Evidence Based Medicine on FHIR Implementation Guide
1.0.0-ballot2 - STU 1 ballot International flag

This page is part of the Evidence Based Medicine on FHIR Implementation Guide (v1.0.0-ballot2: STU1 Ballot 2) based on FHIR (HL7® FHIR® Standard) v6.0.0. No current official version has been published yet. For a full list of available versions, see the Directory of published versions

Resource Profile: StatisticModel - Detailed Descriptions

Page standards status: Draft Maturity Level: 1

Definitions for the statistic-model resource profile.

Guidance on how to interpret the contents of this table can be found here

0. Evidence
Definition

The Evidence Resource provides a machine-interpretable expression of an evidence concept including the evidence variables (e.g., population, exposures/interventions, comparators, outcomes, measured variables, confounding variables), the statistics, and the certainty of this evidence.

ShortSingle evidence bit
Control0..*
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantscnl-0: Name should be usable as an identifier for the module by machine processing applications such as code generation (name.exists() implies name.matches('^[A-Z]([A-Za-z0-9_]){1,254}$'))
2. Evidence.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. Evidence.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

ShortContained, inline Resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.

Control0..*
This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5
TypeResource
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate Namesinline resources, anonymous resources, contained resources
6. Evidence.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on Evidence.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 8. Evidence.extension:citeAs
    Slice NameciteAs
    Definition

    Display of suggested citation for this Resource.

    ShortCitation for this Resource
    Control0..1
    TypeExtension(CiteAs) (Extension Type: markdown)
    Is Modifierfalse
    Must Supportfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    10. Evidence.extension:relatesTo
    Slice NamerelatesTo
    Definition

    Resource (FHIR or non-FHIR) associated with the Resource.

    ShortRelated artifact
    Control0..*
    TypeExtension(RelatesTo) (Complex Extension)
    Is Modifierfalse
    Must Supportfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    12. Evidence.extension:RelatesToWithQuotation
    Slice NameRelatesToWithQuotation
    Definition

    Resource (FHIR or non-FHIR) associated with the Resource, plus specification of a portion quoted from the Resource.

    ShortRelated artifact with quoted portion
    Control0..*
    TypeExtension(RelatesToWithQuotation) (Complex Extension)
    Is Modifierfalse
    Must Supportfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    14. Evidence.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
    Must Supportfalse
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    16. Evidence.status
    Definition

    The status of this summary. Enables tracking the life-cycle of the content.

    Shortdraft | active | retired | unknown
    Comments

    Allows filtering of summarys s that are appropriate for use versus not.

    See guidance around (not) making local changes to elements here.


    Allows filtering of summarys s that are appropriate for use versus not.

    See guidance around (not) making local changes to elements here.

    Control1..1
    BindingThe codes SHALL be taken from PublicationStatushttp://hl7.org/fhir/ValueSet/publication-status|6.0.0-ballot2
    (required to http://hl7.org/fhir/ValueSet/publication-status|6.0.0-ballot2)

    The lifecycle status of an artifact.

    Typecode
    Is Modifiertrue because This is labeled as "Is Modifier" because applications should not use a retired {{title}} without due consideration
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supportfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    18. Evidence.variableDefinition
    Definition

    Evidence variable such as population, exposure, or outcome.

    ShortEvidence variable such as population, exposure, or outcome
    Control1..*
    TypeBackboneElement
    Is Modifierfalse
    Must Supportfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    20. Evidence.variableDefinition.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    22. Evidence.variableDefinition.variableRole
    Definition

    Classification of the role of the variable.

    Shortpopulation | exposure | outcome | covariate
    Control1..1
    BindingThe codes SHALL be taken from EvidenceVariableRolehttp://hl7.org/fhir/ValueSet/variable-role|6.0.0-ballot2
    (required to http://hl7.org/fhir/ValueSet/variable-role|6.0.0-ballot2)

    The role that the variable plays.

    Typecode
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supportfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

    Guidance on how to interpret the contents of this table can be found here

    0. Evidence
    2. Evidence.extension
    SlicingThis element introduces a set of slices on Evidence.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • 4. Evidence.extension:citeAs
      Slice NameciteAs
      Control0..1
      TypeExtension(CiteAs) (Extension Type: markdown)
      6. Evidence.extension:relatesTo
      Slice NamerelatesTo
      Control0..*
      TypeExtension(RelatesTo) (Complex Extension)
      8. Evidence.extension:RelatesToWithQuotation
      Slice NameRelatesToWithQuotation
      Control0..*
      TypeExtension(RelatesToWithQuotation) (Complex Extension)
      10. Evidence.statistic
      12. Evidence.statistic.extension
      SlicingThis element introduces a set of slices on Evidence.statistic.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 14. Evidence.statistic.extension:modelExpression
        Slice NamemodelExpression
        Control0..1
        TypeExtension(StatisticModelExpression) (Extension Type: Expression)
        16. Evidence.statistic.modelCharacteristic
        18. Evidence.statistic.modelCharacteristic.extension
        SlicingThis element introduces a set of slices on Evidence.statistic.modelCharacteristic.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 20. Evidence.statistic.modelCharacteristic.extension:includeIf
          Slice NameincludeIf
          Control0..1
          TypeExtension(StatisticModelIncludeIf) (Complex Extension)
          22. Evidence.statistic.modelCharacteristic.variable
          24. Evidence.statistic.modelCharacteristic.variable.extension
          SlicingThis element introduces a set of slices on Evidence.statistic.modelCharacteristic.variable.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ url
          • 26. Evidence.statistic.modelCharacteristic.variable.extension:includeIf
            Slice NameincludeIf
            Control0..1
            TypeExtension(StatisticModelIncludeIf) (Complex Extension)

            Guidance on how to interpret the contents of this table can be found here

            0. Evidence
            Definition

            The Evidence Resource provides a machine-interpretable expression of an evidence concept including the evidence variables (e.g., population, exposures/interventions, comparators, outcomes, measured variables, confounding variables), the statistics, and the certainty of this evidence.

