Evidence Based Medicine on FHIR Implementation Guide
1.0.0-ballot2 - STU 1 ballot International flag

This page is part of the Evidence Based Medicine on FHIR Implementation Guide (v1.0.0-ballot2: STU1 Ballot 2) based on FHIR (HL7® FHIR® Standard) v6.0.0. No current official version has been published yet. For a full list of available versions, see the Directory of published versions

Resource Profile: NetEffectContribution - Detailed Descriptions

Page standards status: Draft Maturity Level: 1

Definitions for the net-effect-contribution resource profile.

Guidance on how to interpret the contents of this table can be found here

0. Evidence
Definition

The Evidence Resource provides a machine-interpretable expression of an evidence concept including the evidence variables (e.g., population, exposures/interventions, comparators, outcomes, measured variables, confounding variables), the statistics, and the certainty of this evidence.

ShortSingle evidence bit
Control0..*
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantscnl-0: Name should be usable as an identifier for the module by machine processing applications such as code generation (name.exists() implies name.matches('^[A-Z]([A-Za-z0-9_]){1,254}$'))
2. Evidence.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. Evidence.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

ShortContained, inline Resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.

Control0..*
This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5
TypeResource
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate Namesinline resources, anonymous resources, contained resources
6. Evidence.extension:citeAs
Slice NameciteAs
Definition

Display of suggested citation for this Resource.

ShortCitation for this Resource
Control0..1
TypeExtension(CiteAs) (Extension Type: markdown)
Is Modifierfalse
Must Supportfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
8. Evidence.extension:relatesTo
Slice NamerelatesTo
Definition

Resource (FHIR or non-FHIR) associated with the Resource.

ShortRelated artifact
Control0..*
TypeExtension(RelatesTo) (Complex Extension)
Is Modifierfalse
Must Supportfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
10. Evidence.extension:RelatesToWithQuotation
Slice NameRelatesToWithQuotation
Definition

Resource (FHIR or non-FHIR) associated with the Resource, plus specification of a portion quoted from the Resource.

ShortRelated artifact with quoted portion
Control0..*
TypeExtension(RelatesToWithQuotation) (Complex Extension)
Is Modifierfalse
Must Supportfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
12. Evidence.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Must Supportfalse
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
14. Evidence.status
Definition

The status of this summary. Enables tracking the life-cycle of the content.

Shortdraft | active | retired | unknown
Comments

Allows filtering of summarys s that are appropriate for use versus not.

See guidance around (not) making local changes to elements here.


Allows filtering of summarys s that are appropriate for use versus not.

See guidance around (not) making local changes to elements here.

Control1..1
BindingThe codes SHALL be taken from PublicationStatushttp://hl7.org/fhir/ValueSet/publication-status|6.0.0-ballot2
(required to http://hl7.org/fhir/ValueSet/publication-status|6.0.0-ballot2)

The lifecycle status of an artifact.

Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because applications should not use a retired {{title}} without due consideration
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
16. Evidence.variableDefinition
Definition

Evidence variable such as population, exposure, or outcome.

ShortEvidence variable such as population, exposure, or outcome
Comments

To report comparative evidence for a research question defined by Population, Intervention, Comparator, and Outcome (PICO), one would use three variableDefinition instances: the Population has variableRole of population, the Intervention and Comparator will be expressed as category values for a GroupAssignment EvidenceVariable with the variableRole of exposure, and the Outcome has variableRole of outcome. In some types of Comparative Evidence, where the groups being compared are not from the same Population (and thus not a PICO-style research question), the GroupAssignment EvidenceVariable may have the variableRole of exposure and express the populations being compared as categories, and a combination of these categories can be described in the variableDefinition with variableRole of population. This approach may be used for example to compare cats and dogs.

Control41..*
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on Evidence.variableDefinition. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ variableRole
  • 18. Evidence.variableDefinition.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    20. Evidence.variableDefinition.variableRole
    Definition

    Classification of the role of the variable.

    Shortpopulation | exposure | outcome | covariate
    Control1..1
    BindingThe codes SHALL be taken from EvidenceVariableRolehttp://hl7.org/fhir/ValueSet/variable-role|6.0.0-ballot2
    (required to http://hl7.org/fhir/ValueSet/variable-role|6.0.0-ballot2)

    The role that the variable plays.

    Typecode
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supportfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    22. Evidence.variableDefinition:population
    Slice Namepopulation
    Definition

    Evidence variable such as population, exposure, or outcome.

    ShortEvidence variable such as population, exposure, or outcome
    Control1..*
    TypeBackboneElement
    Is Modifierfalse
    Must Supportfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    24. Evidence.variableDefinition:population.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    26. Evidence.variableDefinition:population.variableRole
    Definition

    Classification of the role of the variable.

    Shortpopulation | exposure | outcome | covariate
    Control1..1
    BindingThe codes SHALL be taken from EvidenceVariableRolehttp://hl7.org/fhir/ValueSet/variable-role|6.0.0-ballot2
    (required to http://hl7.org/fhir/ValueSet/variable-role|6.0.0-ballot2)

    The role that the variable plays.

    Typecode
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supportfalse
    Summarytrue
    Pattern Valuepopulation
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    28. Evidence.variableDefinition:exposure
    Slice Nameexposure
    Definition

    Evidence variable such as population, exposure, or outcome.

    ShortEvidence variable such as population, exposure, or outcome
    Control1..1*
    TypeBackboneElement
    Is Modifierfalse
    Must Supportfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    30. Evidence.variableDefinition:exposure.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    32. Evidence.variableDefinition:exposure.variableRole
    Definition

    Classification of the role of the variable.

    Shortpopulation | exposure | outcome | covariate
    Control1..1
    BindingThe codes SHALL be taken from EvidenceVariableRolehttp://hl7.org/fhir/ValueSet/variable-role|6.0.0-ballot2
    (required to http://hl7.org/fhir/ValueSet/variable-role|6.0.0-ballot2)

    The role that the variable plays.

    Typecode
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supportfalse
    Summarytrue
    Pattern Valueexposure
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    34. Evidence.variableDefinition:exposure.comparatorCategory
    Definition

    The reference value used for comparison.

    ShortThe reference value used for comparison
    Comments

    Value should match EvidenceVariable.category.name in the EvidenceVariable referenced in the observed or intended element.

    Control10..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supportfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    36. Evidence.variableDefinition:outcome
    Slice Nameoutcome
    Definition

    Evidence variable such as population, exposure, or outcome.

    ShortEvidence variable such as population, exposure, or outcome
    Control1..*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    38. Evidence.variableDefinition:outcome.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    40. Evidence.variableDefinition:outcome.variableRole
    Definition

    Classification of the role of the variable.

    Shortpopulation | exposure | outcome | covariate
    Control1..1
    BindingThe codes SHALL be taken from EvidenceVariableRolehttp://hl7.org/fhir/ValueSet/variable-role|6.0.0-ballot2
    (required to http://hl7.org/fhir/ValueSet/variable-role|6.0.0-ballot2)

    The role that the variable plays.

    Typecode
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supportfalse
    Summarytrue
    Pattern Valueoutcome
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    42. Evidence.variableDefinition:outcome.comparatorCategory
    Definition

    The reference value used for comparison.

    ShortThe reference value used for comparison
    Comments

    Value should match EvidenceVariable.category.name in the EvidenceVariable referenced in the observed or intended element.

    Control0..01
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supportfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    44. Evidence.variableDefinition:covariate
    Slice Namecovariate
    Definition

    Evidence variable such as population, exposure, or outcome.

    ShortEvidence variable such as population, exposure, or outcome
    Comments

    To report comparative evidence for a research question defined by Population, Intervention, Comparator, and Outcome (PICO), one would use three variableDefinition instances: the Population has variableRole of population, the Intervention and Comparator will be expressed as category values for a GroupAssignment EvidenceVariable with the variableRole of exposure, and the Outcome has variableRole of outcome. In some types of Comparative Evidence, where the groups being compared are not from the same Population (and thus not a PICO-style research question), the GroupAssignment EvidenceVariable may have the variableRole of exposure and express the populations being compared as categories, and a combination of these categories can be described in the variableDefinition with variableRole of population. This approach may be used for example to compare cats and dogs.

    Control1..*
    TypeBackboneElement
    Is Modifierfalse
    Must Supportfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    46. Evidence.variableDefinition:covariate.extension
    Definition

    An Extension


    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortExtensionAdditional content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    SlicingThis element introduces a set of slices on Evidence.variableDefinition.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • 48. Evidence.variableDefinition:covariate.extension:relativeOutcomeImportance
      Slice NamerelativeOutcomeImportance
      Definition

      Relative importance multiplier.

      ShortRelative importance multiplier
      Control0..1
      TypeExtension(RelativeOutcomeImportance) (Extension Type: Reference(OutcomeImportance))
      Is Modifierfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      50. Evidence.variableDefinition:covariate.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      52. Evidence.variableDefinition:covariate.variableRole
      Definition

      Classification of the role of the variable.

      Shortpopulation | exposure | outcome | covariate
      Control1..1
      BindingThe codes SHALL be taken from EvidenceVariableRolehttp://hl7.org/fhir/ValueSet/variable-role|6.0.0-ballot2
      (required to http://hl7.org/fhir/ValueSet/variable-role|6.0.0-ballot2)

      The role that the variable plays.

      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supportfalse
      Summarytrue
      Pattern Valuecovariate
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      54. Evidence.variableDefinition:covariate.intended
      Definition

      Definition of the intended variable related to the Evidence.

      ShortDefinition of the intended variable related to the Evidence
      Control0..01
      TypeReference(Group, EvidenceVariable)
      Is Modifierfalse
      Must Supportfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      56. Evidence.statistic
      Definition

      Values and parameters for a single statistic.

      ShortValues and parameters for a single statistic
      Control10..*
      TypeBackboneElement
      Is Modifierfalse
      Must Supportfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      SlicingThis element introduces a set of slices on Evidence.statistic. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ statisticType.coding
      • 58. Evidence.statistic.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        60. Evidence.statistic:netEffect
        Slice NamenetEffect
        Definition

        Values and parameters for a single statistic.

        ShortValues and parameters for a single statistic
        Control10..1*
        TypeBackboneElement
        Is Modifierfalse
        Must Supporttrue
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        62. Evidence.statistic:netEffect.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        64. Evidence.statistic:netEffect.attributeEstimate
        Definition

        A statistical attribute of the statistic such as a measure of heterogeneity.

        ShortAn attribute of the Statistic
        Control10..*
        TypeBackboneElement
        Is Modifierfalse
        Must Supportfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        SlicingThis element introduces a set of slices on Evidence.statistic.attributeEstimate. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ type.coding
        • 66. Evidence.statistic:netEffect.attributeEstimate.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          68. Evidence.statistic:netEffect.attributeEstimate:confidenceInterval
          Slice NameconfidenceInterval
          Definition

          A statistical attribute of the statistic such as a measure of heterogeneity.

          ShortAn attribute of the Statistic
          Control10..1*
          TypeBackboneElement
          Is Modifierfalse
          Must Supporttrue
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          70. Evidence.statistic:netEffect.attributeEstimate:confidenceInterval.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          72. Evidence.statistic:netEffect.modelCharacteristic
          Definition

          A component of the method to generate the statistic.

          ShortAn aspect of the statistical model
          Control10..*
          TypeBackboneElement
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          SlicingThis element introduces a set of slices on Evidence.statistic.modelCharacteristic. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ code.text
          • 74. Evidence.statistic:netEffect.modelCharacteristic.modifierExtension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

            ShortExtensions that cannot be ignored even if unrecognized
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
            Summarytrue
            Requirements

            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

            Alternate Namesextensions, user content, modifiers
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            76. Evidence.statistic:netEffect.modelCharacteristic.code
            Definition

            Description of a component of the method to generate the statistic.

            ShortModel specification
            Control1..1
            BindingUnless not suitable, these codes SHALL be taken from StatisticModelCodehttp://hl7.org/fhir/ValueSet/statistic-model-code
            (extensible to http://hl7.org/fhir/ValueSet/statistic-model-code)
            TypeCodeableConcept
            Is Modifierfalse
            Must Supportfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            78. Evidence.statistic:netEffect.modelCharacteristic:netEffectContributionAnalysis
            Slice NamenetEffectContributionAnalysis
            Definition

            A component of the method to generate the statistic.

            ShortAn aspect of the statistical model
            Control10..1*
            TypeBackboneElement
            Is Modifierfalse
            Must Supporttrue
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            80. Evidence.statistic:netEffect.modelCharacteristic:netEffectContributionAnalysis.modifierExtension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

            ShortExtensions that cannot be ignored even if unrecognized
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
            Summarytrue
            Requirements

            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

            Alternate Namesextensions, user content, modifiers
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            82. Evidence.statistic:netEffect.modelCharacteristic:netEffectContributionAnalysis.code
            Definition

            Description of a component of the method to generate the statistic.

            ShortModel specification
            Control1..1
            BindingUnless not suitable, these codes SHALL be taken from StatisticModelCodehttp://hl7.org/fhir/ValueSet/statistic-model-code
            (extensible to http://hl7.org/fhir/ValueSet/statistic-model-code)
            TypeCodeableConcept
            Is Modifierfalse
            Must Supportfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            84. Evidence.statistic:netEffect.modelCharacteristic:netEffectContributionAnalysis.code.text
            Definition

            A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

            ShortPlain text representation of the concept
            Comments

            Very often the text is the same as a displayName of one of the codings.

