ShortEntry in the bundle - will have a resource or information
        Control0..*
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
        bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
        ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        394. Bundle.entry:deviceusestatement.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        396. Bundle.entry:deviceusestatement.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        398. Bundle.entry:deviceusestatement.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        400. Bundle.entry:deviceusestatement.link
        Definition

        A series of links that provide context to this entry.

        ShortLinks related to this entry
        Control0..*
        TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        402. Bundle.entry:deviceusestatement.fullUrl
        Definition

        The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

        • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
        • Results from operations might involve resources that are not identified.
        ShortURI for resource (Absolute URL server address or URI for UUID/OID)
        Comments

        fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

        Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        404. Bundle.entry:deviceusestatement.resource
        Definition

        A record of a device being used by a patient where the record is the result of a report from the patient or another clinician.

        ShortRecord of use of a device
        Control1..1
        TypeDeviceUseStatement(Device Use Statement (IPS))
        Is Modifierfalse
        Summaryfalse
        406. Bundle.entry:deviceusestatement.search
        Definition

        Information about the search process that lead to the creation of this entry.

        ShortSearch related information
        Control0..1
        This element is affected by the following invariants: bdl-2
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        408. Bundle.entry:deviceusestatement.search.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        410. Bundle.entry:deviceusestatement.search.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        412. Bundle.entry:deviceusestatement.search.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        414. Bundle.entry:deviceusestatement.search.mode
        Definition

        Why this entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

        Shortmatch | include | outcome - why this is in the result set
        Comments

        There is only one mode. In some corner cases, a resource may be included because it is both a match and an include. In these circumstances, 'match' takes precedence.

        Control0..1
        BindingThe codes SHALL be taken from SearchEntryMode
        (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

        Why an entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        416. Bundle.entry:deviceusestatement.search.score
        Definition

        When searching, the server's search ranking score for the entry.

        ShortSearch ranking (between 0 and 1)
        Comments

        Servers are not required to return a ranking score. 1 is most relevant, and 0 is least relevant. Often, search results are sorted by score, but the client may specify a different sort order.

        See Patient Match for the EMPI search which relates to this element.

        Control0..1
        Typedecimal
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        418. Bundle.entry:deviceusestatement.request
        Definition

        Additional information about how this entry should be processed as part of a transaction or batch. For history, it shows how the entry was processed to create the version contained in the entry.

        ShortAdditional execution information (transaction/batch/history)
        Control0..1
        This element is affected by the following invariants: bdl-3
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        420. Bundle.entry:deviceusestatement.request.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        422. Bundle.entry:deviceusestatement.request.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        424. Bundle.entry:deviceusestatement.request.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        426. Bundle.entry:deviceusestatement.request.method
        Definition

        In a transaction or batch, this is the HTTP action to be executed for this entry. In a history bundle, this indicates the HTTP action that occurred.

        ShortGET | HEAD | POST | PUT | DELETE | PATCH
        Control1..1
        BindingThe codes SHALL be taken from HTTPVerb
        (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

        HTTP verbs (in the HTTP command line). See HTTP rfc for details.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        428. Bundle.entry:deviceusestatement.request.url
        Definition

        The URL for this entry, relative to the root (the address to which the request is posted).

        ShortURL for HTTP equivalent of this entry
        Comments

        E.g. for a Patient Create, the method would be "POST" and the URL would be "Patient". For a Patient Update, the method would be PUT and the URL would be "Patient/[id]".

        Control1..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        430. Bundle.entry:deviceusestatement.request.ifNoneMatch
        Definition

        If the ETag values match, return a 304 Not Modified status. See the API documentation for "Conditional Read".

        ShortFor managing cache currency
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        432. Bundle.entry:deviceusestatement.request.ifModifiedSince
        Definition

        Only perform the operation if the last updated date matches. See the API documentation for "Conditional Read".

        ShortFor managing cache currency
        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        434. Bundle.entry:deviceusestatement.request.ifMatch
        Definition

        Only perform the operation if the Etag value matches. For more information, see the API section "Managing Resource Contention".

        ShortFor managing update contention
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        436. Bundle.entry:deviceusestatement.request.ifNoneExist
        Definition

        Instruct the server not to perform the create if a specified resource already exists. For further information, see the API documentation for "Conditional Create". This is just the query portion of the URL - what follows the "?" (not including the "?").

        ShortFor conditional creates
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        438. Bundle.entry:deviceusestatement.response
        Definition

        Indicates the results of processing the corresponding 'request' entry in the batch or transaction being responded to or what the results of an operation where when returning history.

        ShortResults of execution (transaction/batch/history)
        Control0..1
        This element is affected by the following invariants: bdl-4
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        440. Bundle.entry:deviceusestatement.response.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        442. Bundle.entry:deviceusestatement.response.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        444. Bundle.entry:deviceusestatement.response.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        446. Bundle.entry:deviceusestatement.response.status
        Definition

        The status code returned by processing this entry. The status SHALL start with a 3 digit HTTP code (e.g. 404) and may contain the standard HTTP description associated with the status code.

        ShortStatus response code (text optional)
        Control1..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        448. Bundle.entry:deviceusestatement.response.location
        Definition

        The location header created by processing this operation, populated if the operation returns a location.

        ShortThe location (if the operation returns a location)
        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        450. Bundle.entry:deviceusestatement.response.etag
        Definition

        The Etag for the resource, if the operation for the entry produced a versioned resource (see Resource Metadata and Versioning and Managing Resource Contention).

        ShortThe Etag for the resource (if relevant)
        Comments

        Etags match the Resource.meta.versionId. The ETag has to match the version id in the header if a resource is included.

        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        452. Bundle.entry:deviceusestatement.response.lastModified
        Definition

        The date/time that the resource was modified on the server.

        ShortServer's date time modified
        Comments

        This has to match the same time in the meta header (meta.lastUpdated) if a resource is included.

        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        454. Bundle.entry:deviceusestatement.response.outcome
        Definition

        An OperationOutcome containing hints and warnings produced as part of processing this entry in a batch or transaction.

        ShortOperationOutcome with hints and warnings (for batch/transaction)
        Comments

        For a POST/PUT operation, this is the equivalent outcome that would be returned for prefer = operationoutcome - except that the resource is always returned whether or not the outcome is returned.

        This outcome is not used for error responses in batch/transaction, only for hints and warnings. In a batch operation, the error will be in Bundle.entry.response, and for transaction, there will be a single OperationOutcome instead of a bundle in the case of an error.

        Control0..1
        TypeResource
        Is Modifierfalse
        Summarytrue
        456. Bundle.entry:diagnosticreport
        Slice Namediagnosticreport
        Definition

        An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

        ShortEntry in the bundle - will have a resource or information
        Control0..*
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
        bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
        ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        458. Bundle.entry:diagnosticreport.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        460. Bundle.entry:diagnosticreport.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        462. Bundle.entry:diagnosticreport.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        464. Bundle.entry:diagnosticreport.link
        Definition

        A series of links that provide context to this entry.

        ShortLinks related to this entry
        Control0..*
        TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        466. Bundle.entry:diagnosticreport.fullUrl
        Definition

        The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

        • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
        • Results from operations might involve resources that are not identified.
        ShortURI for resource (Absolute URL server address or URI for UUID/OID)
        Comments

        fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

        Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        468. Bundle.entry:diagnosticreport.resource
        Definition

        The findings and interpretation of diagnostic tests performed on patients, groups of patients, devices, and locations, and/or specimens derived from these. The report includes clinical context such as requesting and provider information, and some mix of atomic results, images, textual and coded interpretations, and formatted representation of diagnostic reports.

        ShortA Diagnostic report - a combination of request information, atomic results, images, interpretation, as well as formatted reports
        Comments

        This is intended to capture a single report and is not suitable for use in displaying summary information that covers multiple reports. For example, this resource has not been designed for laboratory cumulative reporting formats nor detailed structured reports for sequencing.

        Control1..1
        TypeDiagnosticReport(DiagnosticReport (IPS))
        Is Modifierfalse
        Summaryfalse
        Alternate NamesReport, Test, Result, Results, Labs, Laboratory
        470. Bundle.entry:diagnosticreport.search
        Definition

        Information about the search process that lead to the creation of this entry.

        ShortSearch related information
        Control0..1
        This element is affected by the following invariants: bdl-2
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        472. Bundle.entry:diagnosticreport.search.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        474. Bundle.entry:diagnosticreport.search.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        476. Bundle.entry:diagnosticreport.search.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        478. Bundle.entry:diagnosticreport.search.mode
        Definition

        Why this entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

        Shortmatch | include | outcome - why this is in the result set
        Comments

        There is only one mode. In some corner cases, a resource may be included because it is both a match and an include. In these circumstances, 'match' takes precedence.

        Control0..1
        BindingThe codes SHALL be taken from SearchEntryMode
        (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

        Why an entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        480. Bundle.entry:diagnosticreport.search.score
        Definition

        When searching, the server's search ranking score for the entry.

        ShortSearch ranking (between 0 and 1)
        Comments

        Servers are not required to return a ranking score. 1 is most relevant, and 0 is least relevant. Often, search results are sorted by score, but the client may specify a different sort order.

        See Patient Match for the EMPI search which relates to this element.

        Control0..1
        Typedecimal
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        482. Bundle.entry:diagnosticreport.request
        Definition

        Additional information about how this entry should be processed as part of a transaction or batch. For history, it shows how the entry was processed to create the version contained in the entry.

        ShortAdditional execution information (transaction/batch/history)
        Control0..1
        This element is affected by the following invariants: bdl-3
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        484. Bundle.entry:diagnosticreport.request.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        486. Bundle.entry:diagnosticreport.request.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        488. Bundle.entry:diagnosticreport.request.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        490. Bundle.entry:diagnosticreport.request.method
        Definition

        In a transaction or batch, this is the HTTP action to be executed for this entry. In a history bundle, this indicates the HTTP action that occurred.

        ShortGET | HEAD | POST | PUT | DELETE | PATCH
        Control1..1
        BindingThe codes SHALL be taken from HTTPVerb
        (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

        HTTP verbs (in the HTTP command line). See HTTP rfc for details.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        492. Bundle.entry:diagnosticreport.request.url
        Definition

        The URL for this entry, relative to the root (the address to which the request is posted).

        ShortURL for HTTP equivalent of this entry
        Comments

        E.g. for a Patient Create, the method would be "POST" and the URL would be "Patient". For a Patient Update, the method would be PUT and the URL would be "Patient/[id]".

        Control1..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        494. Bundle.entry:diagnosticreport.request.ifNoneMatch
        Definition

        If the ETag values match, return a 304 Not Modified status. See the API documentation for "Conditional Read".

        ShortFor managing cache currency
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        496. Bundle.entry:diagnosticreport.request.ifModifiedSince
        Definition

        Only perform the operation if the last updated date matches. See the API documentation for "Conditional Read".

        ShortFor managing cache currency
        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        498. Bundle.entry:diagnosticreport.request.ifMatch
        Definition

        Only perform the operation if the Etag value matches. For more information, see the API section "Managing Resource Contention".

        ShortFor managing update contention
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        500. Bundle.entry:diagnosticreport.request.ifNoneExist
        Definition

        Instruct the server not to perform the create if a specified resource already exists. For further information, see the API documentation for "Conditional Create". This is just the query portion of the URL - what follows the "?" (not including the "?").

        ShortFor conditional creates
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        502. Bundle.entry:diagnosticreport.response
        Definition

        Indicates the results of processing the corresponding 'request' entry in the batch or transaction being responded to or what the results of an operation where when returning history.

        ShortResults of execution (transaction/batch/history)
        Control0..1
        This element is affected by the following invariants: bdl-4
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        504. Bundle.entry:diagnosticreport.response.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        506. Bundle.entry:diagnosticreport.response.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        508. Bundle.entry:diagnosticreport.response.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        510. Bundle.entry:diagnosticreport.response.status
        Definition

        The status code returned by processing this entry. The status SHALL start with a 3 digit HTTP code (e.g. 404) and may contain the standard HTTP description associated with the status code.

        ShortStatus response code (text optional)
        Control1..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        512. Bundle.entry:diagnosticreport.response.location
        Definition

        The location header created by processing this operation, populated if the operation returns a location.

        ShortThe location (if the operation returns a location)
        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        514. Bundle.entry:diagnosticreport.response.etag
        Definition

        The Etag for the resource, if the operation for the entry produced a versioned resource (see Resource Metadata and Versioning and Managing Resource Contention).

        ShortThe Etag for the resource (if relevant)
        Comments

        Etags match the Resource.meta.versionId. The ETag has to match the version id in the header if a resource is included.

        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        516. Bundle.entry:diagnosticreport.response.lastModified
        Definition

        The date/time that the resource was modified on the server.

        ShortServer's date time modified
        Comments

        This has to match the same time in the meta header (meta.lastUpdated) if a resource is included.

        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        518. Bundle.entry:diagnosticreport.response.outcome
        Definition

        An OperationOutcome containing hints and warnings produced as part of processing this entry in a batch or transaction.

        ShortOperationOutcome with hints and warnings (for batch/transaction)
        Comments

        For a POST/PUT operation, this is the equivalent outcome that would be returned for prefer = operationoutcome - except that the resource is always returned whether or not the outcome is returned.

        This outcome is not used for error responses in batch/transaction, only for hints and warnings. In a batch operation, the error will be in Bundle.entry.response, and for transaction, there will be a single OperationOutcome instead of a bundle in the case of an error.

        Control0..1
        TypeResource
        Is Modifierfalse
        Summarytrue
        520. Bundle.entry:imagingstudy
        Slice Nameimagingstudy
        Definition

        An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

        ShortEntry in the bundle - will have a resource or information
        Control0..*
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
        bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
        ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        522. Bundle.entry:imagingstudy.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        524. Bundle.entry:imagingstudy.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        526. Bundle.entry:imagingstudy.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        528. Bundle.entry:imagingstudy.link
        Definition

        A series of links that provide context to this entry.

        ShortLinks related to this entry
        Control0..*
        TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        530. Bundle.entry:imagingstudy.fullUrl
        Definition

        The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

        • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
        • Results from operations might involve resources that are not identified.
        ShortURI for resource (Absolute URL server address or URI for UUID/OID)
        Comments

        fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

        Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        532. Bundle.entry:imagingstudy.resource
        Definition

        Representation of the content produced in a DICOM imaging study. A study comprises a set of series, each of which includes a set of Service-Object Pair Instances (SOP Instances - images or other data) acquired or produced in a common context. A series is of only one modality (e.g. X-ray, CT, MR, ultrasound), but a study may have multiple series of different modalities.

        ShortA set of images produced in single study (one or more series of references images)
        Control1..1
        TypeImagingStudy(Imaging Study (IPS))
        Is Modifierfalse
        Summaryfalse
        534. Bundle.entry:imagingstudy.search
        Definition

        Information about the search process that lead to the creation of this entry.

        ShortSearch related information
        Control0..1
        This element is affected by the following invariants: bdl-2
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        536. Bundle.entry:imagingstudy.search.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        538. Bundle.entry:imagingstudy.search.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        540. Bundle.entry:imagingstudy.search.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        542. Bundle.entry:imagingstudy.search.mode
        Definition

        Why this entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

        Shortmatch | include | outcome - why this is in the result set
        Comments

        There is only one mode. In some corner cases, a resource may be included because it is both a match and an include. In these circumstances, 'match' takes precedence.

        Control0..1
        BindingThe codes SHALL be taken from SearchEntryMode
        (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

        Why an entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        544. Bundle.entry:imagingstudy.search.score
        Definition

        When searching, the server's search ranking score for the entry.

        ShortSearch ranking (between 0 and 1)
        Comments

        Servers are not required to return a ranking score. 1 is most relevant, and 0 is least relevant. Often, search results are sorted by score, but the client may specify a different sort order.

        See Patient Match for the EMPI search which relates to this element.

        Control0..1
        Typedecimal
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        546. Bundle.entry:imagingstudy.request
        Definition

        Additional information about how this entry should be processed as part of a transaction or batch. For history, it shows how the entry was processed to create the version contained in the entry.

        ShortAdditional execution information (transaction/batch/history)
        Control0..1
        This element is affected by the following invariants: bdl-3
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        548. Bundle.entry:imagingstudy.request.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        550. Bundle.entry:imagingstudy.request.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        552. Bundle.entry:imagingstudy.request.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        554. Bundle.entry:imagingstudy.request.method
        Definition

        In a transaction or batch, this is the HTTP action to be executed for this entry. In a history bundle, this indicates the HTTP action that occurred.

        ShortGET | HEAD | POST | PUT | DELETE | PATCH
        Control1..1
        BindingThe codes SHALL be taken from HTTPVerb
        (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

        HTTP verbs (in the HTTP command line). See HTTP rfc for details.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        556. Bundle.entry:imagingstudy.request.url
        Definition

        The URL for this entry, relative to the root (the address to which the request is posted).

        ShortURL for HTTP equivalent of this entry
        Comments

        E.g. for a Patient Create, the method would be "POST" and the URL would be "Patient". For a Patient Update, the method would be PUT and the URL would be "Patient/[id]".

        Control1..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        558. Bundle.entry:imagingstudy.request.ifNoneMatch
        Definition

        If the ETag values match, return a 304 Not Modified status. See the API documentation for "Conditional Read".

        ShortFor managing cache currency
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        560. Bundle.entry:imagingstudy.request.ifModifiedSince
        Definition

        Only perform the operation if the last updated date matches. See the API documentation for "Conditional Read".

        ShortFor managing cache currency
        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        562. Bundle.entry:imagingstudy.request.ifMatch
        Definition

        Only perform the operation if the Etag value matches. For more information, see the API section "Managing Resource Contention".

        ShortFor managing update contention
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        564. Bundle.entry:imagingstudy.request.ifNoneExist
        Definition

        Instruct the server not to perform the create if a specified resource already exists. For further information, see the API documentation for "Conditional Create". This is just the query portion of the URL - what follows the "?" (not including the "?").

        ShortFor conditional creates
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        566. Bundle.entry:imagingstudy.response
        Definition

        Indicates the results of processing the corresponding 'request' entry in the batch or transaction being responded to or what the results of an operation where when returning history.

        ShortResults of execution (transaction/batch/history)
        Control0..1
        This element is affected by the following invariants: bdl-4
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        568. Bundle.entry:imagingstudy.response.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        570. Bundle.entry:imagingstudy.response.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        572. Bundle.entry:imagingstudy.response.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        574. Bundle.entry:imagingstudy.response.status
        Definition

        The status code returned by processing this entry. The status SHALL start with a 3 digit HTTP code (e.g. 404) and may contain the standard HTTP description associated with the status code.

        ShortStatus response code (text optional)
        Control1..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        576. Bundle.entry:imagingstudy.response.location
        Definition

        The location header created by processing this operation, populated if the operation returns a location.

        ShortThe location (if the operation returns a location)
        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        578. Bundle.entry:imagingstudy.response.etag
        Definition

        The Etag for the resource, if the operation for the entry produced a versioned resource (see Resource Metadata and Versioning and Managing Resource Contention).

        ShortThe Etag for the resource (if relevant)
        Comments

        Etags match the Resource.meta.versionId. The ETag has to match the version id in the header if a resource is included.

        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        580. Bundle.entry:imagingstudy.response.lastModified
        Definition

        The date/time that the resource was modified on the server.

        ShortServer's date time modified
        Comments

        This has to match the same time in the meta header (meta.lastUpdated) if a resource is included.

        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        582. Bundle.entry:imagingstudy.response.outcome
        Definition

        An OperationOutcome containing hints and warnings produced as part of processing this entry in a batch or transaction.

        ShortOperationOutcome with hints and warnings (for batch/transaction)
        Comments

        For a POST/PUT operation, this is the equivalent outcome that would be returned for prefer = operationoutcome - except that the resource is always returned whether or not the outcome is returned.

        This outcome is not used for error responses in batch/transaction, only for hints and warnings. In a batch operation, the error will be in Bundle.entry.response, and for transaction, there will be a single OperationOutcome instead of a bundle in the case of an error.

        Control0..1
        TypeResource
        Is Modifierfalse
        Summarytrue
        584. Bundle.entry:immunization
        Slice Nameimmunization
        Definition

        An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

        ShortEntry in the bundle - will have a resource or information
        Control0..*
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
        bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
        ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        586. Bundle.entry:immunization.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        588. Bundle.entry:immunization.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        590. Bundle.entry:immunization.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        592. Bundle.entry:immunization.link
        Definition

        A series of links that provide context to this entry.