            ShortSingle evidence bit
            Control0..*
            Is Modifierfalse
            Must Supportfalse
            Summaryfalse
            Invariantscnl-0: Name should be usable as an identifier for the module by machine processing applications such as code generation (name.exists() implies name.matches('^[A-Z]([A-Za-z0-9_]){1,254}$'))
            2. Evidence.id
            Definition

            The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

            ShortLogical id of this artifact
            Comments

            Within the context of the FHIR RESTful interactions, the resource has an id except for cases like the create and conditional update. Otherwise, the use of the resouce id depends on the given use case.

            Control0..1
            Typeid
            Is Modifierfalse
            Must Supportfalse
            Summarytrue
            4. Evidence.meta
            Definition

            The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

            ShortMetadata about the resource
            Control0..1
            TypeMeta
            Is Modifierfalse
            Must Supportfalse
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            6. Evidence.implicitRules
            Definition

            A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

            ShortA set of rules under which this content was created
            Comments

            Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

            Control0..1
            Typeuri
            Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supportfalse
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            8. Evidence.language
            Definition

            The base language in which the resource is written.

            ShortLanguage of the resource content
            Comments

            Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

            Control0..1
            BindingThe codes SHALL be taken from AllLanguages
            (required to http://hl7.org/fhir/ValueSet/all-languages|6.0.0-ballot2)

            IETF language tag for a human language

            Typecode
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supportfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            10. Evidence.text
            Definition

            A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

            ShortText summary of the resource, for human interpretation
            Comments

            Contained resources do not have a narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

            Control0..1
            This element is affected by the following invariants: dom-6
            TypeNarrative
            Is Modifierfalse
            Must Supportfalse
            Summaryfalse
            Alternate Namesnarrative, html, xhtml, display
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            12. Evidence.contained
            Definition

            These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

            ShortContained, inline Resources
            Comments

            This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.

            Control0..*
            This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5
            TypeResource
            Is Modifierfalse
            Must Supportfalse
            Summaryfalse
            Alternate Namesinline resources, anonymous resources, contained resources
            14. Evidence.extension
            Definition

            An Extension

            ShortExtension
            Control0..*
            TypeExtension
            Is Modifierfalse
            Must Supportfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            SlicingThis element introduces a set of slices on Evidence.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • value @ url
            • 16. Evidence.extension:citeAs
              Slice NameciteAs
              Definition

              Display of suggested citation for this Resource.

              ShortCitation for this Resource
              Control0..1
              TypeExtension(CiteAs) (Extension Type: markdown)
              Is Modifierfalse
              Must Supportfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              18. Evidence.extension:relatesTo
              Slice NamerelatesTo
              Definition

              Resource (FHIR or non-FHIR) associated with the Resource.

              ShortRelated artifact
              Control0..*
              TypeExtension(RelatesTo) (Complex Extension)
              Is Modifierfalse
              Must Supportfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              20. Evidence.extension:RelatesToWithQuotation
              Slice NameRelatesToWithQuotation
              Definition

              Resource (FHIR or non-FHIR) associated with the Resource, plus specification of a portion quoted from the Resource.

              ShortRelated artifact with quoted portion
              Control0..*
              TypeExtension(RelatesToWithQuotation) (Complex Extension)
              Is Modifierfalse
              Must Supportfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              22. Evidence.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
              Must Supportfalse
              Summarytrue
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              24. Evidence.url
              Definition

              An absolute URI that is used to identify this evidence when it is referenced in a specification, model, design or an instance; also called its canonical identifier. This SHOULD be globally unique and SHOULD be a literal address at which an authoritative instance of this summary is (or will be) published. This URL can be the target of a canonical reference. It SHALL remain the same when the summary is stored on different servers.

              ShortCanonical identifier for this evidence, represented as a globally unique URI
              Comments

              In some cases, the resource can no longer be found at the stated url, but the url itself cannot change. Implementations can use the meta.source element to indicate where the current master source of the resource can be found.

              Control0..1
              Typeuri
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supportfalse
              Summarytrue
              Requirements

              Allows the evidence to be referenced by a single globally unique identifier.

              Invariantscnl-1: URL should not contain | or # - these characters make processing canonical references problematic (exists() implies matches('^[^|# ]+$'))
              ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              26. Evidence.identifier
              Definition

              A formal identifier that is used to identify this summary when it is represented in other formats, or referenced in a specification, model, design or an instance.

              ShortAdditional identifier for the summary
              Comments

              Typically, this is used for identifiers that can go in an HL7 V3 II (instance identifier) data type, and can then identify this summary outside of FHIR, where it is not possible to use the logical URI.