            Control10..1
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summaryfalse
            Requirements

            The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

            Pattern ValueNet effect contribution analysis
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

            Guidance on how to interpret the contents of this table can be found here

            0. Evidence
            2. Evidence.variableDefinition
            Control4..?
            4. Evidence.variableDefinition:covariate
            Slice Namecovariate
            Control1..*
            6. Evidence.variableDefinition:covariate.extension
            SlicingThis element introduces a set of slices on Evidence.variableDefinition.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • value @ url
            • 8. Evidence.variableDefinition:covariate.extension:relativeOutcomeImportance
              Slice NamerelativeOutcomeImportance
              Control0..1
              TypeExtension(RelativeOutcomeImportance) (Extension Type: Reference(OutcomeImportance))
              10. Evidence.variableDefinition:covariate.variableRole
              Pattern Valuecovariate
              12. Evidence.variableDefinition:covariate.roleSubtype
              14. Evidence.variableDefinition:covariate.roleSubtype.text
              Pattern ValueRelative Value Multiplier
              16. Evidence.variableDefinition:covariate.observed
              18. Evidence.variableDefinition:covariate.observed.display
              Pattern ValueRelative Importance Multiplier
              20. Evidence.variableDefinition:covariate.intended
              Control0..0
              22. Evidence.statistic
              Control1..?
              SlicingThis element introduces a set of slices on Evidence.statistic. The slices areUnordered and Open, and can be differentiated using the following discriminators:
              • value @ statisticType.coding
              • 24. Evidence.statistic:netEffect
                Slice NamenetEffect
                Control1..1
                Must Supporttrue
                26. Evidence.statistic:netEffect.statisticType
                28. Evidence.statistic:netEffect.statisticType.coding
                Control1..1
                Pattern Value{
                  "system" : "https://fevir.net/sevco",
                  "code" : "STATO:0000424",
                  "display" : "risk difference"
                }
                30. Evidence.statistic:netEffect.attributeEstimate
                Control1..?
                SlicingThis element introduces a set of slices on Evidence.statistic.attributeEstimate. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                • value @ type.coding
                • 32. Evidence.statistic:netEffect.attributeEstimate:confidenceInterval
                  Slice NameconfidenceInterval
                  Control1..1
                  Must Supporttrue
                  34. Evidence.statistic:netEffect.attributeEstimate:confidenceInterval.type
                  36. Evidence.statistic:netEffect.attributeEstimate:confidenceInterval.type.coding
                  Control1..1
                  Pattern Value{
                    "system" : "https://fevir.net/sevco",
                    "code" : "STATO:0000196",
                    "display" : "confidence interval"
                  }
                  38. Evidence.statistic:netEffect.modelCharacteristic
                  Control1..?
                  SlicingThis element introduces a set of slices on Evidence.statistic.modelCharacteristic. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                  • value @ code.text
                  • 40. Evidence.statistic:netEffect.modelCharacteristic:netEffectContributionAnalysis
                    Slice NamenetEffectContributionAnalysis
                    Control1..1
                    Must Supporttrue
                    42. Evidence.statistic:netEffect.modelCharacteristic:netEffectContributionAnalysis.code
                    44. Evidence.statistic:netEffect.modelCharacteristic:netEffectContributionAnalysis.code.text
                    Control1..?
                    Pattern ValueNet effect contribution analysis

                    Guidance on how to interpret the contents of this table can be found here

                    0. Evidence
                    Definition

                    The Evidence Resource provides a machine-interpretable expression of an evidence concept including the evidence variables (e.g., population, exposures/interventions, comparators, outcomes, measured variables, confounding variables), the statistics, and the certainty of this evidence.

                    ShortSingle evidence bit
                    Control0..*
                    Is Modifierfalse
                    Must Supportfalse
                    Summaryfalse
                    Invariantscnl-0: Name should be usable as an identifier for the module by machine processing applications such as code generation (name.exists() implies name.matches('^[A-Z]([A-Za-z0-9_]){1,254}$'))
                    2. Evidence.id
                    Definition

                    The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

                    ShortLogical id of this artifact
                    Comments

                    Within the context of the FHIR RESTful interactions, the resource has an id except for cases like the create and conditional update. Otherwise, the use of the resouce id depends on the given use case.

                    Control0..1
                    Typeid
                    Is Modifierfalse
                    Must Supportfalse
                    Summarytrue
                    4. Evidence.meta
                    Definition

                    The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

                    ShortMetadata about the resource
                    Control0..1
                    TypeMeta
                    Is Modifierfalse
                    Must Supportfalse
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    6. Evidence.implicitRules
                    Definition

                    A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

                    ShortA set of rules under which this content was created
                    Comments

                    Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

                    Control0..1
                    Typeuri
                    Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Must Supportfalse
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    8. Evidence.language
                    Definition

                    The base language in which the resource is written.

                    ShortLanguage of the resource content
                    Comments

                    Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

                    Control0..1
                    BindingThe codes SHALL be taken from AllLanguages
                    (required to http://hl7.org/fhir/ValueSet/all-languages|6.0.0-ballot2)

                    IETF language tag for a human language

                    Typecode
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Must Supportfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    10. Evidence.text
                    Definition

                    A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

                    ShortText summary of the resource, for human interpretation
                    Comments

                    Contained resources do not have a narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

                    Control0..1
                    This element is affected by the following invariants: dom-6
                    TypeNarrative
                    Is Modifierfalse
                    Must Supportfalse
                    Summaryfalse
                    Alternate Namesnarrative, html, xhtml, display
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    12. Evidence.contained
                    Definition

                    These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

                    ShortContained, inline Resources
                    Comments

                    This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.

                    Control0..*
                    This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5
                    TypeResource
                    Is Modifierfalse
                    Must Supportfalse
                    Summaryfalse
                    Alternate Namesinline resources, anonymous resources, contained resources
                    14. Evidence.extension
                    Definition

                    An Extension

                    ShortExtension
                    Control0..*
                    TypeExtension
                    Is Modifierfalse
                    Must Supportfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    SlicingThis element introduces a set of slices on Evidence.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                    • value @ url
                    • 16. Evidence.extension:citeAs
                      Slice NameciteAs
                      Definition

                      Display of suggested citation for this Resource.

                      ShortCitation for this Resource
                      Control0..1
                      TypeExtension(CiteAs) (Extension Type: markdown)
                      Is Modifierfalse
                      Must Supportfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      18. Evidence.extension:relatesTo
                      Slice NamerelatesTo
                      Definition

                      Resource (FHIR or non-FHIR) associated with the Resource.

                      ShortRelated artifact
                      Control0..*
                      TypeExtension(RelatesTo) (Complex Extension)
                      Is Modifierfalse
                      Must Supportfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      20. Evidence.extension:RelatesToWithQuotation
                      Slice NameRelatesToWithQuotation
                      Definition

                      Resource (FHIR or non-FHIR) associated with the Resource, plus specification of a portion quoted from the Resource.

                      ShortRelated artifact with quoted portion
                      Control0..*
                      TypeExtension(RelatesToWithQuotation) (Complex Extension)
                      Is Modifierfalse
                      Must Supportfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      22. Evidence.modifierExtension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                      ShortExtensions that cannot be ignored
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      TypeExtension
                      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
                      Must Supportfalse
                      Summarytrue
                      Requirements

                      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                      Alternate Namesextensions, user content
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      24. Evidence.url
                      Definition

                      An absolute URI that is used to identify this evidence when it is referenced in a specification, model, design or an instance; also called its canonical identifier. This SHOULD be globally unique and SHOULD be a literal address at which an authoritative instance of this summary is (or will be) published. This URL can be the target of a canonical reference. It SHALL remain the same when the summary is stored on different servers.

                      ShortCanonical identifier for this evidence, represented as a globally unique URI
                      Comments

                      In some cases, the resource can no longer be found at the stated url, but the url itself cannot change. Implementations can use the meta.source element to indicate where the current master source of the resource can be found.

                      Control0..1
                      Typeuri
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supportfalse
                      Summarytrue
                      Requirements

                      Allows the evidence to be referenced by a single globally unique identifier.

                      Invariantscnl-1: URL should not contain | or # - these characters make processing canonical references problematic (exists() implies matches('^[^|# ]+$'))
                      ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      26. Evidence.identifier
                      Definition

                      A formal identifier that is used to identify this summary when it is represented in other formats, or referenced in a specification, model, design or an instance.

                      ShortAdditional identifier for the summary
                      Comments

                      Typically, this is used for identifiers that can go in an HL7 V3 II (instance identifier) data type, and can then identify this summary outside of FHIR, where it is not possible to use the logical URI.

                      NoteThis is a business identifier, not a resource identifier (see discussion)
                      Control0..*
                      TypeIdentifier
                      Is Modifierfalse
                      Must Supportfalse
                      Summarytrue
                      Requirements

                      Allows externally provided and/or usable business identifiers to be easily associated with the module.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      28. Evidence.version
                      Definition

                      The identifier that is used to identify this version of the summary when it is referenced in a specification, model, design or instance. This is an arbitrary value managed by the summary author and is not expected to be globally unique. For example, it might be a timestamp (e.g. yyyymmdd) if a managed version is not available. There is also no expectation that versions can be placed in a lexicographical sequence.

                      ShortBusiness version of this summary
                      Comments

                      The determination of when to create a new version of a resource (same url, new version) vs. defining a new artifact is up to the author. Considerations for making this decision are found in Technical and Business Versions.

                      NoteThis is a business version Id, not a resource version Id (see discussion)
                      Control0..1
                      Typestring
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supportfalse
                      Summarytrue
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      30. Evidence.versionAlgorithm[x]
                      Definition

                      Indicates the mechanism used to compare versions to determine which is more current.

                      ShortHow to compare versions
                      Comments

                      If set as a string, this is a FHIRPath expression that has two additional context variables passed in - %version1 and %version2 and will return a negative number if version1 is newer, a positive number if version2 is newer, and a 0 if the version ordering can't successfully be determined.

                      Control0..1
                      BindingUnless not suitable, these codes SHALL be taken from VersionAlgorithm
                      (extensible to http://hl7.org/fhir/ValueSet/version-algorithm)
                      TypeChoice of: string, Coding
                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supportfalse
                      Summarytrue
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      32. Evidence.name
                      Definition

                      A natural language name identifying the evidence. This name should be usable as an identifier for the module by machine processing applications such as code generation.

                      ShortName for this summary (machine friendly)
                      Comments

                      The name is not expected to be globally unique. The name should be a simple alphanumeric type name to ensure that it is machine-processing friendly.

                      Control0..1
                      This element is affected by the following invariants: cnl-0
                      Typestring
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supportfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      34. Evidence.title
                      Definition

                      A short, descriptive, user-friendly title for the summary.

                      ShortName for this summary (human friendly)
                      Control0..1
                      Typestring
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supportfalse
                      Summarytrue
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      36. Evidence.citeAs[x]
                      Definition

                      Citation Resource or display of suggested citation for this evidence.

                      ShortCitation for this evidence
                      Control0..1
                      TypeChoice of: Reference(Citation), markdown
                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supportfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      38. Evidence.status
                      Definition

                      The status of this summary. Enables tracking the life-cycle of the content.

                      Shortdraft | active | retired | unknown
                      Comments

                      Allows filtering of summarys s that are appropriate for use versus not.

                      See guidance around (not) making local changes to elements here.

                      Control1..1
                      BindingThe codes SHALL be taken from PublicationStatus
                      (required to http://hl7.org/fhir/ValueSet/publication-status|6.0.0-ballot2)

                      The lifecycle status of an artifact.

                      Typecode
                      Is Modifiertrue because This is labeled as "Is Modifier" because applications should not use a retired {{title}} without due consideration
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supportfalse
                      Summarytrue
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      40. Evidence.experimental
                      Definition

                      A Boolean value to indicate that this resource is authored for testing purposes (or education/evaluation/marketing) and is not intended to be used for genuine usage.

                      ShortFor testing purposes, not real usage
                      Control0..1
                      Typeboolean
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supportfalse
                      Summaryfalse
                      Meaning if MissingIf absent, this resource is treated as though it is not experimental.
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      42. Evidence.date
                      Definition

                      The date (and optionally time) when the summary was last significantly changed. The date must change when the business version changes and it must change if the status code changes. In addition, it should change when the substantive content of the summary changes.

                      ShortDate last changed
                      Comments

                      The date is often not tracked until the resource is published, but may be present on draft content. Note that this is not the same as the resource last-modified-date, since the resource may be a secondary representation of the summary. Additional specific dates may be added as extensions or be found by consulting Provenances associated with past versions of the resource.

                      See guidance around (not) making local changes to elements here.

                      Control0..1
                      TypedateTime
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supportfalse
                      Summarytrue
                      Alternate NamesRevision Date
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      44. Evidence.approvalDate
                      Definition

                      The date on which the resource content was approved by the publisher. Approval happens once when the content is officially approved for usage.

                      ShortWhen the summary was approved by publisher
                      Comments

                      The 'date' element may be more recent than the approval date because of minor changes or editorial corrections.

                      See guidance around (not) making local changes to elements here.

                      Control0..1
                      Typedate
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supportfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      46. Evidence.lastReviewDate
                      Definition

                      The date on which the resource content was last reviewed. Review happens periodically after approval but does not change the original approval date.

                      ShortWhen the summary was last reviewed by the publisher
                      Comments

                      If specified, this date follows the original approval date.

                      See guidance around (not) making local changes to elements here.

                      Control0..1
                      Typedate
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Gives a sense of how "current" the content is. Resources that have not been reviewed in a long time may have a risk of being less appropriate/relevant.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      48. Evidence.publisher
                      Definition

                      The name of the organization or individual responsible for the release and ongoing maintenance of the evidence.

                      ShortName of the publisher/steward (organization or individual)
                      Comments

                      Usually an organization but may be an individual. The publisher (or steward) of the evidence is the organization or individual primarily responsible for the maintenance and upkeep of the evidence. This is not necessarily the same individual or organization that developed and initially authored the content. The publisher is the primary point of contact for questions or issues with the evidence. This item SHOULD be populated unless the information is available from context.

                      Control0..1
                      Typestring
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supportfalse
                      Summarytrue
                      Requirements

                      Helps establish the "authority/credibility" of the evidence. May also allow for contact.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      50. Evidence.contact
                      Definition

                      Contact details to assist a user in finding and communicating with the publisher.

                      ShortContact details for the publisher
                      Comments

                      Extensions to ContactDetail include: contactReference, contactAddress, and contributionTime (see Clinical Reasoning Module).

                      See guidance around (not) making local changes to elements here.

                      Control0..*
                      TypeContactDetail
                      Is Modifierfalse
                      Must Supportfalse
                      Summarytrue
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      52. Evidence.author
                      Definition

                      An individiual, organization, or device primarily involved in the creation and maintenance of the content.

                      ShortWho authored the content
                      Comments

                      Extensions to ContactDetail include: contactReference, contactAddress, and contributionTime (see Clinical Reasoning Module).

                      Control0..*
                      TypeContactDetail
                      Is Modifierfalse
                      Must Supportfalse
                      Summarytrue
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      54. Evidence.editor
                      Definition

                      An individiual, organization, or device primarily responsible for internal coherence of the content.

                      ShortWho edited the content
                      Comments

                      Extensions to ContactDetail include: contactReference, contactAddress, and contributionTime (see Clinical Reasoning Module).