        ShortLinks related to this entry
        Control0..*
        TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        594. Bundle.entry:immunization.fullUrl
        Definition

        The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

        • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
        • Results from operations might involve resources that are not identified.
        ShortURI for resource (Absolute URL server address or URI for UUID/OID)
        Comments

        fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

        Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        596. Bundle.entry:immunization.resource
        Definition

        Describes the event of a patient being administered a vaccination or a record of a vaccination as reported by a patient, a clinician or another party and may include vaccine reaction information and what vaccination protocol was followed

        ShortImmunization event information
        Control1..1
        TypeImmunization(Immunization (IPS))
        Is Modifierfalse
        Summaryfalse
        598. Bundle.entry:immunization.search
        Definition

        Information about the search process that lead to the creation of this entry.

        ShortSearch related information
        Control0..1
        This element is affected by the following invariants: bdl-2
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        600. Bundle.entry:immunization.search.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        602. Bundle.entry:immunization.search.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        604. Bundle.entry:immunization.search.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        606. Bundle.entry:immunization.search.mode
        Definition

        Why this entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

        Shortmatch | include | outcome - why this is in the result set
        Comments

        There is only one mode. In some corner cases, a resource may be included because it is both a match and an include. In these circumstances, 'match' takes precedence.

        Control0..1
        BindingThe codes SHALL be taken from SearchEntryMode
        (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

        Why an entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        608. Bundle.entry:immunization.search.score
        Definition

        When searching, the server's search ranking score for the entry.

        ShortSearch ranking (between 0 and 1)
        Comments

        Servers are not required to return a ranking score. 1 is most relevant, and 0 is least relevant. Often, search results are sorted by score, but the client may specify a different sort order.

        See Patient Match for the EMPI search which relates to this element.

        Control0..1
        Typedecimal
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        610. Bundle.entry:immunization.request
        Definition

        Additional information about how this entry should be processed as part of a transaction or batch. For history, it shows how the entry was processed to create the version contained in the entry.

        ShortAdditional execution information (transaction/batch/history)
        Control0..1
        This element is affected by the following invariants: bdl-3
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        612. Bundle.entry:immunization.request.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        614. Bundle.entry:immunization.request.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        616. Bundle.entry:immunization.request.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        618. Bundle.entry:immunization.request.method
        Definition

        In a transaction or batch, this is the HTTP action to be executed for this entry. In a history bundle, this indicates the HTTP action that occurred.

        ShortGET | HEAD | POST | PUT | DELETE | PATCH
        Control1..1
        BindingThe codes SHALL be taken from HTTPVerb
        (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

        HTTP verbs (in the HTTP command line). See HTTP rfc for details.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        620. Bundle.entry:immunization.request.url
        Definition

        The URL for this entry, relative to the root (the address to which the request is posted).

        ShortURL for HTTP equivalent of this entry
        Comments

        E.g. for a Patient Create, the method would be "POST" and the URL would be "Patient". For a Patient Update, the method would be PUT and the URL would be "Patient/[id]".

        Control1..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        622. Bundle.entry:immunization.request.ifNoneMatch
        Definition

        If the ETag values match, return a 304 Not Modified status. See the API documentation for "Conditional Read".

        ShortFor managing cache currency
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        624. Bundle.entry:immunization.request.ifModifiedSince
        Definition

        Only perform the operation if the last updated date matches. See the API documentation for "Conditional Read".

        ShortFor managing cache currency
        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        626. Bundle.entry:immunization.request.ifMatch
        Definition

        Only perform the operation if the Etag value matches. For more information, see the API section "Managing Resource Contention".

        ShortFor managing update contention
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        628. Bundle.entry:immunization.request.ifNoneExist
        Definition

        Instruct the server not to perform the create if a specified resource already exists. For further information, see the API documentation for "Conditional Create". This is just the query portion of the URL - what follows the "?" (not including the "?").

        ShortFor conditional creates
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        630. Bundle.entry:immunization.response
        Definition

        Indicates the results of processing the corresponding 'request' entry in the batch or transaction being responded to or what the results of an operation where when returning history.

        ShortResults of execution (transaction/batch/history)
        Control0..1
        This element is affected by the following invariants: bdl-4
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        632. Bundle.entry:immunization.response.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        634. Bundle.entry:immunization.response.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        636. Bundle.entry:immunization.response.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        638. Bundle.entry:immunization.response.status
        Definition

        The status code returned by processing this entry. The status SHALL start with a 3 digit HTTP code (e.g. 404) and may contain the standard HTTP description associated with the status code.

        ShortStatus response code (text optional)
        Control1..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        640. Bundle.entry:immunization.response.location
        Definition

        The location header created by processing this operation, populated if the operation returns a location.

        ShortThe location (if the operation returns a location)
        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        642. Bundle.entry:immunization.response.etag
        Definition

        The Etag for the resource, if the operation for the entry produced a versioned resource (see Resource Metadata and Versioning and Managing Resource Contention).

        ShortThe Etag for the resource (if relevant)
        Comments

        Etags match the Resource.meta.versionId. The ETag has to match the version id in the header if a resource is included.

        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        644. Bundle.entry:immunization.response.lastModified
        Definition

        The date/time that the resource was modified on the server.

        ShortServer's date time modified
        Comments

        This has to match the same time in the meta header (meta.lastUpdated) if a resource is included.

        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        646. Bundle.entry:immunization.response.outcome
        Definition

        An OperationOutcome containing hints and warnings produced as part of processing this entry in a batch or transaction.

        ShortOperationOutcome with hints and warnings (for batch/transaction)
        Comments

        For a POST/PUT operation, this is the equivalent outcome that would be returned for prefer = operationoutcome - except that the resource is always returned whether or not the outcome is returned.

        This outcome is not used for error responses in batch/transaction, only for hints and warnings. In a batch operation, the error will be in Bundle.entry.response, and for transaction, there will be a single OperationOutcome instead of a bundle in the case of an error.

        Control0..1
        TypeResource
        Is Modifierfalse
        Summarytrue
        648. Bundle.entry:medication
        Slice Namemedication
        Definition

        An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

        ShortEntry in the bundle - will have a resource or information
        Control0..*
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
        bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
        ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        650. Bundle.entry:medication.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        652. Bundle.entry:medication.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        654. Bundle.entry:medication.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        656. Bundle.entry:medication.link
        Definition

        A series of links that provide context to this entry.

        ShortLinks related to this entry
        Control0..*
        TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        658. Bundle.entry:medication.fullUrl
        Definition

        The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

        • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
        • Results from operations might involve resources that are not identified.
        ShortURI for resource (Absolute URL server address or URI for UUID/OID)
        Comments

        fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

        Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        660. Bundle.entry:medication.resource
        Definition

        This resource is primarily used for the identification and definition of a medication for the purposes of prescribing, dispensing, and administering a medication as well as for making statements about medication use.

        ShortDefinition of a Medication
        Comments

        IPS Medication

        Control1..1
        TypeMedication(Medication (IPS))
        Is Modifierfalse
        Summaryfalse
        662. Bundle.entry:medication.search
        Definition

        Information about the search process that lead to the creation of this entry.

        ShortSearch related information
        Control0..1
        This element is affected by the following invariants: bdl-2
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        664. Bundle.entry:medication.search.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        666. Bundle.entry:medication.search.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        668. Bundle.entry:medication.search.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        670. Bundle.entry:medication.search.mode
        Definition

        Why this entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

        Shortmatch | include | outcome - why this is in the result set
        Comments

        There is only one mode. In some corner cases, a resource may be included because it is both a match and an include. In these circumstances, 'match' takes precedence.

        Control0..1
        BindingThe codes SHALL be taken from SearchEntryMode
        (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

        Why an entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        672. Bundle.entry:medication.search.score
        Definition

        When searching, the server's search ranking score for the entry.

        ShortSearch ranking (between 0 and 1)
        Comments

        Servers are not required to return a ranking score. 1 is most relevant, and 0 is least relevant. Often, search results are sorted by score, but the client may specify a different sort order.

        See Patient Match for the EMPI search which relates to this element.

        Control0..1
        Typedecimal
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        674. Bundle.entry:medication.request
        Definition

        Additional information about how this entry should be processed as part of a transaction or batch. For history, it shows how the entry was processed to create the version contained in the entry.

        ShortAdditional execution information (transaction/batch/history)
        Control0..1
        This element is affected by the following invariants: bdl-3
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        676. Bundle.entry:medication.request.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        678. Bundle.entry:medication.request.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        680. Bundle.entry:medication.request.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        682. Bundle.entry:medication.request.method
        Definition

        In a transaction or batch, this is the HTTP action to be executed for this entry. In a history bundle, this indicates the HTTP action that occurred.

        ShortGET | HEAD | POST | PUT | DELETE | PATCH
        Control1..1
        BindingThe codes SHALL be taken from HTTPVerb
        (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

        HTTP verbs (in the HTTP command line). See HTTP rfc for details.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        684. Bundle.entry:medication.request.url
        Definition

        The URL for this entry, relative to the root (the address to which the request is posted).

        ShortURL for HTTP equivalent of this entry
        Comments

        E.g. for a Patient Create, the method would be "POST" and the URL would be "Patient". For a Patient Update, the method would be PUT and the URL would be "Patient/[id]".

        Control1..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        686. Bundle.entry:medication.request.ifNoneMatch
        Definition

        If the ETag values match, return a 304 Not Modified status. See the API documentation for "Conditional Read".

        ShortFor managing cache currency
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        688. Bundle.entry:medication.request.ifModifiedSince
        Definition

        Only perform the operation if the last updated date matches. See the API documentation for "Conditional Read".

        ShortFor managing cache currency
        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        690. Bundle.entry:medication.request.ifMatch
        Definition

        Only perform the operation if the Etag value matches. For more information, see the API section "Managing Resource Contention".

        ShortFor managing update contention
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        692. Bundle.entry:medication.request.ifNoneExist
        Definition

        Instruct the server not to perform the create if a specified resource already exists. For further information, see the API documentation for "Conditional Create". This is just the query portion of the URL - what follows the "?" (not including the "?").

        ShortFor conditional creates
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        694. Bundle.entry:medication.response
        Definition

        Indicates the results of processing the corresponding 'request' entry in the batch or transaction being responded to or what the results of an operation where when returning history.

        ShortResults of execution (transaction/batch/history)
        Control0..1
        This element is affected by the following invariants: bdl-4
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        696. Bundle.entry:medication.response.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        698. Bundle.entry:medication.response.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        700. Bundle.entry:medication.response.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        702. Bundle.entry:medication.response.status
        Definition

        The status code returned by processing this entry. The status SHALL start with a 3 digit HTTP code (e.g. 404) and may contain the standard HTTP description associated with the status code.

        ShortStatus response code (text optional)
        Control1..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        704. Bundle.entry:medication.response.location
        Definition

        The location header created by processing this operation, populated if the operation returns a location.

        ShortThe location (if the operation returns a location)
        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        706. Bundle.entry:medication.response.etag
        Definition

        The Etag for the resource, if the operation for the entry produced a versioned resource (see Resource Metadata and Versioning and Managing Resource Contention).

        ShortThe Etag for the resource (if relevant)
        Comments

        Etags match the Resource.meta.versionId. The ETag has to match the version id in the header if a resource is included.

        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        708. Bundle.entry:medication.response.lastModified
        Definition

        The date/time that the resource was modified on the server.

        ShortServer's date time modified
        Comments

        This has to match the same time in the meta header (meta.lastUpdated) if a resource is included.

        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        710. Bundle.entry:medication.response.outcome
        Definition

        An OperationOutcome containing hints and warnings produced as part of processing this entry in a batch or transaction.

        ShortOperationOutcome with hints and warnings (for batch/transaction)
        Comments

        For a POST/PUT operation, this is the equivalent outcome that would be returned for prefer = operationoutcome - except that the resource is always returned whether or not the outcome is returned.

        This outcome is not used for error responses in batch/transaction, only for hints and warnings. In a batch operation, the error will be in Bundle.entry.response, and for transaction, there will be a single OperationOutcome instead of a bundle in the case of an error.

        Control0..1
        TypeResource
        Is Modifierfalse
        Summarytrue
        712. Bundle.entry:medicationrequest
        Slice Namemedicationrequest
        Definition

        An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

        ShortEntry in the bundle - will have a resource or information
        Control0..*
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
        bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
        ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        714. Bundle.entry:medicationrequest.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        716. Bundle.entry:medicationrequest.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        718. Bundle.entry:medicationrequest.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        720. Bundle.entry:medicationrequest.link
        Definition

        A series of links that provide context to this entry.

        ShortLinks related to this entry
        Control0..*
        TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        722. Bundle.entry:medicationrequest.fullUrl
        Definition

        The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

        • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
        • Results from operations might involve resources that are not identified.
        ShortURI for resource (Absolute URL server address or URI for UUID/OID)
        Comments

        fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

        Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        724. Bundle.entry:medicationrequest.resource
        Definition

        An order or request for both supply of the medication and the instructions for administration of the medication to a patient. The resource is called "MedicationRequest" rather than "MedicationPrescription" or "MedicationOrder" to generalize the use across inpatient and outpatient settings, including care plans, etc., and to harmonize with workflow patterns.

        ShortOrdering of medication for patient or group
        Control1..1
        TypeMedicationRequest(Medication Request (IPS))
        Is Modifierfalse
        Summaryfalse
        Alternate NamesPrescription, Order
        726. Bundle.entry:medicationrequest.search
        Definition

        Information about the search process that lead to the creation of this entry.

        ShortSearch related information
        Control0..1
        This element is affected by the following invariants: bdl-2
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        728. Bundle.entry:medicationrequest.search.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        730. Bundle.entry:medicationrequest.search.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        732. Bundle.entry:medicationrequest.search.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        734. Bundle.entry:medicationrequest.search.mode
        Definition

        Why this entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

        Shortmatch | include | outcome - why this is in the result set
        Comments

        There is only one mode. In some corner cases, a resource may be included because it is both a match and an include. In these circumstances, 'match' takes precedence.

        Control0..1
        BindingThe codes SHALL be taken from SearchEntryMode
        (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

        Why an entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        736. Bundle.entry:medicationrequest.search.score
        Definition

        When searching, the server's search ranking score for the entry.

        ShortSearch ranking (between 0 and 1)
        Comments

        Servers are not required to return a ranking score. 1 is most relevant, and 0 is least relevant. Often, search results are sorted by score, but the client may specify a different sort order.

        See Patient Match for the EMPI search which relates to this element.

        Control0..1
        Typedecimal
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        738. Bundle.entry:medicationrequest.request
        Definition

        Additional information about how this entry should be processed as part of a transaction or batch. For history, it shows how the entry was processed to create the version contained in the entry.

        ShortAdditional execution information (transaction/batch/history)
        Control0..1
        This element is affected by the following invariants: bdl-3
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        740. Bundle.entry:medicationrequest.request.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        742. Bundle.entry:medicationrequest.request.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        744. Bundle.entry:medicationrequest.request.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        746. Bundle.entry:medicationrequest.request.method
        Definition

        In a transaction or batch, this is the HTTP action to be executed for this entry. In a history bundle, this indicates the HTTP action that occurred.

        ShortGET | HEAD | POST | PUT | DELETE | PATCH
        Control1..1
        BindingThe codes SHALL be taken from HTTPVerb
        (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

        HTTP verbs (in the HTTP command line). See HTTP rfc for details.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        748. Bundle.entry:medicationrequest.request.url
        Definition

        The URL for this entry, relative to the root (the address to which the request is posted).

        ShortURL for HTTP equivalent of this entry
        Comments

        E.g. for a Patient Create, the method would be "POST" and the URL would be "Patient". For a Patient Update, the method would be PUT and the URL would be "Patient/[id]".

        Control1..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        750. Bundle.entry:medicationrequest.request.ifNoneMatch
        Definition

        If the ETag values match, return a 304 Not Modified status. See the API documentation for "Conditional Read".

        ShortFor managing cache currency
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        752. Bundle.entry:medicationrequest.request.ifModifiedSince
        Definition

        Only perform the operation if the last updated date matches. See the API documentation for "Conditional Read".

        ShortFor managing cache currency
        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        754. Bundle.entry:medicationrequest.request.ifMatch
        Definition

        Only perform the operation if the Etag value matches. For more information, see the API section "Managing Resource Contention".

        ShortFor managing update contention
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        756. Bundle.entry:medicationrequest.request.ifNoneExist
        Definition

        Instruct the server not to perform the create if a specified resource already exists. For further information, see the API documentation for "Conditional Create". This is just the query portion of the URL - what follows the "?" (not including the "?").

        ShortFor conditional creates
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        758. Bundle.entry:medicationrequest.response
        Definition

        Indicates the results of processing the corresponding 'request' entry in the batch or transaction being responded to or what the results of an operation where when returning history.

        ShortResults of execution (transaction/batch/history)
        Control0..1
        This element is affected by the following invariants: bdl-4
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        760. Bundle.entry:medicationrequest.response.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        762. Bundle.entry:medicationrequest.response.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        764. Bundle.entry:medicationrequest.response.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        766. Bundle.entry:medicationrequest.response.status
        Definition

        The status code returned by processing this entry. The status SHALL start with a 3 digit HTTP code (e.g. 404) and may contain the standard HTTP description associated with the status code.

        ShortStatus response code (text optional)
        Control1..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        768. Bundle.entry:medicationrequest.response.location
        Definition

        The location header created by processing this operation, populated if the operation returns a location.

        ShortThe location (if the operation returns a location)
        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        770. Bundle.entry:medicationrequest.response.etag
        Definition

        The Etag for the resource, if the operation for the entry produced a versioned resource (see Resource Metadata and Versioning and Managing Resource Contention).

        ShortThe Etag for the resource (if relevant)
        Comments

        Etags match the Resource.meta.versionId. The ETag has to match the version id in the header if a resource is included.

        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        772. Bundle.entry:medicationrequest.response.lastModified
        Definition

        The date/time that the resource was modified on the server.

        ShortServer's date time modified
        Comments

        This has to match the same time in the meta header (meta.lastUpdated) if a resource is included.

        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        774. Bundle.entry:medicationrequest.response.outcome
        Definition

        An OperationOutcome containing hints and warnings produced as part of processing this entry in a batch or transaction.

        ShortOperationOutcome with hints and warnings (for batch/transaction)
        Comments

        For a POST/PUT operation, this is the equivalent outcome that would be returned for prefer = operationoutcome - except that the resource is always returned whether or not the outcome is returned.

        This outcome is not used for error responses in batch/transaction, only for hints and warnings. In a batch operation, the error will be in Bundle.entry.response, and for transaction, there will be a single OperationOutcome instead of a bundle in the case of an error.

        Control0..1
        TypeResource
        Is Modifierfalse
        Summarytrue
        776. Bundle.entry:medicationstatement
        Slice Namemedicationstatement
        Definition

        An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

        ShortEntry in the bundle - will have a resource or information
        Control0..*
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
        bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
        ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        778. Bundle.entry:medicationstatement.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        780. Bundle.entry:medicationstatement.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        782. Bundle.entry:medicationstatement.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        784. Bundle.entry:medicationstatement.link
        Definition

        A series of links that provide context to this entry.

        ShortLinks related to this entry
        Control0..*
        TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        786. Bundle.entry:medicationstatement.fullUrl
        Definition

        The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

        • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
        • Results from operations might involve resources that are not identified.
        ShortURI for resource (Absolute URL server address or URI for UUID/OID)
        Comments

        fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

        Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        788. Bundle.entry:medicationstatement.resource
        Definition

        A record of a medication that is being consumed by a patient. A MedicationStatement may indicate that the patient may be taking the medication now or has taken the medication in the past or will be taking the medication in the future. The source of this information can be the patient, significant other (such as a family member or spouse), or a clinician. A common scenario where this information is captured is during the history taking process during a patient visit or stay. The medication information may come from sources such as the patient's memory, from a prescription bottle, or from a list of medications the patient, clinician or other party maintains.

        The primary difference between a medication statement and a medication administration is that the medication administration has complete administration information and is based on actual administration information from the person who administered the medication. A medication statement is often, if not always, less specific. There is no required date/time when the medication was administered, in fact we only know that a source has reported the patient is taking this medication, where details such as time, quantity, or rate or even medication product may be incomplete or missing or less precise. As stated earlier, the medication statement information may come from the patient's memory, from a prescription bottle or from a list of medications the patient, clinician or other party maintains. Medication administration is more formal and is not missing detailed information.

        ShortRecord of medication being taken by a patient
        Comments

        When interpreting a medicationStatement, the value of the status and NotTaken needed to be considered: MedicationStatement.status + MedicationStatement.wasNotTaken Status=Active + NotTaken=T = Not currently taking Status=Completed + NotTaken=T = Not taken in the past Status=Intended + NotTaken=T = No intention of taking Status=Active + NotTaken=F = Taking, but not as prescribed Status=Active + NotTaken=F = Taking Status=Intended +NotTaken= F = Will be taking (not started) Status=Completed + NotTaken=F = Taken in past Status=In Error + NotTaken=N/A = In Error.