              NoteThis is a business identifier, not a resource identifier (see discussion)
              Control0..*
              TypeIdentifier
              Is Modifierfalse
              Must Supportfalse
              Summarytrue
              Requirements

              Allows externally provided and/or usable business identifiers to be easily associated with the module.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              28. Evidence.version
              Definition

              The identifier that is used to identify this version of the summary when it is referenced in a specification, model, design or instance. This is an arbitrary value managed by the summary author and is not expected to be globally unique. For example, it might be a timestamp (e.g. yyyymmdd) if a managed version is not available. There is also no expectation that versions can be placed in a lexicographical sequence.

              ShortBusiness version of this summary
              Comments

              The determination of when to create a new version of a resource (same url, new version) vs. defining a new artifact is up to the author. Considerations for making this decision are found in Technical and Business Versions.

              NoteThis is a business version Id, not a resource version Id (see discussion)
              Control0..1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supportfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              30. Evidence.versionAlgorithm[x]
              Definition

              Indicates the mechanism used to compare versions to determine which is more current.

              ShortHow to compare versions
              Comments

              If set as a string, this is a FHIRPath expression that has two additional context variables passed in - %version1 and %version2 and will return a negative number if version1 is newer, a positive number if version2 is newer, and a 0 if the version ordering can't successfully be determined.

              Control0..1
              BindingUnless not suitable, these codes SHALL be taken from VersionAlgorithm
              (extensible to http://hl7.org/fhir/ValueSet/version-algorithm)
              TypeChoice of: string, Coding
              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supportfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              32. Evidence.name
              Definition

              A natural language name identifying the evidence. This name should be usable as an identifier for the module by machine processing applications such as code generation.

              ShortName for this summary (machine friendly)
              Comments

              The name is not expected to be globally unique. The name should be a simple alphanumeric type name to ensure that it is machine-processing friendly.

              Control0..1
              This element is affected by the following invariants: cnl-0
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supportfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              34. Evidence.title
              Definition

              A short, descriptive, user-friendly title for the summary.

              ShortName for this summary (human friendly)
              Control0..1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supportfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              36. Evidence.citeAs[x]
              Definition

              Citation Resource or display of suggested citation for this evidence.

              ShortCitation for this evidence
              Control0..1
              TypeChoice of: Reference(Citation), markdown
              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supportfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              38. Evidence.status
              Definition

              The status of this summary. Enables tracking the life-cycle of the content.

              Shortdraft | active | retired | unknown
              Comments

              Allows filtering of summarys s that are appropriate for use versus not.

              See guidance around (not) making local changes to elements here.

              Control1..1
              BindingThe codes SHALL be taken from PublicationStatus
              (required to http://hl7.org/fhir/ValueSet/publication-status|6.0.0-ballot2)

              The lifecycle status of an artifact.

              Typecode
              Is Modifiertrue because This is labeled as "Is Modifier" because applications should not use a retired {{title}} without due consideration
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supportfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              40. Evidence.experimental
              Definition

              A Boolean value to indicate that this resource is authored for testing purposes (or education/evaluation/marketing) and is not intended to be used for genuine usage.

              ShortFor testing purposes, not real usage
              Control0..1
              Typeboolean
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supportfalse
              Summaryfalse
              Meaning if MissingIf absent, this resource is treated as though it is not experimental.
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              42. Evidence.date
              Definition

              The date (and optionally time) when the summary was last significantly changed. The date must change when the business version changes and it must change if the status code changes. In addition, it should change when the substantive content of the summary changes.

              ShortDate last changed
              Comments

              The date is often not tracked until the resource is published, but may be present on draft content. Note that this is not the same as the resource last-modified-date, since the resource may be a secondary representation of the summary. Additional specific dates may be added as extensions or be found by consulting Provenances associated with past versions of the resource.

              See guidance around (not) making local changes to elements here.

              Control0..1
              TypedateTime
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supportfalse
              Summarytrue
              Alternate NamesRevision Date
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              44. Evidence.approvalDate
              Definition

              The date on which the resource content was approved by the publisher. Approval happens once when the content is officially approved for usage.

              ShortWhen the summary was approved by publisher
              Comments

              The 'date' element may be more recent than the approval date because of minor changes or editorial corrections.

              See guidance around (not) making local changes to elements here.

              Control0..1
              Typedate
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supportfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              46. Evidence.lastReviewDate
              Definition

              The date on which the resource content was last reviewed. Review happens periodically after approval but does not change the original approval date.

              ShortWhen the summary was last reviewed by the publisher
              Comments

              If specified, this date follows the original approval date.

              See guidance around (not) making local changes to elements here.

              Control0..1
              Typedate
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supportfalse
              Summaryfalse
              Requirements

              Gives a sense of how "current" the content is. Resources that have not been reviewed in a long time may have a risk of being less appropriate/relevant.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              48. Evidence.publisher
              Definition

              The name of the organization or individual responsible for the release and ongoing maintenance of the evidence.

              ShortName of the publisher/steward (organization or individual)
              Comments

              Usually an organization but may be an individual. The publisher (or steward) of the evidence is the organization or individual primarily responsible for the maintenance and upkeep of the evidence. This is not necessarily the same individual or organization that developed and initially authored the content. The publisher is the primary point of contact for questions or issues with the evidence. This item SHOULD be populated unless the information is available from context.

              Control0..1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supportfalse
              Summarytrue
              Requirements

              Helps establish the "authority/credibility" of the evidence. May also allow for contact.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              50. Evidence.contact
              Definition

              Contact details to assist a user in finding and communicating with the publisher.