                      Control0..*
                      TypeContactDetail
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      56. Evidence.reviewer
                      Definition

                      An individiual, organization, or device primarily responsible for review of some aspect of the content.

                      ShortWho reviewed the content
                      Comments

                      Extensions to ContactDetail include: contactReference, contactAddress, and contributionTime (see Clinical Reasoning Module).

                      See guidance around (not) making local changes to elements here.

                      Control0..*
                      TypeContactDetail
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      58. Evidence.endorser
                      Definition

                      An individiual, organization, or device responsible for officially endorsing the content for use in some setting.

                      ShortWho endorsed the content
                      Comments

                      Extensions to ContactDetail include: contactReference, contactAddress, and contributionTime (see Clinical Reasoning Module).

                      See guidance around (not) making local changes to elements here.

                      Control0..*
                      TypeContactDetail
                      Is Modifierfalse
                      Must Supportfalse
                      Summarytrue
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      60. Evidence.useContext
                      Definition

                      The content was developed with a focus and intent of supporting the contexts that are listed. These contexts may be general categories (gender, age, ...) or may be references to specific programs (insurance plans, studies, ...) and may be used to assist with indexing and searching for appropriate evidence instances.

                      ShortThe context that the content is intended to support
                      Comments

                      When multiple useContexts are specified, there is no expectation that all or any of the contexts apply.

                      Control0..*
                      TypeUsageContext
                      Is Modifierfalse
                      Must Supportfalse
                      Summarytrue
                      Requirements

                      Assist in searching for appropriate content.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      62. Evidence.purpose
                      Definition

                      Explanation of why this Evidence is needed and why it has been designed as it has.

                      ShortWhy this Evidence is defined
                      Comments

                      This element does not describe the usage of the Evidence. Instead, it provides traceability of ''why'' the resource is either needed or ''why'' it is defined as it is. This may be used to point to source materials or specifications that drove the structure of this Evidence.

                      Control0..1
                      Typemarkdown
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supportfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      64. Evidence.copyright
                      Definition

                      A copyright statement relating to the Evidence and/or its contents. Copyright statements are generally legal restrictions on the use and publishing of the Evidence.

                      ShortUse and/or publishing restrictions
                      Comments

                      The short copyright declaration (e.g. (c) '2015+ xyz organization' should be sent in the copyrightLabel element.

                      Control0..1
                      Typemarkdown
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Consumers must be able to determine any legal restrictions on the use of the Evidence and/or its content.

                      Alternate NamesLicense, Restrictions
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      66. Evidence.copyrightLabel
                      Definition

                      A short string (<50 characters), suitable for inclusion in a page footer that identifies the copyright holder, effective period, and optionally whether rights are resctricted. (e.g. 'All rights reserved', 'Some rights reserved').

                      ShortCopyright holder and year(s)
                      Comments

                      The (c) symbol should NOT be included in this string. It will be added by software when rendering the notation. Full details about licensing, restrictions, warrantees, etc. goes in the more general 'copyright' element.

                      Control0..1
                      Typestring
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Defines the content expected to be rendered in all representations of the artifact.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      68. Evidence.relatedArtifact
                      Definition

                      Link or citation to artifact associated with the summary.

                      ShortLink or citation to artifact associated with the summary
                      Comments

                      Use type value 'derived-from' to denote the source for the Evidence content. To express exact phrasing in the source material, use a classifier instance with a coding value of 'Quotation' and a text value of the quoted content. The coding value of 'Quotation' can be expressed with a system value of 'http://hl7.org/fhir/provenance-entity-role', a code value of 'quotation' and a display value of 'Quotation'.

                      Control0..*
                      TypeRelatedArtifact
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      70. Evidence.description
                      Definition

                      A free text natural language description of the evidence from a consumer's perspective.

                      ShortDescription of the particular summary
                      Comments

                      This description can be used to capture details such as comments about misuse, instructions for clinical use and interpretation, literature references, examples from the paper world, etc. It is not a rendering of the evidence as conveyed in the 'text' field of the resource itself. This item SHOULD be populated unless the information is available from context (e.g. the language of the evidence is presumed to be the predominant language in the place the evidence was created).

                      Control0..1
                      Typemarkdown
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supportfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      72. Evidence.assertion
                      Definition

                      Declarative description of the Evidence.

                      ShortDeclarative description of the Evidence
                      Control0..1
                      Typemarkdown
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supportfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      74. Evidence.note
                      Definition

                      Footnotes and/or explanatory notes.

                      ShortFootnotes and/or explanatory notes
                      Control0..*
                      TypeAnnotation
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      76. Evidence.variableDefinition
                      Definition

                      Evidence variable such as population, exposure, or outcome.

                      ShortEvidence variable such as population, exposure, or outcome
                      Comments

                      To report comparative evidence for a research question defined by Population, Intervention, Comparator, and Outcome (PICO), one would use three variableDefinition instances: the Population has variableRole of population, the Intervention and Comparator will be expressed as category values for a GroupAssignment EvidenceVariable with the variableRole of exposure, and the Outcome has variableRole of outcome. In some types of Comparative Evidence, where the groups being compared are not from the same Population (and thus not a PICO-style research question), the GroupAssignment EvidenceVariable may have the variableRole of exposure and express the populations being compared as categories, and a combination of these categories can be described in the variableDefinition with variableRole of population. This approach may be used for example to compare cats and dogs.

                      Control4..*
                      TypeBackboneElement
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      SlicingThis element introduces a set of slices on Evidence.variableDefinition. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                      • value @ variableRole
                      • 78. Evidence.variableDefinition.id
                        Definition

                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                        ShortUnique id for inter-element referencing
                        Control0..1
                        This element is affected by the following invariants: ele-1
                        Typestring
                        Is Modifierfalse
                        XML FormatIn the XML format, this property is represented as an attribute.
                        Summaryfalse
                        80. Evidence.variableDefinition.extension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                        ShortAdditional content defined by implementations
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        TypeExtension
                        Is Modifierfalse
                        Summaryfalse
                        Alternate Namesextensions, user content
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        82. Evidence.variableDefinition.modifierExtension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                        ShortExtensions that cannot be ignored even if unrecognized
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        TypeExtension
                        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                        Summarytrue
                        Requirements

                        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                        Alternate Namesextensions, user content, modifiers
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        84. Evidence.variableDefinition.description
                        Definition

                        A text description or summary of the variable.

                        ShortA text description or summary of the variable
                        Control0..1
                        Typemarkdown
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Must Supportfalse
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        86. Evidence.variableDefinition.note
                        Definition

                        Footnotes and/or explanatory notes.

                        ShortFootnotes and/or explanatory notes
                        Control0..*
                        TypeAnnotation
                        Is Modifierfalse
                        Must Supportfalse
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        88. Evidence.variableDefinition.variableRole
                        Definition

                        Classification of the role of the variable.

                        Shortpopulation | exposure | outcome | covariate
                        Control1..1
                        BindingThe codes SHALL be taken from EvidenceVariableRole
                        (required to http://hl7.org/fhir/ValueSet/variable-role|6.0.0-ballot2)

                        The role that the variable plays.

                        Typecode
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Must Supportfalse
                        Summarytrue
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        90. Evidence.variableDefinition.roleSubtype
                        Definition

                        Sub-classification of the role of the variable.

                        Shortsubgroup | variable-A | variable-B | variable-AB | confounder | collider | mediator | effect-modifier
                        Control0..1
                        BindingUnless not suitable, these codes SHALL be taken from EvidenceVariableRoleSubtype
                        (extensible to http://hl7.org/fhir/ValueSet/variable-role-subtype)

                        The sub-role that the variable plays.

                        TypeCodeableConcept
                        Is Modifierfalse
                        Must Supportfalse
                        Summarytrue
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        92. Evidence.variableDefinition.comparatorCategory
                        Definition

                        The reference value used for comparison.

                        ShortThe reference value used for comparison
                        Comments

                        Value should match EvidenceVariable.category.name in the EvidenceVariable referenced in the observed or intended element.

                        Control0..1
                        Typestring
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Must Supportfalse
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        94. Evidence.variableDefinition.observed
                        Definition

                        Definition of the actual variable related to the statistic(s).

                        ShortDefinition of the actual variable related to the statistic(s)
                        Control0..1
                        TypeReference(Group, EvidenceVariable)
                        Is Modifierfalse
                        Must Supportfalse
                        Summarytrue
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        96. Evidence.variableDefinition.intended
                        Definition

                        Definition of the intended variable related to the Evidence.

                        ShortDefinition of the intended variable related to the Evidence
                        Control0..1
                        TypeReference(Group, EvidenceVariable)
                        Is Modifierfalse
                        Must Supportfalse
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        98. Evidence.variableDefinition.directnessMatch
                        Definition

                        Indication of quality of match between intended variable to actual variable.

                        Shortlow | moderate | high | exact
                        Control0..1
                        BindingUnless not suitable, these codes SHALL be taken from EvidenceDirectness
                        (extensible to http://terminology.hl7.org/ValueSet/directness)

                        The quality of how direct the match is.

                        TypeCodeableConcept
                        Is Modifierfalse
                        Must Supportfalse
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        100. Evidence.variableDefinition:population
                        Slice Namepopulation
                        Definition

                        Evidence variable such as population, exposure, or outcome.

                        ShortEvidence variable such as population, exposure, or outcome
                        Control1..*
                        TypeBackboneElement
                        Is Modifierfalse
                        Must Supportfalse
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        102. Evidence.variableDefinition:population.id
                        Definition

                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                        ShortUnique id for inter-element referencing
                        Control0..1
                        This element is affected by the following invariants: ele-1
                        Typestring
                        Is Modifierfalse
                        XML FormatIn the XML format, this property is represented as an attribute.
                        Summaryfalse
                        104. Evidence.variableDefinition:population.extension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                        ShortAdditional content defined by implementations
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        TypeExtension
                        Is Modifierfalse
                        Summaryfalse
                        Alternate Namesextensions, user content
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        106. Evidence.variableDefinition:population.modifierExtension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                        ShortExtensions that cannot be ignored even if unrecognized
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        TypeExtension
                        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                        Summarytrue
                        Requirements

                        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                        Alternate Namesextensions, user content, modifiers
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        108. Evidence.variableDefinition:population.description
                        Definition

                        A text description or summary of the variable.

                        ShortA text description or summary of the variable
                        Control0..1
                        Typemarkdown
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Must Supportfalse
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        110. Evidence.variableDefinition:population.note
                        Definition

                        Footnotes and/or explanatory notes.

                        ShortFootnotes and/or explanatory notes
                        Control0..*
                        TypeAnnotation
                        Is Modifierfalse
                        Must Supportfalse
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        112. Evidence.variableDefinition:population.variableRole
                        Definition

                        Classification of the role of the variable.

                        Shortpopulation | exposure | outcome | covariate
                        Control1..1
                        BindingThe codes SHALL be taken from EvidenceVariableRole
                        (required to http://hl7.org/fhir/ValueSet/variable-role|6.0.0-ballot2)

                        The role that the variable plays.

                        Typecode
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Must Supportfalse
                        Summarytrue
                        Pattern Valuepopulation
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        114. Evidence.variableDefinition:population.roleSubtype
                        Definition

                        Sub-classification of the role of the variable.

                        Shortsubgroup | variable-A | variable-B | variable-AB | confounder | collider | mediator | effect-modifier
                        Control0..1
                        BindingUnless not suitable, these codes SHALL be taken from EvidenceVariableRoleSubtype
                        (extensible to http://hl7.org/fhir/ValueSet/variable-role-subtype)

                        The sub-role that the variable plays.

                        TypeCodeableConcept
                        Is Modifierfalse
                        Must Supportfalse
                        Summarytrue
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        116. Evidence.variableDefinition:population.comparatorCategory
                        Definition

                        The reference value used for comparison.

                        ShortThe reference value used for comparison
                        Comments

                        Value should match EvidenceVariable.category.name in the EvidenceVariable referenced in the observed or intended element.

                        Control0..1
                        Typestring
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Must Supportfalse
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        118. Evidence.variableDefinition:population.observed
                        Definition

                        Definition of the actual variable related to the statistic(s).

                        ShortDefinition of the actual variable related to the statistic(s)
                        Control0..1
                        TypeReference(StudyGroup, ExposureGroup, ComparatorGroup, MetaanalysisStudyGroup)
                        Is Modifierfalse
                        Must Supportfalse
                        Summarytrue
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        120. Evidence.variableDefinition:population.intended
                        Definition

                        Definition of the intended variable related to the Evidence.

                        ShortDefinition of the intended variable related to the Evidence
                        Control0..1
                        TypeReference(Group)
                        Is Modifierfalse
                        Must Supportfalse
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        122. Evidence.variableDefinition:population.directnessMatch
                        Definition

                        Indication of quality of match between intended variable to actual variable.

                        Shortlow | moderate | high | exact
                        Control0..1
                        BindingUnless not suitable, these codes SHALL be taken from EvidenceDirectness
                        (extensible to http://terminology.hl7.org/ValueSet/directness)

                        The quality of how direct the match is.

                        TypeCodeableConcept
                        Is Modifierfalse
                        Must Supportfalse
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        124. Evidence.variableDefinition:exposure
                        Slice Nameexposure
                        Definition

                        Evidence variable such as population, exposure, or outcome.

                        ShortEvidence variable such as population, exposure, or outcome
                        Control1..1
                        TypeBackboneElement
                        Is Modifierfalse
                        Must Supportfalse
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        126. Evidence.variableDefinition:exposure.id
                        Definition

                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                        ShortUnique id for inter-element referencing
                        Control0..1
                        This element is affected by the following invariants: ele-1
                        Typestring
                        Is Modifierfalse
                        XML FormatIn the XML format, this property is represented as an attribute.
                        Summaryfalse
                        128. Evidence.variableDefinition:exposure.extension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                        ShortAdditional content defined by implementations
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        TypeExtension
                        Is Modifierfalse
                        Summaryfalse
                        Alternate Namesextensions, user content
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        130. Evidence.variableDefinition:exposure.modifierExtension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                        ShortExtensions that cannot be ignored even if unrecognized
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        TypeExtension
                        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                        Summarytrue
                        Requirements

                        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                        Alternate Namesextensions, user content, modifiers
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        132. Evidence.variableDefinition:exposure.description
                        Definition

                        A text description or summary of the variable.