        Control1..1
        TypeMedicationStatement(Medication Statement (IPS))
        Is Modifierfalse
        Summaryfalse
        790. Bundle.entry:medicationstatement.search
        Definition

        Information about the search process that lead to the creation of this entry.

        ShortSearch related information
        Control0..1
        This element is affected by the following invariants: bdl-2
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        792. Bundle.entry:medicationstatement.search.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        794. Bundle.entry:medicationstatement.search.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        796. Bundle.entry:medicationstatement.search.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        798. Bundle.entry:medicationstatement.search.mode
        Definition

        Why this entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

        Shortmatch | include | outcome - why this is in the result set
        Comments

        There is only one mode. In some corner cases, a resource may be included because it is both a match and an include. In these circumstances, 'match' takes precedence.

        Control0..1
        BindingThe codes SHALL be taken from SearchEntryMode
        (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

        Why an entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        800. Bundle.entry:medicationstatement.search.score
        Definition

        When searching, the server's search ranking score for the entry.

        ShortSearch ranking (between 0 and 1)
        Comments

        Servers are not required to return a ranking score. 1 is most relevant, and 0 is least relevant. Often, search results are sorted by score, but the client may specify a different sort order.

        See Patient Match for the EMPI search which relates to this element.

        Control0..1
        Typedecimal
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        802. Bundle.entry:medicationstatement.request
        Definition

        Additional information about how this entry should be processed as part of a transaction or batch. For history, it shows how the entry was processed to create the version contained in the entry.

        ShortAdditional execution information (transaction/batch/history)
        Control0..1
        This element is affected by the following invariants: bdl-3
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        804. Bundle.entry:medicationstatement.request.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        806. Bundle.entry:medicationstatement.request.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        808. Bundle.entry:medicationstatement.request.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        810. Bundle.entry:medicationstatement.request.method
        Definition

        In a transaction or batch, this is the HTTP action to be executed for this entry. In a history bundle, this indicates the HTTP action that occurred.

        ShortGET | HEAD | POST | PUT | DELETE | PATCH
        Control1..1
        BindingThe codes SHALL be taken from HTTPVerb
        (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

        HTTP verbs (in the HTTP command line). See HTTP rfc for details.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        812. Bundle.entry:medicationstatement.request.url
        Definition

        The URL for this entry, relative to the root (the address to which the request is posted).

        ShortURL for HTTP equivalent of this entry
        Comments

        E.g. for a Patient Create, the method would be "POST" and the URL would be "Patient". For a Patient Update, the method would be PUT and the URL would be "Patient/[id]".

        Control1..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        814. Bundle.entry:medicationstatement.request.ifNoneMatch
        Definition

        If the ETag values match, return a 304 Not Modified status. See the API documentation for "Conditional Read".

        ShortFor managing cache currency
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        816. Bundle.entry:medicationstatement.request.ifModifiedSince
        Definition

        Only perform the operation if the last updated date matches. See the API documentation for "Conditional Read".

        ShortFor managing cache currency
        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        818. Bundle.entry:medicationstatement.request.ifMatch
        Definition

        Only perform the operation if the Etag value matches. For more information, see the API section "Managing Resource Contention".

        ShortFor managing update contention
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        820. Bundle.entry:medicationstatement.request.ifNoneExist
        Definition

        Instruct the server not to perform the create if a specified resource already exists. For further information, see the API documentation for "Conditional Create". This is just the query portion of the URL - what follows the "?" (not including the "?").

        ShortFor conditional creates
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        822. Bundle.entry:medicationstatement.response
        Definition

        Indicates the results of processing the corresponding 'request' entry in the batch or transaction being responded to or what the results of an operation where when returning history.

        ShortResults of execution (transaction/batch/history)
        Control0..1
        This element is affected by the following invariants: bdl-4
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        824. Bundle.entry:medicationstatement.response.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        826. Bundle.entry:medicationstatement.response.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        828. Bundle.entry:medicationstatement.response.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        830. Bundle.entry:medicationstatement.response.status
        Definition

        The status code returned by processing this entry. The status SHALL start with a 3 digit HTTP code (e.g. 404) and may contain the standard HTTP description associated with the status code.

        ShortStatus response code (text optional)
        Control1..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        832. Bundle.entry:medicationstatement.response.location
        Definition

        The location header created by processing this operation, populated if the operation returns a location.

        ShortThe location (if the operation returns a location)
        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        834. Bundle.entry:medicationstatement.response.etag
        Definition

        The Etag for the resource, if the operation for the entry produced a versioned resource (see Resource Metadata and Versioning and Managing Resource Contention).

        ShortThe Etag for the resource (if relevant)
        Comments

        Etags match the Resource.meta.versionId. The ETag has to match the version id in the header if a resource is included.

        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        836. Bundle.entry:medicationstatement.response.lastModified
        Definition

        The date/time that the resource was modified on the server.

        ShortServer's date time modified
        Comments

        This has to match the same time in the meta header (meta.lastUpdated) if a resource is included.

        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        838. Bundle.entry:medicationstatement.response.outcome
        Definition

        An OperationOutcome containing hints and warnings produced as part of processing this entry in a batch or transaction.

        ShortOperationOutcome with hints and warnings (for batch/transaction)
        Comments

        For a POST/PUT operation, this is the equivalent outcome that would be returned for prefer = operationoutcome - except that the resource is always returned whether or not the outcome is returned.

        This outcome is not used for error responses in batch/transaction, only for hints and warnings. In a batch operation, the error will be in Bundle.entry.response, and for transaction, there will be a single OperationOutcome instead of a bundle in the case of an error.

        Control0..1
        TypeResource
        Is Modifierfalse
        Summarytrue
        840. Bundle.entry:practitioner
        Slice Namepractitioner
        Definition

        An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

        ShortEntry in the bundle - will have a resource or information
        Control0..*
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
        bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
        ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        842. Bundle.entry:practitioner.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        844. Bundle.entry:practitioner.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        846. Bundle.entry:practitioner.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        848. Bundle.entry:practitioner.link
        Definition

        A series of links that provide context to this entry.

        ShortLinks related to this entry
        Control0..*
        TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        850. Bundle.entry:practitioner.fullUrl
        Definition

        The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

        • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
        • Results from operations might involve resources that are not identified.
        ShortURI for resource (Absolute URL server address or URI for UUID/OID)
        Comments

        fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

        Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        852. Bundle.entry:practitioner.resource
        Definition

        A person who is directly or indirectly involved in the provisioning of healthcare.

        ShortA person with a formal responsibility in the provisioning of healthcare or related services
        Control1..1
        TypePractitioner(Practitioner (IPS))
        Is Modifierfalse
        Summaryfalse
        854. Bundle.entry:practitioner.search
        Definition

        Information about the search process that lead to the creation of this entry.

        ShortSearch related information
        Control0..1
        This element is affected by the following invariants: bdl-2
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        856. Bundle.entry:practitioner.search.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        858. Bundle.entry:practitioner.search.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        860. Bundle.entry:practitioner.search.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        862. Bundle.entry:practitioner.search.mode
        Definition

        Why this entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

        Shortmatch | include | outcome - why this is in the result set
        Comments

        There is only one mode. In some corner cases, a resource may be included because it is both a match and an include. In these circumstances, 'match' takes precedence.

        Control0..1
        BindingThe codes SHALL be taken from SearchEntryMode
        (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

        Why an entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        864. Bundle.entry:practitioner.search.score
        Definition

        When searching, the server's search ranking score for the entry.

        ShortSearch ranking (between 0 and 1)
        Comments

        Servers are not required to return a ranking score. 1 is most relevant, and 0 is least relevant. Often, search results are sorted by score, but the client may specify a different sort order.

        See Patient Match for the EMPI search which relates to this element.

        Control0..1
        Typedecimal
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        866. Bundle.entry:practitioner.request
        Definition

        Additional information about how this entry should be processed as part of a transaction or batch. For history, it shows how the entry was processed to create the version contained in the entry.

        ShortAdditional execution information (transaction/batch/history)
        Control0..1
        This element is affected by the following invariants: bdl-3
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        868. Bundle.entry:practitioner.request.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        870. Bundle.entry:practitioner.request.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        872. Bundle.entry:practitioner.request.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        874. Bundle.entry:practitioner.request.method
        Definition

        In a transaction or batch, this is the HTTP action to be executed for this entry. In a history bundle, this indicates the HTTP action that occurred.

        ShortGET | HEAD | POST | PUT | DELETE | PATCH
        Control1..1
        BindingThe codes SHALL be taken from HTTPVerb
        (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

        HTTP verbs (in the HTTP command line). See HTTP rfc for details.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        876. Bundle.entry:practitioner.request.url
        Definition

        The URL for this entry, relative to the root (the address to which the request is posted).

        ShortURL for HTTP equivalent of this entry
        Comments

        E.g. for a Patient Create, the method would be "POST" and the URL would be "Patient". For a Patient Update, the method would be PUT and the URL would be "Patient/[id]".

        Control1..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        878. Bundle.entry:practitioner.request.ifNoneMatch
        Definition

        If the ETag values match, return a 304 Not Modified status. See the API documentation for "Conditional Read".

        ShortFor managing cache currency
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        880. Bundle.entry:practitioner.request.ifModifiedSince
        Definition

        Only perform the operation if the last updated date matches. See the API documentation for "Conditional Read".

        ShortFor managing cache currency
        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        882. Bundle.entry:practitioner.request.ifMatch
        Definition

        Only perform the operation if the Etag value matches. For more information, see the API section "Managing Resource Contention".

        ShortFor managing update contention
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        884. Bundle.entry:practitioner.request.ifNoneExist
        Definition

        Instruct the server not to perform the create if a specified resource already exists. For further information, see the API documentation for "Conditional Create". This is just the query portion of the URL - what follows the "?" (not including the "?").

        ShortFor conditional creates
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        886. Bundle.entry:practitioner.response
        Definition

        Indicates the results of processing the corresponding 'request' entry in the batch or transaction being responded to or what the results of an operation where when returning history.

        ShortResults of execution (transaction/batch/history)
        Control0..1
        This element is affected by the following invariants: bdl-4
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        888. Bundle.entry:practitioner.response.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        890. Bundle.entry:practitioner.response.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        892. Bundle.entry:practitioner.response.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        894. Bundle.entry:practitioner.response.status
        Definition

        The status code returned by processing this entry. The status SHALL start with a 3 digit HTTP code (e.g. 404) and may contain the standard HTTP description associated with the status code.

        ShortStatus response code (text optional)
        Control1..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        896. Bundle.entry:practitioner.response.location
        Definition

        The location header created by processing this operation, populated if the operation returns a location.

        ShortThe location (if the operation returns a location)
        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        898. Bundle.entry:practitioner.response.etag
        Definition

        The Etag for the resource, if the operation for the entry produced a versioned resource (see Resource Metadata and Versioning and Managing Resource Contention).

        ShortThe Etag for the resource (if relevant)
        Comments

        Etags match the Resource.meta.versionId. The ETag has to match the version id in the header if a resource is included.

        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        900. Bundle.entry:practitioner.response.lastModified
        Definition

        The date/time that the resource was modified on the server.

        ShortServer's date time modified
        Comments

        This has to match the same time in the meta header (meta.lastUpdated) if a resource is included.

        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        902. Bundle.entry:practitioner.response.outcome
        Definition

        An OperationOutcome containing hints and warnings produced as part of processing this entry in a batch or transaction.

        ShortOperationOutcome with hints and warnings (for batch/transaction)
        Comments

        For a POST/PUT operation, this is the equivalent outcome that would be returned for prefer = operationoutcome - except that the resource is always returned whether or not the outcome is returned.

        This outcome is not used for error responses in batch/transaction, only for hints and warnings. In a batch operation, the error will be in Bundle.entry.response, and for transaction, there will be a single OperationOutcome instead of a bundle in the case of an error.

        Control0..1
        TypeResource
        Is Modifierfalse
        Summarytrue
        904. Bundle.entry:practitionerrole
        Slice Namepractitionerrole
        Definition

        An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

        ShortEntry in the bundle - will have a resource or information
        Control0..*
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
        bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
        ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        906. Bundle.entry:practitionerrole.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        908. Bundle.entry:practitionerrole.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        910. Bundle.entry:practitionerrole.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        912. Bundle.entry:practitionerrole.link
        Definition

        A series of links that provide context to this entry.

        ShortLinks related to this entry
        Control0..*
        TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        914. Bundle.entry:practitionerrole.fullUrl
        Definition

        The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

        • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
        • Results from operations might involve resources that are not identified.
        ShortURI for resource (Absolute URL server address or URI for UUID/OID)
        Comments

        fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

        Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        916. Bundle.entry:practitionerrole.resource
        Definition

        A specific set of Roles/Locations/specialties/services that a practitioner may perform at an organization for a period of time.

        ShortRoles/organizations the practitioner is associated with
        Control1..1
        TypePractitionerRole(PractitionerRole (IPS))
        Is Modifierfalse
        Summaryfalse
        918. Bundle.entry:practitionerrole.search
        Definition

        Information about the search process that lead to the creation of this entry.

        ShortSearch related information
        Control0..1
        This element is affected by the following invariants: bdl-2
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        920. Bundle.entry:practitionerrole.search.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        922. Bundle.entry:practitionerrole.search.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        924. Bundle.entry:practitionerrole.search.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        926. Bundle.entry:practitionerrole.search.mode
        Definition

        Why this entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

        Shortmatch | include | outcome - why this is in the result set
        Comments

        There is only one mode. In some corner cases, a resource may be included because it is both a match and an include. In these circumstances, 'match' takes precedence.

        Control0..1
        BindingThe codes SHALL be taken from SearchEntryMode
        (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

        Why an entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        928. Bundle.entry:practitionerrole.search.score
        Definition

        When searching, the server's search ranking score for the entry.

        ShortSearch ranking (between 0 and 1)
        Comments

        Servers are not required to return a ranking score. 1 is most relevant, and 0 is least relevant. Often, search results are sorted by score, but the client may specify a different sort order.

        See Patient Match for the EMPI search which relates to this element.

        Control0..1
        Typedecimal
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        930. Bundle.entry:practitionerrole.request
        Definition

        Additional information about how this entry should be processed as part of a transaction or batch. For history, it shows how the entry was processed to create the version contained in the entry.

        ShortAdditional execution information (transaction/batch/history)
        Control0..1
        This element is affected by the following invariants: bdl-3
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        932. Bundle.entry:practitionerrole.request.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        934. Bundle.entry:practitionerrole.request.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        936. Bundle.entry:practitionerrole.request.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        938. Bundle.entry:practitionerrole.request.method
        Definition

        In a transaction or batch, this is the HTTP action to be executed for this entry. In a history bundle, this indicates the HTTP action that occurred.

        ShortGET | HEAD | POST | PUT | DELETE | PATCH
        Control1..1
        BindingThe codes SHALL be taken from HTTPVerb
        (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

        HTTP verbs (in the HTTP command line). See HTTP rfc for details.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        940. Bundle.entry:practitionerrole.request.url
        Definition

        The URL for this entry, relative to the root (the address to which the request is posted).

        ShortURL for HTTP equivalent of this entry
        Comments

        E.g. for a Patient Create, the method would be "POST" and the URL would be "Patient". For a Patient Update, the method would be PUT and the URL would be "Patient/[id]".

        Control1..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        942. Bundle.entry:practitionerrole.request.ifNoneMatch
        Definition

        If the ETag values match, return a 304 Not Modified status. See the API documentation for "Conditional Read".

        ShortFor managing cache currency
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        944. Bundle.entry:practitionerrole.request.ifModifiedSince
        Definition

        Only perform the operation if the last updated date matches. See the API documentation for "Conditional Read".

        ShortFor managing cache currency
        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        946. Bundle.entry:practitionerrole.request.ifMatch
        Definition

        Only perform the operation if the Etag value matches. For more information, see the API section "Managing Resource Contention".

        ShortFor managing update contention
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        948. Bundle.entry:practitionerrole.request.ifNoneExist
        Definition

        Instruct the server not to perform the create if a specified resource already exists. For further information, see the API documentation for "Conditional Create". This is just the query portion of the URL - what follows the "?" (not including the "?").

        ShortFor conditional creates
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        950. Bundle.entry:practitionerrole.response
        Definition

        Indicates the results of processing the corresponding 'request' entry in the batch or transaction being responded to or what the results of an operation where when returning history.

        ShortResults of execution (transaction/batch/history)
        Control0..1
        This element is affected by the following invariants: bdl-4
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        952. Bundle.entry:practitionerrole.response.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        954. Bundle.entry:practitionerrole.response.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        956. Bundle.entry:practitionerrole.response.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        958. Bundle.entry:practitionerrole.response.status
        Definition

        The status code returned by processing this entry. The status SHALL start with a 3 digit HTTP code (e.g. 404) and may contain the standard HTTP description associated with the status code.

        ShortStatus response code (text optional)
        Control1..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        960. Bundle.entry:practitionerrole.response.location
        Definition

        The location header created by processing this operation, populated if the operation returns a location.

        ShortThe location (if the operation returns a location)
        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        962. Bundle.entry:practitionerrole.response.etag
        Definition

        The Etag for the resource, if the operation for the entry produced a versioned resource (see Resource Metadata and Versioning and Managing Resource Contention).

        ShortThe Etag for the resource (if relevant)
        Comments

        Etags match the Resource.meta.versionId. The ETag has to match the version id in the header if a resource is included.

        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        964. Bundle.entry:practitionerrole.response.lastModified
        Definition

        The date/time that the resource was modified on the server.

        ShortServer's date time modified
        Comments

        This has to match the same time in the meta header (meta.lastUpdated) if a resource is included.

        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        966. Bundle.entry:practitionerrole.response.outcome
        Definition

        An OperationOutcome containing hints and warnings produced as part of processing this entry in a batch or transaction.

        ShortOperationOutcome with hints and warnings (for batch/transaction)
        Comments

        For a POST/PUT operation, this is the equivalent outcome that would be returned for prefer = operationoutcome - except that the resource is always returned whether or not the outcome is returned.

        This outcome is not used for error responses in batch/transaction, only for hints and warnings. In a batch operation, the error will be in Bundle.entry.response, and for transaction, there will be a single OperationOutcome instead of a bundle in the case of an error.

        Control0..1
        TypeResource
        Is Modifierfalse
        Summarytrue
        968. Bundle.entry:procedure
        Slice Nameprocedure
        Definition

        An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

        ShortEntry in the bundle - will have a resource or information
        Control0..*
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
        bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
        ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        970. Bundle.entry:procedure.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        972. Bundle.entry:procedure.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        974. Bundle.entry:procedure.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        976. Bundle.entry:procedure.link
        Definition

        A series of links that provide context to this entry.

        ShortLinks related to this entry
        Control0..*
        TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        978. Bundle.entry:procedure.fullUrl
        Definition

        The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

        • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
        • Results from operations might involve resources that are not identified.
        ShortURI for resource (Absolute URL server address or URI for UUID/OID)
        Comments

        fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

        Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        980. Bundle.entry:procedure.resource
        Definition

        An action that is or was performed on or for a patient. This can be a physical intervention like an operation, or less invasive like long term services, counseling, or hypnotherapy.

        ShortAn action that is being or was performed on a patient
        Control1..1
        TypeProcedure(Procedure (IPS))
        Is Modifierfalse
        Summaryfalse
        982. Bundle.entry:procedure.search
        Definition

        Information about the search process that lead to the creation of this entry.

        ShortSearch related information
        Control0..1
        This element is affected by the following invariants: bdl-2
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        984. Bundle.entry:procedure.search.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        986. Bundle.entry:procedure.search.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        988. Bundle.entry:procedure.search.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        990. Bundle.entry:procedure.search.mode
        Definition

        Why this entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

        Shortmatch | include | outcome - why this is in the result set
        Comments

        There is only one mode. In some corner cases, a resource may be included because it is both a match and an include. In these circumstances, 'match' takes precedence.

        Control0..1
        BindingThe codes SHALL be taken from SearchEntryMode
        (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

        Why an entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        992. Bundle.entry:procedure.search.score
        Definition

        When searching, the server's search ranking score for the entry.

        ShortSearch ranking (between 0 and 1)
        Comments

        Servers are not required to return a ranking score. 1 is most relevant, and 0 is least relevant. Often, search results are sorted by score, but the client may specify a different sort order.

        See Patient Match for the EMPI search which relates to this element.