              ShortContact details for the publisher
              Comments

              Extensions to ContactDetail include: contactReference, contactAddress, and contributionTime (see Clinical Reasoning Module).

              See guidance around (not) making local changes to elements here.

              Control0..*
              TypeContactDetail
              Is Modifierfalse
              Must Supportfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              52. Evidence.author
              Definition

              An individiual, organization, or device primarily involved in the creation and maintenance of the content.

              ShortWho authored the content
              Comments

              Extensions to ContactDetail include: contactReference, contactAddress, and contributionTime (see Clinical Reasoning Module).

              Control0..*
              TypeContactDetail
              Is Modifierfalse
              Must Supportfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              54. Evidence.editor
              Definition

              An individiual, organization, or device primarily responsible for internal coherence of the content.

              ShortWho edited the content
              Comments

              Extensions to ContactDetail include: contactReference, contactAddress, and contributionTime (see Clinical Reasoning Module).

              Control0..*
              TypeContactDetail
              Is Modifierfalse
              Must Supportfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              56. Evidence.reviewer
              Definition

              An individiual, organization, or device primarily responsible for review of some aspect of the content.

              ShortWho reviewed the content
              Comments

              Extensions to ContactDetail include: contactReference, contactAddress, and contributionTime (see Clinical Reasoning Module).

              See guidance around (not) making local changes to elements here.

              Control0..*
              TypeContactDetail
              Is Modifierfalse
              Must Supportfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              58. Evidence.endorser
              Definition

              An individiual, organization, or device responsible for officially endorsing the content for use in some setting.

              ShortWho endorsed the content
              Comments

              Extensions to ContactDetail include: contactReference, contactAddress, and contributionTime (see Clinical Reasoning Module).

              See guidance around (not) making local changes to elements here.

              Control0..*
              TypeContactDetail
              Is Modifierfalse
              Must Supportfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              60. Evidence.useContext
              Definition

              The content was developed with a focus and intent of supporting the contexts that are listed. These contexts may be general categories (gender, age, ...) or may be references to specific programs (insurance plans, studies, ...) and may be used to assist with indexing and searching for appropriate evidence instances.

              ShortThe context that the content is intended to support
              Comments

              When multiple useContexts are specified, there is no expectation that all or any of the contexts apply.

              Control0..*
              TypeUsageContext
              Is Modifierfalse
              Must Supportfalse
              Summarytrue
              Requirements

              Assist in searching for appropriate content.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              62. Evidence.purpose
              Definition

              Explanation of why this Evidence is needed and why it has been designed as it has.

              ShortWhy this Evidence is defined
              Comments

              This element does not describe the usage of the Evidence. Instead, it provides traceability of ''why'' the resource is either needed or ''why'' it is defined as it is. This may be used to point to source materials or specifications that drove the structure of this Evidence.

              Control0..1
              Typemarkdown
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supportfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              64. Evidence.copyright
              Definition

              A copyright statement relating to the Evidence and/or its contents. Copyright statements are generally legal restrictions on the use and publishing of the Evidence.

              ShortUse and/or publishing restrictions
              Comments

              The short copyright declaration (e.g. (c) '2015+ xyz organization' should be sent in the copyrightLabel element.

              Control0..1
              Typemarkdown
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supportfalse
              Summaryfalse
              Requirements

              Consumers must be able to determine any legal restrictions on the use of the Evidence and/or its content.

              Alternate NamesLicense, Restrictions
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              66. Evidence.copyrightLabel
              Definition

              A short string (<50 characters), suitable for inclusion in a page footer that identifies the copyright holder, effective period, and optionally whether rights are resctricted. (e.g. 'All rights reserved', 'Some rights reserved').

              ShortCopyright holder and year(s)
              Comments

              The (c) symbol should NOT be included in this string. It will be added by software when rendering the notation. Full details about licensing, restrictions, warrantees, etc. goes in the more general 'copyright' element.

              Control0..1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supportfalse
              Summaryfalse
              Requirements

              Defines the content expected to be rendered in all representations of the artifact.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              68. Evidence.relatedArtifact
              Definition

              Link or citation to artifact associated with the summary.

              ShortLink or citation to artifact associated with the summary
              Comments

              Use type value 'derived-from' to denote the source for the Evidence content. To express exact phrasing in the source material, use a classifier instance with a coding value of 'Quotation' and a text value of the quoted content. The coding value of 'Quotation' can be expressed with a system value of 'http://hl7.org/fhir/provenance-entity-role', a code value of 'quotation' and a display value of 'Quotation'.

              Control0..*
              TypeRelatedArtifact
              Is Modifierfalse
              Must Supportfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              70. Evidence.description
              Definition

              A free text natural language description of the evidence from a consumer's perspective.

              ShortDescription of the particular summary
              Comments

              This description can be used to capture details such as comments about misuse, instructions for clinical use and interpretation, literature references, examples from the paper world, etc. It is not a rendering of the evidence as conveyed in the 'text' field of the resource itself. This item SHOULD be populated unless the information is available from context (e.g. the language of the evidence is presumed to be the predominant language in the place the evidence was created).

              Control0..1
              Typemarkdown
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supportfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              72. Evidence.assertion
              Definition

              Declarative description of the Evidence.