                        ShortA text description or summary of the variable
                        Control0..1
                        Typemarkdown
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Must Supportfalse
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        134. Evidence.variableDefinition:exposure.note
                        Definition

                        Footnotes and/or explanatory notes.

                        ShortFootnotes and/or explanatory notes
                        Control0..*
                        TypeAnnotation
                        Is Modifierfalse
                        Must Supportfalse
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        136. Evidence.variableDefinition:exposure.variableRole
                        Definition

                        Classification of the role of the variable.

                        Shortpopulation | exposure | outcome | covariate
                        Control1..1
                        BindingThe codes SHALL be taken from EvidenceVariableRole
                        (required to http://hl7.org/fhir/ValueSet/variable-role|6.0.0-ballot2)

                        The role that the variable plays.

                        Typecode
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Must Supportfalse
                        Summarytrue
                        Pattern Valueexposure
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        138. Evidence.variableDefinition:exposure.roleSubtype
                        Definition

                        Sub-classification of the role of the variable.

                        Shortsubgroup | variable-A | variable-B | variable-AB | confounder | collider | mediator | effect-modifier
                        Control0..1
                        BindingUnless not suitable, these codes SHALL be taken from EvidenceVariableRoleSubtype
                        (extensible to http://hl7.org/fhir/ValueSet/variable-role-subtype)

                        The sub-role that the variable plays.

                        TypeCodeableConcept
                        Is Modifierfalse
                        Must Supportfalse
                        Summarytrue
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        140. Evidence.variableDefinition:exposure.comparatorCategory
                        Definition

                        The reference value used for comparison.

                        ShortThe reference value used for comparison
                        Comments

                        Value should match EvidenceVariable.category.name in the EvidenceVariable referenced in the observed or intended element.

                        Control1..1
                        Typestring
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Must Supportfalse
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        142. Evidence.variableDefinition:exposure.observed
                        Definition

                        Definition of the actual variable related to the statistic(s).

                        ShortDefinition of the actual variable related to the statistic(s)
                        Control0..1
                        TypeReference(GroupAssignment)
                        Is Modifierfalse
                        Must Supportfalse
                        Summarytrue
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        144. Evidence.variableDefinition:exposure.intended
                        Definition

                        Definition of the intended variable related to the Evidence.

                        ShortDefinition of the intended variable related to the Evidence
                        Control0..1
                        TypeReference(VariableDefinition)
                        Is Modifierfalse
                        Must Supportfalse
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        146. Evidence.variableDefinition:exposure.directnessMatch
                        Definition

                        Indication of quality of match between intended variable to actual variable.

                        Shortlow | moderate | high | exact
                        Control0..1
                        BindingUnless not suitable, these codes SHALL be taken from EvidenceDirectness
                        (extensible to http://terminology.hl7.org/ValueSet/directness)

                        The quality of how direct the match is.

                        TypeCodeableConcept
                        Is Modifierfalse
                        Must Supportfalse
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        148. Evidence.variableDefinition:outcome
                        Slice Nameoutcome
                        Definition

                        Evidence variable such as population, exposure, or outcome.

                        ShortEvidence variable such as population, exposure, or outcome
                        Control1..*
                        TypeBackboneElement
                        Is Modifierfalse
                        Must Supporttrue
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        150. Evidence.variableDefinition:outcome.id
                        Definition

                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                        ShortUnique id for inter-element referencing
                        Control0..1
                        This element is affected by the following invariants: ele-1
                        Typestring
                        Is Modifierfalse
                        XML FormatIn the XML format, this property is represented as an attribute.
                        Summaryfalse
                        152. Evidence.variableDefinition:outcome.extension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                        ShortAdditional content defined by implementations
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        TypeExtension
                        Is Modifierfalse
                        Summaryfalse
                        Alternate Namesextensions, user content
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        154. Evidence.variableDefinition:outcome.modifierExtension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                        ShortExtensions that cannot be ignored even if unrecognized
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        TypeExtension
                        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                        Summarytrue
                        Requirements

                        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                        Alternate Namesextensions, user content, modifiers
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        156. Evidence.variableDefinition:outcome.description
                        Definition

                        A text description or summary of the variable.

                        ShortA text description or summary of the variable
                        Control0..1
                        Typemarkdown
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Must Supportfalse
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        158. Evidence.variableDefinition:outcome.note
                        Definition

                        Footnotes and/or explanatory notes.

                        ShortFootnotes and/or explanatory notes
                        Control0..*
                        TypeAnnotation
                        Is Modifierfalse
                        Must Supportfalse
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        160. Evidence.variableDefinition:outcome.variableRole
                        Definition

                        Classification of the role of the variable.

                        Shortpopulation | exposure | outcome | covariate
                        Control1..1
                        BindingThe codes SHALL be taken from EvidenceVariableRole
                        (required to http://hl7.org/fhir/ValueSet/variable-role|6.0.0-ballot2)

                        The role that the variable plays.

                        Typecode
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Must Supportfalse
                        Summarytrue
                        Pattern Valueoutcome
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        162. Evidence.variableDefinition:outcome.roleSubtype
                        Definition

                        Sub-classification of the role of the variable.

                        Shortsubgroup | variable-A | variable-B | variable-AB | confounder | collider | mediator | effect-modifier
                        Control0..1
                        BindingUnless not suitable, these codes SHALL be taken from EvidenceVariableRoleSubtype
                        (extensible to http://hl7.org/fhir/ValueSet/variable-role-subtype)

                        The sub-role that the variable plays.

                        TypeCodeableConcept
                        Is Modifierfalse
                        Must Supportfalse
                        Summarytrue
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        164. Evidence.variableDefinition:outcome.comparatorCategory
                        Definition

                        The reference value used for comparison.

                        ShortThe reference value used for comparison
                        Comments

                        Value should match EvidenceVariable.category.name in the EvidenceVariable referenced in the observed or intended element.

                        Control0..0
                        Typestring
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Must Supportfalse
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        166. Evidence.variableDefinition:outcome.observed
                        Definition

                        Definition of the actual variable related to the statistic(s).

                        ShortDefinition of the actual variable related to the statistic(s)
                        Control0..1
                        TypeReference(VariableDefinition)
                        Is Modifierfalse
                        Must Supportfalse
                        Summarytrue
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        168. Evidence.variableDefinition:outcome.intended
                        Definition

                        Definition of the intended variable related to the Evidence.

                        ShortDefinition of the intended variable related to the Evidence
                        Control0..1
                        TypeReference(EvidenceVariable)
                        Is Modifierfalse
                        Must Supportfalse
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        170. Evidence.variableDefinition:outcome.directnessMatch
                        Definition

                        Indication of quality of match between intended variable to actual variable.

                        Shortlow | moderate | high | exact
                        Control0..1
                        BindingUnless not suitable, these codes SHALL be taken from EvidenceDirectness
                        (extensible to http://terminology.hl7.org/ValueSet/directness)

                        The quality of how direct the match is.

                        TypeCodeableConcept
                        Is Modifierfalse
                        Must Supportfalse
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        172. Evidence.variableDefinition:covariate
                        Slice Namecovariate
                        Definition

                        Evidence variable such as population, exposure, or outcome.

                        ShortEvidence variable such as population, exposure, or outcome
                        Comments

                        To report comparative evidence for a research question defined by Population, Intervention, Comparator, and Outcome (PICO), one would use three variableDefinition instances: the Population has variableRole of population, the Intervention and Comparator will be expressed as category values for a GroupAssignment EvidenceVariable with the variableRole of exposure, and the Outcome has variableRole of outcome. In some types of Comparative Evidence, where the groups being compared are not from the same Population (and thus not a PICO-style research question), the GroupAssignment EvidenceVariable may have the variableRole of exposure and express the populations being compared as categories, and a combination of these categories can be described in the variableDefinition with variableRole of population. This approach may be used for example to compare cats and dogs.

                        Control1..*
                        TypeBackboneElement
                        Is Modifierfalse
                        Must Supportfalse
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        174. Evidence.variableDefinition:covariate.id
                        Definition

                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                        ShortUnique id for inter-element referencing
                        Control0..1
                        This element is affected by the following invariants: ele-1
                        Typestring
                        Is Modifierfalse
                        XML FormatIn the XML format, this property is represented as an attribute.
                        Summaryfalse
                        176. Evidence.variableDefinition:covariate.extension
                        Definition

                        An Extension

                        ShortExtension
                        Control0..*
                        TypeExtension
                        Is Modifierfalse
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        SlicingThis element introduces a set of slices on Evidence.variableDefinition.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                        • value @ url
                        • 178. Evidence.variableDefinition:covariate.extension:relativeOutcomeImportance
                          Slice NamerelativeOutcomeImportance
                          Definition

                          Relative importance multiplier.

                          ShortRelative importance multiplier
                          Control0..1
                          TypeExtension(RelativeOutcomeImportance) (Extension Type: Reference(OutcomeImportance))
                          Is Modifierfalse
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                          180. Evidence.variableDefinition:covariate.modifierExtension
                          Definition

                          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                          ShortExtensions that cannot be ignored even if unrecognized
                          Comments

                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                          Control0..*
                          TypeExtension
                          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                          Summarytrue
                          Requirements

                          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                          Alternate Namesextensions, user content, modifiers
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          182. Evidence.variableDefinition:covariate.description
                          Definition

                          A text description or summary of the variable.

                          ShortA text description or summary of the variable
                          Control0..1
                          Typemarkdown
                          Is Modifierfalse
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Must Supportfalse
                          Summaryfalse
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          184. Evidence.variableDefinition:covariate.note
                          Definition

                          Footnotes and/or explanatory notes.

                          ShortFootnotes and/or explanatory notes
                          Control0..*
                          TypeAnnotation
                          Is Modifierfalse
                          Must Supportfalse
                          Summaryfalse
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          186. Evidence.variableDefinition:covariate.variableRole
                          Definition

                          Classification of the role of the variable.

                          Shortpopulation | exposure | outcome | covariate
                          Control1..1
                          BindingThe codes SHALL be taken from EvidenceVariableRole
                          (required to http://hl7.org/fhir/ValueSet/variable-role|6.0.0-ballot2)

                          The role that the variable plays.

                          Typecode
                          Is Modifierfalse
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Must Supportfalse
                          Summarytrue
                          Pattern Valuecovariate
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          188. Evidence.variableDefinition:covariate.roleSubtype
                          Definition

                          Sub-classification of the role of the variable.

                          Shortsubgroup | variable-A | variable-B | variable-AB | confounder | collider | mediator | effect-modifier
                          Control0..1
                          BindingUnless not suitable, these codes SHALL be taken from EvidenceVariableRoleSubtype
                          (extensible to http://hl7.org/fhir/ValueSet/variable-role-subtype)

                          The sub-role that the variable plays.

                          TypeCodeableConcept
                          Is Modifierfalse
                          Must Supportfalse
                          Summarytrue
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          190. Evidence.variableDefinition:covariate.roleSubtype.id
                          Definition

                          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                          ShortUnique id for inter-element referencing
                          Control0..1
                          This element is affected by the following invariants: ele-1
                          Typeid
                          Is Modifierfalse
                          XML FormatIn the XML format, this property is represented as an attribute.
                          Summaryfalse
                          192. Evidence.variableDefinition:covariate.roleSubtype.extension
                          Definition

                          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                          ShortAdditional content defined by implementations
                          Comments

                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                          Control0..*
                          TypeExtension
                          Is Modifierfalse
                          Summaryfalse
                          Alternate Namesextensions, user content
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          SlicingThis element introduces a set of slices on Evidence.variableDefinition.roleSubtype.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                          • value @ url
                          • 194. Evidence.variableDefinition:covariate.roleSubtype.coding
                            Definition

                            A reference to a code defined by a terminology system.

                            ShortCode defined by a terminology system
                            Comments

                            Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

                            Control0..*
                            TypeCoding
                            Is Modifierfalse
                            Summaryfalse
                            Requirements

                            Allows for alternative encodings within a code system, and translations to other code systems.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            196. Evidence.variableDefinition:covariate.roleSubtype.text
                            Definition

                            A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

                            ShortPlain text representation of the concept
                            Comments

                            Very often the text is the same as a displayName of one of the codings.

                            Control0..1
                            Typestring
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Summaryfalse
                            Requirements

                            The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

                            Pattern ValueRelative Value Multiplier
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            198. Evidence.variableDefinition:covariate.comparatorCategory
                            Definition

                            The reference value used for comparison.

                            ShortThe reference value used for comparison
                            Comments

                            Value should match EvidenceVariable.category.name in the EvidenceVariable referenced in the observed or intended element.

                            Control0..1
                            Typestring
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Must Supportfalse
                            Summaryfalse
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            200. Evidence.variableDefinition:covariate.observed
                            Definition

                            Definition of the actual variable related to the statistic(s).

                            ShortDefinition of the actual variable related to the statistic(s)
                            Control0..1
                            TypeReference(Group, EvidenceVariable)
                            Is Modifierfalse
                            Must Supportfalse
                            Summarytrue
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            202. Evidence.variableDefinition:covariate.observed.id
                            Definition

                            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                            ShortUnique id for inter-element referencing
                            Control0..1
                            This element is affected by the following invariants: ele-1
                            Typeid
                            Is Modifierfalse
                            XML FormatIn the XML format, this property is represented as an attribute.
                            Summaryfalse
                            204. Evidence.variableDefinition:covariate.observed.extension
                            Definition

                            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                            ShortAdditional content defined by implementations
                            Comments

                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                            Control0..*
                            TypeExtension
                            Is Modifierfalse
                            Summaryfalse
                            Alternate Namesextensions, user content
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            SlicingThis element introduces a set of slices on Evidence.variableDefinition.observed.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                            • value @ url
                            • 206. Evidence.variableDefinition:covariate.observed.reference
                              Definition

                              A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

                              ShortLiteral reference, Relative, internal or absolute URL
                              Comments

                              Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

                              Control0..1
                              This element is affected by the following invariants: ref-2, ref-1
                              Typestring
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summaryfalse
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              208. Evidence.variableDefinition:covariate.observed.type
                              Definition

                              The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

                              The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

                              ShortType the reference refers to (e.g. "Patient") - must be a resource in resources
                              Comments

                              This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a known RESTful URL) or by resolving the target of the reference.

                              Control0..1
                              BindingUnless not suitable, these codes SHALL be taken from ResourceType
                              (extensible to http://hl7.org/fhir/ValueSet/resource-types)

                              Aa resource (or, for logical models, the URI of the logical model).