        Control0..1
        Typedecimal
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        994. Bundle.entry:procedure.request
        Definition

        Additional information about how this entry should be processed as part of a transaction or batch. For history, it shows how the entry was processed to create the version contained in the entry.

        ShortAdditional execution information (transaction/batch/history)
        Control0..1
        This element is affected by the following invariants: bdl-3
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        996. Bundle.entry:procedure.request.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        998. Bundle.entry:procedure.request.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1000. Bundle.entry:procedure.request.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1002. Bundle.entry:procedure.request.method
        Definition

        In a transaction or batch, this is the HTTP action to be executed for this entry. In a history bundle, this indicates the HTTP action that occurred.

        ShortGET | HEAD | POST | PUT | DELETE | PATCH
        Control1..1
        BindingThe codes SHALL be taken from HTTPVerb
        (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

        HTTP verbs (in the HTTP command line). See HTTP rfc for details.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1004. Bundle.entry:procedure.request.url
        Definition

        The URL for this entry, relative to the root (the address to which the request is posted).

        ShortURL for HTTP equivalent of this entry
        Comments

        E.g. for a Patient Create, the method would be "POST" and the URL would be "Patient". For a Patient Update, the method would be PUT and the URL would be "Patient/[id]".

        Control1..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1006. Bundle.entry:procedure.request.ifNoneMatch
        Definition

        If the ETag values match, return a 304 Not Modified status. See the API documentation for "Conditional Read".

        ShortFor managing cache currency
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1008. Bundle.entry:procedure.request.ifModifiedSince
        Definition

        Only perform the operation if the last updated date matches. See the API documentation for "Conditional Read".

        ShortFor managing cache currency
        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1010. Bundle.entry:procedure.request.ifMatch
        Definition

        Only perform the operation if the Etag value matches. For more information, see the API section "Managing Resource Contention".

        ShortFor managing update contention
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1012. Bundle.entry:procedure.request.ifNoneExist
        Definition

        Instruct the server not to perform the create if a specified resource already exists. For further information, see the API documentation for "Conditional Create". This is just the query portion of the URL - what follows the "?" (not including the "?").

        ShortFor conditional creates
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1014. Bundle.entry:procedure.response
        Definition

        Indicates the results of processing the corresponding 'request' entry in the batch or transaction being responded to or what the results of an operation where when returning history.

        ShortResults of execution (transaction/batch/history)
        Control0..1
        This element is affected by the following invariants: bdl-4
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1016. Bundle.entry:procedure.response.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1018. Bundle.entry:procedure.response.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1020. Bundle.entry:procedure.response.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1022. Bundle.entry:procedure.response.status
        Definition

        The status code returned by processing this entry. The status SHALL start with a 3 digit HTTP code (e.g. 404) and may contain the standard HTTP description associated with the status code.

        ShortStatus response code (text optional)
        Control1..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1024. Bundle.entry:procedure.response.location
        Definition

        The location header created by processing this operation, populated if the operation returns a location.

        ShortThe location (if the operation returns a location)
        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1026. Bundle.entry:procedure.response.etag
        Definition

        The Etag for the resource, if the operation for the entry produced a versioned resource (see Resource Metadata and Versioning and Managing Resource Contention).

        ShortThe Etag for the resource (if relevant)
        Comments

        Etags match the Resource.meta.versionId. The ETag has to match the version id in the header if a resource is included.

        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1028. Bundle.entry:procedure.response.lastModified
        Definition

        The date/time that the resource was modified on the server.

        ShortServer's date time modified
        Comments

        This has to match the same time in the meta header (meta.lastUpdated) if a resource is included.

        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1030. Bundle.entry:procedure.response.outcome
        Definition

        An OperationOutcome containing hints and warnings produced as part of processing this entry in a batch or transaction.

        ShortOperationOutcome with hints and warnings (for batch/transaction)
        Comments

        For a POST/PUT operation, this is the equivalent outcome that would be returned for prefer = operationoutcome - except that the resource is always returned whether or not the outcome is returned.

        This outcome is not used for error responses in batch/transaction, only for hints and warnings. In a batch operation, the error will be in Bundle.entry.response, and for transaction, there will be a single OperationOutcome instead of a bundle in the case of an error.

        Control0..1
        TypeResource
        Is Modifierfalse
        Summarytrue
        1032. Bundle.entry:organization
        Slice Nameorganization
        Definition

        An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

        ShortEntry in the bundle - will have a resource or information
        Control0..*
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
        bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
        ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1034. Bundle.entry:organization.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1036. Bundle.entry:organization.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1038. Bundle.entry:organization.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1040. Bundle.entry:organization.link
        Definition

        A series of links that provide context to this entry.

        ShortLinks related to this entry
        Control0..*
        TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1042. Bundle.entry:organization.fullUrl
        Definition

        The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

        • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
        • Results from operations might involve resources that are not identified.
        ShortURI for resource (Absolute URL server address or URI for UUID/OID)
        Comments

        fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

        Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1044. Bundle.entry:organization.resource
        Definition

        A formally or informally recognized grouping of people or organizations formed for the purpose of achieving some form of collective action. Includes companies, institutions, corporations, departments, community groups, healthcare practice groups, payer/insurer, etc.

        ShortA grouping of people or organizations with a common purpose
        Control1..1
        TypeOrganization(Organization (IPS))
        Is Modifierfalse
        Summaryfalse
        1046. Bundle.entry:organization.search
        Definition

        Information about the search process that lead to the creation of this entry.

        ShortSearch related information
        Control0..1
        This element is affected by the following invariants: bdl-2
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1048. Bundle.entry:organization.search.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1050. Bundle.entry:organization.search.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1052. Bundle.entry:organization.search.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1054. Bundle.entry:organization.search.mode
        Definition

        Why this entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

        Shortmatch | include | outcome - why this is in the result set
        Comments

        There is only one mode. In some corner cases, a resource may be included because it is both a match and an include. In these circumstances, 'match' takes precedence.

        Control0..1
        BindingThe codes SHALL be taken from SearchEntryMode
        (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

        Why an entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1056. Bundle.entry:organization.search.score
        Definition

        When searching, the server's search ranking score for the entry.

        ShortSearch ranking (between 0 and 1)
        Comments

        Servers are not required to return a ranking score. 1 is most relevant, and 0 is least relevant. Often, search results are sorted by score, but the client may specify a different sort order.

        See Patient Match for the EMPI search which relates to this element.

        Control0..1
        Typedecimal
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1058. Bundle.entry:organization.request
        Definition

        Additional information about how this entry should be processed as part of a transaction or batch. For history, it shows how the entry was processed to create the version contained in the entry.

        ShortAdditional execution information (transaction/batch/history)
        Control0..1
        This element is affected by the following invariants: bdl-3
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1060. Bundle.entry:organization.request.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1062. Bundle.entry:organization.request.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1064. Bundle.entry:organization.request.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1066. Bundle.entry:organization.request.method
        Definition

        In a transaction or batch, this is the HTTP action to be executed for this entry. In a history bundle, this indicates the HTTP action that occurred.

        ShortGET | HEAD | POST | PUT | DELETE | PATCH
        Control1..1
        BindingThe codes SHALL be taken from HTTPVerb
        (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

        HTTP verbs (in the HTTP command line). See HTTP rfc for details.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1068. Bundle.entry:organization.request.url
        Definition

        The URL for this entry, relative to the root (the address to which the request is posted).

        ShortURL for HTTP equivalent of this entry
        Comments

        E.g. for a Patient Create, the method would be "POST" and the URL would be "Patient". For a Patient Update, the method would be PUT and the URL would be "Patient/[id]".

        Control1..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1070. Bundle.entry:organization.request.ifNoneMatch
        Definition

        If the ETag values match, return a 304 Not Modified status. See the API documentation for "Conditional Read".

        ShortFor managing cache currency
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1072. Bundle.entry:organization.request.ifModifiedSince
        Definition

        Only perform the operation if the last updated date matches. See the API documentation for "Conditional Read".

        ShortFor managing cache currency
        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1074. Bundle.entry:organization.request.ifMatch
        Definition

        Only perform the operation if the Etag value matches. For more information, see the API section "Managing Resource Contention".

        ShortFor managing update contention
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1076. Bundle.entry:organization.request.ifNoneExist
        Definition

        Instruct the server not to perform the create if a specified resource already exists. For further information, see the API documentation for "Conditional Create". This is just the query portion of the URL - what follows the "?" (not including the "?").

        ShortFor conditional creates
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1078. Bundle.entry:organization.response
        Definition

        Indicates the results of processing the corresponding 'request' entry in the batch or transaction being responded to or what the results of an operation where when returning history.

        ShortResults of execution (transaction/batch/history)
        Control0..1
        This element is affected by the following invariants: bdl-4
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1080. Bundle.entry:organization.response.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1082. Bundle.entry:organization.response.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1084. Bundle.entry:organization.response.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1086. Bundle.entry:organization.response.status
        Definition

        The status code returned by processing this entry. The status SHALL start with a 3 digit HTTP code (e.g. 404) and may contain the standard HTTP description associated with the status code.

        ShortStatus response code (text optional)
        Control1..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1088. Bundle.entry:organization.response.location
        Definition

        The location header created by processing this operation, populated if the operation returns a location.

        ShortThe location (if the operation returns a location)
        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1090. Bundle.entry:organization.response.etag
        Definition

        The Etag for the resource, if the operation for the entry produced a versioned resource (see Resource Metadata and Versioning and Managing Resource Contention).

        ShortThe Etag for the resource (if relevant)
        Comments

        Etags match the Resource.meta.versionId. The ETag has to match the version id in the header if a resource is included.

        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1092. Bundle.entry:organization.response.lastModified
        Definition

        The date/time that the resource was modified on the server.

        ShortServer's date time modified
        Comments

        This has to match the same time in the meta header (meta.lastUpdated) if a resource is included.

        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1094. Bundle.entry:organization.response.outcome
        Definition

        An OperationOutcome containing hints and warnings produced as part of processing this entry in a batch or transaction.

        ShortOperationOutcome with hints and warnings (for batch/transaction)
        Comments

        For a POST/PUT operation, this is the equivalent outcome that would be returned for prefer = operationoutcome - except that the resource is always returned whether or not the outcome is returned.

        This outcome is not used for error responses in batch/transaction, only for hints and warnings. In a batch operation, the error will be in Bundle.entry.response, and for transaction, there will be a single OperationOutcome instead of a bundle in the case of an error.

        Control0..1
        TypeResource
        Is Modifierfalse
        Summarytrue
        1096. Bundle.entry:observation-pregnancy-edd
        Slice Nameobservation-pregnancy-edd
        Definition

        An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

        ShortEntry in the bundle - will have a resource or information
        Control0..*
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
        bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
        ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1098. Bundle.entry:observation-pregnancy-edd.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1100. Bundle.entry:observation-pregnancy-edd.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1102. Bundle.entry:observation-pregnancy-edd.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1104. Bundle.entry:observation-pregnancy-edd.link
        Definition

        A series of links that provide context to this entry.

        ShortLinks related to this entry
        Control0..*
        TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1106. Bundle.entry:observation-pregnancy-edd.fullUrl
        Definition

        The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

        • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
        • Results from operations might involve resources that are not identified.
        ShortURI for resource (Absolute URL server address or URI for UUID/OID)
        Comments

        fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

        Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1108. Bundle.entry:observation-pregnancy-edd.resource
        Definition

        Measurements and simple assertions made about a patient, device or other subject.

        ShortMeasurements and simple assertions
        Comments

        Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.

        Control1..1
        TypeObservation(Observation - Pregnancy: EDD)
        Is Modifierfalse
        Summaryfalse
        Alternate NamesVital Signs, Measurement, Results, Tests
        1110. Bundle.entry:observation-pregnancy-edd.search
        Definition

        Information about the search process that lead to the creation of this entry.

        ShortSearch related information
        Control0..1
        This element is affected by the following invariants: bdl-2
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1112. Bundle.entry:observation-pregnancy-edd.search.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1114. Bundle.entry:observation-pregnancy-edd.search.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1116. Bundle.entry:observation-pregnancy-edd.search.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1118. Bundle.entry:observation-pregnancy-edd.search.mode
        Definition

        Why this entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

        Shortmatch | include | outcome - why this is in the result set
        Comments

        There is only one mode. In some corner cases, a resource may be included because it is both a match and an include. In these circumstances, 'match' takes precedence.

        Control0..1
        BindingThe codes SHALL be taken from SearchEntryMode
        (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

        Why an entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1120. Bundle.entry:observation-pregnancy-edd.search.score
        Definition

        When searching, the server's search ranking score for the entry.

        ShortSearch ranking (between 0 and 1)
        Comments

        Servers are not required to return a ranking score. 1 is most relevant, and 0 is least relevant. Often, search results are sorted by score, but the client may specify a different sort order.

        See Patient Match for the EMPI search which relates to this element.

        Control0..1
        Typedecimal
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1122. Bundle.entry:observation-pregnancy-edd.request
        Definition

        Additional information about how this entry should be processed as part of a transaction or batch. For history, it shows how the entry was processed to create the version contained in the entry.

        ShortAdditional execution information (transaction/batch/history)
        Control0..1
        This element is affected by the following invariants: bdl-3
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1124. Bundle.entry:observation-pregnancy-edd.request.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1126. Bundle.entry:observation-pregnancy-edd.request.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1128. Bundle.entry:observation-pregnancy-edd.request.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1130. Bundle.entry:observation-pregnancy-edd.request.method
        Definition

        In a transaction or batch, this is the HTTP action to be executed for this entry. In a history bundle, this indicates the HTTP action that occurred.

        ShortGET | HEAD | POST | PUT | DELETE | PATCH
        Control1..1
        BindingThe codes SHALL be taken from HTTPVerb
        (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

        HTTP verbs (in the HTTP command line). See HTTP rfc for details.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1132. Bundle.entry:observation-pregnancy-edd.request.url
        Definition

        The URL for this entry, relative to the root (the address to which the request is posted).

        ShortURL for HTTP equivalent of this entry
        Comments

        E.g. for a Patient Create, the method would be "POST" and the URL would be "Patient". For a Patient Update, the method would be PUT and the URL would be "Patient/[id]".

        Control1..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1134. Bundle.entry:observation-pregnancy-edd.request.ifNoneMatch
        Definition

        If the ETag values match, return a 304 Not Modified status. See the API documentation for "Conditional Read".

        ShortFor managing cache currency
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1136. Bundle.entry:observation-pregnancy-edd.request.ifModifiedSince
        Definition

        Only perform the operation if the last updated date matches. See the API documentation for "Conditional Read".

        ShortFor managing cache currency
        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1138. Bundle.entry:observation-pregnancy-edd.request.ifMatch
        Definition

        Only perform the operation if the Etag value matches. For more information, see the API section "Managing Resource Contention".

        ShortFor managing update contention
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1140. Bundle.entry:observation-pregnancy-edd.request.ifNoneExist
        Definition

        Instruct the server not to perform the create if a specified resource already exists. For further information, see the API documentation for "Conditional Create". This is just the query portion of the URL - what follows the "?" (not including the "?").

        ShortFor conditional creates
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1142. Bundle.entry:observation-pregnancy-edd.response
        Definition

        Indicates the results of processing the corresponding 'request' entry in the batch or transaction being responded to or what the results of an operation where when returning history.

        ShortResults of execution (transaction/batch/history)
        Control0..1
        This element is affected by the following invariants: bdl-4
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1144. Bundle.entry:observation-pregnancy-edd.response.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1146. Bundle.entry:observation-pregnancy-edd.response.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1148. Bundle.entry:observation-pregnancy-edd.response.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1150. Bundle.entry:observation-pregnancy-edd.response.status
        Definition

        The status code returned by processing this entry. The status SHALL start with a 3 digit HTTP code (e.g. 404) and may contain the standard HTTP description associated with the status code.

        ShortStatus response code (text optional)
        Control1..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1152. Bundle.entry:observation-pregnancy-edd.response.location
        Definition

        The location header created by processing this operation, populated if the operation returns a location.

        ShortThe location (if the operation returns a location)
        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1154. Bundle.entry:observation-pregnancy-edd.response.etag
        Definition

        The Etag for the resource, if the operation for the entry produced a versioned resource (see Resource Metadata and Versioning and Managing Resource Contention).

        ShortThe Etag for the resource (if relevant)
        Comments

        Etags match the Resource.meta.versionId. The ETag has to match the version id in the header if a resource is included.

        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1156. Bundle.entry:observation-pregnancy-edd.response.lastModified
        Definition

        The date/time that the resource was modified on the server.

        ShortServer's date time modified
        Comments

        This has to match the same time in the meta header (meta.lastUpdated) if a resource is included.

        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1158. Bundle.entry:observation-pregnancy-edd.response.outcome
        Definition

        An OperationOutcome containing hints and warnings produced as part of processing this entry in a batch or transaction.

        ShortOperationOutcome with hints and warnings (for batch/transaction)
        Comments

        For a POST/PUT operation, this is the equivalent outcome that would be returned for prefer = operationoutcome - except that the resource is always returned whether or not the outcome is returned.

        This outcome is not used for error responses in batch/transaction, only for hints and warnings. In a batch operation, the error will be in Bundle.entry.response, and for transaction, there will be a single OperationOutcome instead of a bundle in the case of an error.

        Control0..1
        TypeResource
        Is Modifierfalse
        Summarytrue
        1160. Bundle.entry:observation-pregnancy-outcome
        Slice Nameobservation-pregnancy-outcome
        Definition

        An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

        ShortEntry in the bundle - will have a resource or information
        Control0..*
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
        bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
        ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1162. Bundle.entry:observation-pregnancy-outcome.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1164. Bundle.entry:observation-pregnancy-outcome.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1166. Bundle.entry:observation-pregnancy-outcome.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1168. Bundle.entry:observation-pregnancy-outcome.link
        Definition

        A series of links that provide context to this entry.

        ShortLinks related to this entry
        Control0..*
        TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1170. Bundle.entry:observation-pregnancy-outcome.fullUrl
        Definition

        The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

        • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
        • Results from operations might involve resources that are not identified.
        ShortURI for resource (Absolute URL server address or URI for UUID/OID)
        Comments

        fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

        Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1172. Bundle.entry:observation-pregnancy-outcome.resource
        Definition

        Measurements and simple assertions made about a patient, device or other subject.

        ShortMeasurements and simple assertions
        Comments

        Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.

        Control1..1
        TypeObservation(Observation - Pregnancy: outcome)
        Is Modifierfalse
        Summaryfalse
        Alternate NamesVital Signs, Measurement, Results, Tests
        1174. Bundle.entry:observation-pregnancy-outcome.search
        Definition

        Information about the search process that lead to the creation of this entry.

        ShortSearch related information
        Control0..1
        This element is affected by the following invariants: bdl-2
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1176. Bundle.entry:observation-pregnancy-outcome.search.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1178. Bundle.entry:observation-pregnancy-outcome.search.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1180. Bundle.entry:observation-pregnancy-outcome.search.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1182. Bundle.entry:observation-pregnancy-outcome.search.mode
        Definition

        Why this entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

        Shortmatch | include | outcome - why this is in the result set
        Comments

        There is only one mode. In some corner cases, a resource may be included because it is both a match and an include. In these circumstances, 'match' takes precedence.

        Control0..1
        BindingThe codes SHALL be taken from SearchEntryMode
        (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

        Why an entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1184. Bundle.entry:observation-pregnancy-outcome.search.score
        Definition

        When searching, the server's search ranking score for the entry.

        ShortSearch ranking (between 0 and 1)
        Comments

        Servers are not required to return a ranking score. 1 is most relevant, and 0 is least relevant. Often, search results are sorted by score, but the client may specify a different sort order.

        See Patient Match for the EMPI search which relates to this element.

        Control0..1
        Typedecimal
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1186. Bundle.entry:observation-pregnancy-outcome.request
        Definition

        Additional information about how this entry should be processed as part of a transaction or batch. For history, it shows how the entry was processed to create the version contained in the entry.

        ShortAdditional execution information (transaction/batch/history)
        Control0..1
        This element is affected by the following invariants: bdl-3
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1188. Bundle.entry:observation-pregnancy-outcome.request.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1190. Bundle.entry:observation-pregnancy-outcome.request.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1192. Bundle.entry:observation-pregnancy-outcome.request.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1194. Bundle.entry:observation-pregnancy-outcome.request.method
        Definition

        In a transaction or batch, this is the HTTP action to be executed for this entry. In a history bundle, this indicates the HTTP action that occurred.

        ShortGET | HEAD | POST | PUT | DELETE | PATCH
        Control1..1
        BindingThe codes SHALL be taken from HTTPVerb
        (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

        HTTP verbs (in the HTTP command line). See HTTP rfc for details.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1196. Bundle.entry:observation-pregnancy-outcome.request.url
        Definition

        The URL for this entry, relative to the root (the address to which the request is posted).