              ShortDeclarative description of the Evidence
              Control0..1
              Typemarkdown
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supportfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              74. Evidence.note
              Definition

              Footnotes and/or explanatory notes.

              ShortFootnotes and/or explanatory notes
              Control0..*
              TypeAnnotation
              Is Modifierfalse
              Must Supportfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              76. Evidence.variableDefinition
              Definition

              Evidence variable such as population, exposure, or outcome.

              ShortEvidence variable such as population, exposure, or outcome
              Control1..*
              TypeBackboneElement
              Is Modifierfalse
              Must Supportfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              78. Evidence.variableDefinition.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              This element is affected by the following invariants: ele-1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              80. Evidence.variableDefinition.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              82. Evidence.variableDefinition.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored even if unrecognized
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
              Summarytrue
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content, modifiers
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              84. Evidence.variableDefinition.description
              Definition

              A text description or summary of the variable.

              ShortA text description or summary of the variable
              Control0..1
              Typemarkdown
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supportfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              86. Evidence.variableDefinition.note
              Definition

              Footnotes and/or explanatory notes.

              ShortFootnotes and/or explanatory notes
              Control0..*
              TypeAnnotation
              Is Modifierfalse
              Must Supportfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              88. Evidence.variableDefinition.variableRole
              Definition

              Classification of the role of the variable.

              Shortpopulation | exposure | outcome | covariate
              Control1..1
              BindingThe codes SHALL be taken from EvidenceVariableRole
              (required to http://hl7.org/fhir/ValueSet/variable-role|6.0.0-ballot2)

              The role that the variable plays.

              Typecode
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supportfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              90. Evidence.variableDefinition.roleSubtype
              Definition

              Sub-classification of the role of the variable.

              Shortsubgroup | variable-A | variable-B | variable-AB | confounder | collider | mediator | effect-modifier
              Control0..1
              BindingUnless not suitable, these codes SHALL be taken from EvidenceVariableRoleSubtype
              (extensible to http://hl7.org/fhir/ValueSet/variable-role-subtype)

              The sub-role that the variable plays.

              TypeCodeableConcept
              Is Modifierfalse
              Must Supportfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              92. Evidence.variableDefinition.comparatorCategory
              Definition

              The reference value used for comparison.

              ShortThe reference value used for comparison
              Comments

              Value should match EvidenceVariable.category.name in the EvidenceVariable referenced in the observed or intended element.

              Control0..1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supportfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              94. Evidence.variableDefinition.observed
              Definition

              Definition of the actual variable related to the statistic(s).

              ShortDefinition of the actual variable related to the statistic(s)
              Control0..1
              TypeReference(Group, EvidenceVariable)
              Is Modifierfalse
              Must Supportfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              96. Evidence.variableDefinition.intended
              Definition

              Definition of the intended variable related to the Evidence.

              ShortDefinition of the intended variable related to the Evidence
              Control0..1
              TypeReference(Group, EvidenceVariable)
              Is Modifierfalse
              Must Supportfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              98. Evidence.variableDefinition.directnessMatch
              Definition

              Indication of quality of match between intended variable to actual variable.

              Shortlow | moderate | high | exact
              Control0..1
              BindingUnless not suitable, these codes SHALL be taken from EvidenceDirectness
              (extensible to http://terminology.hl7.org/ValueSet/directness)

              The quality of how direct the match is.

              TypeCodeableConcept
              Is Modifierfalse
              Must Supportfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              100. Evidence.synthesisType
              Definition

              The method to combine studies.

              ShortThe method to combine studies
              Control0..1
              BindingUnless not suitable, these codes SHALL be taken from StatisticSynthesisType
              (extensible to http://terminology.hl7.org/ValueSet/synthesis-type)

              Types of combining results from a body of evidence (e.g. summary data meta-analysis).

              TypeCodeableConcept
              Is Modifierfalse
              Must Supportfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              102. Evidence.studyDesign
              Definition

              The design of the study that produced this evidence. The design is described with any number of study design characteristics.

              ShortThe design of the study that produced this evidence
              Control0..*
              BindingUnless not suitable, these codes SHALL be taken from StudyDesign
              (extensible to http://hl7.org/fhir/ValueSet/study-design)

              This is a set of terms for study design characteristics.

              TypeCodeableConcept
              Is Modifierfalse
              Must Supportfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              104. Evidence.statistic
              Definition

              Values and parameters for a single statistic.

              ShortValues and parameters for a single statistic
              Control0..*
              TypeBackboneElement
              Is Modifierfalse
              Must Supportfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              106. Evidence.statistic.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              This element is affected by the following invariants: ele-1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              108. Evidence.statistic.extension
              Definition

              An Extension

              ShortExtension
              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              SlicingThis element introduces a set of slices on Evidence.statistic.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
              • value @ url
              • 110. Evidence.statistic.extension:modelExpression
                Slice NamemodelExpression
                Definition

                The formula for analysis.

                ShortThe formula for analysis
                Control0..1
                TypeExtension(StatisticModelExpression) (Extension Type: Expression)
                Is Modifierfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                112. Evidence.statistic.modifierExtension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                ShortExtensions that cannot be ignored even if unrecognized
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                Summarytrue
                Requirements

                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                Alternate Namesextensions, user content, modifiers
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                114. Evidence.statistic.description
                Definition

                A description of the content value of the statistic.