                              Typeuri
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summaryfalse
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              210. Evidence.variableDefinition:covariate.observed.identifier
                              Definition

                              An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

                              ShortLogical reference, when literal reference is not known
                              Comments

                              When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

                              When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

                              Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

                              Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

                              This element only allows for a single identifier. In the case where additional identifiers are required, use the http://hl7.org/fhir/StructureDefinition/additionalIdentifier extension.

                              NoteThis is a business identifier, not a resource identifier (see discussion)
                              Control0..1
                              This element is affected by the following invariants: ref-2
                              TypeIdentifier
                              Is Modifierfalse
                              Summaryfalse
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              212. Evidence.variableDefinition:covariate.observed.display
                              Definition

                              Plain text narrative that identifies the resource in addition to the resource reference.

                              ShortText alternative for the resource
                              Comments

                              This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

                              Control0..1
                              This element is affected by the following invariants: ref-2
                              Typestring
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summaryfalse
                              Pattern ValueRelative Importance Multiplier
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              214. Evidence.variableDefinition:covariate.intended
                              Definition

                              Definition of the intended variable related to the Evidence.

                              ShortDefinition of the intended variable related to the Evidence
                              Control0..0
                              TypeReference(Group, EvidenceVariable)
                              Is Modifierfalse
                              Must Supportfalse
                              Summaryfalse
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              216. Evidence.variableDefinition:covariate.directnessMatch
                              Definition

                              Indication of quality of match between intended variable to actual variable.

                              Shortlow | moderate | high | exact
                              Control0..1
                              BindingUnless not suitable, these codes SHALL be taken from EvidenceDirectness
                              (extensible to http://terminology.hl7.org/ValueSet/directness)

                              The quality of how direct the match is.

                              TypeCodeableConcept
                              Is Modifierfalse
                              Must Supportfalse
                              Summaryfalse
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              218. Evidence.synthesisType
                              Definition

                              The method to combine studies.

                              ShortThe method to combine studies
                              Control0..1
                              BindingUnless not suitable, these codes SHALL be taken from StatisticSynthesisType
                              (extensible to http://terminology.hl7.org/ValueSet/synthesis-type)

                              Types of combining results from a body of evidence (e.g. summary data meta-analysis).

                              TypeCodeableConcept
                              Is Modifierfalse
                              Must Supportfalse
                              Summaryfalse
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              220. Evidence.studyDesign
                              Definition

                              The design of the study that produced this evidence. The design is described with any number of study design characteristics.

                              ShortThe design of the study that produced this evidence
                              Control0..*
                              BindingUnless not suitable, these codes SHALL be taken from StudyDesign
                              (extensible to http://hl7.org/fhir/ValueSet/study-design)

                              This is a set of terms for study design characteristics.

                              TypeCodeableConcept
                              Is Modifierfalse
                              Must Supportfalse
                              Summaryfalse
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              222. Evidence.statistic
                              Definition

                              Values and parameters for a single statistic.

                              ShortValues and parameters for a single statistic
                              Control1..*
                              TypeBackboneElement
                              Is Modifierfalse
                              Must Supportfalse
                              Summaryfalse
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              SlicingThis element introduces a set of slices on Evidence.statistic. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                              • value @ statisticType.coding
                              • 224. Evidence.statistic.id
                                Definition

                                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                ShortUnique id for inter-element referencing
                                Control0..1
                                This element is affected by the following invariants: ele-1
                                Typestring
                                Is Modifierfalse
                                XML FormatIn the XML format, this property is represented as an attribute.
                                Summaryfalse
                                226. Evidence.statistic.extension
                                Definition

                                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                ShortAdditional content defined by implementations
                                Comments

                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                Control0..*
                                TypeExtension
                                Is Modifierfalse
                                Summaryfalse
                                Alternate Namesextensions, user content
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                228. Evidence.statistic.modifierExtension
                                Definition

                                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                ShortExtensions that cannot be ignored even if unrecognized
                                Comments

                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                Control0..*
                                TypeExtension
                                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                Summarytrue
                                Requirements

                                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                Alternate Namesextensions, user content, modifiers
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                230. Evidence.statistic.description
                                Definition

                                A description of the content value of the statistic.

                                ShortDescription of content
                                Control0..1
                                Typemarkdown
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Must Supportfalse
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                232. Evidence.statistic.note
                                Definition

                                Footnotes and/or explanatory notes.

                                ShortFootnotes and/or explanatory notes
                                Control0..*
                                TypeAnnotation
                                Is Modifierfalse
                                Must Supportfalse
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                234. Evidence.statistic.statisticType
                                Definition

                                Type of statistic, e.g., relative risk.

                                ShortType of statistic, e.g., relative risk
                                Control0..1
                                BindingUnless not suitable, these codes SHALL be taken from StatisticType
                                (extensible to http://hl7.org/fhir/ValueSet/statistic-type)
                                TypeCodeableConcept
                                Is Modifierfalse
                                Must Supportfalse
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                236. Evidence.statistic.category
                                Definition

                                When the measured variable is handled categorically, the category element is used to define which category the statistic is reporting.

                                ShortAssociated category for categorical variable
                                Comments

                                Simple strings can be used for descriptive purposes. Exact matching to EvidenceVariable.category.name for the Evidence.variableDefinition[variableRole=measuredVariable].observed=Reference(EvidenceVariable) could facilitate validation within datasets.

                                Control0..1
                                TypeCodeableConcept
                                Is Modifierfalse
                                Must Supportfalse
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                238. Evidence.statistic.quantity
                                Definition

                                Statistic value.

                                ShortStatistic value
                                Control0..1
                                TypeQuantity
                                Is Modifierfalse
                                Must Supportfalse
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                240. Evidence.statistic.numberOfEvents
                                Definition

                                The number of events associated with the statistic, where the unit of analysis is different from numberAffected, sampleSize.knownDataCount and sampleSize.numberOfParticipants.

                                ShortThe number of events associated with the statistic
                                Comments

                                When the number of events is the statistic, use Evidence.statistic.quantity and set Evidence.statistic.type.coding.code=C25463 and Evidence.statistic.type.coding.display=Count. When the statistic is an Event Rate (where individual participants may have 2 or more events), use Evidence.statistic.numberOfEvents to record the total number of events rather than the number of participants with events.

                                Control0..1
                                TypeunsignedInt
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Must Supportfalse
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                242. Evidence.statistic.numberAffected
                                Definition

                                The number of participants affected where the unit of analysis is the same as sampleSize.knownDataCount and sampleSize.numberOfParticipants.

                                ShortThe number of participants affected
                                Comments

                                When the number affected is the statistic, use Evidence.statistic.quantity and set Evidence.statistic.type.coding.code=C25463 and Evidence.statistic.type.coding.display=Count. When the statistic is a Proportion, use Evidence.statistic.numberAffected and enter an integer as the value. When the statistic is an Event Rate (where individual participants may have 2 or more events), use Evidence.statistic.numberAffected to record the number of participants with events rather than the total number of events.

                                Control0..1
                                TypeunsignedInt
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Must Supportfalse
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                244. Evidence.statistic.sampleSize
                                Definition

                                Number of samples in the statistic.

                                ShortNumber of samples in the statistic
                                Control0..1
                                TypeBackboneElement
                                Is Modifierfalse
                                Must Supportfalse
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                246. Evidence.statistic.sampleSize.id
                                Definition

                                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                ShortUnique id for inter-element referencing
                                Control0..1
                                This element is affected by the following invariants: ele-1
                                Typestring
                                Is Modifierfalse
                                XML FormatIn the XML format, this property is represented as an attribute.
                                Summaryfalse
                                248. Evidence.statistic.sampleSize.extension
                                Definition

                                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                ShortAdditional content defined by implementations
                                Comments

                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                Control0..*
                                TypeExtension
                                Is Modifierfalse
                                Summaryfalse
                                Alternate Namesextensions, user content
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                250. Evidence.statistic.sampleSize.modifierExtension
                                Definition

                                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                ShortExtensions that cannot be ignored even if unrecognized
                                Comments

                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                Control0..*
                                TypeExtension
                                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                Summarytrue
                                Requirements

                                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                Alternate Namesextensions, user content, modifiers
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                252. Evidence.statistic.sampleSize.description
                                Definition

                                Human-readable summary of population sample size.

                                ShortTextual description of sample size for statistic
                                Control0..1
                                Typemarkdown
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Must Supportfalse
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                254. Evidence.statistic.sampleSize.note
                                Definition

                                Footnote or explanatory note about the sample size.

                                ShortFootnote or explanatory note about the sample size
                                Control0..*
                                TypeAnnotation
                                Is Modifierfalse
                                Must Supportfalse
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                256. Evidence.statistic.sampleSize.numberOfStudies
                                Definition

                                Number of participants in the population.

                                ShortNumber of contributing studies
                                Control0..1
                                TypeunsignedInt
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Must Supportfalse
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                258. Evidence.statistic.sampleSize.numberOfParticipants
                                Definition

                                A human-readable string to clarify or explain concepts about the sample size.

                                ShortCumulative number of participants
                                Control0..1
                                TypeunsignedInt
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Must Supportfalse
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                260. Evidence.statistic.sampleSize.knownDataCount
                                Definition

                                Number of participants with known results for measured variables.

                                ShortNumber of participants with known results for measured variables
                                Control0..1
                                TypeunsignedInt
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Must Supportfalse
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                262. Evidence.statistic.attributeEstimate
                                Definition

                                A statistical attribute of the statistic such as a measure of heterogeneity.

                                ShortAn attribute of the Statistic
                                Control0..*
                                TypeBackboneElement
                                Is Modifierfalse
                                Must Supportfalse
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                264. Evidence.statistic.attributeEstimate.id
                                Definition

                                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                ShortUnique id for inter-element referencing
                                Control0..1
                                This element is affected by the following invariants: ele-1
                                Typestring
                                Is Modifierfalse
                                XML FormatIn the XML format, this property is represented as an attribute.
                                Summaryfalse
                                266. Evidence.statistic.attributeEstimate.extension
                                Definition

                                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                ShortAdditional content defined by implementations
                                Comments

                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                Control0..*
                                TypeExtension
                                Is Modifierfalse
                                Summaryfalse
                                Alternate Namesextensions, user content
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                268. Evidence.statistic.attributeEstimate.modifierExtension
                                Definition

                                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                ShortExtensions that cannot be ignored even if unrecognized
                                Comments

                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                Control0..*
                                TypeExtension
                                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                Summarytrue
                                Requirements

                                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                Alternate Namesextensions, user content, modifiers
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                270. Evidence.statistic.attributeEstimate.description
                                Definition

                                Human-readable summary of the estimate.

                                ShortTextual description of the attribute estimate
                                Control0..1
                                Typemarkdown
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Must Supportfalse
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                272. Evidence.statistic.attributeEstimate.note
                                Definition

                                Footnote or explanatory note about the estimate.

                                ShortFootnote or explanatory note about the estimate
                                Control0..*
                                TypeAnnotation
                                Is Modifierfalse
                                Must Supportfalse
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                274. Evidence.statistic.attributeEstimate.type
                                Definition

                                The type of attribute estimate, e.g., confidence interval or p value.

                                ShortThe type of attribute estimate, e.g., confidence interval or p value
                                Control0..1
                                BindingUnless not suitable, these codes SHALL be taken from AttributeEstimateType
                                (extensible to http://hl7.org/fhir/ValueSet/attribute-estimate-type)
                                TypeCodeableConcept
                                Is Modifierfalse
                                Must Supportfalse
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                276. Evidence.statistic.attributeEstimate.quantity
                                Definition

                                The singular quantity of the attribute estimate, for attribute estimates represented as single values; also used to report unit of measure.

                                ShortThe singular quantity of the attribute estimate, for attribute estimates represented as single values; also used to report unit of measure
                                Comments

                                Often the p value

                                Control0..1
                                TypeQuantity
                                Is Modifierfalse
                                Must Supportfalse
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                278. Evidence.statistic.attributeEstimate.level
                                Definition

                                Use 95 for a 95% confidence interval.

                                ShortLevel of confidence interval, e.g., 0.95 for 95% confidence interval
                                Control0..1
                                Typedecimal
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Must Supportfalse
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                280. Evidence.statistic.attributeEstimate.range
                                Definition

                                Lower bound of confidence interval.

                                ShortLower and upper bound values of the attribute estimate
                                Control0..1
                                TypeRange
                                Is Modifierfalse
                                Must Supportfalse
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                282. Evidence.statistic.attributeEstimate.attributeEstimate
                                Definition

                                A nested attribute estimate; which is the attribute estimate of an attribute estimate.

                                ShortA nested attribute estimate; which is the attribute estimate of an attribute estimate
                                Comments

                                A nested attribute estimate; which is the attribute estimate of an attribute estimate

                                Control0..*
                                TypeSeettp://hl7.org/fhir/StructureDefinition/Evidence#Evidence.statistic.attributeEstimate
                                Is Modifierfalse
                                Must Supportfalse
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                284. Evidence.statistic.modelCharacteristic
                                Definition

                                A component of the method to generate the statistic.

                                ShortAn aspect of the statistical model
                                Control0..*
                                TypeBackboneElement
                                Is Modifierfalse
                                Must Supportfalse
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                286. Evidence.statistic.modelCharacteristic.id
                                Definition

                                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                ShortUnique id for inter-element referencing
                                Control0..1
                                This element is affected by the following invariants: ele-1
                                Typestring
                                Is Modifierfalse
                                XML FormatIn the XML format, this property is represented as an attribute.
                                Summaryfalse
                                288. Evidence.statistic.modelCharacteristic.extension
                                Definition

                                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                ShortAdditional content defined by implementations
                                Comments

                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                Control0..*
                                TypeExtension
                                Is Modifierfalse
                                Summaryfalse
                                Alternate Namesextensions, user content
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                290. Evidence.statistic.modelCharacteristic.modifierExtension
                                Definition

                                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                ShortExtensions that cannot be ignored even if unrecognized
                                Comments

                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                Control0..*
                                TypeExtension
                                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                Summarytrue
                                Requirements

                                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                Alternate Namesextensions, user content, modifiers
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                292. Evidence.statistic.modelCharacteristic.code
                                Definition

                                Description of a component of the method to generate the statistic.