        ShortURL for HTTP equivalent of this entry
        Comments

        E.g. for a Patient Create, the method would be "POST" and the URL would be "Patient". For a Patient Update, the method would be PUT and the URL would be "Patient/[id]".

        Control1..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1198. Bundle.entry:observation-pregnancy-outcome.request.ifNoneMatch
        Definition

        If the ETag values match, return a 304 Not Modified status. See the API documentation for "Conditional Read".

        ShortFor managing cache currency
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1200. Bundle.entry:observation-pregnancy-outcome.request.ifModifiedSince
        Definition

        Only perform the operation if the last updated date matches. See the API documentation for "Conditional Read".

        ShortFor managing cache currency
        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1202. Bundle.entry:observation-pregnancy-outcome.request.ifMatch
        Definition

        Only perform the operation if the Etag value matches. For more information, see the API section "Managing Resource Contention".

        ShortFor managing update contention
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1204. Bundle.entry:observation-pregnancy-outcome.request.ifNoneExist
        Definition

        Instruct the server not to perform the create if a specified resource already exists. For further information, see the API documentation for "Conditional Create". This is just the query portion of the URL - what follows the "?" (not including the "?").

        ShortFor conditional creates
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1206. Bundle.entry:observation-pregnancy-outcome.response
        Definition

        Indicates the results of processing the corresponding 'request' entry in the batch or transaction being responded to or what the results of an operation where when returning history.

        ShortResults of execution (transaction/batch/history)
        Control0..1
        This element is affected by the following invariants: bdl-4
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1208. Bundle.entry:observation-pregnancy-outcome.response.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1210. Bundle.entry:observation-pregnancy-outcome.response.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1212. Bundle.entry:observation-pregnancy-outcome.response.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1214. Bundle.entry:observation-pregnancy-outcome.response.status
        Definition

        The status code returned by processing this entry. The status SHALL start with a 3 digit HTTP code (e.g. 404) and may contain the standard HTTP description associated with the status code.

        ShortStatus response code (text optional)
        Control1..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1216. Bundle.entry:observation-pregnancy-outcome.response.location
        Definition

        The location header created by processing this operation, populated if the operation returns a location.

        ShortThe location (if the operation returns a location)
        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1218. Bundle.entry:observation-pregnancy-outcome.response.etag
        Definition

        The Etag for the resource, if the operation for the entry produced a versioned resource (see Resource Metadata and Versioning and Managing Resource Contention).

        ShortThe Etag for the resource (if relevant)
        Comments

        Etags match the Resource.meta.versionId. The ETag has to match the version id in the header if a resource is included.

        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1220. Bundle.entry:observation-pregnancy-outcome.response.lastModified
        Definition

        The date/time that the resource was modified on the server.

        ShortServer's date time modified
        Comments

        This has to match the same time in the meta header (meta.lastUpdated) if a resource is included.

        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1222. Bundle.entry:observation-pregnancy-outcome.response.outcome
        Definition

        An OperationOutcome containing hints and warnings produced as part of processing this entry in a batch or transaction.

        ShortOperationOutcome with hints and warnings (for batch/transaction)
        Comments

        For a POST/PUT operation, this is the equivalent outcome that would be returned for prefer = operationoutcome - except that the resource is always returned whether or not the outcome is returned.

        This outcome is not used for error responses in batch/transaction, only for hints and warnings. In a batch operation, the error will be in Bundle.entry.response, and for transaction, there will be a single OperationOutcome instead of a bundle in the case of an error.

        Control0..1
        TypeResource
        Is Modifierfalse
        Summarytrue
        1224. Bundle.entry:observation-pregnancy-status
        Slice Nameobservation-pregnancy-status
        Definition

        An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

        ShortEntry in the bundle - will have a resource or information
        Control0..*
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
        bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
        ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1226. Bundle.entry:observation-pregnancy-status.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1228. Bundle.entry:observation-pregnancy-status.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1230. Bundle.entry:observation-pregnancy-status.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1232. Bundle.entry:observation-pregnancy-status.link
        Definition

        A series of links that provide context to this entry.

        ShortLinks related to this entry
        Control0..*
        TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1234. Bundle.entry:observation-pregnancy-status.fullUrl
        Definition

        The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

        • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
        • Results from operations might involve resources that are not identified.
        ShortURI for resource (Absolute URL server address or URI for UUID/OID)
        Comments

        fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

        Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1236. Bundle.entry:observation-pregnancy-status.resource
        Definition

        Measurements and simple assertions made about a patient, device or other subject.

        ShortMeasurements and simple assertions
        Comments

        Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.

        Control1..1
        TypeObservation(Observation - Pregnancy: status)
        Is Modifierfalse
        Summaryfalse
        Alternate NamesVital Signs, Measurement, Results, Tests
        1238. Bundle.entry:observation-pregnancy-status.search
        Definition

        Information about the search process that lead to the creation of this entry.

        ShortSearch related information
        Control0..1
        This element is affected by the following invariants: bdl-2
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1240. Bundle.entry:observation-pregnancy-status.search.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1242. Bundle.entry:observation-pregnancy-status.search.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1244. Bundle.entry:observation-pregnancy-status.search.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1246. Bundle.entry:observation-pregnancy-status.search.mode
        Definition

        Why this entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

        Shortmatch | include | outcome - why this is in the result set
        Comments

        There is only one mode. In some corner cases, a resource may be included because it is both a match and an include. In these circumstances, 'match' takes precedence.

        Control0..1
        BindingThe codes SHALL be taken from SearchEntryMode
        (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

        Why an entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1248. Bundle.entry:observation-pregnancy-status.search.score
        Definition

        When searching, the server's search ranking score for the entry.

        ShortSearch ranking (between 0 and 1)
        Comments

        Servers are not required to return a ranking score. 1 is most relevant, and 0 is least relevant. Often, search results are sorted by score, but the client may specify a different sort order.

        See Patient Match for the EMPI search which relates to this element.

        Control0..1
        Typedecimal
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1250. Bundle.entry:observation-pregnancy-status.request
        Definition

        Additional information about how this entry should be processed as part of a transaction or batch. For history, it shows how the entry was processed to create the version contained in the entry.

        ShortAdditional execution information (transaction/batch/history)
        Control0..1
        This element is affected by the following invariants: bdl-3
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1252. Bundle.entry:observation-pregnancy-status.request.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1254. Bundle.entry:observation-pregnancy-status.request.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1256. Bundle.entry:observation-pregnancy-status.request.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1258. Bundle.entry:observation-pregnancy-status.request.method
        Definition

        In a transaction or batch, this is the HTTP action to be executed for this entry. In a history bundle, this indicates the HTTP action that occurred.

        ShortGET | HEAD | POST | PUT | DELETE | PATCH
        Control1..1
        BindingThe codes SHALL be taken from HTTPVerb
        (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

        HTTP verbs (in the HTTP command line). See HTTP rfc for details.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1260. Bundle.entry:observation-pregnancy-status.request.url
        Definition

        The URL for this entry, relative to the root (the address to which the request is posted).

        ShortURL for HTTP equivalent of this entry
        Comments

        E.g. for a Patient Create, the method would be "POST" and the URL would be "Patient". For a Patient Update, the method would be PUT and the URL would be "Patient/[id]".

        Control1..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1262. Bundle.entry:observation-pregnancy-status.request.ifNoneMatch
        Definition

        If the ETag values match, return a 304 Not Modified status. See the API documentation for "Conditional Read".

        ShortFor managing cache currency
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1264. Bundle.entry:observation-pregnancy-status.request.ifModifiedSince
        Definition

        Only perform the operation if the last updated date matches. See the API documentation for "Conditional Read".

        ShortFor managing cache currency
        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1266. Bundle.entry:observation-pregnancy-status.request.ifMatch
        Definition

        Only perform the operation if the Etag value matches. For more information, see the API section "Managing Resource Contention".

        ShortFor managing update contention
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1268. Bundle.entry:observation-pregnancy-status.request.ifNoneExist
        Definition

        Instruct the server not to perform the create if a specified resource already exists. For further information, see the API documentation for "Conditional Create". This is just the query portion of the URL - what follows the "?" (not including the "?").

        ShortFor conditional creates
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1270. Bundle.entry:observation-pregnancy-status.response
        Definition

        Indicates the results of processing the corresponding 'request' entry in the batch or transaction being responded to or what the results of an operation where when returning history.

        ShortResults of execution (transaction/batch/history)
        Control0..1
        This element is affected by the following invariants: bdl-4
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1272. Bundle.entry:observation-pregnancy-status.response.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1274. Bundle.entry:observation-pregnancy-status.response.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1276. Bundle.entry:observation-pregnancy-status.response.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1278. Bundle.entry:observation-pregnancy-status.response.status
        Definition

        The status code returned by processing this entry. The status SHALL start with a 3 digit HTTP code (e.g. 404) and may contain the standard HTTP description associated with the status code.

        ShortStatus response code (text optional)
        Control1..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1280. Bundle.entry:observation-pregnancy-status.response.location
        Definition

        The location header created by processing this operation, populated if the operation returns a location.

        ShortThe location (if the operation returns a location)
        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1282. Bundle.entry:observation-pregnancy-status.response.etag
        Definition

        The Etag for the resource, if the operation for the entry produced a versioned resource (see Resource Metadata and Versioning and Managing Resource Contention).

        ShortThe Etag for the resource (if relevant)
        Comments

        Etags match the Resource.meta.versionId. The ETag has to match the version id in the header if a resource is included.

        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1284. Bundle.entry:observation-pregnancy-status.response.lastModified
        Definition

        The date/time that the resource was modified on the server.

        ShortServer's date time modified
        Comments

        This has to match the same time in the meta header (meta.lastUpdated) if a resource is included.

        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1286. Bundle.entry:observation-pregnancy-status.response.outcome
        Definition

        An OperationOutcome containing hints and warnings produced as part of processing this entry in a batch or transaction.

        ShortOperationOutcome with hints and warnings (for batch/transaction)
        Comments

        For a POST/PUT operation, this is the equivalent outcome that would be returned for prefer = operationoutcome - except that the resource is always returned whether or not the outcome is returned.

        This outcome is not used for error responses in batch/transaction, only for hints and warnings. In a batch operation, the error will be in Bundle.entry.response, and for transaction, there will be a single OperationOutcome instead of a bundle in the case of an error.

        Control0..1
        TypeResource
        Is Modifierfalse
        Summarytrue
        1288. Bundle.entry:observation-alcohol-use
        Slice Nameobservation-alcohol-use
        Definition

        An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

        ShortEntry in the bundle - will have a resource or information
        Control0..*
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
        bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
        ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1290. Bundle.entry:observation-alcohol-use.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1292. Bundle.entry:observation-alcohol-use.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1294. Bundle.entry:observation-alcohol-use.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1296. Bundle.entry:observation-alcohol-use.link
        Definition

        A series of links that provide context to this entry.

        ShortLinks related to this entry
        Control0..*
        TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1298. Bundle.entry:observation-alcohol-use.fullUrl
        Definition

        The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

        • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
        • Results from operations might involve resources that are not identified.
        ShortURI for resource (Absolute URL server address or URI for UUID/OID)
        Comments

        fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

        Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1300. Bundle.entry:observation-alcohol-use.resource
        Definition

        Measurements and simple assertions made about a patient, device or other subject.

        ShortMeasurements and simple assertions
        Comments

        Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.

        Control1..1
        TypeObservation(Observation - SH: alcohol use)
        Is Modifierfalse
        Summaryfalse
        Alternate NamesVital Signs, Measurement, Results, Tests
        1302. Bundle.entry:observation-alcohol-use.search
        Definition

        Information about the search process that lead to the creation of this entry.

        ShortSearch related information
        Control0..1
        This element is affected by the following invariants: bdl-2
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1304. Bundle.entry:observation-alcohol-use.search.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1306. Bundle.entry:observation-alcohol-use.search.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1308. Bundle.entry:observation-alcohol-use.search.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1310. Bundle.entry:observation-alcohol-use.search.mode
        Definition

        Why this entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

        Shortmatch | include | outcome - why this is in the result set
        Comments

        There is only one mode. In some corner cases, a resource may be included because it is both a match and an include. In these circumstances, 'match' takes precedence.

        Control0..1
        BindingThe codes SHALL be taken from SearchEntryMode
        (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

        Why an entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1312. Bundle.entry:observation-alcohol-use.search.score
        Definition

        When searching, the server's search ranking score for the entry.

        ShortSearch ranking (between 0 and 1)
        Comments

        Servers are not required to return a ranking score. 1 is most relevant, and 0 is least relevant. Often, search results are sorted by score, but the client may specify a different sort order.

        See Patient Match for the EMPI search which relates to this element.

        Control0..1
        Typedecimal
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1314. Bundle.entry:observation-alcohol-use.request
        Definition

        Additional information about how this entry should be processed as part of a transaction or batch. For history, it shows how the entry was processed to create the version contained in the entry.

        ShortAdditional execution information (transaction/batch/history)
        Control0..1
        This element is affected by the following invariants: bdl-3
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1316. Bundle.entry:observation-alcohol-use.request.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1318. Bundle.entry:observation-alcohol-use.request.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1320. Bundle.entry:observation-alcohol-use.request.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1322. Bundle.entry:observation-alcohol-use.request.method
        Definition

        In a transaction or batch, this is the HTTP action to be executed for this entry. In a history bundle, this indicates the HTTP action that occurred.

        ShortGET | HEAD | POST | PUT | DELETE | PATCH
        Control1..1
        BindingThe codes SHALL be taken from HTTPVerb
        (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

        HTTP verbs (in the HTTP command line). See HTTP rfc for details.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1324. Bundle.entry:observation-alcohol-use.request.url
        Definition

        The URL for this entry, relative to the root (the address to which the request is posted).

        ShortURL for HTTP equivalent of this entry
        Comments

        E.g. for a Patient Create, the method would be "POST" and the URL would be "Patient". For a Patient Update, the method would be PUT and the URL would be "Patient/[id]".

        Control1..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1326. Bundle.entry:observation-alcohol-use.request.ifNoneMatch
        Definition

        If the ETag values match, return a 304 Not Modified status. See the API documentation for "Conditional Read".

        ShortFor managing cache currency
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1328. Bundle.entry:observation-alcohol-use.request.ifModifiedSince
        Definition

        Only perform the operation if the last updated date matches. See the API documentation for "Conditional Read".

        ShortFor managing cache currency
        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1330. Bundle.entry:observation-alcohol-use.request.ifMatch
        Definition

        Only perform the operation if the Etag value matches. For more information, see the API section "Managing Resource Contention".

        ShortFor managing update contention
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1332. Bundle.entry:observation-alcohol-use.request.ifNoneExist
        Definition

        Instruct the server not to perform the create if a specified resource already exists. For further information, see the API documentation for "Conditional Create". This is just the query portion of the URL - what follows the "?" (not including the "?").

        ShortFor conditional creates
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1334. Bundle.entry:observation-alcohol-use.response
        Definition

        Indicates the results of processing the corresponding 'request' entry in the batch or transaction being responded to or what the results of an operation where when returning history.

        ShortResults of execution (transaction/batch/history)
        Control0..1
        This element is affected by the following invariants: bdl-4
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1336. Bundle.entry:observation-alcohol-use.response.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1338. Bundle.entry:observation-alcohol-use.response.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1340. Bundle.entry:observation-alcohol-use.response.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1342. Bundle.entry:observation-alcohol-use.response.status
        Definition

        The status code returned by processing this entry. The status SHALL start with a 3 digit HTTP code (e.g. 404) and may contain the standard HTTP description associated with the status code.

        ShortStatus response code (text optional)
        Control1..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1344. Bundle.entry:observation-alcohol-use.response.location
        Definition

        The location header created by processing this operation, populated if the operation returns a location.

        ShortThe location (if the operation returns a location)
        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1346. Bundle.entry:observation-alcohol-use.response.etag
        Definition

        The Etag for the resource, if the operation for the entry produced a versioned resource (see Resource Metadata and Versioning and Managing Resource Contention).

        ShortThe Etag for the resource (if relevant)
        Comments

        Etags match the Resource.meta.versionId. The ETag has to match the version id in the header if a resource is included.

        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1348. Bundle.entry:observation-alcohol-use.response.lastModified
        Definition

        The date/time that the resource was modified on the server.

        ShortServer's date time modified
        Comments

        This has to match the same time in the meta header (meta.lastUpdated) if a resource is included.

        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1350. Bundle.entry:observation-alcohol-use.response.outcome
        Definition

        An OperationOutcome containing hints and warnings produced as part of processing this entry in a batch or transaction.

        ShortOperationOutcome with hints and warnings (for batch/transaction)
        Comments

        For a POST/PUT operation, this is the equivalent outcome that would be returned for prefer = operationoutcome - except that the resource is always returned whether or not the outcome is returned.

        This outcome is not used for error responses in batch/transaction, only for hints and warnings. In a batch operation, the error will be in Bundle.entry.response, and for transaction, there will be a single OperationOutcome instead of a bundle in the case of an error.

        Control0..1
        TypeResource
        Is Modifierfalse
        Summarytrue
        1352. Bundle.entry:observation-tobacco-use
        Slice Nameobservation-tobacco-use
        Definition

        An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

        ShortEntry in the bundle - will have a resource or information
        Control0..*
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
        bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
        ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1354. Bundle.entry:observation-tobacco-use.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1356. Bundle.entry:observation-tobacco-use.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1358. Bundle.entry:observation-tobacco-use.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1360. Bundle.entry:observation-tobacco-use.link
        Definition

        A series of links that provide context to this entry.

        ShortLinks related to this entry
        Control0..*
        TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1362. Bundle.entry:observation-tobacco-use.fullUrl
        Definition

        The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

        • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
        • Results from operations might involve resources that are not identified.
        ShortURI for resource (Absolute URL server address or URI for UUID/OID)
        Comments

        fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

        Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1364. Bundle.entry:observation-tobacco-use.resource
        Definition

        Measurements and simple assertions made about a patient, device or other subject.

        ShortMeasurements and simple assertions
        Comments

        Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.

        Control1..1
        TypeObservation(Observation - SH: tobacco use)
        Is Modifierfalse
        Summaryfalse
        Alternate NamesVital Signs, Measurement, Results, Tests
        1366. Bundle.entry:observation-tobacco-use.search
        Definition

        Information about the search process that lead to the creation of this entry.

        ShortSearch related information
        Control0..1
        This element is affected by the following invariants: bdl-2
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1368. Bundle.entry:observation-tobacco-use.search.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1370. Bundle.entry:observation-tobacco-use.search.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1372. Bundle.entry:observation-tobacco-use.search.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1374. Bundle.entry:observation-tobacco-use.search.mode
        Definition

        Why this entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

        Shortmatch | include | outcome - why this is in the result set
        Comments

        There is only one mode. In some corner cases, a resource may be included because it is both a match and an include. In these circumstances, 'match' takes precedence.

        Control0..1
        BindingThe codes SHALL be taken from SearchEntryMode
        (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

        Why an entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1376. Bundle.entry:observation-tobacco-use.search.score
        Definition

        When searching, the server's search ranking score for the entry.

        ShortSearch ranking (between 0 and 1)
        Comments

        Servers are not required to return a ranking score. 1 is most relevant, and 0 is least relevant. Often, search results are sorted by score, but the client may specify a different sort order.

        See Patient Match for the EMPI search which relates to this element.

        Control0..1
        Typedecimal
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1378. Bundle.entry:observation-tobacco-use.request
        Definition

        Additional information about how this entry should be processed as part of a transaction or batch. For history, it shows how the entry was processed to create the version contained in the entry.

        ShortAdditional execution information (transaction/batch/history)
        Control0..1
        This element is affected by the following invariants: bdl-3
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1380. Bundle.entry:observation-tobacco-use.request.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1382. Bundle.entry:observation-tobacco-use.request.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1384. Bundle.entry:observation-tobacco-use.request.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1386. Bundle.entry:observation-tobacco-use.request.method
        Definition

        In a transaction or batch, this is the HTTP action to be executed for this entry. In a history bundle, this indicates the HTTP action that occurred.

        ShortGET | HEAD | POST | PUT | DELETE | PATCH
        Control1..1
        BindingThe codes SHALL be taken from HTTPVerb
        (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

        HTTP verbs (in the HTTP command line). See HTTP rfc for details.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1388. Bundle.entry:observation-tobacco-use.request.url
        Definition

        The URL for this entry, relative to the root (the address to which the request is posted).