                ShortDescription of content
                Control0..1
                Typemarkdown
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Must Supportfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                116. Evidence.statistic.note
                Definition

                Footnotes and/or explanatory notes.

                ShortFootnotes and/or explanatory notes
                Control0..*
                TypeAnnotation
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                118. Evidence.statistic.statisticType
                Definition

                Type of statistic, e.g., relative risk.

                ShortType of statistic, e.g., relative risk
                Control0..1
                BindingUnless not suitable, these codes SHALL be taken from StatisticType
                (extensible to http://hl7.org/fhir/ValueSet/statistic-type)
                TypeCodeableConcept
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                120. Evidence.statistic.category
                Definition

                When the measured variable is handled categorically, the category element is used to define which category the statistic is reporting.

                ShortAssociated category for categorical variable
                Comments

                Simple strings can be used for descriptive purposes. Exact matching to EvidenceVariable.category.name for the Evidence.variableDefinition[variableRole=measuredVariable].observed=Reference(EvidenceVariable) could facilitate validation within datasets.

                Control0..1
                TypeCodeableConcept
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                122. Evidence.statistic.quantity
                Definition

                Statistic value.

                ShortStatistic value
                Control0..1
                TypeQuantity
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                124. Evidence.statistic.numberOfEvents
                Definition

                The number of events associated with the statistic, where the unit of analysis is different from numberAffected, sampleSize.knownDataCount and sampleSize.numberOfParticipants.

                ShortThe number of events associated with the statistic
                Comments

                When the number of events is the statistic, use Evidence.statistic.quantity and set Evidence.statistic.type.coding.code=C25463 and Evidence.statistic.type.coding.display=Count. When the statistic is an Event Rate (where individual participants may have 2 or more events), use Evidence.statistic.numberOfEvents to record the total number of events rather than the number of participants with events.

                Control0..1
                TypeunsignedInt
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Must Supportfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                126. Evidence.statistic.numberAffected
                Definition

                The number of participants affected where the unit of analysis is the same as sampleSize.knownDataCount and sampleSize.numberOfParticipants.

                ShortThe number of participants affected
                Comments

                When the number affected is the statistic, use Evidence.statistic.quantity and set Evidence.statistic.type.coding.code=C25463 and Evidence.statistic.type.coding.display=Count. When the statistic is a Proportion, use Evidence.statistic.numberAffected and enter an integer as the value. When the statistic is an Event Rate (where individual participants may have 2 or more events), use Evidence.statistic.numberAffected to record the number of participants with events rather than the total number of events.

                Control0..1
                TypeunsignedInt
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Must Supportfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                128. Evidence.statistic.sampleSize
                Definition

                Number of samples in the statistic.

                ShortNumber of samples in the statistic
                Control0..1
                TypeBackboneElement
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                130. Evidence.statistic.sampleSize.id
                Definition

                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                ShortUnique id for inter-element referencing
                Control0..1
                This element is affected by the following invariants: ele-1
                Typestring
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                132. Evidence.statistic.sampleSize.extension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                ShortAdditional content defined by implementations
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifierfalse
                Summaryfalse
                Alternate Namesextensions, user content
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                134. Evidence.statistic.sampleSize.modifierExtension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                ShortExtensions that cannot be ignored even if unrecognized
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                Summarytrue
                Requirements

                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                Alternate Namesextensions, user content, modifiers
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                136. Evidence.statistic.sampleSize.description
                Definition

                Human-readable summary of population sample size.

                ShortTextual description of sample size for statistic
                Control0..1
                Typemarkdown
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Must Supportfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                138. Evidence.statistic.sampleSize.note
                Definition

                Footnote or explanatory note about the sample size.

                ShortFootnote or explanatory note about the sample size
                Control0..*
                TypeAnnotation
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                140. Evidence.statistic.sampleSize.numberOfStudies
                Definition

                Number of participants in the population.

                ShortNumber of contributing studies
                Control0..1
                TypeunsignedInt
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Must Supportfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                142. Evidence.statistic.sampleSize.numberOfParticipants
                Definition

                A human-readable string to clarify or explain concepts about the sample size.

                ShortCumulative number of participants
                Control0..1
                TypeunsignedInt
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Must Supportfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                144. Evidence.statistic.sampleSize.knownDataCount
                Definition

                Number of participants with known results for measured variables.

                ShortNumber of participants with known results for measured variables
                Control0..1
                TypeunsignedInt
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Must Supportfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                146. Evidence.statistic.attributeEstimate
                Definition

                A statistical attribute of the statistic such as a measure of heterogeneity.

                ShortAn attribute of the Statistic
                Control0..*
                TypeBackboneElement
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                148. Evidence.statistic.attributeEstimate.id
                Definition

                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                ShortUnique id for inter-element referencing
                Control0..1
                This element is affected by the following invariants: ele-1
                Typestring
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                150. Evidence.statistic.attributeEstimate.extension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                ShortAdditional content defined by implementations
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifierfalse
                Summaryfalse
                Alternate Namesextensions, user content
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                152. Evidence.statistic.attributeEstimate.modifierExtension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                ShortExtensions that cannot be ignored even if unrecognized
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                Summarytrue
                Requirements

                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                Alternate Namesextensions, user content, modifiers
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                154. Evidence.statistic.attributeEstimate.description
                Definition

                Human-readable summary of the estimate.