                                ShortModel specification
                                Control1..1
                                BindingUnless not suitable, these codes SHALL be taken from StatisticModelCode
                                (extensible to http://hl7.org/fhir/ValueSet/statistic-model-code)
                                TypeCodeableConcept
                                Is Modifierfalse
                                Must Supportfalse
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                294. Evidence.statistic.modelCharacteristic.value[x]
                                Definition

                                Further specification of the value of the component of the method to generate the statistic.

                                ShortThe specific value (when paired with code)
                                Control0..1
                                TypeChoice of: Quantity(SimpleQuantity), Range, CodeableConcept
                                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                Is Modifierfalse
                                Must Supportfalse
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                296. Evidence.statistic.modelCharacteristic.intended
                                Definition

                                The plan for analysis.

                                ShortThe plan for analysis
                                Control0..1
                                Typeboolean
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Must Supportfalse
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                298. Evidence.statistic.modelCharacteristic.applied
                                Definition

                                The analysis that was applied.

                                ShortThe analysis that was applied
                                Control0..1
                                Typeboolean
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Must Supportfalse
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                300. Evidence.statistic.modelCharacteristic.variable
                                Definition

                                A variable adjusted for in the adjusted analysis.

                                ShortA variable adjusted for in the adjusted analysis
                                Control0..*
                                TypeBackboneElement
                                Is Modifierfalse
                                Must Supportfalse
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                302. Evidence.statistic.modelCharacteristic.variable.id
                                Definition

                                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                ShortUnique id for inter-element referencing
                                Control0..1
                                This element is affected by the following invariants: ele-1
                                Typestring
                                Is Modifierfalse
                                XML FormatIn the XML format, this property is represented as an attribute.
                                Summaryfalse
                                304. Evidence.statistic.modelCharacteristic.variable.extension
                                Definition

                                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                ShortAdditional content defined by implementations
                                Comments

                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                Control0..*
                                TypeExtension
                                Is Modifierfalse
                                Summaryfalse
                                Alternate Namesextensions, user content
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                306. Evidence.statistic.modelCharacteristic.variable.modifierExtension
                                Definition

                                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                ShortExtensions that cannot be ignored even if unrecognized
                                Comments

                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                Control0..*
                                TypeExtension
                                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                Summarytrue
                                Requirements

                                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                Alternate Namesextensions, user content, modifiers
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                308. Evidence.statistic.modelCharacteristic.variable.variableDefinition
                                Definition

                                Description of the variable.

                                ShortDescription of the variable
                                Control1..1
                                TypeReference(Group, EvidenceVariable)
                                Is Modifierfalse
                                Must Supportfalse
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                310. Evidence.statistic.modelCharacteristic.variable.handling
                                Definition

                                How the variable is classified for use in adjusted analysis.

                                Shortcontinuous | dichotomous | ordinal | polychotomous
                                Control0..1
                                BindingThe codes SHALL be taken from EvidenceVariableHandling
                                (required to http://hl7.org/fhir/ValueSet/variable-handling|6.0.0-ballot2)
                                Typecode
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Must Supportfalse
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                312. Evidence.statistic.modelCharacteristic.variable.valueCategory
                                Definition

                                Description for grouping of ordinal or polychotomous variables.

                                ShortDescription for grouping of ordinal or polychotomous variables
                                Control0..*
                                TypeCodeableConcept
                                Is Modifierfalse
                                Must Supportfalse
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                314. Evidence.statistic.modelCharacteristic.variable.valueQuantity
                                Definition

                                Discrete value for grouping of ordinal or polychotomous variables.

                                ShortDiscrete value for grouping of ordinal or polychotomous variables
                                Control0..*
                                TypeQuantity
                                Is Modifierfalse
                                Must Supportfalse
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                316. Evidence.statistic.modelCharacteristic.variable.valueRange
                                Definition

                                Range of values for grouping of ordinal or polychotomous variables.

                                ShortRange of values for grouping of ordinal or polychotomous variables
                                Control0..*
                                TypeRange
                                Is Modifierfalse
                                Must Supportfalse
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                318. Evidence.statistic.modelCharacteristic.attribute
                                Definition

                                An attribute of the statistic used as a model characteristic.

                                ShortAn attribute of the statistic used as a model characteristic
                                Control0..*
                                TypeSeettp://hl7.org/fhir/StructureDefinition/Evidence#Evidence.statistic.attributeEstimate
                                Is Modifierfalse
                                Must Supportfalse
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                320. Evidence.statistic:netEffect
                                Slice NamenetEffect
                                Definition

                                Values and parameters for a single statistic.

                                ShortValues and parameters for a single statistic
                                Control1..1
                                TypeBackboneElement
                                Is Modifierfalse
                                Must Supporttrue
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                322. Evidence.statistic:netEffect.id
                                Definition

                                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                ShortUnique id for inter-element referencing
                                Control0..1
                                This element is affected by the following invariants: ele-1
                                Typestring
                                Is Modifierfalse
                                XML FormatIn the XML format, this property is represented as an attribute.
                                Summaryfalse
                                324. Evidence.statistic:netEffect.extension
                                Definition

                                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                ShortAdditional content defined by implementations
                                Comments

                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                Control0..*
                                TypeExtension
                                Is Modifierfalse
                                Summaryfalse
                                Alternate Namesextensions, user content
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                326. Evidence.statistic:netEffect.modifierExtension
                                Definition

                                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                ShortExtensions that cannot be ignored even if unrecognized
                                Comments

                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                Control0..*
                                TypeExtension
                                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                Summarytrue
                                Requirements

                                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                Alternate Namesextensions, user content, modifiers
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                328. Evidence.statistic:netEffect.description
                                Definition

                                A description of the content value of the statistic.

                                ShortDescription of content
                                Control0..1
                                Typemarkdown
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Must Supportfalse
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                330. Evidence.statistic:netEffect.note
                                Definition

                                Footnotes and/or explanatory notes.

                                ShortFootnotes and/or explanatory notes
                                Control0..*
                                TypeAnnotation
                                Is Modifierfalse
                                Must Supportfalse
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                332. Evidence.statistic:netEffect.statisticType
                                Definition

                                Type of statistic, e.g., relative risk.

                                ShortType of statistic, e.g., relative risk
                                Control0..1
                                BindingUnless not suitable, these codes SHALL be taken from StatisticType
                                (extensible to http://hl7.org/fhir/ValueSet/statistic-type)
                                TypeCodeableConcept
                                Is Modifierfalse
                                Must Supportfalse
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                334. Evidence.statistic:netEffect.statisticType.id
                                Definition

                                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                ShortUnique id for inter-element referencing
                                Control0..1
                                This element is affected by the following invariants: ele-1
                                Typeid
                                Is Modifierfalse
                                XML FormatIn the XML format, this property is represented as an attribute.
                                Summaryfalse
                                336. Evidence.statistic:netEffect.statisticType.extension
                                Definition

                                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                ShortAdditional content defined by implementations
                                Comments

                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                Control0..*
                                TypeExtension
                                Is Modifierfalse
                                Summaryfalse
                                Alternate Namesextensions, user content
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                SlicingThis element introduces a set of slices on Evidence.statistic.statisticType.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                • value @ url
                                • 338. Evidence.statistic:netEffect.statisticType.coding
                                  Definition

                                  A reference to a code defined by a terminology system.

                                  ShortCode defined by a terminology system
                                  Comments

                                  Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

                                  Control1..1
                                  TypeCoding
                                  Is Modifierfalse
                                  Summaryfalse
                                  Requirements

                                  Allows for alternative encodings within a code system, and translations to other code systems.

                                  Pattern Value{
                                    "system" : "https://fevir.net/sevco",
                                    "code" : "STATO:0000424",
                                    "display" : "risk difference"
                                  }
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  340. Evidence.statistic:netEffect.statisticType.text
                                  Definition

                                  A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

                                  ShortPlain text representation of the concept
                                  Comments

                                  Very often the text is the same as a displayName of one of the codings.

                                  Control0..1
                                  Typestring
                                  Is Modifierfalse
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Summaryfalse
                                  Requirements

                                  The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  342. Evidence.statistic:netEffect.category
                                  Definition

                                  When the measured variable is handled categorically, the category element is used to define which category the statistic is reporting.

                                  ShortAssociated category for categorical variable
                                  Comments

                                  Simple strings can be used for descriptive purposes. Exact matching to EvidenceVariable.category.name for the Evidence.variableDefinition[variableRole=measuredVariable].observed=Reference(EvidenceVariable) could facilitate validation within datasets.

                                  Control0..1
                                  TypeCodeableConcept
                                  Is Modifierfalse
                                  Must Supportfalse
                                  Summaryfalse
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  344. Evidence.statistic:netEffect.quantity
                                  Definition

                                  Statistic value.

                                  ShortStatistic value
                                  Control0..1
                                  TypeQuantity
                                  Is Modifierfalse
                                  Must Supportfalse
                                  Summaryfalse
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  346. Evidence.statistic:netEffect.numberOfEvents
                                  Definition

                                  The number of events associated with the statistic, where the unit of analysis is different from numberAffected, sampleSize.knownDataCount and sampleSize.numberOfParticipants.

                                  ShortThe number of events associated with the statistic
                                  Comments

                                  When the number of events is the statistic, use Evidence.statistic.quantity and set Evidence.statistic.type.coding.code=C25463 and Evidence.statistic.type.coding.display=Count. When the statistic is an Event Rate (where individual participants may have 2 or more events), use Evidence.statistic.numberOfEvents to record the total number of events rather than the number of participants with events.

                                  Control0..1
                                  TypeunsignedInt
                                  Is Modifierfalse
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Must Supportfalse
                                  Summaryfalse
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  348. Evidence.statistic:netEffect.numberAffected
                                  Definition

                                  The number of participants affected where the unit of analysis is the same as sampleSize.knownDataCount and sampleSize.numberOfParticipants.

                                  ShortThe number of participants affected
                                  Comments

                                  When the number affected is the statistic, use Evidence.statistic.quantity and set Evidence.statistic.type.coding.code=C25463 and Evidence.statistic.type.coding.display=Count. When the statistic is a Proportion, use Evidence.statistic.numberAffected and enter an integer as the value. When the statistic is an Event Rate (where individual participants may have 2 or more events), use Evidence.statistic.numberAffected to record the number of participants with events rather than the total number of events.

                                  Control0..1
                                  TypeunsignedInt
                                  Is Modifierfalse
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Must Supportfalse
                                  Summaryfalse
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  350. Evidence.statistic:netEffect.sampleSize
                                  Definition

                                  Number of samples in the statistic.

                                  ShortNumber of samples in the statistic
                                  Control0..1
                                  TypeBackboneElement
                                  Is Modifierfalse
                                  Must Supportfalse
                                  Summaryfalse
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  352. Evidence.statistic:netEffect.sampleSize.id
                                  Definition

                                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                  ShortUnique id for inter-element referencing
                                  Control0..1
                                  This element is affected by the following invariants: ele-1
                                  Typestring
                                  Is Modifierfalse
                                  XML FormatIn the XML format, this property is represented as an attribute.
                                  Summaryfalse
                                  354. Evidence.statistic:netEffect.sampleSize.extension
                                  Definition

                                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                  ShortAdditional content defined by implementations
                                  Comments

                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                  Control0..*
                                  TypeExtension
                                  Is Modifierfalse
                                  Summaryfalse
                                  Alternate Namesextensions, user content
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  356. Evidence.statistic:netEffect.sampleSize.modifierExtension
                                  Definition

                                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                  ShortExtensions that cannot be ignored even if unrecognized
                                  Comments

                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                  Control0..*
                                  TypeExtension
                                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                  Summarytrue
                                  Requirements

                                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                  Alternate Namesextensions, user content, modifiers
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  358. Evidence.statistic:netEffect.sampleSize.description
                                  Definition

                                  Human-readable summary of population sample size.

                                  ShortTextual description of sample size for statistic
                                  Control0..1
                                  Typemarkdown
                                  Is Modifierfalse
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Must Supportfalse
                                  Summaryfalse
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  360. Evidence.statistic:netEffect.sampleSize.note
                                  Definition

                                  Footnote or explanatory note about the sample size.

                                  ShortFootnote or explanatory note about the sample size
                                  Control0..*
                                  TypeAnnotation
                                  Is Modifierfalse
                                  Must Supportfalse
                                  Summaryfalse
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  362. Evidence.statistic:netEffect.sampleSize.numberOfStudies
                                  Definition

                                  Number of participants in the population.

                                  ShortNumber of contributing studies
                                  Control0..1
                                  TypeunsignedInt
                                  Is Modifierfalse
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Must Supportfalse
                                  Summaryfalse
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  364. Evidence.statistic:netEffect.sampleSize.numberOfParticipants
                                  Definition

                                  A human-readable string to clarify or explain concepts about the sample size.

                                  ShortCumulative number of participants
                                  Control0..1
                                  TypeunsignedInt
                                  Is Modifierfalse
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Must Supportfalse
                                  Summaryfalse
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  366. Evidence.statistic:netEffect.sampleSize.knownDataCount
                                  Definition

                                  Number of participants with known results for measured variables.

                                  ShortNumber of participants with known results for measured variables
                                  Control0..1
                                  TypeunsignedInt
                                  Is Modifierfalse
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Must Supportfalse
                                  Summaryfalse
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  368. Evidence.statistic:netEffect.attributeEstimate
                                  Definition

                                  A statistical attribute of the statistic such as a measure of heterogeneity.

                                  ShortAn attribute of the Statistic
                                  Control1..*
                                  TypeBackboneElement
                                  Is Modifierfalse
                                  Must Supportfalse
                                  Summaryfalse
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  SlicingThis element introduces a set of slices on Evidence.statistic.attributeEstimate. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                  • value @ type.coding
                                  • 370. Evidence.statistic:netEffect.attributeEstimate.id
                                    Definition

                                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                    ShortUnique id for inter-element referencing
                                    Control0..1
                                    This element is affected by the following invariants: ele-1
                                    Typestring
                                    Is Modifierfalse
                                    XML FormatIn the XML format, this property is represented as an attribute.
                                    Summaryfalse
                                    372. Evidence.statistic:netEffect.attributeEstimate.extension
                                    Definition

                                    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                    ShortAdditional content defined by implementations
                                    Comments

                                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                    Control0..*
                                    TypeExtension
                                    Is Modifierfalse
                                    Summaryfalse
                                    Alternate Namesextensions, user content
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    374. Evidence.statistic:netEffect.attributeEstimate.modifierExtension
                                    Definition

                                    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                    ShortExtensions that cannot be ignored even if unrecognized
                                    Comments

                                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                    Control0..*
                                    TypeExtension
                                    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                    Summarytrue
                                    Requirements

                                    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                    Alternate Namesextensions, user content, modifiers
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    376. Evidence.statistic:netEffect.attributeEstimate.description
                                    Definition

                                    Human-readable summary of the estimate.