        ShortURL for HTTP equivalent of this entry
        Comments

        E.g. for a Patient Create, the method would be "POST" and the URL would be "Patient". For a Patient Update, the method would be PUT and the URL would be "Patient/[id]".

        Control1..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1390. Bundle.entry:observation-tobacco-use.request.ifNoneMatch
        Definition

        If the ETag values match, return a 304 Not Modified status. See the API documentation for "Conditional Read".

        ShortFor managing cache currency
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1392. Bundle.entry:observation-tobacco-use.request.ifModifiedSince
        Definition

        Only perform the operation if the last updated date matches. See the API documentation for "Conditional Read".

        ShortFor managing cache currency
        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1394. Bundle.entry:observation-tobacco-use.request.ifMatch
        Definition

        Only perform the operation if the Etag value matches. For more information, see the API section "Managing Resource Contention".

        ShortFor managing update contention
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1396. Bundle.entry:observation-tobacco-use.request.ifNoneExist
        Definition

        Instruct the server not to perform the create if a specified resource already exists. For further information, see the API documentation for "Conditional Create". This is just the query portion of the URL - what follows the "?" (not including the "?").

        ShortFor conditional creates
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1398. Bundle.entry:observation-tobacco-use.response
        Definition

        Indicates the results of processing the corresponding 'request' entry in the batch or transaction being responded to or what the results of an operation where when returning history.

        ShortResults of execution (transaction/batch/history)
        Control0..1
        This element is affected by the following invariants: bdl-4
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1400. Bundle.entry:observation-tobacco-use.response.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1402. Bundle.entry:observation-tobacco-use.response.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1404. Bundle.entry:observation-tobacco-use.response.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1406. Bundle.entry:observation-tobacco-use.response.status
        Definition

        The status code returned by processing this entry. The status SHALL start with a 3 digit HTTP code (e.g. 404) and may contain the standard HTTP description associated with the status code.

        ShortStatus response code (text optional)
        Control1..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1408. Bundle.entry:observation-tobacco-use.response.location
        Definition

        The location header created by processing this operation, populated if the operation returns a location.

        ShortThe location (if the operation returns a location)
        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1410. Bundle.entry:observation-tobacco-use.response.etag
        Definition

        The Etag for the resource, if the operation for the entry produced a versioned resource (see Resource Metadata and Versioning and Managing Resource Contention).

        ShortThe Etag for the resource (if relevant)
        Comments

        Etags match the Resource.meta.versionId. The ETag has to match the version id in the header if a resource is included.

        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1412. Bundle.entry:observation-tobacco-use.response.lastModified
        Definition

        The date/time that the resource was modified on the server.

        ShortServer's date time modified
        Comments

        This has to match the same time in the meta header (meta.lastUpdated) if a resource is included.

        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1414. Bundle.entry:observation-tobacco-use.response.outcome
        Definition

        An OperationOutcome containing hints and warnings produced as part of processing this entry in a batch or transaction.

        ShortOperationOutcome with hints and warnings (for batch/transaction)
        Comments

        For a POST/PUT operation, this is the equivalent outcome that would be returned for prefer = operationoutcome - except that the resource is always returned whether or not the outcome is returned.

        This outcome is not used for error responses in batch/transaction, only for hints and warnings. In a batch operation, the error will be in Bundle.entry.response, and for transaction, there will be a single OperationOutcome instead of a bundle in the case of an error.

        Control0..1
        TypeResource
        Is Modifierfalse
        Summarytrue
        1416. Bundle.entry:observation-results-laboratory-pathology
        Slice Nameobservation-results-laboratory-pathology
        Definition

        An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

        ShortEntry in the bundle - will have a resource or information
        Control0..*
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
        bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
        ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1418. Bundle.entry:observation-results-laboratory-pathology.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1420. Bundle.entry:observation-results-laboratory-pathology.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1422. Bundle.entry:observation-results-laboratory-pathology.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1424. Bundle.entry:observation-results-laboratory-pathology.link
        Definition

        A series of links that provide context to this entry.

        ShortLinks related to this entry
        Control0..*
        TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1426. Bundle.entry:observation-results-laboratory-pathology.fullUrl
        Definition

        The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

        • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
        • Results from operations might involve resources that are not identified.
        ShortURI for resource (Absolute URL server address or URI for UUID/OID)
        Comments

        fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

        Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1428. Bundle.entry:observation-results-laboratory-pathology.resource
        Definition

        This observation may represent the result of a simple laboratory or pathology test such as hematocrit, or it may group the set of results produced by a multi-test study or panel such as a complete blood count, a dynamic function test, or a urine specimen study. In the latter case, the observation carries the overall conclusion of the study and references the atomic results of the study as "has-member" child observations

        ShortLaboratory (including Pathology) result for a simple test or for a panel/study
        Comments

        Represents either a lab simple observation or the group of observations produced by a laboratory study.

        Control1..1
        TypeObservation(Observation Results: laboratory/pathology (IPS))
        Is Modifierfalse
        Summaryfalse
        Alternate NamesVital Signs, Measurement, Results, Tests
        1430. Bundle.entry:observation-results-laboratory-pathology.search
        Definition

        Information about the search process that lead to the creation of this entry.

        ShortSearch related information
        Control0..1
        This element is affected by the following invariants: bdl-2
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1432. Bundle.entry:observation-results-laboratory-pathology.search.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1434. Bundle.entry:observation-results-laboratory-pathology.search.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1436. Bundle.entry:observation-results-laboratory-pathology.search.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1438. Bundle.entry:observation-results-laboratory-pathology.search.mode
        Definition

        Why this entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

        Shortmatch | include | outcome - why this is in the result set
        Comments

        There is only one mode. In some corner cases, a resource may be included because it is both a match and an include. In these circumstances, 'match' takes precedence.

        Control0..1
        BindingThe codes SHALL be taken from SearchEntryMode
        (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

        Why an entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1440. Bundle.entry:observation-results-laboratory-pathology.search.score
        Definition

        When searching, the server's search ranking score for the entry.

        ShortSearch ranking (between 0 and 1)
        Comments

        Servers are not required to return a ranking score. 1 is most relevant, and 0 is least relevant. Often, search results are sorted by score, but the client may specify a different sort order.

        See Patient Match for the EMPI search which relates to this element.

        Control0..1
        Typedecimal
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1442. Bundle.entry:observation-results-laboratory-pathology.request
        Definition

        Additional information about how this entry should be processed as part of a transaction or batch. For history, it shows how the entry was processed to create the version contained in the entry.

        ShortAdditional execution information (transaction/batch/history)
        Control0..1
        This element is affected by the following invariants: bdl-3
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1444. Bundle.entry:observation-results-laboratory-pathology.request.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1446. Bundle.entry:observation-results-laboratory-pathology.request.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1448. Bundle.entry:observation-results-laboratory-pathology.request.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1450. Bundle.entry:observation-results-laboratory-pathology.request.method
        Definition

        In a transaction or batch, this is the HTTP action to be executed for this entry. In a history bundle, this indicates the HTTP action that occurred.

        ShortGET | HEAD | POST | PUT | DELETE | PATCH
        Control1..1
        BindingThe codes SHALL be taken from HTTPVerb
        (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

        HTTP verbs (in the HTTP command line). See HTTP rfc for details.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1452. Bundle.entry:observation-results-laboratory-pathology.request.url
        Definition

        The URL for this entry, relative to the root (the address to which the request is posted).

        ShortURL for HTTP equivalent of this entry
        Comments

        E.g. for a Patient Create, the method would be "POST" and the URL would be "Patient". For a Patient Update, the method would be PUT and the URL would be "Patient/[id]".

        Control1..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1454. Bundle.entry:observation-results-laboratory-pathology.request.ifNoneMatch
        Definition

        If the ETag values match, return a 304 Not Modified status. See the API documentation for "Conditional Read".

        ShortFor managing cache currency
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1456. Bundle.entry:observation-results-laboratory-pathology.request.ifModifiedSince
        Definition

        Only perform the operation if the last updated date matches. See the API documentation for "Conditional Read".

        ShortFor managing cache currency
        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1458. Bundle.entry:observation-results-laboratory-pathology.request.ifMatch
        Definition

        Only perform the operation if the Etag value matches. For more information, see the API section "Managing Resource Contention".

        ShortFor managing update contention
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1460. Bundle.entry:observation-results-laboratory-pathology.request.ifNoneExist
        Definition

        Instruct the server not to perform the create if a specified resource already exists. For further information, see the API documentation for "Conditional Create". This is just the query portion of the URL - what follows the "?" (not including the "?").

        ShortFor conditional creates
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1462. Bundle.entry:observation-results-laboratory-pathology.response
        Definition

        Indicates the results of processing the corresponding 'request' entry in the batch or transaction being responded to or what the results of an operation where when returning history.

        ShortResults of execution (transaction/batch/history)
        Control0..1
        This element is affected by the following invariants: bdl-4
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1464. Bundle.entry:observation-results-laboratory-pathology.response.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1466. Bundle.entry:observation-results-laboratory-pathology.response.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1468. Bundle.entry:observation-results-laboratory-pathology.response.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1470. Bundle.entry:observation-results-laboratory-pathology.response.status
        Definition

        The status code returned by processing this entry. The status SHALL start with a 3 digit HTTP code (e.g. 404) and may contain the standard HTTP description associated with the status code.

        ShortStatus response code (text optional)
        Control1..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1472. Bundle.entry:observation-results-laboratory-pathology.response.location
        Definition

        The location header created by processing this operation, populated if the operation returns a location.

        ShortThe location (if the operation returns a location)
        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1474. Bundle.entry:observation-results-laboratory-pathology.response.etag
        Definition

        The Etag for the resource, if the operation for the entry produced a versioned resource (see Resource Metadata and Versioning and Managing Resource Contention).

        ShortThe Etag for the resource (if relevant)
        Comments

        Etags match the Resource.meta.versionId. The ETag has to match the version id in the header if a resource is included.

        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1476. Bundle.entry:observation-results-laboratory-pathology.response.lastModified
        Definition

        The date/time that the resource was modified on the server.

        ShortServer's date time modified
        Comments

        This has to match the same time in the meta header (meta.lastUpdated) if a resource is included.

        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1478. Bundle.entry:observation-results-laboratory-pathology.response.outcome
        Definition

        An OperationOutcome containing hints and warnings produced as part of processing this entry in a batch or transaction.

        ShortOperationOutcome with hints and warnings (for batch/transaction)
        Comments

        For a POST/PUT operation, this is the equivalent outcome that would be returned for prefer = operationoutcome - except that the resource is always returned whether or not the outcome is returned.

        This outcome is not used for error responses in batch/transaction, only for hints and warnings. In a batch operation, the error will be in Bundle.entry.response, and for transaction, there will be a single OperationOutcome instead of a bundle in the case of an error.

        Control0..1
        TypeResource
        Is Modifierfalse
        Summarytrue
        1480. Bundle.entry:observation-results-radiology
        Slice Nameobservation-results-radiology
        Definition

        An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

        ShortEntry in the bundle - will have a resource or information
        Control0..*
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
        bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
        ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1482. Bundle.entry:observation-results-radiology.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1484. Bundle.entry:observation-results-radiology.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1486. Bundle.entry:observation-results-radiology.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1488. Bundle.entry:observation-results-radiology.link
        Definition

        A series of links that provide context to this entry.

        ShortLinks related to this entry
        Control0..*
        TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1490. Bundle.entry:observation-results-radiology.fullUrl
        Definition

        The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

        • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
        • Results from operations might involve resources that are not identified.
        ShortURI for resource (Absolute URL server address or URI for UUID/OID)
        Comments

        fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

        Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1492. Bundle.entry:observation-results-radiology.resource
        Definition

        Measurements and simple assertions made about a patient, device or other subject.

        ShortMeasurements and simple assertions
        Comments

        Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.

        Control1..1
        TypeObservation(Observation Results: radiology (IPS))
        Is Modifierfalse
        Summaryfalse
        Alternate NamesVital Signs, Measurement, Results, Tests
        1494. Bundle.entry:observation-results-radiology.search
        Definition

        Information about the search process that lead to the creation of this entry.

        ShortSearch related information
        Control0..1
        This element is affected by the following invariants: bdl-2
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1496. Bundle.entry:observation-results-radiology.search.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1498. Bundle.entry:observation-results-radiology.search.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1500. Bundle.entry:observation-results-radiology.search.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1502. Bundle.entry:observation-results-radiology.search.mode
        Definition

        Why this entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

        Shortmatch | include | outcome - why this is in the result set
        Comments

        There is only one mode. In some corner cases, a resource may be included because it is both a match and an include. In these circumstances, 'match' takes precedence.

        Control0..1
        BindingThe codes SHALL be taken from SearchEntryMode
        (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

        Why an entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1504. Bundle.entry:observation-results-radiology.search.score
        Definition

        When searching, the server's search ranking score for the entry.

        ShortSearch ranking (between 0 and 1)
        Comments

        Servers are not required to return a ranking score. 1 is most relevant, and 0 is least relevant. Often, search results are sorted by score, but the client may specify a different sort order.

        See Patient Match for the EMPI search which relates to this element.

        Control0..1
        Typedecimal
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1506. Bundle.entry:observation-results-radiology.request
        Definition

        Additional information about how this entry should be processed as part of a transaction or batch. For history, it shows how the entry was processed to create the version contained in the entry.

        ShortAdditional execution information (transaction/batch/history)
        Control0..1
        This element is affected by the following invariants: bdl-3
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1508. Bundle.entry:observation-results-radiology.request.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1510. Bundle.entry:observation-results-radiology.request.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1512. Bundle.entry:observation-results-radiology.request.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1514. Bundle.entry:observation-results-radiology.request.method
        Definition

        In a transaction or batch, this is the HTTP action to be executed for this entry. In a history bundle, this indicates the HTTP action that occurred.

        ShortGET | HEAD | POST | PUT | DELETE | PATCH
        Control1..1
        BindingThe codes SHALL be taken from HTTPVerb
        (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

        HTTP verbs (in the HTTP command line). See HTTP rfc for details.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1516. Bundle.entry:observation-results-radiology.request.url
        Definition

        The URL for this entry, relative to the root (the address to which the request is posted).

        ShortURL for HTTP equivalent of this entry
        Comments

        E.g. for a Patient Create, the method would be "POST" and the URL would be "Patient". For a Patient Update, the method would be PUT and the URL would be "Patient/[id]".

        Control1..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1518. Bundle.entry:observation-results-radiology.request.ifNoneMatch
        Definition

        If the ETag values match, return a 304 Not Modified status. See the API documentation for "Conditional Read".

        ShortFor managing cache currency
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1520. Bundle.entry:observation-results-radiology.request.ifModifiedSince
        Definition

        Only perform the operation if the last updated date matches. See the API documentation for "Conditional Read".

        ShortFor managing cache currency
        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1522. Bundle.entry:observation-results-radiology.request.ifMatch
        Definition

        Only perform the operation if the Etag value matches. For more information, see the API section "Managing Resource Contention".

        ShortFor managing update contention
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1524. Bundle.entry:observation-results-radiology.request.ifNoneExist
        Definition

        Instruct the server not to perform the create if a specified resource already exists. For further information, see the API documentation for "Conditional Create". This is just the query portion of the URL - what follows the "?" (not including the "?").

        ShortFor conditional creates
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1526. Bundle.entry:observation-results-radiology.response
        Definition

        Indicates the results of processing the corresponding 'request' entry in the batch or transaction being responded to or what the results of an operation where when returning history.

        ShortResults of execution (transaction/batch/history)
        Control0..1
        This element is affected by the following invariants: bdl-4
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1528. Bundle.entry:observation-results-radiology.response.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1530. Bundle.entry:observation-results-radiology.response.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1532. Bundle.entry:observation-results-radiology.response.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1534. Bundle.entry:observation-results-radiology.response.status
        Definition

        The status code returned by processing this entry. The status SHALL start with a 3 digit HTTP code (e.g. 404) and may contain the standard HTTP description associated with the status code.

        ShortStatus response code (text optional)
        Control1..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1536. Bundle.entry:observation-results-radiology.response.location
        Definition

        The location header created by processing this operation, populated if the operation returns a location.

        ShortThe location (if the operation returns a location)
        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1538. Bundle.entry:observation-results-radiology.response.etag
        Definition

        The Etag for the resource, if the operation for the entry produced a versioned resource (see Resource Metadata and Versioning and Managing Resource Contention).

        ShortThe Etag for the resource (if relevant)
        Comments

        Etags match the Resource.meta.versionId. The ETag has to match the version id in the header if a resource is included.

        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1540. Bundle.entry:observation-results-radiology.response.lastModified
        Definition

        The date/time that the resource was modified on the server.

        ShortServer's date time modified
        Comments

        This has to match the same time in the meta header (meta.lastUpdated) if a resource is included.

        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1542. Bundle.entry:observation-results-radiology.response.outcome
        Definition

        An OperationOutcome containing hints and warnings produced as part of processing this entry in a batch or transaction.

        ShortOperationOutcome with hints and warnings (for batch/transaction)
        Comments

        For a POST/PUT operation, this is the equivalent outcome that would be returned for prefer = operationoutcome - except that the resource is always returned whether or not the outcome is returned.

        This outcome is not used for error responses in batch/transaction, only for hints and warnings. In a batch operation, the error will be in Bundle.entry.response, and for transaction, there will be a single OperationOutcome instead of a bundle in the case of an error.

        Control0..1
        TypeResource
        Is Modifierfalse
        Summarytrue
        1544. Bundle.entry:observation-vital-signs
        Slice Nameobservation-vital-signs
        Definition

        An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

        ShortEntry in the bundle - will have a resource or information
        Control0..*
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
        bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
        ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1546. Bundle.entry:observation-vital-signs.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1548. Bundle.entry:observation-vital-signs.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1550. Bundle.entry:observation-vital-signs.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1552. Bundle.entry:observation-vital-signs.link
        Definition

        A series of links that provide context to this entry.

        ShortLinks related to this entry
        Control0..*
        TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1554. Bundle.entry:observation-vital-signs.fullUrl
        Definition

        The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

        • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
        • Results from operations might involve resources that are not identified.
        ShortURI for resource (Absolute URL server address or URI for UUID/OID)
        Comments

        fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

        Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1556. Bundle.entry:observation-vital-signs.resource
        Definition

        The FHIR Vitals Signs profile sets minimum expectations for the Observation Resource to record, search and fetch the vital signs associated with a patient.

        ShortFHIR Vital Signs Profile
        Comments

        Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.

        Control1..1
        TypeObservation(Vital Signs Profile)
        Is Modifierfalse
        Summaryfalse
        Alternate NamesVital Signs, Measurement, Results, Tests
        1558. Bundle.entry:observation-vital-signs.search
        Definition

        Information about the search process that lead to the creation of this entry.

        ShortSearch related information
        Control0..1
        This element is affected by the following invariants: bdl-2
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1560. Bundle.entry:observation-vital-signs.search.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1562. Bundle.entry:observation-vital-signs.search.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1564. Bundle.entry:observation-vital-signs.search.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1566. Bundle.entry:observation-vital-signs.search.mode
        Definition

        Why this entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

        Shortmatch | include | outcome - why this is in the result set
        Comments

        There is only one mode. In some corner cases, a resource may be included because it is both a match and an include. In these circumstances, 'match' takes precedence.

        Control0..1
        BindingThe codes SHALL be taken from SearchEntryMode
        (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

        Why an entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1568. Bundle.entry:observation-vital-signs.search.score
        Definition

        When searching, the server's search ranking score for the entry.

        ShortSearch ranking (between 0 and 1)
        Comments

        Servers are not required to return a ranking score. 1 is most relevant, and 0 is least relevant. Often, search results are sorted by score, but the client may specify a different sort order.

        See Patient Match for the EMPI search which relates to this element.

        Control0..1
        Typedecimal
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1570. Bundle.entry:observation-vital-signs.request
        Definition

        Additional information about how this entry should be processed as part of a transaction or batch. For history, it shows how the entry was processed to create the version contained in the entry.

        ShortAdditional execution information (transaction/batch/history)
        Control0..1
        This element is affected by the following invariants: bdl-3
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1572. Bundle.entry:observation-vital-signs.request.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1574. Bundle.entry:observation-vital-signs.request.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1576. Bundle.entry:observation-vital-signs.request.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1578. Bundle.entry:observation-vital-signs.request.method
        Definition

        In a transaction or batch, this is the HTTP action to be executed for this entry. In a history bundle, this indicates the HTTP action that occurred.

        ShortGET | HEAD | POST | PUT | DELETE | PATCH
        Control1..1
        BindingThe codes SHALL be taken from HTTPVerb
        (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

        HTTP verbs (in the HTTP command line). See HTTP rfc for details.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1580. Bundle.entry:observation-vital-signs.request.url
        Definition

        The URL for this entry, relative to the root (the address to which the request is posted).