                ShortTextual description of the attribute estimate
                Control0..1
                Typemarkdown
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Must Supportfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                156. Evidence.statistic.attributeEstimate.note
                Definition

                Footnote or explanatory note about the estimate.

                ShortFootnote or explanatory note about the estimate
                Control0..*
                TypeAnnotation
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                158. Evidence.statistic.attributeEstimate.type
                Definition

                The type of attribute estimate, e.g., confidence interval or p value.

                ShortThe type of attribute estimate, e.g., confidence interval or p value
                Control0..1
                BindingUnless not suitable, these codes SHALL be taken from AttributeEstimateType
                (extensible to http://hl7.org/fhir/ValueSet/attribute-estimate-type)
                TypeCodeableConcept
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                160. Evidence.statistic.attributeEstimate.quantity
                Definition

                The singular quantity of the attribute estimate, for attribute estimates represented as single values; also used to report unit of measure.

                ShortThe singular quantity of the attribute estimate, for attribute estimates represented as single values; also used to report unit of measure
                Comments

                Often the p value

                Control0..1
                TypeQuantity
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                162. Evidence.statistic.attributeEstimate.level
                Definition

                Use 95 for a 95% confidence interval.

                ShortLevel of confidence interval, e.g., 0.95 for 95% confidence interval
                Control0..1
                Typedecimal
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Must Supportfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                164. Evidence.statistic.attributeEstimate.range
                Definition

                Lower bound of confidence interval.

                ShortLower and upper bound values of the attribute estimate
                Control0..1
                TypeRange
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                166. Evidence.statistic.attributeEstimate.attributeEstimate
                Definition

                A nested attribute estimate; which is the attribute estimate of an attribute estimate.

                ShortA nested attribute estimate; which is the attribute estimate of an attribute estimate
                Comments

                A nested attribute estimate; which is the attribute estimate of an attribute estimate

                Control0..*
                TypeSeettp://hl7.org/fhir/StructureDefinition/Evidence#Evidence.statistic.attributeEstimate
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                168. Evidence.statistic.modelCharacteristic
                Definition

                A component of the method to generate the statistic.

                ShortAn aspect of the statistical model
                Control0..*
                TypeBackboneElement
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                170. Evidence.statistic.modelCharacteristic.id
                Definition

                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                ShortUnique id for inter-element referencing
                Control0..1
                This element is affected by the following invariants: ele-1
                Typestring
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                172. Evidence.statistic.modelCharacteristic.extension
                Definition

                An Extension

                ShortExtension
                Control0..*
                TypeExtension
                Is Modifierfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                SlicingThis element introduces a set of slices on Evidence.statistic.modelCharacteristic.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                • value @ url
                • 174. Evidence.statistic.modelCharacteristic.extension:includeIf
                  Slice NameincludeIf
                  Definition

                  The condition upon which to include the variable or model characteristic in the analysis.

                  ShortCondition upon which to include the variable or model characteristic in the analysis
                  Control0..1
                  TypeExtension(StatisticModelIncludeIf) (Complex Extension)
                  Is Modifierfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  176. Evidence.statistic.modelCharacteristic.modifierExtension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                  ShortExtensions that cannot be ignored even if unrecognized
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                  Summarytrue
                  Requirements

                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                  Alternate Namesextensions, user content, modifiers
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  178. Evidence.statistic.modelCharacteristic.code
                  Definition

                  Description of a component of the method to generate the statistic.

                  ShortModel specification
                  Control1..1
                  BindingUnless not suitable, these codes SHALL be taken from StatisticModelCode
                  (extensible to http://hl7.org/fhir/ValueSet/statistic-model-code)
                  TypeCodeableConcept
                  Is Modifierfalse
                  Must Supportfalse
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  180. Evidence.statistic.modelCharacteristic.value[x]
                  Definition

                  Further specification of the value of the component of the method to generate the statistic.

                  ShortThe specific value (when paired with code)
                  Control0..1
                  TypeChoice of: Quantity(SimpleQuantity), Range, CodeableConcept
                  [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                  Is Modifierfalse
                  Must Supportfalse
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  182. Evidence.statistic.modelCharacteristic.intended
                  Definition

                  The plan for analysis.

                  ShortThe plan for analysis
                  Control0..1
                  Typeboolean
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Must Supportfalse
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  184. Evidence.statistic.modelCharacteristic.applied
                  Definition

                  The analysis that was applied.

                  ShortThe analysis that was applied
                  Control0..1
                  Typeboolean
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Must Supportfalse
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  186. Evidence.statistic.modelCharacteristic.variable
                  Definition

                  A variable adjusted for in the adjusted analysis.

                  ShortA variable adjusted for in the adjusted analysis
                  Control0..*
                  TypeBackboneElement
                  Is Modifierfalse
                  Must Supportfalse
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  188. Evidence.statistic.modelCharacteristic.variable.id
                  Definition

                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                  ShortUnique id for inter-element referencing
                  Control0..1
                  This element is affected by the following invariants: ele-1
                  Typestring
                  Is Modifierfalse
                  XML FormatIn the XML format, this property is represented as an attribute.
                  Summaryfalse
                  190. Evidence.statistic.modelCharacteristic.variable.extension
                  Definition

                  An Extension

                  ShortExtension
                  Control0..*
                  TypeExtension
                  Is Modifierfalse
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  SlicingThis element introduces a set of slices on Evidence.statistic.modelCharacteristic.variable.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                  • value @ url
                  • 192. Evidence.statistic.modelCharacteristic.variable.extension:includeIf
                    Slice NameincludeIf
                    Definition

                    The condition upon which to include the variable or model characteristic in the analysis.