                                    ShortTextual description of the attribute estimate
                                    Control0..1
                                    Typemarkdown
                                    Is Modifierfalse
                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                    Must Supportfalse
                                    Summaryfalse
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    378. Evidence.statistic:netEffect.attributeEstimate.note
                                    Definition

                                    Footnote or explanatory note about the estimate.

                                    ShortFootnote or explanatory note about the estimate
                                    Control0..*
                                    TypeAnnotation
                                    Is Modifierfalse
                                    Must Supportfalse
                                    Summaryfalse
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    380. Evidence.statistic:netEffect.attributeEstimate.type
                                    Definition

                                    The type of attribute estimate, e.g., confidence interval or p value.

                                    ShortThe type of attribute estimate, e.g., confidence interval or p value
                                    Control0..1
                                    BindingUnless not suitable, these codes SHALL be taken from AttributeEstimateType
                                    (extensible to http://hl7.org/fhir/ValueSet/attribute-estimate-type)
                                    TypeCodeableConcept
                                    Is Modifierfalse
                                    Must Supportfalse
                                    Summaryfalse
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    382. Evidence.statistic:netEffect.attributeEstimate.quantity
                                    Definition

                                    The singular quantity of the attribute estimate, for attribute estimates represented as single values; also used to report unit of measure.

                                    ShortThe singular quantity of the attribute estimate, for attribute estimates represented as single values; also used to report unit of measure
                                    Comments

                                    Often the p value

                                    Control0..1
                                    TypeQuantity
                                    Is Modifierfalse
                                    Must Supportfalse
                                    Summaryfalse
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    384. Evidence.statistic:netEffect.attributeEstimate.level
                                    Definition

                                    Use 95 for a 95% confidence interval.

                                    ShortLevel of confidence interval, e.g., 0.95 for 95% confidence interval
                                    Control0..1
                                    Typedecimal
                                    Is Modifierfalse
                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                    Must Supportfalse
                                    Summaryfalse
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    386. Evidence.statistic:netEffect.attributeEstimate.range
                                    Definition

                                    Lower bound of confidence interval.

                                    ShortLower and upper bound values of the attribute estimate
                                    Control0..1
                                    TypeRange
                                    Is Modifierfalse
                                    Must Supportfalse
                                    Summaryfalse
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    388. Evidence.statistic:netEffect.attributeEstimate.attributeEstimate
                                    Definition

                                    A nested attribute estimate; which is the attribute estimate of an attribute estimate.

                                    ShortA nested attribute estimate; which is the attribute estimate of an attribute estimate
                                    Comments

                                    A nested attribute estimate; which is the attribute estimate of an attribute estimate

                                    Control0..*
                                    TypeSeettp://hl7.org/fhir/StructureDefinition/Evidence#Evidence.statistic.attributeEstimate
                                    Is Modifierfalse
                                    Must Supportfalse
                                    Summaryfalse
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    390. Evidence.statistic:netEffect.attributeEstimate:confidenceInterval
                                    Slice NameconfidenceInterval
                                    Definition

                                    A statistical attribute of the statistic such as a measure of heterogeneity.

                                    ShortAn attribute of the Statistic
                                    Control1..1
                                    TypeBackboneElement
                                    Is Modifierfalse
                                    Must Supporttrue
                                    Summaryfalse
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    392. Evidence.statistic:netEffect.attributeEstimate:confidenceInterval.id
                                    Definition

                                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                    ShortUnique id for inter-element referencing
                                    Control0..1
                                    This element is affected by the following invariants: ele-1
                                    Typestring
                                    Is Modifierfalse
                                    XML FormatIn the XML format, this property is represented as an attribute.
                                    Summaryfalse
                                    394. Evidence.statistic:netEffect.attributeEstimate:confidenceInterval.extension
                                    Definition

                                    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                    ShortAdditional content defined by implementations
                                    Comments

                                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                    Control0..*
                                    TypeExtension
                                    Is Modifierfalse
                                    Summaryfalse
                                    Alternate Namesextensions, user content
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    396. Evidence.statistic:netEffect.attributeEstimate:confidenceInterval.modifierExtension
                                    Definition

                                    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                    ShortExtensions that cannot be ignored even if unrecognized
                                    Comments

                                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                    Control0..*
                                    TypeExtension
                                    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                    Summarytrue
                                    Requirements

                                    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                    Alternate Namesextensions, user content, modifiers
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    398. Evidence.statistic:netEffect.attributeEstimate:confidenceInterval.description
                                    Definition

                                    Human-readable summary of the estimate.

                                    ShortTextual description of the attribute estimate
                                    Control0..1
                                    Typemarkdown
                                    Is Modifierfalse
                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                    Must Supportfalse
                                    Summaryfalse
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    400. Evidence.statistic:netEffect.attributeEstimate:confidenceInterval.note
                                    Definition

                                    Footnote or explanatory note about the estimate.

                                    ShortFootnote or explanatory note about the estimate
                                    Control0..*
                                    TypeAnnotation
                                    Is Modifierfalse
                                    Must Supportfalse
                                    Summaryfalse
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    402. Evidence.statistic:netEffect.attributeEstimate:confidenceInterval.type
                                    Definition

                                    The type of attribute estimate, e.g., confidence interval or p value.

                                    ShortThe type of attribute estimate, e.g., confidence interval or p value
                                    Control0..1
                                    BindingUnless not suitable, these codes SHALL be taken from AttributeEstimateType
                                    (extensible to http://hl7.org/fhir/ValueSet/attribute-estimate-type)
                                    TypeCodeableConcept
                                    Is Modifierfalse
                                    Must Supportfalse
                                    Summaryfalse
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    404. Evidence.statistic:netEffect.attributeEstimate:confidenceInterval.type.id
                                    Definition

                                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                    ShortUnique id for inter-element referencing
                                    Control0..1
                                    This element is affected by the following invariants: ele-1
                                    Typeid
                                    Is Modifierfalse
                                    XML FormatIn the XML format, this property is represented as an attribute.
                                    Summaryfalse
                                    406. Evidence.statistic:netEffect.attributeEstimate:confidenceInterval.type.extension
                                    Definition

                                    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                    ShortAdditional content defined by implementations
                                    Comments

                                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                    Control0..*
                                    TypeExtension
                                    Is Modifierfalse
                                    Summaryfalse
                                    Alternate Namesextensions, user content
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    SlicingThis element introduces a set of slices on Evidence.statistic.attributeEstimate.type.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                    • value @ url
                                    • 408. Evidence.statistic:netEffect.attributeEstimate:confidenceInterval.type.coding
                                      Definition

                                      A reference to a code defined by a terminology system.

                                      ShortCode defined by a terminology system
                                      Comments

                                      Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

                                      Control1..1
                                      TypeCoding
                                      Is Modifierfalse
                                      Summaryfalse
                                      Requirements

                                      Allows for alternative encodings within a code system, and translations to other code systems.

                                      Pattern Value{
                                        "system" : "https://fevir.net/sevco",
                                        "code" : "STATO:0000196",
                                        "display" : "confidence interval"
                                      }
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      410. Evidence.statistic:netEffect.attributeEstimate:confidenceInterval.type.text
                                      Definition

                                      A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

                                      ShortPlain text representation of the concept
                                      Comments

                                      Very often the text is the same as a displayName of one of the codings.

                                      Control0..1
                                      Typestring
                                      Is Modifierfalse
                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                      Summaryfalse
                                      Requirements

                                      The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      412. Evidence.statistic:netEffect.attributeEstimate:confidenceInterval.quantity
                                      Definition

                                      The singular quantity of the attribute estimate, for attribute estimates represented as single values; also used to report unit of measure.

                                      ShortThe singular quantity of the attribute estimate, for attribute estimates represented as single values; also used to report unit of measure
                                      Comments

                                      Often the p value

                                      Control0..1
                                      TypeQuantity
                                      Is Modifierfalse
                                      Must Supportfalse
                                      Summaryfalse
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      414. Evidence.statistic:netEffect.attributeEstimate:confidenceInterval.level
                                      Definition

                                      Use 95 for a 95% confidence interval.

                                      ShortLevel of confidence interval, e.g., 0.95 for 95% confidence interval
                                      Control0..1
                                      Typedecimal
                                      Is Modifierfalse
                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                      Must Supportfalse
                                      Summaryfalse
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      416. Evidence.statistic:netEffect.attributeEstimate:confidenceInterval.range
                                      Definition

                                      Lower bound of confidence interval.

                                      ShortLower and upper bound values of the attribute estimate
                                      Control0..1
                                      TypeRange
                                      Is Modifierfalse
                                      Must Supportfalse
                                      Summaryfalse
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      418. Evidence.statistic:netEffect.attributeEstimate:confidenceInterval.attributeEstimate
                                      Definition

                                      A nested attribute estimate; which is the attribute estimate of an attribute estimate.

                                      ShortA nested attribute estimate; which is the attribute estimate of an attribute estimate
                                      Comments

                                      A nested attribute estimate; which is the attribute estimate of an attribute estimate

                                      Control0..*
                                      TypeSeettp://hl7.org/fhir/StructureDefinition/Evidence#Evidence.statistic.attributeEstimate
                                      Is Modifierfalse
                                      Must Supportfalse
                                      Summaryfalse
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      420. Evidence.statistic:netEffect.modelCharacteristic
                                      Definition

                                      A component of the method to generate the statistic.

                                      ShortAn aspect of the statistical model
                                      Control1..*
                                      TypeBackboneElement
                                      Is Modifierfalse
                                      Must Supportfalse
                                      Summaryfalse
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      SlicingThis element introduces a set of slices on Evidence.statistic.modelCharacteristic. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                      • value @ code.text
                                      • 422. Evidence.statistic:netEffect.modelCharacteristic.id
                                        Definition

                                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                        ShortUnique id for inter-element referencing
                                        Control0..1
                                        This element is affected by the following invariants: ele-1
                                        Typestring
                                        Is Modifierfalse
                                        XML FormatIn the XML format, this property is represented as an attribute.
                                        Summaryfalse
                                        424. Evidence.statistic:netEffect.modelCharacteristic.extension
                                        Definition

                                        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                        ShortAdditional content defined by implementations
                                        Comments

                                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                        Control0..*
                                        TypeExtension
                                        Is Modifierfalse
                                        Summaryfalse
                                        Alternate Namesextensions, user content
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        426. Evidence.statistic:netEffect.modelCharacteristic.modifierExtension
                                        Definition

                                        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                        ShortExtensions that cannot be ignored even if unrecognized
                                        Comments

                                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                        Control0..*
                                        TypeExtension
                                        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                        Summarytrue
                                        Requirements

                                        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                        Alternate Namesextensions, user content, modifiers
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        428. Evidence.statistic:netEffect.modelCharacteristic.code
                                        Definition

                                        Description of a component of the method to generate the statistic.

                                        ShortModel specification
                                        Control1..1
                                        BindingUnless not suitable, these codes SHALL be taken from StatisticModelCode
                                        (extensible to http://hl7.org/fhir/ValueSet/statistic-model-code)
                                        TypeCodeableConcept
                                        Is Modifierfalse
                                        Must Supportfalse
                                        Summaryfalse
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        430. Evidence.statistic:netEffect.modelCharacteristic.value[x]
                                        Definition

                                        Further specification of the value of the component of the method to generate the statistic.

                                        ShortThe specific value (when paired with code)
                                        Control0..1
                                        TypeChoice of: Quantity(SimpleQuantity), Range, CodeableConcept
                                        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                        Is Modifierfalse
                                        Must Supportfalse
                                        Summaryfalse
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        432. Evidence.statistic:netEffect.modelCharacteristic.intended
                                        Definition

                                        The plan for analysis.

                                        ShortThe plan for analysis
                                        Control0..1
                                        Typeboolean
                                        Is Modifierfalse
                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                        Must Supportfalse
                                        Summaryfalse
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        434. Evidence.statistic:netEffect.modelCharacteristic.applied
                                        Definition

                                        The analysis that was applied.

                                        ShortThe analysis that was applied
                                        Control0..1
                                        Typeboolean
                                        Is Modifierfalse
                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                        Must Supportfalse
                                        Summaryfalse
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        436. Evidence.statistic:netEffect.modelCharacteristic.variable
                                        Definition

                                        A variable adjusted for in the adjusted analysis.

                                        ShortA variable adjusted for in the adjusted analysis
                                        Control0..*
                                        TypeBackboneElement
                                        Is Modifierfalse
                                        Must Supportfalse
                                        Summaryfalse
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        438. Evidence.statistic:netEffect.modelCharacteristic.variable.id
                                        Definition

                                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                        ShortUnique id for inter-element referencing
                                        Control0..1
                                        This element is affected by the following invariants: ele-1
                                        Typestring
                                        Is Modifierfalse
                                        XML FormatIn the XML format, this property is represented as an attribute.
                                        Summaryfalse
                                        440. Evidence.statistic:netEffect.modelCharacteristic.variable.extension
                                        Definition

                                        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                        ShortAdditional content defined by implementations
                                        Comments

                                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                        Control0..*
                                        TypeExtension
                                        Is Modifierfalse
                                        Summaryfalse
                                        Alternate Namesextensions, user content
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        442. Evidence.statistic:netEffect.modelCharacteristic.variable.modifierExtension
                                        Definition

                                        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                        ShortExtensions that cannot be ignored even if unrecognized
                                        Comments

                                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                        Control0..*
                                        TypeExtension
                                        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                        Summarytrue
                                        Requirements

                                        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                        Alternate Namesextensions, user content, modifiers
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        444. Evidence.statistic:netEffect.modelCharacteristic.variable.variableDefinition
                                        Definition

                                        Description of the variable.

                                        ShortDescription of the variable
                                        Control1..1
                                        TypeReference(Group, EvidenceVariable)
                                        Is Modifierfalse
                                        Must Supportfalse
                                        Summaryfalse
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        446. Evidence.statistic:netEffect.modelCharacteristic.variable.handling
                                        Definition

                                        How the variable is classified for use in adjusted analysis.