        ShortURL for HTTP equivalent of this entry
        Comments

        E.g. for a Patient Create, the method would be "POST" and the URL would be "Patient". For a Patient Update, the method would be PUT and the URL would be "Patient/[id]".

        Control1..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1582. Bundle.entry:observation-vital-signs.request.ifNoneMatch
        Definition

        If the ETag values match, return a 304 Not Modified status. See the API documentation for "Conditional Read".

        ShortFor managing cache currency
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1584. Bundle.entry:observation-vital-signs.request.ifModifiedSince
        Definition

        Only perform the operation if the last updated date matches. See the API documentation for "Conditional Read".

        ShortFor managing cache currency
        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1586. Bundle.entry:observation-vital-signs.request.ifMatch
        Definition

        Only perform the operation if the Etag value matches. For more information, see the API section "Managing Resource Contention".

        ShortFor managing update contention
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1588. Bundle.entry:observation-vital-signs.request.ifNoneExist
        Definition

        Instruct the server not to perform the create if a specified resource already exists. For further information, see the API documentation for "Conditional Create". This is just the query portion of the URL - what follows the "?" (not including the "?").

        ShortFor conditional creates
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1590. Bundle.entry:observation-vital-signs.response
        Definition

        Indicates the results of processing the corresponding 'request' entry in the batch or transaction being responded to or what the results of an operation where when returning history.

        ShortResults of execution (transaction/batch/history)
        Control0..1
        This element is affected by the following invariants: bdl-4
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1592. Bundle.entry:observation-vital-signs.response.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1594. Bundle.entry:observation-vital-signs.response.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1596. Bundle.entry:observation-vital-signs.response.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1598. Bundle.entry:observation-vital-signs.response.status
        Definition

        The status code returned by processing this entry. The status SHALL start with a 3 digit HTTP code (e.g. 404) and may contain the standard HTTP description associated with the status code.

        ShortStatus response code (text optional)
        Control1..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1600. Bundle.entry:observation-vital-signs.response.location
        Definition

        The location header created by processing this operation, populated if the operation returns a location.

        ShortThe location (if the operation returns a location)
        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1602. Bundle.entry:observation-vital-signs.response.etag
        Definition

        The Etag for the resource, if the operation for the entry produced a versioned resource (see Resource Metadata and Versioning and Managing Resource Contention).

        ShortThe Etag for the resource (if relevant)
        Comments

        Etags match the Resource.meta.versionId. The ETag has to match the version id in the header if a resource is included.

        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1604. Bundle.entry:observation-vital-signs.response.lastModified
        Definition

        The date/time that the resource was modified on the server.

        ShortServer's date time modified
        Comments

        This has to match the same time in the meta header (meta.lastUpdated) if a resource is included.

        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1606. Bundle.entry:observation-vital-signs.response.outcome
        Definition

        An OperationOutcome containing hints and warnings produced as part of processing this entry in a batch or transaction.

        ShortOperationOutcome with hints and warnings (for batch/transaction)
        Comments

        For a POST/PUT operation, this is the equivalent outcome that would be returned for prefer = operationoutcome - except that the resource is always returned whether or not the outcome is returned.

        This outcome is not used for error responses in batch/transaction, only for hints and warnings. In a batch operation, the error will be in Bundle.entry.response, and for transaction, there will be a single OperationOutcome instead of a bundle in the case of an error.

        Control0..1
        TypeResource
        Is Modifierfalse
        Summarytrue
        1608. Bundle.entry:specimen
        Slice Namespecimen
        Definition

        An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

        ShortEntry in the bundle - will have a resource or information
        Control0..*
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
        bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
        ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1610. Bundle.entry:specimen.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1612. Bundle.entry:specimen.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1614. Bundle.entry:specimen.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1616. Bundle.entry:specimen.link
        Definition

        A series of links that provide context to this entry.

        ShortLinks related to this entry
        Control0..*
        TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1618. Bundle.entry:specimen.fullUrl
        Definition

        The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

        • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
        • Results from operations might involve resources that are not identified.
        ShortURI for resource (Absolute URL server address or URI for UUID/OID)
        Comments

        fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

        Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1620. Bundle.entry:specimen.resource
        Definition

        A sample to be used for analysis.

        ShortSample for analysis
        Control1..1
        TypeSpecimen(Specimen (IPS))
        Is Modifierfalse
        Summaryfalse
        1622. Bundle.entry:specimen.search
        Definition

        Information about the search process that lead to the creation of this entry.

        ShortSearch related information
        Control0..1
        This element is affected by the following invariants: bdl-2
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1624. Bundle.entry:specimen.search.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1626. Bundle.entry:specimen.search.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1628. Bundle.entry:specimen.search.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1630. Bundle.entry:specimen.search.mode
        Definition

        Why this entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

        Shortmatch | include | outcome - why this is in the result set
        Comments

        There is only one mode. In some corner cases, a resource may be included because it is both a match and an include. In these circumstances, 'match' takes precedence.

        Control0..1
        BindingThe codes SHALL be taken from SearchEntryMode
        (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

        Why an entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1632. Bundle.entry:specimen.search.score
        Definition

        When searching, the server's search ranking score for the entry.

        ShortSearch ranking (between 0 and 1)
        Comments

        Servers are not required to return a ranking score. 1 is most relevant, and 0 is least relevant. Often, search results are sorted by score, but the client may specify a different sort order.

        See Patient Match for the EMPI search which relates to this element.

        Control0..1
        Typedecimal
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1634. Bundle.entry:specimen.request
        Definition

        Additional information about how this entry should be processed as part of a transaction or batch. For history, it shows how the entry was processed to create the version contained in the entry.

        ShortAdditional execution information (transaction/batch/history)
        Control0..1
        This element is affected by the following invariants: bdl-3
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1636. Bundle.entry:specimen.request.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1638. Bundle.entry:specimen.request.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1640. Bundle.entry:specimen.request.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1642. Bundle.entry:specimen.request.method
        Definition

        In a transaction or batch, this is the HTTP action to be executed for this entry. In a history bundle, this indicates the HTTP action that occurred.

        ShortGET | HEAD | POST | PUT | DELETE | PATCH
        Control1..1
        BindingThe codes SHALL be taken from HTTPVerb
        (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

        HTTP verbs (in the HTTP command line). See HTTP rfc for details.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1644. Bundle.entry:specimen.request.url
        Definition

        The URL for this entry, relative to the root (the address to which the request is posted).

        ShortURL for HTTP equivalent of this entry
        Comments

        E.g. for a Patient Create, the method would be "POST" and the URL would be "Patient". For a Patient Update, the method would be PUT and the URL would be "Patient/[id]".

        Control1..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1646. Bundle.entry:specimen.request.ifNoneMatch
        Definition

        If the ETag values match, return a 304 Not Modified status. See the API documentation for "Conditional Read".

        ShortFor managing cache currency
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1648. Bundle.entry:specimen.request.ifModifiedSince
        Definition

        Only perform the operation if the last updated date matches. See the API documentation for "Conditional Read".

        ShortFor managing cache currency
        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1650. Bundle.entry:specimen.request.ifMatch
        Definition

        Only perform the operation if the Etag value matches. For more information, see the API section "Managing Resource Contention".

        ShortFor managing update contention
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1652. Bundle.entry:specimen.request.ifNoneExist
        Definition

        Instruct the server not to perform the create if a specified resource already exists. For further information, see the API documentation for "Conditional Create". This is just the query portion of the URL - what follows the "?" (not including the "?").

        ShortFor conditional creates
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1654. Bundle.entry:specimen.response
        Definition

        Indicates the results of processing the corresponding 'request' entry in the batch or transaction being responded to or what the results of an operation where when returning history.

        ShortResults of execution (transaction/batch/history)
        Control0..1
        This element is affected by the following invariants: bdl-4
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1656. Bundle.entry:specimen.response.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1658. Bundle.entry:specimen.response.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1660. Bundle.entry:specimen.response.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1662. Bundle.entry:specimen.response.status
        Definition

        The status code returned by processing this entry. The status SHALL start with a 3 digit HTTP code (e.g. 404) and may contain the standard HTTP description associated with the status code.

        ShortStatus response code (text optional)
        Control1..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1664. Bundle.entry:specimen.response.location
        Definition

        The location header created by processing this operation, populated if the operation returns a location.

        ShortThe location (if the operation returns a location)
        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1666. Bundle.entry:specimen.response.etag
        Definition

        The Etag for the resource, if the operation for the entry produced a versioned resource (see Resource Metadata and Versioning and Managing Resource Contention).

        ShortThe Etag for the resource (if relevant)
        Comments

        Etags match the Resource.meta.versionId. The ETag has to match the version id in the header if a resource is included.

        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1668. Bundle.entry:specimen.response.lastModified
        Definition

        The date/time that the resource was modified on the server.

        ShortServer's date time modified
        Comments

        This has to match the same time in the meta header (meta.lastUpdated) if a resource is included.

        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1670. Bundle.entry:specimen.response.outcome
        Definition

        An OperationOutcome containing hints and warnings produced as part of processing this entry in a batch or transaction.

        ShortOperationOutcome with hints and warnings (for batch/transaction)
        Comments

        For a POST/PUT operation, this is the equivalent outcome that would be returned for prefer = operationoutcome - except that the resource is always returned whether or not the outcome is returned.

        This outcome is not used for error responses in batch/transaction, only for hints and warnings. In a batch operation, the error will be in Bundle.entry.response, and for transaction, there will be a single OperationOutcome instead of a bundle in the case of an error.

        Control0..1
        TypeResource
        Is Modifierfalse
        Summarytrue
        1672. Bundle.entry:flag
        Slice Nameflag
        Definition

        An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

        ShortEntry in the bundle - will have a resource or information
        Control0..*
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
        bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
        ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1674. Bundle.entry:flag.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1676. Bundle.entry:flag.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1678. Bundle.entry:flag.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1680. Bundle.entry:flag.link
        Definition

        A series of links that provide context to this entry.

        ShortLinks related to this entry
        Control0..*
        TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1682. Bundle.entry:flag.fullUrl
        Definition

        The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

        • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
        • Results from operations might involve resources that are not identified.
        ShortURI for resource (Absolute URL server address or URI for UUID/OID)
        Comments

        fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

        Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1684. Bundle.entry:flag.resource
        Definition

        Prospective warnings of potential issues when providing care to the patient.

        ShortKey information to flag to healthcare providers
        Control1..1
        TypeFlag(Flag - Alert (IPS))
        Is Modifierfalse
        Summaryfalse
        Alternate NamesBarriers to Care, Alert, Warning
        1686. Bundle.entry:flag.search
        Definition

        Information about the search process that lead to the creation of this entry.

        ShortSearch related information
        Control0..1
        This element is affected by the following invariants: bdl-2
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1688. Bundle.entry:flag.search.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1690. Bundle.entry:flag.search.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1692. Bundle.entry:flag.search.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1694. Bundle.entry:flag.search.mode
        Definition

        Why this entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

        Shortmatch | include | outcome - why this is in the result set
        Comments

        There is only one mode. In some corner cases, a resource may be included because it is both a match and an include. In these circumstances, 'match' takes precedence.

        Control0..1
        BindingThe codes SHALL be taken from SearchEntryMode
        (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

        Why an entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1696. Bundle.entry:flag.search.score
        Definition

        When searching, the server's search ranking score for the entry.

        ShortSearch ranking (between 0 and 1)
        Comments

        Servers are not required to return a ranking score. 1 is most relevant, and 0 is least relevant. Often, search results are sorted by score, but the client may specify a different sort order.

        See Patient Match for the EMPI search which relates to this element.

        Control0..1
        Typedecimal
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1698. Bundle.entry:flag.request
        Definition

        Additional information about how this entry should be processed as part of a transaction or batch. For history, it shows how the entry was processed to create the version contained in the entry.

        ShortAdditional execution information (transaction/batch/history)
        Control0..1
        This element is affected by the following invariants: bdl-3
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1700. Bundle.entry:flag.request.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1702. Bundle.entry:flag.request.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1704. Bundle.entry:flag.request.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1706. Bundle.entry:flag.request.method
        Definition

        In a transaction or batch, this is the HTTP action to be executed for this entry. In a history bundle, this indicates the HTTP action that occurred.

        ShortGET | HEAD | POST | PUT | DELETE | PATCH
        Control1..1
        BindingThe codes SHALL be taken from HTTPVerb
        (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

        HTTP verbs (in the HTTP command line). See HTTP rfc for details.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1708. Bundle.entry:flag.request.url
        Definition

        The URL for this entry, relative to the root (the address to which the request is posted).

        ShortURL for HTTP equivalent of this entry
        Comments

        E.g. for a Patient Create, the method would be "POST" and the URL would be "Patient". For a Patient Update, the method would be PUT and the URL would be "Patient/[id]".

        Control1..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1710. Bundle.entry:flag.request.ifNoneMatch
        Definition

        If the ETag values match, return a 304 Not Modified status. See the API documentation for "Conditional Read".

        ShortFor managing cache currency
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1712. Bundle.entry:flag.request.ifModifiedSince
        Definition

        Only perform the operation if the last updated date matches. See the API documentation for "Conditional Read".

        ShortFor managing cache currency
        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1714. Bundle.entry:flag.request.ifMatch
        Definition

        Only perform the operation if the Etag value matches. For more information, see the API section "Managing Resource Contention".

        ShortFor managing update contention
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1716. Bundle.entry:flag.request.ifNoneExist
        Definition

        Instruct the server not to perform the create if a specified resource already exists. For further information, see the API documentation for "Conditional Create". This is just the query portion of the URL - what follows the "?" (not including the "?").

        ShortFor conditional creates
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1718. Bundle.entry:flag.response
        Definition

        Indicates the results of processing the corresponding 'request' entry in the batch or transaction being responded to or what the results of an operation where when returning history.

        ShortResults of execution (transaction/batch/history)
        Control0..1
        This element is affected by the following invariants: bdl-4
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1720. Bundle.entry:flag.response.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1722. Bundle.entry:flag.response.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1724. Bundle.entry:flag.response.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1726. Bundle.entry:flag.response.status
        Definition

        The status code returned by processing this entry. The status SHALL start with a 3 digit HTTP code (e.g. 404) and may contain the standard HTTP description associated with the status code.

        ShortStatus response code (text optional)
        Control1..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1728. Bundle.entry:flag.response.location
        Definition

        The location header created by processing this operation, populated if the operation returns a location.

        ShortThe location (if the operation returns a location)
        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1730. Bundle.entry:flag.response.etag
        Definition

        The Etag for the resource, if the operation for the entry produced a versioned resource (see Resource Metadata and Versioning and Managing Resource Contention).

        ShortThe Etag for the resource (if relevant)
        Comments

        Etags match the Resource.meta.versionId. The ETag has to match the version id in the header if a resource is included.

        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1732. Bundle.entry:flag.response.lastModified
        Definition

        The date/time that the resource was modified on the server.

        ShortServer's date time modified
        Comments

        This has to match the same time in the meta header (meta.lastUpdated) if a resource is included.

        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1734. Bundle.entry:flag.response.outcome
        Definition

        An OperationOutcome containing hints and warnings produced as part of processing this entry in a batch or transaction.

        ShortOperationOutcome with hints and warnings (for batch/transaction)
        Comments

        For a POST/PUT operation, this is the equivalent outcome that would be returned for prefer = operationoutcome - except that the resource is always returned whether or not the outcome is returned.

        This outcome is not used for error responses in batch/transaction, only for hints and warnings. In a batch operation, the error will be in Bundle.entry.response, and for transaction, there will be a single OperationOutcome instead of a bundle in the case of an error.

        Control0..1
        TypeResource
        Is Modifierfalse
        Summarytrue
        1736. Bundle.entry:clinicalimpression
        Slice Nameclinicalimpression
        Definition

        An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

        ShortEntry in the bundle - will have a resource or information
        Control0..*
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
        bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
        ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1738. Bundle.entry:clinicalimpression.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1740. Bundle.entry:clinicalimpression.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1742. Bundle.entry:clinicalimpression.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1744. Bundle.entry:clinicalimpression.link
        Definition

        A series of links that provide context to this entry.

        ShortLinks related to this entry
        Control0..*
        TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1746. Bundle.entry:clinicalimpression.fullUrl
        Definition

        The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

        • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
        • Results from operations might involve resources that are not identified.
        ShortURI for resource (Absolute URL server address or URI for UUID/OID)
        Comments

        fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

        Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1748. Bundle.entry:clinicalimpression.resource
        Definition

        The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

        ShortA resource in the bundle
        Control1..1
        TypeClinicalImpression
        Is Modifierfalse
        Summarytrue
        1750. Bundle.entry:clinicalimpression.search
        Definition

        Information about the search process that lead to the creation of this entry.

        ShortSearch related information
        Control0..1
        This element is affected by the following invariants: bdl-2
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1752. Bundle.entry:clinicalimpression.search.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1754. Bundle.entry:clinicalimpression.search.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1756. Bundle.entry:clinicalimpression.search.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1758. Bundle.entry:clinicalimpression.search.mode
        Definition

        Why this entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

        Shortmatch | include | outcome - why this is in the result set
        Comments

        There is only one mode. In some corner cases, a resource may be included because it is both a match and an include. In these circumstances, 'match' takes precedence.

        Control0..1
        BindingThe codes SHALL be taken from SearchEntryMode
        (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

        Why an entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1760. Bundle.entry:clinicalimpression.search.score
        Definition

        When searching, the server's search ranking score for the entry.

        ShortSearch ranking (between 0 and 1)
        Comments

        Servers are not required to return a ranking score. 1 is most relevant, and 0 is least relevant. Often, search results are sorted by score, but the client may specify a different sort order.

        See Patient Match for the EMPI search which relates to this element.

        Control0..1
        Typedecimal
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1762. Bundle.entry:clinicalimpression.request
        Definition

        Additional information about how this entry should be processed as part of a transaction or batch. For history, it shows how the entry was processed to create the version contained in the entry.

        ShortAdditional execution information (transaction/batch/history)
        Control0..1
        This element is affected by the following invariants: bdl-3
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1764. Bundle.entry:clinicalimpression.request.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1766. Bundle.entry:clinicalimpression.request.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1768. Bundle.entry:clinicalimpression.request.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1770. Bundle.entry:clinicalimpression.request.method
        Definition

        In a transaction or batch, this is the HTTP action to be executed for this entry. In a history bundle, this indicates the HTTP action that occurred.

        ShortGET | HEAD | POST | PUT | DELETE | PATCH
        Control1..1
        BindingThe codes SHALL be taken from HTTPVerb
        (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

        HTTP verbs (in the HTTP command line). See HTTP rfc for details.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1772. Bundle.entry:clinicalimpression.request.url
        Definition

        The URL for this entry, relative to the root (the address to which the request is posted).

        ShortURL for HTTP equivalent of this entry
        Comments

        E.g. for a Patient Create, the method would be "POST" and the URL would be "Patient". For a Patient Update, the method would be PUT and the URL would be "Patient/[id]".

        Control1..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1774. Bundle.entry:clinicalimpression.request.ifNoneMatch
        Definition

        If the ETag values match, return a 304 Not Modified status. See the API documentation for "Conditional Read".

        ShortFor managing cache currency
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1776. Bundle.entry:clinicalimpression.request.ifModifiedSince
        Definition

        Only perform the operation if the last updated date matches. See the API documentation for "Conditional Read".

        ShortFor managing cache currency
        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1778. Bundle.entry:clinicalimpression.request.ifMatch
        Definition

        Only perform the operation if the Etag value matches. For more information, see the API section "Managing Resource Contention".

        ShortFor managing update contention
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1780. Bundle.entry:clinicalimpression.request.ifNoneExist
        Definition

        Instruct the server not to perform the create if a specified resource already exists. For further information, see the API documentation for "Conditional Create". This is just the query portion of the URL - what follows the "?" (not including the "?").

        ShortFor conditional creates
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1782. Bundle.entry:clinicalimpression.response
        Definition

        Indicates the results of processing the corresponding 'request' entry in the batch or transaction being responded to or what the results of an operation where when returning history.

        ShortResults of execution (transaction/batch/history)
        Control0..1
        This element is affected by the following invariants: bdl-4
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1784. Bundle.entry:clinicalimpression.response.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1786. Bundle.entry:clinicalimpression.response.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1788. Bundle.entry:clinicalimpression.response.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1790. Bundle.entry:clinicalimpression.response.status
        Definition

        The status code returned by processing this entry. The status SHALL start with a 3 digit HTTP code (e.g. 404) and may contain the standard HTTP description associated with the status code.