                    ShortCondition upon which to include the variable or model characteristic in the analysis
                    Control0..1
                    TypeExtension(StatisticModelIncludeIf) (Complex Extension)
                    Is Modifierfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    194. Evidence.statistic.modelCharacteristic.variable.modifierExtension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                    ShortExtensions that cannot be ignored even if unrecognized
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                    Summarytrue
                    Requirements

                    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                    Alternate Namesextensions, user content, modifiers
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    196. Evidence.statistic.modelCharacteristic.variable.variableDefinition
                    Definition

                    Description of the variable.

                    ShortDescription of the variable
                    Control1..1
                    TypeReference(Group, EvidenceVariable)
                    Is Modifierfalse
                    Must Supportfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    198. Evidence.statistic.modelCharacteristic.variable.handling
                    Definition

                    How the variable is classified for use in adjusted analysis.

                    Shortcontinuous | dichotomous | ordinal | polychotomous
                    Control0..1
                    BindingThe codes SHALL be taken from EvidenceVariableHandling
                    (required to http://hl7.org/fhir/ValueSet/variable-handling|6.0.0-ballot2)
                    Typecode
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Must Supportfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    200. Evidence.statistic.modelCharacteristic.variable.valueCategory
                    Definition

                    Description for grouping of ordinal or polychotomous variables.

                    ShortDescription for grouping of ordinal or polychotomous variables
                    Control0..*
                    TypeCodeableConcept
                    Is Modifierfalse
                    Must Supportfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    202. Evidence.statistic.modelCharacteristic.variable.valueQuantity
                    Definition

                    Discrete value for grouping of ordinal or polychotomous variables.

                    ShortDiscrete value for grouping of ordinal or polychotomous variables
                    Control0..*
                    TypeQuantity
                    Is Modifierfalse
                    Must Supportfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    204. Evidence.statistic.modelCharacteristic.variable.valueRange
                    Definition

                    Range of values for grouping of ordinal or polychotomous variables.

                    ShortRange of values for grouping of ordinal or polychotomous variables
                    Control0..*
                    TypeRange
                    Is Modifierfalse
                    Must Supportfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    206. Evidence.statistic.modelCharacteristic.attribute
                    Definition

                    An attribute of the statistic used as a model characteristic.

                    ShortAn attribute of the statistic used as a model characteristic
                    Control0..*
                    TypeSeettp://hl7.org/fhir/StructureDefinition/Evidence#Evidence.statistic.attributeEstimate
                    Is Modifierfalse
                    Must Supportfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    208. Evidence.certainty
                    Definition

                    Assessment of certainty, confidence in the estimates, or quality of the evidence.

                    ShortCertainty or quality of the evidence
                    Control0..*
                    TypeBackboneElement
                    Is Modifierfalse
                    Must Supportfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    210. Evidence.certainty.id
                    Definition

                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                    ShortUnique id for inter-element referencing
                    Control0..1
                    This element is affected by the following invariants: ele-1
                    Typestring
                    Is Modifierfalse
                    XML FormatIn the XML format, this property is represented as an attribute.
                    Summaryfalse
                    212. Evidence.certainty.extension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                    ShortAdditional content defined by implementations
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifierfalse
                    Summaryfalse
                    Alternate Namesextensions, user content
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    214. Evidence.certainty.modifierExtension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                    ShortExtensions that cannot be ignored even if unrecognized
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                    Summarytrue
                    Requirements

                    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                    Alternate Namesextensions, user content, modifiers
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    216. Evidence.certainty.description
                    Definition

                    Textual description of certainty.

                    ShortTextual description of certainty
                    Control0..1
                    Typemarkdown
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Must Supportfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    218. Evidence.certainty.note
                    Definition

                    Footnotes and/or explanatory notes.

                    ShortFootnotes and/or explanatory notes
                    Control0..*
                    TypeAnnotation
                    Is Modifierfalse
                    Must Supportfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    220. Evidence.certainty.type
                    Definition

                    Aspect of certainty being rated.

                    ShortAspect of certainty being rated
                    Control0..1
                    BindingUnless not suitable, these codes SHALL be taken from EvidenceCertaintyType
                    (extensible to http://hl7.org/fhir/ValueSet/certainty-type)

                    The aspect of quality, confidence, or certainty.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Must Supportfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    222. Evidence.certainty.rating
                    Definition

                    Assessment or judgement of the aspect.

                    ShortAssessment or judgement of the aspect
                    Control0..1
                    BindingUnless not suitable, these codes SHALL be taken from EvidenceCertaintyRating
                    (extensible to http://hl7.org/fhir/ValueSet/certainty-rating)

                    The assessment of quality, confidence, or certainty.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Must Supportfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    224. Evidence.certainty.rater
                    Definition

                    Individual or group who did the rating.

                    ShortIndividual or group who did the rating
                    Control0..1
                    Typestring
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Must Supportfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    226. Evidence.certainty.subcomponent
                    Definition

                    A domain or subdomain of certainty.

                    ShortA domain or subdomain of certainty
                    Control0..*
                    TypeSeettp://hl7.org/fhir/StructureDefinition/Evidence#Evidence.certainty
                    Is Modifierfalse
                    Must Supportfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))