                                        Shortcontinuous | dichotomous | ordinal | polychotomous
                                        Control0..1
                                        BindingThe codes SHALL be taken from EvidenceVariableHandling
                                        (required to http://hl7.org/fhir/ValueSet/variable-handling|6.0.0-ballot2)
                                        Typecode
                                        Is Modifierfalse
                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                        Must Supportfalse
                                        Summaryfalse
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        448. Evidence.statistic:netEffect.modelCharacteristic.variable.valueCategory
                                        Definition

                                        Description for grouping of ordinal or polychotomous variables.

                                        ShortDescription for grouping of ordinal or polychotomous variables
                                        Control0..*
                                        TypeCodeableConcept
                                        Is Modifierfalse
                                        Must Supportfalse
                                        Summaryfalse
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        450. Evidence.statistic:netEffect.modelCharacteristic.variable.valueQuantity
                                        Definition

                                        Discrete value for grouping of ordinal or polychotomous variables.

                                        ShortDiscrete value for grouping of ordinal or polychotomous variables
                                        Control0..*
                                        TypeQuantity
                                        Is Modifierfalse
                                        Must Supportfalse
                                        Summaryfalse
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        452. Evidence.statistic:netEffect.modelCharacteristic.variable.valueRange
                                        Definition

                                        Range of values for grouping of ordinal or polychotomous variables.

                                        ShortRange of values for grouping of ordinal or polychotomous variables
                                        Control0..*
                                        TypeRange
                                        Is Modifierfalse
                                        Must Supportfalse
                                        Summaryfalse
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        454. Evidence.statistic:netEffect.modelCharacteristic.attribute
                                        Definition

                                        An attribute of the statistic used as a model characteristic.

                                        ShortAn attribute of the statistic used as a model characteristic
                                        Control0..*
                                        TypeSeettp://hl7.org/fhir/StructureDefinition/Evidence#Evidence.statistic.attributeEstimate
                                        Is Modifierfalse
                                        Must Supportfalse
                                        Summaryfalse
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        456. Evidence.statistic:netEffect.modelCharacteristic:netEffectContributionAnalysis
                                        Slice NamenetEffectContributionAnalysis
                                        Definition

                                        A component of the method to generate the statistic.

                                        ShortAn aspect of the statistical model
                                        Control1..1
                                        TypeBackboneElement
                                        Is Modifierfalse
                                        Must Supporttrue
                                        Summaryfalse
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        458. Evidence.statistic:netEffect.modelCharacteristic:netEffectContributionAnalysis.id
                                        Definition

                                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                        ShortUnique id for inter-element referencing
                                        Control0..1
                                        This element is affected by the following invariants: ele-1
                                        Typestring
                                        Is Modifierfalse
                                        XML FormatIn the XML format, this property is represented as an attribute.
                                        Summaryfalse
                                        460. Evidence.statistic:netEffect.modelCharacteristic:netEffectContributionAnalysis.extension
                                        Definition

                                        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                        ShortAdditional content defined by implementations
                                        Comments

                                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                        Control0..*
                                        TypeExtension
                                        Is Modifierfalse
                                        Summaryfalse
                                        Alternate Namesextensions, user content
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        462. Evidence.statistic:netEffect.modelCharacteristic:netEffectContributionAnalysis.modifierExtension
                                        Definition

                                        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                        ShortExtensions that cannot be ignored even if unrecognized
                                        Comments

                                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                        Control0..*
                                        TypeExtension
                                        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                        Summarytrue
                                        Requirements

                                        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                        Alternate Namesextensions, user content, modifiers
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        464. Evidence.statistic:netEffect.modelCharacteristic:netEffectContributionAnalysis.code
                                        Definition

                                        Description of a component of the method to generate the statistic.

                                        ShortModel specification
                                        Control1..1
                                        BindingUnless not suitable, these codes SHALL be taken from StatisticModelCode
                                        (extensible to http://hl7.org/fhir/ValueSet/statistic-model-code)
                                        TypeCodeableConcept
                                        Is Modifierfalse
                                        Must Supportfalse
                                        Summaryfalse
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        466. Evidence.statistic:netEffect.modelCharacteristic:netEffectContributionAnalysis.code.id
                                        Definition

                                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                        ShortUnique id for inter-element referencing
                                        Control0..1
                                        This element is affected by the following invariants: ele-1
                                        Typeid
                                        Is Modifierfalse
                                        XML FormatIn the XML format, this property is represented as an attribute.
                                        Summaryfalse
                                        468. Evidence.statistic:netEffect.modelCharacteristic:netEffectContributionAnalysis.code.extension
                                        Definition

                                        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                        ShortAdditional content defined by implementations
                                        Comments

                                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                        Control0..*
                                        TypeExtension
                                        Is Modifierfalse
                                        Summaryfalse
                                        Alternate Namesextensions, user content
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        SlicingThis element introduces a set of slices on Evidence.statistic.modelCharacteristic.code.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                        • value @ url
                                        • 470. Evidence.statistic:netEffect.modelCharacteristic:netEffectContributionAnalysis.code.coding
                                          Definition

                                          A reference to a code defined by a terminology system.

                                          ShortCode defined by a terminology system
                                          Comments

                                          Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

                                          Control0..*
                                          TypeCoding
                                          Is Modifierfalse
                                          Summaryfalse
                                          Requirements

                                          Allows for alternative encodings within a code system, and translations to other code systems.

                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          472. Evidence.statistic:netEffect.modelCharacteristic:netEffectContributionAnalysis.code.text
                                          Definition

                                          A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

                                          ShortPlain text representation of the concept
                                          Comments

                                          Very often the text is the same as a displayName of one of the codings.

                                          Control1..1
                                          Typestring
                                          Is Modifierfalse
                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                          Summaryfalse
                                          Requirements

                                          The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

                                          Pattern ValueNet effect contribution analysis
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          474. Evidence.statistic:netEffect.modelCharacteristic:netEffectContributionAnalysis.value[x]
                                          Definition

                                          Further specification of the value of the component of the method to generate the statistic.

                                          ShortThe specific value (when paired with code)
                                          Control0..1
                                          TypeChoice of: Quantity(SimpleQuantity), Range, CodeableConcept
                                          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                          Is Modifierfalse
                                          Must Supportfalse
                                          Summaryfalse
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          476. Evidence.statistic:netEffect.modelCharacteristic:netEffectContributionAnalysis.intended
                                          Definition

                                          The plan for analysis.

                                          ShortThe plan for analysis
                                          Control0..1
                                          Typeboolean
                                          Is Modifierfalse
                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                          Must Supportfalse
                                          Summaryfalse
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          478. Evidence.statistic:netEffect.modelCharacteristic:netEffectContributionAnalysis.applied
                                          Definition

                                          The analysis that was applied.

                                          ShortThe analysis that was applied
                                          Control0..1
                                          Typeboolean
                                          Is Modifierfalse
                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                          Must Supportfalse
                                          Summaryfalse
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          480. Evidence.statistic:netEffect.modelCharacteristic:netEffectContributionAnalysis.variable
                                          Definition

                                          A variable adjusted for in the adjusted analysis.

                                          ShortA variable adjusted for in the adjusted analysis
                                          Control0..*
                                          TypeBackboneElement
                                          Is Modifierfalse
                                          Must Supportfalse
                                          Summaryfalse
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          482. Evidence.statistic:netEffect.modelCharacteristic:netEffectContributionAnalysis.variable.id
                                          Definition

                                          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                          ShortUnique id for inter-element referencing
                                          Control0..1
                                          This element is affected by the following invariants: ele-1
                                          Typestring
                                          Is Modifierfalse
                                          XML FormatIn the XML format, this property is represented as an attribute.
                                          Summaryfalse
                                          484. Evidence.statistic:netEffect.modelCharacteristic:netEffectContributionAnalysis.variable.extension
                                          Definition

                                          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                          ShortAdditional content defined by implementations
                                          Comments

                                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                          Control0..*
                                          TypeExtension
                                          Is Modifierfalse
                                          Summaryfalse
                                          Alternate Namesextensions, user content
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          486. Evidence.statistic:netEffect.modelCharacteristic:netEffectContributionAnalysis.variable.modifierExtension
                                          Definition

                                          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                          ShortExtensions that cannot be ignored even if unrecognized
                                          Comments

                                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                          Control0..*
                                          TypeExtension
                                          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                          Summarytrue
                                          Requirements

                                          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                          Alternate Namesextensions, user content, modifiers
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          488. Evidence.statistic:netEffect.modelCharacteristic:netEffectContributionAnalysis.variable.variableDefinition
                                          Definition

                                          Description of the variable.

                                          ShortDescription of the variable
                                          Control1..1
                                          TypeReference(Group, EvidenceVariable)
                                          Is Modifierfalse
                                          Must Supportfalse
                                          Summaryfalse
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          490. Evidence.statistic:netEffect.modelCharacteristic:netEffectContributionAnalysis.variable.handling
                                          Definition

                                          How the variable is classified for use in adjusted analysis.

                                          Shortcontinuous | dichotomous | ordinal | polychotomous
                                          Control0..1
                                          BindingThe codes SHALL be taken from EvidenceVariableHandling
                                          (required to http://hl7.org/fhir/ValueSet/variable-handling|6.0.0-ballot2)
                                          Typecode
                                          Is Modifierfalse
                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                          Must Supportfalse
                                          Summaryfalse
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          492. Evidence.statistic:netEffect.modelCharacteristic:netEffectContributionAnalysis.variable.valueCategory
                                          Definition

                                          Description for grouping of ordinal or polychotomous variables.

                                          ShortDescription for grouping of ordinal or polychotomous variables
                                          Control0..*
                                          TypeCodeableConcept
                                          Is Modifierfalse
                                          Must Supportfalse
                                          Summaryfalse
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          494. Evidence.statistic:netEffect.modelCharacteristic:netEffectContributionAnalysis.variable.valueQuantity
                                          Definition

                                          Discrete value for grouping of ordinal or polychotomous variables.

                                          ShortDiscrete value for grouping of ordinal or polychotomous variables
                                          Control0..*
                                          TypeQuantity
                                          Is Modifierfalse
                                          Must Supportfalse
                                          Summaryfalse
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          496. Evidence.statistic:netEffect.modelCharacteristic:netEffectContributionAnalysis.variable.valueRange
                                          Definition

                                          Range of values for grouping of ordinal or polychotomous variables.

                                          ShortRange of values for grouping of ordinal or polychotomous variables
                                          Control0..*
                                          TypeRange
                                          Is Modifierfalse
                                          Must Supportfalse
                                          Summaryfalse
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          498. Evidence.statistic:netEffect.modelCharacteristic:netEffectContributionAnalysis.attribute
                                          Definition

                                          An attribute of the statistic used as a model characteristic.

                                          ShortAn attribute of the statistic used as a model characteristic
                                          Control0..*
                                          TypeSeettp://hl7.org/fhir/StructureDefinition/Evidence#Evidence.statistic.attributeEstimate
                                          Is Modifierfalse
                                          Must Supportfalse
                                          Summaryfalse
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          500. Evidence.certainty
                                          Definition

                                          Assessment of certainty, confidence in the estimates, or quality of the evidence.

                                          ShortCertainty or quality of the evidence
                                          Control0..*
                                          TypeBackboneElement
                                          Is Modifierfalse
                                          Must Supportfalse
                                          Summaryfalse
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          502. Evidence.certainty.id
                                          Definition

                                          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                          ShortUnique id for inter-element referencing
                                          Control0..1
                                          This element is affected by the following invariants: ele-1
                                          Typestring
                                          Is Modifierfalse
                                          XML FormatIn the XML format, this property is represented as an attribute.
                                          Summaryfalse
                                          504. Evidence.certainty.extension
                                          Definition

                                          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                          ShortAdditional content defined by implementations
                                          Comments

                                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                          Control0..*
                                          TypeExtension
                                          Is Modifierfalse
                                          Summaryfalse
                                          Alternate Namesextensions, user content
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          506. Evidence.certainty.modifierExtension
                                          Definition

                                          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                          ShortExtensions that cannot be ignored even if unrecognized
                                          Comments

                                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                          Control0..*
                                          TypeExtension
                                          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                          Summarytrue
                                          Requirements

                                          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                          Alternate Namesextensions, user content, modifiers
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          508. Evidence.certainty.description
                                          Definition

                                          Textual description of certainty.

                                          ShortTextual description of certainty
                                          Control0..1
                                          Typemarkdown
                                          Is Modifierfalse
                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                          Must Supportfalse
                                          Summaryfalse
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          510. Evidence.certainty.note
                                          Definition

                                          Footnotes and/or explanatory notes.

                                          ShortFootnotes and/or explanatory notes
                                          Control0..*
                                          TypeAnnotation
                                          Is Modifierfalse
                                          Must Supportfalse
                                          Summaryfalse
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          512. Evidence.certainty.type
                                          Definition

                                          Aspect of certainty being rated.

                                          ShortAspect of certainty being rated
                                          Control0..1
                                          BindingUnless not suitable, these codes SHALL be taken from EvidenceCertaintyType
                                          (extensible to http://hl7.org/fhir/ValueSet/certainty-type)

                                          The aspect of quality, confidence, or certainty.

                                          TypeCodeableConcept
                                          Is Modifierfalse
                                          Must Supportfalse
                                          Summaryfalse
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          514. Evidence.certainty.rating
                                          Definition

                                          Assessment or judgement of the aspect.

                                          ShortAssessment or judgement of the aspect
                                          Control0..1
                                          BindingUnless not suitable, these codes SHALL be taken from EvidenceCertaintyRating
                                          (extensible to http://hl7.org/fhir/ValueSet/certainty-rating)

                                          The assessment of quality, confidence, or certainty.

                                          TypeCodeableConcept
                                          Is Modifierfalse
                                          Must Supportfalse
                                          Summaryfalse
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          516. Evidence.certainty.rater
                                          Definition

                                          Individual or group who did the rating.

                                          ShortIndividual or group who did the rating
                                          Control0..1
                                          Typestring
                                          Is Modifierfalse
                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                          Must Supportfalse
                                          Summaryfalse
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          518. Evidence.certainty.subcomponent
                                          Definition

                                          A domain or subdomain of certainty.

                                          ShortA domain or subdomain of certainty
                                          Control0..*
                                          TypeSeettp://hl7.org/fhir/StructureDefinition/Evidence#Evidence.certainty
                                          Is Modifierfalse
                                          Must Supportfalse
                                          Summaryfalse
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))