        ShortStatus response code (text optional)
        Control1..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1792. Bundle.entry:clinicalimpression.response.location
        Definition

        The location header created by processing this operation, populated if the operation returns a location.

        ShortThe location (if the operation returns a location)
        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1794. Bundle.entry:clinicalimpression.response.etag
        Definition

        The Etag for the resource, if the operation for the entry produced a versioned resource (see Resource Metadata and Versioning and Managing Resource Contention).

        ShortThe Etag for the resource (if relevant)
        Comments

        Etags match the Resource.meta.versionId. The ETag has to match the version id in the header if a resource is included.

        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1796. Bundle.entry:clinicalimpression.response.lastModified
        Definition

        The date/time that the resource was modified on the server.

        ShortServer's date time modified
        Comments

        This has to match the same time in the meta header (meta.lastUpdated) if a resource is included.

        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1798. Bundle.entry:clinicalimpression.response.outcome
        Definition

        An OperationOutcome containing hints and warnings produced as part of processing this entry in a batch or transaction.

        ShortOperationOutcome with hints and warnings (for batch/transaction)
        Comments

        For a POST/PUT operation, this is the equivalent outcome that would be returned for prefer = operationoutcome - except that the resource is always returned whether or not the outcome is returned.

        This outcome is not used for error responses in batch/transaction, only for hints and warnings. In a batch operation, the error will be in Bundle.entry.response, and for transaction, there will be a single OperationOutcome instead of a bundle in the case of an error.

        Control0..1
        TypeResource
        Is Modifierfalse
        Summarytrue
        1800. Bundle.entry:careplan
        Slice Namecareplan
        Definition

        An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

        ShortEntry in the bundle - will have a resource or information
        Control0..*
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
        bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
        ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1802. Bundle.entry:careplan.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1804. Bundle.entry:careplan.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1806. Bundle.entry:careplan.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1808. Bundle.entry:careplan.link
        Definition

        A series of links that provide context to this entry.

        ShortLinks related to this entry
        Control0..*
        TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1810. Bundle.entry:careplan.fullUrl
        Definition

        The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

        • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
        • Results from operations might involve resources that are not identified.
        ShortURI for resource (Absolute URL server address or URI for UUID/OID)
        Comments

        fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

        Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1812. Bundle.entry:careplan.resource
        Definition

        The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

        ShortA resource in the bundle
        Control1..1
        TypeCarePlan
        Is Modifierfalse
        Summarytrue
        1814. Bundle.entry:careplan.search
        Definition

        Information about the search process that lead to the creation of this entry.

        ShortSearch related information
        Control0..1
        This element is affected by the following invariants: bdl-2
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1816. Bundle.entry:careplan.search.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1818. Bundle.entry:careplan.search.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1820. Bundle.entry:careplan.search.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1822. Bundle.entry:careplan.search.mode
        Definition

        Why this entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

        Shortmatch | include | outcome - why this is in the result set
        Comments

        There is only one mode. In some corner cases, a resource may be included because it is both a match and an include. In these circumstances, 'match' takes precedence.

        Control0..1
        BindingThe codes SHALL be taken from SearchEntryMode
        (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

        Why an entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1824. Bundle.entry:careplan.search.score
        Definition

        When searching, the server's search ranking score for the entry.

        ShortSearch ranking (between 0 and 1)
        Comments

        Servers are not required to return a ranking score. 1 is most relevant, and 0 is least relevant. Often, search results are sorted by score, but the client may specify a different sort order.

        See Patient Match for the EMPI search which relates to this element.

        Control0..1
        Typedecimal
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1826. Bundle.entry:careplan.request
        Definition

        Additional information about how this entry should be processed as part of a transaction or batch. For history, it shows how the entry was processed to create the version contained in the entry.

        ShortAdditional execution information (transaction/batch/history)
        Control0..1
        This element is affected by the following invariants: bdl-3
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1828. Bundle.entry:careplan.request.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1830. Bundle.entry:careplan.request.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1832. Bundle.entry:careplan.request.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1834. Bundle.entry:careplan.request.method
        Definition

        In a transaction or batch, this is the HTTP action to be executed for this entry. In a history bundle, this indicates the HTTP action that occurred.

        ShortGET | HEAD | POST | PUT | DELETE | PATCH
        Control1..1
        BindingThe codes SHALL be taken from HTTPVerb
        (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

        HTTP verbs (in the HTTP command line). See HTTP rfc for details.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1836. Bundle.entry:careplan.request.url
        Definition

        The URL for this entry, relative to the root (the address to which the request is posted).

        ShortURL for HTTP equivalent of this entry
        Comments

        E.g. for a Patient Create, the method would be "POST" and the URL would be "Patient". For a Patient Update, the method would be PUT and the URL would be "Patient/[id]".

        Control1..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1838. Bundle.entry:careplan.request.ifNoneMatch
        Definition

        If the ETag values match, return a 304 Not Modified status. See the API documentation for "Conditional Read".

        ShortFor managing cache currency
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1840. Bundle.entry:careplan.request.ifModifiedSince
        Definition

        Only perform the operation if the last updated date matches. See the API documentation for "Conditional Read".

        ShortFor managing cache currency
        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1842. Bundle.entry:careplan.request.ifMatch
        Definition

        Only perform the operation if the Etag value matches. For more information, see the API section "Managing Resource Contention".

        ShortFor managing update contention
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1844. Bundle.entry:careplan.request.ifNoneExist
        Definition

        Instruct the server not to perform the create if a specified resource already exists. For further information, see the API documentation for "Conditional Create". This is just the query portion of the URL - what follows the "?" (not including the "?").

        ShortFor conditional creates
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1846. Bundle.entry:careplan.response
        Definition

        Indicates the results of processing the corresponding 'request' entry in the batch or transaction being responded to or what the results of an operation where when returning history.

        ShortResults of execution (transaction/batch/history)
        Control0..1
        This element is affected by the following invariants: bdl-4
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1848. Bundle.entry:careplan.response.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1850. Bundle.entry:careplan.response.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1852. Bundle.entry:careplan.response.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1854. Bundle.entry:careplan.response.status
        Definition

        The status code returned by processing this entry. The status SHALL start with a 3 digit HTTP code (e.g. 404) and may contain the standard HTTP description associated with the status code.

        ShortStatus response code (text optional)
        Control1..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1856. Bundle.entry:careplan.response.location
        Definition

        The location header created by processing this operation, populated if the operation returns a location.

        ShortThe location (if the operation returns a location)
        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1858. Bundle.entry:careplan.response.etag
        Definition

        The Etag for the resource, if the operation for the entry produced a versioned resource (see Resource Metadata and Versioning and Managing Resource Contention).

        ShortThe Etag for the resource (if relevant)
        Comments

        Etags match the Resource.meta.versionId. The ETag has to match the version id in the header if a resource is included.

        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1860. Bundle.entry:careplan.response.lastModified
        Definition

        The date/time that the resource was modified on the server.

        ShortServer's date time modified
        Comments

        This has to match the same time in the meta header (meta.lastUpdated) if a resource is included.

        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1862. Bundle.entry:careplan.response.outcome
        Definition

        An OperationOutcome containing hints and warnings produced as part of processing this entry in a batch or transaction.

        ShortOperationOutcome with hints and warnings (for batch/transaction)
        Comments

        For a POST/PUT operation, this is the equivalent outcome that would be returned for prefer = operationoutcome - except that the resource is always returned whether or not the outcome is returned.

        This outcome is not used for error responses in batch/transaction, only for hints and warnings. In a batch operation, the error will be in Bundle.entry.response, and for transaction, there will be a single OperationOutcome instead of a bundle in the case of an error.

        Control0..1
        TypeResource
        Is Modifierfalse
        Summarytrue
        1864. Bundle.entry:consent
        Slice Nameconsent
        Definition

        An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

        ShortEntry in the bundle - will have a resource or information
        Control0..*
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
        bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
        ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1866. Bundle.entry:consent.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1868. Bundle.entry:consent.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1870. Bundle.entry:consent.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1872. Bundle.entry:consent.link
        Definition

        A series of links that provide context to this entry.

        ShortLinks related to this entry
        Control0..*
        TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1874. Bundle.entry:consent.fullUrl
        Definition

        The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

        • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
        • Results from operations might involve resources that are not identified.
        ShortURI for resource (Absolute URL server address or URI for UUID/OID)
        Comments

        fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

        Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1876. Bundle.entry:consent.resource
        Definition

        The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

        ShortA resource in the bundle
        Control1..1
        TypeConsent
        Is Modifierfalse
        Summarytrue
        1878. Bundle.entry:consent.search
        Definition

        Information about the search process that lead to the creation of this entry.

        ShortSearch related information
        Control0..1
        This element is affected by the following invariants: bdl-2
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1880. Bundle.entry:consent.search.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1882. Bundle.entry:consent.search.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1884. Bundle.entry:consent.search.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1886. Bundle.entry:consent.search.mode
        Definition

        Why this entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

        Shortmatch | include | outcome - why this is in the result set
        Comments

        There is only one mode. In some corner cases, a resource may be included because it is both a match and an include. In these circumstances, 'match' takes precedence.

        Control0..1
        BindingThe codes SHALL be taken from SearchEntryMode
        (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

        Why an entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1888. Bundle.entry:consent.search.score
        Definition

        When searching, the server's search ranking score for the entry.

        ShortSearch ranking (between 0 and 1)
        Comments

        Servers are not required to return a ranking score. 1 is most relevant, and 0 is least relevant. Often, search results are sorted by score, but the client may specify a different sort order.

        See Patient Match for the EMPI search which relates to this element.

        Control0..1
        Typedecimal
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1890. Bundle.entry:consent.request
        Definition

        Additional information about how this entry should be processed as part of a transaction or batch. For history, it shows how the entry was processed to create the version contained in the entry.

        ShortAdditional execution information (transaction/batch/history)
        Control0..1
        This element is affected by the following invariants: bdl-3
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1892. Bundle.entry:consent.request.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1894. Bundle.entry:consent.request.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1896. Bundle.entry:consent.request.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1898. Bundle.entry:consent.request.method
        Definition

        In a transaction or batch, this is the HTTP action to be executed for this entry. In a history bundle, this indicates the HTTP action that occurred.

        ShortGET | HEAD | POST | PUT | DELETE | PATCH
        Control1..1
        BindingThe codes SHALL be taken from HTTPVerb
        (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

        HTTP verbs (in the HTTP command line). See HTTP rfc for details.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1900. Bundle.entry:consent.request.url
        Definition

        The URL for this entry, relative to the root (the address to which the request is posted).

        ShortURL for HTTP equivalent of this entry
        Comments

        E.g. for a Patient Create, the method would be "POST" and the URL would be "Patient". For a Patient Update, the method would be PUT and the URL would be "Patient/[id]".

        Control1..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1902. Bundle.entry:consent.request.ifNoneMatch
        Definition

        If the ETag values match, return a 304 Not Modified status. See the API documentation for "Conditional Read".

        ShortFor managing cache currency
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1904. Bundle.entry:consent.request.ifModifiedSince
        Definition

        Only perform the operation if the last updated date matches. See the API documentation for "Conditional Read".

        ShortFor managing cache currency
        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1906. Bundle.entry:consent.request.ifMatch
        Definition

        Only perform the operation if the Etag value matches. For more information, see the API section "Managing Resource Contention".

        ShortFor managing update contention
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1908. Bundle.entry:consent.request.ifNoneExist
        Definition

        Instruct the server not to perform the create if a specified resource already exists. For further information, see the API documentation for "Conditional Create". This is just the query portion of the URL - what follows the "?" (not including the "?").

        ShortFor conditional creates
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1910. Bundle.entry:consent.response
        Definition

        Indicates the results of processing the corresponding 'request' entry in the batch or transaction being responded to or what the results of an operation where when returning history.

        ShortResults of execution (transaction/batch/history)
        Control0..1
        This element is affected by the following invariants: bdl-4
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1912. Bundle.entry:consent.response.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1914. Bundle.entry:consent.response.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1916. Bundle.entry:consent.response.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1918. Bundle.entry:consent.response.status
        Definition

        The status code returned by processing this entry. The status SHALL start with a 3 digit HTTP code (e.g. 404) and may contain the standard HTTP description associated with the status code.

        ShortStatus response code (text optional)
        Control1..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1920. Bundle.entry:consent.response.location
        Definition

        The location header created by processing this operation, populated if the operation returns a location.

        ShortThe location (if the operation returns a location)
        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1922. Bundle.entry:consent.response.etag
        Definition

        The Etag for the resource, if the operation for the entry produced a versioned resource (see Resource Metadata and Versioning and Managing Resource Contention).

        ShortThe Etag for the resource (if relevant)
        Comments

        Etags match the Resource.meta.versionId. The ETag has to match the version id in the header if a resource is included.

        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1924. Bundle.entry:consent.response.lastModified
        Definition

        The date/time that the resource was modified on the server.

        ShortServer's date time modified
        Comments

        This has to match the same time in the meta header (meta.lastUpdated) if a resource is included.

        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1926. Bundle.entry:consent.response.outcome
        Definition

        An OperationOutcome containing hints and warnings produced as part of processing this entry in a batch or transaction.

        ShortOperationOutcome with hints and warnings (for batch/transaction)
        Comments

        For a POST/PUT operation, this is the equivalent outcome that would be returned for prefer = operationoutcome - except that the resource is always returned whether or not the outcome is returned.

        This outcome is not used for error responses in batch/transaction, only for hints and warnings. In a batch operation, the error will be in Bundle.entry.response, and for transaction, there will be a single OperationOutcome instead of a bundle in the case of an error.

        Control0..1
        TypeResource
        Is Modifierfalse
        Summarytrue
        1928. Bundle.entry:documentreference
        Slice Namedocumentreference
        Definition

        An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

        ShortEntry in the bundle - will have a resource or information
        Control0..*
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsbdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
        bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
        ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1930. Bundle.entry:documentreference.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1932. Bundle.entry:documentreference.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1934. Bundle.entry:documentreference.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1936. Bundle.entry:documentreference.link
        Definition

        A series of links that provide context to this entry.

        ShortLinks related to this entry
        Control0..*
        TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1938. Bundle.entry:documentreference.fullUrl
        Definition

        The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

        • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
        • Results from operations might involve resources that are not identified.
        ShortURI for resource (Absolute URL server address or URI for UUID/OID)
        Comments

        fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

        Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1940. Bundle.entry:documentreference.resource
        Definition

        The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

        ShortA resource in the bundle
        Control1..1
        TypeDocumentReference
        Is Modifierfalse
        Summarytrue
        1942. Bundle.entry:documentreference.search
        Definition

        Information about the search process that lead to the creation of this entry.

        ShortSearch related information
        Control0..1
        This element is affected by the following invariants: bdl-2
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1944. Bundle.entry:documentreference.search.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1946. Bundle.entry:documentreference.search.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1948. Bundle.entry:documentreference.search.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1950. Bundle.entry:documentreference.search.mode
        Definition

        Why this entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

        Shortmatch | include | outcome - why this is in the result set
        Comments

        There is only one mode. In some corner cases, a resource may be included because it is both a match and an include. In these circumstances, 'match' takes precedence.

        Control0..1
        BindingThe codes SHALL be taken from SearchEntryMode
        (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

        Why an entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1952. Bundle.entry:documentreference.search.score
        Definition

        When searching, the server's search ranking score for the entry.

        ShortSearch ranking (between 0 and 1)
        Comments

        Servers are not required to return a ranking score. 1 is most relevant, and 0 is least relevant. Often, search results are sorted by score, but the client may specify a different sort order.

        See Patient Match for the EMPI search which relates to this element.

        Control0..1
        Typedecimal
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1954. Bundle.entry:documentreference.request
        Definition

        Additional information about how this entry should be processed as part of a transaction or batch. For history, it shows how the entry was processed to create the version contained in the entry.

        ShortAdditional execution information (transaction/batch/history)
        Control0..1
        This element is affected by the following invariants: bdl-3
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1956. Bundle.entry:documentreference.request.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1958. Bundle.entry:documentreference.request.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1960. Bundle.entry:documentreference.request.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1962. Bundle.entry:documentreference.request.method
        Definition

        In a transaction or batch, this is the HTTP action to be executed for this entry. In a history bundle, this indicates the HTTP action that occurred.

        ShortGET | HEAD | POST | PUT | DELETE | PATCH
        Control1..1
        BindingThe codes SHALL be taken from HTTPVerb
        (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

        HTTP verbs (in the HTTP command line). See HTTP rfc for details.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1964. Bundle.entry:documentreference.request.url
        Definition

        The URL for this entry, relative to the root (the address to which the request is posted).

        ShortURL for HTTP equivalent of this entry
        Comments

        E.g. for a Patient Create, the method would be "POST" and the URL would be "Patient". For a Patient Update, the method would be PUT and the URL would be "Patient/[id]".

        Control1..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1966. Bundle.entry:documentreference.request.ifNoneMatch
        Definition

        If the ETag values match, return a 304 Not Modified status. See the API documentation for "Conditional Read".

        ShortFor managing cache currency
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1968. Bundle.entry:documentreference.request.ifModifiedSince
        Definition

        Only perform the operation if the last updated date matches. See the API documentation for "Conditional Read".

        ShortFor managing cache currency
        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1970. Bundle.entry:documentreference.request.ifMatch
        Definition

        Only perform the operation if the Etag value matches. For more information, see the API section "Managing Resource Contention".

        ShortFor managing update contention
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1972. Bundle.entry:documentreference.request.ifNoneExist
        Definition

        Instruct the server not to perform the create if a specified resource already exists. For further information, see the API documentation for "Conditional Create". This is just the query portion of the URL - what follows the "?" (not including the "?").

        ShortFor conditional creates
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1974. Bundle.entry:documentreference.response
        Definition

        Indicates the results of processing the corresponding 'request' entry in the batch or transaction being responded to or what the results of an operation where when returning history.

        ShortResults of execution (transaction/batch/history)
        Control0..1
        This element is affected by the following invariants: bdl-4
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1976. Bundle.entry:documentreference.response.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        1978. Bundle.entry:documentreference.response.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1980. Bundle.entry:documentreference.response.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        1982. Bundle.entry:documentreference.response.status
        Definition

        The status code returned by processing this entry. The status SHALL start with a 3 digit HTTP code (e.g. 404) and may contain the standard HTTP description associated with the status code.

        ShortStatus response code (text optional)
        Control1..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1984. Bundle.entry:documentreference.response.location
        Definition

        The location header created by processing this operation, populated if the operation returns a location.

        ShortThe location (if the operation returns a location)
        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1986. Bundle.entry:documentreference.response.etag
        Definition

        The Etag for the resource, if the operation for the entry produced a versioned resource (see Resource Metadata and Versioning and Managing Resource Contention).

        ShortThe Etag for the resource (if relevant)
        Comments

        Etags match the Resource.meta.versionId. The ETag has to match the version id in the header if a resource is included.

        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1988. Bundle.entry:documentreference.response.lastModified
        Definition

        The date/time that the resource was modified on the server.

        ShortServer's date time modified
        Comments

        This has to match the same time in the meta header (meta.lastUpdated) if a resource is included.

        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        1990. Bundle.entry:documentreference.response.outcome
        Definition

        An OperationOutcome containing hints and warnings produced as part of processing this entry in a batch or transaction.

        ShortOperationOutcome with hints and warnings (for batch/transaction)
        Comments

        For a POST/PUT operation, this is the equivalent outcome that would be returned for prefer = operationoutcome - except that the resource is always returned whether or not the outcome is returned.

        This outcome is not used for error responses in batch/transaction, only for hints and warnings. In a batch operation, the error will be in Bundle.entry.response, and for transaction, there will be a single OperationOutcome instead of a bundle in the case of an error.

        Control0..1
        TypeResource
        Is Modifierfalse
        Summarytrue
        1992. Bundle.signature
        Definition

        Digital Signature - base64 encoded. XML-DSig or a JWT.

        ShortDigital Signature
        Comments

        The signature could be created by the "author" of the bundle or by the originating device. Requirements around inclusion of a signature, verification of signatures and treatment of signed/non-signed bundles is implementation-environment specific.

        Control0..1
        TypeSignature
        Is Modifierfalse
        Summarytrue
        Requirements

        A Signature holds an electronic representation of a signature and its supporting context in a FHIR accessible form. The signature may either be a cryptographic type (XML DigSig or a JWS), which is able to provide non-repudiation proof, or it may be a graphical image that represents a signature or a signature process. This element allows capturing signatures on documents, messages, transactions or even search responses, to support content-authentication, non-repudiation or other business cases. This is primarily relevant where the bundle may travel through multiple hops or via other mechanisms where HTTPS non-repudiation is insufficient.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))